Search Results

Search found 2899 results on 116 pages for 'rate limiting'.

Page 102/116 | < Previous Page | 98 99 100 101 102 103 104 105 106 107 108 109  | Next Page >

  • Why do I see a large performance hit with DRBD?

    - by BHS
    I see a much larger performance hit with DRBD than their user manual says I should get. I'm using DRBD 8.3.7 (Fedora 13 RPMs). I've setup a DRBD test and measured throughput of disk and network without DRBD: dd if=/dev/zero of=/data.tmp bs=512M count=1 oflag=direct 536870912 bytes (537 MB) copied, 4.62985 s, 116 MB/s / is a logical volume on the disk I'm testing with, mounted without DRBD iperf: [ 4] 0.0-10.0 sec 1.10 GBytes 941 Mbits/sec According to Throughput overhead expectations, the bottleneck would be whichever is slower, the network or the disk and DRBD should have an overhead of 3%. In my case network and I/O seem to be pretty evenly matched. It sounds like I should be able to get around 100 MB/s. So, with the raw drbd device, I get dd if=/dev/zero of=/dev/drbd2 bs=512M count=1 oflag=direct 536870912 bytes (537 MB) copied, 6.61362 s, 81.2 MB/s which is slower than I would expect. Then, once I format the device with ext4, I get dd if=/dev/zero of=/mnt/data.tmp bs=512M count=1 oflag=direct 536870912 bytes (537 MB) copied, 9.60918 s, 55.9 MB/s This doesn't seem right. There must be some other factor playing into this that I'm not aware of. global_common.conf global { usage-count yes; } common { protocol C; } syncer { al-extents 1801; rate 33M; } data_mirror.res resource data_mirror { device /dev/drbd1; disk /dev/sdb1; meta-disk internal; on cluster1 { address 192.168.33.10:7789; } on cluster2 { address 192.168.33.12:7789; } } For the hardware I have two identical machines: 6 GB RAM Quad core AMD Phenom 3.2Ghz Motherboard SATA controller 7200 RPM 64MB cache 1TB WD drive The network is 1Gb connected via a switch. I know that a direct connection is recommended, but could it make this much of a difference? Edited I just tried monitoring the bandwidth used to try to see what's happening. I used ibmonitor and measured average bandwidth while I ran the dd test 10 times. I got: avg ~450Mbits writing to ext4 avg ~800Mbits writing to raw device It looks like with ext4, drbd is using about half the bandwidth it uses with the raw device so there's a bottleneck that is not the network.

    Read the article

  • DVD Drive Failing on Windows 7

    - by Seth Spearman
    Hello, I have x64 Windows 7 running on an ASUS M50VM. The DVD drive works completely unreliably if not at all. But the story is not that simple so bear with me...here are the gory details. When I first got the machine it came with Windows XP and I upgraded it to Windows Vista X64 and the DVD worked fine. When Windows 7 RC2 came out I tried it on a Virtual Machine and I liked it so much that I upgraded the machine to Win7 RC1. The DVD worked fine. Of course, RC1 was going to start spontaneously rebooting, so when Windows 7 was released I DID A CLEAN INSTALL of Windows 7. Just to clarify...by clean install I mean I did a FORMAT of the HARD DRIVE and INSTALLED it from scratch. EVER since then the DVD mostly doesn't work. I can sometime read from disk but that will often hang. (Please see my description below of HANG for details.) CD or DVD writes ALWAYS fail with a HANG (I have done a successful write only one time.) Here is what I mean by HANG... *Explorer Window is unresponsive. *Any software accessing the DVD drive is unresponsive. *The DVD tray will not eject. *Using a paper clip will eject but the disk is usually spinning real hard. *Attempting to shut down windows will fail. I have waited as long as ten minutes but the whole OS seems to hang. I do a hard shutdown. *Sometimes accessing the DVD (when it does not cause a HANG) will still fail and the device will actually seem to disappear from the system until I reboot. A couple of other things. It is NOT a hardware failure. It is the Windows OS. I know this because I swapped out my DVD drive with a friend with the same model...his machine is fine (he is still running Vista X64) and my machine still fails. For what it is worth. I swapped out my primary disk with the INTEL 160GB SSD. EDIT Here is what System Information shows about my DVD drive Drive D: Description CD-ROM Drive Media Loaded No Media Type DVD Writer Name HL-DT-ST DVDRAM GSA-T50N ATA Device Manufacturer (Standard CD-ROM drives) Status OK Transfer Rate -1.00 kbytes/sec SCSI Target ID 0 PNP Device ID IDE\CDROMHL-DT-ST_DVDRAM_GSA-T50N________________RR04____\5&2B5B7F1D&0&1.0.0 Driver c:\windows\system32\drivers\cdrom.sys (6.1.7600.16385, 144.00 KB (147,456 bytes), 7/13/2009 7:19 PM) Any ideas? HELP! Seth B Spearman

    Read the article

  • DVD Drive Failing on Windows 7

    - by Seth Spearman
    I have x64 Windows 7 running on an ASUS M50VM. The DVD drive works completely unreliably if not at all. But the story is not that simple so bear with me...here are the gory details. When I first got the machine it came with Windows XP and I upgraded it to Windows Vista X64 and the DVD worked fine. When Windows 7 RC2 came out I tried it on a Virtual Machine and I liked it so much that I upgraded the machine to Win7 RC1. The DVD worked fine. Of course, RC1 was going to start spontaneously rebooting, so when Windows 7 was released I DID A CLEAN INSTALL of Windows 7. Just to clarify...by clean install I mean I did a FORMAT of the HARD DRIVE and INSTALLED it from scratch. EVER since then the DVD mostly doesn't work. I can sometime read from disk but that will often hang. (Please see my description below of HANG for details.) CD or DVD writes ALWAYS fail with a HANG (I have done a successful write only one time.) Here is what I mean by HANG... *Explorer Window is unresponsive. *Any software accessing the DVD drive is unresponsive. *The DVD tray will not eject. *Using a paper clip will eject but the disk is usually spinning real hard. *Attempting to shut down windows will fail. I have waited as long as ten minutes but the whole OS seems to hang. I do a hard shutdown. *Sometimes accessing the DVD (when it does not cause a HANG) will still fail and the device will actually seem to disappear from the system until I reboot. A couple of other things. It is NOT a hardware failure. It is the Windows OS. I know this because I swapped out my DVD drive with a friend with the same model...his machine is fine (he is still running Vista X64) and my machine still fails. For what it is worth. I swapped out my primary disk with the INTEL 160GB SSD. EDIT Here is what System Information shows about my DVD drive Drive D: Description CD-ROM Drive Media Loaded No Media Type DVD Writer Name HL-DT-ST DVDRAM GSA-T50N ATA Device Manufacturer (Standard CD-ROM drives) Status OK Transfer Rate -1.00 kbytes/sec SCSI Target ID 0 PNP Device ID IDE\CDROMHL-DT-ST_DVDRAM_GSA-T50N________________RR04____\5&2B5B7F1D&0&1.0.0 Driver c:\windows\system32\drivers\cdrom.sys (6.1.7600.16385, 144.00 KB (147,456 bytes), 7/13/2009 7:19 PM) Any ideas? HELP! Seth B Spearman

    Read the article

  • Skyrim: Heavy Performance Issues after a couple of location changes

    - by Derija
    Okay, I've tried different solutions: ENB Series, removing certain mods, checking my FPS Rate, monitoring my resources, .ini tweaks. It's all just fine, I don't see what I'm missing. A couple of days ago, I bought Skyrim. Before I bought the game, I admit I had a pirated copy because my girlfriend actually wanted to buy me the game as a present, then said she didn't have enough money. Sick of waiting, I decided to buy the game by myself. The ridiculous part is, it worked better cracked than it does now uncracked. As the title suggests, after entering and leaving houses a couple of times, my performance obviously drops extremely. My build is just fine, Intel i5 quad core processor, NVIDIA GTX 560 Ti from Gigabyte, actually stock-OC, but manually downclocked to usual settings using appropriate Gigabyte software. This fixed the CTD issues I had before with both Skyrim and BF3. I have 4GB RAM. A website about Game Tweaks suggested that my HDD may be too slow. A screenshot of a Windows Performance Index sample with the subscription "This is likely to cause issues" showed the HDD with a performance index of 5.9, the exact same mine has, so I was playing with the thought to purchase an SSD instead, load games onto it that really need it like Skyrim, and hope it'd do the trick. Unfortunately, SSDs are likewise expensive, compared to "normal" HDDs... I'm really getting desperate about it. My save is gone because the patches made it impossible to load saves of the unpatched version and I already saved more than 80 times despite being only level 8, just because every time I interact with a door leading me to another location I'm scared the game will drop again. I can't even play for 30 mins straight anymore, it's just no fun at all. I've researched for a couple of days before I decided to post my question here. Any help is appreciated, I don't want to regret having bought the game... Since it actually is the best game I've played possibly for ever. Sincerely. P.S.: I don't think it's necessary to say, but still, of course I'm playing on PC. P.P.S.: After monitoring both my PC resources including CPU usage and HDD usage as well as the GPU usage, I don't see any changes even after the said event. P.P.P.S.: Original question posted here where I've been advised to ask here.

    Read the article

  • Apache + Tomcat error 120006 Using mod_proxy_ajp for Load Balance

    - by Wakaru44
    I have an apache 2 frontend with two nodes, and a backend with two instances of tomcat 6 balance with mod_proxy_ajp. The bbdd is in a separate machine. All machines use RHEL, 6.2 on the frontend, 5.5 on the backend. The infraestructure is virtualized using VMware. # This is the apache config in one of the virtualHost. ProxyPreserveHost On ProxyPass / balancer://liferay/ <Proxy balancer://liferay> BalancerMember ajp://lrab:8009 route=liferaya BalancerMember ajp://lrbb:8009 route=liferayb status=+H ProxySet lbmethod=byrequests nofailover=on </Proxy> The conector in tomcat is now configured like this: <!-- Define an AJP 1.3 Connector on port 8009 --> <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" URIEncoding="UTF-8" enableLookups="false" allowTrace="true" /> Do you think it could be useful to set a maxThreads parameter, like in this post?? in that case, How can i determine a proper number of threads? From time to time, we get errors like this [Tue Sep 18 17:57:02 2012] [error] ajp_read_header: ajp_ilink_receive failed [Tue Sep 18 17:57:02 2012] [error] (120006)APR does not understand this error code: proxy: read response failed from 192.168.1.104:8009 (lrab) And apache switches to the pasive node (if its active) or fails with 503. Some things i have tried so far: I think that i have some performance issues with one of the applications, Here you can see a threadDump But i'm not quite sure about it. I also started to monitor the network connection. I have noticed that there are some pings lost when i have a "ping -f " so maybe it could be a network issue, but the success rate is 100% (so the lost packets are only a few among the flood, but maybe, i don't know, enough to break the link betwen apache and tomcat). I wrote a python script to check connectivity with timestamps on the pings, so i can know when the network fails. After sniffing the network , i can also see some RST packets, but i don't know if that is a normal behaviour (some applications do that to end a network communication). I have also noticed that the applications have problems communicating with the database, but im not even sure if this could be related or not. If you think so, i can post more info about it. I changed the connector on the tomcats to use the native one, but still the same. I need not even a solution to this, but maybe some guidance on how can i troubleshoot this better ¿Analyze threads, monitor mysql performance, sniff the traffic between apaches and tomcats? Ultimately, all i need is to balance the tomcat instances in Active/pasive mode, so if there is another way to do it, i could give it a try.

