Search Results

Search found 2589 results on 104 pages for 'dell powerconnect'.

Page 102/104 | < Previous Page | 98 99 100 101 102 103 104  | Next Page >

  • Surface and the Uphill Battle to Win Over iPad Users (Namely: Me)

    - by D'Arcy Lussier
    I went away this past weekend and decided to bring along the Windows 8 tablet from the Build conference last year – y’know, to give Windows 8 a try in a typical scenario. I also brought our iPad 2 along since I figured my wife would want to use that. I’d love to tell you how I found using my Windows 8 tablet but I can’t – I used the iPad exclusively the entire weekend. It was during this that I realized what Microsoft needs to do to win me over as an iPad user. As you’ll see, I’m left wondering what it is that Surface is meant to compete with: iPad and other tablets, or thin laptops like the MacBook Air or Ultrabooks. Device Size I really like the size of the iPad compared with the Build tablet. It’s not as long and the thinness/weight of the device makes it feel more like you’re holding a magazine than a computer. I’m pleased that Microsoft will be matching the thinness of the iPad with Surface, but I’m suspect as to what that actually means. The iPad’s edges slant inwards where the Surface has a thicker boxish look (similar to the iPhone 4S). So while they may have the same depth at the deepest part of both devices, I bet the iPad will come off feeling thinner. However, its not lost on me the number of external port options the Surface’s design provides over the iPad (Usb, etc.). With that said, I haven’t missed having a USB slot on my iPad. I’m not a fan of lengthening the Surface screen size to almost a full inch over the iPad, mainly because… Vertical Orientation Experience Did you notice at the announce event, in the images of the devices that have been released, and in any marketing for it, that the surface is always displayed in horizontal orientation. This is a huge beef I have with my Build tablet and why I prefer the iPad. Yes the iPad can do the wide-screenish mode, but the iPad is oriented to be vertical by nature. Don’t agree? Look at the button and camera placement – both on the shorter sides of the device. Compare that with the Surface, where the orientation for the button and camera is on the longer sides. To be fair, Blackberry and the horde of Android tablets out there haven’t gotten this either – since most monitors are widescreen nowadays tablets should be too right? Wrong. Widescreen is great for certain things, but tasks such as reading is not one of them – hence why monitor companies like Dell provide stands that allow you to flip your widescreen monitor to a vertical orientation. That Microsoft has chosen a horizontal orientation by default for Windows 8 is disappointing – hopefully hardware manufacturers will be given the option of a default vertical orientation. Fast Startup Time I like that I can turn off/turn on the iPad very quickly. Even from a true “off” mode and not just sleeping, the iPad boots up very quickly. Windows RT needs to have that same quick response. If I start finding that I’m waiting for the device to boot up for more than 30 seconds that could be a show stopper. No Heat I really hate that the Build tablet has fans that kick in to cool the procs, but its basically a slate computer and I get its part of that prototype build. For Surface, it needs to be the same type of experience as the iPad – no heat! I know Surface doesn’t have fans and uses some cool new vent system or something like that, but even then – I want to sit and read a book on my Surface without having to feel any heat coming from the device, which is the experience I have with the iPad now. What About Apps?! I am definitely not the target client when it comes to app stores. On my iPad I use: Safari Kindle Reader Twitter App Settlers of Catan TSN’s App And that’s it. So really, while its nice that some version of Office might be available, I’m not planning on utilizing a Surface for creating a PowerPoint or working on a Word document – that’s what my laptop is for. I want my tablet to be for information snacking or as an e-reader and occasionally an entertainment device. Surface vs iPad or Surface vs Air? The more that I read up on Surface, the more I wonder if it won’t be a touch-enabled MacBook Air competitor more than an iPad one. Also, I really question if Microsoft gets tablets – when one of your main selling features is a built-in physical keyboard it speaks more to a traditional laptop experience than a tablet one that’s entirely reliant on touch. Still, I really love the Windows Phone interface – way more than iOS – so I’m still very optimistic that the Metro experience on the tablet will be fantastic. I just worry that Microsoft has interpreted a tablet as a computer with a removable keyboard and a touch screen, and that’s not what tablet computing is about at all.

    Read the article

  • Build 2012, some thoughts..

    - by Dennis Vroegop
    I think you probably read my rant about the logistics at Build 2012, as posted here, so I am not going into that anymore. Instead, let’s look at the content. (BTW If you did read that post and want some more info then read Nia Angelina’s post about Build. I have nothing to add to that.) As usual, there were good speakers and some speakers who could benefit from some speaker training. I find it hard to understand why Microsoft allows certain people on stage, people who speak English with such strong accents it’s hard for people, especially from abroad, to understand. Some basic training might be useful for some of them. However, it is nice to see that most speakers are project managers, program managers or even devs on the teams that build the stuff they talk about: there was a lot of knowledge on stage! And that means when you ask questions you get very relevant information. I realize I am not the average audience member here, I am regular speaker myself so I tend to look for other things when I am in a room than most audience members so my opinion might differ from others. All in all the knowledge of the speakers was above average but the presentation skills were most of the times below what I would describe as adequate. But let us look at the contents. Since the official name of the conference is Build Windows 2012 it is not surprising most of the talks were focused on building Windows 8 apps. Next to that, there was a lot of focus on Azure and of course Windows Phone 8 that launched the day before Build started. Most sessions dealt with C# and JavaScript although I did see a tendency to use C++ more. Touch. Well, that was the focus on a lot of sessions, that goes without saying. Microsoft is really betting on Touch these days and being a Touch oriented developer I can only applaud this. The term NUI is getting a bit outdated but the principles behind it certainly aren’t. The sessions did cover quite a lot on how to make your applications easy to use and easy to understand. However, not all is touch nowadays; still the majority of people use keyboard and mouse to interact with their machines (or, as I do, use keyboard, mouse AND touch at the same time). Microsoft understands this and has spend some serious thoughts on this as well. It was all about making your apps run everywhere on all sorts of devices and in all sorts of scenarios. I have seen a couple of sessions focusing on the portable class library and on sharing code between Windows 8 and Windows Phone 8. You get the feeling Microsoft is enabling us devs to write software that will be ubiquitous. They want your stuff to be all over the place and they do anything they can to help. To achieve that goal they provide us with brilliant SDK’s, great tooling, a very, very good backend in the form of Windows Azure (I was particularly impressed by the Mobility part of Azure) and some fantastic hardware. And speaking of hardware: the partners such as Acer, Lenovo and Dell are making hardware that puts Apple to a shame nowadays. To illustrate: in Bellevue (very close to Redmond where Microsoft HQ is) they have the Microsoft Store located very close to the Apple Store, so it’s easy to compare devices. And I have to say: the Microsoft offerings are much, much more appealing that what the Cupertino guys have to offer. That was very visible by the number of people visiting the stores: even on the day that Apple launched the iPad Mini there were more people in the Microsoft store than in the Apple store. So, the future looks like it’s going to be fun. Great hardware (did I mention the Nokia Lumia 920? No? It’s brilliant), great software (Windows 8 is in a league of its own), the best dev tools (Visual Studio 2012 is still the champion here) and a fantastic backend (Azure.. need I say more?). It’s up to us devs to fill up the stores with applications that matches this. To summarize: it is great to be a Windows developer. PS. Did I mention Surface RT? Man….. People were drooling all over it wherever I went. It is fantastic :-) Technorati Tags: Build,Windows 8,Windows Phone,Lumia,Surface,Microsoft

