Search Results

Search found 2782 results on 112 pages for 'it policy'.

Page 102/112 | < Previous Page | 98 99 100 101 102 103 104 105 106 107 108 109  | Next Page >

• About Solaris 11 and UltraSPARC II/III/IV/IV+

  - by nospam(at)example.com (Joerg Moellenkamp)

  I know that I will get the usual amount of comments like "Oh, Jörg ? you can't be negative about Oracle" for this article. However as usual I want to explain the logic behind my reasoning. Yes ? I know that there is a lot of UltraSPARC III, IV and IV+ gear out there. But there are some very basic questions: Does your application you are currently running on this gear stops running just because you can't run Solaris 11 on it? What is the need to upgrade a system already in production to Solaris 11? I have the impression, that some people think that the systems get useless in the moment Oracle releases Solaris 11. I know that Sun sold UltraSPARC IV+ systems until 2009. The Sun SF490 introduced 2004 for example, that was a Sun SF480 with UltraSPARC IV and later with UltraSPARC IV+. And yes, Sun made some speedbumps. At that time the systems of the UltraSPARC III to IV+ generations were supported on Solaris 8, on Solaris 9 and on Solaris 10. However from my perspective we sold them to customers, which weren't able to migrate to Solaris 10 because they used applications not supported on Solaris 9 or who just didn't wanted to migrate to Solaris 10. Believe it or not ? I personally know two customers that migrated core systems to Solaris 10 in ? well 2008/9. This was especially true when the M3000 was announced in 2008 when it closed the darned single socket gap. It may be different at you site, however that's what I remember about that time when talking with customers. At first: Just because there is no Solaris 11 for UltraSPARC III, IV and IV+, it doesn't mean that Solaris 10 will go away anytime soon. I just want to point you to "Expect Lifetime Support - Hardware and Operating Systems". It states about Premier Support:Maintenance and software upgrades are included for Oracle operating systems and Oracle VM for a minimum of eight years from the general availability date.GA for Solaris 10 was in 2005. Plus 8 years ? 2013 ? at minimum. Then you can still opt for 3 years of "Extended Support" ? 2016 ? at minimum. 2016 your systems purchased in 2009 are 7 years old. Even on systems purchased at the very end of the lifetime of that system generation. That are the rules as written in the linked document. I said minimum The actual dates are even further in the future: Premier Support for Solaris 10 ends in 2015, Extended support ends 2018. Sustaining support ? indefinite. You will find this in the document "Oracle Lifetime Support Policy: Oracle Hardware and Operating Systems".So I don't understand when some people write, that Oracle is less protective about hardware investments than Sun. And for hardware it's the same as with Sun: Service 5 years after EOL as part of Premier Support. I would like to write about a different perspective as well: I have to be a little cautious here, because this is going in the roadmap area, so I will mention the public sources here: John Fowler told last year that we have to expect at at least 3x the single thread performance of T3 for T4. We have 8 cores in T4, as stated by Rick Hetherington. Let's assume for a moment that a T4 core will have the performance of a UltraSPARC core (just to simplify math and not to disclosing anything about the performance, all existing SPARC cores are considered equal). So given this pieces of information, you could consolidate 8 V215, 4 or 8 V245, 2 full blown V445,2 full blown 490, 2 full blown M3000 on a single T4 SPARC processor. The Fowler roadmap prezo talked about 4-socket systems with T4. So 32 V215, 16 to 8 V245, 8 fullblown V445, 8 full blown V490, 8 full blown M3000 in a system image. I think you get the idea. That said, most of the systems we are talking about have already amortized and perhaps it's just time to invest in new systems to yield other advantages like reduced space consumptions, like reduced power consumption, like some of the neat features sun4v gives you, and yes ? reduced number of processor licenses for Oracle and less money for Oracle HW/SW support. As much as I dislike it myself that my own UltraSPARC III and UltraSPARC II based systems won't run on Solaris 11 (and I have quite a few of them in my personal lab), I really think that the impact on production environments will be much less than most people think now. By the way: The reason for this move is a quite significant new feature. I will tell you that it was this feature, when it's out. I assume, telling just a word more could lead to much more time to blog.

  Read the article

• WIF-less claim extraction from ACS: SWT

  - by Elton Stoneman

  WIF with SAML is solid and flexible, but unless you need the power, it can be overkill for simple claim assertion, and in the REST world WIF doesn’t have support for the latest token formats.  Simple Web Token (SWT) may not be around forever, but while it's here it's a nice easy format which you can manipulate in .NET without having to go down the WIF route. Assuming you have set up a Relying Party in ACS, specifying SWT as the token format: When ACS redirects to your login page, it will POST the SWT in the first form variable. It comes through in the BinarySecurityToken element of a RequestSecurityTokenResponse XML payload , the SWT type is specified with a TokenType of http://schemas.xmlsoap.org/ws/2009/11/swt-token-profile-1.0 : <t:RequestSecurityTokenResponse xmlns:t="http://schemas.xmlsoap.org/ws/2005/02/trust">   <t:Lifetime>     <wsu:Created xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">2012-08-31T07:31:18.655Z</wsu:Created>     <wsu:Expires xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">2012-08-31T09:11:18.655Z</wsu:Expires>   </t:Lifetime>   <wsp:AppliesTo xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy">     <EndpointReference xmlns="http://www.w3.org/2005/08/addressing">       <Address>http://localhost/x.y.z</Address>     </EndpointReference>   </wsp:AppliesTo>   <t:RequestedSecurityToken>     <wsse:BinarySecurityToken wsu:Id="uuid:fc8d3332-d501-4bb0-84ba-d31aa95a1a6c" ValueType="http://schemas.xmlsoap.org/ws/2009/11/swt-token-profile-1.0" EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> [ base64string ] </wsse:BinarySecurityToken>   </t:RequestedSecurityToken>   <t:TokenType>http://schemas.xmlsoap.org/ws/2009/11/swt-token-profile-1.0</t:TokenType>   <t:RequestType>http://schemas.xmlsoap.org/ws/2005/02/trust/Issue</t:RequestType>   <t:KeyType>http://schemas.xmlsoap.org/ws/2005/05/identity/NoProofKey</t:KeyType> </t:RequestSecurityTokenResponse> Reading the SWT is as simple as base-64 decoding, then URL-decoding the element value:     var wrappedToken = XDocument.Parse(HttpContext.Current.Request.Form[1]);     var binaryToken = wrappedToken.Root.Descendants("{http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd}BinarySecurityToken").First();     var tokenBytes = Convert.FromBase64String(binaryToken.Value);     var token = Encoding.UTF8.GetString(tokenBytes);     var tokenType = wrappedToken.Root.Descendants("{http://schemas.xmlsoap.org/ws/2005/02/trust}TokenType").First().Value; The decoded token contains the claims as key/value pairs, along with the issuer, audience (ACS realm), expiry date and an HMAC hash, which are in query string format. Separate them on the ampersand, and you can write out the claim values in your logged-in page:     var decoded = HttpUtility.UrlDecode(token);     foreach (var part in decoded.Split('&'))     {         Response.Write("<pre>" + part + "</pre><br/>");     } - which will produce something like this: http://schemas.microsoft.com/ws/2008/06/identity/claims/authenticationinstant=2012-08-31T06:57:01.855Z http://schemas.microsoft.com/ws/2008/06/identity/claims/authenticationmethod=http://schemas.microsoft.com/ws/2008/06/identity/authenticationmethod/windows http://schemas.microsoft.com/ws/2008/06/identity/claims/windowsaccountname=XYZ http://schemas.xmlsoap.org/ws/2005/05/identity/claims/[email protected] http://schemas.xmlsoap.org/ws/2005/05/identity/claims/[email protected] http://schemas.microsoft.com/accesscontrolservice/2010/07/claims/identityprovider=http://fs.svc.xyz.com/adfs/services/trust Audience=http://localhost/x.y.z ExpiresOn=1346402225 Issuer=https://x-y-z.accesscontrol.windows.net/ HMACSHA256=oDCeEDDAWEC8x+yBnTaCLnzp4L6jI0Z/xNK95PdZTts= The HMAC hash lets you validate the token to ensure it hasn’t been tampered with. You'll need the token signing key from ACS, then you can re-sign the token and compare hashes. There's a full implementation of an SWT parser and validator here: How To Request SWT Token From ACS And How To Validate It At The REST WCF Service Hosted In Windows Azure, and a cut-down claim inspector on my github code gallery: ACS Claim Inspector. Interestingly, ACS lets you have a value for your logged-in page which has no relation to the realm for authentication, so you can put this code into a generic claim inspector page, and set that to be your logged-in page for any relying party where you want to check what's being sent through. Particularly handy with ADFS, when you're modifying the claims provided, and want to quickly see the results.