    Read the article

  • Splunk is fantastically expensive: What are the alternatives? [closed]

    - by samsmith
    Possible Duplicate: Alternatives to Splunk? This has been discussed, but it has been several months, so it may be time to revisit it: Earlier discussion RE Splunk alternatives For the record, Splunk rocks. But the pricing is simply beyond what we can consider (When I spoke with Splunk today, the cost for a system to index 5gb/day of data is over $30,000.) That is more than we spend on SQL Server (by a large multiple), more than we spend on a rack of servers (by a multiple), etc. etc. The splunk sales team is correct (that for $30K we get more value and functionality than if we spend the same building our own system), but it doesn't matter. The splunk cost is simply too high (by a multiple). Soooooo, we are looking around! Is anyone out there building a splunk like system? Our basic need: Able to listen for syslog messages on multiple udp ports Able to index the incoming data in an async way Some kind of search engine Some kind of UI An API to the search engine (to embed in our console) We currently need to index 3-5gb/day, but need to be able to scale to 10gb/day or more. We do not need a lot of history (30 days is fine). We use Windows 2008 and 2003 servers. Thanks for your thoughts! UPDATE: We spent two weeks researching commercial and open source options. Our conclusion: Write our own (we are a software company... we know how to write things). We built a great system built on mongodb and .NET that gives us the functions we needed from MongoDB in about one engineering week. We have now completed our implementation. We use two Mongodb servers (master and slave), and are able to log and index any amount of log data (5gb/day, 15gb/day, etc), limited only by disk space. OBSERVATIONS: This space needs a solid solution that is $1000-3000 flat rate. The licensing models used by the commercial firms are based on a "milk the data center ops guys" models. That is their right (of course!), but it leaves a HUGE space open for someone to come in underneath them. My guess is that in another year or two there will be a good open source solution that will be really usable. Thank you all for your input (even if it was self promotion).

    Read the article

  • The ping response time doesn't reflect the real network response time

    - by yangchenyun
    I encountered a weird problem that the response time returned by ping is almost fixed at 98ms. Either I ping the gateway, or I ping a local host or a internet host. The response time is always around 98ms although the actual delay is obvious. However, the reverse ping (from a local machine to this host) works properly. The following is my route table and the result: route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 100 0 0 eth1 60.194.136.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth1 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 # ping the gateway ping 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. 64 bytes from 192.168.1.1: icmp_req=1 ttl=64 time=98.7 ms 64 bytes from 192.168.1.1: icmp_req=2 ttl=64 time=97.0 ms 64 bytes from 192.168.1.1: icmp_req=3 ttl=64 time=96.0 ms 64 bytes from 192.168.1.1: icmp_req=4 ttl=64 time=94.9 ms 64 bytes from 192.168.1.1: icmp_req=5 ttl=64 time=94.0 ms ^C --- 192.168.1.1 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4004ms rtt min/avg/max/mdev = 94.030/96.149/98.744/1.673 ms #ping a local machine ping 192.168.1.88 PING 192.168.1.88 (192.168.1.88) 56(84) bytes of data. 64 bytes from 192.168.1.88: icmp_req=1 ttl=64 time=98.7 ms 64 bytes from 192.168.1.88: icmp_req=2 ttl=64 time=96.9 ms 64 bytes from 192.168.1.88: icmp_req=3 ttl=64 time=96.0 ms 64 bytes from 192.168.1.88: icmp_req=4 ttl=64 time=95.0 ms ^C --- 192.168.1.88 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 95.003/96.696/98.786/1.428 ms #ping a internet host ping google.com PING google.com (74.125.128.139) 56(84) bytes of data. 64 bytes from hg-in-f139.1e100.net (74.125.128.139): icmp_req=1 ttl=42 time=99.8 ms 64 bytes from hg-in-f139.1e100.net (74.125.128.139): icmp_req=2 ttl=42 time=99.9 ms 64 bytes from hg-in-f139.1e100.net (74.125.128.139): icmp_req=3 ttl=42 time=99.9 ms 64 bytes from hg-in-f139.1e100.net (74.125.128.139): icmp_req=4 ttl=42 time=99.9 ms ^C64 bytes from hg-in-f139.1e100.net (74.125.128.139): icmp_req=5 ttl=42 time=99.9 ms --- google.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 32799ms rtt min/avg/max/mdev = 99.862/99.925/99.944/0.284 ms I am running iperf to test the bandwidth, the rate is quite low for a LAN connection. iperf -c 192.168.1.87 -t 50 -i 10 -f M ------------------------------------------------------------ Client connecting to 192.168.1.87, TCP port 5001 TCP window size: 0.06 MByte (default) ------------------------------------------------------------ [ 4] local 192.168.1.139 port 54697 connected with 192.168.1.87 port 5001 [ ID] Interval Transfer Bandwidth [ 4] 0.0-10.0 sec 6.12 MBytes 0.61 MBytes/sec [ 4] 10.0-20.0 sec 6.38 MBytes 0.64 MBytes/sec [ 4] 20.0-30.0 sec 6.38 MBytes 0.64 MBytes/sec [ 4] 30.0-40.0 sec 6.25 MBytes 0.62 MBytes/sec [ 4] 40.0-50.0 sec 6.38 MBytes 0.64 MBytes/sec [ 4] 0.0-50.1 sec 31.6 MBytes 0.63 MBytes/sec

    Read the article

  • HOW TO Convert DVD to iPad(Also converts to iPods)?

    - by goodm
    DVD to iPad Converter (Also converts to iPods) DVD to iPad Converter is the easiest-to-use and fastest DVD to iPad converter for Apple iPad movie and iPad video. It can convert almost any kind of DVD to iPad movie or iPad video format. It is also a powerful DVD to iPad converter with a conversion speed that is much faster than real-time. With this converter, you can use your iPad as a portable DVD player and enjoy your favorite DVDs on your iPad. http://www.softseeking.com/prodail.aspx?proid=83" Features of this DVD to iPad Converter Three Running Modes --In Direct Mode, you can directly click the DVD menu to select the movie you want to rip. This mode is very easy for ripping DVD movies. --In Batch Mode, you can select the DVD titles or chapters you want to rip via a checkbox list. This mode is very easy for batch ripping music DVDs, MTV DVDs and episodic DVDs. --In 1-Click Mode, you just need one click to open a DVD, after which the rest of the task will be done automatically. This is a “designed-for-dummies” mode. Input Types You can convert almost any kind of DVD format to iPad. Output Splitting You can split your output video by DVD chapters and titles. Fully supports MTV DVDs and episodic DVDs. File Size and Quality Adjustment You can customize the output file size and corresponding video quality. Flexible Output Profiles You can easily customize the various video settings such as brightness, bit rate, etc. Language Selection for Subtitles and Audio Track In Direct mode and in Batch mode, you can select the subtitle and audio track language. (In 1-Click mode, the default language is chosen automatically). Video Crop You can crop your video to 16:9, 4:3, full screen, etc. Video Resize You can resize your video. For example, you can set it to "Keep aspect ratio" or "Stretch to fit screen." Other Converts DVD to MP3 audio. Supports Dolby, DTS Surround audio track. Converts to the latest iPhone, 4th generation iPad nano, nano chromatic, 2nd generation iPad touch, and Apple TV.

    Read the article

  • networked storage for a research group, 10-100 TB

    - by Marc
    this is related to this post: http://serverfault.com/questions/80854/scalable-24-tb-nas-for-research-department but perhaps a little more general. Background: We're a research lab of around 10 people who do a lot of experiments that involve taking pictures at one of several lab setups and then analyzing it an one of several lab computers. Each experiment may produce 2 or 3 GB of data, and we are generating data at the rate of about 10 TB/year. Right now, we are storing the data on a 6-bay netgear readynas pro, but even with 2 TB drive, this only gives us 10 TB of storage. Also, right now we are not backing up at all. Our short term backup plan is to get a second readynas, put it in a different building and mirror the one drive onto the other. Obviously, this is somewhat non-ideal. Our options: 1) We can pay our university $400/ TB /year for "backed up" online storage. We trust them more than we trust us, but not a whole lot. 2) We can continue to buy small NASs and mirror them between offices. One limit, although stupid, is that we don't have an unlimited number of ethernet jacks. 3) We can try to implement our own data storage solution, which is why I'm asking you guys. One thing to consider is that we're a very transient population and none of us are network administration experts. I will probably be here only another year or so, and graduate students, who are here the longest, have a 5-6 year time scale. So nothing can require expert oversight. Our data transfer rates are low - most of the data will just sit on the server waiting for someone to look at it once or twice - so we don't need a really high speed system. Given these contraints, can someone recommend a fairly low-cost, scalable, more or less turn key shared data storage system with backup in a separate physical location. Does such a thing exist or should we just pay the university to take care of it for us? As a second question, our professor just got tenure and is putting together a budget. Here the goal is to ask for as much as you can and hope you get a fraction of it. So the same question, minus the low-cost. Without budget constraints, can you recommend a scalable turn-key backed up storage system. Thanks

    Read the article

  • how to setup kismet.conf on Ubuntu

    - by Registered User
    I installed Kismet on my Ubuntu 10.04 machine as apt-get install kismet every thing seems to work fine. but when I launch it I see following error kismet Launching kismet_server: //usr/bin/kismet_server Suid priv-dropping disabled. This may not be secure. No specific sources given to be enabled, all will be enabled. Non-RFMon VAPs will be destroyed on multi-vap interfaces (ie, madwifi-ng) Enabling channel hopping. Enabling channel splitting. NOTICE: Disabling channel hopping, no enabled sources are able to change channel. Source 0 (addme): Opening none source interface none... FATAL: Please configure at least one packet source. Kismet will not function if no packet sources are defined in kismet.conf or on the command line. Please read the README for more information about configuring Kismet. Kismet exiting. Done. I followed this guide http://www.ubuntugeek.com/kismet-an-802-11-wireless-network-detector-sniffer-and-intrusion-detection-system.html#more-1776 how ever in kismet.conf I am not clear with following line source=none,none,addme as to what should I change this to. lspci -vnn shows 0c:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01) Subsystem: Dell Device [1028:000c] Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f69fc000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [58] Vendor Specific Information <?> Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting <?> Capabilities: [13c] Virtual Channel <?> Capabilities: [160] Device Serial Number Capabilities: [16c] Power Budgeting <?> Kernel driver in use: wl Kernel modules: wl, ssb and iwconfig shows lo no wireless extensions. eth0 no wireless extensions. eth1 IEEE 802.11bg ESSID:"WIKUCD" Mode:Managed Frequency:2.462 GHz Access Point: <00:43:92:21:H5:09> Bit Rate=11 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Managementmode:All packets received Link Quality=1/5 Signal level=-81 dBm Noise level=-90 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:169 Invalid misc:0 Missed beacon:0 So what should I be putting in place of source=none,none,addme with output I mentioned above ?

    Read the article

  • Recover strategy single bad sector in moricon

    - by Damon
    This week, my harddisk made me an early christmas present in the form of a single defect sector. To make up for the puny size of the present, it chose a sector inside moricons.dll for that. This means that now the system takes about 5 minutes to boot before Windows gives up and moves on, and there's 2 dozen scary "critical failure" entries in the system log after every boot, which is annoying. OK, admittedly, I shouldn't complain, it could be worse, the bad sector could be in ntldr... SMART info more or less indicates (for what SMART can indicate anyway) that the drive is mostly OK. Soft Read Error Rate has a score of 96, and Current Pending Sector Count has a raw value of 8, which translates to a score of 100. Acronis DriveMonitor makes this an issue (lowering the overall rating to 75%), HDD Health calls it "excellent", giving an overall rating of 95% (which is what this harddisk from day one). No single score is below 95 (power on hours and spin up count), and most are 100 anyway. Well, whatever, I've seen drives with perfect SMART values fail from one second to the other, and drives with moderate values work for years. So, I'm inclined not to put too much weight into that overall. TL;DR Now... to the problem: I don't feel like trashing the disk just yet (that's planned with a new OS install upgrading to Win7 early next year, independently of this issue), but in the mean time, I would still like to have a smoothly running system again. Therefore, I feel tempted to tamper with it, but before I render my system entirely unusable (since I've never done this before), I'd like to verify that my planned procedere is likely to suceed in having a working system again: Copy moricons.dl_ from the Windows install disk, rename it to moricons.zip, and unzip it. This gives an intact 5.1.2600.2180 version (the broken one is 5.1.2600.5512 - but I guess this makes not much of a difference, since it's an icon-only DLL, and an outdated copy should work better than one that can't be read) Run chkdsk /r /f` which will "repair" the file (i.e. delete the file without asking, tell the drive to remap the sector, and toss some unreadable junk into a file with a hexadecimal number) Hopefully Windows still boots after this (is that a reasonable expectation, or do I need to have something like BartPE ready? -- but then again, what's that good for in case chkdsk has nuked the entire file system...) Delete the junk file generated by chkdsk, copy the new DLL to %windir%\system32 Reboot. Pray. Maybe I just shouldn't touch anything, since it still kind of works... if annoying, but it works. Unsure... But, is there anything fundamentally wrong with the planned approach? Is this a sensible approach at all?

