Search Results

Search found 3649 results on 146 pages for 'aziz light'.

Page 102/146 | < Previous Page | 98 99 100 101 102 103 104 105 106 107 108 109  | Next Page >

• RAID 5 - DELL 2850 and others

  - by Kiara

  I have installed Ubuntu on a DELL 2850 and I have configured an array of 5 disks (SCSI 73GB 10K) in RAID5. I wanted to simulate a drive error so in the middle of something I just took one of the drives out and put it back again after a bit. Then the drive shows an orange light and seems to be rebuilding but actually is taking hours and hours with no results. So I went to the PERC utility (Ctrl+M) and the disk shows "REBLD". But it never gets to an online state. So I went to Objects - Physical drives - Rebuilding - View rebuild process. And in here I can see a bar moving from 0%... but if I reboot before finishing and get into the PERC Utility again, it seems to start again rebuilding from 0% - so it is not rebuilding automatically. My concern is: what would happen in a real situation? Do I have to just switch the server off and go to the Perc utility to start the rebuilding manually? I thought the whole point was to have this done automatically and without the need of stopping the server. Or does it perhaps rebuild automatically indeed but needs to have enough time without rebooting because otherwise the rebuilding process will start from scratch? It seems to take more than 3h for a 73gb disk! My second question is: can I mix then hard drives? So if I have a RAID of 5x73GB 10K can I use different size (146GB) or speeds (15K)? Apparently someone said it is OK in here Poweredge 2850: replace disk with larger in RAID?

  Read the article

• JBossMQ - Clustered Queues/NameNotFoundException: QueueConnectionFactory error

  - by mfarver

  I am trying to get an application working on a JBoss Cluster. It uses Queues internally, and the developer claims that it should work correctly in a clustered environment. I have jbossmq setup as a ha-singleton on the cluster. The application works correctly on whichever node currently is running the queue, but fails on the other nodes with a: "javax.naming.NameNotFoundException: QueueConnectionFactory not bound" error. I can look at JNDIview from the jmx-console and see that indeed the QueueConnectionFactory class only appears on the primary node in the Global context. Is there a way to see the Cluster's JNDI listing instead of each server? The steps I took from a default Jboss 4.2.3.GA installation were to use the "all" configuration. Then removed /server/all/deploy/hsqldb-ds.xml and /deploy-hasingleton/jms/hsqldb-jdbc2-service.xml, copying the example/jms/mysq-jdbc2-service.xml file into its place (editing that file to use DefaultDS instead of MySqlDS). Finally I created a mysql-ds.xml file in the deploy directory pointing "DefaultDS" at an empty database. I created a -services.xml file in the deploy directory with the queue definition. like the one below: <server> <mbean code="org.jboss.mq.server.jmx.Queue" name="jboss.mq.destination:service=Queue,name=myfirstqueue"> <depends optional-attribute-name="DestinationManager"> jboss.mq:service=DestinationManager </depends> </mbean> </server> All of the other cluster features of working, the servers list each other in the view, and sessions are replicating back and forth. The JBoss documentation is somewhat light in this area, is there another setting I might have missed? Or is this likely to be a code issue (is there different code to do a JNDI lookup in a clusted environment?) Thanks

  Read the article

• How to know if your computer is hit by a dnschanger virus?

  - by kira

  The Federal Bureau of Investigation (FBI) is on the final stage of its Operation Ghost Click, which strikes against the menace of the DNSChanger virus and trojan. Infected PCs running the DNSChanger malware at unawares are in the danger of going offline on this coming Monday (July 9) when the FBI plans to pull down the online servers that communicate with the virus on host computers. After gaining access to a host PC, the DNSChanger virus tries to modify the DNS (Domain Name Server) settings, which are essential for Internet access, to send traffic to malicious servers. These poisoned web addresses in turn point traffic generated through infected PCs to fake or unsafe websites, most of them running online scams. There are also reports that the DNSChanger virus also acts as a trojan, allowing perpetrators of the hack attack to gain access to infected PCs. Google issued a general advisory for netizens in May earlier this year to detect and remove DNSChanger from infected PCs. According to our report, some 5 lakh PCs were still infected by the DNSChanger virus in May 2012. The first report of the DNSChanger virus and its affiliation with an international group of hackers first came to light towards the end of last year, and the FBI has been chasing them down ever since. The group behind the DNSChanger virus is estimated to have infected close to 4 million PCs around the world in 2011, until the FBI shut them down in November. In the last stage of Operation Ghost Click, the FBI plans to pull the plug and bring down the temporary rogue DNS servers on Monday, July 9, according to an official announcement. As a result, PCs still infected by the DNSChanger virus will be unable to access the Internet. How do you know if your PC has the DNSChanger virus? Don’t worry. Google has explained the hack attack and tools to remove the malware on its official blog. Trend Micro also has extensive step-by-step instructions to check if your Windows PC or Mac is infected by the virus. The article is found at http://www.thinkdigit.com/Internet/Google-warns-users-about-DNSChanger-malware_9665.html How to check if my computer is one of those affected?

