Search Results

Search found 2681 results on 108 pages for 'mod packs'.

Page 102/108 | < Previous Page | 98 99 100 101 102 103 104 105 106 107 108  | Next Page >

  • Taking a Flying Leap

    - by Lance Shaw
    Yesterday, I went skydiving with three of my children.  It was thrilling, scary, invigorating and exciting. While there is obvious risk involved, the reward and feeling of success was well worth it. You might already be wondering what skydiving would have to with WebCenter, so let me explain. Implementing a skydiving program and becoming an instructor does not happen overnight.  It does not happen with the purchase of the needed technology. Not one of us would go out, buy a parachute, the harnesses, helmet and all the gear and be able to convince anyone that we are now ready to be a skydiving instructor. The fact is that obtaining the technology is merely a small piece of the overall process and so is the case with managing content in your company. You don't just buy the right software (Oracle WebCenter Content) and go to your boss and declare information management success. There is planning, research and effort that goes into deploying software of any kind and especially when it is as mission-critical to the success of your business as Enterprise Content Management. To become a certified skydiving instructor takes at least 3 years of commitment and often longer. In the United States, candidates must complete over 500 solo jumps of their own over a minimum of 36 months and then must complete additional rigorous training under observation.  When you consider the amount of time and effort involved, it's not unlike getting a college degree and anyone that has trusted their lives to one of these instructors will no doubt appreciate their dedication to the curriculum.  Implementing an ECM system won't take that long, but it certainly requires commitment, analysis and consideration. But guess what?  Humans are involved and that means that mistakes can happen and that rules change.  This struck me while reading an excellent post on darkreading.com by Glenn S. Phillips entitled "Mission Impossible: 4 Reasons Compliance is Impossible".  His over-arching point was that with information management and security, environments change and people are involved meaning the work is never done.  He stated that you can never claim your compliance efforts are complete because of the following reasons. People are involved.  And lets face it, some are more trustworthy than others. Change is Constant. There is always some new technology coming along that is disruptive. Consumer grade cloud file sharing and sync tools come to mind here. Compliance is interpreted, not defined.  Laws and the judges that read them are always on the move. Technology is a tool, not a complete solution. There is no magic pill. The skydiving analogy holds true here as well.  Ultimately, a single person packs your parachute.  For obvious reasons, you prefer that this person be trustworthy but there are no absolute guarantees of a 100% error-free scenario.  Weather and wind conditions are never a constant and the best-laid plans for a great day of skydiving are easily disrupted by forces outside of your control.  Rules and regulations vary by location and may be updated at any time and as I mentioned early on, even the best technology on its own will only get you started. The good news is that, like skydiving, with the right technology, the right planning, the right team and a proper understanding of the rules and regulations that govern your industry, your ECM deployment can be a great success.  Failure to plan for any of the 4 factors that Glenn outlined in his article will certainly put your deployment and maybe even your company at risk, so consider them carefully. As a final aside, for those of you who consider skydiving an incredibly dangerous and risky pastime, consider this comparative statistic.  In 2012, the U.S. Parachute Association recorded 19 fatal skydiving accidents in the U.S. out of roughly 3.1 million jumps.  That’s 0.006 fatalities per 1,000 jumps. By comparison, the U.S. National Highway Traffic Safety Administration reports that there were 34,080 deaths due to car accidents in 2012.  Based on the percentages, one could argue that it is safer to jump out of a plane than to drive to the airport where the skydiving will take place. While the way you manage, secure, classify, control, retain and dispose of company files may not carry as much risk as driving or skydiving, it certainly carries risk for the organization when not planned and deployed appropriately.  Consider all the factors involved in your organization as you make your content management plans.  For additional areas of consideration, be sure to download our free whitepaper on the topic entitled "The Top 10 Criteria for Choosing an ECM System" which is available for download here.

    Read the article

  • Intel Centrino Wireless-N 1000 Again ! Ubuntu 13.04 x64

    - by vafa
    First I have to say that I tried everything written about this concept. The problem is that it stops working randomly in 3 main forms : 1 - sometimes it disconnect from wireless network and reconnect automatically 2 - sometimes it disconnect and wont connect no matter what (needs reboot) 3 - some times it's still connected but cannot ping or surf or whatever. I already tried disabling N mod using these commands : sudo modprobe -r iwlwifi modprobe iwlwifi 11n_disable=1 (or 0, whatever) it didn't help . these are the results of lspci, sudo lshw -C network, ifconfig, iwconfig, rfkill list when it disconnected and didn't connect till reboot : ifconfig : eth0 Link encap:Ethernet HWaddr c8:0a:a9:34:65:77 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:1563213476557380 errors:9379306629148050 dropped:3126435543049350 overruns:1563217771524675 frame:7816088857623375 TX packets:1563217771524675 errors:6252871086098700 dropped:0 overruns:1563217771524675 carrier:3126435543049350 collisions:7816088857623375 txqueuelen:1000 RX bytes:1563217771524675 (1.5 PB) TX bytes:1563217771524675 (1.5 PB) ham0 Link encap:Ethernet HWaddr 7a:79:19:a5:e4:93 inet addr:25.165.228.147 Bcast:25.255.255.255 Mask:255.0.0.0 inet6 addr: fe80::7879:19ff:fea5:e493/64 Scope:Link inet6 addr: 2620:9b::19a5:e493/96 Scope:Global UP BROADCAST RUNNING MULTICAST MTU:1404 Metric:1 RX packets:7743 errors:0 dropped:0 overruns:0 frame:0 TX packets:1250 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:665642 (665.6 KB) TX bytes:204056 (204.0 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:41138 errors:0 dropped:0 overruns:0 frame:0 TX packets:41138 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6420962 (6.4 MB) TX bytes:6420962 (6.4 MB) wlan0 Link encap:Ethernet HWaddr 00:1e:64:45:fb:70 inet6 addr: fe80::21e:64ff:fe45:fb70/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:286999 errors:0 dropped:0 overruns:0 frame:0 TX packets:226966 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:324386887 (324.3 MB) TX bytes:30674804 (30.6 MB) iwconfig : ham0 no wireless extensions. eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=14 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off sudo lshw -C network: *-network description: Wireless interface product: Centrino Wireless-N 1000 [Condor Peak] vendor: Intel Corporation physical id: 0 bus info: pci@0000:07:00.0 logical name: wlan0 version: 00 serial: 00:1e:64:45:fb:70 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.8.0-30-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bg resources: irq:46 memory:c0400000-c0401fff *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: c0 serial: c8:0a:a9:34:65:77 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.1-NAPI latency=0 link=no multicast=yes port=twisted pair resources: irq:47 memory:c0900000-c093ffff ioport:5000(size=128) *-network description: Ethernet interface physical id: 2 logical name: ham0 serial: 7a:79:19:a5:e4:93 size: 10Mbit/s capabilities: ethernet physical configuration: autonegotiation=off broadcast=yes driver=tun driverversion=1.6 duplex=full ip=25.165.228.147 link=yes multicast=yes port=twisted pair speed=10Mbit/s lspci: 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.3 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: NVIDIA Corporation G98M [GeForce G 105M] (rev a1) 07:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 [Condor Peak] 09:00.0 Ethernet controller: Qualcomm Atheros AR8131 Gigabit Ethernet (rev c0) rfkill list : 1: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no 2: acer-bluetooth: Bluetooth Soft blocked: yes Hard blocked: no 9: phy0: Wireless LAN Soft blocked: no Hard blocked: no any help will be REALLLYYYY appreciated

    Read the article

  • System.UriFormatException: Invalid URI: The hostname could not be parsed.

    - by Shane
    All of a sudden I'm getting the following error on my website. It doesnt access a db. just a simple website using .net 2.0. I did recently apply the available windows server 2003 service packs. Could that have changed things? I should add the error randomly comes and goes and has been doing so for today and yesterday. I leave it for 5 minutes and the error is gone. Server Error in '/' Application. Invalid URI: The hostname could not be parsed. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.UriFormatException: Invalid URI: The hostname could not be parsed. Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [UriFormatException: Invalid URI: The hostname could not be parsed.] System.Uri.CreateThis(String uri, Boolean dontEscape, UriKind uriKind) +5367536 System.Uri.CreateUri(Uri baseUri, String relativeUri, Boolean dontEscape) +31 System.Uri..ctor(Uri baseUri, String relativeUri) +34 System.Net.HttpWebRequest.CheckResubmit(Exception& e) +5300867 [WebException: Cannot handle redirect from HTTP/HTTPS protocols to other dissimilar ones.] System.Net.HttpWebRequest.GetResponse() +5314029 System.Xml.XmlDownloadManager.GetNonFileStream(Uri uri, ICredentials credentials) +69 System.Xml.XmlDownloadManager.GetStream(Uri uri, ICredentials credentials) +3929371 System.Xml.XmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn) +54 System.Xml.XmlTextReaderImpl.OpenUrlDelegate(Object xmlResolver) +74 System.Threading.CompressedStack.runTryCode(Object userData) +70 System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData) +0 System.Threading.CompressedStack.Run(CompressedStack compressedStack, ContextCallback callback, Object state) +108 System.Xml.XmlTextReaderImpl.OpenUrl() +186 System.Xml.XmlTextReaderImpl.Read() +208 System.Xml.XmlLoader.Load(XmlDocument doc, XmlReader reader, Boolean preserveWhitespace) +112 System.Xml.XmlDocument.Load(XmlReader reader) +108 System.Web.UI.WebControls.XmlDataSource.PopulateXmlDocument(XmlDocument document, CacheDependency& dataCacheDependency, CacheDependency& transformCacheDependency) +303 System.Web.UI.WebControls.XmlDataSource.GetXmlDocument() +153 System.Web.UI.WebControls.XmlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +29 System.Web.UI.WebControls.BaseDataList.GetData() +39 System.Web.UI.WebControls.DataList.CreateControlHierarchy(Boolean useDataSource) +264 System.Web.UI.WebControls.BaseDataList.OnDataBinding(EventArgs e) +55 System.Web.UI.WebControls.BaseDataList.DataBind() +75 System.Web.UI.WebControls.BaseDataList.EnsureDataBound() +55 System.Web.UI.WebControls.BaseDataList.CreateChildControls() +65 System.Web.UI.Control.EnsureChildControls() +97 System.Web.UI.Control.PreRenderRecursiveInternal() +53 System.Web.UI.Control.PreRenderRecursiveInternal() +202 System.Web.UI.Control.PreRenderRecursiveInternal() +202 System.Web.UI.Control.PreRenderRecursiveInternal() +202 System.Web.UI.Control.PreRenderRecursiveInternal() +202 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4588

