Search Results

Search found 15306 results on 613 pages for 'nothing'.

Page 102/613 | < Previous Page | 98 99 100 101 102 103 104 105 106 107 108 109  | Next Page >

• Error 255 samba share simple file share Ubuntu 14.04

  - by Rose Offthorns

  I have been using simple file share on Ubuntu 12.04 for several years not a problem now I have up graded to 14.04 all the problems error 255, tried all sights to fix the problem nothing works even went back to 12.04 still the same problem error 255 'net usershare' returned error 255: net usershare add: cannot convert name "Everyone" to a SID. The connection was refused. Maybe smbd is not running. There appears to be a bug with the new upgrade or has there been a new upgrade. Thanks for any help would be appreciated.

  Read the article

• How do I change which audio jacks are used for input and output?

  - by yamaha1996

  I'm using a Realtek HD audio card built-in my motherboard. The Windows driver comes with a control panel that allows me to select which back panel jacks are used for what. So for example I can make both the blue jack and green jack for output and only the red one for mic-in. (Whereas by default, the blue jack is for line in, which I never need.) How can I do the same under Linux? If possible, please don't suggest something that involves PulseAudio or JACK; I'd like to do it the plain way, e.g. by editing ALSA configuration files, if possible. The way I understand it, my problem should have nothing to do with software servers redirecting streams, just instructing the driver to treat this jack as so and so because it's hardware supported. Thank you very much!

  Read the article

• Ubuntu 14.04.1 will not load - stops in tty1

  - by Mitya Stiglitz

  I was following some "guides" on how to clean my system and have cleaned it so well that it doesn't work anymore. Example: in synaptic, I completely removed all packages in "Not installed: residual configuration" and a ton of other packages I "don't need". I know this has probably been asked a trillion times but I really need to find out how to get back to the working OS I had about two hours ago. One hour of googling has not helped me, so I am asking here. When I start Ubuntu, usually nothing happens for quite some time and then tty1 starts. I can log in normally, but I don't know how to proceed from there. I can do: less /var/log/apt/history.log and get a log, but I don't know how to get started with this...

  Read the article

• Micro QR Code Generator with minimal error correction

  - by Florian Peschka

  I am searching a Micro QR Code Generator that fulfills the following requirements: At least 20 characters encoded Minimal error correction (required to get the 20 characters stuffed in) I already searched google, but it seems all micro qr generators automatically use maximum error correction, which is very unhandy for my task, as we need the 20 characters completety. I can't use standard QR because there are certain requirements that need the code to be smaller than a certain dimension when printed... I hope someone can help me. PS: I'm not sure that this is the right board to post this question on, so feel free to redirect me to a better board if you have an idea. PPS: If nothing can be found and I'm forced to write one on my own: Where can I find detailed information on how to write a QR code generator?

  Read the article

• Terms and conditions for a commerce site

  - by Mantorok

  I am developing a website for my partner who is currently a sole trader, presently selling on ebay but we have opted to create our own site. I've noticed that there are many sites allowing you to purchase base-line T&Cs to be used on websites, I'm tempted to give these a go but I've heard nothing on whether they are any good or not, I know in this position it's best to seek legal advice, but the budget is tight so we really can't afford that. Has anyone had experience with these sites? e.g. http://www.netlawman.co.uk/ecomm-it/website-terms-and-conditions.php?gclid=CPL4g8D3q6cCFQoa4Qodhj5UBg. Thanks

  Read the article

• Reflection: Is using reflection still "bad" or "slow"? What has changed with reflection since 2002?

  - by blesh

  I've noticed when dealing with Expressions or Expression Trees I'm using reflection a lot to set and get values in properties and what have you. It has occurred to me that the use of reflection seems to be getting more and more common. Things like DataAnotations for validation, Attribute heavy ORMs, etc. Have me wondering: What has changed since the days years and years ago when I used to be told to avoid reflection if at all possible? So what, if anything has changed? Is it just the speed of the machines? Have there been changes to the framework to speed up reflection? Or has nothing really changed? Is it still "bad" or "slow" to use reflection? EDIT: To clarify my question a little.