  Read the article

• How to stop Excel 2003 from loading a Gazillion files

  - by Gary M. Mugford

  One of my soon-to-be-ex-friends got an Excel file from another friend of his and decided to click on it. It started opening all kinds of files from within Excel. Over 200 and still counting when he called me. I told him to go to task manager, which showed a LOT of files in the applications tab, but only one Excel.exe in the processes tab. Closing it down there, closed down Excel. I then CrossLooped in to see if I could give him a helping hand. Each time Excel was re-opened, the mass influx of files started. They were all kinds of files, PDFs, Docs, JPGs, even some spreadsheets. It looked like the end of solitaire, with multiple windows opening (XP) and the counter on the lone Excel button on the task bar counting off the files. I did the task manager exit routine and went looking for temp files. I CrapCleaned out the system. Made sure I went through the files created in the last hour and deleted anything with a temp anywhere in it. I also deleted the crappy infected/corrupted file from it's place on the desktop (yeah, I know, I yelled for 15 minutes on THAT subject). Despite a delousing, the restart of Excel, which complained of a deactivated add-in, would start the cascading windows, whether I answered yes or no to that question. Yes, it knew it had a serious crash, but why would it just keep on trying to load the bad file, even when I got rid of it? But here's the real question. WHERE was it loading from? I went through the backup folder and NOTHING was there! So what's the process for starting Excel WITHOUT it trying to do a crash recovery? Sort of makes me feel stupid at times. Thanks for any light you can shed on this issue. GM

  Read the article

• Debian Squeeze and exim4: cannot send mail

  - by Fernando Campos

  Hello guys, Got this error after install and config of exim4-daemon-light and mailutils packages on Debian Squeeze. This package is aimed to send automatic messages from websites, like email confirmation and stuff. Configuration after package install: dpkg-reconfigure exim4-config You'll be presented with a welcome screen, followed by a screen asking what type mail delivery you'd like to support. Choose the option for "internet site" and select "Ok" to continue. After many configuration sceens you can test mail with: echo "test message" | mail -s "test message" [email protected] Here is the response: root@server:/etc# echo "test message" | mail -s "test message" [email protected] 2011-03-02 20:34:59 1PuxRT-0001Aj-T9 Cannot open main log file "/var/log/exim4/mainlog": Permission denied: euid=101 egid=103 2011-03-02 20:34:59 1PuxRT-0001Aj-T9 <= root@debian U=root P=local S=331 2011-03-02 20:34:59 1PuxRT-0001Aj-T9 Cannot open main log file "/var/log/exim4/mainlog": Permission denied: euid=101 egid=103 exim: could not open panic log - aborting: see message(s) above Can't send mail: sendmail process failed with error code 1 There is no /var/log/exim4 directory on my server. I tried to create it, but it didn't work. Please, can someone help me? Best regards, Fernando

  Read the article

• CoreStore Encryption Error on Mac Lion

  - by Michael

  I am trying to encrypt an external drive using diskutil CoreStorage on Mac Lion 10.7.4. I thought the only requirements were that the drive have GUID partition scheme and Journaled HFS+ file system. I think my drive is configured accordingly but when I type the following command I get an error message back: Michaels-MacBook-Pro:~ Michael$ diskutil cs convert disk2 -passphrase TestPassword Error converting disk to CoreStorage: The given file system is not supported on Core Storage (-69756) Here are the details reported for the drive in question: Michaels-MacBook-Pro:~ Michael$ diskutil list disk2 /dev/disk2 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *500.1 GB disk2 1: EFI 209.7 MB disk2s1 2: Apple_HFS Test1 499.8 GB disk2s2 Michaels-MacBook-Pro:~ Michael$ diskutil list disk2 /dev/disk2 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *500.1 GB disk2 1: EFI 209.7 MB disk2s1 2: Apple_HFS Test1 499.8 GB disk2s2 Michaels-MacBook-Pro:~ Michael$ diskutil info disk2s2 Device Identifier: disk2s2 Device Node: /dev/disk2s2 Part of Whole: disk2 Device / Media Name: Test1 Volume Name: Test1 Escaped with Unicode: Test1 Mounted: Yes Mount Point: /Volumes/Test1 Escaped with Unicode: /Volumes/Test1 File System Personality: Journaled HFS+ Type (Bundle): hfs Name (User Visible): Mac OS Extended (Journaled) Journal: Journal size 40960 KB at offset 0xe8e000 Owners: Disabled Partition Type: Apple_HFS OS Can Be Installed: Yes Media Type: Generic Protocol: FireWire SMART Status: Not Supported Volume UUID: 1024D0B8-1C45-3057-B040-AE5C3841DABF Total Size: 499.8 GB (499763888128 Bytes) (exactly 976101344 512-Byte-Blocks) Volume Free Space: 499.3 GB (499315826688 Bytes) (exactly 975226224 512-Byte-Blocks) Device Block Size: 512 Bytes Read-Only Media: No Read-Only Volume: No Ejectable: Yes Whole: No Internal: No I'm a little concerned that the "Partition Type: Apple_HFS" entry is causing the problem, but I don't know how to change that. I only seem to be able to control the "File System Personality: Journaled HFS+" in Disk Utility. Can anyone shed some light on this for me?