    Read the article

  • Finding edge and corner values of an image in matlab

    - by James
    Hi, this problem links to two other questions i've asked on here. I am tracing the outline of an image and plotting this to a dxf file. I would like to use the bwboundaries function to find the coordinates of the edges of the image, find the corner coordinates using the cornermetric function and then remove any edge coordinates that are not a corner. The important thing I need to be able to do is keep the order of the corner elements obtained from bwboundaries, so that the section traces properly. The dxf function I have that draws from the coordinates draws lines between coordinates that are next to each other, so the line has to be drawn "around" the section rather than straight between the corner points. The reason I am doing this is because there are less coordinates obtained this way, so it is easier to amend the dxf file (as there are less points to manipulate). The code I have so far is: %# Shape to be traced bw = zeros(200); bw(20:40,20:180) = 1; bw(20:180,90:110) = 1; bw(140:180,20:185) = 1; %# Boundary Finding Section [Boundary] = bwboundaries(bw); %Traces the boundary of each section figure, imshow(bw); hold on; colors=['b' 'g' 'r' 'c' 'm' 'y']; for k=1:length(Boundary) perim = Boundary{k}; %Obtains perimeter coordinates (as a 2D matrix) from the cell array cidx = mod(k,length(colors))+1;% Obtains colours for the plot plot(perim(:,2), perim(:,1),... colors(cidx),'LineWidth',2); end Coordmat = cell2mat(Boundary) %Converts the traced regions to a matrix X = Coordmat(:,1) Y = Coordmat(:,2) % This gives the edge coordinates in matrix form %% Corner Finding Section (from Jonas' answer to a previous question %# get corners cornerProbability = cornermetric(bw); cornerIdx = find(cornerProbability==max(cornerProbability(:))); %# Label the image. bwlabel puts 1 for the first feature, 2 for the second, etc. %# Since concave corners are placed just outside the feature, grow the features %# a little before labeling bw2 = imdilate(bw,ones(3)); labeledImage = bwlabel(bw2); %# read the feature number associated with the corner cornerLabels = labeledImage(cornerIdx); %# find all corners that are associated with feature 1 corners_1 = cornerIdx(cornerLabels==1) [Xcorners, Ycorners] = ind2sub(200,corners_1) % Convert subscripts The code I have is, to give a matrix Xfin for the final x coordinates (which are on the edge AND at a corner. Xfin = zeros(length(X),1) for i = Xcorners XFin(i) = Xcorners if i~= Xcorners XFin(i) = [] end end However, this does not work correctly, because the values in the solution are sorted into order, and only one of each value remains. As I said, I would like the corner elements to be in the same order as obtained from bwboundaries, to allow the image to trace properly. Thanks

    Read the article

  • Processing an Integer Buried in a String in XSL

    - by justkt
    I have a stored time value which is of the format H:mm:ss. The hours may be any value from 0 up through several days. This data is sent in an XML tag and processed by XSL to be displayed. The display that I want is of the format: D days, HH:mm:ss (hours/minutes) Where the last tag shows hours if HH is greater than 0, minutes if it is 0. Given the original HH, which may be more than 24, I know I need the floor of HH / 24 to get the days value. Then the original HH % 24 gives me the leftover hours. I have also handled the minutes and hours question using xsl:when and xsl:if. It's getting days and hours from the hours value that has me stumped. EDIT So far, I'm looking at doing the following: Variable declaration <xsl:variable name="time"><xsl:value-of select="time" /><xsl:variable> <xsl:variable name="days"><xsl:value-of select="floor(substring-before(time, ':') / 24)" /></xsl:variable> <xsl:variable name="hours"><xsl:value-of select="substring-before(time, ':') mod 24" /></xsl:variable> <xsl:variable name="minutes"><xsl:value-of select="substring-after(time, ':')" /></xsl:variable> Use <xsl:if test="$days > 0"> <xsl:value-of select="$days" /> days </xsl:if> <xsl:value-of select="$hours" />:<xsl:value-of select="$minutes" /> <xsl:choose> <xsl:when test="$hours > 0"> hour<xsl:if test="$hours > 1">s</xsl:if> </xsl:when> <xsl:otherwise> minute<xsl:if test="$minute != '01:00'">s</xsl:if> </xsl:otherwise> </xsl:choose> And for clarification, a sample time would be <time>26:15:00</time> for 1 day 2:15 hours.

    Read the article

  • using php's libcurl to register user and upload file to server

    - by tunpishuang
    here is a site http://www.lyrkjsw.gov.cn that can let the registered user to upload file (e.g. images or office files) to the site. i want to register user and upload image to this site using libcurl binding with php. only registered user can upload image. so i use cookiejar stored in c:\cookie.txt after register and use c:\cookie.txt in uploadImg() function . register user is valid but failed to upload image , can anybody know is there any mistake of my code: <? /* options */ //the list url $expUrl='http://www.lyrkjsw.gov.cn/hbcms/user/list_resource.php'; //the user info to be registered $regUser='jiong'; $regPass='jiong'; $regMail='[email protected]'; $regUrl=str_replace('list_resource.php','register.php',$expUrl); // options for image upload $fileDir='@D:\img\b.jpg'; $fileTitle='aaaaaaaaaaaaa'; $fileDesc='aaaaaaaaaaaaadesc'; $uploadImgUrl=str_replace('list_resource.php','add_resource.php',$expUrl); /* register function */ function reg($regurl,$u,$p,$m) { $ch = curl_init(); $options=array( CURLOPT_URL=>$regurl, CURLOPT_RETURNTRANSFER=>true, CURLOPT_POST=>true, CURLOPT_POSTFIELDS=>'mod=register_now&next_url=index.php&addon_app=&referrer_id=&login_name='.$u.'&login_pass='.$p.'&confirm_login_pass='.$p.'&login_email='.$m.'&nickname=&gender=0&qq=&mobile=&telephone=&true_name=&website_name=&website_url=&my_question=&my_answer=', CURLOPT_COOKIESESSION=>true, CURLOPT_HEADER=>true, CURLOPT_COOKIEJAR=>'c:\cookie.txt' ); curl_setopt_array($ch,$options); $data = curl_exec($ch); if(strpos($data,'??')){ printf("register ok :)\n"); curl_close($ch); return true; }else{ printf("register failed:(\n"); curl_close($ch); return false; } } /* image uploading function */ function uploadImg($uploadimgurl,$filedir,$filetitle,$filedesc) { $ch = curl_init(); $options=array( CURLOPT_COOKIEFILE=>'c:\cookie.txt', CURLOPT_URL=>$uploadimgurl, CURLOPT_RETURNTRANSFER=>1, CURLOPT_POST=>1, CURLOPT_POSTFIELDS=>" 'MAX_FILE_SIZE'='33554432'& 'preview_area_id'='upload_file'& 'editor_area_id'='body'& 'js_function'=''& 'resource_id'=''& 'show_top_part'='no'& 'file_1'=$filedir& 'file_title_1'=$filetitle& 'file_desc_1'=$filedesc " ); curl_setopt_array($ch,$options); $data = curl_exec($ch); if(strpos($data,'??')){ printf("upload ok :)\n"); }else{ printf("upload failed :(\n"); } curl_close($ch); } if(reg($regUrl,$regUser,$regPass,$regMail) != false) { uploadImg($uploadImgUrl,$fileDir,$fileTitle,$fileDesc); } http://www.lyrkjsw.gov.cn/hbcms/user/list_resource.php (list file page) http://www.lyrkjsw.gov.cn/hbcms/user/register.php (register page) http://www.lyrkjsw.gov.cn/hbcms/user/add_resource.php (image uploading page)

    Read the article

  • Becoming a professional programmer / software engineer

    - by Matt
    This isn't strictly about programming, more about being a programmer, so I'm sorry if its not the right kind of question to ask on this forum (mod, please delete if it isn't) I'm a computer tech in the US Army, and once I'm out I'll have eight years on the job. I'm about to start a degree through an online school (the only way I can get the army to pay for it while I'm still in), and I'm seriously looking at getting a computer science degree. I'm great with computers. I can take one apart and put it back together with my eyes closed. I'm A+ and Network+ certified and I'm getting a couple other CompTIA certs before I get out. I can work Windows as well as anyone on this planet and I'm not terrible with Linux. A job in computers is something I've always wanted. But, aside from being a computer technician, it seems that every job in the field requires programming ability. I like programming as a hobby. I programmed TI BASIC in high school and I'm teaching myself Python, but that's as far as my experience goes. That sort of brings me to my questions: I've always heard that the first language is the most difficult, and once you learn it well then all the others sort of fall into place for you. Is that true? Like, if I spend the next eight months mastering Python, will I pretty much be able to pick up at least fair proficiency in any other OO language within a month of studying it or whatever? How easy is it to burn out? the biggest thing I'm afraid of is just burning out on programming. I can go all day long if I'm programming strictly for my own personal desire, but I can imagine it being really easy to burn out after a few years of programming to deadlines and certain specifications. Especially if its a big project involving a dozen different designers. From what I told you about myself, would I already be qualified to work as a regular technician (geek squad type or maybe running a computer repair shop). Is Python a good base to learn from? I've heard that it makes you hate other languages because they feel more convoluted when learning, but also that its a great beginner language. If you're a professional programmer, did you have any of the same fears? Would you recommend that I stick to computer repair and Python rather than try to get into corporate programming? (just from what you've read in this thread, anyway) Thanks for taking the time to read all this and answer (if you did)