    Read the article

  • iTunes and Hulu Playback Choppy and Slow?

    - by Bart Silverstrim
    Specs: Windows XP, latest updates 1.7 ghz Pentium 4 1 gig ram DirectX 9.0c NVIDIA GeForce FX 5200 with 256 meg RAM OpenGL 2.1 The story: Okay, I had an older system laying around that I figured I would try turning into a mini-media system to connect to our TV. I put together a lot of older parts, got it into working order, etc. and hooked it up and voila'...slower, but usable system that displayed to the TV. It could run some things decently. I put in iTunes, it played video okay. Not great, but okay. Played Hulu and since we have a 1Mb download rate, the minimum for their site, there were some choppy moments when watching their shows, but I found that (sadly) changing resolution to 800x600 seemed to help with the issue when running full screen. I downloaded the application called Boxee and installed it. It wouldn't run; apparently the video card in the system supported OpenGL 1.2, and needed at least 1.4. I bought a cheap card, the 5200, with four times the memory in it and support for OpenGL 2.1. Installed, everything seemed fine. iTunes seemed to run fine, the video driver (PNY video card) came with OpenGL 2.1, and Boxee finally ran. I then upgraded to the latest drivers for the video card and ran the DirectX updater from MS. After that, the OpenGL Extension Viewer wouldn't run. It just stayed as an icon in the task bar. Also, any and all videos in iTunes stuttered and went out of sync horribly. Unwatchable. I tried watching Hulu video in Boxee, and it displayed video like it was a series of stills in a very bad powerpoint. Playing straightforward audio-only came through fine, no stutters no hiccups. I tried system restore to roll back updates to pre-directX updates (I thought that seemed to be the time that triggered the weird behavior), no joy. I tried uninstalling and reinstalling the video drivers. I installed updated audio drivers (ensoniq audiopci), nothing helped. I finally wiped the drive last night and tried reinstalling everything and restoring my iTunes content via an import from a backup. Fresh install, no updater on the video card or directx. the problem was still there although I haven't tested Hulu, the iTunes player is still stuttering like crazy if I play video, fine if I play audio. I know the processor isn't high in heft, but with one gig of RAM and the fact that it seemed to do okay before I thought that the problem must be software related. Has anyone else run into this sort of issue and have a solution other than "buy a new computer"? What specs seem to work with video at the low end for you? Right now the system is of little use other than keeping my music library and iTunes apps synced with my iPod.

    Read the article

  • Display is slightly blurry on (native) 1920x1080 resolution

    - by Martin Tuskevicius
    I have a computer monitor that is approximately 23" in size. Its native resolution is 1920x1080, and Windows 7 will not allow it to be any higher. However, I cannot make the resolution a little lower as well. When I right-click on my desktop and select 'Screen resolution,' the vertical slider has only two options: 1920x1080 and 1280x720. There are no real problems that I am having besides the fact that the image is slightly blurry. I can easily make things out and see them, but I definitely feel that the image is not as clear as it could be. My graphics card is ATI Radeon HD 5450 and it has the latest graphics drivers installed. I've tried playing around with the AMD VISION Engine Control Center to see if I can change an option to make the image clearer, but I had no luck. I did find one odd thing, though. When I lowered the refresh rate from 60Hz to 50Hz, the image kind of "zoomed in" but it also became perfectly clear like I would expect it to look. The problem is that when I use 50Hz, the image zooms in a little on the center and I lose maybe an inch and a half of the screen (I do not see the bar at the top of applications, I do not see the Windows taskbar thing, etc). I figured if I could somehow zoom in so that the entire image fills the screen (not the slightly cropped version) then I would have the perfectly crisp image of 50Hz, and also the uncropped image of 60Hz. However, upon zooming in, the image began to look blurry again just like it did with 60Hz. So I am at a loss here. I do not know how to make the image look as clear as it should. I have the latest drivers (I updated them today) and I know that my monitor supports the resolution that I am trying to use. Has anybody experienced something like this before? I'd really appreciate any input - thanks! Update: I have figured out how to make the display look crisp! I set it to the 50Hz option, and then I changed the scaling through the monitor itself, rather than software. Now, however, I am finding that games look pretty bad because since it is clear, the lower quality really becomes apparent. I cannot run new games at 1080p, so I run them at the lowest resolution possible (1280x720, since it is the only other option offered, as I have mentioned). So I am wondering, is there a way to have Windows display more resolution options?

    Read the article

  • Troubleshooting Network Speeds -- The Age Old Inquiry

    - by John K
    I'm looking for help with what I'm sure is an age old question. I've found myself in a situation of yearning to understand network throughput more clearly, but I can't seem to find information that makes it "click" We have a few servers distributed geographically, running various versions of Windows. Assuming we always use one host (a desktop) as the source, when copying data from that host to other servers across the country, we see a high variance in speed. In some cases, we can copy data at 12MB/s consistently, in others, we're seeing 0.8 MB/s. It should be noted, after testing 8 destinations, we always seem to be at either 0.6-0.8MB/s or 11-12 MB/s. In the building we're primarily concerned with, we have an OC-3 connection to our ISP. I know there are a lot of variables at play, but I guess I was hoping the experts here could help answer a few basic questions to help bolster my understanding. 1.) For older machines, running Windows XP, server 2003, etc, with a 100Mbps Ethernet card and 72 ms typical latency, does 0.8 MB/s sound at all reasonable? Or do you think that slow enough to indicate a problem? 2.) The classic "mathematical fastest speed" of "throughput = TCP window / latency," is, in our case, calculated to 0.8 MB/s (64Kb / 72 ms). My understanding is that is an upper bounds; that you would never expect to reach (due to overhead) let alone surpass that speed. In some cases though, we're seeing speeds of 12.3 MB/s. There are Steelhead accelerators scattered around the network, could those account for such a higher transfer rate? 3.) It's been suggested that the use SMB vs. SMB2 could explain the differences in speed. Indeed, as expected, packet captures show both being used depending on the OS versions in play, as we would expect. I understand what determines SMB2 being used or not, but I'm curious to know what kind of performance gain you can expect with SMB2. My problem simply seems to be a lack of experience, and more importantly, perspective, in terms of what are and are not reasonable network speeds. Could anyone help impart come context/perspective?