  Read the article

• kvm works only when kvm-intel is unloaded

  - by Sathya

  I am new to kvm. I have this strange issue. But before explaining the issue, here is my set up. I try to install VM on my Host which is a Acer Laptop 5720 Has T7500 Intel processor. The cpu flags indicate that Virtualization is supported. I run Ubuntu 10.04 (lucid) on it. It comes with kvm. Now coming to the issue - I dont get any errors while executing "sudo modprobe kvm-intel". So I presume my processor does indeed support hardware virtualization. I use virt-manager and create a VM on which I install ubuntu from an *.iso file. When I start the VM it says it is running. No signs of any trouble. I can see the domain list in "virsh list". But when I try to connect to the VM thru VNC, all I get to see is a blank screen (no cursor). There is no response to any key press. I changed the video mode etc. Tried all different combinations but none work. But strangely, if I shutdown the vm an virt-manager and then unload the module by doing "sudo modprove -r kvm-intel", everything works fine. ie., I can see the screen via VNC. I am able to install the OS and so on. So what does this mean ? IS hardware virtualization not supported ? How come there is no error anywhere ? dmesg | grep kvm doesnt report anything. Can someone throw light on what excatly is happening ?

  Read the article

• fail2ban Error Gentoo

  - by Mark Davidson

  Hi All I've recently setup a new VPS running Gentoo (My first time using the distro so please forgive me is this is a really easy one) and as I've done with other servers installed fail2ban. Setting it up to block the host via iptables, on too many unsuccessful logins with ssh. However I'm getting a strange error that I can't quite solve. When I start fail2ban I get these lines in the error log 2009-11-13 18:02:01,290 fail2ban.jail : INFO Jail 'ssh-iptables' started 2009-11-13 18:02:01,480 fail2ban.actions.action: ERROR iptables -N fail2ban-SSH iptables -A fail2ban-SSH -j RETURN iptables -I INPUT -p tcp --dport ssh -j fail2ban-SSH returned 100 If I try and force a ban these errors show up in the log and the host is not banned 2009-11-13 11:23:26,905 fail2ban.actions: WARNING [ssh-iptables] Ban XXX.XXX.XXX.XXX 2009-11-13 11:23:26,929 fail2ban.actions.action: ERROR iptables -n -L INPUT | grep -q fail2ban-SSH returned 100 2009-11-13 11:23:26,930 fail2ban.actions.action: ERROR Invariant check failed. Trying to restore a sane environment 2009-11-13 11:23:27,007 fail2ban.actions.action: ERROR iptables -N fail2ban-SSH iptables -A fail2ban-SSH -j RETURN iptables -I INPUT -p tcp --dport ssh -j fail2ban-SSH returned 100 2009-11-13 11:23:27,016 fail2ban.actions.action: ERROR iptables -n -L INPUT | grep -q fail2ban-SSH returned 100 2009-11-13 11:23:27,016 fail2ban.actions.action: CRITICAL Unable to restore environment My versions are as follows Linux masked 2.6.18-xen-r12 #2 SMP Wed Mar 4 11:45:03 GMT 2009 x86_64 Intel(R) Xeon(R) CPU E5504 @ 2.00GHz GenuineIntel GNU/Linux net-analyzer/fail2ban-0.8.4 net-firewall/iptables-1.4.3.2 If anyone could shead some light on these errors that would be great, I did wonder if it was a problem with iptables or some kernel modules but I can block an IP if I do. iptables -I INPUT -s 25.55.55.55 -j DROP so makes me think its something a bit more unusual. Thanks a lot in advance

  Read the article

• Accidently overwrote system.dbf - What now?