  Read the article

• Goodbye XML&hellip; Hello YAML (part 2)

  - by Brian Genisio's House Of Bilz

  Part 1 After I explained my motivation for using YAML instead of XML for my data, I got a lot of people asking me what type of tooling is available in the .Net space for consuming YAML.  In this post, I will discuss a nice tooling option as well as describe some small modifications to leverage the extremely powerful dynamic capabilities of C# 4.0.  I will be referring to the following YAML file throughout this post Recipe: Title: Macaroni and Cheese Description: My favorite comfort food. Author: Brian Genisio TimeToPrepare: 30 Minutes Ingredients: - Name: Cheese Quantity: 3 Units: cups - Name: Macaroni Quantity: 16 Units: oz Steps: - Number: 1 Description: Cook the macaroni - Number: 2 Description: Melt the cheese - Number: 3 Description: Mix the cooked macaroni with the melted cheese Tooling It turns out that there are several implementations of YAML tools out there.  The neatest one, in my opinion, is YAML for .NET, Visual Studio and Powershell.  It includes a great editor plug-in for Visual Studio as well as YamlCore, which is a parsing engine for .Net.  It is in active development still, but it is certainly enough to get you going with YAML in .Net.  Start by referenceing YamlCore.dll, load your document, and you are on your way.  Here is an example of using the parser to get the title of the Recipe: var yaml = YamlLanguage.FileTo("Data.yaml") as Hashtable; var recipe = yaml["Recipe"] as Hashtable; var title = recipe["Title"] as string; In a similar way, you can access data in the Ingredients set: var yaml = YamlLanguage.FileTo("Data.yaml") as Hashtable; var recipe = yaml["Recipe"] as Hashtable; var ingredients = recipe["Ingredients"] as ArrayList; foreach (Hashtable ingredient in ingredients) { var name = ingredient["Name"] as string; } You may have noticed that YamlCore uses non-generic Hashtables and ArrayLists.  This is because YamlCore was designed to work in all .Net versions, including 1.0.  Everything in the parsed tree is one of two things: Hashtable, ArrayList or Value type (usually String).  This translates well to the YAML structure where everything is either a Map, a Set or a Value.  Taking it further Personally, I really dislike writing code like this.  Years ago, I promised myself to never write the words Hashtable or ArrayList in my .Net code again.  They are ugly, mostly depreciated collections that existed before we got generics in C# 2.0.  Now, especially that we have dynamic capabilities in C# 4.0, we can do a lot better than this.  With a relatively small amount of code, you can wrap the Hashtables and Array lists with a dynamic wrapper (wrapper code at the bottom of this post).  The same code can be re-written to look like this: dynamic doc = YamlDoc.Load("Data.yaml"); var title = doc.Recipe.Title; And dynamic doc = YamlDoc.Load("Data.yaml"); foreach (dynamic ingredient in doc.Recipe.Ingredients) { var name = ingredient.Name; } I significantly prefer this code over the previous.  That’s not all… the magic really happens when we take this concept into WPF.  With a single line of code, you can bind to the data dynamically in the view: DataContext = YamlDoc.Load("Data.yaml"); Then, your XAML is extremely straight-forward (Nothing else.  No static types, no adapter code.  Nothing): <StackPanel> <TextBlock Text="{Binding Recipe.Title}" /> <TextBlock Text="{Binding Recipe.Description}" /> <TextBlock Text="{Binding Recipe.Author}" /> <TextBlock Text="{Binding Recipe.TimeToPrepare}" /> <TextBlock Text="Ingredients:" FontWeight="Bold" /> <ItemsControl ItemsSource="{Binding Recipe.Ingredients}" Margin="10,0,0,0"> <ItemsControl.ItemTemplate> <DataTemplate> <StackPanel Orientation="Horizontal"> <TextBlock Text="{Binding Quantity}" /> <TextBlock Text=" " /> <TextBlock Text="{Binding Units}" /> <TextBlock Text=" of " /> <TextBlock Text="{Binding Name}" /> </StackPanel> </DataTemplate> </ItemsControl.ItemTemplate> </ItemsControl> <TextBlock Text="Steps:" FontWeight="Bold" /> <ItemsControl ItemsSource="{Binding Recipe.Steps}" Margin="10,0,0,0"> <ItemsControl.ItemTemplate> <DataTemplate> <StackPanel Orientation="Horizontal"> <TextBlock Text="{Binding Number}" /> <TextBlock Text=": " /> <TextBlock Text="{Binding Description}" /> </StackPanel> </DataTemplate> </ItemsControl.ItemTemplate> </ItemsControl> </StackPanel> This nifty XAML binding trick only works in WPF, unfortunately.  Silverlight handles binding differently, so they don’t support binding to dynamic objects as of late (March 2010).  This, in my opinion, is a major lacking feature in Silverlight and I really hope we will see this feature available to us in Silverlight 4 Release.  (I am not very optimistic for Silverlight 4, but I can hope for the feature in Silverlight 5, can’t I?) Conclusion I still have a few things I want to say about using YAML in the .Net space including de-serialization and using IronRuby for your YAML parser, but this post is hopefully enough to see how easy it is to incorporate YAML documents in your code. Codeplex Site for YAML tools Dynamic wrapper for YamlCore