    Read the article

  • Linux Device Driver: Symbol "memcpy" not found

    - by Hinton
    Hello, I'm trying to write a Linux device driver. I've got it to work really well, until I tried to use "memcpy". I don't even get a compiler error, when I "make" it just warns me: WARNING: "memcpy" [/root/homedir/sv/main.ko] undefined! OK and when I try to load via insmod, I get on the console: insmod: error inserting './main.ko': -1 Unknown symbol in module and on dmesg: main: Unknown symbol memcpy (err 0) I include the following: #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/init.h> #include <linux/kernel.h> /* printk() */ #include <linux/slab.h> /* kmalloc() */ #include <linux/fs.h> /* everything... */ #include <linux/errno.h> /* error codes */ #include <linux/types.h> /* size_t */ #include <linux/fcntl.h> /* O_ACCMODE */ #include <linux/cdev.h> #include <asm/system.h> /* cli(), *_flags */ #include <asm/uaccess.h> /* copy_*_user */ The function using memcpy: static int dc_copy_to_user(char __user *buf, size_t count, loff_t *f_pos, struct sv_data_dev *dev) { char data[MAX_KEYLEN]; size_t i = 0; /* Copy the bulk as long as there are 10 more bytes to copy */ while (i < (count + MAX_KEYLEN)) { memcpy(data, &dev->data[*f_pos + i], MAX_KEYLEN); ec_block(dev->key, data, MAX_KEYLEN); if (copy_to_user(&buf[i], data, MAX_KEYLEN)) { return -EFAULT; } i += MAX_KEYLEN; } return 0; } Could someone help me? I thought the thing was in linux/string.h, but I get the error just the same. I'm using kernel 2.6.37-rc1 (I'm doing in in user-mode-linux, which works only since 2.6.37-rc1). Any help is greatly appreciated. # Context dependent makefile that can be called directly and will invoke itself # through the kernel module building system. KERNELDIR=/usr/src/linux ifneq ($(KERNELRELEASE),) EXTRA_CFLAGS+=-I $(PWD) -ARCH=um obj-m := main.o else KERNELDIR ?= /lib/modules/$(shell uname -r)/build PWD = $(shell pwd) all: $(MAKE) V=1 ARCH=um -C $(KERNELDIR) M=$(PWD) modules clean: rm -rf Module.symvers .*.cmd *.ko .*.o *.o *.mod.c .tmp_versions *.order endif

    Read the article

  • Would someone mind giving suggestions for this new assembly language?

    - by Noctis Skytower
    Greetings! Last semester in college, my teacher in the Computer Languages class taught us the esoteric language named Whitespace. In the interest of learning the language better with a very busy schedule (midterms), I wrote an interpreter and assembler in Python. An assembly language was designed to facilitate writing programs easily, and a sample program was written with the given assembly mnemonics. Now that it is summer, a new project has begun with the objective being to rewrite the interpreter and assembler for Whitespace 0.3, with further developments coming afterwards. Since there is so much extra time than before to work on its design, you are presented here with an outline that provides a revised set of mnemonics for the assembly language. This post is marked as a wiki for their discussion. Have you ever had any experience with assembly languages in the past? Were there some instructions that you thought should have been renamed to something different? Did you find yourself thinking outside the box and with a different paradigm than in which the mnemonics were named? If you can answer yes to any of those questions, you are most welcome here. Subjective answers are appreciated! hold N Push the number onto the stack copy Duplicate the top item on the stack copy N Copy the nth item on the stack (given by the argument) onto the top of the stack swap Swap the top two items on the stack drop Discard the top item on the stack drop N Slide n items off the stack, keeping the top item add Addition sub Subtraction mul Multiplication div Integer Division mod Modulo save Store load Retrieve L: Mark a location in the program call L Call a subroutine goto L Jump unconditionally to a label if=0 L Jump to a label if the top of the stack is zero if<0 L Jump to a label if the top of the stack is negative return End a subroutine and transfer control back to the caller exit End the program print chr Output the character at the top of the stack print int Output the number at the top of the stack input chr Read a character and place it in the location given by the top of the stack input int Read a number and place it in the location given by the top of the stack Question: How would you redesign, rewrite, or rename the previous mnemonics and for what reasons?

    Read the article

  • Wrong sessionID being used in callback, but only on one particular computer

    - by user210119
    I am writing a Python/Django web application that uses OAuth (for the TwitterAPI, not that it should matter). I am storing a session ID in my login function, and then after using OAuth to get the user's token, I try to retrieve the sessionID in my callback function. The callback function then always fails(throws an exception) because it can't find the OAuth token in the session. Through the debugger, I am able to determine that the session ID that the server is using is incorrect - it does not match the session ID that was stored in the login function. It's therefore unsurprising that the Oauth tokens were not there. The session that appears in the callback was the same one each time (until I tried deleting it - see "things I've tried below"), and it started out as an old session, with some data in it that is from a different django app running on the same server that I hadn't touched in a couple weeks. Here's the kicker: everything I described is an issue only on our production server, and only when connecting to it from my computer. Let me clarify: this only happens with my particular laptop. I can connect to the app just fine from someone else's computer. Other people cannot connect with their accounts on my computer. Furthmore, I can connect just fine to the app when it is running on my localhost using the built-in django webserver, just not to the production server. My setup: my server and local box are running= Django 1.2.0 and Python 2.6.5. My local box is running Snow Leopard and the Django webserver, the server is running Ubuntu, Apache2, and mod-wsgi. For sessions, I am using Django's default session backend (DB). Things I have tried, all to no avail: logging in with a different account, including new accounts that have never OAuthed to this app before Clearing cookies, using incognito mode, using a different web browser on my same computer. Each time, upon inspecting my cookies, the sessionID matched the sessionID in the login function and was different from the sessionID in the callback. deleting the session in the database that appears in the callback function, (the one that appeared to be old data). The callback function still fails, and the sessionID it appears to be using is now a new one using a different session backend (DB-cache, flat file, etc...) restarting the server, my computer, etc. My first question on StackOverflow, so bear with me if I didn't quite follow local conventions. I am just at a loss as to what to even look for - what are the things that could possibly be causing sessions to not work on my particular computer, and (so far!) only my particular computer?

    Read the article

  • RNDC fails: permission denied

    - by pawz
    Named works great. It creates a pid in /var/run/named/named.pid as expected. It is listening on port 953 as shown by the log: Apr 20 14:42:38 guchuko named[9115]: command channel listening on 127.0.0.1#953 But whenever I try to run "rndc reload" I get: rndc: 'reload' failed: permission denied What file is it being denied permission to ? It doesn't log anything so I don't know why it's not working. I've compiled bind 9.4-ESV-R1 from source and I've patched it with the mysql mod. my named.conf: options { directory "/var/bind"; forwarders { 203.82.213.101; 203.188.144.1; }; listen-on-v6 { none; }; listen-on { 127.0.0.1; 192.168.0.6; }; pid-file "/var/run/named/named.pid"; }; logging { channel simple_log { file "/var/log/named.log" versions 3 size 5m; severity debug 5; print-time yes; print-severity yes; print-category yes; }; category default { simple_log; }; }; zone "." IN { type hint; file "named.ca"; }; zone "localhost" IN { type master; file "pri/localhost.zone"; allow-update { none; }; notify no; }; include "/etc/rndc.key" my rndc.conf options { default-server 127.0.0.1; default-key "rndc-key"; }; server 127.0.0.1 { key "rndc-key"; }; include "/etc/rndc.key"; my rndc.key: key "rndc-key" { algorithm hmac-md5; secret "XFc8C+yCLK0mIheTSBj41g=="; };