    Read the article

  • Unable to keep the connecting using a wireless bridge

    - by dan
    I am running Ubuntu 12.04 on a dell inspiron desktop (core 2 duo) and am using wicd to manage my network/wifi. I've found that the WiFi card in the machine has trouble staying connected to my router (I believe this is a function of distance between the two), so I've taken an old Belkin F5d7231 wireless router and installed dd-wrt on it to use as a wireless bridge hoping that it will have better reception. I think everything up through the wireless bridge is working OK since I have no problems accessing the internet through it with my MacBook. The problem arises when I try to hook the ubuntu machine up to the wireless bridge. It will connect for a few minutes, but it will quickly disconnect without clear triggering event; it may be more likely to disconnect if there is a heavy traffic load going over it (could be something as simple as "cat big_text_file" in an ssh session). I've tried switching from dhclient to dhcpcd without much improvement. Here is the output from the syslog when it connects: Jun 30 17:10:08 Chicabuntu dhcpcd[28278]: wlan1: dhcpcd not running Jun 30 17:10:08 Chicabuntu dhcpcd[28278]: wlan1: exiting Jun 30 17:10:08 Chicabuntu dhcpcd[28312]: eth0: dhcpcd not running Jun 30 17:10:08 Chicabuntu dhcpcd[28312]: eth0: exiting Jun 30 17:10:08 Chicabuntu avahi-daemon[1041]: Interface eth0.IPv6 no longer relevant for mDNS. Jun 30 17:10:08 Chicabuntu avahi-daemon[1041]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::21c:c4ff:fe31:1a83. Jun 30 17:10:08 Chicabuntu avahi-daemon[1041]: Withdrawing address record for fe80::21c:c4ff:fe31:1a83 on eth0. Jun 30 17:10:08 Chicabuntu kernel: [15184.976127] tg3 0000:3f:00.0: irq 44 for MSI/MSI-X Jun 30 17:10:08 Chicabuntu kernel: [15185.010805] ADDRCONF(NETDEV_UP): eth0: link is not ready Jun 30 17:10:08 Chicabuntu dhcpcd[28347]: eth0: dhcpcd not running Jun 30 17:10:08 Chicabuntu dhcpcd[28347]: eth0: exiting Jun 30 17:10:08 Chicabuntu kernel: [15185.180156] tg3 0000:3f:00.0: irq 44 for MSI/MSI-X Jun 30 17:10:08 Chicabuntu kernel: [15185.212785] ADDRCONF(NETDEV_UP): eth0: link is not ready Jun 30 17:10:10 Chicabuntu kernel: [15187.027445] tg3 0000:3f:00.0: eth0: Link is up at 100 Mbps, full duplex Jun 30 17:10:10 Chicabuntu kernel: [15187.027452] tg3 0000:3f:00.0: eth0: Flow control is on for TX and on for RX Jun 30 17:10:10 Chicabuntu kernel: [15187.028300] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Jun 30 17:10:10 Chicabuntu dhcpcd[28353]: eth0: dhcpcd 3.2.3 starting Jun 30 17:10:10 Chicabuntu dhcpcd[28353]: eth0: hardware address = 00:1c:c4:31:1a:83 Jun 30 17:10:10 Chicabuntu dhcpcd[28353]: eth0: DUID = 00:01:00:01:17:81:85:79:00:1c:c4:31:1a:83 Jun 30 17:10:10 Chicabuntu dhcpcd[28353]: eth0: broadcasting for a lease Jun 30 17:10:11 Chicabuntu avahi-daemon[1041]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::21c:c4ff:fe31:1a83. Jun 30 17:10:11 Chicabuntu avahi-daemon[1041]: New relevant interface eth0.IPv6 for mDNS. Jun 30 17:10:11 Chicabuntu avahi-daemon[1041]: Registering new address record for fe80::21c:c4ff:fe31:1a83 on eth0.*. Jun 30 17:10:20 Chicabuntu kernel: [15197.568016] eth0: no IPv6 routers present Jun 30 17:10:29 Chicabuntu dhcpcd[28353]: eth0: offered 192.168.1.111 from 192.168.1.254 Jun 30 17:10:29 Chicabuntu dhcpcd[28353]: eth0: checking 192.168.1.111 is available on attached networks Jun 30 17:10:30 Chicabuntu dhcpcd[28353]: eth0: leased 192.168.1.111 for 86400 seconds Jun 30 17:10:30 Chicabuntu dhcpcd[28353]: eth0: adding IP address 192.168.1.111/24 Jun 30 17:10:30 Chicabuntu avahi-daemon[1041]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.1.111. Jun 30 17:10:30 Chicabuntu dhcpcd[28353]: eth0: adding default route via 192.168.1.254 metric 0 Jun 30 17:10:30 Chicabuntu dhcpcd[28353]: eth0: exiting Jun 30 17:10:30 Chicabuntu avahi-daemon[1041]: New relevant interface eth0.IPv4 for mDNS. Jun 30 17:10:30 Chicabuntu avahi-daemon[1041]: Registering new address record for 192.168.1.111 on eth0.IPv4. Jun 30 17:10:30 Chicabuntu dhcpcd.sh: interface eth0 has been configured with new IP=192.168.1.111 Jun 30 17:10:39 Chicabuntu ntpdate[28439]: adjust time server 91.189.94.4 offset 0.001915 sec And here is the syslog from when it shuts down the connection without reason: Jun 30 17:12:15 Chicabuntu kernel: [15312.575455] tg3 0000:3f:00.0: eth0: Link is down Jun 30 17:12:16 Chicabuntu dhcpcd[28603]: eth0: sending signal 1 to pid 28361 Jun 30 17:12:16 Chicabuntu dhcpcd[28361]: eth0: received SIGHUP, releasing lease Jun 30 17:12:16 Chicabuntu dhcpcd[28603]: eth0: exiting Jun 30 17:12:16 Chicabuntu avahi-daemon[1041]: Withdrawing address record for 192.168.1.111 on eth0. Jun 30 17:12:16 Chicabuntu avahi-daemon[1041]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.1.111. Jun 30 17:12:16 Chicabuntu avahi-daemon[1041]: Interface eth0.IPv4 no longer relevant for mDNS. Jun 30 17:12:16 Chicabuntu dhcpcd[28361]: eth0: removing default route via 192.168.1.254 metric 0 Jun 30 17:12:16 Chicabuntu avahi-daemon[1041]: Interface eth0.IPv6 no longer relevant for mDNS. Jun 30 17:12:16 Chicabuntu avahi-daemon[1041]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::21c:c4ff:fe31:1a83. Jun 30 17:12:16 Chicabuntu avahi-daemon[1041]: Withdrawing address record for fe80::21c:c4ff:fe31:1a83 on eth0. Jun 30 17:12:16 Chicabuntu dhcpcd[28361]: eth0: netlink: No such process Jun 30 17:12:16 Chicabuntu dhcpcd[28361]: eth0: removing IP address 192.168.1.111/24 Jun 30 17:12:16 Chicabuntu dhcpcd[28361]: eth0: netlink: Cannot assign requested address Jun 30 17:12:16 Chicabuntu dhcpcd[28361]: eth0: exiting Jun 30 17:12:16 Chicabuntu dhcpcd.sh: interface eth0 has been brought down Jun 30 17:12:17 Chicabuntu kernel: [15313.612141] tg3 0000:3f:00.0: irq 44 for MSI/MSI-X Jun 30 17:12:17 Chicabuntu kernel: [15313.644703] ADDRCONF(NETDEV_UP): eth0: link is not ready Jun 30 17:12:17 Chicabuntu dhcpcd[28674]: wlan1: dhcpcd not running Jun 30 17:12:17 Chicabuntu dhcpcd[28674]: wlan1: exiting Jun 30 17:12:17 Chicabuntu dhcpcd[28708]: eth0: dhcpcd not running Jun 30 17:12:17 Chicabuntu dhcpcd[28708]: eth0: exiting Jun 30 17:12:17 Chicabuntu kernel: [15313.912147] tg3 0000:3f:00.0: irq 44 for MSI/MSI-X Jun 30 17:12:17 Chicabuntu kernel: [15313.944746] ADDRCONF(NETDEV_UP): eth0: link is not ready Jun 30 17:12:18 Chicabuntu kernel: [15315.592569] tg3 0000:3f:00.0: eth0: Link is up at 100 Mbps, full duplex Jun 30 17:12:18 Chicabuntu kernel: [15315.592576] tg3 0000:3f:00.0: eth0: Flow control is on for TX and on for RX Jun 30 17:12:18 Chicabuntu kernel: [15315.593399] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Jun 30 17:12:20 Chicabuntu avahi-daemon[1041]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::21c:c4ff:fe31:1a83. Jun 30 17:12:20 Chicabuntu avahi-daemon[1041]: New relevant interface eth0.IPv6 for mDNS. Jun 30 17:12:20 Chicabuntu avahi-daemon[1041]: Registering new address record for fe80::21c:c4ff:fe31:1a83 on eth0.*. Jun 30 17:12:29 Chicabuntu kernel: [15325.680019] eth0: no IPv6 routers present If this isn't useful, I can also post the wicd log, but that is kind of long. If anyone could help me I would be eternally grateful.

    Read the article

  • Synergy - easy share of keyboard and mouse between multiple computers

    Did you ever have the urge to share one set of keyboard and mouse between multiple machines? If so, please read on... Using multiple machines Honestly, as a software craftsman it is my daily business to run multiple machines - either physical or virtual - to be able to solve my customers' requirements. Recent hardware equipment allows this very easily. For laptops it's a no-brainer to attach a second or even a third screen in order to extend your native display. This works quite handy and in my case I used to attached two additional screens - one via HD15 connector, the other via HDMI. But... as it's a laptop and therefore a mobile unit there are slight restrictions. Detaching and re-attaching all cables when changing locations is one of them but hardware limitations, too. After all, it's a laptop and not a workstation. I guess, that anyone working in IT (or ICT) has more than one machine at their workplace or their home office and at least I find it quite annoying to have multiple sets of keyboard and mouse conquering my remaining space on my desk. Despite the ugly looks of all those cables and whatsoever 'chaos of distraction' I prefer a more clean solution and working environment. This allows me to actually focus on my work and tasks to do rather than to worry about choosing the right combination of keyboard/mouse. My current workplace is a patch work of various pieces of hardware (approx. 2-3 years): DIY desktop on Ubuntu 12.04 64-bit, Core2 Duo (E7400, 2.8GHz), 4GB RAM, 2x 250GB HDD, nVidia GPU 512MB Dell Inspiron 1525 on Windows 8 64-bit, 4GB RAM, 200GB HDD HP Compaq 6720s on Windows Vista 32-bit, Core2 Duo (T5670, 1.8GHz), 2GB RAM, 160GB HDD Mac mini on Mac OS X 10.7, Core i5 (2.3 GHz), 2GB RAM, 500GB HDD I know... Not the latest and greatest but a decent combination to work with. New system(s) is/are already on the shopping list but I live in the 'wrong' country to buy computer hardware. So, the next trip abroad will provide me with some new stuff. Using multiple operating systems The list of hardware above already names different operating systems, and actually I have only one preference: Linux. But still my job as a software craftsman for Visual FoxPro and .NET development requires other OSes, too. Not a big deal, it's just like this. Additionally to those physical machines, there are a bunch of virtual machines around. Most of them running either Windows XP or Windows 7. Since years I have the practice that each development for one customer is isolated into its own virtual machine and environment. This keeps it clean and version-safe. But as you can easily imagine with that setup there are a couple of constraints referring to keyboard and mouse. Usually, those systems require their own pieces of hardware attached. As stated, I don't like clutter on my desk's surface, so a cross-platform solution has to come in here. In the past, I tried it with various applications, hardware or network protocols like X11, RDP, NX, TeamViewer, RAdmin, KVM switch, etc. but the problem in this case is that they either allow you to remotely connect to the other system or exclusively 'bind' your peripherals to the active system. Not optimal after all. Synergy to the rescue Quote from their website: "Synergy lets you easily share your mouse and keyboard between multiple computers on your desk, and it's Free and Open Source. Just move your mouse off the edge of one computer's screen on to another. You can even share all of your clipboards. All you need is a network connection. Synergy is cross-platform (works on Windows, Mac OS X and Linux)." Yep, that's it! All I need for my setup here... Actually, I couldn't believe it myself that I didn't stumble over synergy earlier but 'Get over it' and there we go. And despite the fact that it is Open Source, no, it's also for free. Donations for the developers are very welcome and recently they introduced Synergy Premium. A possibility to buy so-called premium votes that can be used to put more weight / importance on specific issues or bugs that you would like the developers to look into. Installation and configuration Simply download the installation packages for your systems of choice, run the installer and enter some minor information about your network setup. I chose my desktop machine for the role of the Synergy server and configured my screen setup as follows: The screen setup allows you currently to build or connect up to 15 machines. The number of screens can be higher as those machine might have multiple screens physically attached. Synergy takes this into the overall calculations and simply works as expected. I tried it for fun with a second monitor each connected to both laptops to have a total number of 6 active screens. No flaws after all - stunning! All the other machines are configured as clients like so: Side note: The screenshot was taken on Windows 8 and pasted via clipboard into Gimp running on Ubuntu. Resume Synergy is now definitely in my box of tools for my daily work, and amongst the first pieces of software I install after the operating system. It just simplifies my life and cleans my desk. Never again without Synergy!Now, only waiting for an Android version to integrate my Galaxy Tab 10.1, too. ;-) Please, check out that superb product and enjoy sharing one keyboard, one mouse and one clipboard between your various machines and operating systems.

    Read the article

  • Is it too early to start designing for Task Parallel Library?