    Read the article

  • how to generate tinymce to ajax generated textarea

    - by Jai_pans
    Hi, i have a image multi-uloader script which also each item uploaded was preview 1st b4 it submitted and each images has its following textarea which are also generated by javascript and my problem is i want to use the tinymce editor to each textarea generated by the ajax. Any help will be appreciated.. here is my script function fileQueueError(file, errorCode, message) { try { var imageName = "error.gif"; var errorName = ""; if (errorCode === SWFUpload.errorCode_QUEUE_LIMIT_EXCEEDED) { errorName = "You have attempted to queue too many files."; } if (errorName !== "") { alert(errorName); return; } switch (errorCode) { case SWFUpload.QUEUE_ERROR.ZERO_BYTE_FILE: imageName = "zerobyte.gif"; break; case SWFUpload.QUEUE_ERROR.FILE_EXCEEDS_SIZE_LIMIT: imageName = "toobig.gif"; break; case SWFUpload.QUEUE_ERROR.ZERO_BYTE_FILE: case SWFUpload.QUEUE_ERROR.INVALID_FILETYPE: default: alert(message); break; } addImage("images/" + imageName); } catch (ex) { this.debug(ex); } } function fileDialogComplete(numFilesSelected, numFilesQueued) { try { if (numFilesQueued 0) { this.startUpload(); } } catch (ex) { this.debug(ex); } } function uploadProgress(file, bytesLoaded) { try { var percent = Math.ceil((bytesLoaded / file.size) * 100); var progress = new FileProgress(file, this.customSettings.upload_target); progress.setProgress(percent); if (percent === 100) { progress.setStatus("Creating thumbnail..."); progress.toggleCancel(false, this); } else { progress.setStatus("Uploading..."); progress.toggleCancel(true, this); } } catch (ex) { this.debug(ex); } } function uploadSuccess(file, serverData) { try { var progress = new FileProgress(file, this.customSettings.upload_target); if (serverData.substring(0, 7) === "FILEID:") { addRow("tableID","thumbnail.php?id=" + serverData.substring(7),file.name); //setup(); //generateTinyMCE('itemdescription[]'); progress.setStatus("Thumbnail Created."); progress.toggleCancel(false); } else { addImage("images/error.gif"); progress.setStatus("Error."); progress.toggleCancel(false); alert(serverData); } } catch (ex) { this.debug(ex); } } function uploadComplete(file) { try { /* I want the next upload to continue automatically so I'll call startUpload here */ if (this.getStats().files_queued 0) { this.startUpload(); } else { var progress = new FileProgress(file, this.customSettings.upload_target); progress.setComplete(); progress.setStatus("All images received."); progress.toggleCancel(false); } } catch (ex) { this.debug(ex); } } function uploadError(file, errorCode, message) { var imageName = "error.gif"; var progress; try { switch (errorCode) { case SWFUpload.UPLOAD_ERROR.FILE_CANCELLED: try { progress = new FileProgress(file, this.customSettings.upload_target); progress.setCancelled(); progress.setStatus("Cancelled"); progress.toggleCancel(false); } catch (ex1) { this.debug(ex1); } break; case SWFUpload.UPLOAD_ERROR.UPLOAD_STOPPED: try { progress = new FileProgress(file, this.customSettings.upload_target); progress.setCancelled(); progress.setStatus("Stopped"); progress.toggleCancel(true); } catch (ex2) { this.debug(ex2); } case SWFUpload.UPLOAD_ERROR.UPLOAD_LIMIT_EXCEEDED: imageName = "uploadlimit.gif"; break; default: alert(message); break; } addImage("images/" + imageName); } catch (ex3) { this.debug(ex3); } } function addRow(tableID,src,filename) { var table = document.getElementById(tableID); var rowCount = table.rows.length; var row = table.insertRow(rowCount); rowCount + 1; row.id = "row"+rowCount; var cell0 = row.insertCell(0); cell0.innerHTML = rowCount; cell0.style.background = "#FFFFFF"; var cell1 = row.insertCell(1); cell1.align = "center"; cell1.style.background = "#FFFFFF"; var imahe = document.createElement("img"); imahe.setAttribute("src",src); var hidden = document.createElement("input"); hidden.setAttribute("type","hidden"); hidden.setAttribute("name","filename[]"); hidden.setAttribute("value",filename); /*var hidden2 = document.createElement("input"); hidden2.setAttribute("type","hidden"); hidden2.setAttribute("name","filename[]"); hidden2.setAttribute("value",filename); cell1.appendChild(hidden2);*/ cell1.appendChild(hidden); cell1.appendChild(imahe); var cell2 = row.insertCell(2); cell2.align = "left"; cell2.valign = "top"; cell2.style.background = "#FFFFFF"; //tr1.appendChild(td1); var div2 = document.createElement("div"); div2.style.padding ="0 0 0 10px"; div2.style.width = "400px"; var alink = document.createElement("a"); //alink.style.margin="40px 0 0 0"; alink.href ="#"; alink.innerHTML ="Cancel"; alink.onclick= function () { document.getElementById(row.id).style.display='none'; document.getElementById(textfield.id).disabled='disabled'; }; var div = document.createElement("div"); div.style.margin="10px 0"; div.appendChild(alink); var textfield = document.createElement("input"); textfield.id = "file"+rowCount; textfield.type = "text"; textfield.name = "itemname[]"; textfield.style.margin = "10px 0"; textfield.style.width = "400px"; textfield.value = "Item Name"; textfield.onclick= function(){ //textfield.value=""; if(textfield.value=="Item Name") textfield.value=""; if(desc.innerHTML=="") desc.innerHTML ="Item Description"; if(price.value=="") price.value="Item Price"; } var desc = document.createElement("textarea"); desc.name = "itemdescription[]"; desc.cols = "80"; desc.rows = "4"; desc.innerHTML = "Item Description"; desc.onclick = function(){ if(desc.innerHTML== "Item Description") desc.innerHTML = ""; if(textfield.value=="Item name" || textfield.value=="") textfield.value="Item Name"; if(price.value=="") price.value="Item Price"; } var price = document.createElement("input"); price.id = "file"+rowCount; price.type = "text"; price.name = "itemprice[]"; price.style.margin = "10px 0"; price.style.width = "400px"; price.value = "Item Price"; price.onclick= function(){ if(price.value=="Item Price") price.value=""; if(desc.innerHTML=="") desc.innerHTML ="Item Description"; if(textfield.value=="") textfield.value="Item Name"; } var span = document.createElement("span"); span.innerHTML = "View"; span.style.width = "auto"; span.style.padding = "10px 0"; var view = document.createElement("input"); view.id = "file"+rowCount; view.type = "checkbox"; view.name = "publicview[]"; view.value = "y"; view.checked = "checked"; var div3 = document.createElement("div"); div3.appendChild(span); div3.appendChild(view); var div4 = document.createElement("div"); div4.style.padding = "10px 0"; var span2 = document.createElement("span"); span2.innerHTML = "Default Display"; span2.style.width = "auto"; span2.style.padding = "10px 0"; var radio = document.createElement("input"); radio.type = "radio"; radio.name = "setdefault"; radio.value = "y"; div4.appendChild(span2); div4.appendChild(radio); div2.appendChild(div); //div2.appendChild(label); //div2.appendChild(table); div2.appendChild(textfield); div2.appendChild(desc); div2.appendChild(price); div2.appendChild(div3); div2.appendChild(div4); cell2.appendChild(div2); } function addImage(src,val_id) { var newImg = document.createElement("img"); newImg.style.margin = "5px 50px 5px 5px"; newImg.style.display= "inline"; newImg.id=val_id; document.getElementById("thumbnails").appendChild(newImg); if (newImg.filters) { try { newImg.filters.item("DXImageTransform.Microsoft.Alpha").opacity = 0; } catch (e) { // If it is not set initially, the browser will throw an error. This will set it if it is not set yet. newImg.style.filter = 'progid:DXImageTransform.Microsoft.Alpha(opacity=' + 0 + ')'; } } else { newImg.style.opacity = 0; } newImg.onload = function () { fadeIn(newImg, 0); }; newImg.src = src; } function fadeIn(element, opacity) { var reduceOpacityBy = 5; var rate = 30; // 15 fps if (opacity < 100) { opacity += reduceOpacityBy; if (opacity > 100) { opacity = 100; } if (element.filters) { try { element.filters.item("DXImageTransform.Microsoft.Alpha").opacity = opacity; } catch (e) { // If it is not set initially, the browser will throw an error. This will set it if it is not set yet. element.style.filter = 'progid:DXImageTransform.Microsoft.Alpha(opacity=' + opacity + ')'; } } else { element.style.opacity = opacity / 100; } } if (opacity < 100) { setTimeout(function () { fadeIn(element, opacity); }, rate); } } /* ************************************** * FileProgress Object * Control object for displaying file info * ************************************** */ function FileProgress(file, targetID) { this.fileProgressID = "divFileProgress"; this.fileProgressWrapper = document.getElementById(this.fileProgressID); if (!this.fileProgressWrapper) { this.fileProgressWrapper = document.createElement("div"); this.fileProgressWrapper.className = "progressWrapper"; this.fileProgressWrapper.id = this.fileProgressID; this.fileProgressElement = document.createElement("div"); this.fileProgressElement.className = "progressContainer"; var progressCancel = document.createElement("a"); progressCancel.className = "progressCancel"; progressCancel.href = "#"; progressCancel.style.visibility = "hidden"; progressCancel.appendChild(document.createTextNode(" ")); var progressText = document.createElement("div"); progressText.className = "progressName"; progressText.appendChild(document.createTextNode(file.name)); var progressBar = document.createElement("div"); progressBar.className = "progressBarInProgress"; var progressStatus = document.createElement("div"); progressStatus.className = "progressBarStatus"; progressStatus.innerHTML = "&nbsp;"; this.fileProgressElement.appendChild(progressCancel); this.fileProgressElement.appendChild(progressText); this.fileProgressElement.appendChild(progressStatus); this.fileProgressElement.appendChild(progressBar); this.fileProgressWrapper.appendChild(this.fileProgressElement); document.getElementById(targetID).appendChild(this.fileProgressWrapper); fadeIn(this.fileProgressWrapper, 0); } else { this.fileProgressElement = this.fileProgressWrapper.firstChild; this.fileProgressElement.childNodes[1].firstChild.nodeValue = file.name; } this.height = this.fileProgressWrapper.offsetHeight; } FileProgress.prototype.setProgress = function (percentage) { this.fileProgressElement.className = "progressContainer green"; this.fileProgressElement.childNodes[3].className = "progressBarInProgress"; this.fileProgressElement.childNodes[3].style.width = percentage + "%"; }; FileProgress.prototype.setComplete = function () { this.fileProgressElement.className = "progressContainer blue"; this.fileProgressElement.childNodes[3].className = "progressBarComplete"; this.fileProgressElement.childNodes[3].style.width = ""; }; FileProgress.prototype.setError = function () { this.fileProgressElement.className = "progressContainer red"; this.fileProgressElement.childNodes[3].className = "progressBarError"; this.fileProgressElement.childNodes[3].style.width = ""; }; FileProgress.prototype.setCancelled = function () { this.fileProgressElement.className = "progressContainer"; this.fileProgressElement.childNodes[3].className = "progressBarError"; this.fileProgressElement.childNodes[3].style.width = ""; }; FileProgress.prototype.setStatus = function (status) { this.fileProgressElement.childNodes[2].innerHTML = status; }; FileProgress.prototype.toggleCancel = function (show, swfuploadInstance) { this.fileProgressElement.childNodes[0].style.visibility = show ? "visible" : "hidden"; if (swfuploadInstance) { var fileID = this.fileProgressID; this.fileProgressElement.childNodes[0].onclick = function () { swfuploadInstance.cancelUpload(fileID); return false; }; } }; i am using a swfuploader an i jst added a input fields and a textarea when it preview the images which ready to be uploaded and from my html i have this script var swfu; window.onload = function () { swfu = new SWFUpload({ // Backend Settings upload_url: "../we_modules/upload.php", // Relative to the SWF file or absolute post_params: {"PHPSESSID": ""}, // File Upload Settings file_size_limit : "20 MB", // 2MB file_types : "*.*", //file_types : "", file_types_description : "jpg", file_upload_limit : "0", file_queue_limit : "0", // Event Handler Settings - these functions as defined in Handlers.js // The handlers are not part of SWFUpload but are part of my website and control how // my website reacts to the SWFUpload events. //file_queued_handler : fileQueued, file_queue_error_handler : fileQueueError, file_dialog_complete_handler : fileDialogComplete, upload_progress_handler : uploadProgress, upload_error_handler : uploadError, upload_success_handler : uploadSuccess, upload_complete_handler : uploadComplete, // Button Settings button_image_url : "../we_modules/images/SmallSpyGlassWithTransperancy_17x18.png", // Relative to the SWF file button_placeholder_id : "spanButtonPlaceholder", button_width: 180, button_height: 18, button_text : 'Select Files(2 MB Max)', button_text_style : '.button { font-family: Helvetica, Arial, sans-serif; font-size: 12pt;cursor:pointer } .buttonSmall { font-size: 10pt; }', button_text_top_padding: 0, button_text_left_padding: 18, button_window_mode: SWFUpload.WINDOW_MODE.TRANSPARENT, button_cursor: SWFUpload.CURSOR.HAND, // Flash Settings flash_url : "../swfupload/swfupload.swf", custom_settings : { upload_target : "divFileProgressContainer" }, // Debug Settings debug: false }); }; where should i put on the tinymce function as you mention below?

    Read the article

  • AGENT: The World's Smartest Watch

    - by Rob Chartier
    AGENT: The World's Smartest Watch by Secret Labs + House of Horology Disclaimer: Most if not all of this content has been gleaned from the comments on the Kickstarter project page and comments section. Any discrepancies between this post and any documentation on agentwatches.com, kickstarter.com, etc.., those official sites take precedence. Overview The next generation smartwatch with brand-new technology. World-class developer tools, unparalleled battery life, Qi wireless charging. Kickstarter Page, Comments Funding period : May 21, 2013 - Jun 20, 2013 MSRP : $249 Other Urls http://www.agentwatches.com/ https://www.facebook.com/agentwatches http://twitter.com/agentwatches http://pinterest.com/agentwatches/ http://paper.li/robchartier/1371234640 Developer Story The first official launch of the preview SDK and emulator will happen on 20-Jun-2013.  All development will be done in Visual Studio 2012, using the .NET Micro Framework SDK 2.3.  The SDK will ship with the first round of the expected API for developers along with an emulator. With that said, there is no need to wait for the SDK.  You can download the tooling now and get started with Apps and Faces immediately.  The only thing that you will not be able to work with is the API; but for example, watch faces, you can start building the basic face rendering with the Bitmap graphics drawing in the .NET Micro Framework.   Does it look good? Before we dig into any more of the gory details, here are a few photos of the current available prototype models.   The watch on the tiny QI Charter   If you wander too far away from your phone, your watch will let you know with a vibration and a message, all but one button will dismiss the message.   An app showing the premium weather data!   Nice stitching on the straps, leather and silicon will be available, along with a few lengths to choose from (short, regular, long lengths). On to those gory details…. Hardware Specs Processor 120MHz ARM Cortex-M4 processor (ATSAM4SD32) with secondary AVR co-processor Flash & RAM 2MB of onboard flash and 160KB of RAM 1/4 of the onboard flash will be used by the OS The flash is permanent (non-volatile) storage. Bluetooth Bluetooth 4.0 BD/EDR + LE Bluetooth 4.0 is backwards compatible with Bluetooth 2.1, so classic Bluetooth functions (BD/EDR, SPP/AVRCP/PBAP/etc.) will work fine. Sensors 3D Accelerometer (Motion) ST LSM303DLHC Ambient Light Sensor Hardware power metering Vibration Motor (You can pulse it to create vibration patterns, not sure about the vibration strength - driven with PWM) No piezo/speaker or microphone. Other QI Wireless Charging, no NFC, no wall adapter included Custom LED Backlight No GPS in the watch. It uses the GPS in your phone. AGENT watch apps are deployed and debugged wirelessly from your PC via Bluetooth. RoHS, Pb-free Battery Expected to use a CR2430-sized rechargeable battery – replaceable (Mouser, Amazon) Estimated charging time from empty is 2 hours with provided charger 7 Days typical with Bluetooth on, 30 days with Bluetooth off (watch-face only mode) The battery should last at least 2 years, with 100s of charge cycles. Physical dimensions Roughly 38mm top-to-bottom on the front face 35mm left-to-right on the front face and around 12mm in depth 22mm strap Two ~1/16" hex screws to attach the watch pin The top watchcase material candidates are PVD stainless steel, brushed matte ceramic, and high-quality polycarbonate (TBD). The glass lens is mineral glass, Anti-glare glass lens Strap options Leather and silicon straps will be available Expected to have three sizes Display 1.28" Sharp Memory Display The display stays on 100% of the time. Dimensions: 128x128 pixels Buttons Custom "Pusher" buttons, they will not make noise like a mouse click, and are very durable. The top-left button activates the backlight; bottom-left changes apps; three buttons on the right are up/select/down and can be used for custom purposes by apps. Backup reset procedure is currently activated by holding the home/menu button and the top-right user button for about ten seconds Device Support Android 2.3 or newer iPhone 4S or newer Windows Phone 8 or newer Heart Rate monitors - Bluetooth SPP or Bluetooth LE (GATT) is what you'll want the heart monitor to support. Almost limitless Bluetooth device support! Internationalization & Localization Full UTF8 Support from the ground up. AGENT's user interface is in English. Your content (caller ID, music tracks, notifications) will be in your native language. We have a plan to cover most major character sets, with Latin characters pre-loaded on the watch. Simplified Chinese will be available Feature overview Phone lost alert Caller ID Music Control (possible volume control) Wireless Charging Timer Stopwatch Vibrating Alarm (possibly custom vibrations for caller id) A few default watch faces Airplane mode (by demand or low power) Can be turned off completely Customizable 3rd party watch faces, applications which can be loaded over bluetooth. Sample apps that maybe installed Weather Sample Apps not installed Exercise App Other Possible Skype integration over Bluetooth. They will provide an AGENT app for your smartphone (iPhone, Android, Windows Phone). You'll be able to use it to load apps onto the watch.. You will be able to cancel phone calls. With compatible phones you can also answer, end, etc. They are adopting the standard hands-free profile to provide these features and caller ID.