  - by Filip Ekberg

  I accidentally overwrote system.dbf in /usr/lib/oracle/xe/oradata/XE/system.dbf Well I did not actually do it accidentally, however I overwrote it because of other failures in the database. And when I try running the following: SQL> shutdown ORA-01109: database not open Database dismounted. ORACLE instance shut down. SQL> startup ORACLE instance started. Total System Global Area 289406976 bytes Fixed Size 1258488 bytes Variable Size 92277768 bytes Database Buffers 192937984 bytes Redo Buffers 2932736 bytes Database mounted. ORA-01589: must use RESETLOGS or NORESETLOGS option for database open Now I want to try to Recover the database because starting it in mounted or standard surely doesn't work. SQL> recover database using backup controlfile; ORA-00283: recovery session canceled due to errors ORA-01110: data file 1: '/usr/lib/oracle/xe/oradata/XE/system.dbf' ORA-01122: database file 1 failed verification check ORA-01110: data file 1: '/usr/lib/oracle/xe/oradata/XE/system.dbf' ORA-01206: file is not part of this database - wrong database id How do I solve this? Is it even possible? My "real" problem was that I ran the /etc/init.d/oracle-xe configure and it overwrote my old configuration and probably removed passwords and such so my tables were gone, however I found the mytablespace.dbf so I hope that it is possible to recover? Please shed some light on this.

  Read the article

• What is the best keyboard for typing speed (not layouts)

  - by Gapton

  So I am a programmer, and I like playing typing speed games. My typing speed is, for common English words, 85 to 90 wpm, max 95. I type on various devices, my laptop, desktop, office pc.... they all have slightly different keyboards. Being a curious programmer, I wonder what types of keyboard is used for the highest possible typing speed. Or let me phrase it in another way, what is the type of keyboards that people use in typing speed contest? Here is something I know that I feel like I can share: It must be a wired keyboard, I can feel the lag as I am typing this on my wireless keyboard, even if it is a slightly more expensive model which claims to have zero lag. I know people prefer a mechanical keyboard, for the hepatic feedback, however I have not tried one. It lasts longer and is noisy, it also does not have the problem of normal keyboards where you press many keys at a time the signals will get all jammed and the computer will only receive one or two keys. I personally prefer those "thin profile" keyboards. I type a lot, and 95 wpm put me in the top 5%, this is of course just on a gaming site. However when I type on the fat keyboards, my fingers have to travel a much longer distance before the keys actually click. This is where I find myself typing much faster with those thin profile keyboards found on my laptop. Because my fingers only hover on the keys and I only need to press a short distance, each stroke takes less force and light rapid strokes is what makes me type fast. When I type on a fat keyboard, I was forced to use heavy strokes, and this slows me down. There must be some people out there who are keyboard scientists, who actually do experiments and user tests with different setups. It would be interesting to understand more about the things we use everyday for not just work but a majority of our communications. P.S. this is about hardware and not about switching keyboard layouts to dvorak

  Read the article

• Port forwarding + shared connection with Ubuntu

  - by Joey Adams

  Because my wireless router's ethernet ports are defective, I set up a shared wireless connection from my laptop (which has wifi) to my eMac (which does not) via a crossover ethernet cable. The laptop is behind a router as 192.168.1.131, and the eMac is behind the laptop as 10.42.43.1 . The laptop is running Ubuntu 9.10 (Karmic). I achieved the shared connection through NetworkManager Applet. I right-clicked on the network icon at the topright, went to Edit Connections, selected the Wired connection named "Auto eth0", clicked "Edit...", went to the "IPv4 Settings" tab, and selected the Method "Shared to other computers". The eMac can now access the Internet. Now I want to enable port forwarding. There's a game I want to play that needs port 6112 forwarded (both TCP and UDP) in order to host games. I set up the router to enable port forwarding for 192.168.1.131 (the laptop), but port forwarding still isn't available on the eMac. I suppose I need to pretend my laptop is a router and configure port forwarding on it, indicating that incoming connections to the laptop (192.168.1.131) should be forwarded to the eMac on the shared connection (10.42.43.1 ). Thus, packets coming into the router on port 6112 would be redirected to the laptop (by the router), then to the eMac (by the laptop). My question is, how would I do that on Ubuntu (in light of NetworkManager's presence)? Also, if I can't get this to work, does anyone mind hosting a comp stomp? :D

  Read the article

• Inter-vlan routing issues

  - by DKNUCKLES

  I've been brought in to help administer a network and I've run into an issue - I'm not sure why this one is beyond me, however I figure an extra set of eyes on the problem may help resolve the issue. I have an HP MSM720 controller and at the time I'm trying to set up a basic hotspot set up with access points. For the time being I'm just looking to have people authenticate with a PSK and access the internet and other resources (namely printers) on other vlans. The user authenticates and the DHCP server on the controller gives them a 192.168.1.0/24 address. They are able to successfully browse the internet and ping machines on other networks, however they are unable to print to network printers that sit on the same LANs as the very computers that wireless clients can ping. The (extremely simplified) topology is as follows Computers on the wireless 192.168.1.1 network are able to ping computers on the 192.168.0.0 network, however cannot ping or print to the printers on the same network. I'm baffled and I have no idea why this is the case. Can anyone shed some light on this for me? Can someone spot the error of my configuration? EDIT : It should be noted that for whatever reason other computers on the 10.0.100.0/24 network cannot even ping the gateway of the Wireless Access network (192.168.1.1) - I'm not sure if this is relevant. These are the VLANS listed on the controller.