    - by Joe Erickson
    I have been following the development of the .NET Task Parallel Library (TPL) with great interest since Microsoft first announced it. There is no doubt in my mind that we will eventually take advantage of TPL. What I am questioning is whether it makes sense to start taking advantage of TPL when Visual Studio 2010 and .NET 4.0 are released, or whether it makes sense to wait a while longer. Why Start Now? The .NET 4.0 Task Parallel Library appears to be well designed and some relatively simple tests demonstrate that it works well on today's multi-core CPUs. I have been very interested in the potential advantages of using multiple lightweight threads to speed up our software since buying my first quad processor Dell Poweredge 6400 about seven years ago. Experiments at that time indicated that it was not worth the effort, which I attributed largely to the overhead of moving data between each CPU's cache (there was no shared cache back then) and RAM. Competitive advantage - some of our customers can never get enough performance and there is no doubt that we can build a faster product using TPL today. It sounds fun. Yes, I realize that some developers would rather poke themselves in the eye with a sharp stick, but we really enjoy maximizing performance. Why Wait? Are today's Intel Nehalem CPUs representative of where we are going as multi-core support matures? You can purchase a Nehalem CPU with 4 cores which share a single level 3 cache today, and most likely a 6 core CPU sharing a single level 3 cache by the time Visual Studio 2010 / .NET 4.0 are released. Obviously, the number of cores will go up over time, but what about the architecture? As the number of cores goes up, will they still share a cache? One issue with Nehalem is the fact that, even though there is a very fast interconnect between the cores, they have non-uniform memory access (NUMA) which can lead to lower performance and less predictable results. Will future multi-core architectures be able to do away with NUMA? Similarly, will the .NET Task Parallel Library change as it matures, requiring modifications to code to fully take advantage of it? Limitations Our core engine is 100% C# and has to run without full trust, so we are limited to using .NET APIs.

    Read the article

  • NVIDIA graphics driver in Ubuntu 12.04

    - by user924501
    So my overall goal is that I want to be able to code with CUDA enabled applications. However, upon many days of searching, using installation walkthroughs, and reinstalling countless times after driver failure... I'm now here as a last resort. I cannot get Ubuntu 12.04 LTS to install the NVIDIA 295.59 driver for my GeForce GT 540M NVIDIA graphics card. My main system specs is as follows... (I believe having the Intel processor may be the problem) DELL Laptop XPS L502X Intel® Core™ i7-2620M CPU @ 2.70GHz × 4 Intel Integrated Graphics 64 bit NVIDIA GeForce GT 540M Ubuntu 12.04 LTS All other specs are irrelevant unless I forgot something? Methods Tried: aptitude install nvidia-current (all packages) Results: Nothing really happened. Nothing in the additional drivers menu appeared, nor was the NVIDIA X Server settings application allowing access because it thought there was no NVIDIA X Server installed. Downloaded driver from nvidia.com. Set nomodeset in the grub boot menu through /boot/grub/grub.cfg Went to console and turned off lightdm. Installed the driver, but it said the pre-install failed? (mean anything?) Started up lightdm again. Results: NVIDIA X Server settings still didn't notice it. Even tried to do nvidia-xconfig multiple times. I also went into the config file to make sure the driver setting said "nvidia". aptitude install nvidia-173 (all packages) Results: Couldn't find the xorg-video-abi-10 virtual package. It was nowhere to be found and the ubuntu forums everywhere had no answers. Lots of people were having this problem. This is easily done in windows, simply download the driver and debug in visual studio with no problems at all. I'd like clear step-by-step instructions on how I should go about this. I'm relatively new to linux but I can find my way around pretty well so you aren't talking to a straight-up beginner. Also, if you think another thread may have the answer please post because I was having a hard time looking for my specific type of problem. TL;DR I want to have access to my GPU so I can code with CUDA while in Ubuntu 12.04 on my 64 bit laptop that also has Intel integrated graphics on the processor. Solution: sudo apt-add-repository ppa:ubuntu-x-swat/x-updates && sudo apt-get update && sudo apt-get upgrade && sudo apt-get install nvidia-current

    Read the article

  • OpenVPN: Connection established but can’t connect to server

    - by Maik
    I am trying to set up OpenVPN to allow me to connect a number of laptops to my network in a way that allows the laptops to connect to specific computers via HTTP (to e.g. a server management page) and windows shares (to access files) In the test environment my laptops live in a network with a 192.168.1.X address range. The host-network has a 10.66.77.X address range The server hosting the OpenVPN server has address 10.77.10.20. I need to access some application server web pages on this machine, accessible on various ports The server with the windows shares as well as some other web based pages I need to access is on address 10.66.77.20 The config files for server and laptop are attached below. The laptop establishes the VPN connection without problems, but I cannot access any of the machines, even a simple ping fails. Maybe a routing problem? The routing table for the laptop is shown below as well - every idea is appreciated! Thanks! Maik Server config file port 1194 dev tun tls-server ca /etc/openvpn/keys/ca.crt cert /etc/openvpn/keys/projects.crt key /etc/openvpn/keys/projects.key dh /etc/openvpn/keys/dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "route 10.66.77.0 255.255.255.0" keepalive 10 60 inactive 600 route 10.8.0.1 255.255.255.0 user openvpn group openvpn persist-tun persist-key verb 4 client config file dev tun proto udp remote SERVERADDR 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert accountingLaptop.crt key accountingLaptop.key ns-cert-type server comp-lzo verb 3 Resulting routing table on client laptop C:\Documents and Settings\User>route print =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 23 5a 9b 64 9b ...... Atheros AR8132 PCI-E Fast Ethernet Controller - Packet Scheduler Miniport 0x3 ...00 24 2c 35 c9 6b ...... Dell Wireless 1395 WLAN Mini-Card - Packet Sched uler Miniport 0x4 ...00 ff 5e 03 43 9b ...... TAP-Win32 Adapter V9 - Packet Scheduler Miniport =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.129 25 10.8.0.1 255.255.255.255 10.8.0.5 10.8.0.6 1 10.8.0.4 255.255.255.252 10.8.0.6 10.8.0.6 30 10.8.0.6 255.255.255.255 127.0.0.1 127.0.0.1 30 10.66.77.0 255.255.255.0 10.8.0.5 10.8.0.6 1 10.255.255.255 255.255.255.255 10.8.0.6 10.8.0.6 30 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.1.0 255.255.255.0 192.168.1.129 192.168.1.129 25 192.168.1.129 255.255.255.255 127.0.0.1 127.0.0.1 25 192.168.1.255 255.255.255.255 192.168.1.129 192.168.1.129 25 224.0.0.0 240.0.0.0 10.8.0.6 10.8.0.6 30 224.0.0.0 240.0.0.0 192.168.1.129 192.168.1.129 25 255.255.255.255 255.255.255.255 10.8.0.6 2 1 255.255.255.255 255.255.255.255 10.8.0.6 10.8.0.6 1 255.255.255.255 255.255.255.255 192.168.1.129 192.168.1.129 1 Default Gateway: 192.168.1.1 =========================================================================== Persistent Routes: None

    Read the article

  • Dual head setup for Ubuntu 10.04.1 and Windows XP Pro with same hardware configuration

    - by mejpark
    Hello. I have a Dell OptiPlex 360 workstation at work, with 2 x ATI RV280 [Radeon 9200 PRO] graphics cards installed, which are attached to two identical 19" HII flat panel monitors. I'm using the open source Radeon driver with Ubuntu, and the proprietary drivers with Windows. The good news is that dual head configuration works for both OSes. The bad news is, I have to use a different hardware configuration for each OS to achieve this. Hardware config #1: Dual monitors work for Windows XP Pro like this: First display -> external VGA port Second display -> DVI input on gfx card Hardware config #2: Dual monitors work for Ubuntu 10.04.1 like this: First display -> VGA port on gfx card Second display -> DVI input on gfx card I connected up the displays according to Config #2 and booted up Windows, which resulted in a mirror image on both screens. I was unable to login, as the login box was not visible. I unplugged the VGA lead from gfx card and plugged it into the external VGA port (Config #1) - Windows dual head works again, but the VGA-connected screen is not recognised by Ubuntu and remains in standby mode. Is it possible to configure a dual head setup for Ubuntu using Config #1, or am I missing something? I tried setting up dual monitors using Config #1, this morning which didn't work. By default, there is no xorg.conf file in Ubuntu 10.04.1, so I generated one using: $ sudo X :2 -configure X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-27-server i686 Ubuntu Current Operating System: Linux harrier 2.6.32-24-generic #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=a34c1931-98d4-4a34-880c-c227a2936c4a ro quiet splash Build Date: 21 July 2010 12:47:34PM xorg-server 2:1.7.6-2ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.2.log", Time: Mon Sep 13 10:02:02 2010 List of video drivers: apm ark intel mach64 s3virge trident mga tseng ati nouveau neomagic i740 openchrome voodoo s3 i128 radeon siliconmotion nv ztv vmware v4l chips rendition savage sisusb tdfx geode sis r128 cirrus fbdev vesa (++) Using config file: "/home/michael/xorg.conf.new" (==) Using config directory: "/usr/lib/X11/xorg.conf.d" (II) [KMS] No DRICreatePCIBusID symbol, no kernel modesetting. Xorg detected your mouse at device /dev/input/mice. Please check your config if the mouse is still not operational, as by default Xorg tries to autodetect the protocol. Xorg has configured a multihead system, please check your config. Your xorg.conf file is /home/michael/xorg.conf.new To test the server, run 'X -config /home/michael/xorg.conf.new' ddxSigGiveUp: Closing log $ sudo X -config /home/michael/xorg.conf.new Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again. Please consult the The X.Org Foundation support at http://wiki.x.org for help. ddxSigGiveUp: Closing log I then booted Ubuntu in failsafe mode, dropped into root shell, and executed $ X -config /home/michael/xorg.conf.new again. The screen went blank and turned off, so I reset the machine. There must be a way round this. Any help to set up a dual head config for Ubuntu using Config #1 would be hugely appreciated. TIA, Mike

    Read the article

  • Cannot turn on "Network Discovery and File Sharing" when Windows Firewall is enabled

    - by Cheeso
    I have a problem similar to this one. Windows Firewall prevents File and Printer sharing from working and Why does File and Printer Sharing keep turning off in Windows 7? I cannot turn on Network Discovery. This is Windows 7 Home Premium, x64. It's a Dell XPS 1340 and Windows came installed from the OEM. This used to work. Now it doesn't. I don't know what has changed. In windows Explorer, the UI looks like this: When I click the yellow panel that says "Click to change...", the panel disappears, then immediately reappears, with exactly the same text. If I go through the control panel "Network and Sharing Center" thing, the UI looks like this: If I tick the box to "turn on network discovery", the "Save Changes" button becomes enabled. If I then click that button, the dialog box just closes, with no message or confirmation. Re-opening the same dialog box shows that Network Discovery has not been turned on. If I turn off Windows Firewall, I can then turn on Network Discovery via either method. The machine is connected to a wireless home network, via a router. The network is marked as "Home Network" in the Network and Sharing Center, which I think corresponds to the "Private" profile in Windows Firewall Advanced Settings app. (Confirm?) The PC is not part of a domain, and has never been part of a domain. The machine is not bridging any networks. There is a regular 100baseT connector but I have the network adapter for that disabled in Windows. Something else that seems odd. Within Windows Firewall Advanced Settings, there are no predefined rules available. If I click the "New Rule...." Action on the action pane, the "Predefined" option is greyed out. like this: In order to attempt to allow the network discovery protocols through on the private network, I hand-coded a bunch of rules, intending to allow the necessary UPnP and WDP protocols supporting network discovery. I copied them from a working Windows 7 Ultimate PC, running on the same network. This did not work. Even with the hand-coded rules, I still cannot turn on Network Discovery. I looked on the interwebs, and the only solution that appears to work is a re-install of Windows. Seriously? If I try netsh advfirewall firewall set rule group="Network Discovery" new enable=Yes ...it says "No rules match the specified criteria" EDIT: by the way, these services are running. DNS Client Function Discovery Resource Publication SSDP Discovery UPnP Device Host in any case, since it works with no firewall, I would assume all necessary services are present and running. The issue is a firewall thing, but I don't know how to diagnose further, or fix it. Q1: Is there a way to definitively insure the correct holes are punched through the Windows Firewall to allow Network Discovery to function? Q2: Should I expect the "predefined" firewall rules to be greyed out? Q3: Why did this change?