  Read the article

• Stepping outside Visual Studio IDE [Part 1 of 2] with Eclipse

  - by mbcrump

  “If you're walking down the right path and you're willing to keep walking, eventually you'll make progress." – Barack Obama In my quest to become a better programmer, I’ve decided to start the process of learning Java. I will be primary using the Eclipse Language IDE. I will not bore you with the history just what is needed for a .NET developer to get up and running. I will provide links, screenshots and a few brief code tutorials. Links to documentation. The Official Eclipse FAQ’s Links to binaries. Eclipse IDE for Java EE Developers the Galileo Package (based on Eclipse 3.5 SR2)  Sun Developer Network – Java Eclipse officially recommends Java version 5 (also known as 1.5), although many Eclipse users use the newer version 6 (1.6). That's it, nothing more is required except to compile and run java. Installation Unzip the Eclipse IDE for Java EE Developers and double click the file named Eclipse.exe. You will probably want to create a link for it on your desktop. Once, it’s installed and launched you will have to select a workspace. Just accept the defaults and you will see the following: Lets go ahead and write a simple program. To write a "Hello World" program follow these steps: Start Eclipse. Create a new Java Project: File->New->Project. Select "Java" in the category list. Select "Java Project" in the project list. Click "Next". Enter a project name into the Project name field, for example, "HW Project". Click "Finish" Allow it to open the Java perspective Create a new Java class: Click the "Create a Java Class" button in the toolbar. (This is the icon below "Run" and "Window" with a tooltip that says "New Java Class.") Enter "HW" into the Name field. Click the checkbox indicating that you would like Eclipse to create a "public static void main(String[] args)" method. Click "Finish". A Java editor for HW.java will open. In the main method enter the following line.      System.out.println("This is my first java program and btw Hello World"); Save using ctrl-s. This automatically compiles HW.java. Click the "Run" button in the toolbar (looks like a VCR play button). You will be prompted to create a Launch configuration. Select "Java Application" and click "New". Click "Run" to run the Hello World program. The console will open and display "This is my first java program and btw Hello World". You now have your first java program, lets go ahead and make an applet. Since you already have the HW.java open, click inside the window and remove all code. Now copy/paste the following code snippet. Java Code Snippet for an applet. 1: import java.applet.Applet; 2: import java.awt.Graphics; 3: import java.awt.Color; 4:  5: @SuppressWarnings("serial") 6: public class HelloWorld extends Applet{ 7:  8: String text = "I'm a simple applet"; 9:  10: public void init() { 11: text = "I'm a simple applet"; 12: setBackground(Color.GREEN); 13: } 14:  15: public void start() { 16: System.out.println("starting..."); 17: } 18:  19: public void stop() { 20: System.out.println("stopping..."); 21: } 22:  23: public void destroy() { 24: System.out.println("preparing to unload..."); 25: } 26:  27: public void paint(Graphics g){ 28: System.out.println("Paint"); 29: g.setColor(Color.blue); 30: g.drawRect(0, 0, 31: getSize().width -1, 32: getSize().height -1); 33: g.setColor(Color.black); 34: g.drawString(text, 15, 25); 35: } 36: } The Eclipse IDE should look like Click "Run" to run the Hello World applet. Now, lets test our new java applet. So, navigate over to your workspace for example: “C:\Users\mbcrump\workspace\HW Project\bin” and you should see 2 files. HW.class java.policy.applet Create a HTML page with the following code: 1: <HTML> 2: <BODY> 3: <APPLET CODE=HW.class WIDTH=200 HEIGHT=100> 4: </APPLET> 5: </BODY> 6: </HTML> Open, the HTML page in Firefox or IE and you will see your applet running.  I hope this brief look at the Eclipse IDE helps someone get acquainted with Java Development. Even if your full time gig is with .NET, it will not hurt to have another language in your tool belt. As always, I welcome any suggestions or comments.

  Read the article

• WSS 3.0 to SharePoint 2010: Tips for delaying the Visual Upgrade

  - by Kelly Jones

  My most recent project has been to migrate a bunch of sites from WSS 3.0 (SharePoint 2007) to SharePoint Server 2010.  The users are currently working with WSS 3.0 and Office 2003, so the new ribbon based UI in 2010 will be completely new.  My client wants to avoid the new SharePoint 2010 look and feel until they’ve had time to train their users, so we’ve been testing the upgrades by keeping them with the 2007 user interface. Permission to perform the Visual Upgrade One of the first things we noticed was the default permissions for who was allowed to switch the UI from 2007 to 2010.  By default, site collection administrators and site owners can do this.  Since we wanted to more tightly control the timing of the new UI, I added a few lines to the PowerShell script that we are using to perform the migration.  This script creates the web application, sets the User Policy, and then does a Mount-SPDatabase to attach the old 2007 content database to the 2010 farm.  I added the following steps after the Mount-SPDatabase step: #Remove the visual upgrade option for site owners # it remains for Site Collection administrators foreach ($sc in $WebApp.Sites){ foreach ($web in $sc.AllWebs){ #Visual Upgrade permissions for the site/subsite (web) $web.UIversionConfigurationEnabled = $false; $web.Update(); } } These script steps loop through each Site Collection in a particular web application ($WebApp) and then it loops through each subsite ($web) in the Site Collection ($sc) and disables the Site Owner’s permission to perform the Visual Upgrade. This is equivalent to going to the Site Collection administrator settings page –> Visual Upgrade and selecting “Hide Visual Upgrade”. Since only IT people have Site Collection administrator privileges, this will allow IT to control the timing of the new 2010 UI rollout. Newly created subsites Our next issue was brought to our attention by SharePoint Joel’s blog post last week (http://www.sharepointjoel.com/Lists/Posts/Post.aspx?ID=524 ).  In it, he lists some updates about the 2010 upgrade, and his fourth point was one that I hadn’t seen yet: 4. If a 2007 upgraded site has not been visually upgraded, the sites created underneath it will look like 2010 sites – While this is something I’ve been aware of, I think many don’t realize how this impacts common look and feel for master pages, and how it impacts good navigation and UI. As well depending on your patch level you may see hanging behavior in the list picker. The site and list creation Silverlight control in Internet Explorer is looking for resources that don’t exist in the galleries in the 2007 site, and hence it continues to spin and spin and eventually time out. The work around is to upgrade to SP1, or use Chrome or Firefox which won’t attempt to render the Silverlight control. When the root site collection is a 2007 site and has it’s set of galleries and the children are 2010 sites there is some strange behavior linked to the way that the galleries work and pull from the parent. Our production SharePoint 2010 Farm has SP1 installed, as well as the December 2011 Cumulative Update, so I think the “hanging behavior” he mentions won’t affect us. However, since we want to control the roll out of the UI, we are concerned that new subsites will have the 2010 look and feel, no matter what the parent site has. Ok, time to dust off my developer skills. I first looked into using feature stapling, but I couldn’t get that to work (although I’m pretty sure I had everything wired up correctly).  Then I stumbled upon SharePoint 2010’s web events – a great way to handle this. Using Visual Studio 2010, I created a new SharePoint project and added a Web Event Receiver: In the Event Receiver class, I used the WebProvisioned method to check if the parent site is a 2007 site (UIVersion = 3), and if so, then set the newly created site to 2007:   /// <summary> /// A site was provisioned. /// </summary> public override void WebProvisioned(SPWebEventProperties properties) { base.WebProvisioned(properties);   try { SPWeb curweb = properties.Web;   if (curweb.ParentWeb != null) {   //check if the parent website has the 2007 look and feel if (curweb.ParentWeb.UIVersion == 3) { //since parent site has 2007 look and feel // we'll apply that look and feel to the current web curweb.UIVersion = 3; curweb.Update(); } } } catch (Exception) { //TODO: Add logging for errors } }   This event is part of a Feature that is scoped to the Site Level (Site Collection).  I added a couple of lines to my migration PowerShell script to activate the Feature for any site collections that we migrate. Plan Going Forward The plan going forward is to perform the visual upgrade after the users for a particular site collection have gone through 2010 training. If we need to do several site collections at once, we’ll use a PowerShell script to loop through each site collection to update the sites to 2010.  If it’s just one or two, we’ll be using the “Update All Sites” button on the Visual Upgrade page for Site Collection Administrators. The custom code for newly created sites won’t need to be changed, since it relies on the UI version of the parent site.  If the parent is 2010, then the new site will look 2010.

  Read the article

• What's My Problem? What's Your Problem?

  - by Jacek Ziabicki

  Software installers are not made for building demo environments. I can say this much after 12 years (on and off) of supporting my fellow sales consultants with environments for software demonstrations. When we release software, we include installation programs and procedures that are designed for use by our clients – to build a production environment and a limited number of testing, training and development environments. Different Objectives Your priorities when building an environment for client use vs. building a demo environment are very different. In a production environment, security, stability, and performance concerns are paramount. These environments are built on a specific server and rarely, if ever, moved to a different server or different network address. There is typically just one application running on a particular server (physical or virtual). Once built, the environment will be used for months or years at a time. Because of security considerations, the installation program wants to make these environments very specific to the organization using the software and the use case, encoding a fully qualified name of the server, or even the IP address on the network, in the configuration. So you either go through the installation procedure for each environment, or learn how to clone and reconfigure the software as a separate instance to build all your non-production environments. This may not matter much if the installation is as simple as clicking on the Setup program. But for enterprise applications, you have a number of configuration settings that you need to get just right – so whether you are installing from scratch or reconfiguring an existing installation, this requires both time and expertise in the particular piece of software. If you need a setup of several applications that are integrated to talk to one another, it is a whole new level of complexity. Now you need the expertise in all of the applications involved (plus the supporting technology products), and in addition to making each application work, you also have to configure the integration endpoints. Each application needs the URLs and credentials to call the integration layer, and the integration must be able to call each application. Then you have to make sure that each app has the right data so a business process initiated in one application can continue in the next. And, you will need to check that each application has the correct version and patch level for the integration to work. When building demo environments, your #1 concern is agility. If you can get away with a small number of long-running environments, you are lucky. More likely, you may get a request for a dedicated environment for a demonstration that is two weeks away: how quickly can you make this available so we still have the time to build the client-specific data? We are running a hands-on workshop next month, and we’ll need 15 instances of application X environment so each student can have a separate server for the exercises. We cannot connect to our data center from the client site, the client’s security policy won’t allow our VPN to go through – so we need a portable environment that we can bring with us. Our consultants need to be able to work at the hotel, airport, and the airplane, so we really want an environment that can run on a laptop. The client will need two playpen environments running in the cloud, accessible from their network, for a series of workshops that start two weeks from now. We have seen all of these scenarios and more. Here you would be much better served by a generic installation that would be easy to clone. Welcome to the Wonder Machine The reason I started this blog is to share a particular design of a demo environment, a special way to install software, that can address the above requirements, even for integrated setups. This design was created by a team at Oracle Utilities Global Business Unit, and we are using this setup for most of our demo environments. In a bout of modesty we called it the Wonder Machine. Over the next few posts – think of it as a novel in parts – I will tell you about the big idea, how it was implemented and what you can do with it. After we have laid down the groundwork, I would like to share some tips and tricks for users of our Wonder Machine implementation, as well as things I am learning about building portable, cloneable environments. The Wonder Machine is by no means a closed specification, it is under active development! I am hoping this blog will be of interest to two groups of readers – the users of the Wonder Machine we have built at Oracle Utilities, who want to get the most out of their demo environments and be able to reconfigure it to their needs – and to people who need to build environments for demonstration, testing, training, development and would like to make them cloneable and portable to maximize the reuse of their effort. Surely we are not the only ones facing this problem? If you can think of a better way to solve it, or if you can help us improve on our concept, I will appreciate your comments!