  Read the article

• Need a VM for running a PHP Sandbox

  - by Phani

  I am working on Web application honeypot. It collects PHP files it receives (as part of an RFI attack) and runs them in order to return the result back to the attacker. The aim is to coax the bad guy into going further into his attack. Based on the answers to my SO question, I am looking at using VMs for running the PHP Sandbox. The honeypot itself consists of Python code and will be running in a Linux environment (preferably Ubuntu-like). These are some of the requirements: The VM should be a light weight as possible. We are going to distribute the code around and many people are going to use the VM along with the Python based honeypot. So, the installation and configuration should not be too difficult. The guest system would also be Linux as we are going to distribute the VM image around. It should be possible for the Python code outside to talk to the guest system. It would be passing on the PHP file to the guest system and will get the output result from it. It should be possible to automate the initial configuration of the VM (such as allocation of RAM etc.) I would like to randomize these settings in order to make the sandbox less 'fingerprintable' I have looked at OpenVZ and KVM so far. Are there any other VMs that I might look at? What do you recommend?

  Read the article

• Cisco SG 300-28P PoE switch appears to have damaged my domain server's network IF

  - by cdonner

  I just replaced the old HP ProCurve switch with a new Cisco SG 300-28P managed switch. It has PoE on all ports. Everything works, except for my domain server that went offline and the network interface appears to be dead. Windows says the network cable is disconnected, and no lights blink on the switch. Tried different cables and different ports on the switch. The Cisco PoE ports are supposed to be auto-sensing, i.e. not to send power to a device that cannot handle it. Is this technique not 100% reliable? The server is a SHUTTLE XS35V2 with an onboard network chip, so it is probably fried. My questions: is this plausible? who's fault is it - Shuttle or Cisco (i.e. which support line should I try first)? UPDATE: I did go back and tried another switch between the server and the Cisco switch, and indeed, the connection came back to live. When everything is powered down and I start fresh, with the server connected to the Cisco switch, the port light will blink for a while and the connection status is "No Internet connection" at first until it goes off after about 20 seconds and the connection status changes to "Network cable disconnected". On the other switch it works. Clearly not a PoE issue now. I will start looking into the Cisco's onboard diagnostic functions, but so far I have not noticed anything unusual in the log.

  Read the article

• DIY NAS - links for Instructions

  - by Kaushik Gopal

  Good folk of SU, I'm planning to build a NAS (Network Access Storage). I'm planning to do it cheap (:read Old PC Config + Open source software). I was looking for good DIY links . Before you shoot this down as a Repost, I'm only looking for good links containing detailed instructions for setting up a NAS. I did a fair bit of searching and found these links (so please suggest others. While these links are great they delve more on the hardware side, i'm looking for more instructions in the software side). For the sake of the interwebs: Ubuntu: http://snarfquest.com/wiki/index.php/Setting_up_a_Home_NAS http://www.smallnetbuilder.com/content/view/27962/77/ http://jonpeck.blogspot.com/2006/11/how-to-configure-80-fileserver-in-45.html FreeNAS http://www.smallbusinesscomputing.com/webmaster/article.php/3719706 http://www.codeproject.com/KB/system/homemade_nas.aspxhttp://www.codeproject.com/KB/system/homemade_nas.aspx There was one at rubbervir.us that everyone points to, but apparently the site has gone down. A couple of other queries: Is Printer/Scanner sharing a possibility with NAS devices? Many talk of torrent support with NAS Devices, a little more light on this? Does this mean, an auto download of torrent through a feed into NAS, or just support for storing Torrent download files onto the NAS(don't see the difference between the latter and a normal file tranfer)