    Read the article

  • September 2011 Release of the Ajax Control Toolkit

    - by Stephen Walther
    I’m happy to announce the release of the September 2011 Ajax Control Toolkit. This release has several important new features including: Date ranges – When using the Calendar extender, you can specify a start and end date and a user can pick only those dates which fall within the specified range. This was the fourth top-voted feature request for the Ajax Control Toolkit at CodePlex. Twitter Control – You can use the new Twitter control to display recent tweets associated with a particular Twitter user or tweets which match a search query. Gravatar Control – You can use the new Gravatar control to display a unique image for each user of your website. Users can upload custom images to the Gravatar.com website or the Gravatar control can display a unique, auto-generated, image for a user. You can download this release this very minute by visiting CodePlex: http://AjaxControlToolkit.CodePlex.com Alternatively, you can execute the following command from the Visual Studio NuGet console: Improvements to the Ajax Control Toolkit Calendar Control The Ajax Control Toolkit Calendar extender control is one of the most heavily used controls from the Ajax Control Toolkit. The developers on the Superexpert team spent the last sprint focusing on improving this control. There are three important changes that we made to the Calendar control: we added support for date ranges, we added support for highlighting today’s date, and we made fixes to several bugs related to time zones and daylight savings. Using Calendar Date Ranges One of the top-voted feature requests for the Ajax Control Toolkit was a request to add support for date ranges to the Calendar control (this was the fourth most voted feature request at CodePlex). With the latest release of the Ajax Control Toolkit, the Calendar extender now supports date ranges. For example, the following page illustrates how you can create a popup calendar which allows a user only to pick dates between March 2, 2009 and May 16, 2009. <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="CalendarDateRange.aspx.cs" Inherits="WebApplication1.CalendarDateRange" %> <%@ Register TagPrefix="asp" Namespace="AjaxControlToolkit" Assembly="AjaxControlToolkit" %> <html> <head runat="server"> <title>Calendar Date Range</title> </head> <body> <form id="form1" runat="server"> <asp:ToolkitScriptManager ID="tsm" runat="server" /> <asp:TextBox ID="txtHotelReservationDate" runat="server" /> <asp:CalendarExtender ID="Calendar1" TargetControlID="txtHotelReservationDate" StartDate="3/2/2009" EndDate="5/16/2009" SelectedDate="3/2/2009" runat="server" /> </form> </body> </html> This page contains three controls: an Ajax Control Toolkit ToolkitScriptManager control, a standard ASP.NET TextBox control, and an Ajax Control Toolkit CalendarExtender control. Notice that the Calendar control includes StartDate and EndDate properties which restrict the range of valid dates. The Calendar control shows days, months, and years outside of the valid range as struck out. You cannot select days, months, or years which fall outside of the range. The following video illustrates interacting with the new date range feature: If you want to experiment with a live version of the Ajax Control Toolkit Calendar extender control then you can visit the Calendar Sample Page at the Ajax Control Toolkit Sample Site. Highlighted Today’s Date Another highly requested feature for the Calendar control was support for highlighting today’s date. The Calendar control now highlights the user’s current date regardless of the user’s time zone. Fixes to Time Zone and Daylight Savings Time Bugs We fixed several significant Calendar extender bugs related to time zones and daylight savings time. For example, previously, when you set the Calendar control’s SelectedDate property to the value 1/1/2007 then the selected data would appear as 12/31/2006 or 1/1/2007 or 1/2/2007 depending on the server time zone. For example, if your server time zone was set to Samoa (UTC-11:00), then setting SelectedDate=”1/1/2007” would result in “12/31/2006” being selected in the Calendar. Users of the Calendar extender control found this behavior confusing. After careful consideration, we decided to change the Calendar extender so that it interprets all dates as UTC dates. In other words, if you set StartDate=”1/1/2007” then the Calendar extender parses the date as 1/1/2007 UTC instead of parsing the date according to the server time zone. By interpreting all dates as UTC dates, we avoid all of the reported issues with the SelectedDate property showing the wrong date. Furthermore, when you set the StartDate and EndDate properties, you know that the same StartDate and EndDate will be selected regardless of the time zone associated with the server or associated with the browser. The date 1/1/2007 will always be the date 1/1/2007. The New Twitter Control This release of the Ajax Control Toolkit introduces a new twitter control. You can use the Twitter control to display recent tweets associated with a particular twitter user. You also can use this control to show the results of a twitter search. The following page illustrates how you can use the Twitter control to display recent tweets made by Scott Hanselman: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="TwitterProfile.aspx.cs" Inherits="WebApplication1.TwitterProfile" %> <%@ Register TagPrefix="asp" Namespace="AjaxControlToolkit" Assembly="AjaxControlToolkit" %> <html > <head runat="server"> <title>Twitter Profile</title> </head> <body> <form id="form1" runat="server"> <asp:ToolkitScriptManager ID="tsm" runat="server" /> <asp:Twitter ID="Twitter1" ScreenName="shanselman" runat="server" /> </form> </body> </html> This page includes two Ajax Control Toolkit controls: the ToolkitScriptManager control and the Twitter control. The Twitter control is set to display tweets from Scott Hanselman (shanselman): You also can use the Twitter control to display the results of a search query. For example, the following page displays all recent tweets related to the Ajax Control Toolkit: Twitter limits the number of times that you can interact with their API in an hour. Twitter recommends that you cache results on the server (https://dev.twitter.com/docs/rate-limiting). By default, the Twitter control caches results on the server for a duration of 5 minutes. You can modify the cache duration by assigning a value (in seconds) to the Twitter control's CacheDuration property. The Twitter control wraps a standard ASP.NET ListView control. You can customize the appearance of the Twitter control by modifying its LayoutTemplate, StatusTemplate, AlternatingStatusTemplate, and EmptyDataTemplate. To learn more about the new Twitter control, visit the live Twitter Sample Page. The New Gravatar Control The September 2011 release of the Ajax Control Toolkit also includes a new Gravatar control. This control makes it easy to display a unique image for each user of your website. A Gravatar is associated with an email address. You can visit Gravatar.com and upload an image and associate the image with your email address. That way, every website which uses Gravatars (such as the www.ASP.NET website) will display your image next to your name. For example, I visited the Gravatar.com website and associated an image of a Koala Bear with the email address [email protected]. The following page illustrates how you can use the Gravatar control to display the Gravatar image associated with the [email protected] email address: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="GravatarDemo.aspx.cs" Inherits="WebApplication1.GravatarDemo" %> <%@ Register TagPrefix="asp" Namespace="AjaxControlToolkit" Assembly="AjaxControlToolkit" %> <html xmlns="http://www.w3.org/1999/xhtml"> <head id="Head1" runat="server"> <title>Gravatar Demo</title> </head> <body> <form id="form1" runat="server"> <asp:ToolkitScriptManager ID="tsm" runat="server" /> <asp:Gravatar ID="Gravatar1" Email="[email protected]" runat="server" /> </form> </body> </html> The page above simply displays the Gravatar image associated with the [email protected] email address: If a user has not uploaded an image to Gravatar.com then you can auto-generate a unique image for the user from the user email address. The Gravatar control supports four types of auto-generated images: Identicon -- A different geometric pattern is generated for each unrecognized email. MonsterId -- A different image of a monster is generated for each unrecognized email. Wavatar -- A different image of a face is generated for each unrecognized email. Retro -- A different 8-bit arcade-style face is generated for each unrecognized email. For example, there is no Gravatar image associated with the email address [email protected]. The following page displays an auto-generated MonsterId for this email address: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="GravatarMonster.aspx.cs" Inherits="WebApplication1.GravatarMonster" %> <%@ Register TagPrefix="asp" Namespace="AjaxControlToolkit" Assembly="AjaxControlToolkit" %> <html xmlns="http://www.w3.org/1999/xhtml"> <head id="Head1" runat="server"> <title>Gravatar Monster</title> </head> <body> <form id="form1" runat="server"> <asp:ToolkitScriptManager ID="tsm" runat="server" /> <asp:Gravatar ID="Gravatar1" Email="[email protected]" DefaultImageBehavior="MonsterId" runat="server" /> </form> </body> </html> The page above generates the following image automatically from the supplied email address: To learn more about the properties of the new Gravatar control, visit the live Gravatar Sample Page. ASP.NET Connections Talk on the Ajax Control Toolkit If you are interested in learning more about the changes that we are making to the Ajax Control Toolkit then please come to my talk on the Ajax Control Toolkit at the upcoming ASP.NET Connections conference. In the talk, I will present a summary of the changes that we have made to the Ajax Control Toolkit over the last several months and discuss our future plans. Do you have ideas for new Ajax Control Toolkit controls? Ideas for improving the toolkit? Come to my talk – I would love to hear from you. You can register for the ASP.NET Connections conference by visiting the following website: Register for ASP.NET Connections   Summary The previous release of the Ajax Control Toolkit – the July 2011 Release – has had over 100,000 downloads. That is a huge number of developers who are working with the Ajax Control Toolkit. We are really excited about the new features which we added to the Ajax Control Toolkit in the latest September sprint. We hope that you find the updated Calender control, the new Twitter control, and the new Gravatar control valuable when building your ASP.NET Web Forms applications.