    Read the article

  • Issue accessing remote Infinispan mbeans

    - by user1960172
    I am able to access the Mbeans by local Jconsole but not able to access the MBEANS from a remote Host. My COnfiguration: <?xml version='1.0' encoding='UTF-8'?> <server xmlns="urn:jboss:domain:1.4"> <extensions> <extension module="org.infinispan.server.endpoint"/> <extension module="org.jboss.as.clustering.infinispan"/> <extension module="org.jboss.as.clustering.jgroups"/> <extension module="org.jboss.as.connector"/> <extension module="org.jboss.as.jdr"/> <extension module="org.jboss.as.jmx"/> <extension module="org.jboss.as.logging"/> <extension module="org.jboss.as.modcluster"/> <extension module="org.jboss.as.naming"/> <extension module="org.jboss.as.remoting"/> <extension module="org.jboss.as.security"/> <extension module="org.jboss.as.threads"/> <extension module="org.jboss.as.transactions"/> <extension module="org.jboss.as.web"/> </extensions> <management> <security-realms> <security-realm name="ManagementRealm"> <authentication> <local default-user="$local"/> <properties path="mgmt-users.properties" relative-to="jboss.server.config.dir"/> </authentication> </security-realm> <security-realm name="ApplicationRealm"> <authentication> <local default-user="$local" allowed-users="*"/> <properties path="application-users.properties" relative-to="jboss.server.config.dir"/> </authentication> </security-realm> </security-realms> <management-interfaces> <native-interface security-realm="ManagementRealm"> <socket-binding native="management-native"/> </native-interface> <http-interface security-realm="ManagementRealm"> <socket-binding http="management-http"/> </http-interface> </management-interfaces> </management> <profile> <subsystem xmlns="urn:jboss:domain:logging:1.2"> <console-handler name="CONSOLE"> <level name="INFO"/> <formatter> <pattern-formatter pattern="%K{level}%d{HH:mm:ss,SSS} %-5p [%c] (%t) %s%E%n"/> </formatter> </console-handler> <periodic-rotating-file-handler name="FILE" autoflush="true"> <formatter> <pattern-formatter pattern="%d{HH:mm:ss,SSS} %-5p [%c] (%t) %s%E%n"/> </formatter> <file relative-to="jboss.server.log.dir" path="server.log"/> <suffix value=".yyyy-MM-dd"/> <append value="true"/> </periodic-rotating-file-handler> <logger category="com.arjuna"> <level name="WARN"/> </logger> <logger category="org.apache.tomcat.util.modeler"> <level name="WARN"/> </logger> <logger category="org.jboss.as.config"> <level name="DEBUG"/> </logger> <logger category="sun.rmi"> <level name="WARN"/> </logger> <logger category="jacorb"> <level name="WARN"/> </logger> <logger category="jacorb.config"> <level name="ERROR"/> </logger> <root-logger> <level name="INFO"/> <handlers> <handler name="CONSOLE"/> <handler name="FILE"/> </handlers> </root-logger> </subsystem> <subsystem xmlns="urn:infinispan:server:endpoint:6.0"> <hotrod-connector socket-binding="hotrod" cache-container="clustered"> <topology-state-transfer lazy-retrieval="false" lock-timeout="1000" replication-timeout="5000"/> </hotrod-connector> <memcached-connector socket-binding="memcached" cache-container="clustered"/> <!--<rest-connector virtual-server="default-host" cache-container="clustered" security-domain="other" auth-method="BASIC"/> --> <rest-connector virtual-server="default-host" cache-container="clustered" /> <websocket-connector socket-binding="websocket" cache-container="clustered"/> </subsystem> <subsystem xmlns="urn:jboss:domain:datasources:1.1"> <datasources/> </subsystem> <subsystem xmlns="urn:infinispan:server:core:5.3" default-cache-container="clustered"> <cache-container name="clustered" default-cache="default"> <transport executor="infinispan-transport" lock-timeout="60000"/> <distributed-cache name="default" mode="SYNC" segments="20" owners="2" remote-timeout="30000" start="EAGER"> <locking isolation="READ_COMMITTED" acquire-timeout="30000" concurrency-level="1000" striping="false"/> <transaction mode="NONE"/> </distributed-cache> <distributed-cache name="memcachedCache" mode="SYNC" segments="20" owners="2" remote-timeout="30000" start="EAGER"> <locking isolation="READ_COMMITTED" acquire-timeout="30000" concurrency-level="1000" striping="false"/> <transaction mode="NONE"/> </distributed-cache> <distributed-cache name="namedCache" mode="SYNC" start="EAGER"/> </cache-container> <cache-container name="security"/> </subsystem> <subsystem xmlns="urn:jboss:domain:jca:1.1"> <archive-validation enabled="true" fail-on-error="true" fail-on-warn="false"/> <bean-validation enabled="true"/> <default-workmanager> <short-running-threads> <core-threads count="50"/> <queue-length count="50"/> <max-threads count="50"/> <keepalive-time time="10" unit="seconds"/> </short-running-threads> <long-running-threads> <core-threads count="50"/> <queue-length count="50"/> <max-threads count="50"/> <keepalive-time time="10" unit="seconds"/> </long-running-threads> </default-workmanager> <cached-connection-manager/> </subsystem> <subsystem xmlns="urn:jboss:domain:jdr:1.0"/> <subsystem xmlns="urn:jboss:domain:jgroups:1.2" default-stack="${jboss.default.jgroups.stack:udp}"> <stack name="udp"> <transport type="UDP" socket-binding="jgroups-udp"/> <protocol type="PING"/> <protocol type="MERGE2"/> <protocol type="FD_SOCK" socket-binding="jgroups-udp-fd"/> <protocol type="FD_ALL"/> <protocol type="pbcast.NAKACK"/> <protocol type="UNICAST2"/> <protocol type="pbcast.STABLE"/> <protocol type="pbcast.GMS"/> <protocol type="UFC"/> <protocol type="MFC"/> <protocol type="FRAG2"/> <protocol type="RSVP"/> </stack> <stack name="tcp"> <transport type="TCP" socket-binding="jgroups-tcp"/> <!--<protocol type="MPING" socket-binding="jgroups-mping"/>--> <protocol type="TCPPING"> <property name="initial_hosts">10.32.50.53[7600],10.32.50.64[7600]</property> </protocol> <protocol type="MERGE2"/> <protocol type="FD_SOCK" socket-binding="jgroups-tcp-fd"/> <protocol type="FD"/> <protocol type="VERIFY_SUSPECT"/> <protocol type="pbcast.NAKACK"> <property name="use_mcast_xmit">false</property> </protocol> <protocol type="UNICAST2"/> <protocol type="pbcast.STABLE"/> <protocol type="pbcast.GMS"/> <protocol type="UFC"/> <protocol type="MFC"/> <protocol type="FRAG2"/> <protocol type="RSVP"/> </stack> </subsystem> <subsystem xmlns="urn:jboss:domain:jmx:1.1"> <show-model value="true"/> <remoting-connector use-management-endpoint="false"/> </subsystem> <subsystem xmlns="urn:jboss:domain:modcluster:1.1"> <mod-cluster-config advertise-socket="modcluster" connector="ajp" excluded-contexts="console"> <dynamic-load-provider> <load-metric type="busyness"/> </dynamic-load-provider> </mod-cluster-config> </subsystem> <subsystem xmlns="urn:jboss:domain:naming:1.2"/> <subsystem xmlns="urn:jboss:domain:remoting:1.1"> <connector name="remoting-connector" socket-binding="remoting" security-realm="ApplicationRealm"/> </subsystem> <subsystem xmlns="urn:jboss:domain:security:1.2"> <security-domains> <security-domain name="other" cache-type="infinispan"> <authentication> <login-module code="Remoting" flag="optional"> <module-option name="password-stacking" value="useFirstPass"/> </login-module> <login-module code="RealmUsersRoles" flag="required"> <module-option name="usersProperties" value="${jboss.server.config.dir}/application-users.properties"/> <module-option name="rolesProperties" value="${jboss.server.config.dir}/application-roles.properties"/> <module-option name="realm" value="ApplicationRealm"/> <module-option name="password-stacking" value="useFirstPass"/> </login-module> </authentication> </security-domain> <security-domain name="jboss-web-policy" cache-type="infinispan"> <authorization> <policy-module code="Delegating" flag="required"/> </authorization> </security-domain> </security-domains> </subsystem> <subsystem xmlns="urn:jboss:domain:threads:1.1"> <thread-factory name="infinispan-factory" group-name="infinispan" priority="5"/> <unbounded-queue-thread-pool name="infinispan-transport"> <max-threads count="25"/> <keepalive-time time="0" unit="milliseconds"/> <thread-factory name="infinispan-factory"/> </unbounded-queue-thread-pool> </subsystem> <subsystem xmlns="urn:jboss:domain:transactions:1.2"> <core-environment> <process-id> <uuid/> </process-id> </core-environment> <recovery-environment socket-binding="txn-recovery-environment" status-socket-binding="txn-status-manager"/> <coordinator-environment default-timeout="300"/> </subsystem> <subsystem xmlns="urn:jboss:domain:web:1.1" default-virtual-server="default-host" native="false"> <connector name="http" protocol="HTTP/1.1" scheme="http" socket-binding="http"/> <connector name="ajp" protocol="AJP/1.3" scheme="http" socket-binding="ajp"/> <virtual-server name="default-host" enable-welcome-root="false"> <alias name="localhost"/> <alias name="example.com"/> </virtual-server> </subsystem> </profile> <interfaces> <interface name="management"> <inet-address value="${jboss.bind.address.management:10.32.222.111}"/> </interface> <interface name="public"> <inet-address value="${jboss.bind.address:10.32.222.111}"/> </interface> </interfaces> <socket-binding-group name="standard-sockets" default-interface="public" port-offset="${jboss.socket.binding.port-offset:0}"> <socket-binding name="management-native" interface="management" port="${jboss.management.native.port:9999}"/> <socket-binding name="management-http" interface="management" port="${jboss.management.http.port:9990}"/> <socket-binding name="management-https" interface="management" port="${jboss.management.https.port:9443}"/> <socket-binding name="ajp" port="8089"/> <socket-binding name="hotrod" port="11222"/> <socket-binding name="http" port="8080"/> <socket-binding name="https" port="8443"/> <socket-binding name="jgroups-mping" port="0" multicast-address="${jboss.default.multicast.address:234.99.54.14}" multicast-port="45700"/> <socket-binding name="jgroups-tcp" port="7600"/> <socket-binding name="jgroups-tcp-fd" port="57600"/> <socket-binding name="jgroups-udp" port="55200" multicast-address="${jboss.default.multicast.address:234.99.54.14}" multicast-port="45688"/> <socket-binding name="jgroups-udp-fd" port="54200"/> <socket-binding name="memcached" port="11211"/> <socket-binding name="modcluster" port="0" multicast-address="224.0.1.115" multicast-port="23364"/> <socket-binding name="remoting" port="4447"/> <socket-binding name="txn-recovery-environment" port="4712"/> <socket-binding name="txn-status-manager" port="4713"/> <socket-binding name="websocket" port="8181"/> </socket-binding-group> </server> Remote Process: service:jmx:remoting-jmx://10.32.222.111:4447 I added user to both management and application realm admin=2a0923285184943425d1f53ddd58ec7a test=2b1be81e1da41d4ea647bd82fc8c2bc9 But when i try to connect its says's: Connection failed: Retry When i use Remote process as:10.32.222.111:4447 on the sever it prompts a warning : 16:29:48,084 ERROR [org.jboss.remoting.remote.connection] (Remoting "djd7w4r1" read-1) JBREM000200: Remote connection failed: java.io.IOException: Received an invali d message length of -2140864253 Also disabled Remote authentication: -Dcom.sun.management.jmxremote -Dcom.sun.management.jmxremote.ssl=false -Dcom.sun.management.jmxremote.authenticate=false -Dcom.sun.management.jmxremote.port=12345 Still not able to connect. Any help will be highly appreciated . Thanks