  Read the article

• Time drift in Cloud Server - need to mainpulate GRUB config

  - by Aditya Advani

  We are hosting a VPS on a popular host and are experiencing a regular time drift of several minutes a day forward (approx 7). Linux Kernel: 2.6.18-164.11.1.el5 GNU/Linux Distro: CentOS release 5.4 (Final) We reached out to our hosting provider and their support advised us " This is a known issue with Cloud Servers. To fix this you will need to add one line to your grub config located at: /boot/grub/menu.lst The line you need to add is: noapic nolapic divider=10 nolapic_timer This should correct this issue. You will need to restart after this is added in. " Because I am wary of manipulating grub, mostly I'm terrified that our server may fail to restart - I ask you guys, the pro *nix admins - where exactly in this file does the recommended insertion below: # line from 1&1 for time syncing issue (Case 5163) noapic nolapic divider=10 nolapic_timer go? Please specify where exactly, and whether the order of commands is or is not important. Why is the block below "title CentOS ..." indented? If someone could give me an overview of how this works or point me to a resource that's easy to follow, that's what I'm looking for immediately, a light overview or basic understanding of what I;m doing. If GRUB and bootloaders are a deep dark treasure trove of kernel hacking or something, that's great well-recommended in-depth resources are also very welcome. This is my current /boot/grub/menu.lst # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file #boot=/dev/sda # serial --unit=0 --speed=57600 terminal --timeout=5 serial console timeout=5 title CentOS (2.6.18-164.11.1.el5) root (hd0,0) kernel /boot/vmlinuz-2.6.18-164.11.1.el5 ro root=/dev/hda1 console=tty0 console=tty initrd /boot/initrd-2.6.18-164.11.1.el5.img MOST IMPORTANT: I need to know where in the file above it is appropriate to paste the suggested line so I can confidently restart my VPS after manipulating GRUB config

  Read the article

• MySQL is killing the server IO.

  - by OneOfOne

  I manage a fairly large/busy vBulletin forums (running on gigenet cloud), the database is ~ 10 GB (~9 milion posts, ~60 queries per second), lately MySQL have been grinding the disk like there's no tomorrow according to iotop and slowing the site. The last idea I can think of is using replication, but I'm not sure how much that would help and worried about database sync. I'm out of ideas, any tips on how to improve the situation would be highly appreciated. Specs : Debian Lenny 64bit ~12Ghz (6x2GHz) CPU, 7520gb RAM, 160gb disk. Kernel : 2.6.32-4-amd64 mysqld Ver 5.1.54-0.dotdeb.0 for debian-linux-gnu on x86_64 ((Debian)) Other software: vBulletin 3.8.4 memcached 1.2.2 PHP 5.3.5-0.dotdeb.0 (fpm-fcgi) (built: Jan 7 2011 00:07:27) lighttpd/1.4.28 (ssl) - a light and fast webserver PHP and vBulletin are configured to use memcached. MySQL Settings : [mysqld] key_buffer = 128M max_allowed_packet = 16M thread_cache_size = 8 myisam-recover = BACKUP max_connections = 1024 query_cache_limit = 2M query_cache_size = 128M expire_logs_days = 10 max_binlog_size = 100M key_buffer_size = 128M join_buffer_size = 8M tmp_table_size = 16M max_heap_table_size = 16M table_cache = 96 Other : From the cloud's IO chart, we're averaging 100mb/s read. > vmstat procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 9 0 73140 36336 8968 1859160 0 0 42 15 3 2 6 1 89 5 > /etc/init.d/mysql status Threads: 49 Questions: 252139 Slow queries: 164 Opens: 53573 Flush tables: 1 Open tables: 337 Queries per second avg: 61.302. moved from superuser

  Read the article

• Create new folder for new sender name and move message into new folder

  - by Dave Jarvis

  Background I'd like to have Outlook 2010 automatically move e-mails into folders designated by the person's name. For example: Click Rules Click Manage Rules & Alerts Click New Rule Select "Move messages from someone to a folder" Click Next The following dialog is shown: Problem The next part usually looks as follows: Click people or public group Select the desired person Click specified Select the desired folder Question How would you automate those problematic manual tasks? Here's the logic for the new rule I'd like to create: Receive a new message. Extract the name of the sender. If it does not exist, create a new folder under Inbox Move the new message into the folder assigned to that person's name I think this will require a VBA macro. Related Links http://www.experts-exchange.com/Software/Office_Productivity/Groupware/Outlook/A_420-Extending-Outlook-Rules-via-Scripting.html http://msdn.microsoft.com/en-us/library/office/ee814735.aspx http://msdn.microsoft.com/en-us/library/office/ee814736.aspx http://stackoverflow.com/questions/11263483/how-do-i-trigger-a-macro-to-run-after-a-new-mail-is-received-in-outlook http://en.kioskea.net/faq/6174-outlook-a-macro-to-create-folders http://blogs.iis.net/robert_mcmurray/archive/2010/02/25/outlook-macros-part-1-moving-emails-into-personal-folders.aspx Update #1 The code might resemble something like: Public WithEvents myOlApp As Outlook.Application Sub Initialize_handler() Set myOlApp = CreateObject("Outlook.Application") End Sub Private Sub myOlApp_NewMail() Dim myInbox As Outlook.MAPIFolder Dim myItem As Outlook.MailItem Set myInbox = myOlApp.GetNamespace("MAPI").GetDefaultFolder(olFolderInbox) Set mySenderName = myItem.SenderName On Error GoTo ErrorHandler Set myDestinationFolder = myInbox.Folders.Add(mySenderName, olFolderInbox) Set myItems = myInbox.Items Set myItem = myItems.Find("[SenderName] = " & mySenderName) myItem.Move myDestinationFolder ErrorHandler: Resume Next End Sub Update #2 Split the code as follows: Sent a test message and nothing happened. The instructions for actually triggering a message when a new message arrives are a little light on details (for example, no mention is made regarding ThisOutlookSession and how to use it). Thank you.