    Read the article

  • SQLAuthority News – Author Visit Review – TechMela Nepal – March 29-30, 2010

    - by pinaldave
    I was very fortunate to attend TechMela at Kathmandu, Nepal on 29th and 30th of March 2010. I would like to thank Allen Bailochan Tuladhar from Microsoft MDP Nepal for inviting me. Allen is a person with seemingly infinite energy and unlimited passion for Microsoft Technology. If you get an opportunity to spend just one hour with him, you will surely be more enthusiastic with regards to Microsoft Technology. And, I was lucky enough that I was able to spend about a total of 9 days with him in Kathmandu, working along with him in the Tech Community. TechMela Nepal Pinal at TechMela, Nepal TechMela is considered as one of the biggest events in Nepal, having been organized by Microsoft MDP Nepal. This event was attended by around 500 students and hundreds of Tech professionals. The event was handled very professionally and at very large scale. Every minor detail was properly planned and obviously thought out well. There were around 50+ volunteers from MS MDP who were monitoring this event systematically to make sure the event would run as smooth as planned. Attendees in Geek T-Shirts During this event, I was delighted to meet David Lim of Microsoft Singapore. He is very passionate in working for Microsoft Technology, as well as building deep relations with the Community. I was fortunate to spend my entire afternoon with him during the sight-seeing trip. We discussed various MS technologies and their community’s adoption as well as the way how each of us can be a part of the community activity. He also delivered excellent keynotes at the event. I must say that this is one of the most enjoyable keynotes I have ever attended. It was interesting and interactive, and I must say that I had the 70s feelings with all the fonts and graphics. I still remember him saying, “Yeah, I was a student and I know you.” Allen Tuladhar, David Lim, Pinal Dave and Guests After the keynote, everybody cheered when Allen came on stage to talk about the event and to introduce the agenda for the next two days. I must say that Allen is one of the most well-known people in Nepal. I was impressed with his popularity, and to prove this, when he got on the stage he had to wait for a long full minute before he was able to greet “Welcome” while the attendees were clapping and cheering. Technology Panelist at Techmela Kathmandu, Nepal This event was blessed with the top-of-the-top officials of various IT industries, Nepal ministries and the US Embassy. All the prominent personalities were present for panel discussion on the stage. The talk was done on various subjects. Also, the energy level which was set by Allen really echoed in the audience as they asked certain questions on different global as well local IT-related questions. The panel discussion really was discussion instead of usual monologue of one person. Pinal Dave presenting at TechMela Kathmandu, Nepal This was a two-day event and my session was on either of the day. I had a great participation from the audience on both days. The place where the event was organized had a capacity of around 500+ audience. Both of my sessions were heavily attended and volunteers did a fabulous job helping the attendees find empty seats or arrange some additional seats. I was overwhelmed with the interaction I have received in the large hall. Attendees were not so shy to express their thoughts, so both the sessions were followed up by top notch one-on-one conversations for a couple of hours. Pinal Dave presenting at TechMela Kathmandu, Nepal Pinal Dave presenting at TechMela Kathmandu, Nepal There are many questions that I have received during the event, and many of them can be interesting for all of us here so I will write detailed blog posts on these subjects. I also tried to participate in the gaming activities held at the event, but I felt I was kind of lost even if I was only playing for the very first minutes. This made me realize that I am really getting old for video games. Allen presenting at TechMela Kathmandu, Nepal Allen’s session on Digital Photography was very impressive as he demonstrated so many features of the Windows Live Product that at one point I felt he is MVP for Windows Live. In fact, he demonstrated how all the Microsoft products work together to give users an excellent desktop experience; no wonder he is an MVP for Windows Desktop Experience. Pinal Dave presending at TechMela Kathmandu, Nepal Any event has two common dilemmas – food and logistics. However, this event had excellent food and state-of-the-art organization. I was very glad that this two-day event turned out to be one of the most successful events in Nepal. I also noticed that almost all attendees rate their experience as beyond expectation and truly exceptional. Pinal Dave and Allen Bailochan Tuladhar If you ever get invited by Allen in any of his event, I strongly suggest that you drop all your plans and scheduled stuff, and accept his invitation. For sure, the event will be a very memorable one and would be your once-in-a-lifetime experience. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: MVP, Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, T SQL, Technology

    Read the article

  • SQLAuthority News – Author Visit Review – TechMela Nepal – March 29-30, 2010

    - by pinaldave
    I was very fortunate to attend TechMela at Kathmandu, Nepal on 29th and 30th of March 2010. I would like to thank Allen Bailochan Tuladhar from Microsoft MDP Nepal for inviting me. Allen is a person with seemingly infinite energy and unlimited passion for Microsoft Technology. If you get an opportunity to spend just one hour with him, you will surely be more enthusiastic with regards to Microsoft Technology. And, I was lucky enough that I was able to spend about a total of 9 days with him in Kathmandu, working along with him in the Tech Community. TechMela Nepal Pinal at TechMela, Nepal TechMela is considered as one of the biggest events in Nepal, having been organized by Microsoft MDP Nepal. This event was attended by around 500 students and hundreds of Tech professionals. The event was handled very professionally and at very large scale. Every minor detail was properly planned and obviously thought out well. There were around 50+ volunteers from MS MDP who were monitoring this event systematically to make sure the event would run as smooth as planned. Attendees in Geek T-Shirts During this event, I was delighted to meet David Lim of Microsoft Singapore. He is very passionate in working for Microsoft Technology, as well as building deep relations with the Community. I was fortunate to spend my entire afternoon with him during the sight-seeing trip. We discussed various MS technologies and their community’s adoption as well as the way how each of us can be a part of the community activity. He also delivered excellent keynotes at the event. I must say that this is one of the most enjoyable keynotes I have ever attended. It was interesting and interactive, and I must say that I had the 70s feelings with all the fonts and graphics. I still remember him saying, “Yeah, I was a student and I know you.” Allen Tuladhar, David Lim, Pinal Dave and Guests After the keynote, everybody cheered when Allen came on stage to talk about the event and to introduce the agenda for the next two days. I must say that Allen is one of the most well-known people in Nepal. I was impressed with his popularity, and to prove this, when he got on the stage he had to wait for a long full minute before he was able to greet “Welcome” while the attendees were clapping and cheering. Technology Panelist at Techmela Kathmandu, Nepal This event was blessed with the top-of-the-top officials of various IT industries, Nepal ministries and the US Embassy. All the prominent personalities were present for panel discussion on the stage. The talk was done on various subjects. Also, the energy level which was set by Allen really echoed in the audience as they asked certain questions on different global as well local IT-related questions. The panel discussion really was discussion instead of usual monologue of one person. Pinal Dave presending at TechMela Kathmandu, Nepal This was a two-day event and my session was on either of the day. I had a great participation from the audience on both days. The place where the event was organized had a capacity of around 500+ audience. Both of my sessions were heavily attended and volunteers did a fabulous job helping the attendees find empty seats or arrange some additional seats. I was overwhelmed with the interaction I have received in the large hall. Attendees were not so shy to express their thoughts, so both the sessions were followed up by top notch one-on-one conversations for a couple of hours. Pinal Dave presending at TechMela Kathmandu, Nepal Pinal Dave presending at TechMela Kathmandu, Nepal Pinal Dave presending at TechMela Kathmandu, Nepal There are many questions that I have received during the event, and many of them can be interesting for all of us here so I will write detailed blog posts on these subjects. I also tried to participate in the gaming activities held at the event, but I felt I was kind of lost even if I was only playing for the very first minutes. This made me realize that I am really getting old for video games. Allen presending at TechMela Kathmandu, Nepal Allen’s session on Digital Photography was very impressive as he demonstrated so many features of the Windows Live Product that at one point I felt he is MVP for Windows Live. In fact, he demonstrated how all the Microsoft products work together to give users an excellent desktop experience; no wonder he is an MVP for Windows Desktop Experience. Pinal Dave presending at TechMela Kathmandu, Nepal Any event has two common dilemmas – food and logistics. However, this event had excellent food and state-of-the-art organization. I was very glad that this two-day event turned out to be one of the most successful events in Nepal. I also noticed that almost all attendees rate their experience as beyond expectation and truly exceptional. Pinal Dave and Allen Bailochan Tuladhar If you ever get invited by Allen in any of his event, I strongly suggest that you drop all your plans and scheduled stuff, and accept his invitation. For sure, the event will be a very memorable one and would be your once-in-a-lifetime experience. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: MVP, Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, T SQL, Technology

    Read the article

  • Computer Networks UNISA - Chap 12 &ndash; Networking Security

    - by MarkPearl
    After reading this section you should be able to Identify security risks in LANs and WANs and design security policies that minimize risks Explain how physical security contributes to network security Discuss hardware and design based security techniques Understand methods of encryption such as SSL and IPSec, that can secure data in storage and in transit Describe how popular authentication protocols such as RADIUS< TACACS,Kerberos, PAP, CHAP, and MS-CHAP function Use network operating system techniques to provide basic security Understand wireless security protocols such as WEP, WPA and 802.11i Security Audits Before spending time and money on network security, examine your networks security risks – rate and prioritize risks. Different organizations have different levels of network security requirements. Security Risks Not all security breaches result from a manipulation of network technology – there are human factors that can play a role as well. The following categories are areas of considerations… Risks associated with People Risks associated with Transmission and Hardware Risks associated with Protocols and Software Risks associated with Internet Access An effective security policy A security policy identifies your security goals, risks, levels of authority, designated security coordinator and team members, responsibilities for each team member, and responsibilities for each employee. In addition it specifies how to address security breaches. It should not state exactly which hardware, software, architecture, or protocols will be used to ensure security, nor how hardware or software will be installed and configured. A security policy must address an organizations specific risks. to understand your risks, you should conduct a security audit that identifies vulnerabilities and rates both the severity of each threat and its likelihood of occurring. Security Policy Content Security policy content should… Policies for each category of security Explain to users what they can and cannot do and how these measures protect the networks security Should define what confidential means to the organization Response Policy A security policy should provide for a planned response in the event of a security breach. The response policy should identify the members of a response team, all of whom should clearly understand the the security policy, risks, and measures in place. Some of the roles concerned could include… Dispatcher – the person on call who first notices the breach Manager – the person who coordinates the resources necessary to solve the problem Technical Support Specialist – the person who focuses on solving the problem Public relations specialist – the person who acts as the official spokesperson for the organization Physical Security An important element in network security is restricting physical access to its components. There are various techniques for this including locking doors, security people at access points etc. You should identify the following… Which rooms contain critical systems or data and must be secured Through what means might intruders gain access to these rooms How and to what extent are authorized personnel granted access to these rooms Are authentication methods such as ID cards easy to forge etc. Security in Network Design The optimal way to prevent external security breaches from affecting you LAN is not to connect your LAN to the outside world at all. The next best protection is to restrict access at every point where your LAN connects to the rest of the world. Router Access List – can be used to filter or decline access to a portion of a network for certain devices. Intrusion Detection and Prevention While denying someone access to a section of the network is good, it is better to be able to detect when an attempt has been made and notify security personnel. This can be done using IDS (intrusion detection system) software. One drawback of IDS software is it can detect false positives – i.e. an authorized person who has forgotten his password attempts to logon. Firewalls A firewall is a specialized device, or a computer installed with specialized software, that selectively filters or blocks traffic between networks. A firewall typically involves a combination of hardware and software and may reside between two interconnected private networks. The simplest form of a firewall is a packet filtering firewall, which is a router that examines the header of every packet of data it receives to determine whether that type of packet is authorized to continue to its destination or not. Firewalls can block traffic in and out of a LAN. NOS (Network Operating System) Security Regardless of the operating system, generally every network administrator can implement basic security by restricting what users are authorized to do on a network. Some of the restrictions include things related to Logons – place, time of day, total time logged in, etc Passwords – length, characters used, etc Encryption Encryption is the use of an algorithm to scramble data into a format that can be read only by reversing the algorithm. The purpose of encryption is to keep information private. Many forms of encryption exist and new ways of cracking encryption are continually being invented. The following are some categories of encryption… Key Encryption PGP (Pretty Good Privacy) SSL (Secure Sockets Layer) SSH (Secure Shell) SCP (Secure CoPy) SFTP (Secure File Transfer Protocol) IPSec (Internet Protocol Security) For a detailed explanation on each section refer to pages 596 to 604 of textbook Authentication Protocols Authentication protocols are the rules that computers follow to accomplish authentication. Several types exist and the following are some of the common authentication protocols… RADIUS and TACACS PAP (Password Authentication Protocol) CHAP and MS-CHAP EAP (Extensible Authentication Protocol) 802.1x (EAPoL) Kerberos Wireless Network Security Wireless transmissions are particularly susceptible to eavesdropping. The following are two wireless network security protocols WEP WPA