    Read the article

  • USB windows xp final USB access issues

    - by Lex Dean
    I basically understand you C++ people, Please do not get distracted because I'm writing in Delphi. I have a stable USB Listing method that accesses all my USB devices I get the devicepath, and this structure: TSPDevInfoData = packed record Size: DWORD; ClassGuid: TGUID; DevInst: DWORD; // DEVINST handle Reserved: DWord; end; I get my ProductID and VenderID successfully from my DevicePath Lists all USB devices connected to the computer at the time That enables me to access the registry data to each device in a stable way. What I'm lacking is a little direction Is friendly name able to be written inside the connected USB Micro chips by the firmware programmer? (I'm thinking of this to identify the device even further, or is this to help identify Bulk data transfer devices like memory sticks and camera's) Can I use SPDRP_REMOVAL_POLICY_OVERRIDE to some how reset these polices What else can I do with the registry details. Identifying when some one unplugs a device The program is using (in windows XP standard) I used a documented windows event that did not respond. Can I read a registry value to identify if its still connected? using CreateFileA (DevicePath) to send and receive data I have read when some one unplugs in the middle of a data transfer its difficult clearing resources. what can IoCreateDevice do for me and how does one use it for that task This two way point of connection status and system lock up situations is very concerning. Has some one read anything about this subject recently? My objectives are to 1. list connected USB devices identify a in development Micro Controller from everything else send and receive data in a stable and fast way to the limits of the controller No lock up's transferring data Note I'm not using any service packs I understand everything USB is in ANSI when windows xp is not and .Net is all about ANSI (what a waste of memory) I plan to continue this project into a .net at a later date as an addition. MSDN gives me Structures and Functions and what should link to what ok but say little to what they get used for. What is available in my language Delphi is way over priced that it needs a major price drop.

    Read the article

  • How can I set an image for background of GUI interface?

    - by enriched
    hey everyone, im having some troubles displaying the background image for a GUI interface in java. Here is what i have at the moment, and with current stage of code it shows default(gray) background. import javax.swing.*; import java.awt.event.*; import java.util.Scanner; import java.awt.*; import java.io.File; import javax.imageio.ImageIO; import java.awt.image.BufferedImage; import java.io.IOException; ////////////////////////////////// // 3nriched Games Presents: // // MIPS The Mouse!! // ////////////////////////////////// public class mipsMouseGUI extends JFrame implements ActionListener { private static String ThePDub = ("mouse"); //the password JPasswordField pass; JPanel panel; JButton btnEnter; JLabel lblpdub; public mipsMouseGUI() { BufferedImage image = null; try { //attempts to read picture from the folder image = ImageIO.read(getClass().getResource("/mousepics/mousepic.png")); } catch (IOException e) { //catches exceptions e.printStackTrace(); } ImagePanel panel = new ImagePanel(new ImageIcon("/mousepics/neonglowOnwill.png").getImage()); setIconImage(image); //sets icon picture setTitle("Mips The Mouse Login"); setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); pass = new JPasswordField(5); //sets password length to 5 pass.setEchoChar('@'); //hide characters as @ symbol pass.addActionListener(this); //adds action listener add(panel); //adds panel to frame btnEnter = new JButton("Enter"); //creates a button btnEnter.addActionListener(this);// Register the action listener. lblpdub = new JLabel(" Your Password: "); // label that says enter password panel.add(lblpdub, BorderLayout.CENTER);// adds label and inputbox panel.add(pass, BorderLayout.CENTER); // to panel and sets location panel.add(btnEnter, BorderLayout.CENTER); //adds button to panel pack(); // packs controls and setLocationRelativeTo(null); // Implicit "this" if inside JFrame constructor. setVisible(true);// makes them visible (duh) } public void actionPerformed(ActionEvent a) { Object source = a.getSource(); //char array that holds password char[] passy = pass.getPassword(); //characters array to string String p = new String(passy); //determines if user entered correct password if(p.equals(ThePDub)) { JOptionPane.showMessageDialog(null, "Welcome beta user: USERNAME."); } else JOptionPane.showMessageDialog(null, "You have enter an incorrect password. Please try again."); } public class ImagePanel extends JPanel { private BufferedImage img; public ImagePanel(String img) { this(new ImageIcon(img).getImage()); } public ImagePanel(Image img) { Dimension size = new Dimension(img.getWidth(null), img.getHeight(null)); } public void paintComponent(Graphics g) { g.drawImage(img, 0, 0, null); } } }

    Read the article

  • How to setup Lucene/Solr for a B2B web app?

    - by Bill Paetzke
    Given: 1 database per client (business customer) 5000 clients Clients have between 2 to 2000 users (avg is ~100 users/client) 100k to 10 million records per database Users need to search those records often (it's the best way to navigate their data) Possibly relevant info: Several new clients each week (any time during business hours) Multiple web servers and database servers (users can login via any web server) Let's stay agnostic of language or sql brand, since Lucene (and Solr) have a breadth of support For Example: Joel Spolsky said in Podcast #11 that his hosted web app product, FogBugz On-Demand, uses Lucene. He has thousands of on-demand clients. And each client gets their own database. They use an index per client and store it in the client's database. I'm not sure on the details. And I'm not sure if this is a serious mod to Lucene. The Question: How would you setup Lucene search so that each client can only search within its database? How would you setup the index(es)? Where do you store the index(es)? Would you need to add a filter to all search queries? If a client cancelled, how would you delete their (part of the) index? (this may be trivial--not sure yet) Possible Solutions: Make an index for each client (database) Pro: Search is faster (than one-index-for-all method). Indices are relative to the size of the client's data. Con: I'm not sure what this entails, nor do I know if this is beyond Lucene's scope. Have a single, gigantic index with a database_name field. Always include database_name as a filter. Pro: Not sure. Maybe good for tech support or billing dept to search all databases for info. Con: Search is slower (than index-per-client method). Flawed security if query filter removed. One last thing: I would also accept an answer that uses Solr (the extension of Lucene). Perhaps it's better suited for this problem. Not sure.

    Read the article

  • 'Scanner' does not name a type error in g++

    - by Max
    Hi. I'm trying to compile code in g++ and I get the following errors: In file included from scanner.hpp:8, from scanner.cpp:5: parser.hpp:14: error: ‘Scanner’ does not name a type parser.hpp:15: error: ‘Token’ does not name a type Here's my g++ command: g++ parser.cpp scanner.cpp -Wall Here's parser.hpp: #ifndef PARSER_HPP #define PARSER_HPP #include <string> #include <map> #include "scanner.hpp" using std::string; class Parser { // Member Variables private: Scanner lex; // Lexical analyzer Token look; // tracks the current lookahead token // Member Functions <some function declarations> }; #endif and here's scanner.hpp: #ifndef SCANNER_HPP #define SCANNER_HPP #include <iostream> #include <cctype> #include <string> #include <map> #include "parser.hpp" using std::string; using std::map; enum { // reserved words BOOL, ELSE, IF, TRUE, WHILE, DO, FALSE, INT, VOID, // punctuation and operators LPAREN, RPAREN, LBRACK, RBRACK, LBRACE, RBRACE, SEMI, COMMA, PLUS, MINUS, TIMES, DIV, MOD, AND, OR, NOT, IS, ADDR, EQ, NE, LT, GT, LE, GE, // symbolic constants NUM, ID, ENDFILE, ERROR }; class Token { public: int tag; int value; string lexeme; Token() {tag = 0;} Token(int t) {tag = t;} }; class Num : public Token { public: Num(int v) {tag = NUM; value = v;} }; class Word : public Token { public: Word() {tag = 0; lexeme = "default";} Word(int t, string l) {tag = t; lexeme = l;} }; class Scanner { private: int line; // which line the compiler is currently on int depth; // how deep in the parse tree the compiler is map<string,Word> words; // list of reserved words and used identifiers // Member Functions public: Scanner(); Token scan(); string printTag(int); friend class Parser; }; #endif anyone see the problem? I feel like I'm missing something incredibly obvious.