  Read the article

• AFP and SAMBA shares are confusing my MacOS X Lion

  - by Pierre

  I've setup my file server running ubuntu 12.04 with AFP/Avahi and Samba shares. Simple configuration, nothing too complicated. I've given my AFP machine a different name than %h to avoid confusion when looking into my Finder. However, my mac os lion mbp still confuses the two and the only way to access the AFP shares is via direct connect to IP address. The samba machine name seems to be hardwired to hostname (I can only see that that workgroup can be changed). Is there anything I am missing or obvious that I need to set? Best regards and thank you in advanced Pierre

  Read the article

• Can't replace MDM Display Manager with LightDM!

  - by Naveen

  Well, I installed MDM, and found it's buggy with my VGA hardware due to the following screen after rebooting: This screen repeats, even if I choose Yes or No As I have access to the console (by pressing ALT+F2) I tried, sudo dpkg-reconfigure lightdm which gave me the following screen, Even if I choose LightDM nothing happens at the next reboot. The first screen comes back! dpkg -l | grep -i mdm command results me following, ii mdm___________1.0.4-0~webupd8~precise_____Gnome Display Mnager ii mint-mdm-themes__1.0.5-0~webupd8~precise1_____Linux Mint MDM Themes (underscores are spaces) Please help... I need LightDM login screen back! Thanks!

  Read the article

• How to reduce the tearing while watching videos?

  - by Leonardo TM

  I'm using the Ubuntu 10.10 with both VLC player and MPlayer and already installed the ATI drivers. I watched the same videos on Windows 7 and Ubuntu. But on Ubuntu the images have a lot of tearing. I tried some newbish-configs on my ATI config tool, but nothing changed. I tried videos in mkv, avi, rmvb... and in all kinds of resolutions. I would love to see some tips or maybe a solution to this problem. (I have searched for similar questions but I didn't find any :/ ) The english is not my primary lang so sorry for my mistakes. Thanks in advance! []'s Leonardo My HW Config (Acer Aspire 5740G-6979) -ATI Mobility Radeon 5650 -Intel Core i5-430M -4GB Ram