  Read the article

• DirectoryServicesCOMException when working with System.DirectoryServices.AccountManagement

  - by antik

  I'm attempting to determine whether a user is a member of a given group using System.DirectoryServices.AccountManagment. I'm doing this inside a SharePoint WebPart in SharePoint 2007 on a 64-bit system. Project targets .NET 3.5 Impersonation is enabled in the web.config. The IIS Site in question is using an IIS App Pool with a domain user configured as the identity. I am able to instantiate a PrincipalContext as such: PrincipalContext pc = new PrincipalContext(ContextType.Domain) Next, I try to grab a principal: using (PrincipalContext pc = new PrincipalContext(ContextType.Domain)) { GroupPrincipal group = GroupPrincipal.FindByIdentity(pc, "MYDOMAIN\somegroup"); // snip: exception thrown by line above. } Both the above and UserPrincipal.FindByIdentity with a user SAM throw a DirectoryServicesCOMException: "Logon failure: Unknown user name or bad password" I've tried passing in a complete SAMAccountName to either FindByIdentity (in the form of MYDOMAIN\username) or just the username with no change in behavior. I've tried executing the code with other credentials using both the HostingEnvironment.Impersonate and SPSecurity.RunWithElevatedPrivileges approaches and also experience the same result. I've also tried instantiating my context with the domain name in place: Principal Context pc = new PrincipalContext(ContextType.Domain, "MYDOMAIN"); This throws a PrincipalServerDownException: "The server could not be contacted." I'm working on a reasonably hardened server. I did not lock the system down so I am unsure exactly what has been done to it. If there are credentials I need to allocate to my pool identity's user or in the domain security policy in order for these to work, I can configure the domain accordingly. Are there any settings that would be preventing my code from running? Am I missing something in the code itself? Is this just not possible in a SharePoint web? EDIT: Given further testing, my code functions correctly when tested in a Console application targeting .NET 4.0. I targeted a different framework because I didn't have AccountManagement available to me in the console app when targeting .NET 3.5 for some reason. using (PrincipalContext pc = new PrincipalContext(ContextType.Domain)) using (UserPrincipal adUser = UserPrincipal.FindByIdentity(pc, "MYDOMAIN\joe.user")) using (GroupPrincipal adGroup = GroupPrincipal.FindByIdentity(pc, "MYDOMAIN\user group")) { if (adUser.IsMemberOf(adGroup)) { Console.WriteLine("User is a member!"); } else { Console.WriteLine("User is NOT a member."); } } What varies in my SharePoint environment that might prohibit this function from executing?

  Read the article

• Winforms TabControl causing spurious Paint events for UserControl

  - by Tom Bushell

  For our project, we've written a WinForms UserControl for graphing. We're seeing some strange behavior when our control is sited in a TabControl - our control continuously fires Paint events, even when there is absolutely no activity by the user. We only see this in the TabControl. When we site our control in other containers such as Forms or Splitters, Paint is only fired when you'd expect e.g. when the control is first displayed, etc. Can anyone suggest why this might be happening? Here's a stack trace from a breakpoint in our control's Paint handler, if that's any help. OverlordFrontEnd.exe!OverlordFrontEnd.MainForm.graphControl_Paint(object sender = BI_BaseGraphXY.BaseGraphXY}, System.Windows.Forms.PaintEventArgs e = {ClipRectangle = {X=0,Y=0,Width=1031,Height=408}}) Line 422 C# System.Windows.Forms.dll!System.Windows.Forms.Control.OnPaint(System.Windows.Forms.PaintEventArgs e) + 0x73 bytes BI_AppCore.dll!BI_BaseGraphXY.BaseGraphXY.OnPaint(System.Windows.Forms.PaintEventArgs e = {ClipRectangle = {X=0,Y=0,Width=1031,Height=408}}) Line 377 + 0xb bytes C# System.Windows.Forms.dll!System.Windows.Forms.Control.PaintTransparentBackground(System.Windows.Forms.PaintEventArgs e, System.Drawing.Rectangle rectangle, System.Drawing.Region transparentRegion = null) + 0x16c bytes System.Windows.Forms.dll!System.Windows.Forms.Control.PaintBackground(System.Windows.Forms.PaintEventArgs e = {ClipRectangle = {X=0,Y=0,Width=1029,Height=406}}, System.Drawing.Rectangle rectangle, System.Drawing.Color backColor, System.Drawing.Point scrollOffset) + 0xbc bytes System.Windows.Forms.dll!System.Windows.Forms.Control.PaintBackground(System.Windows.Forms.PaintEventArgs e, System.Drawing.Rectangle rectangle) + 0x63 bytes System.Windows.Forms.dll!System.Windows.Forms.Control.OnPaintBackground(System.Windows.Forms.PaintEventArgs pevent) + 0x59 bytes System.Windows.Forms.dll!System.Windows.Forms.Control.PaintWithErrorHandling(System.Windows.Forms.PaintEventArgs e = {ClipRectangle = {X=0,Y=0,Width=1029,Height=406}}, short layer, bool disposeEventArgs = false) + 0x74 bytes System.Windows.Forms.dll!System.Windows.Forms.Control.WmPaint(ref System.Windows.Forms.Message m) + 0x1ba bytes System.Windows.Forms.dll!System.Windows.Forms.Control.WndProc(ref System.Windows.Forms.Message m) + 0x33e bytes System.Windows.Forms.dll!System.Windows.Forms.Control.ControlNativeWindow.OnMessage(ref System.Windows.Forms.Message m) + 0x10 bytes System.Windows.Forms.dll!System.Windows.Forms.Control.ControlNativeWindow.WndProc(ref System.Windows.Forms.Message m) + 0x31 bytes System.Windows.Forms.dll!System.Windows.Forms.NativeWindow.Callback(System.IntPtr hWnd, int msg = 15, System.IntPtr wparam, System.IntPtr lparam) + 0x5a bytes [Native to Managed Transition] [Managed to Native Transition] System.Windows.Forms.dll!System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(int dwComponentID, int reason = -1, int pvLoopData = 0) + 0x24e bytes System.Windows.Forms.dll!System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(int reason = -1, System.Windows.Forms.ApplicationContext context = {Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.WinFormsAppContext}) + 0x177 bytes System.Windows.Forms.dll!System.Windows.Forms.Application.ThreadContext.RunMessageLoop(int reason, System.Windows.Forms.ApplicationContext context) + 0x61 bytes System.Windows.Forms.dll!System.Windows.Forms.Application.Run(System.Windows.Forms.ApplicationContext context) + 0x18 bytes Microsoft.VisualBasic.dll!Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun() + 0x81 bytes Microsoft.VisualBasic.dll!Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel() + 0xef bytes Microsoft.VisualBasic.dll!Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(string[] commandLine) + 0x2c0 bytes OverlordFrontEnd.exe!OverlordFrontEnd.Program.Main() Line 36 + 0x10 bytes C# [Native to Managed Transition] [Managed to Native Transition] mscorlib.dll!System.AppDomain.ExecuteAssembly(string assemblyFile, System.Security.Policy.Evidence assemblySecurity, string[] args) + 0x3a bytes Microsoft.VisualStudio.HostingProcess.Utilities.dll!Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly() + 0x2b bytes mscorlib.dll!System.Threading.ThreadHelper.ThreadStart_Context(object state) + 0x66 bytes mscorlib.dll!System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext executionContext, System.Threading.ContextCallback callback, object state) + 0x6f bytes mscorlib.dll!System.Threading.ThreadHelper.ThreadStart() + 0x44 bytes

  Read the article

• Cannot run Android "Camera Preview" sample

  - by noisesolo

  The sample I'm referring to is: CameraPreview. The program simply force closes upon start up. I've also tried other camera demos that have the same problem. I'm trying to run the samples on my Nexus One and the emulator with the same problem on both. I'm not even sure if the emulator should be able to run them or not. Based on LogCat, the error is: 06-08 16:39:10.483: ERROR/AndroidRuntime(6726): Uncaught handler: thread main exiting due to uncaught exception 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): java.lang.RuntimeException: Fail to connect to camera service 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at android.hardware.Camera.native_setup(Native Method) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at android.hardware.Camera.<init>(Camera.java:110) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at android.hardware.Camera.open(Camera.java:90) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at com.example.android.apis.graphics.Preview.surfaceCreated(CameraPreview.java:69) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at android.view.SurfaceView.updateWindow(SurfaceView.java:454) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at android.view.SurfaceView.dispatchDraw(SurfaceView.java:287) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at android.view.ViewGroup.drawChild(ViewGroup.java:1529) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at android.view.ViewGroup.dispatchDraw(ViewGroup.java:1258) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at android.view.View.draw(View.java:6557) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at android.widget.FrameLayout.draw(FrameLayout.java:352) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at android.view.ViewGroup.drawChild(ViewGroup.java:1531) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at android.view.ViewGroup.dispatchDraw(ViewGroup.java:1258) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at android.view.View.draw(View.java:6557) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at android.widget.FrameLayout.draw(FrameLayout.java:352) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at com.android.internal.policy.impl.PhoneWindow$DecorView.draw(PhoneWindow.java:1830) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at android.view.ViewRoot.draw(ViewRoot.java:1349) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at android.view.ViewRoot.performTraversals(ViewRoot.java:1114) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at android.view.ViewRoot.handleMessage(ViewRoot.java:1633) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at android.os.Handler.dispatchMessage(Handler.java:99) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at android.os.Looper.loop(Looper.java:123) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at android.app.ActivityThread.main(ActivityThread.java:4363) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at java.lang.reflect.Method.invokeNative(Native Method) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at java.lang.reflect.Method.invoke(Method.java:521) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:860) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:618) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at dalvik.system.NativeStart.main(Native Method) All I did to try out the sample was create a new Android 2.1update1 Project, named everything according to the supplied Java file, copied the Java file from the URL to the CameraPreview.java file, then run it. Am I supposed to do anything else? Any help would be appreciated. Thanks in advance.