  Read the article

• netlogon errors

  - by rorr

  I have two instances of mssql 2005 and am using CA XOSoft replication. The master is a failover cluster and the replica is a standalone server. They are all running Server 2003 sp2 x64. Same patch levels on all servers. This setup has worked great for several months until we recently restricted the RPC ports on both nodes of the master(5000 - 6000 using rpccfg.exe). We have to implement egress filtering, thus the limiting of the ports. We began receiving login errors for sql windows authentication and NETLOGON Event ID: 5719: This computer was not able to set up a secure session with a domain controller in domain due to the following: Not enough storage is available to process this command. This may lead to authentication problems. Make sure that this computer is connected to the network. If the problem persists, please contact your domain administrator. We also see group policies failing to update and cluster file shares go offline at the same time. The RPC ports were set back to default when we started seeing these problems and the servers rebooted, but the problems persist. The domain controllers are not showing any errors. Running dcdiag and netdiag shows everything is fine. We have noticed that the XOSoft service ws_rep.exe is using a lot of handles(8 - 9k), about the same number that sqlserver is using. As soon as xosoft replication is stopped the login errors cease and everything functions correctly. I have opened a ticket with CA for XOSoft, but I'm not sure that the problem is actually xosoft, but that it is the one bringing the problem to light. I'm looking for tips on debugging RPC problems. Specifically on limiting the ports and then reverting the changes.

  Read the article

• VMware vSphere Hypervisor 5 with Intel SPL 5000 in Raid 0 no boot from DVD?

  - by Richard

  I hope this is the correct StackExchange, since I am only using StackOverflow for Web development, but need some help with my server configuration. I would like to install VMware vSphere Hypervisor 5 on my server here at home and run a view machines on it such as Windows Server 2008 and Red Hat. I used to have either OpenSuse or Windows Server 2008 installed but I would like to get into VMWare Hypervisor. My hardware configuration: - Intel S5000PSL with bios version S5000.86B.10.60.0091 build date 10/09/2008 as of read out of bios - E5420 @ 2.5GHz Intel Xeon CPU The Intel Virtualization Technology is enabled in the BIOS - DVD DH20A4P DVD Writer - 8GB ECC Ram I have configured a RAID 0 on my 2 WD 2TB SATA drives I have burned the Hypervisor 5 on an empty DVD and it is bootable, I tested it on my client PC. The main problem here is basically, that I cannot boot the DVD on my server. I have set the Boot Option to the DVD drive. I have booted from the BIOS straight in the DVD drive and it does not work. I do not see any error messages. The only thing I see are the PXE error messages when it tries booting from the network and other devices, obviously without any result. Does anybody know why I cannot boot the DVD? What could cause the problem? I have sucessfully installed Windows Server 2008 via original DVD about 1 year ago, so the DVD drive can read and does work. The DVD drive is available in the BIOS and I have checked all cables and none of them is loose in any way. I even see the light flashing but it does not want to boot from the DVD. I am looking forward to suggestions and things that I should check. Thank you very much

  Read the article

• Print jobs sent to server OK, but then get deleted

  - by Paul Morrison

  I have 2 HP computers, one running Win XP SP3, one running Win7. I have a Lexmark X4270 All-in-One printer attached to the Win7 machine via a USB port. I can print OK from the Win 7 machine, but when I print from the WinXP machine, the print job shows up in both print queues (showing the same number of bytes - which is good!), but then the status gets changed to "Deleting - Sent to printer", and that status shows up in both print queues. The print job then stays there until I do a cancel, followed by a system restart. FWIW the owner is shown as Guest, but I have permission for Everyone set to print... I believe I have up-to-date drivers; I don't believe it's a firewall problem. What I would like to see is the Win7 machine's reason for deleting my print jobs - is there a diagnostic tool available? Also, I notice that the port for this printer on the WinXP machine is set to USB001 - I would have thought something like \servername\sharedprinter would be more appropriate - and I can see that in the list of ports, but the system doesn't let me change the port name from USB001... Could someone shed some light? I have spent hours on this! TIA BTW I can do file sharing, no problem!