  Read the article

• Long pause in pxe/preseed install

  - by Bo Kersey

  I'm encountering a long pause during unattended (preseeded) install of precise server via pxe. The install eventually works, but appears to just sit there for 20 or 30 minutes after it authenticates the mirror. There is nothing in the logs during this time, even with full debug. Log excerpt: Aug 2 13:29:59 net-retriever: Signature made Fri Aug 2 06:05:28 2013 UTC using DSA key ID 437D05B5 Aug 2 13:29:59 net-retriever: gpgv: Aug 2 13:29:59 net-retriever: Good signature from "Ubuntu Archive Automatic Signing Key <[email protected]>" Aug 2 13:29:59 net-retriever: Aug 2 13:50:10 anna[5072]: DEBUG: resolver (ext2-modules): package doesn't exist (ignored) Aug 2 13:50:10 anna[5072]: DEBUG: resolver (efi-modules): package doesn't exist (ignored) Bug related to this problem that is not being worked. I'm surprised that no one else is complaining about this. Or, is there some other way to do an unattended install that everyone else is using?

  Read the article

• Screen (command-line program) bug?

  - by VioletCrime

  fired up my Minecraft server again after about a year off. My server used to run 11.04, which has since been upgraded to 12.04; I lost my management scripts in the upgrade (thought I'd backed up the user's home directory), but whatever, I enjoy developing stuff like that anyways. However, this time around, I'm running into issues. I start the Minecraft server using a detached screen, however the script is unable to 'stuff' commands into the screen instance until I attach to the screen then detach again? Once I do that, I can stuff anything I want into the server's terminal using the -X option, until I stop/start the server again, then I have to reattach and detach in order to restore functionality? Here's the manager script: #!/bin/bash #Name of the screen housing the server (set with the -S flag at startup) SCREENNAME=minecraft1 #Name of the folder housing the Minecraft world FOLDERNAME=world1 startServer (){ if screen -list | grep "$SCREENNAME" > /dev/null then echo "Cannot start Minecraft server; it is already running!" else screen -dmS $SCREENNAME java -Xmx1024M -Xms1024M -jar minecraft_server.jar sleep 2 if screen -list | grep "$SCREENNAME" > /dev/null then echo "Minecraft server started; happy mining!" else echo "ERROR: Minecraft server failed to start!" fi fi; } stopServer (){ if screen -list | grep "$SCREENNAME" > /dev/null then echo "Server is running. Giving a 1-minute warning." screen -S $SCREENNAME -X stuff "/say Shutting down (halt) in one minute." screen -S $SCREENNAME -X stuff $'\015' sleep 45 screen -S $SCREENNAME -X stuff "/say Shutting down (halt) in 15 seconds." screen -S $SCREENNAME -X stuff $'\015' sleep 15 screen -S $SCREENNAME -X stuff "/stop" screen -S $SCREENNAME -X stuff $'\015' else echo "Server is not running; nothing to stop." fi; } stopServerNow (){ if screen -list | grep "$SCREENNAME" > /dev/null then echo "Server is running. Giving a 5-second warning." screen -S $SCREENNAME -X stuff "/say EMERGENCY SHUTDOWN! 