    Read the article

  • Unable to use getInt() but able to use getString() for a sqlite database

    - by mwrazam
    I am using a cursor to access a sqlite database I have in my app. I am having trouble using the .getInt() on my database. My database is pre-created, and I have a few cursors that perform queries to interface with the information. Several of the columns in one of the tables are set as INTEGER type. I realize that sqlite has no built in check to make sure columns are indeed INT. However, when retrieving the data, I can use the .getString() function without any issues, but calling .getInt() causes the app to crash. Below is the relevant code. If I am missing anything, please let me know, and I'll add it in. Any help is greatly appreciated. Thank you very much. Cursor: public Cursor getSkitStats(int module, int skit) { Cursor mCursor = myDataBase.rawQuery("SELECT * FROM score WHERE mod="+module+" AND skit="+skit+"", null); if (mCursor != null) { mCursor.moveToFirst(); } return mCursor; } and I am using a simple Toast call to output the result of the query: Toast.makeText(getApplicationContext(), scoreContent.getInt(0), Toast.LENGTH_SHORT).show(); The variable scoreContent is the cursor. And here is the crash output: 07-08 23:53:31.726: E/AndroidRuntime(15685): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:1659) 07-08 23:53:31.726: E/AndroidRuntime(15685): at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:1675) 07-08 23:53:31.726: E/AndroidRuntime(15685): at android.app.ActivityThread.access$1500(ActivityThread.java:121) 07-08 23:53:31.726: E/AndroidRuntime(15685): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:943) 07-08 23:53:31.726: E/AndroidRuntime(15685): at android.os.Handler.dispatchMessage(Handler.java:99) 07-08 23:53:31.726: E/AndroidRuntime(15685): at android.os.Looper.loop(Looper.java:130) 07-08 23:53:31.726: E/AndroidRuntime(15685): at android.app.ActivityThread.main(ActivityThread.java:3701) 07-08 23:53:31.726: E/AndroidRuntime(15685): at java.lang.reflect.Method.invokeNative(Native Method) 07-08 23:53:31.726: E/AndroidRuntime(15685): at java.lang.reflect.Method.invoke(Method.java:507) 07-08 23:53:31.726: E/AndroidRuntime(15685): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:866) 07-08 23:53:31.726: E/AndroidRuntime(15685): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:624) 07-08 23:53:31.726: E/AndroidRuntime(15685): at dalvik.system.NativeStart.main(Native Method) 07-08 23:53:31.726: E/AndroidRuntime(15685): Caused by: android.content.res.Resources$NotFoundException: String resource ID #0x2 07-08 23:53:31.726: E/AndroidRuntime(15685): at android.content.res.Resources.getText(Resources.java:205) 07-08 23:53:31.726: E/AndroidRuntime(15685): at android.widget.Toast.makeText(Toast.java:258) 07-08 23:53:31.726: E/AndroidRuntime(15685): at jp.atomicideas.ne.Summary.onCreate(Summary.java:90) 07-08 23:53:31.726: E/AndroidRuntime(15685): at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1047) 07-08 23:53:31.726: E/AndroidRuntime(15685): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:1623) 07-08 23:53:31.726: E/AndroidRuntime(15685): ... 11 more

    Read the article

  • [C] Programming problem: Storing values of an array in one variable

    - by OldMacDonald
    Hello, I am trying to use md5 code to calculate checksums of file. Now the given function prints out the (previously calculated) checksum on screen, but I want to store it in a variable, to be able to compare it later on. I guess the main problem is that I want to store the content of an array in one variable. How can I manage that? Probably this is a very stupid question, but maybe somone can help. Below is the function to print out the value. I want to modify it to store the result in one variable. static void MDPrint (mdContext) MD5_CTX *mdContext; { int i; for (i = 0; i < 16; i++) { printf ("%02x", mdContext->digest[i]); } // end of for } // end of function For reasons of completeness the used struct: /* typedef a 32 bit type */ typedef unsigned long int UINT4; /* Data structure for MD5 (Message Digest) computation */ typedef struct { UINT4 i[2]; /* number of _bits_ handled mod 2^64 */ UINT4 buf[4]; /* scratch buffer */ unsigned char in[64]; /* input buffer */ unsigned char digest[16]; /* actual digest after MD5Final call */ } MD5_CTX; and the used function to calculate the checksum: static int MDFile (filename) char *filename; { FILE *inFile = fopen (filename, "rb"); MD5_CTX mdContext; int bytes; unsigned char data[1024]; if (inFile == NULL) { printf ("%s can't be opened.\n", filename); return -1; } // end of if MD5Init (&mdContext); while ((bytes = fread (data, 1, 1024, inFile)) != 0) MD5Update (&mdContext, data, bytes); MD5Final (&mdContext); MDPrint (&mdContext); printf (" %s\n", filename); fclose (inFile); return 0; }

    Read the article

  • Parameter pack argument consumption

    - by yuri kilochek
    It is possible to get the first element of the parameter pack like this template <typename... Elements> struct type_list { }; template <typename TypeList> struct type_list_first_element { }; template <typename FirstElement, typename... OtherElements> struct type_list_first_element<type_list<FirstElement, OtherElements...>> { typedef FirstElement type; }; int main() { typedef type_list<int, float, char> list; typedef type_list_first_element<list>::type element; return 0; } but not possible to similary get the last element like this template <typename... Elements> struct type_list { }; template <typename TypeList> struct type_list_last_element { }; template <typename LastElement, typename... OtherElements> struct type_list_last_element<type_list<OtherElements..., LastElement>> { typedef LastElement type; }; int main() { typedef type_list<int, float, char> list; typedef type_list_last_element<list>::type element; return 0; } with gcc 4.7.1 complaining: error: 'type' in 'struct type_list_last_element<type_list<int, float, char>>' does not name a type What paragraps from the standard describe this behaviour? It seems to me that template parameter packs are greedy in a sense that they consume all matching arguments, which in this case means that OtherElements consumes all three arguments (int, float and char) and then there is nothing left for LastElement so the compilation fails. Am i correct in the assumption? EDIT: To clarify: I am not asking how to extract the last element from the parameter pack, i know how to do that. What i actually want is to pick the pack apart from the back as opposed to the front, and as such recursing all the way to the back for each element would be ineffective. Apparentely reversing the sequence beforehand is the most sensible choice.

    Read the article

  • SCOM 2012 DNS Forwarder Availability Monitor

    - by Massimo
    Background: I have an environment with two different AD domains, each in its own forest, each with two Windows Server 2008 R2 domain controllers acting as DNS servers. There is no trust between the domains. Each DNS server manages the main DNS zone for its AD domain, and then some other zones, including the reverse lookup zone for its IP subnets; all zones are AD-integrated; all DNS servers which manages a zone are correctly listed as authoritative name servers for that zone. So, the situation is like this (using fake names and IP addresses): Domain A: DNS domain: a.dom IP subnet: 192.168.1.X DC/DNS Servers: serverA1.a.dom (192.168.1.1) and serverA2.a.dom (192.168.1.2) Authoritative zones: a.dom, 1.168.192.in-addr.arpa, somezone.local Domain B: DNS domain: b.dom IP subnet: 10.0.0.X DC/DNS Servers: serverB1.b.dom (10.0.0.1) and serverB2.b.dom (10.0.0.2) Authoritative zones: b.dom, 0.0.10.in-addr.arpa, someotherzone.local DNS servers in domain A have conditional forwarders defined for each zone managed by DNS servers in domain B, forwarding to both domain B's DNS servers; DNS servers in domain B have the opposite configuration. All forwarders are stored in Active Directory. All is working perfectly, and computers in each domain can resolve forward and reverse DNS queries for both domains, using their domain's DNS servers. The problem: I have SCOM 2012 deployed in domain A, with the SCOM agent installed on both DCs; the management packs for Active Directory and DNS Server are installed and up-to-date. I have a series of alerts like the following ones on both domain controllers; each alert is generated for each forwarded zone and for each forwarded server: Forwarder someotherzone.local (10.0.0.1) cannot resolve the host name 192.168.1.1,someotherzone.local for serverA1.a.dom Forwarder someotherzone.local (10.0.0.2) cannot resolve the host name 192.168.1.1,someotherzone.local for serverA1.a.dom Forwarder someotherzone.local (10.0.0.1) cannot resolve the host name 192.168.1.2,someotherzone.local for serverA2.a.dom Forwarder someotherzone.local (10.0.0.2) cannot resolve the host name 192.168.1.2,someotherzone.local for serverA2.a.dom Forwarder 0.0.10.in-addr.arpa (10.0.0.1) cannot resolve the host name 192.168.1.1,0.0.10.in-addr.arpa for serverA1.a.dom Forwarder 0.0.10.in-addr.arpa (10.0.0.2) cannot resolve the host name 192.168.1.1,0.0.10.in-addr.arpa for serverA1.a.dom Forwarder 0.0.10.in-addr.arpa (10.0.0.1) cannot resolve the host name 192.168.1.2,0.0.10.in-addr.arpa for serverA2.a.dom Forwarder 0.0.10.in-addr.arpa (10.0.0.2) cannot resolve the host name 192.168.1.2,0.0.10.in-addr.arpa for serverA2.a.dom The only exception is the main AD DNS zone managed by domain B's DNS servers (b.dom): for that conditional forwarder, no alert is generated and the forwarder availability monitor is green. Ok, what does this mean? What are those monitors trying to tell me? What are they checking? What's actually wrong? And why there is no error for the "b.dom" zone, which is configured in the exact same way as the other ones, both as a zone in domain B's DNS servers and as a forwarder in domain A's DNS servers?