    Read the article

  • Commercial Drupal Modules & Themes

    - by Ravish
    A discussion at Drupal.org forums prompted me to give my input about commercial ecosystem around Open Source Content Management Systems. WordPress and Joomla have been growing rapidly since past few years. But, growth rate of Drupal seems to be almost flat. Despite being the most powerful CMS around, Drupal is still not being adopted by masses. Many people will argue that Drupal is not targeted towards masses, but developers. I agree, Drupal is more of a development platform than a consumer CMS. Drupal is ‘many things to many people’, and I can build almost any type of website with it. Drupal is being used for building blogs, corporate websites, Intranet portals, social networking and even a project management system. Looking at the wide array of Drupal implementations, it deserves to be the most widely adopted CMS. I believe there are few challenges that Drupal community needs to overcome. To understand these challenges, I surveyed some webmasters who use Joomla or WordPress but not Drupal. I asked them why they don’t want to use Drupal, following are the responses I got from them: Drupal is too complicated, takes time to learn. Drupal is great, but its admin panel is overwhelming. I couldn’t find any nice themes for Drupal. There is no WYSIWYG editor in Drupal. Most Drupal modules do not work out of the box. There aren’t enough modules like Ubercart which provides any out of the box functionality. I tried modules like CCK, Views and Panels. After wasting several hours struggling with them, I decided to give up on Drupal. I don’t use Drupal because of pushbutton and Garland theme. I had hard time trying to customize Garland and it messed up the whole layout. There are no premium modules and themes for Drupal. Joomla has tons of awesome themes and modules. I don’t want a million hacks like CCK, Views, Tokens, Pathauto, ImageCache and CTools just to run a simple website. Most of the complaints from users are related to the learning and development curve involved with Drupal, and the lack of ecosystem. While most of the problems will be gone in Drupal 7, ecosystem is something that needs to be built by the Drupal community. Drupal distributions are a great step forward. There are few awesome Drupal distributions available like Open Publish, Open Atrium and Drupal Commons. I predict, there will be a wave of many powerful Drupal distributions after Drupal 7 release. Many of them will be user-friendly and commercial supported. Following is my post at Drupal.org forums: Quote from: http://drupal.org/node/863776#comment-3313836 Brian Gardner (StudioPress) and Woo Themes launched premium WordPress themes in 2007, the developer community did not accept it at first. Moreover, they were not even GPL licensed. There was an outcry in WordPress community against them. Following that, most premium theme providers switched to GPL licensing. Despite controversies, users voted for premium theme and plugins by buying them. Inspired by their success, hundreds of other developers started to sell premium themes and plugins. It is now the acceptable and in fact most popular business model among WordPress community. Matt Mullenweg once told me, they would not support premium themes. If he supported, developers would no more give out free GPL themes & plugins. He pointed me towards Joomla, there were hardly any nice free themes & modules available. Now two years forward, premium products are not just accepted but embraced by the WordPress community – http://wordpress.org/extend/themes/commercial/ The quality and number of themes & modules has increased, even the free ones. This also helped to boost the adoption and ecosystem of WordPress. Today, state of Drupal is like WordPress was in 2007. There are hardly any out of the box solutions available for Drupal. Ubercart, Open Publish and Open Atrium are the only ones I can think of. Many of the popular Drupal modules are patches and hole-fillers. Thankfully, these hole-filler modules are going to be in Drupal 7 core. Drupal 7 and distributions will spawn a new array of solutions built upon Drupal. Soon, we will have more like Ubercarts and Open Atriums. If commercial solutions can help fuel this ecosystem and growth, Drupal community will accept them eventually. This debate will not stop your customers from buying your product. If your product is awesome, they will vote for you by buying your product.

    Read the article

  • Problem with RAID5 (mdadm) - disk detached

    - by poscaman
    Having these lines in /var/log/syslog Apr 18 16:53:05 Server kernel: [4487878.816036] ata4: EH in SWNCQ mode,QC:qc_active 0x1 sactive 0x1 Apr 18 16:53:05 Server kernel: [4487878.816058] ata4: SWNCQ:qc_active 0x1 defer_bits 0x0 last_issue_tag 0x0 Apr 18 16:53:05 Server kernel: [4487878.816059] dhfis 0x1 dmafis 0x1 sdbfis 0x0 Apr 18 16:53:05 Server kernel: [4487878.816093] ata4: ATA_REG 0x40 ERR_REG 0x0 Apr 18 16:53:05 Server kernel: [4487878.816108] ata4: tag : dhfis dmafis sdbfis sacitve Apr 18 16:53:05 Server kernel: [4487878.816125] ata4: tag 0x0: 1 1 0 1 Apr 18 16:53:05 Server kernel: [4487878.816150] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen Apr 18 16:53:05 Server kernel: [4487878.816178] ata4.00: failed command: WRITE FPDMA QUEUED Apr 18 16:53:05 Server kernel: [4487878.816199] ata4.00: cmd 61/08:00:00:88:e0/00:00:e8:00:00/40 tag 0 ncq 4096 out Apr 18 16:53:05 Server kernel: [4487878.816200] res 40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) Apr 18 16:53:05 Server kernel: [4487878.816253] ata4.00: status: { DRDY } Apr 18 16:53:05 Server kernel: [4487878.816272] ata4: hard resetting link Apr 18 16:53:05 Server kernel: [4487878.816274] ata4: nv: skipping hardreset on occupied port Apr 18 16:53:06 Server kernel: [4487879.676029] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 18 16:53:07 Server kernel: [4487880.416749] ata4.00: n_sectors mismatch 3907029168 != 268435455 Apr 18 16:53:07 Server kernel: [4487880.416752] ata4.00: revalidation failed (errno=-19) Apr 18 16:53:07 Server kernel: [4487880.416773] ata4.00: limiting speed to UDMA/133:PIO2 Apr 18 16:53:11 Server kernel: [4487884.676024] ata4: hard resetting link Apr 18 16:53:11 Server kernel: [4487884.676027] ata4: nv: skipping hardreset on occupied port Apr 18 16:53:12 Server kernel: [4487885.144032] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 18 16:53:12 Server kernel: [4487885.240185] ata4.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80) Apr 18 16:53:12 Server kernel: [4487885.240190] ata4.00: revalidation failed (errno=-5) Apr 18 16:53:12 Server kernel: [4487885.240210] ata4.00: disabled Apr 18 16:53:17 Server kernel: [4487890.144023] ata4: hard resetting link Apr 18 16:53:17 Server kernel: [4487891.024033] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 18 16:53:17 Server kernel: [4487891.033357] ata4.00: ATA-8: WDC WD20EARS-00S8B1, 80.00A80, max UDMA/133 Apr 18 16:53:17 Server kernel: [4487891.033360] ata4.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 31/32) Apr 18 16:53:17 Server kernel: [4487891.048347] ata4.00: configured for UDMA/133 Apr 18 16:53:17 Server kernel: [4487891.048361] sd 3:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Apr 18 16:53:17 Server kernel: [4487891.048365] sd 3:0:0:0: [sdc] Sense Key : Aborted Command [current] [descriptor] Apr 18 16:53:17 Server kernel: [4487891.048369] Descriptor sense data with sense descriptors (in hex): Apr 18 16:53:17 Server kernel: [4487891.048371] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 Apr 18 16:53:17 Server kernel: [4487891.048378] 00 00 00 00 Apr 18 16:53:17 Server kernel: [4487891.048382] sd 3:0:0:0: [sdc] Add. Sense: No additional sense information Apr 18 16:53:17 Server kernel: [4487891.048385] sd 3:0:0:0: [sdc] CDB: Write(10): 2a 00 e8 e0 88 00 00 00 08 00 Apr 18 16:53:17 Server kernel: [4487891.048393] end_request: I/O error, dev sdc, sector 3907028992 Apr 18 16:53:17 Server kernel: [4487891.048420] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048440] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048458] end_request: I/O error, dev sdc, sector 3907028992 Apr 18 16:53:17 Server kernel: [4487891.048477] md: super_written gets error=-5, uptodate=0 Apr 18 16:53:17 Server kernel: [4487891.048482] raid5: Disk failure on sdc, disabling device. Apr 18 16:53:17 Server kernel: [4487891.048483] raid5: Operation continuing on 3 devices. Apr 18 16:53:17 Server kernel: [4487891.048525] ata4: EH complete Apr 18 16:53:17 Server kernel: [4487891.048554] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048576] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048596] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048615] sd 3:0:0:0: [sdc] READ CAPACITY(16) failed Apr 18 16:53:17 Server kernel: [4487891.048617] sd 3:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Apr 18 16:53:17 Server kernel: [4487891.048620] sd 3:0:0:0: [sdc] Sense not available. Apr 18 16:53:17 Server kernel: [4487891.048624] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048643] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048663] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048681] sd 3:0:0:0: [sdc] READ CAPACITY failed Apr 18 16:53:17 Server kernel: [4487891.048683] sd 3:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Apr 18 16:53:17 Server kernel: [4487891.048685] sd 3:0:0:0: [sdc] Sense not available. Apr 18 16:53:17 Server kernel: [4487891.048689] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048709] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048800] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048860] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.049028] sd 3:0:0:0: [sdc] Asking for cache data failed Apr 18 16:53:17 Server kernel: [4487891.049048] sd 3:0:0:0: [sdc] Assuming drive cache: write through Apr 18 16:53:17 Server kernel: [4487891.049071] sdc: detected capacity change from 2000398934016 to 0 Apr 18 16:53:17 Server kernel: [4487891.049080] ata4.00: detaching (SCSI 3:0:0:0) Apr 18 16:53:18 Server kernel: [4487891.061149] sd 3:0:0:0: [sdc] Stopping disk Apr 18 16:53:18 Server kernel: [4487891.485492] RAID5 conf printout: Apr 18 16:53:18 Server kernel: [4487891.485496] --- rd:4 wd:3 Apr 18 16:53:18 Server kernel: [4487891.485500] disk 0, o:1, dev:sdb Apr 18 16:53:18 Server kernel: [4487891.485502] disk 1, o:0, dev:sdc Apr 18 16:53:18 Server kernel: [4487891.485504] disk 2, o:1, dev:sdd Apr 18 16:53:18 Server kernel: [4487891.485506] disk 3, o:1, dev:sde Apr 18 16:53:18 Server kernel: [4487891.497014] RAID5 conf printout: Apr 18 16:53:18 Server kernel: [4487891.497016] --- rd:4 wd:3 Apr 18 16:53:18 Server kernel: [4487891.497018] disk 0, o:1, dev:sdb Apr 18 16:53:18 Server kernel: [4487891.497019] disk 2, o:1, dev:sdd Apr 18 16:53:18 Server kernel: [4487891.497021] disk 3, o:1, dev:sde Apr 18 16:53:18 Server kernel: [4487891.838719] scsi 3:0:0:0: Direct-Access ATA WDC WD20EARS-00S 80.0 PQ: 0 ANSI: 5 Apr 18 16:53:18 Server kernel: [4487891.838886] sd 3:0:0:0: Attached scsi generic sg3 type 0 Apr 18 16:53:18 Server kernel: [4487891.838911] sd 3:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) Apr 18 16:53:18 Server kernel: [4487891.838964] sd 3:0:0:0: [sdf] Write Protect is off Apr 18 16:53:18 Server kernel: [4487891.838967] sd 3:0:0:0: [sdf] Mode Sense: 00 3a 00 00 Apr 18 16:53:18 Server kernel: [4487891.838988] sd 3:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Apr 18 16:53:20 Server kernel: [4487891.839147] sdf: unknown partition table Apr 18 16:53:20 Server kernel: [4487893.130026] sd 3:0:0:0: [sdf] Attached SCSI disk Right now, i'm unable to do anything on /dev/sdc. Is there any way to try to re-attach it? I don't want to power-down the server unless absolutely necessary System: Debian Stable 2.6.32-5-amd64 mdadm version 3.1.4-1+8efb9d1 cat /proc/mdstat Personalities : [raid6] [raid5] [raid4] md0 : active raid5 sdb[0] sdc[4](F) sde[3] sdd[2] 5860543488 blocks level 5, 64k chunk, algorithm 2 [4/3] [U_UU] unused devices: <none> mdadm --examine --scan ARRAY /dev/md0 UUID=1a7744b5:912ec7af:f82a9565:e3b453b4