5 seconds to halt." screen -S $SCREENNAME -X stuff $'\015' sleep 5 screen -S $SCREENNAME -X stuff "/stop" screen -S $SCREENNAME -X stuff $'\015' else echo "Server is not running; nothing to stop." fi; } restartServer (){ if screen -list | grep "$SCREENNAME" > /dev/null then echo "Server is running. Giving a 1-minute warning." screen -S $SCREENNAME -X stuff "/say Shutting down (restart) in one minute." screen -S $SCREENNAME -X stuff $'\015' sleep 45 screen -S $SCREENNAME -X stuff "/say Shutting down (restart) in 15 seconds." screen -S $SCREENNAME -X stuff $'\015' sleep 15 screen -S $SCREENNAME -X stuff "/stop" screen -S $SCREENNAME -X stuff $'\015' sleep 2 startServer else echo "Cannot restart server: it isn't running." fi; } #In order for this function to work, a directory 'backup/$FOLDERNAME' must exist in the same #directory that '$FOLDERNAME' resides backupWorld (){ if screen -list | grep "$SCREENNAME" > /dev/null then echo "Server is running. Giving a 1-minute warning." screen -S $SCREENNAME -X stuff "/say Shutting down (backup) in one minute." screen -S $SCREENNAME -X stuff $'\015' screen -S $SCREENNAME -X stuff "/say Server should be down for no more than a few seconds." screen -S $SCREENNAME -X stuff $'\015' sleep 45 screen -S $SCREENNAME -X stuff "/say Shutting down for backup in 15 seconds." screen -S $SCREENNAME -X stuff $'\015' sleep 15 screen -S $SCREENNAME -X stuff "/stop" screen -S $SCREENNAME -X stuff $'\015' fi sleep 2 if screen -list | grep $SCREENNAME > /dev/null then echo "Server is still running? Error." else cd .. tar -czvf backup0.tar.gz $FOLDERNAME mv backup0.tar.gz backup/$FOLDERNAME cd backup/$FOLDERNAME rm backup10.tar.gz mv backup9.tar.gz backup10.tar.gz mv backup8.tar.gz backup9.tar.gz mv backup7.tar.gz backup8.tar.gz mv backup6.tar.gz backup7.tar.gz mv backup5.tar.gz backup6.tar.gz mv backup4.tar.gz backup5.tar.gz mv backup3.tar.gz backup4.tar.gz mv backup2.tar.gz backup3.tar.gz mv backup1.tar.gz backup2.tar.gz mv backup0.tar.gz backup1.tar.gz cd ../../$FOLDERNAME screen -dmS $SCREENNAME java -Xmx1024M -Xms1024M -jar minecraft_server.jar; sleep 2 if screen -list | grep "$SCREENNAME" > /dev/null then echo "Minecraft server restarted; happy mining!" else echo "ERROR: Minecraft server failed to start!" fi fi; } printCommands (){ echo echo "$0 usage:" echo echo "Start : Starts the server on a detached screen." echo "Stop : Stop the server; includes a 1-minute warning." echo "StopNOW : Stops the server with only a 5-second warning." echo "Restart : Stops the server and starts the server again." echo "Backup : Stops the server (1 min), backs up the world, and restarts." echo "Help : Display this message." } #Forces case-insensitive string comparisons shopt -s nocasematch #Primary 'Switch' if [[ $1 = "start" ]] then startServer elif [[ $1 = "stop" ]] then stopServer elif [[ $1 = "stopnow" ]] then stopServerNow elif [[ $1 = "backup" ]] then backupWorld elif [[ $1 = "restart" ]] then restartServer else printCommands fi