  Read the article

• MVVM Light Toolkit throws an System.IO.FileLoadException

  - by joebeazelman

  I'm running VS 2010 along with Expression Blend 4 beta. I created a MVVM Light project from the supplied templates and I get a System.IO.FileLoadException when I try to view the MainWindow.Xaml in VS 2010 designer window. The template already references System.Windows.Interactivity. Here are the details of the exception: System.IO.FileLoadException Could not load file or assembly 'System.Windows.Interactivity, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. Operation is not supported. (Exception from HRESULT: 0x80131515) at System.Reflection.RuntimeAssembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) at System.Reflection.RuntimeAssembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection, Boolean suppressSecurityChecks) at System.Reflection.Assembly.Load(AssemblyName assemblyRef) at MS.Internal.Package.VSIsolationProviderService.RemoteReferenceProxy.VsReflectionResolver.GetRuntimeAssembly(Assembly reflectionAssembly) at Microsoft.Windows.Design.Metadata.ReflectionMetadataContext.CachingReflectionResolver.GetRuntimeAssembly(Assembly reflectionAssembly) at Microsoft.Windows.Design.Metadata.ReflectionMetadataContext.Microsoft.Windows.Design.Metadata.IReflectionResolver.GetRuntimeAssembly(Assembly reflectionAssembly) at MS.Internal.Metadata.ClrAssembly.GetRuntimeMetadata(Object reflectionMetadata) at Microsoft.Windows.Design.Metadata.AttributeTableContainer.d_c.MoveNext() at Microsoft.Windows.Design.Metadata.AttributeTableContainer.GetAttributes(Assembly assembly, Type attributeType, Func`2 reflectionMapper) at MS.Internal.Metadata.ClrAssembly.GetAttributes(ITypeMetadata attributeType) at MS.Internal.Design.Metadata.Xaml.XamlAssembly.get_XmlNamespaceCompatibilityMappings() at Microsoft.Windows.Design.Metadata.Xaml.XamlExtensionImplementations.GetXmlNamespaceCompatibilityMappings(IAssemblyMetadata sourceAssembly) at Microsoft.Windows.Design.Metadata.Xaml.XamlExtensions.GetXmlNamespaceCompatibilityMappings(IAssemblyMetadata source) at MS.Internal.Design.Metadata.ReflectionProjectNode.BuildSubsumption() at MS.Internal.Design.Metadata.ReflectionProjectNode.SubsumingNamespace(Identifier identifier) at MS.Internal.Design.Markup.XmlElement.BuildScope(PrefixScope parentScope, IParseContext context) at MS.Internal.Design.Markup.XmlElement.ConvertToXaml(XamlElement parent, PrefixScope parentScope, IParseContext context, IMarkupSourceProvider provider) at MS.Internal.Design.DocumentModel.DocumentTrees.Markup.XamlSourceDocument.FullParse(Boolean convertToXamlWithErrors) at MS.Internal.Design.DocumentModel.DocumentTrees.Markup.XamlSourceDocument.get_RootItem() at Microsoft.Windows.Design.DocumentModel.Trees.ModifiableDocumentTree.get_ModifiableRootItem() at Microsoft.Windows.Design.DocumentModel.MarkupDocumentManagerBase.get_LoadState() at MS.Internal.Host.PersistenceSubsystem.Load() at MS.Internal.Host.Designer.Load() at MS.Internal.Designer.VSDesigner.Load() at MS.Internal.Designer.VSIsolatedDesigner.VSIsolatedView.Load() at MS.Internal.Designer.VSIsolatedDesigner.VSIsolatedDesignerFactory.Load(IsolatedView view) at MS.Internal.Host.Isolation.IsolatedDesigner.BootstrapProxy.LoadDesigner(IsolatedDesignerFactory factory, IsolatedView view) at MS.Internal.Host.Isolation.IsolatedDesigner.BootstrapProxy.LoadDesigner(IsolatedDesignerFactory factory, IsolatedView view) at MS.Internal.Host.Isolation.IsolatedDesigner.Load() at MS.Internal.Designer.DesignerPane.LoadDesignerView() System.NotSupportedException An attempt was made to load an assembly from a network location which would have caused the assembly to be sandboxed in previous versions of the .NET Framework. This release of the .NET Framework does not enable CAS policy by default, so this load may be dangerous. If this load is not intended to sandbox the assembly, please enable the loadFromRemoteSources switch. See http://go.microsoft.com/fwlink/?LinkId=155569 for more information.

  Read the article

• Resizing QT's QTextEdit to Match Text Height: maximumViewportSize()

  - by Aaron

  I am trying to use a QTextEdit widget inside of a form containing several QT widgets. The form itself sits inside a QScrollArea that is the central widget for a window. My intent is that any necessary scrolling will take place in the main QScrollArea (rather than inside any widgets), and any widgets inside will automatically resize their height to hold their contents. I have tried to implement the automatic resizing of height with a QTextEdit, but have run into an odd issue. I created a sub-class of QTextEdit and reimplemented sizeHint() like this: QSize OperationEditor::sizeHint() const { QSize sizehint = QTextBrowser::sizeHint(); sizehint.setHeight(this->fitted_height); return sizehint; } this-fitted_height is kept up-to-date via this slot that is wired to the QTextEdit's "contentsChanged()" signal: void OperationEditor::fitHeightToDocument() { this->document()->setTextWidth(this->viewport()->width()); QSize document_size(this->document()->size().toSize()); this->fitted_height = document_size.height(); this->updateGeometry(); } The size policy of the QTextEdit sub-class is: this->setSizePolicy(QSizePolicy::MinimumExpanding, QSizePolicy::Preferred); I took this approach after reading this post. Here is my problem: As the QTextEdit gradually resizes to fill the window, it stops getting larger and starts scrolling within the QTextEdit, no matter what height is returned from sizeHint(). If I initially have sizeHint() return some large constant number, then the QTextEdit is very big and is contained nicely within the outer QScrollArea, as one would expect. However, if sizeHint gradually adjusts the size of the QTextEdit rather than just making it really big to start, then it tops out when it fills the current window and starts scrolling instead of growing. I have traced this problem to be that, no matter what my sizeHint() returns, it will never resize the QTextEdit larger than the value returned from maximumViewportSize(), which is inherited from QAbstractScrollArea. Note that this is not the same number as viewport()-maximumSize(). I am unable to figure out how to set that value. Looking at QT's source code, maximumViewportSize() is returning "the size of the viewport as if the scroll bars had no valid scrolling range." This value is basically computed as the current size of the widget minus (2 * frameWidth + margins) plus any scrollbar widths/heights. This does not make a lot of sense to me, and it's not clear to me why that number would be used anywhere in a way that supercede's the sub-class's sizeHint() implementation. Also, it does seem odd that the single "frameWidth" integer is used in computing both the width and the height. Can anyone please shed some light on this? I suspect that my poor understanding of QT's layout engine is to blame here.

  Read the article

• How to use Bouncy Castle lightweight API with AES and PBE

  - by Adrian

  I have a block of ciphertext that was created using the JCE algorithim "PBEWithSHA256And256BitAES-CBC-BC". The provider is BouncyCastle. What I'd like to do it decrypt this ciphertext using the BouncyCastle lightweight API. I don't want to use JCE because that requires installing the Unlimited Strength Jurisdiction Policy Files. Documentation seems to be thin on the ground when it comes to using BC with PBE and AES. Here's what I have so far. The decryption code runs without exception but returns rubbish. The encryption code, String password = "qwerty"; String plainText = "hello world"; byte[] salt = generateSalt(); byte[] cipherText = encrypt(plainText, password.toCharArray(), salt); private static byte[] generateSalt() throws NoSuchAlgorithmException { byte salt[] = new byte[8]; SecureRandom saltGen = SecureRandom.getInstance("SHA1PRNG"); saltGen.nextBytes(salt); return salt; } private static byte[] encrypt(String plainText, char[] password, byte[] salt) throws NoSuchAlgorithmException, InvalidKeySpecException, NoSuchPaddingException, InvalidKeyException, InvalidAlgorithmParameterException, IllegalBlockSizeException, BadPaddingException { Security.addProvider(new BouncyCastleProvider()); PBEParameterSpec pbeParamSpec = new PBEParameterSpec(salt, 20); PBEKeySpec pbeKeySpec = new PBEKeySpec(password); SecretKeyFactory keyFac = SecretKeyFactory.getInstance("PBEWithSHA256And256BitAES-CBC-BC"); SecretKey pbeKey = keyFac.generateSecret(pbeKeySpec); Cipher encryptionCipher = Cipher.getInstance("PBEWithSHA256And256BitAES-CBC-BC"); encryptionCipher.init(Cipher.ENCRYPT_MODE, pbeKey, pbeParamSpec); return encryptionCipher.doFinal(plainText.getBytes()); } The decryption code, byte[] decryptedText = decrypt(cipherText, password.getBytes(), salt); private static byte[] decrypt(byte[] cipherText, byte[] password, byte[] salt) throws DataLengthException, IllegalStateException, InvalidCipherTextException, InvalidKeyException, NoSuchAlgorithmException, NoSuchPaddingException, IllegalBlockSizeException, BadPaddingException { BlockCipher engine = new AESEngine(); CBCBlockCipher cipher = new CBCBlockCipher(engine); PKCS5S1ParametersGenerator keyGenerator = new PKCS5S1ParametersGenerator(new SHA256Digest()); keyGenerator.init(password, salt, 20); CipherParameters keyParams = keyGenerator.generateDerivedParameters(256); cipher.init(false, keyParams); byte[] decryptedBytes = new byte[cipherText.length]; int numBytesCopied = cipher.processBlock(cipherText, 0, decryptedBytes, 0); return decryptedBytes; }