    Read the article

  • Social Network Updates: While You Were Busy Marketing 2

    - by Mike Stiles
    Since social moves at the speed of data, it’s already time for another update, as we did back in April, on the changes the various social networks have made or gone through while you were busy marketing. Facebook There’s a lot of talk Facebook’s developing a mobile product to act like Flipboard and surface news, from both users and media outlets. The biggest news was Facebook/Instagram’s introduction of 15-second videos, enhanced with with filters, to take some of Vine’s candy. You can also delete parts of videos and rerecord them, and there’s image stabilization. Facebook’s ad revenue is coming along just fine, thank you very much. 35% quarter-to-quarter growth in Q2. And it looks like new formats like Mobile App Install Ads and Unpublished Page Posts are adding to the mix. If you don’t already, you’ll soon see a little camera in comment boxes letting you insert photos right into the comments you make. The drive toward “more visual” continues. The other big news is Facebook’s adoption of our Twitter friend, the hashtag. Adding # sets apart the post topic so it can be easily found or discovered. It’s also being added to Google Plus, Tumblr, and Pinterest. Twitter Want to send someone a promoted tweet when they’re in range of your store? That could be happening by the end of this year. Some users have been seeing automatic in-stream previews of images on Twitter.com. Right now it’s images in your own tweets, but we can assume all tweets are next. Get your followers organized! Twitter raised the limit on the number of lists you can create from 20 to 1,000. They also raised the number of accounts you can have in a list from 500 to 5,000. Twitter started notifying you when someone favorites a tweet you’re mentioned in or re-tweets a tweet you re-tweeted. Anyway, it’s the first time Twitter’s notified you about indirect interactions like that. Who’s afraid of Instagram? A study shows 6-second Vine videos are being posted to Twitter at the rate of 9/second, up from 5/second 2 months ago. Vine has over 13 million users and branded Vines are 4x more likely to be shared than video ads. Google Plus Now featuring a 3-column redesigned stream, and images that take up a whole column. And photo filters Auto Highlight and Auto Awesome work to turn your photos into a real show. Google Hangouts is the workhorse for all Google messaging now, it’s not just an online chat with 9 people anymore. Google Plus Dashboard improves the connection between your company’s Google Plus business page and your Google Plus Local. Updates go out across all Google properties and you can do your managing from the dashboard. With Google Plus’ authorship system, you can build “Author Rank” based on what you write and put on the web. If your stuff is +1’ed and shared a lot, you’re the real deal and there are search result benefits. LinkedIn "Who's Viewed Your Updates" shows you what you’ve shared recently, who saw it and what they did about it in real-time. “Influencers” is, well, influential. Traffic to all LI news products has gone up 8x since it was introduced. LinkedIn is quickly figuring out how to get users to stick around awhile. You and your brand can post images and documents in status updates now. In fact, that whole “document posting” thing is making some analysts wonder if LinkedIn will drift on over to the Dropboxes and YouSendIts of the world. C’mon, admit it. Your favorite part of LinkedIn is being able to see who’s viewed your profile. Now you’ve got even more info and can see what/who you have in common. Premium users get even deeper insights about how people are finding them. If you’re a big fan of security, you’ll love that LinkedIn started offering two-factor authentication (2FA). It’s optional, but step 2 is a one-time code texted to your registered mobile. Pinterest A study showed pins have a looong shelf life compared to other social net posts. “Clicks kept coming for 30 days and beyond.” Most pins are timeless, and the infinite scroll causes people to see older pins. Is it a keeper? Pinterest jumped 82% to 54 million users in the past year. It’s valued at $2.5 billion and is one of the biggest sources of referral traffic there is. That said, CEO Ben Silbermann adds, "Right now, we don't make money." A new search feature stops you from having to endlessly scroll through your own pins looking for that waterfall picture you posted. Simply select “just my pins” in the search bar. New "Rich Pins" lets brands add info like price and availability to pins that can be updated daily via a data feed from your merchant site. Not so fast, you have to apply to Pinterest for it first. Like other social nets, Pinterest does not allow sexual content, nudity, or even partial nudity. However…some art contains nudity, and Pinterest wants to allow art. What constitutes “art” will be judged by…what we have to assume are Pinterest employees who love their job. @mikestilesPhoto: stock.xchng, Tim Marmon

    Read the article

  • SQLAuthority News – Community Tech Days – A SQL Legends in Ahmedabad – December 11, 2010

    - by pinaldave
    Ahmedabad is going to be fortunate city again on December 11. We are going to have SQL Server Legends present at the prestigious event of Community Tech Days in Ahmedabad. The venue details are as following: H K Hall, H K College Campus, Near Handloom House, Opp. Natraj Cinema, Ashram Road, Ahmedabad – 380009 Click here to Registration for the event. Agenda of the event is as following. 10:15am – 10:30am     Welcome – Pinal Dave 10:30am – 11:15am     SQL Tips and Tricks for .NET Developers by Jacob Sebastian 11:15am – 11:30am     Tea Break 11:30am – 12:15pm     Best Database Practice for SharePoint Server by Pinal Dave 12:15pm – 01:00pm     Self Service Business Intelligence by Rushabh Mehta 01:00pm – 02:00pm     Lunch 02:00pm – 02:45pm     Managing your future, Managing your time by Vinod Kumar 02:45pm – 03:30pm     Windows Azure News and Introducing Storage Services by Mahesh Devjibhai Dhola 03:30pm – 03:45pm     Tea Break 03:45pm – 04:30pm     Improve Silverlight application with Threads and MEF by Prabhjot Singh Bakshi 04:30pm – 04:45pm     Thank you – Mahesh Devjibhai Dhola Ahmedabad considers itself extremely fortunate when there are SQL Legends presenting on various subjects in front of community. Here is brief introduction about them in my own words. (Their names are in order of the agenda). 1) Jacob Sebastian (SQL Server MVP) – This person needs no introduction. Every developer and programmer in Ahmedabad and India knows him. He is the one man who is founder of various community-related ideas like SQL Challenges, SQL Quiz and BeyondRelational. He works with me on all the community-related activities; we are extremely good friends. 2) Rushabh Mehta (SQL Server MVP) – If you use SQL Server – you know this man. He is the President of SQL Server of Professional Association (PASS) and one of the leading Business Intelligence (BI) Experts renowned in the world. He has blessed Ahmedabad once before and now doing once again this year. 3) Vinod Kumar (Microsoft Evangelist – SQL Server & BI) – Ahmedabad remembers him very well. During his last visit to Ahmedabad, a fight had almost broke outside the hall amidst the rush to listen him. There were more people standing and listening to him than those who were seated. This is one man Ahmedabad will never forget. 4) and Myself. I will not rate myself in the league of abovementioned experts, but I must say that I am fortunate to have friends like those above. We also have two strong .NET presenters – Mahesh and Prabhjot. During this event, there will be plenty of giveaways, lots of fun, demos and pure technical talk, specifically no marketing and promotion – just pure technical talk. The most interesting part is that all the SQL Legends – Jacob, Rushabh and Vinod are for sure presenting on SQL Server but with a twist. Jacob – He is going to talk about .NET and SQL – Optimization Techniques Rushabh – He is going to talk about SQL and BI – Self Service BI Vinod – He is going to talk about professional development of developers – Managing Time Pinal – Best Practices for SharePoint Database Administrators – SharePoint DBA – I have presented this session earlier. I promise this event is going to be one of the best events held ever. You can read about the earlier event over here. ?Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, MVP, Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology

    Read the article

  • SharePoint Saturday Michigan 2010 Recap, Slides, and Photos

    - by Brian Jackett
    This past weekend I attended SharePoint Saturday Michigan (SPSMI) in Ann Arbor, Michigan.  For those unfamiliar, SharePoint Saturday is a community driven event where various speakers gather to present at a FREE conference on all topics related to SharePoint.  This made my third SharePoint Saturday attended and second I’ve spoken at.  I believe today it was announced that about 210 people total attended the event.  I was very happy with the turnout, especially the ratio of male to female attendees.  Typically with computer related conferences the ratio leans towards more males attending, but both Peter Serzo (one of conference organizers) and I both commented to each other that at the end of the day it appeared to be close to 40% women in the crowd.  So here’s my recap of the weekend. Arrival     Friday afternoon I drove up from Columbus, OH to Ann Arbor, MI and arrived around 4pm.  I was attempting to avoid the rush hour traffic and construction backups.  Turned out to be a good idea because other speakers coming up Friday got stuck on a highway which literally closed down in both directions due to a bad accident.  I was talking my friend Sean McDonough through the highway closing and this was the first time I had seen a solid black traffic line on Google Maps.  Most of us are familiar with Green, Yellow, and Red, but this line was black if that tells you how bad it got. Speaker “Dinner”     Fast forward a few hours and it was time for the speaker “dinner.”  I put “dinner” in quotes because with this night alone SPSMI set a new bar for nicest and most extravagant speaker appreciation events for SharePoint Saturday.  By tapping into some very influential contacts, the conference organizers were able to provide a truck limo (yep you heard right) with refreshments, access to an underground suite at the Palace of Auburn Hills, and courtside tickets to see the Detroit Pistons play that night.  Being a Michigan native I have to say that I was absolutely floored by this experience and very thankful to our conference organizers Peter, Sebastian, and Jesse along with Trillium Teamologies. Sessions     The actual conference started Saturday morning at 9am with the keynote by Rob Collie who is the Microsoft program manager for PowerPivot.  The day continued and I attended the following sessions: Mike Watson (@mikewat) – “SharePoint 2010 Fight Night: Devs vs. Admins” Karl Swedeberg (@kswedberg) – “A Walk on the Client Side with jQuery“ [my session] Brian Jackett (@briantjackett) - “Real World Deployment of SharePoint 2007 Solutions” Jeff Willinger (@jwillie) - “Social Computing and Collaboration Inside and Outside the 4 Walls” Paul Schaeflein (@paulschaeflein) – “PowerShell for the SharePoint Developer” My Presentation     I had a great time presenting my session on Deploying SharePoint 2007 Solutions, but it wasn’t without its fair share of technical issues.  As my session was right after lunch I came in to my room 10 mins early to set up my laptop, slides, and demos.  As a quick background note, a few months ago I got an upgraded laptop from my company Sogeti and have been dual booting it between XP (factory installed) and Windows Server 2008 R2 w/ Hyper-V.  As such I had prepared all of my demo virtual machines to run under Hyper-V.  About 3 minutes before my session was scheduled to start though it became apparent that I did not have the correct display drivers to connect Windows Server 2008 R2 to the projector…     As you can imagine this was a slight cause for concern as I was potentially going to be unable to give my presentation.  Luckily for me I usually prepare for such unforeseen issues and had my presentation and some spare VMs that would run on XP on my external hard drive.  Knowing this I rebooted my machine into XP and began my presentation without slides until about 5 mins into the session when everything was up and running on XP.  Despite this being the first time I gave this presentation I have to say it was one of my favorites I’ve given so far.  The audience was very engaged in the session and I received some great, positive feedback afterwards.  Thanks to all who attended my session, I appreciate it very much. Link to Presentation Files     For those of you who attended my session and would like my slides or demo PowerShell scripts they can be found on my SkyDrive at the link below.  Also, if you have a few minutes and wouldn’t mind rating my session I have this session posted on SpeakerRate.  As speakers we always appreciate any and all feedback attendees offer, so thank you if you are able to provide any. SkyDrive folder with session files Rate my SharePoint 2007 Solutions session   Picture Albums     For everyone else, here are my pictures from the weekend.  The first link is to my FaceBook album which will have tagging (recommend this one.)  The second is to my Live album if you care for higher resolution images. http://www.facebook.com/album.php?aid=2154482&id=21905041&l=a3fb72ee8c View Full Album Conclusion     A big thank you goes out to all of the organizers, speakers, sponsors, and attendees of SPSMI.  As I’ve said so many times, without each and every one of you these events wouldn’t be possible.  I thoroughly enjoyed this trip back to my home state and presenting a new session.  For those interested in my upcoming schedule I will be giving two sessions on PowerShell at SharePoint Saturday Charlotte in April, helping plan Stir Trek: Iron Man Edition in May, and I’m submitting sessions to Day of .Net Ann Arbor in May as well.  Beyond that I haven’t planned out any travels.  Thanks for reading my recap.  Look forward to more technical posts now that I have a short break in conferences.         -Frog Out   links: Michigan image

    Read the article

< Previous Page | 98 99 100 101 102 103 104 105 106 107 108 109  | Next Page >