  Read the article

• How to get Cinnamon working in Virtualbox?

  - by kavoura

  I installed Ubuntu 11.10 (32-bit) in VirtualBox 4.1.8. I wanted to install Cinnamon, so I did and I have the option to choose it from the login screen, as well as GNOME options. If I choose Ubuntu I get Unity, which works fine. GNOME also works. But when I choose Cinnamon, the screen goes black and nothing responds and I have to reset the virtual machine. I have already installed Ubuntu 11.10 (64-bit) onto the PC in a separate partition (currently running 10.10 but trying out 11.10) and in that Cinnamon works perfectly. In VirtualBox I have 3D settings enabled and gave the virtual machine 128 MB graphics RAM, and 1024 MB system RAM. What settings should I change or what should I do to get Cinnamon working in Ubuntu in VirtualBox? I have also tried doing it in LinuxMint 12, but I get the same problem, just a black screen when selecting Cinnamon. So are Cinnamon and VirtualBox incompatible?

  Read the article

• GPL code allowing non-GPL local copies of nondistributed code

  - by Jason Posit

  I have come across a book that claims that alterations and augmentations to GPL works can be kept close-source as long as these are not redistributed into the wild. Therefore, customizations of websites deriving from GPL packages need not be released under the GPL and developers can earn profit on them by offering their services to their clients while keeping their GPL-based code closed source at the same time. (cf. Chapter 17 of WordPress Plugin Development by Wrox Press). I've never realized this, but essentially, by putting restrictions on redistributable code the GPL says nothing about what can and cannot be done with code which is kept private in terms of the licensing model. Have I understood this correctly?

  Read the article

• google changing crawl speed: doesn't seem to work. Why?

  - by Olivier Pons

  I've changed 3 days ago the google crawling speed of mywebsite. Here it is: This means: 2 demands by second. I've got the message on the google webmasters tools that the change speed has been taken in account: But after more than three days, nothing happens: still one request every ten seconds See here: My webserver is very fast and can handle up to twenty simultaneous connexions. And my website is brand new, this means google is almost the only one here crawling my website. After more than 30000 successful requests (= no 404), I think there's something going on... or maybe this is just a bug? Has anyone ever had this problem?

  Read the article

• Installing 12.04 Ubuntu Studio on VMware Workstation 7, won't install VMware Tools

  - by Chase Kelley

  I'm attempting to install Ubuntu Studio 12.04 on my laptop by using VMware Workstation 7.1.5, and I've encountered a problem. The install goes well until the installation of Ubuntu has completed and the installation of VMware Tools starts; after that it just stops. I have waited about an hour and a half and nothing has changed. The installation is on VMware Easy Install, and I am running Windows Vista 32-bit with 3 GB system RAM and 2 GB of RAM on the virtual machine. Any help is greatly appreciated, thank you!

  Read the article

• Is gstreamer the best encoder for vorbis or is there a better encoding engine I should use?

  - by sayth

  I have sound juicer installed and I want to rip to vorbis.ogg. Is gstreamer the best encoder for vorbis or is there a better encoding engine I should use. The default gstreamer profile is audio/x-raw-float,rate=44100,channels=2 ! vorbisenc name=enc quality=0.5 ! oggmux I am going to raise the quality to 0.7 but thats all nothing if gstreamer isn't the best encoder. Any suggestions for high quality ripping? Edit: a good answer to this will also be the top search result in google for "best vorbis encoding engine". Double Edit: It appears oggenc itself is the best encoder which rules out using sound juicer to rip cd's as it uses gstreamer. I have installed oggenc and am testing the command ripper abcde. Found a good configuration for it here oggenc config for abcde

  Read the article

• How will Quantum computing affect us?

  - by CiscoIPPhone

  I am interested in quantum computing, but have not studied it in depth. Things like Shor's algorithm intrigue me. My question is: If quantum computing took off in a big way (i.e. functional quantum home computers were available) how would it affect us programmers and software developers? Would we have to learn how to make use of superposition and entanglement - would it change how we write algorithms? Would more mathematical programmers be required/would we need new skills? Would it change nothing at all from our perspective (i.e. would it be abstracted)? Your opinion is welcome.

  Read the article

• Student wanting to go to a developer conference

  - by Jamie Keeling

  I'm a 21 year old student in my last year of University, and I am looking for information about developer conferences. I live in Derby (United Kingdom) and there's not (As far as I know) many conferences local to where I live. I do have a car at my disposal so travelling shouldn't be a problem. I was hoping somebody could recommend the best way to go about finding and attending a conference, which one is probably the best to go to and what kind of things I'd need to know and take beforehand. I've done a couple of Google searches and searched SO itself but nothing specific to my needs was found. Note: I'm primarily a C# developer using WPF and WinForms but I'm open to pretty much anything.

  Read the article

• General input/output error on OpenOffice 3.2

  - by Scott

  I have been working on a research paper in OpenOffice 3.2 Word Processor and I had a slide show OpenOffice 3.2 Presentation. I saved both frequently and they were not very big (no more then 5 pages of text or a few slides). A few days after I last edited and saved them, I tried to open the slide show but I received window saying: General Error. General input/output error When I tried opening the paper, it asked for ASCII Filter Options (font, character, language, and paragraph break). When I set the normal settings, a single blank document opened with nothing on it. I looked at both of the file's properties and the size was 0 or 1.5 KB, and the volume was unknown. I recently installed some updates for Ubuntu 10.10 and everything else in my computer is working normally including other documents and slide shows. Is this a fixable crash?