  Read the article

• SQL 2008 R2 login/network issue

  - by martinjd

  I have a Windows Server 2008 R2 new clean install , not a VM, that I have added to a Windows Server 2003 based domain using my account which has domain admin rights. The domain functional level is 2003. I performed a clean install of SQL Server 2008 R2 using my account which has domain admin rights. The installation completed without any errors. I logged into SSMS locally and attempted to add another domain account by clicking Search, Advanced and finding the user in the domain. When I return to the "Dialog - New" window and click OK I receive the following error: Create failed for Login 'Domain\User'. (Microsoft.SqlServer.Smo) An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo) Windows NT user or group 'Domain\User' not found. Check the name again. (Microsoft SQL Server, Error: 15401) I have verified that the firewall is off, tried adding a different domain user, tried using SA to add a user, installed the hotfix for KB 976494 and verified that the Local Security Policy for Domain Member: Digitally encrypt or sign secure channel Domain Member: Digitally encrypt secure channel Domain Member: Digitally sign secure channel are disabled none of which have made a difference. I can RDP to a Server 2003 server running SQL 2008 and add the same domain user without issue. Also if I try to connect with SSMS to the sql server from another system on the domain using my account I get the following error: Login failed. The login is from an untrusted domain and cannot be used with Windows authentication. (Microsoft SQL Server, Error: 18452) and on the database server I see the following in the security event log: An account failed to log on. Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: myUserName Account Domain: MYDOMAIN Failure Information: Failure Reason: An Error occured during Logon. Status: 0xc000018d Sub Status: 0x0 Process Information: Caller Process ID: 0x0 Caller Process Name: - Network Information: Workstation Name: MYWKS Source Network Address: - Source Port: - Detailed Authentication Information: Logon Process: NtLmSsp Authentication Package: NTLM Transited Services: - Package Name (NTLM only): - Key Length: 0 I am sure that the "NULL SID" has some significant meaning but have no idea at this point what the issue could be.

  Read the article

• Android 2.1 GoogleMaps ItemizedOverlay ConcurrentModificationException

  - by Soumya Simanta

  Hi, I cannot figure out the origin of the ConcurrentModificationException. In my activity I'm calling updateMapOverlay(). I'm also calling updateMapOverlay() inside another Thread (a TimerTask) that is invoked on regular intervals. I'm taking the appropriate locks when invoking updateMapOverlay() from both the threads. Is this problem being caused because I'm invoking updateMapOverlay from inside a non-UI thread (i.e., TimerTask). Has anyone else faced a similar issue ? private void updateMapOverlay() { this.itemizedOverlay.refreshItems(createOverlayItemsList()); List<Overlay> overlays = mapView.getOverlays(); overlays.clear(); overlays.add(cotItemizedOverlay); this.mapview.invalidate(); } Thanks. Exception: W/dalvikvm(10641): threadid=3: thread exiting with uncaught exception (group=0x4001b180) E/AndroidRuntime(10641): Uncaught handler: thread main exiting due to uncaught exception E/AndroidRuntime(10641): java.util.ConcurrentModificationException E/AndroidRuntime(10641): at java.util.AbstractList$SimpleListIterator.next(AbstractList.java:64) E/AndroidRuntime(10641): at com.google.android.maps.OverlayBundle.draw(OverlayBundle.java:41) E/AndroidRuntime(10641): at com.google.android.maps.MapView.onDraw(MapView.java:494) E/AndroidRuntime(10641): at android.view.View.draw(View.java:6535) E/AndroidRuntime(10641): at android.view.ViewGroup.drawChild(ViewGroup.java:1531) E/AndroidRuntime(10641): at android.view.ViewGroup.dispatchDraw(ViewGroup.java:1258) E/AndroidRuntime(10641): at android.view.ViewGroup.drawChild(ViewGroup.java:1529) E/AndroidRuntime(10641): at android.view.ViewGroup.dispatchDraw(ViewGroup.java:1258) E/AndroidRuntime(10641): at android.view.View.draw(View.java:6538) E/AndroidRuntime(10641): at android.widget.FrameLayout.draw(FrameLayout.java:352) E/AndroidRuntime(10641): at android.view.ViewGroup.drawChild(ViewGroup.java:1531) E/AndroidRuntime(10641): at android.view.ViewGroup.dispatchDraw(ViewGroup.java:1258) E/AndroidRuntime(10641): at android.view.ViewGroup.drawChild(ViewGroup.java:1529) E/AndroidRuntime(10641): at android.view.ViewGroup.dispatchDraw(ViewGroup.java:1258) E/AndroidRuntime(10641): at android.view.View.draw(View.java:6538) E/AndroidRuntime(10641): at android.widget.FrameLayout.draw(FrameLayout.java:352) E/AndroidRuntime(10641): at com.android.internal.policy.impl.PhoneWindow$DecorView.draw(PhoneWindow.java:1830) E/AndroidRuntime(10641): at android.view.ViewRoot.draw(ViewRoot.java:1349) E/AndroidRuntime(10641): at android.view.ViewRoot.performTraversals(ViewRoot.java:1114) E/AndroidRuntime(10641): at android.view.ViewRoot.handleMessage(ViewRoot.java:1633) E/AndroidRuntime(10641): at android.os.Handler.dispatchMessage(Handler.java:99) E/AndroidRuntime(10641): at android.os.Looper.loop(Looper.java:123) E/AndroidRuntime(10641): at android.app.ActivityThread.main(ActivityThread.java:4363) E/AndroidRuntime(10641): at java.lang.reflect.Method.invokeNative(Native Method) E/AndroidRuntime(10641): at java.lang.reflect.Method.invoke(Method.java:521) E/AndroidRuntime(10641): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:860) E/AndroidRuntime(10641): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:618) E/AndroidRuntime(10641): at dalvik.system.NativeStart.main(Native Method) I/Process ( 95): Sending signal. PID: 10641 SIG: 3

  Read the article

• ReportBuilder.application fails on my PC - but works on localhost

  - by JayTee

  We're running SQL 2005 on Win2K3 server and are using SSRS. Here's the situation: I can run Report Builder from localhost My coworker can run Report Builder on his Vista computer Another coworker can run Report Builder on his XP SP3 computer (IE7) I can NOT run Report Builder on my XP SP3 computer (IE7) I'm told that it could be anything from an errant registry entry to a group policy problem. Here is what I've tried: Put the site into "Trusted Sites" with "low" security re-install .NET create a new local user account and attempt to run it The results? Every single time, I get a dialog box: "Application cannot be started. Contact the application vendor" I click the details button and get this: PLATFORM VERSION INFO Windows : 5.1.2600.196608 (Win32NT) Common Language Runtime : 2.0.50727.3607 System.Deployment.dll : 2.0.50727.3053 (netfxsp.050727-3000) mscorwks.dll : 2.0.50727.3607 (GDR.050727-3600) dfdll.dll : 2.0.50727.3053 (netfxsp.050727-3000) dfshim.dll : 2.0.50727.3053 (netfxsp.050727-3000) SOURCES Deployment url : http://www.example.com/ReportServer/ReportBuilder/ReportBuilder.application Server : Microsoft-IIS/6.0 X-Powered-By : ASP.NET X-AspNet-Version: 2.0.50727 IDENTITIES Deployment Identity : ReportBuilder.application, Version=9.0.3042.0, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=msil APPLICATION SUMMARY * Online only application. * Trust url parameter is set. ERROR SUMMARY Below is a summary of the errors, details of these errors are listed later in the log. * Activation of http://www.example.com/ReportServer/ReportBuilder/ReportBuilder.application resulted in exception. Following failure messages were detected: + Value does not fall within the expected range. COMPONENT STORE TRANSACTION FAILURE SUMMARY No transaction error was detected. WARNINGS There were no warnings during this operation. OPERATION PROGRESS STATUS * [4/7/2010 2:53:57 PM] : Activation of http://www.example.com/ReportServer/ReportBuilder/ReportBuilder.application has started. * [4/7/2010 2:53:58 PM] : Processing of deployment manifest has successfully completed. ERROR DETAILS Following errors were detected during this operation. * [4/7/2010 2:53:58 PM] System.ArgumentException - Value does not fall within the expected range. - Source: System.Deployment - Stack trace: at System.Deployment.Application.NativeMethods.CorLaunchApplication(UInt32 hostType, String applicationFullName, Int32 manifestPathsCount, String[] manifestPaths, Int32 activationDataCount, String[] activationData, PROCESS_INFORMATION processInformation) at System.Deployment.Application.ComponentStore.ActivateApplication(DefinitionAppId appId, String activationParameter, Boolean useActivationParameter) at System.Deployment.Application.SubscriptionStore.ActivateApplication(DefinitionAppId appId, String activationParameter, Boolean useActivationParameter) at System.Deployment.Application.ApplicationActivator.Activate(DefinitionAppId appId, AssemblyManifest appManifest, String activationParameter, Boolean useActivationParameter) at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl) at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state) COMPONENT STORE TRANSACTION DETAILS * Transaction at [4/7/2010 2:53:58 PM] + System.Deployment.Internal.Isolation.StoreOperationSetDeploymentMetadata - Status: Set - HRESULT: 0x0 + System.Deployment.Internal.Isolation.StoreTransactionOperationType (27) - HRESULT: 0x0 I'm really at a loss. I'm certain there is something on my PC preventing the application from running - but I just don't know what. Google hasn't been much of a help because most problems are related to the server configuration (which I know is correct since it works on other PCs) Help me, Overflow Kenobi, you're my only hope..