    Read the article

  • Kernel Mode Rootkit

    - by Pajarito
    On the other 3 computers in my family, I believe that we have a kernel-mode rootkit for windows. It appears that the same rootkit is on all of them. We think. We changed all the important passwords from my computer, running linux right now. On all of the infected computers is Symantic Endpoint Protection, because it's free from the university where my mom and dad work. In my opinion symantec is a piece of crap, seeing as it didn't even manager to delete the tracking cookies it found when I tried it on my own computer. The Computers and their set-ups: Computer A: Vista Business; symantec antivirus. runs it as admin, no password. IE8. no other security software other than what comes with windows. IE8 security settings the default Computer B: XP Home Premium; symantec antivirus. runs as normal user, no password, admin account with weak password, spybot, uses IE8 with default settings, sometimes Firefox Computer C: XP Home Premium; symantec antivirus. runs as normal user, no password, admin account with weak password, uses IE8 with default settings, no other security programs except what came with windows This is what's happening. Cut and pasted from my dad's forum post. -- When I scanned my laptop (Dell XPS M1330 with Windows Vista Small Business), Symantec Endpoint Protection hangs for a while, perhaps 10 seconds or so, on some of the following files 9129837.exe, hide_evr2.sys, VirusRemoval.vbs, NewVirusRemoval.vbs, dll.dll, alsmt.ext, and _epnt.sys. It does this if a run a scan that I set up to run on a new thumbnail drive and it does this even if the thumbnail is not plugged in. It doesn't seem to do this if I scan only the C: drive. I've check for problems with symantec endpoint protection and also with Microsoft Security Essentials and Malwarebytes Anti-Malware. They found nothing and I can't find anything by searching for hidden files. Next I tried microsoft's rootkitrevealer. It (rootkitrevealer) finds 279660 (or so) discrepancies and the interface is so glitchy after that I can't really figure out what is going on. The screen is squirrely. The rootkitrevealer pulls up many files in the folder \programdata\applicationdata and there are numberous appended \applicationdata on the end of that as well. -- As you can see, what we did was install MSE and MBAM and scan with both of them. Nothing but a tracking cookie. Then I took over and ran rootkitrevealer.exe from MicroSoft from a flash drive. It found a bunch of discrepancies, but only about 20 or so where security related, the rest being files that you just couldn't see from Windows Explorer. I couldn't see whether of not the files list above, the ones that the scan was hanging on, where in the list. The other thing is, I have no idea what to do about the things the scan comes up with. Then we checked the other computers and they do the same thing when you scan with Symantec. The people at the university seen to think that dad might not have a virus, but 2 of the computers slowed down noticably AND IE8 started acting all funny. None of my family is very computer oriented, and 2 of the possible causes for the rootkit are: -My dad bought a new flash drive, which shipped with a data security executable on it -My dad has to download lots of articles for his work Those are the only things that stand out, but it could have been anything. We are currently backing up our data, and I'll post again after trying IceSword 1.22. I just looked at my dad's forum topic, and someone recommended GMER. I'll try that too.

    Read the article

  • Ubuntu server random hangups.

    - by Ebbe
    Hello all. this is my first post to this forum which I found through the superb podcast "It Conversations" from StackOverFlow. I am quite in my role as server administrator for an exhibition center in London. Basically we have a central file and sql server to which roughly 40 stations connects to to upload/download data used/captured by a set of applications. Over the last weeks we have experienced a few random hangups to our applications, and as it always happen to multiple applications simultaneously I do not believe that the applications are the source of the problem. We also monitor the network using Dartware Intermapper which indicates that all switches and stations on the network has been reachable during the downtime. Thus, its all pointing to the server. I have been looking through all log files I can think of and the only thing so far that I have found suspicious is the following lines in the syslog which are from the time of one of the hangups: Feb 6 17:14:27 es named[5582]: client 127.0.0.1#33721: RFC 1918 response from Internet for 150.0.168.192.in-addr.arpa Feb 6 17:14:40 es named[5582]: client 127.0.0.1#32899: RFC 1918 response from Internet for 152.0.168.192.in-addr.arpa Feb 6 17:15:01 es /USR/SBIN/CRON[1956]: (es) CMD (/home/es/apps/es/bin/es_checksum.sh) Feb 6 17:16:06 es /USR/SBIN/CRON[2031]: (es) CMD (/home/es/apps/es/bin/es_checksum.sh) Feb 6 17:21:00 es named[5582]: *** POKED TIMER *** Feb 6 17:21:00 es last message repeated 2 times Feb 6 17:21:07 es named[5582]: client 127.0.0.1#44194: RFC 1918 response from Internet for 143.0.168.192.in-addr.arpa Feb 6 17:21:12 es named[5582]: client 127.0.0.1#59004: RFC 1918 response from Internet for 164.0.168.192.in-addr.arpa I find a few lines of interesting lines here: 1) "RFC 1918 response from Internet for 150.1.168.192.in-addr.arpa". I see this a lot in the syslog. And basically everytime I do a nslookup for any of the computers in the cluster I get a new similar line in the syslog. I understand from google that this has to do with reverse lookup problems. But I do not know how that could effect the systems. Lets say that one of these lines appear every time one of the userstations connects to the server, which may happen several times a second. Could this possible cause a hangup of the entire server? 2) POKED TIMER, I have googled this quite a lot, but not found an explaination that I can relate to. What does this mean? 3) The timestamps, it seems like the entire server has stopped responding for several minutes. Normally there are many printouts to the syslog per minute on this server. Furthermore the CRON job is set to run once every minute. Which according to the log, hasent happened here. OS: Ubuntu 8.04 Kernel: Linux 2.6.24-24-server x86_64 GNU/Linux. Hardware: Dell R710, RAID1, CPU: 2x XEON E5530. 16GB Memory. Average load is very low, and memory should not be a problem. Please let me know if you need any additional information. Best wishes, Ebbe

    Read the article

  • broadcom 5722 NIC not installed on Ubuntu Server, although driver present

    - by Bastien
    Hello, I just installed Ubuntu Server 10.04 LTS, running kernel 2.6.32-24-server, on a brand new Dell T110 server, supposedly fully compatible with Ubuntu Server. I have two NICs: one ONBOARD, the other additional on PCI. both of them are Broadcom netXtreme 5572. on the first boot of the system, I could see both cards as eth0 and eth1 (with ifconfig) I configured eth0 as static IP (as planned), and did not configure eth1. after rebooting, one of the two NICs "disappeared": it does not appear in ifconfig at all. the one that disappeared is the ONBOARD one. I investigated a bit and found the following things: the card is SEEN, but not "installed", it appears as "UNCLAIMED" in lshw: *-network UNCLAIMED description: Ethernet controller product: NetXtreme BCM5722 Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:04:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress cap_list configuration: latency=0 resources: memory:df9f0000-df9fffff *-network description: Ethernet interface product: NetXtreme BCM5722 Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 00 serial: 00:10:18:60:23:64 size: 100MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.102 duplex=full firmware=5722-v3.09 ip=10.129.167.25 latency=0 link=yes multicast=yes port=twisted pair speed=100MB/s resources: irq:35 memory:dfaf0000-dfafffff so I checked my dmesg and found a few strange lines, showing, there actually is a problem bringing up this card: [ 3.737506] tg3: Could not obtain valid ethernet address, aborting. [ 3.737527] tg3 0000:04:00.0: PCI INT A disabled [ 3.737535] tg3: probe of 0000:04:00.0 failed with error -22 [ 3.737553] alloc irq_desc for 17 on node -1 [ 3.737555] alloc kstat_irqs on node -1 [ 3.737560] tg3 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.737566] tg3 0000:05:00.0: setting latency timer to 64 [ 3.793529] eth0: Tigon3 [partno(BCM95722A2202G) rev a200] (PCI Express) MAC address 00:10:18:60:23:64 [ 3.793532] eth0: attached PHY is 5722/5756 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 3.793534] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 3.793536] eth0: dma_rwctrl[76180000] dma_mask[64-bit] that actually shows that one NIC is recognized, the other is not. I researched a bit more, with lspci -v: 04:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5722 Gigabit Ethernet PCI Express Subsystem: Broadcom Corporation NetXtreme BCM5722 Gigabit Ethernet PCI Express Flags: fast devsel, IRQ 16 Memory at df9f0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [48] Power Management version 3 Capabilities: [50] Vital Product Data <?> Capabilities: [58] Vendor Specific Information <?> Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting <?> Capabilities: [13c] Virtual Channel <?> Capabilities: [160] Device Serial Number 00-00-00-fe-ff-00-00-00 Kernel modules: tg3 05:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5722 Gigabit Ethernet PCI Express Subsystem: Broadcom Corporation NetXtreme BCM5722 Gigabit Ethernet PCI Express Flags: bus master, fast devsel, latency 0, IRQ 35 Memory at dfaf0000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: [48] Power Management version 3 Capabilities: [50] Vital Product Data <?> Capabilities: [58] Vendor Specific Information <?> Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting <?> Capabilities: [13c] Virtual Channel <?> Capabilities: [160] Device Serial Number 64-23-60-fe-ff-18-10-00 Capabilities: [16c] Power Budgeting <?> Kernel driver in use: tg3 Kernel modules: tg3 here I could see that the MAC address is 00-00-00-FE-FF-00-00-00, which, according to some forum posts on several websites, could be an issue. I've researched everything I could on the net, and found out several people having slightly comparable issues, but they usually involve different HW, and do not provide a proper explanation / solution... I would appreciate if anyone around here has some info to share ! thanks