    Read the article

  • Windows XP - Security Update for Windows XP (KB923561) (KB946648) (KB956572) (KB958644)

    - by leeand00
    My father's computer has Windows XP, but when I try to install the service packs it always fails. What gives? Here are the errors that I get in the event log: Date: 2/6/2010 Time: 12:02:18 AM Type: Error User: N/A Computer: EVO Source: Windows Update Agent Category: Installation Event ID: 20 Installation Failure: Windows failed to install the following update with error 0x80070002: Security Update for Windows XP (KB946648). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. 0000: 57 69 6e 33 32 48 52 65 Win32HRe 0008: 73 75 6c 74 3d 30 78 38 sult=0x8 0010: 30 30 37 30 30 30 32 20 0070002 0018: 55 70 64 61 74 65 49 44 UpdateID 0020: 3d 7b 38 33 44 31 41 44 ={83D1AD 0028: 46 35 2d 37 37 39 44 2d F5-779D- 0030: 34 30 31 36 2d 38 43 33 4016-8C3 0038: 31 2d 35 34 39 32 37 30 1-549270 0040: 46 36 37 42 33 46 7d 20 F67B3F} 0048: 52 65 76 69 73 69 6f 6e Revision 0050: 4e 75 6d 62 65 72 3d 31 Number=1 0058: 30 34 20 00 04 . Date: 2/6/2010 Time: 12:02:18 AM Type: Error User: N/A Computer: EVO Source: Windows Update Agent Catagory: Installation Event ID: 20 Installation Failure: Windows failed to install the following update with error 0x80070002: Security Update for Windows XP (KB956572). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. 0000: 57 69 6e 33 32 48 52 65 Win32HRe 0008: 73 75 6c 74 3d 30 78 38 sult=0x8 0010: 30 30 37 30 30 30 32 20 0070002 0018: 55 70 64 61 74 65 49 44 UpdateID 0020: 3d 7b 44 46 32 46 30 41 ={DF2F0A 0028: 39 38 2d 36 45 33 35 2d 98-6E35- 0030: 34 33 37 39 2d 41 42 33 4379-AB3 0038: 33 2d 41 30 33 30 33 45 3-A0303E 0040: 46 37 34 42 32 41 7d 20 F74B2A} 0048: 52 65 76 69 73 69 6f 6e Revision 0050: 4e 75 6d 62 65 72 3d 31 Number=1 0058: 30 32 20 00 02 . Date: 2/6/2010 Time: 12:02:18 AM Type: Error User: N/A Computer EVO Source: Windows Update Agent Event ID: 20 Installation Failure: Windows failed to install the following update with error 0x80070002: Security Update for Windows XP (KB958644). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. 0000: 57 69 6e 33 32 48 52 65 Win32HRe 0008: 73 75 6c 74 3d 30 78 38 sult=0x8 0010: 30 30 37 30 30 30 32 20 0070002 0018: 55 70 64 61 74 65 49 44 UpdateID 0020: 3d 7b 39 33 39 37 41 32 ={9397A2 0028: 31 46 2d 32 34 36 43 2d 1F-246C- 0030: 34 35 33 42 2d 41 43 30 453B-AC0 0038: 35 2d 36 35 42 46 34 46 5-65BF4F 0040: 43 36 42 36 38 42 7d 20 C6B68B} 0048: 52 65 76 69 73 69 6f 6e Revision 0050: 4e 75 6d 62 65 72 3d 31 Number=1 0058: 30 31 20 00 01 . Date: 2/6/2010 Time: 12:02:18 AM Type: Error User: N/A Computer: EVO Source: Windows Update Agent Category: Installation Event ID: 20 Installation Failure: Windows failed to install the following update with error 0x80070002: Security Update for Windows XP (KB923561). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. 0000: 57 69 6e 33 32 48 52 65 Win32HRe 0008: 73 75 6c 74 3d 30 78 38 sult=0x8 0010: 30 30 37 30 30 30 32 20 0070002 0018: 55 70 64 61 74 65 49 44 UpdateID 0020: 3d 7b 33 31 30 41 34 43 ={310A4C 0028: 30 38 2d 35 39 33 44 2d 08-593D- 0030: 34 31 41 33 2d 42 42 35 41A3-BB5 0038: 37 2d 38 33 42 33 38 36 7-83B386 0040: 44 37 37 33 42 35 7d 20 D773B5} 0048: 52 65 76 69 73 69 6f 6e Revision 0050: 4e 75 6d 62 65 72 3d 31 Number=1 0058: 30 33 20 00 03 . Thank you, Andrew

    Read the article

  • Long pause when accessing DFS namespace

    - by Matt
    We've recently migrated our Windows network to use DFS for shared files. DFS is working well, except for one annoying problem: users experience a significant delay when they try to access a DFS namespace that they have not accessed for some time. I have tried to troubleshoot the issue but have not had any success so far, and I was hoping someone here may have some pointers to help resolve the problem. Firstly, some background on our network: The network uses a Windows 2008 functional level Active Directory domain with two Windows 2008 DCs and two DNS servers (one on each of the DCs). The network is DNS only - no WINS. All computers are located at the same site and connected by Gigabit Ethernet. We have approximately 20 Domain-based DFS namespaces in Windows 2008 mode, and each DFS namespace has two Windows 2008 DFS namespace servers (the same two servers for all namespaces). All namespace servers are in FQDN mode and all folder targets are specified using their FQDN. All computers are up-to-date with Service Packs and patches. The actual folder targets (i.e. the SMB shares our DFS folders point to) are scattered across several file and application servers, all running Windows 2008 bar two application servers which run Windows 2003 R2, with no replication setup at all (e.g. all DFS folders currently only have one folder target). Some more detail on the problem: The namespace access delay is generally 1 - 10 seconds long and seems to occur when a particular computer has not accessed the requested namespace for approximately five minutes or more. For example, if the user has not accessed \\domain.name\namespace1\ for more than five minutes and attempts to access \\domain.name\namespace1\ via Windows Explorer, the Explorer window will freeze for 1 - 10 seconds before finally resuming and displaying the folders that exist in \\domain.name\namespace1. If they then close the Explorer window and attempt to access \\domain.name\namespace1\ again within five minutes the contents will be displayed almost instantly - if they wait longer than five minutes it will go through the 1 - 10 second pause again. Once "inside" the namespace everything is nice and snappy, it's just the initial connection to the namespace that is slow. The browsing delays seem to affect all variants of Windows that we use (Windows 2008 x64 SP2, Windows 2003 R2 x86 SP2, Windows XP Pro x86 SP3) - it is possibly a bit worse in Windows XP / 2003 than in Windows 2008, but I'm not sure if the difference isn't just psychological. Accessing the underlying folder targets directly exhibits no delay at all - i.e. if the SMB shares pointed to by DFS are accessed directly (bypassing DFS) then there is no pause. During trouble-shooting I noticed that the "Cache duration" for all of our DFS roots is set to 300 seconds - 5 minutes. Given that this is the same amount of time required to trigger the pause I assume that this caching is somehow related, although I am unsure exactly what is cached on the client and hence what needs to be looked up again after 5 minutes have elapsed. In trying to resolve the problem I have already tried / checked the following (without success): Run dcdiag on both Domain Controllers - no problems found Done some basic DNS server checks without finding any problems - I don't know how to check the DNS servers in detail, but I would add that the network is not exhibiting any other strange behavior that may point to a DNS problem Disabled Anti-virus on clients and servers Removing one of the namespace servers from a couple of namespaces - no difference So that's where I'm up to - and I'm out of ideas. Can anyone suggest what may be causing the delays and/or what I should be trying next?

    Read the article

  • Does likewise-open > version 5.4 contain CIFS support?

    - by Ben Andken
    I'm trying to get the CIFS server working in likewise-open. I've found this set of instructions and everything seems to work until I try to connect ([url]http://www.likewise.com/resources/documentation_library/manuals/cifs/likewise-cifs-smb-file-server-guide.html#id2765992):[/url] 1.6. Build and Configure a Standalone Likewise-CIFS Server This section demonstrates how to build and configure a standalone instance of Likewise-CIFS from the command line. The following procedure assumes that you want to set up Likewise-CIFS on a Linux server to share files with Windows computers in a network without Active Directory. This procedure also assumes you know how to build Linux applications from their source code and then install them. Download Likewise-CIFS from its open source git location: $ git clone git://git.likewiseopen.org/ Download, build, and install the following tools. The tools listed are known to work, but earlier or later versions might work as well. Also, instead of downloading the tools, you might be able to install them on your platform with apt-get or some other means. http://ftp.gnu.org/gnu/autoconf/autoconf-2.65.tar.gz http://ftp.gnu.org/gnu/automake/automake-1.9.6.tar.gz http://ftp.gnu.org/gnu/libtool/libtool-2.2.6a.tar.gz http://pkgconfig.freedesktop.org/releases/pkg-config-0.23.tar.gz gcc --version 3.x or greater Build Likewise-CIFS: $ cd likewise-open $ build/mkcomp --debug all Install Likewise-CIFS: $ sudo su $ cd staging/install-root $ tar cf - . | (cd / && tar xvf -) Make sure Samba is not running: $ /etc/init.d/smb stop Make sure SELinux is either disabled or set to permissive. Make sure the ports required by Likewise are open. For a list of ports that Likewise uses, see the Likewise Open Installation and Administration Guide. Configure Likewise Open: $ /etc/init.d/lwsmd start $ for i in /etc/likewise/*.reg; do /opt/likewise/bin/lwregshell upgrade $i; done $ /etc/init.d/lwsmd stop $ /etc/init.d/lwsmd start $ /opt/likewise/bin/lwsm start srvsvc $ /opt/likewise/bin/domainjoin-cli configure --enable nsswitch Add a user account to the local Likewise provider database. In the following example, substitute the account name that you want for newuser. $ /opt/likewise/bin/lw-add-user --home /home/newuser --shell /bin/bash newuser Successfully added user newuser Enable the user and set the password: $ /opt/likewise/bin/lw-mod-user --enable-user --set-password newuser New Password: ********** Successfully modified user newuser Look up new user's identity as follows. Substitute the value from the command hostname -s for the hostname. Keep in mind that Likewise truncates a hostname longer than 15 characters to the first 15 characters of the string. % id hostname\\newuser uid=2000(HOSTNAME\newuser) gid=1800(HOSTNAME\Likewise Users) groups=1800(HOSTNAME\Likewise Users) context=system_u:system_r:unconfined_t:s0 Make a CIFS directory for the user: mkdir /lwcifs/newuser chown 2000:1800 /lwcifs/newuser From a Windows computer, map the Likewise-CIFS drive share: Computer->Map Network Drive... Folder: \\IP_hostname\c$ Click "Finish" Username: hostname\newuser Password: user_password The last step fails when I try to connect. I've tried with Windows XP Pro and Windows 7 Pro. The rest of the directions only appear to work for version 5.4 (the one that shipped with 10.04). For 12.04, version 6.1 is the only one available and it doesn't appear to have the srvsvc module mentioned in these instructions. Is CIFS support dropped in the 6.1 version of likewise-open?