  Read the article

• SSLException: Keystore does not support enabled cipher suites

  - by wurfkeks

  I want to implement a small android application, that works as SSL Server. After lot of problems with the right format of the keystore, I solved this and run into the next one. My keystore file is properly loaded by the KeyStore class. But when I try to open the server socket (socket.accept()) the following error is raised: javax.net.ssl.SSLException: Could not find any key store entries to support the enabled cipher suites. I generated my keystore with this command: keytool -genkey -keystore test.keystore -keyalg RSA -keypass ssltest -storepass ssltest -storetype BKS -provider org.bouncycastle.jce.provider.BouncyCastleProvider -providerpath bcprov.jar with the Unlimited Strength Jurisdiction Policy for Java SE6 applied to my jre6. I got a list of supported ciphers suites by calling socket.getSupportedCipherSuites() that prints a long list with very different combinations. But I don't know how to get a supported key. I also tried the android debug keystore after converting it to BKS format using portecle but get still the same error. Can anyone help and tell how I can generate a key that is compatible with one of the cipher suites? Version Information: targetSDK: 15 tested on emulator running 4.0.3 and real device running 2.3.3 BounceCastle 1.46 portecle 1.7 Code of my test application: public class SSLTestActivity extends Activity implements Runnable { SSLServerSocket mServerSocket; ToggleButton tglBtn; /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); this.tglBtn = (ToggleButton)findViewById(R.id.toggleButton1); tglBtn.setOnCheckedChangeListener(new CompoundButton.OnCheckedChangeListener() { @Override public void onCheckedChanged(CompoundButton buttonView, boolean isChecked) { if (isChecked) { new Thread(SSLTestActivity.this).run(); } else { try { if (mServerSocket != null) mServerSocket.close(); } catch (IOException e) { Log.e("SSLTestActivity", e.toString()); } } } }); } @Override public void run() { try { KeyStore keyStore = KeyStore.getInstance(KeyStore.getDefaultType()); keyStore.load(getAssets().open("test.keystore"), "ssltest".toCharArray()); ServerSocketFactory socketFactory = SSLServerSocketFactory.getDefault(); mServerSocket = (SSLServerSocket) socketFactory.createServerSocket(8080); while (!mServerSocket.isClosed()) { Socket client = mServerSocket.accept(); PrintWriter output = new PrintWriter(client.getOutputStream(), true); output.println("So long, and thanks for all the fish!"); client.close(); } } catch (Exception e) { Log.e("SSLTestActivity", e.toString()); } } }

  Read the article

• GWTAI applet integration in GWT problem

  - by andy

  Hi everybody. I'm working with gwtai to integrate a java applet into my gwt - project. Basic communication from my main application to the applet (such as invoking simple methods that return int or boolean values) works. But the main reason why I need to integrate this applet is, that I need it to connect to another server and receive a answer and pass it to my gwt-application. So there's one basic method in the applet: public String SendAndReceive(String host, int sendPort, int receivePort, String query) that connects to the server, receives an answer and returns this answer as a string. When I now try to invoke this method like this: applet.SendAndReceive("0.0.0.0", 9099, 2000, "show streams;"); I constantly run into following error (full error message at the end): com.google.gwt.core.client.JavaScriptException: (String): Error calling method on NPObject! [plugin exception: java.security.AccessControlException: access denied (java.util.PropertyPermission * read,write)] I couldn't find a solution (for gwtai is a quite uncommon topic), what I found out (and what the Exception let's one assume) is, that there's a security problem - maybe because I'm connecting to another server. I also read something about browser's Single Origin Policy, what would point in the same direction...up to now I have never worked with java applets. So if someone has a solution or a hint I would be very thankful. If more code is helpful I can give. Thanks, Andy the full error message: 21:03:49.864 [ERROR] [follovizergwt] Unable to load module entry point class follovizer.gwt.client.FolloVizerGWT (see associated exception for details) com.google.gwt.core.client.JavaScriptException: (String): Error calling method on NPObject! [plugin exception: java.security.AccessControlException: access denied (java.util.PropertyPermission * read,write)]. at com.google.gwt.dev.shell.BrowserChannelServer.invokeJavascript(BrowserChannelServer.java:195) at com.google.gwt.dev.shell.ModuleSpaceOOPHM.doInvoke(ModuleSpaceOOPHM.java:120) at com.google.gwt.dev.shell.ModuleSpace.invokeNative(ModuleSpace.java:507) at com.google.gwt.dev.shell.ModuleSpace.invokeNativeObject(ModuleSpace.java:264) at com.google.gwt.dev.shell.JavaScriptHost.invokeNativeObject(JavaScriptHost.java:91) at follovizer.gwt.client.AnduINAppletImpl.SendAndReceive(AnduINAppletImpl.java) at follovizer.gwt.client.FolloVizerGWT.createLayout(FolloVizerGWT.java:92) at follovizer.gwt.client.FolloVizerGWT.onModuleLoad(FolloVizerGWT.java:40) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.google.gwt.dev.shell.ModuleSpace.onLoad(ModuleSpace.java:369) at com.google.gwt.dev.shell.OophmSessionHandler.loadModule(OophmSessionHandler.java:185) at com.google.gwt.dev.shell.BrowserChannelServer.processConnection(BrowserChannelServer.java:380) at com.google.gwt.dev.shell.BrowserChannelServer.run(BrowserChannelServer.java:222) at java.lang.Thread.run(Thread.java:619)

  Read the article

• phpmailer with hotmail?

  - by nikola

  I'm trying to send emails from my server by a PHP script. I used to send it by a native php function mail and everything worked OK. Here's the code I used: $to = $sMail;<br> $subject = $sSubject;<br> $message = $sMessage; $headers = 'From: [email protected]' . "\r\n";<br> $headers .= 'Reply-To: [email protected]' . "\r\n";<br> $headers .= 'MIME-Version: 1.0' . "\r\n";<br> $headers .= 'Content-type: text/html; charset=UTF-8' . "\r\n";<br> $bRes = mail($to, $subject, $message, $headers); I then switched to PHPMailer, and wasn't able to send mail to Hotmail accounts (all the other still worked). Hotmail server reports the error: "550 SC-001 Mail rejected by Windows Live Hotmail for policy reasons." This is the code I used for PHPMailer: $mail = new PHPMailer();<br> $mail->IsHTML(true);<br> $mail->CharSet = 'UTF-8';<br> $mail->From = '[email protected]';<br> $mail->FromName = 'domain.com';<br> $mail->Subject = $sSubject;;<br> $mail->Body = $sMessage;<br> $mail->AltBody = strip_tags($sMessage;);<br> $mail->AddAddress($sMail);<br> $mail->Send();<br> $mail->ClearAddresses();<br> $mail->ClearAttachments(); As the sending works with the native function, I'm sure my server is able to send mails to hotmail. There must be a property to set when using PHPMailer, but I can't seem to find the right one. Anyone knows something abouth this? Thank you very much!

  Read the article

• jQuery unbinding click event when maximum number of children are displayed

  - by RyanP13

  I have a personal details form that alows you to enter a certain number of dependants which is determined by the JSP application. The first dependant is visible and the user has the option to add dependants up to the maximum number. All other dependants are hidden by default and are displayed when a user clicks the 'Add another dependant button'. When the maximum number of dependants has been reached the button is greyed out and a message is generated via jQuery and displayed to tell the user exactly this. The issue i am having is when the maximum number of dependants has been reached the message is displayed but then the user can click the button to add more dependants and the message keeps on generating. I thought unbinding the click event would sort this but it seems to still be able to generate a second message. Here is the function i wrote to generate the message: // Dependant message function function maxDependMsg(msgElement) { // number of children can change per product, needs to be dynamic // count number of dependants in HTML var $dependLength = $("div.dependant").length; // add class maxAdd to grey out Button // create maximum dependants message and display, will not be created if JS turned off $(msgElement) .addClass("maxAdd") .after($('<p>') .addClass("maxMsg") .append("The selected web policy does not offer cover for more than " + $dependLength + " children, please contact our customer advisers if you wish discuss alternative policies available.")); } There is a hyperlink with a click event attached like so: $("a.add").click(function(){ // Show the next hidden table on clicking add child button $(this).closest('form').find('div.dependant:hidden:first').show(); // Get the number of hidden tables var $hiddenChildren = $('div.dependant:hidden').length; if ($hiddenChildren == 0) { // save visible state of system message $.cookies.set('cpqbMaxDependantMsg', 'visible'); // show system message that you can't add anymore dependants than what is on page maxDependMsg("a.add"); $(this).unbind("click"); } // set a cookie for the visible state of all child tables $('div.dependant').each(function(){ var $childCount = $(this).index('div.dependant'); if ($(this).is(':visible')) { $.cookies.set('cpqbTableStatus' + $childCount, 'visible'); } else { $.cookies.set('cpqbTableStatus' + $childCount, 'hidden'); } }); return false; }); All of the cookies code is for state saving when users are going back and forward through the process.