    Read the article

  • Blank black screen with cursor after login -- RHEL5

    - by Sean O.
    I have a RHEL 5 machine here which is a Dell Precision T3500. I'm an Ubuntu guy, but I'm having a heck of a time with this machine. After processing its first security update, we cannot log in via the gdm greeter. A new kernel was installed; then I installed the nVidia drivers for our Quadro NVS 295. I know the X configuration is valid because the gdm greeter does display; however, upon login all we can get is a blank, black screen with a cursor. I thought perhaps our python installation was corrupted but a reinstall via yum has not helped. I have searched & googled extensively for a potential fix for this and can find nothing. Below are outputs from uname, a tail of an error in /var/log/messages, and the Xorg.conf. Can anyone suggest a course of action? [sean@cheetah ~]$ uname -a Linux cheetah.*.* 2.6.18-308.8.1.el5 #1 SMP Fri May 4 16:43:02 EDT 2012 x86_64 x86_64 x86_64 GNU/Linux [sean@cheetah ~]$ sudo tail /var/log/messages Jun 5 15:03:04 cheetah gconfd (sean-4592): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2 Jun 5 15:03:05 cheetah hcid[3855]: Default passkey agent (:1.8, /org/bluez/applet) registered Jun 5 15:03:05 cheetah pcscd: winscard.c:304:SCardConnect() Reader E-Gate 0 0 Not Found Jun 5 15:03:05 cheetah last message repeated 2 times Jun 5 15:03:06 cheetah gconfd (sean-4592): Resolved address "xml:readwrite:/home/sean/.gconf" to a writable configuration source at position 0 Jun 5 15:03:06 cheetah setroubleshoot: [program.ERROR] exception ImportError: /usr/lib/libatk-1.0.so.0: undefined symbol: g_assertion_message_expr Traceback (most recent call last): File "/usr/bin/sealert", line 952, in ? from setroubleshoot.gui_utils import * File "/usr/lib/python2.4/site-packages/setroubleshoot/gui_utils.py", line 26, in ? import gtk File "/usr/lib64/python2.4/site-packages/gtk-2.0/gtk/__init__.py", line 48, in ? from gtk import _gtk ImportError: /usr/lib/libatk-1.0.so.0: undefined symbol: g_assertion_message_expr Jun 5 15:03:07 cheetah setroubleshoot: [program.ERROR] exception ImportError: /usr/lib/libatk-1.0.so.0: undefined symbol: g_assertion_message_expr Traceback (most recent call last): File "/usr/bin/sealert", line 952, in ? from setroubleshoot.gui_utils import * File "/usr/lib/python2.4/site-packages/setroubleshoot/gui_utils.py", line 26, in ? import gtk File "/usr/lib64/python2.4/site-packages/gtk-2.0/gtk/__init__.py", line 48, in ? from gtk import _gtk ImportError: /usr/lib/libatk-1.0.so.0: undefined symbol: g_assertion_message_expr Jun 5 15:03:08 cheetah pcscd: winscard.c:304:SCardConnect() Reader E-Gate 0 0 Not Found Jun 5 15:07:01 cheetah ntpd[4114]: synchronized to 64.16.211.38, stratum 3 Jun 5 15:07:01 cheetah ntpd[4114]: kernel time sync enabled 0001 [sean@cheetah ~]$ cat /etc/X11/xorg.conf # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 295.53 ([email protected]) Sat May 12 00:34:20 PDT 2012 # Xorg configuration created by system-config-display Section "ServerLayout" Identifier "single head configuration" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "Monitor" ### Comment all HorizSync and VertSync values to use DDC: ### Comment all HorizSync and VertSync values to use DDC: Identifier "Monitor0" ModelName "LCD Panel 1600x1200" HorizSync 31.5 - 74.7 VertRefresh 56.0 - 65.0 Option "dpms" EndSection Section "Device" Identifier "Videocard0" Driver "nvidia" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

    Read the article

  • ESXI guests not using available CPU resources

    - by Alan M
    I have a VMWare ESXI 5.0.0 (it's a bit old, I know) host with three guest VMs on it. For reasons unknown, the guests will not use much of the availble CPU resources. I have all three guests in a single pool, with the hosts all configured to use the same amount of resource shares, so they're basically 33% each. The three guests are basically identically configured as far as their VM resources go. So the problem is, even when the guests are performing what should be very 'busy' activitites, such as at bootup, the actual host CPU consumed is something tiny, like 33mhz, when seen via vSphere console's "Virtual Machines" tab when viewing properties for the pool. And of course, the performance of the guest VMs is terrible. The host has plenty of CPU to spare. I've tried tinkering with individual guest VM resource settings; cranking up the reservation, etc. No matter. The guests just refuse to make use of the abundant CPU available to them, and insist on using a sliver of the available resources. Any suggestions? Update after reading various comments below Per the suggestions below, I did remove the guests from the application pool; this didn't make any difference. I do understand that the guests are not going to consume resources they do not need. I have tried to do a remote perfmon on the guest which is experiencing long boot times, but I cannot connect to the guest remotely with perfmon (guest is w2k8r2 server). Host graphs for CPU, Mem, Disk are basically flatlining; very little demand. Same is true for the guest stats; while the guest itself seems to be crawling, the guest resource graphing shows very little activity across CPU, Mem, Disk. Host is a Dell PowerEdge 2900, has 2 physical CPU,20gb RAM. (it's a test/dev environment using surplus gear) Guest1 has: VM ver. 7, 2vCPU, 4gb RAM, 140gb storage which lives on a RAID-5 array on the host. Guest2 has: VM ver. 7, 2vCPU, 4gb RAM, 140gb storage which lives on a RAID-5 array on the host. Guest3 has: VM ver. 7, 1vCPU, 2gb RAM, 2tb storage which lives on a RAID-5 ISCSI NAS box Perhaps I am making a false assumption that if a guest has a demand for CPU (e.g. Windows Task Manager shows 100% CPU), the host would supply the guest with more CPU (mem, disk) on demand. Another Update After checking the stats, it would appear that the host is indeed not busy at all, neither is the guest. I believe I have a good idea on the issue, though; a messed-up VMWare Tools install. The guest has VMware Tools on it, but the host says it does not. VMWare Tools refuses to uninstall, refuses to be upgraded, refuses to be recognized. While I cannot say with authority, this would appear to be something worth investigation. I do not know the origin of the guest itself, nor the specifics on the original VMWare Tools install. Following various bits of googling, I did come up with a few suggestions that went nowhere. To that end, I was going to delete this question, but was prompted not to do so since so many folks answered. My suspicion right now is; the problem truly is the guest; the guest is not making a demand on the host, and as a natural result, the host is treating the guest accordingly. My Final Update I am 99% certain the guest VM had something fundamentally wrong with it re VMWare Tools. I created a clone of a different VM with a near-identical OS config, but a properly working install of VMWare tools. The guest runs just great, and takes up it's allotment of resources when it needs to; e.g. it eats up about 850mhz CPU during startup, then ticks down to idle once the guest OS is stable.

    Read the article

  • No device file for partition on logical volume (Linux LVM)

    - by Brian
    I created a logical volume (scandata) containing a single ext3 partition. It is the only logical volume in its volume group (case4t). Said volume group is comprised by 3 physical volumes, which are three primary partitions on a single block device (/dev/sdb). When I created it, I could mount the partition via the block device /dev/mapper/case4t-scandatap1. Since last reboot the aforementioned block device file has disappeared. It may be of note -- I'm not sure -- that my superior (a college professor) had prompted this reboot by running sudo chmod -R [his name] /usr/bin, which obliterated all suid in its path, preventing the both of us from sudo-ing. That issue has been (temporarily) rectified via this operation. Now I'll cut the chatter and get started with the terminal dumps: $ sudo pvs; sudo vgs; sudo lvs Logging initialised at Sat Jan 8 11:42:34 2011 Set umask to 0077 Scanning for physical volume names PV VG Fmt Attr PSize PFree /dev/sdb1 case4t lvm2 a- 819.32G 0 /dev/sdb2 case4t lvm2 a- 866.40G 0 /dev/sdb3 case4t lvm2 a- 47.09G 0 Wiping internal VG cache Logging initialised at Sat Jan 8 11:42:34 2011 Set umask to 0077 Finding all volume groups Finding volume group "case4t" VG #PV #LV #SN Attr VSize VFree case4t 3 1 0 wz--n- 1.69T 0 Wiping internal VG cache Logging initialised at Sat Jan 8 11:42:34 2011 Set umask to 0077 Finding all logical volumes LV VG Attr LSize Origin Snap% Move Log Copy% Convert scandata case4t -wi-a- 1.69T Wiping internal VG cache $ sudo vgchange -a y Logging initialised at Sat Jan 8 11:43:14 2011 Set umask to 0077 Finding all volume groups Finding volume group "case4t" 1 logical volume(s) in volume group "case4t" already active 1 existing logical volume(s) in volume group "case4t" monitored Found volume group "case4t" Activated logical volumes in volume group "case4t" 1 logical volume(s) in volume group "case4t" now active Wiping internal VG cache $ ls /dev | grep case4t case4t $ ls /dev/mapper case4t-scandata control $ sudo fdisk -l /dev/case4t/scandata Disk /dev/case4t/scandata: 1860.5 GB, 1860584865792 bytes 255 heads, 63 sectors/track, 226203 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00049bf5 Device Boot Start End Blocks Id System /dev/case4t/scandata1 1 226203 1816975566 83 Linux $ sudo parted /dev/case4t/scandata print Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/case4t-scandata: 1861GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 1861GB 1861GB primary ext3 $ sudo fdisk -l /dev/sdb Disk /dev/sdb: 1860.5 GB, 1860593254400 bytes 255 heads, 63 sectors/track, 226204 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000081 Device Boot Start End Blocks Id System /dev/sdb1 1 106955 859116006 83 Linux /dev/sdb2 113103 226204 908491815 83 Linux /dev/sdb3 106956 113102 49375777+ 83 Linux Partition table entries are not in disk order $ sudo parted /dev/sdb print Model: DELL PERC 6/i (scsi) Disk /dev/sdb: 1861GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 880GB 880GB primary reiserfs 3 880GB 930GB 50.6GB primary 2 930GB 1861GB 930GB primary I find it a bit strange that partition one above is said to be reiserfs, or if it matters -- it was previously reiserfs, but LVM recognizes it as a PV. To reiterate, neither /dev/mapper/case4t-scandatap1 (which I had used previously) nor /dev/case4t/scandata1 (as printed by fdisk) exists. And /dev/case4t/scandata (no partition number) cannot be mounted: $sudo mount -t ext3 /dev/case4t/scandata /mnt/new mount: wrong fs type, bad option, bad superblock on /dev/mapper/case4t-scandata, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so All I get on syslog is: [170059.538137] VFS: Can't find ext3 filesystem on dev dm-0. Thanks in advance for any help you can offer, Brian P.S. I am on Ubuntu GNU/Linux 2.6.28-11-server (Jaunty) (out of date, I know -- that's on the laundry list).

    Read the article

  • Python in command line runs the wrong version?