  Read the article

• Dual Xeon Server voltages are low

  - by Mindflux

  I've got a whitebox server running CentOS 5.7. It's a Dual Xeon 5620, 24GB of RAM. The mainboard is a SuperMicro X8DT6-F and the chassis is a SC825TQ-R720LPB. Dual 720W Power supplies. We had a big power outage a couple weeks back that took down everything, I don't have any pre-power outage figures for this server, and the only reason I noticed these is because when I was bringing up the servers I was checking them out with more scrutiny than usual. http://i.imgur.com/rSjiw.png (Image of voltage readings) As you can see, CPU1 DIMM is low, +3.3V is high, 3.3VSB is high, +5v is high, +12v is REAL LOW (out of normal 5% (plus/minus))... and VBAT is off the charts. With my whitebox VAR we've tried the following: Swap out PSU with another server I have with the same PSUs. Try different power cord Update BMC/IPMI firmware in case readings were wrong (They aren't) Update BIOS Try different PDU Try a different outlet and/or circuit Replaced Voltage Regulator Unit At this point, the only thing we haven't done, seemingly is replace the mainboard.. which is what the next step will be unless something else shines some light on the situation. I should mention the system is rock solid otherwise which is a surprise given the 12v voltage is that far off.

  Read the article

• Trying to configure DNS on a Godaddy Virtual Dedicated host, Mediatemple Domain Registration [closed]

  - by dclowd9901

  A client of mine purchased VD hosting with Godaddy and a domain name with Mediatemple. I've never configured DNS from scratch, and I'm finding it very difficult to find any sort of explanation on how to go about it. As of right now, Mediatemple is pointing to the Godaddy's ns1.domaincontrol.com and ns2.domaincontrol.com nameservers. The VD hosting on Godaddy (via their Simple Control Panel) has options to "Add a new domain", which brings you through a wizard of sorts that asks you if the domain has already been registered (yes), what it is (dclowd9901.com for this example), create a system username and password for it (with checkboxes for SSH and FTP access), which level of user can administer it, and whether a mail account should be setup. When complete, it also creates a zone file. In this zone file, the Primary nameserver is ns1.dclowd9901.com; the records are as follow (where 12.23.12.34 is the presumed host): @ A 12.23.12.34 @ NS ns1 @ NS ns2 ns1 A 12.23.12.34 ns2 A 12.23.12.34 @ MX mail www A 12.23.12.34 ftp A 12.23.12.34 ssh A 12.23.12.34 mail A 12.23.12.34 If anyone can shed any light on this for me, explain to me the interactions between the registrar and the host and so on, I'd be very grateful. Thanks in advance for the help.

  Read the article

• Toshiba Qosmio: Battery Stuck at 60%, does not Charges, PC can't power up, can't remain on with out

  - by Fellknight

  Just like the tittle says, now let me try to give some more detail about the symptoms; The battery is stuck at 60 percent (68% at the moment of this writing).When hovering over the battery icon in Windows 7 Home Premium x64 it reads:"68% available (plugged in, charging)", there's no x or any sing the OS is displaying any error. No matter how much time left connected to the AC adapter the battery doesn't charge, it seems however it continues to discharge at its normal rate when disconnected from the laptop (about 1% each 2 weeks). Now this last symptom is the one i find most strange it "seems" the laptop somehow isn't recognizing the battery because even with the remaining charge of 60%(ish) the laptop wont power up or remain on if disconnected from its AC adapter(if it's on and is unplugged it will immediately turn off). Meaning that even with the battery attached correctly in its right place is as if running the laptop with no battery at all. Toshiba's Utilities haven't detected anything strange (or anything for that matter) with the battery or the hardware. The laptop when in use is connected 90% of the time to a Belkin surge protector (like my 1TB EHD). The protector is working correctly (green light on) and the 1TB HD too, thus a power surge having damaged it's very unlikely. Thnx in advance

  Read the article

• Cannot access SMC8014WG-SI provided by TimeWarner/RoadRunner administrative interface...

  - by Matt Rogish

  I just received installation of RoadRunner internet/TV/Voice and I was given a wi-fi router from the TimeWarner folks. The model is a SMC SMC8014WG-SI. Unfortunately, the password it uses is WEP and that is, as we all know, completely insecure. The tech that was here didn't know how to change it to something like WPA2 w/TKIP, and I was on hold for 20 minutes with the TimeWarner folks before I gave up. My problem is that the default web interface (http://192.168.0.1) isn't responding. I can ping it, I can access the internet through it, but I can't get to the admin interface. I did a "hard reset" of the device but still no dice. My suspicion is that the wi-fi admin interface is disabled (a common setting) but the wired interface isn't working on either of my two laptops (I've tried two laptops with two different cables, no link light activated). Am I SOL? Did they lock this down so I can't do what I want to do? Worst-case is I just hook up my go-to WRT54G router to the other modem and leave this one turned off, but I'd rather use their hardware to avoid any "It's not our problem" in the future. Any thoughts? Thanks!!

  Read the article

< Previous Page | 98 99 100 101 102 103 104 105 106 107 108 109  | Next Page >