  Read the article

• glassfish v3.0 hangs no app is ever deployed and no error is ever shown

  - by Samuel Lopez

  I have a web app that uses JSF 2.0 with richFaces and primeFaces, hibernate and java and I use NetBeans 7.1.2 as the IDE when I run the app the glassfish server is started and the log shows this: Launching GlassFish on Felix platform Información: Running GlassFish Version: GlassFish Server Open Source Edition 3.1.2 (build 23) Información: Grizzly Framework 1.9.46 started in: 20ms - bound to [0.0.0.0:4848] Información: Grizzly Framework 1.9.46 started in: 32ms - bound to [0.0.0.0:8181] Información: Grizzly Framework 1.9.46 started in: 59ms - bound to [0.0.0.0:8080] Información: Grizzly Framework 1.9.46 started in: 32ms - bound to [0.0.0.0:3700] Información: Grizzly Framework 1.9.46 started in: 21ms - bound to [0.0.0.0:7676] Información: Registered org.glassfish.ha.store.adapter.cache.ShoalBackingStoreProxy for persistence-type = replicated in BackingStoreFactoryRegistry Información: SEC1002: Security Manager is OFF. Información: SEC1010: Entering Security Startup Service Información: SEC1143: Loading policy provider com.sun.enterprise.security.provider.PolicyWrapper. Información: SEC1115: Realm [admin-realm] of classtype [com.sun.enterprise.security.auth.realm.file.FileRealm] successfully created. Información: SEC1115: Realm [file] of classtype [com.sun.enterprise.security.auth.realm.file.FileRealm] successfully created. Información: SEC1115: Realm [certificate] of classtype [com.sun.enterprise.security.auth.realm.certificate.CertificateRealm] successfully created. Información: SEC1011: Security Service(s) Started Successfully Información: WEB0169: Created HTTP listener [http-listener-1] on host/port [0.0.0.0:8080] Información: WEB0169: Created HTTP listener [http-listener-2] on host/port [0.0.0.0:8181] Información: WEB0169: Created HTTP listener [admin-listener] on host/port [0.0.0.0:4848] Información: WEB0171: Created virtual server [server] Información: WEB0171: Created virtual server [__asadmin] Información: WEB0172: Virtual server [server] loaded default web module [] Información: Inicializando Mojarra 2.1.6 (SNAPSHOT 20111206) para el contexto '/test' Información: Hibernate Validator 4.2.0.Final Información: WEB0671: Loading application [test] at [/test] Información: CORE10010: Loading application test done in 4,885 ms Información: GlassFish Server Open Source Edition 3.1.2 (23) startup time : Felix (1,848ms), startup services(5,600ms), total(7,448ms) Información: JMX005: JMXStartupService had Started JMXConnector on JMXService URL service:jmx:rmi://SJ007:8686/jndi/rmi://SJ007:8686/jmxrmi Información: WEB0169: Created HTTP listener [http-listener-1] on host/port [0.0.0.0:8080] Información: Grizzly Framework 1.9.46 started in: 14ms - bound to [0.0.0.0:8080] Información: WEB0169: Created HTTP listener [http-listener-2] on host/port [0.0.0.0:8181] Información: Grizzly Framework 1.9.46 started in: 12ms - bound to [0.0.0.0:8181] but right there it hangs and the deploy bar keeps running but no more actions are shown, nothing else is logged either it just stays there until I stop the deploy Is there any other error log to debug glassfish server? Any thoughts? I have re installed glassfish and NetBeans but it all seems the same. I think this started happening after I had to force-restart my computer with NetBeans stil open and the app deployed, but it's hard to know for sure if this was the real catalyst. Any thoughts or help is appreciated thanks. Is it an app error? if so why no errors in the log are shown?

  Read the article

• WebClient security error when accessing the world of warcraft armoury

  - by user348446

  Hello World, I am trying to piece together a solution to a problem. Basically I am using Silverlight 4 with C# 4.0 to access the world of warcraft armoury. If anyone has done this - please oh please provide the working .net 4.0 code. The code I am attempting to run is (e.Error contains a securtiy error): private void button10_Click(object sender, RoutedEventArgs e) { string url = @"http://eu.wowarmory.com/guild-info.xml?r=Eonar&n=Gifted and Talented"; WebClient wc = new WebClient(); // HOW DO I ADD A USER AGENT STRING (RESPONSE MAY VARY (I.E. HTML VS XML) IF PAGE THINKS CALL IS NOT CAPABABLE OF SUPPORTING XML TRANSFORMATIONS) //wc.ResponseHeaders["User-Agent"] = "Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0)"; wc.DownloadStringCompleted += new DownloadStringCompletedEventHandler(wc_DownloadStringCompleted); wc.DownloadStringAsync(new Uri(url)); } void wc_DownloadStringCompleted(object sender, DownloadStringCompletedEventArgs e) { if (e.Error == null) { string result = e.Result; XDocument ArmouryXML = XDocument.Parse(result); ShowGuildies(ArmouryXML); } else { MessageBox.Show("Something is complaining about security but not sure what!"); } } Notes: C# 4.0 The armoury is an XML file - but i believe it reverts to html should the request not be from a browser that supports XML transformation. But i don't think I am getting this far. The armoury has a cross domain policy file on it - this may be the cause of the error (not sure! I have uploaded to a production server I am testing it locally using IIS website I am going insane! Websites have made the suggestion that this problem can be overcome by creating a WebProxy - but I haven't the first clue how to do this. It would be great if someone could take on this challenge and show us all that it is possible. I'd prefer a non-proxy solution first, then try a proxy. The error details: e.Error = {System.Security.SecurityException --- System.Security.SecurityException: Security error. at System.Net.Browser.BrowserHttpWebRequest.InternalEndGetResponse(IAsyncResult asyncResult) at System.Net.Browser.BrowserHttpWebRequest.<c__DisplayClass5. Any intelligent master coders out there who can solve this in their sleep? Thanks if you can! Pass this on to someone who can if you can't. If you know someone who can't, don't pass it to them, but if you know someone can't then presumedly you know how to solve it and would encourage you to give it a go! Cheers! Dan.

  Read the article

• android hellomap example giving exception

  - by avin

  06-14 22:13:33.992: ERROR/AndroidRuntime(331): Uncaught handler: thread main exiting due to uncaught exception 06-14 22:13:34.031: ERROR/AndroidRuntime(331): java.lang.RuntimeException: Unable to start activity ComponentInfo{com.example/com.example.HelloMap}: android.view.InflateException: Binary XML file line #6: Error inflating class com.google.android.maps.MapView 06-14 22:13:34.031: ERROR/AndroidRuntime(331): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2496) 06-14 22:13:34.031: ERROR/AndroidRuntime(331): at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:2512) 06-14 22:13:34.031: ERROR/AndroidRuntime(331): at android.app.ActivityThread.access$2200(ActivityThread.java:119) 06-14 22:13:34.031: ERROR/AndroidRuntime(331): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1863) 06-14 22:13:34.031: ERROR/AndroidRuntime(331): at android.os.Handler.dispatchMessage(Handler.java:99) 06-14 22:13:34.031: ERROR/AndroidRuntime(331): at android.os.Looper.loop(Looper.java:123) 06-14 22:13:34.031: ERROR/AndroidRuntime(331): at android.app.ActivityThread.main(ActivityThread.java:4363) 06-14 22:13:34.031: ERROR/AndroidRuntime(331): at java.lang.reflect.Method.invokeNative(Native Method) 06-14 22:13:34.031: ERROR/AndroidRuntime(331): at java.lang.reflect.Method.invoke(Method.java:521) 06-14 22:13:34.031: ERROR/AndroidRuntime(331): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:860) 06-14 22:13:34.031: ERROR/AndroidRuntime(331): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:618) 06-14 22:13:34.031: ERROR/AndroidRuntime(331): at dalvik.system.NativeStart.main(Native Method) 06-14 22:13:34.031: ERROR/AndroidRuntime(331): Caused by: android.view.InflateException: Binary XML file line #6: Error inflating class com.google.android.maps.MapView 06-14 22:13:34.031: ERROR/AndroidRuntime(331): at android.view.LayoutInflater.createView(LayoutInflater.java:513) 06-14 22:13:34.031: ERROR/AndroidRuntime(331): at android.view.LayoutInflater.createViewFromTag(LayoutInflater.java:565) 06-14 22:13:34.031: ERROR/AndroidRuntime(331): at android.view.LayoutInflater.rInflate(LayoutInflater.java:618) 06-14 22:13:34.031: ERROR/AndroidRuntime(331): at android.view.LayoutInflater.inflate(LayoutInflater.java:407) 06-14 22:13:34.031: ERROR/AndroidRuntime(331): at android.view.LayoutInflater.inflate(LayoutInflater.java:320) 06-14 22:13:34.031: ERROR/AndroidRuntime(331): at android.view.LayoutInflater.inflate(LayoutInflater.java:276) 06-14 22:13:34.031: ERROR/AndroidRuntime(331): at com.android.internal.policy.impl.PhoneWindow.setContentView(PhoneWindow.java:198) 06-14 22:13:34.031: ERROR/AndroidRuntime(331): at android.app.Activity.setContentView(Activity.java:1622) 06-14 22:13:34.031: ERROR/AndroidRuntime(331): at com.example.HelloMap.onCreate(HelloMap.java:16) 06-14 22:13:34.031: ERROR/AndroidRuntime(331): at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1047) 06-14 22:13:34.031: ERROR/AndroidRuntime(331): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2459) 06-14 22:13:34.031: ERROR/AndroidRuntime(331): ... 11 more 06-14 22:13:34.031: ERROR/AndroidRuntime(331): Caused by: java.lang.reflect.InvocationTargetException 06-14 22:13:34.031: ERROR/AndroidRuntime(331): at com.google.android.maps.MapView.(MapView.java:237) 06-14 22:13:34.031: ERROR/AndroidRuntime(331): at java.lang.reflect.Constructor.constructNative(Native Method) 06-14 22:13:34.031: ERROR/AndroidRuntime(331): at java.lang.reflect.Constructor.newInstance(Constructor.java:446) 06-14 22:13:34.031: ERROR/AndroidRuntime(331): at android.view.LayoutInflater.createView(LayoutInflater.java:500) 06-14 22:13:34.031: ERROR/AndroidRuntime(331): ... 21 more 06-14 22:13:34.031: ERROR/AndroidRuntime(331): Caused by: java.lang.IllegalArgumentException: MapViews can only be created inside instances of MapActivity. 06-14 22:13:34.031: ERROR/AndroidRuntime(331): at com.google.android.maps.MapView.(MapView.java:281) 06-14 22:13:34.031: ERROR/AndroidRuntime(331): at com.google.android.maps.MapView.(MapView.java:254) 06-14 22:13:34.031: ERROR/AndroidRuntime(331): ... 25 more i had done all configuration plz let ny1 got idea?