    - by Deflect
    I have several versions of Python installed on a Windows 7 computer. I want to run Python 2.7 by default, but for whatever reason, typing python in the command line runs Python version 2.4.5. I've tried adding C:\Python27 to my system path variable as per this question, and manually combed my path variable it to make sure Python 2.4.5 wasn't tossed in there by mistake, but that didn't fix the issue. I have to type in C:\Python27\python.exe every time I want to access the correct version of python I want. What other places can I check? How can I make the command line use the correct version of python? I also found this but it's not for windows. [EDIT] My path (separated by semicolons): C:\Program Files\Common Files\Microsoft Shared\Windows Live; C:\Program Files (x86)\Common Files\Microsoft Shared\Windows Live; C:\Windows\system32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows\System32\WindowsPowerShell\v1.0\; C:\Program Files\Dell\DW WLAN Card\Driver; C:\Program Files (x86)\Common Files\Roxio Shared\DLLShared\; C:\Program Files (x86)\Windows Live\Shared; c:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\; c:\Program Files\Microsoft SQL Server\100\Tools\Binn\; c:\Program Files\Microsoft SQL Server\100\DTS\Binn\; C:\Program Files\TortoiseGit\bin; C:\Program Files\Java\jdk1.6.0_26\bin; C:\Program Files\Java\jdk1.6.0_21 ; C:\Program Files\IVI Foundation\VISA\Win64\Bin\; C:\Program Files (x86)\IVI Foundation\VISA\WinNT\Bin\; C:\Program Files (x86)\IVI Foundation\VISA\WinNT\Bin; C:\Program Files\WPIJavaCV\OpenCV_2.2.0\bin; C:\Program Files (x86)\LilyPond\usr\bin; C:\Program Files\TortoiseSVN\bin; C:\Program Files (x86)\doxygen\bin; C:\Program Files (x86)\Graphviz 2.28\bin; C:\Users\Michael\bin\Misc\cppcheck\; C:\Program Files (x86)\Git\cmd; C:\Python27\python.exe; C:\Ruby192\bin; C:\Users\Michael\AppData\Roaming\cabal\bin; C:\Python27\; [EDIT 2] Running python spews this out: 'import site' failed; used -v for traceback Python 2.4.5 (#1, Jul 22 2011, 02:01:04) [GCC 4.1.1] on mingw32 Type "help", "copyright", "credits" or "license" for more information. >>> ...and running python --version (as suggested below) seems to be an unrecognized option. (I also tried running python -v, and it appears that Python 2.4 is trying to import libraries from C:\Python27\Lib, and failed due to a syntax error when it encountered a with statement, which was added in later version, I think) Also, I'm not sure if it's significant or not, but the above python version says something about GCC and mingw32, while running C:\python27\python.exe shows this: Python 2.7.2 (default, Jun 12 2011, 15:08:59) [MSC v.1500 32 bit (Intel)] on win32 Type "help", "copyright", "credits" or "license" for more information. >>>>

    Read the article

  • Install Intel USB 3.0 eXtensible Host Controller Driver for Windows Server 2008 R2 x64

    - by ffrugone
    According to Intel and Dell, by board is technically a 'desktop' board and they therefore do not support Intel USB 3.0 eXtensible Host Controller drivers for Windows Server 2008 (R2 x64). I'm trying to find a workaround. I found an entry on someone who tried to tackle this, but I can't make his fix work for me. Below, I have copied both his entry, and my reply. I'm a loyal stackoverflow user, and hopefully the people here at serverfault can help me: anyforumuser Re: GA-Z77X-UD5H USB3 Drivers not installing? « Reply #6 on: July 05, 2012, 04:12:59 am » Thanks to JoeMiner , his process for the network drivers gave me the clues to figure out to get the USB3 drivers working. I have got the intel USB3 drivers working at full speed in win server 2008r2 you have to edit the following file : 1. mup.xml in change the "Windows7" to "W2K8" 2. in setup.if2 under [groups] line starting with "HSCSDRIVER " change the "IsOS( ... )" entry to "IsOS(WIN2008_R2,WIN2008_R2_MAXSP)" inf files for all copy the content of the [Intel.NTAMD64.6.1] group to the [Intel.NTAMD64.6.2] group driver folders. here i am not entirely sure which is correct so there are some double up's. in the drivers folder copy the "Win7" folder to "win2008" , "win2008_r2" and "x64" ie your drivers folder should now contain the "win2008" , "win2008_r2" and "x64" folders and they contain contents of the win7 folder (the inf files should of already been fixed) Run install , It should install properly and work now. You will have to reboot If it doesn't work remove the intel usb3 controllers from device manager and get it to "scan for hardware changes" Good luck !!! benevida Re: GA-Z77X-UD5H Intel Network Drivers not installing? « Reply #7 on: August 13, 2012, 02:21:14 pm » Thank you anyforumuser! A process for getting this driver installed was exactly what I needed. However, I've hit a snag. I believe I've followed every step exactly as written, but I'm getting an error during installation. I get the message "One or more files that are required for installation are either missing or corrupted. Setup will exit." Behind the error, the 'Setup Progress' shows the current step as "Copying File: C:\Program Files (x86)\Intel\Intel(R) USB 3.0 eXtensible Host Controller Driver\Drivers\iusb3xhc.man". I've checked the installation files, and iusb3xhc.man seems to be a viable file in all of the Windows 2008 sub-directories of the Drivers folder. Therefore I don't see how the file could be missing and I doubt that it is corrupted, (although it does NOT exist in the \Drivers\HCSwitch folder). I opened 'Setup.if2', and there are two aspects to the step of copying iusb3xhc.man that caught my eye. First, the steps immediately preceding are set to 'error=ignore'. If they hadn't completed successfully, this is the first step where we'd hear about it. Second, this is the first step where the relative path '%source%\drivers\%_os%\%_ia%\' is used. If I haven't named the Windows 2008 sub-directories correctly, I could see where things are fouling up. In any event, if someone could take a look and make suggestions I'd appreciate it. Thank you.

    Read the article

  • Fix overscan in Linux with Intel graphics Vizio HDTV

    - by Padenton
    I am connecting my server to my HDTV so that I can conveniently display it there. My VIZIO HDTV cuts off all 4 edges. I already realize it is not optimal to be running a GUI on a server; this server will not have much external traffic so I prefer it for convenience. I have already spent countless hours searching for a fix, but all I could find required an ATI or NVIDIA graphics card, or didn’t work. In Windows, the Intel driver has a setting for underscan, though it seems only to be available by a glitch. Here’s my specs: Ubuntu Linux (Quantal 12.10) (Likely to switch to Arch) This is a home server computer, with KDE for managing(for now, at least) Graphics: Intel HD Graphics 4000 from Ivy Bridge Motherboard: ASRock Z77 Extreme4 CPU: Intel Core i5-3450 My monitors: Dell LCD monitor Vizio VX37L_HDTV10A 37" on HDMI input I have tried all of the following from both HDMI?HDMI and DVI?HDMI cables connected to the ports on my motherboard: Setting properties in xrandr Making sure drivers are all up to date Trying several different modes The TV was “cheap”; max resolution 1080i. I am able to get a 1920x1080 modeline, in both GNU/Linux and Windows, without difficulty. There is no setting in the menu to fix the overscan (I have tried all of them, I realize it’s not always called overscan). I have been in the service menu for the TV, which still does not contain an option to fix it. No aspect ratio settings, etc. The TV has a VGA connector but I am unsure if it would fix it, as I don’t have a VGA cable long enough, and am not sure it would get me the 1920x1080 resolution which I want. Using another resolution does not fix the problem. I tried custom modelines with the dimensions of my screen’s viewable area, but it wouldn’t let me use them. Ubuntu apparently doesn’t automatically generate an xorg.conf file for use. I read somewhere that modifying it may help solve it. I tried X -configure several times(with reboots, etc.) but it consistently gave the following error messages: In log file: … (WW) Falling back to old probe method for vesa Number of created screens does not match number of detected devices. Configuration failed. In output: … (++) Using config file: "/root/xorg.conf.new" (==) Using system config directory "/usr/share/X11/xorg.conf.d" Number of created screens does not match number of detected devices. Configuration failed. Server terminated with error (2). Closing log file. Tried using 'overscan' prop in xrandr: root@xxx:/home/xxx# xrandr --output HDMI1 --set overscan off X Error of failed request: BadName (named color or font does not exist) Major opcode of failed request: 140 (RANDR) Minor opcode of failed request: 11 (RRQueryOutputProperty) Serial number of failed request: 42 Current serial number in output stream: 42 'overscan on', 'underscan off', 'underscan on' were all also tried. Originally tried with Ubuntu 12.04, but failed and so updated to 12.10 when it was released. All software is up to date. I am not opposed to reinstalling my OS, likely will anyways (my preference being Arch).

    Read the article

  • compile lastest bnx2 driver on debian squeeze

    - by markus
    I want to upgrade the bnx2 network card driver in a Dell Power Edge R410. I downloaded the latest driver version from the broadcom website. If I want to compile the driver it fails with the following errors: make make -C bnx2/src KVER=2.6.32-5-amd64 PREFIX= make[1]: Entering directory `/tmp/netxtreme2-6.2.23/bnx2-2.0.23b/src' make -C /lib/modules/2.6.32-5-amd64/build SUBDIRS=/tmp/netxtreme2-6.2.23/bnx2-2.0.23b/src modules make[2]: Entering directory `/usr/src/linux-headers-2.6.32-5-amd64' Building modules, stage 2. MODPOST 2 modules make[2]: Leaving directory `/usr/src/linux-headers-2.6.32-5-amd64' make[1]: Leaving directory `/tmp/netxtreme2-6.2.23/bnx2-2.0.23b/src' make -C bnx2x/src KVER=2.6.32-5-amd64 PREFIX= make[1]: Entering directory `/tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src' make -C /lib/modules/2.6.32-5-amd64/build M=`pwd` modules make[2]: Entering directory `/usr/src/linux-headers-2.6.32-5-amd64' CC [M] /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_main.o In file included from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x.h:68, from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_main.c:80: /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_compat.h:1009:1: error: "PCI_VPD_LRDT_ID_STRING" redefined In file included from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_main.c:34: /usr/src/linux-headers-2.6.32-5-common/include/linux/pci.h:1327:1: error: this is the location of the previous definition In file included from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x.h:68, from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_main.c:80: /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_compat.h:1011:1: error: "PCI_VPD_LRDT_RO_DATA" redefined In file included from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_main.c:34: /usr/src/linux-headers-2.6.32-5-common/include/linux/pci.h:1328:1: error: this is the location of the previous definition In file included from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x.h:68, from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_main.c:80: /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_compat.h:1013:1: error: "PCI_VPD_LRDT_RW_DATA" redefined In file included from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_main.c:34: /usr/src/linux-headers-2.6.32-5-common/include/linux/pci.h:1329:1: error: this is the location of the previous definition In file included from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x.h:68, from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_main.c:80: /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_compat.h:1019:1: error: "PCI_VPD_SRDT_END" redefined In file included from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_main.c:34: /usr/src/linux-headers-2.6.32-5-common/include/linux/pci.h:1334:1: error: this is the location of the previous definition In file included from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x.h:68, from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_main.c:80: /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_compat.h:1032: error: conflicting types for ‘pci_vpd_lrdt_size’ /usr/src/linux-headers-2.6.32-5-common/include/linux/pci.h:1355: error: previous definition of ‘pci_vpd_lrdt_size’ was here /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_compat.h:1037: error: conflicting types for ‘pci_vpd_srdt_size’ /usr/src/linux-headers-2.6.32-5-common/include/linux/pci.h:1366: error: previous definition of ‘pci_vpd_srdt_size’ was here /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_compat.h:1042: error: conflicting types for ‘pci_vpd_find_tag’ /usr/src/linux-headers-2.6.32-5-common/include/linux/pci.h:1391: error: previous declaration of ‘pci_vpd_find_tag’ was here /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_compat.h:1077: error: conflicting types for ‘pci_vpd_info_field_size’ /usr/src/linux-headers-2.6.32-5-common/include/linux/pci.h:1377: error: previous definition of ‘pci_vpd_info_field_size’ was here /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_compat.h:1082: error: conflicting types for ‘pci_vpd_find_info_keyword’ /usr/src/linux-headers-2.6.32-5-common/include/linux/pci.h:1403: error: previous declaration of ‘pci_vpd_find_info_keyword’ was here make[5]: *** [/tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_main.o] Fehler 1 make[4]: *** [_module_/tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src] Fehler 2 make[3]: *** [sub-make] Fehler 2 make[2]: *** [all] Fehler 2 make[2]: Leaving directory `/usr/src/linux-headers-2.6.32-5-amd64' make[1]: *** [bnx2x.o] Fehler 2 make[1]: Leaving directory `/tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src' make: *** [l2build] Fehler 2