    Read the article

  • Wireless AAA for a small, bandwidth-limited hotel.

    - by Anthony Hiscox
    We (the tech I work with and myself) live in a remote northern town where Internet access is somewhat of a luxury, and bandwidth is quite limited. Here, overage charges ranging from few hundreds, to few thousands of dollars a month, is not uncommon. I myself incur regular monthly charges just through my regular Internet usage at home (I am allowed 10G for $60CAD!) As part of my work, I have found myself involved with several hotels that are feeling this. I know that I can come up with something to solve this problem, but I am relatively new to system administration and I don't want my dreams to overcome reality. So, I pass these ideas on to you, those with much more experience than I, in hopes you will share some of your thoughts and concerns. This system must be cost effective, yes the charges are high here, but the trust in technology is the lowest I've ever seen. Must be capable of helping client reduce their usage (squid) Allow a limited (throughput and total usage) amount of free Internet, as this is often franchise policy. Allow a user to track their bandwidth usage Allow (optional) higher speed and/or usage for an additional charge. This fee can be obtained at the front desk on checkout and should not require the use of PayPal or Credit Card. Unfortunately some franchises have ridiculous policies that require the use of a third party remote service to authenticate guests to your network. This means WPA is out, and it also means that I do not auth before Internet usage, that will be their job. However, I do require the ABILITY to perform authentication for Internet access if a hotel does not have this policy. I will still have to track bandwidth (under a guest account by default) and provide the same limiting, however the guest often will require a complete 'unlimited' access, in terms of existence, not throughput. Provide firewalling capabilities for hotels that have nothing, Office, and Guest network segregation (some of these guys are running their office on the guest network, with no encryption, and a simple TOS to get on!) Prevent guests from connecting to other guests, however provide a means to allow this to happen. IE. Each guest connects to a page and allows the other guest, this writes a iptables rule (with python-netfilter) and allows two rooms to play a game, for instance. My thoughts on how to implement this. One decent box (we'll call it a router now) with a lot of ram, and 3 NIC's: Internet Office Guests (AP's + In Room Ethernet) Router Firewall Rules Guest can talk to router only, through which they are routed to where they need to go, including Internet services. Office can be used to bridge Office to Internet if an existing solution is not in place, otherwise, it simply works for a network accessible web (webmin+python-webmin?) interface. Router Software: OpenVZ provides virtualization for a few services I don't really trust. Squid, FreeRADIUS and Apache. The only service directly accessible to guests is Apache. Apache has mod_wsgi and django, because I can write quickly using django and my needs are low. It also potentially has the FreeRADIUS mod, but there seems to be some caveats with this. Firewall rules are handled on the router with iptables. Webmin (or a custom django app maybe) provides abstracted control over any features that the staff may need to access. Python, if you haven't guessed it's the language I feel most comfortable in, and I use it for almost everything. And finally, has this been done, is it a overly massive project not worth taking on for one guy, and/or is there some tools I'm missing that could be making my life easier? For the record, I am fairly good with Python, but not very familiar with many other languages (I can struggle through PHP, it's a cosmetic issue there). I am also an avid linux user, and comfortable with config files and command line. Thank you for your time, I look forward to reading your responses. Edit: My apologies if this is not a Q&A in the sense that some were expecting, I'm just looking for ideas and to make sure I'm not trying to do something that's been done. I'm looking at pfSense now as a possible start for what I need.

    Read the article

  • Disable error_log. Error_log flooding

    - by user36646
    Hello, i got an webserver running and old version of gambio (xt:commerce fork). The error_log in the dir over the public_html is flooding with errors. About 30mb in 15min. How can I disable this log? I can't fix all the errors. Here are a few examples of the errors: [warn] mod_fcgid: stderr: PHP Notice: Undefined variable: key in /usr/www/users/foo//includes/classes/class.inputfilter.php on line 98 [warn] mod_fcgid: stderr: PHP Notice: Undefined index: in /usr/www/users/foo/templ [warn] mod_fcgid: stderr: in /usr/www/users/foo/templates/gambio/source/inc/xtc_show_category_sectionc.inc.php on line 47 They are all errors of: "mod_fcgid: stderr". I tried to grep "error_log" and "error_report" in the public html dir, but i did not find anything. Here is a part from the phpinfo(): PHP Version 4.4.9 System Linux foobar.com 2.6.26-2-686-bigmem #1 SMP Sat Dec 26 09:26:36 UTC 2009 i686 Build Date Feb 11 2010 13:00:33 Configure Command './configure' '--prefix=/usr/local/php4' '--with-config-file-path=/etc/php4/cgi' '--with-gd' '--with-jpeg-dir' '--with-png-dir' '--with-tiff-dir' '--with-ttf' '--enable-force-cgi-redirect' '--enable-safe-mode' '--with-zlib' '--enable-ftp' '--enable-url-includes' '--enable-gd-native-ttf' '--enable-trans-sid' '--enable-dbase' '--with-db4' '--with-ldap' '--enable-bcmath' '--enable-calendar' '--enable-memory-limit' '--with-mcal=/usr' '--with-bz2' '--with-mod-dav' '--enable-sockets' '--with-kerberos' '--with-imap-ssl' '--enable-gd-imgstrttf' '--with-freetype-dir' '--with-curl' '--with-mysql' '--with-mhash' '--with-gdbm' '--with-pgsql' '--with-gettext' '--with-xml' '--with-mcrypt' '--with-openssl' '--with-dom' '--without-pear' '--enable-exif' '--with-zip' '--enable-wddx' '--disable-cli' '--enable-fastcgi' '--with-imap' '--enable-xslt' '--with-xslt-sablot=/usr/local/lib' '--enable-mbstring' '--with-dom-xslt' '--with-dom-exslt' Server API CGI/FastCGI Virtual Directory Support disabled Configuration File (php.ini) Path /home/httpd/php-ini/foo/php.ini PHP API 20020918 PHP Extension 20020429 Zend Extension 20050606 Debug Build no Zend Memory Manager enabled Thread Safety disabled Registered PHP Streams php, http, ftp, https, ftps, compress.bzip2, compress.zlib **Configuration PHP Core** Directive Local Value Master Value allow_call_time_pass_reference On On allow_url_fopen Off Off always_populate_raw_post_data Off Off arg_separator.input & & arg_separator.output & & asp_tags Off Off auto_append_file no value no value auto_prepend_file no value no value browscap no value no value default_charset no value no value default_mimetype text/html text/html define_syslog_variables Off Off disable_classes no value no value disable_functions no value no value display_errors On On display_startup_errors Off Off doc_root no value no value docref_ext no value no value docref_root no value no value enable_dl On On error_append_string no value no value error_log no value no value error_prepend_string no value no value error_reporting 2039 2039 expose_php On On extension_dir /usr/local/php4/lib/php/extensions/no-debug-non-zts-20020429 /usr/local/php4/lib/php/extensions/no-debug-non-zts-20020429 file_uploads On On gpc_order GPC GPC highlight.bg #FFFFFF #FFFFFF highlight.comment #FF8000 #FF8000 highlight.default #0000BB #0000BB highlight.html #000000 #000000 highlight.keyword #007700 #007700 highlight.string #DD0000 #DD0000 html_errors On On ignore_repeated_errors Off Off ignore_repeated_source Off Off ignore_user_abort Off Off implicit_flush Off Off include_path .:/usr/local/lib/php/ .:/usr/local/lib/php/ log_errors Off Off log_errors_max_len 1024 1024 magic_quotes_gpc On On magic_quotes_runtime Off Off magic_quotes_sybase Off Off max_execution_time 120 120 max_input_nesting_level 500 500 max_input_time -1 -1 memory_limit 128000000 128000000 open_basedir /usr/www/users/foo:/usr/home/foo:/tmp:/usr/local/lib/php:/usr/local/rmagic:/usr/www/users/he/_system_ /usr/www/users/foo:/usr/home/foo:/tmp:/usr/local/lib/php:/usr/local/rmagic:/usr/www/users/he/_system_ output_buffering no value no value output_handler no value no value post_max_size 128000000 128000000 precision 14 14 register_argc_argv On On register_globals Off Off report_memleaks On On safe_mode Off Off safe_mode_exec_dir no value no value safe_mode_gid Off Off safe_mode_include_dir no value no value sendmail_from no value no value sendmail_path /usr/sbin/sendmail -t /usr/sbin/sendmail -t serialize_precision 100 100 short_open_tag On On SMTP localhost localhost smtp_port 25 25 sql.safe_mode Off Off track_errors Off Off unserialize_callback_func no value no value upload_max_filesize 128000000 128000000 upload_tmp_dir /usr/foo/foo/.tmp /usr/foo/.tmp user_dir no value no value variables_order EGPCS EGPCS xmlrpc_error_number 0 0 xmlrpc_errors Off Off y2k_compliance Off Off

    Read the article

< Previous Page | 98 99 100 101 102 103 104 105 106 107 108  | Next Page >