  Read the article

• Jquery get selected checkboxes

  - by kevin

  Hi id like to get the list of selected checkboxes ina page, actually what I really need is th get the text of the element next to the checkbox which is a html element the code is below and its not working the html is as follows <script type="text/javascript"> $(document).ready(function () { $('#target').click(function () { alert("in"); var checkValues = []; $('input[name=checkboxlist]:checked').each(function() { alert($(this)val()); checkValues.push($(this)val()); }); }); }); </script> HTML: <ul id="7b1fe2bd-1b26-4185-8cd9-aec10e652a70"> <li>Structured Products<input type="checkbox" name="checkboxlist"</li> <li>Global FID <ul> <li>PowerPoint Presentations<input type="checkbox" name="checkboxlist"</li> <li>Global Deck <ul> <li>Test1<input type="checkbox" name="checkboxlist"</li> <li>Test2<input type="checkbox" name="checkboxlist"</li> <li>Test3<input type="checkbox" name="checkboxlist"</li> </ul> <input type="checkbox" name="checkboxlist"</li> <li>Credit Default Swaps Position <ul> <li>Test4<input type="checkbox" name="checkboxlist"</li> <li>Test5<input type="checkbox" name="checkboxlist"</li> </ul> <input type="checkbox" name="checkboxlist"</li> <li>Thought Leadership<input type="checkbox" name="checkboxlist"</li> <li>Fixed Income Perspectives<input type="checkbox" name="checkboxlist"</li> <li>Public Policy Information and Regulatory<input type="checkbox" name="checkboxlist"</li> <li>Regional FID<input type="checkbox" name="checkboxlist"</li> </ul> <input type="checkbox" name="checkboxlist"</li> <li>Global Rates<input type="checkbox" name="checkboxlist"</li> <li>Global Credit Products<input type="checkbox" name="checkboxlist"</li> <li>FX<input type="checkbox" name="checkboxlist"</li> <li>Emerging Markets<input type="checkbox" name="checkboxlist"</li> <li>Commodities<input type="checkbox" name="checkboxlist"</li> <li>testcat<input type="checkbox" name="checkboxlist"</li> <li>testcat<input type="checkbox" name="checkboxlist"</li> </ul>

  Read the article

• html widget communicating with server

  - by Nikita Rybak

  I'm making html widget for websites. Let's say, it will display current stock indexes. In short, arbitrary website owner takes code snippet from me and includes it on his webpage http://website.com/index.html. When arbitrary user opens http://website.com/index.html, my code sends request to my server (provider.com), which performs necessary operations and returns information to user's browser. When response has arrived, user will see relevant stock value on http://website.com/index.html. In index.html service could be called like this <script type="text/javascript" src="provider.com/service.js"> </script> <div id="target_area"></div> <script type="text/javascript"> service.show("target_area", options); </script> Now, the problem is in the same origin policy: I can't just send ajax request from website.com to provided.com and return html to embed in client's webpage. I see several solutions, which I list below, but none quite satisfy me. I wonder, if you could suggest something, especially if you had some relevant experience. 1) iframe, plain and simple. Disadvantage: must have fixed dimensions + stupid scroll bars appearing in some browsers. Can be fixed with javascript, but all this browser-specific tinkering doesn't sound good to me. 2) JSONP. Problem: can't return whole chunk of html, must return only data. Then, on browser side, I'll have to use javascript to embed data into html snippet placed statically in index.html. Doesn't sound nice, because data format is not very simple and may even change later. 3) Use hidden iframe to do ajax requests. A bit tricky, but sounds like a way to go. Well, that's my thoughts on the subject. Are there any better ways? BTW, I tried to check some existing widgets too, but didn't find much useful information. All domain names used in this text are fictional and any resemblance is purely coincidental :)

  Read the article

• Strategy pattern and "action" classes explosion

  - by devoured elysium

  Is it bad policy to have lots of "work" classes(such as Strategy classes), that only do one thing? Let's assume I want to make a Monster class. Instead of just defining everything I want about the monster in one class, I will try to identify what are its main features, so I can define them in interfaces. That will allow to: Seal the class if I want. Later, other users can just create a new class and still have polymorphism by means of the interfaces I've defined. I don't have to worry how people (or myself) might want to change/add features to the base class in the future. All classes inherit from Object and they implement inheritance through interfaces, not from mother classes. Reuse the strategies I'm using with this monster for other members of my game world. Con: This model is rigid. Sometimes we would like to define something that is not easily achieved by just trying to put together this "building blocks". public class AlienMonster : IWalk, IRun, ISwim, IGrowl { IWalkStrategy _walkStrategy; IRunStrategy _runStrategy; ISwimStrategy _swimStrategy; IGrowlStrategy _growlStrategy; public Monster() { _walkStrategy = new FourFootWalkStrategy(); ...etc } public void Walk() { _walkStrategy.Walk(); } ...etc } My idea would be next to make a series of different Strategies that could be used by different monsters. On the other side, some of them could also be used for totally different purposes (i.e., I could have a tank that also "swims"). The only problem I see with this approach is that it could lead to a explosion of pure "method" classes, i.e., Strategy classes that have as only purpose make this or that other action. In the other hand, this kind of "modularity" would allow for high reuse of stratagies, sometimes even in totally different contexts. What is your opinion on this matter? Is this a valid reasoning? Is this over-engineering? Also, assuming we'd make the proper adjustments to the example I gave above, would it be better to define IWalk as: interface IWalk { void Walk(); } or interface IWalk { IWalkStrategy WalkStrategy { get; set; } //or something that ressembles this } being that doing this I wouldn't need to define the methods on Monster itself, I'd just have public getters for IWalkStrategy (this seems to go against the idea that you should encapsulate everything as much as you can!) Why? Thanks

  Read the article

• Connecting to a WSE 3.0 Web Service From a WCF Client

  - by Dave

  I'm having difficulty connecting to a 3rd party WSE 3.0 web service from a WCF client. I have implemented the custom binding class as indicated in this KB article: http://msdn.microsoft.com/en-us/library/ms734745.aspx The problem seems to have to do with the security assertion used by the web service - UsernameOverTransport. When I attempt to call a method, I get the following exception: System.InvalidOperationException: The 'WseHttpBinding'.'[namespace]' binding for the 'MyWebServiceSoap'.'[namespace]' contract is configured with an authentication mode that requires transport level integrity and confidentiality. However the transport cannot provide integrity and confidentiality.. It is expecting a username, password, and CN number. In the example code supplied to us by the vendor, these credentials are bundled in a Microsoft.Web.Services3.Security.Tokens.UsernameToken. Here's the example supplied by the vendor: MyWebServiceWse proxy = new MyWebServiceWse(); UsernameToken token = new UsernameToken("Username", "password", PasswordOption.SendPlainText); token.Id = "<supplied CN Number>"; proxy.SetClientCredential(token); proxy.SetPolicy(new Policy(new UsernameOverTransportAssertion(), new RequireActionHeaderAssertion())); MyObject mo = proxy.MyMethod(); This works fine from a 2.0 app w/ WSE 3.0 installed. Here is a snippet of the code from my WCF client: EndpointAddress address = new EndpointAddress(new Uri("<web service uri here>")); WseHttpBinding binding = new WseHttpBinding(); // This is the custom binding I created per the MS KB article binding.SecurityAssertion = WseSecurityAssertion.UsernameOverTransport; binding.EstablishSecurityContext = false; // Not sure about the value of either of these next two binding.RequireDerivedKeys = true; binding.MessageProtectionOrder = MessageProtectionOrder.SignBeforeEncrypt; MembershipServiceSoapClient proxy = new MembershipServiceSoapClient(binding, address); // This is where I believe the problem lies – I can’t seem to properly setup the security credentials the web service is expecting proxy.ClientCredentials.UserName.UserName = "username"; proxy.ClientCredentials.UserName.Password = "pwd"; // How do I supply the CN number? MyObject mo = proxy.MyMethod(); // this throws the exception I've scoured the web looking for an answer to this question. Some sources get me close (like the MS KB article), but I can't seem to get over the hump. Can someone help me out?

  Read the article

< Previous Page | 98 99 100 101 102 103 104 105 106 107 108 109  | Next Page >