    Read the article

  • Dual head setup for Ubuntu 10.04.1 and Windows XP Pro with same hardware configuration

    - by mejpark
    I have a Dell OptiPlex 360 workstation at work, with 2 x ATI RV280 [Radeon 9200 PRO] graphics cards installed, which are attached to two identical 19" HII flat panel monitors. I'm using the open source Radeon driver with Ubuntu, and the proprietary drivers with Windows. The good news is that dual head configuration works for both OSes. The bad news is, I have to use a different hardware configuration for each OS to achieve this. Hardware config #1: Dual monitors work for Windows XP Pro like this: First display -> external VGA port Second display -> DVI input on gfx card Hardware config #2: Dual monitors work for Ubuntu 10.04.1 like this: First display -> VGA port on gfx card Second display -> DVI input on gfx card I connected up the displays according to Config #2 and booted up Windows, which resulted in a mirror image on both screens. I was unable to login, as the login box was not visible. I unplugged the VGA lead from gfx card and plugged it into the external VGA port (Config #1) - Windows dual head works again, but the VGA-connected screen is not recognised by Ubuntu and remains in standby mode. Is it possible to configure a dual head setup for Ubuntu using Config #1, or am I missing something? I tried setting up dual monitors using Config #1, this morning which didn't work. By default, there is no xorg.conf file in Ubuntu 10.04.1, so I generated one using: $ sudo X :2 -configure X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-27-server i686 Ubuntu Current Operating System: Linux harrier 2.6.32-24-generic #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=a34c1931-98d4-4a34-880c-c227a2936c4a ro quiet splash Build Date: 21 July 2010 12:47:34PM xorg-server 2:1.7.6-2ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.2.log", Time: Mon Sep 13 10:02:02 2010 List of video drivers: apm ark intel mach64 s3virge trident mga tseng ati nouveau neomagic i740 openchrome voodoo s3 i128 radeon siliconmotion nv ztv vmware v4l chips rendition savage sisusb tdfx geode sis r128 cirrus fbdev vesa (++) Using config file: "/home/michael/xorg.conf.new" (==) Using config directory: "/usr/lib/X11/xorg.conf.d" (II) [KMS] No DRICreatePCIBusID symbol, no kernel modesetting. Xorg detected your mouse at device /dev/input/mice. Please check your config if the mouse is still not operational, as by default Xorg tries to autodetect the protocol. Xorg has configured a multihead system, please check your config. Your xorg.conf file is /home/michael/xorg.conf.new To test the server, run 'X -config /home/michael/xorg.conf.new' ddxSigGiveUp: Closing log $ sudo X -config /home/michael/xorg.conf.new Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again. Please consult the The X.Org Foundation support at http://wiki.x.org for help. ddxSigGiveUp: Closing log I then booted Ubuntu in failsafe mode, dropped into root shell, and executed $ X -config /home/michael/xorg.conf.new again. The screen went blank and turned off, so

    Read the article

  • Cheapest way to connect 20-24 Sata II HDDs in a budget storage server?

    - by Joe Hopfgartner
    I need to assemble a high density storage server for as cheap as possible. It's been a while for me and the last systems I integrated didn't even have Sata yet... During my Research I of course stumbled about Nexsan SATA Beast, the BackBlaze storage Pods as well as some ridiculously overpriced HP Proliant or Dell storage solutions. Finally I choose Norco cases as the way to go. My eye is set on the RPC-4020, which is a 4U 19" Rackmount case with 20 Hot Swap 3.5" SATA/SAS Hdd trays (Backplanes included) and room for two 2.5" OS drives as well as a Slim Line CD-Rom. The backplanes connect with a single SATA port for each drive, so there are 20 internal SATA ports to to be connected. They also have redundant power ports which I think is quite nice. The cheapest price I have found is 290$ + 40$ shipping. In europe the cheapest unfortunately is 370€ (500$) + 40 € shipping... A nice alternative would be the RPC-4224 which has SFF-8087 Mini SAS connectors that bundle 4 SATA trays each. But it doesn't seem to be available in Europe (where i am) anywhere. So here comes my problem: What Mainboard/Controller to choose to connect them for as cheap as possible while still having nice data rates? I have to say that the server is intended as a Storage server with 1gps connectivity and the data transfer will be distributed very evenly across all drives. I also don't require any raid functionality. This is all done at application level, I just need JBOD. So for example if I go for the RPC 4020 Model I need to connect 20 Storage + 1 OS + 1 CDROM Sata ports. I searched a bit and stumbled across this very low priced controller: http://www.intel.com/products/server/raid-controllers/SASWT4I/SASWT4I-overview.htm They sell it for 115 € here and the specs say it can control up to 122 hard discs and has 4 Mini SAS connectors. So I would use 4 Mini SAS 36pin - 4 SATA 7pin cables to connect 4 SATA drives to each port and choose a Mainboard taht has 6 SATA on board (for example this one) and hurray, I can connect my 22 SATA devices for as low as about ~ 220 EUR (cpu, ram, psu, case not counted) Question: WOULD THAT WORK? And if not, why? 2nd Question: If I go for the 4220 or 4224 Model, I have internal Mini SAS connectors. Am I right in assuming that the backplane than acts as a "SAS Expander"? And can I just plug these SAS connectors into any SAS port I can find on my controller / mainboard or are there certain requirements? I know that SATA port multipliers only work with controllers that are ready for that. But isn't this expansion already implemented in the SAS standard? I am sorry that this is a very broad question, but I really spent the last week reading up and it seems to be not so clear! Especially all the controlling hardware specifications! 3rd Question: A lot of hardware specs feature "internal channels" and "internal connectors". The connecors are the physical numbers of places where I can plug a cable in. I got that. But are the "internal channels" always the maximum numbers of physical drives that can be used in the end? Or can I enhance this further by Expanders/Fanouts? 4th and last question: What do you think about the setup so far? Do you know any good alternatives? Maby I am completely going the wrong way and some DAS would be way better? Are there any comparable chassis available in europe? Please feel free to say whatever you think is relevant to the subject!

    Read the article

  • How do i change the BIOS boot splash screen?

    - by YumYumYum
    I have a Dell PC which has very ugly and bad luck looking Alien face on every boot. I want to change it or disable it forever, but in Bios they do not have any options. How can i change this from my linux Fedora or ArchLinux which is running now? Tried following does not work. ( http://www.pixelbeat.org/docs/bios/ ) ./flashrom -r firmware.old #save current flash ROM just in case ./flashrom -wv firmware.new #write and verify new flash ROM image Also tried: $ cat c.c #include <stdio.h> #include <inttypes.h> #include <netinet/in.h> #include <stdlib.h> #include <string.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> #define lengthof(x) (sizeof(x)/sizeof(x[0])) uint16_t checksum(const uint8_t* data, int len) { uint16_t sum = 0; int i; for (i=0; i<len; i++) sum+=*(data+i); return htons(sum); } void usage(void) { fprintf(stderr,"Usage: therm_limit [0,50,53,56,60,63,66,70]\n"); fprintf(stderr,"Report therm limit of terminal in BIOS\n"); fprintf(stderr,"If temp specifed, it is changed if required.\n"); exit(EXIT_FAILURE); } #define CHKSUM_START 51 #define CHKSUM_END 109 #define THERM_OFFSET 67 #define THERM_SHIFT 0 #define THERM_MASK (0x7 << THERM_SHIFT) #define THERM_OFF 0 uint8_t thermal_limits[]={0,50,53,56,60,63,66,70}; #define THERM_MAX (lengthof(thermal_limits)-1) #define DEV_NVRAM "/dev/nvram" #define NVRAM_MAX 114 uint8_t nvram[NVRAM_MAX]; int main(int argc, char* argv[]) { int therm_request = -1; if (argc>2) usage(); if (argc==2) { if (*argv[1]=='-') usage(); therm_request=atoi(argv[1]); int i; for (i=0; i<lengthof(thermal_limits); i++) if (thermal_limits[i]==therm_request) break; if (i==lengthof(thermal_limits)) usage(); else therm_request=i; } int fd_nvram=open(DEV_NVRAM, O_RDWR); if (fd_nvram < 0) { fprintf(stderr,"Error opening %s [%m]\n", DEV_NVRAM); exit(EXIT_FAILURE); } if (read(fd_nvram, nvram, sizeof(nvram))==-1) { fprintf(stderr,"Error reading %s [%m]\n", DEV_NVRAM); close(fd_nvram); exit(EXIT_FAILURE); } uint16_t chksum = *(uint16_t*)(nvram+CHKSUM_END); printf("%04X\n",chksum); exit(0); if (chksum == checksum(nvram+CHKSUM_START, CHKSUM_END-CHKSUM_START)) { uint8_t therm_byte = *(uint16_t*)(nvram+THERM_OFFSET); uint8_t therm_status=(therm_byte & THERM_MASK) >> THERM_SHIFT; printf("Current thermal limit: %d°C\n", thermal_limits[therm_status]); if ( (therm_status == therm_request) ) therm_request=-1; if (therm_request != -1) { if (therm_status != therm_request) printf("Setting thermal limit to %d°C\n", thermal_limits[therm_request]); uint8_t new_therm_byte = (therm_byte & ~THERM_MASK) | (therm_request << THERM_SHIFT); *(uint8_t*)(nvram+THERM_OFFSET) = new_therm_byte; *(uint16_t*)(nvram+CHKSUM_END) = checksum(nvram+CHKSUM_START, CHKSUM_END-CHKSUM_START); (void) lseek(fd_nvram,0,SEEK_SET); if (write(fd_nvram, nvram, sizeof(nvram))!=sizeof(nvram)) { fprintf(stderr,"Error writing %s [%m]\n", DEV_NVRAM); close(fd_nvram); exit(EXIT_FAILURE); } } } else { fprintf(stderr,"checksum failed. Aborting\n"); close(fd_nvram); exit(EXIT_FAILURE); } return EXIT_SUCCESS; } $ gcc c.c -o bios # ./bios 16DB

    Read the article

  • bash: per-command history. How does it work?