  Read the article

• Low level Linux graphics

  - by math4tots

  For educational purposes, I'd like to write an application on a Linux environment that can process keyboard events and draw graphics without huge dependencies like X or SDL. I presume that this must be possible, because X and SDL are just programs themselves, so they must rely on other methods inherent to the environment. Is this understanding correct? If so, where might I learn to write such a program? My limited experience tells me that it would involve making calls to the kernel, and/or writing to special files; however, I haven't been able to find any tutorials on the matter (I am not even sure what to Google). Also, in case it is relevant, I am running Debian Squeeze on Virtualbox. I have used a netinst cd without networking, so there isn't much installed on it currently. I will install gcc, but I am hoping I can get by with nothing more.

  Read the article

• #1045 Cannot log in to the MySQL server

  - by user1198291

  I am totally new in linux/ubuntu I am trying to setup lamp on my OS, however I've installed apache , php , mysql by following commands: sudo apt-get install apache2 sudo apt-get install php5 sudo apt-get install libapache2-mod-php5 sudo apt-get install mysql-server libapache2-mod-auth-mysql php5-mysql sudo apt-get install phpmyadmin everything works fine except that i totally cannot log into MySQL(which leads to phpmyadmin failure login) getting the errors : #1045 Cannot log in to the MySQL server Access denied for user 'root'@'localhost' (using password: YES) I googled the problem and also I have tried to reinstall all installed components, but the same result came up! in windows i usually modified the content of mysql configure file but in ubuntu nothing is as same as windows!:) can anybody help me on this, really need to setup lampp :-S thanks in advanced

  Read the article

• Cannot install shell-themes using gnome-tweak-tool

  - by Chris

  How do I fix this? I will attempt to upload a screenshot of the problem. Notice there is an error like triangle near the shell themes and nothing is select-able. Also there are no shell extensions under the shell extensions tab. I have come across many postings on how to fix this but none worked for me. I currently have 12.04 LTS. I have a custom Phenom quad core machine with Radeon HD 5770 graphics if that helps.

  Read the article

• Unable to install juju-gui locally?

  - by Maciek

  I'm attempting to setup juju-gui in a VM running Ubuntu 13.10 x64 Server. I intend to see if it's possible to deploy an openstack "all in one" node, using this method in that particular VM. I've installed and bootstrapped juju in a local environment : $sudo apt-get install juju-core $sudo apt-get install juju-local $juju switch local $sudo juju bootstrap Next I've executed the following : $juju deploy juju-gui $juju expose juju-gui $watch juju status I was expecting to see juju-gui open up some ports and become available via a web-browser but nothing like that happened - why? how do I fix that? I believe I've managed to follow the deployment guides to the letter? Are there any detailed walkthroughs regarding deploying openstack on 13.10, using juju? Cheers :)

  Read the article

• Set up iis7.5 to deny connections outside of LAN for certain folder [migrated]

  - by Darkcat Studios

  Im setting up a combined website and extranet currently, they both read from the same database on the same server as the site is hosted on. The reason being that the website is fed from the data that the staff plug into the extranet interface. it also links in to AD for authorising access to the extranet. I have the extranet in a folder within the website folder. What I want to do is only allow the extranet to be accessed from computers within our LAN, but allow the main website to be freely accessible to internet users. I have it set up as a generic web server currently, so anyone can view anything (well up to the point where the user is asked to log into the extranet of course! I have read a lot on this but nothing I read applies to, or works in IIS7.5

  Read the article

< Previous Page | 98 99 100 101 102 103 104 105 106 107 108 109  | Next Page >