    - by romainl
    OK. I have an old G5 running Leopard and a Dell running Ubuntu 10.04 at home and a MacPro also running Leopard at work. I use Terminal.app/bash a lot. On my home G5 it exhibits a nice feature: using ? to navigate history I get the last command starting with the few letters that I've typed. This is what I mean (| represents the caret): $ ssh user@server $ vim /some/file/just/to/populate/history $ ss| So, I've typed the two first letters of "ssh", hitting ? results in this: $ ssh user@server instead of this, which is the behaviour I get everywhere else : $ vim /some/file/just/to/populate/history If I keep on hitting ? or ?, I can navigate through the history of ssh like this: $ ssh otheruser@otherserver $ ssh user@server $ ssh yetanotheruser@yetanotherserver It works the same for any command like cat, vim or whatever. That's really cool. Except that I have no idea how to mimic this behaviour on my other machines. Here is my .profile: export PATH=/Developer/SDKs/flex_sdk_3.4/bin:/opt/local/bin:/opt/local/sbin:/usr/local/bin:/sw/bin:/sw/sbin:/bin:/sbin:/bin:/sbin:/usr/bin:/usr/sbin:$HOME/Applications/bin:/usr/X11R6/bin export MANPATH=/usr/local/share/man:/usr/local/man:opt/local/man:sw/share/man export INFO=/usr/local/share/info export PERL5LIB=/opt/local/lib/perl5 export PYTHONPATH=/opt/local/bin/python2.7 export EDITOR=/opt/local/bin/vim export VISUAL=/opt/local/bin/vim export JAVA_HOME=/System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home export TERM=xterm-color export GREP_OPTIONS='--color=auto' GREP_COLOR='1;32' export CLICOLOR=1 export LS_COLORS='no=00:fi=00:di=01;34:ln=target:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.deb=00;31:*.rpm=00;31:*.TAR=00;31:*.TGZ=00;31:*.ARJ=00;31:*.TAZ=00;31:*.LZH=00;31:*.ZIP=00;31:*.Z=00;31:*.Z=00;31:*.GZ=00;31:*.BZ2=00;31:*.DEB=00;31:*.RPM=00;31:*.jpg=00;35:*.png=00;35:*.gif=00;35:*.bmp=00;35:*.ppm=00;35:*.tga=00;35:*.xbm=00;35:*.xpm=00;35:*.tif=00;35:*.png=00;35:*.fli=00;35:*.gl=00;35:*.dl=00;35:*.psd=00;35:*.JPG=00;35:*.PNG=00;35:*.GIF=00;35:*.BMP=00;35:*.PPM=00;35:*.TGA=00;35:*.XBM=00;35:*.XPM=00;35:*.TIF=00;35:*.PNG=00;35:*.FLI=00;35:*.GL=00;35:*.DL=00;35:*.PSD=00;35:*.mpg=00;36:*.avi=00;36:*.mov=00;36:*.flv=00;36:*.divx=00;36:*.qt=00;36:*.mp4=00;36:*.m4v=00;36:*.MPG=00;36:*.AVI=00;36:*.MOV=00;36:*.FLV=00;36:*.DIVX=00;36:*.QT=00;36:*.MP4=00;36:*.M4V=00;36:*.txt=00;32:*.rtf=00;32:*.doc=00;32:*.odf=00;32:*.rtfd=00;32:*.html=00;32:*.css=00;32:*.js=00;32:*.php=00;32:*.xhtml=00;32:*.TXT=00;32:*.RTF=00;32:*.DOC=00;32:*.ODF=00;32:*.RTFD=00;32:*.HTML=00;32:*.CSS=00;32:*.JS=00;32:*.PHP=00;32:*.XHTML=00;32:' export LC_ALL=C export LANG=C stty cs8 -istrip -parenb bind 'set convert-meta off' bind 'set meta-flag on' bind 'set output-meta on' alias ip='curl http://www.whatismyip.org | pbcopy' alias ls='ls -FhLlGp' alias la='ls -AFhLlGp' alias couleurs='$HOME/Applications/bin/colors2.sh' alias td='$HOME/Applications/bin/todo.sh' alias scale='$HOME/Applications/bin/scale.sh' alias stree='$HOME/Applications/bin/tree' alias envoi='$HOME/Applications/bin/envoi.sh' alias unfoo='$HOME/Applications/bin/unfoo' alias up='cd ..' alias size='du -sh' alias lsvn='svn list -vR' alias jsc='/System/Library/Frameworks/JavaScriptCore.framework/Versions/A/Resources/jsc' alias asl='sudo rm -f /private/var/log/asl/*.asl' alias trace='tail -f $HOME/Library/Preferences/Macromedia/Flash\ Player/Logs/flashlog.txt' alias redis='redis-server /opt/local/etc/redis.conf' source /Users/johncoltrane/Applications/bin/git-completion.sh export GIT_PS1_SHOWUNTRACKEDFILES=1 export GIT_PS1_SHOWUPSTREAM="verbose git" export GIT_PS1_SHOWDIRTYSTATE=1 export PS1='\n\[\033[32m\]\w\[\033[0m\] $(__git_ps1 "[%s]")\n\[\033[1;31m\]\[\033[31m\]\u\[\033[0m\] $ \[\033[0m\]' mkcd () { mkdir -p "$*" cd "$*" } function cdl { cd $1 la } n() { $EDITOR ~/Dropbox/nv/"$*".txt } nls () { ls -c ~/Dropbox/nv/ | grep "$*" } copy(){ curl -s -F 'sprunge=<-' http://sprunge.us | pbcopy } if [ -f /opt/local/etc/profile.d/cdargs-bash.sh ]; then source /opt/local/etc/profile.d/cdargs-bash.sh fi if [ -f /opt/local/etc/bash_completion ]; then . /opt/local/etc/bash_completion fi Any idea?

    Read the article

  • md/raid:md2: cannot start dirty degraded array, kernel panic

    - by nl-x
    After having made use of a remote power switch, my server did not come back online. When I went to the datacenter and reboot the computer on the spot I see the server booting (I see the centos progress bar with running almost all the way to the end) and eventually giving the following messages: md/raid:md2: cannot start dirty degraded array. md/raid:md2: failed to run raid set. md: pers->run() failed ... md/raid:md2: cannot start dirty degraded array. md/raid:md2: failed to run raid set. md: pers->run() failed ... Kernel panic - not syncing: Attempted to kill init! Pid: 1, comm: init not tainted 2.6.32-279.1.1.el6.i686 #1 Call Trace: [<c083bfbc>] ? panic+0x68/0x11c [<c045a501>] ? do_exit+0x741/0x750 [<c045a54c>] ? do_group_exit+0x3c/0xa0 [<c045a5c1>] ? sys_exit_group+0x11/0x20 [<c083eba4>] ? syscall_call+0x7/0xb [<c083007b>] ? cmos_wake_setup+0x62/0x112 The server runs CentOS and has software raid, and I don't have backups of the raid settings. The only backup I have is of /home and the database dumps. (Glad to at least have those though.) Since the server is an old Dell PowerEdge 1750 with no CD-ROM drive, I have no way of booting the machine from a boot disk. I also remember in the past that the server also wouldn't boot from a bootable USB disk. So the only way I know how to boot the server is to go to the datacenter, pick up the server and take it to the office. Screw open the server. Attach a cdrom drive to an IDE slot on the motherboard. And then boot it. I am hoping you guys could help me avoid this. I have looked a bit through the boot options and I found the following boot options. When CentOS is about to boot and interrupt the boot-countdown: CentOS (2.6.32-279.1.1.el63.i686) CentOS Linux (2.6.32-71.29.1.el6.i686) centos (2.6.32-71.el6.i686) I think the first configuration is the default one, because choosing that gets me to the above mentioned kernel panic. The other ones end with something like "Sleeping forever". I can press 'e' to edit boot commands, press 'a' to modify kernel arguments and press 'c' for grub command line. The command line gives a grub prompt. But I have no idea how to get the system to boot without (trying to) access the dirty partitions. What I want to do is off course: - boot the machine - check hard drive for errors - mark the drive as clean

    Read the article

  • How do I reset/update my BIOS for Optiplex GX280?

    - by Sam Langlhey
    So far this has been a nightmare for me, which has been frustrating me constantly. I am using Dell Optiplex GX280 with Windows XP home edition, which is running a BIOS version A04. Recently, i've rebooted the pc to find out that its not booting. It will get to the Windows boot up screen with the progress bar but only to restart to the same process again, over and over. Frustrated that I am, i've inserted the Windows recovery CD to at least either repair of reinstall the operating system to find out that was not possible. I hit F8 to have the boot options, each of the boot option that I've selected gave me an error saying: "Selected boot device is not available." Right after that, I went to the BIOS setting and did a diagnostic test, which recognized all the Boot devices onboard. Now, I cannot even repair of reinstall Windows XP, because the system is not booting from none of the boot devices. The surprise is when I removed the hard-drive from the computer and loaded it on into another computer successfully; that's right, there is nothing wrong with the hard drive. After that I was totally puzzled. I found a few pointers online saying that the BIOS start-up block might be corrupted itself and I might need to flash/update the BIOS. I found the detailed instruction on how to create a Boot up disk by downloading the BIOS firmware from the manufacture's website. I did exactly as instructed below: Download the latest version or your choose version of BIOS file for your computer or motherboard from the manufacturer’s support site. Rename the downloaded file to AMIBOOT.ROM. Copy the file to a floppy disk. Insert the floppy disk to the floppy drive. Turn on the system. After I did that and powered on the PC to boot from the floppy drive, it gave me this error message: "Non-System Disk or Disk Error. Replace and Strike any key when ready." I did all that, and I kept on pressing [Ctrl]+[Home] to force it, but it did not did any satisfying result. Desperate as I am, my next attempt is to try the instruction below. Since I want to be ready, in the event it does not work, do you have any solution that you can provide? Please keep in mind that I cannot boot from any of the devices at this moment. My only hope now is to come on with a solution that will work through the Floppy drive, since that's the only drive that affected. Thank you very much for your advice and support in advance. To create a Windows startup disk, insert a floppy disk into the drive of a similarly configured, working Windows XP system, launch My Computer, right-click the floppy disk icon, and select the Format command from the context menu. When you see the Format dialog box, leave all the default settings as they are and click the Start button. Once the format operation is complete, close the Format dialog box to return to My Computer, double-click the drive C icon to access the root directory, and copy the following three files to the floppy disk: Boot.ini NTLDR Ntdetect.com

    Read the article

< Previous Page | 98 99 100 101 102 103 104  | Next Page >