Search Results

Search found 11051 results on 443 pages for 'removable drive'.

Page 102/443 | < Previous Page | 98 99 100 101 102 103 104 105 106 107 108 109  | Next Page >

• New power supply and now HDDs are not recognized.

  - by Michael

  So I upgraded to a new X4 ULTRA power supply that was recommended to me by a local TigerDirect store. After installing it along with a new liquid cooling system, I booted it up and it automatically fried my CD Drive. After that I noticed that the OS wouldn't start and figured out that none of the 4 HDDs in my computer were being recognized by the BIOS. I feel them spool at a steady pace and have tried new cables and connections but to no avail. I triple checked all of the connections and cables and have no idea what is wrong. This isn't the first time I changed a PS or CPU cooling system but I am at a dead end. Any ideas, aside from buying a USB HDD reader and seeing if they are all fried? Also, this is a stock Gateway mobo with the mobo USB connections already dead. Could the new PS have fried the SATA connections??

  Read the article

• Recover Time Machine partition that turned MBR only instead of GUID

  - by alex

  I have one drive that has a NTFS partition, a TimeMachine partition (I guess HFS+) and empty space. The other day, I did one partition more from Windows 8 (bootcamp) and since then, I can't see the TimeMachine one from OSX, I can see it from Windows though. The problem is that TimeMachine uses a file system that Windows cannot browse, only shows some folders and I need to recover this partition because I have to use it to backup my Mac. On OSX I can only see the NTFS partition and the other one appears unmounted and it's impossible to mount. I've come to the conclusion that something has happened to the partition table. With TestDisk it shows that it's MBR only when I think it should be GUID: And pressing p shows that it's FDisk_partition_scheme and the TimeMachine one appears as Windows_NTFS. I found this thread that is similar to what it's happening to me: Adding NTFS partition to disk in Windows makes HFS+ partition on same disk invisible in Mac OS X

  Read the article

• Can't play blu ray on sony vaio fz

  - by user19455

  Hi. I have a Sony Vaio FZ (VGN-FZ31M) with a blu ray drive. I have just recently purchased the 2001 Space Odissey in blu ray but haven't been able to play on my laptop. When I try to play it with WMP i get this: "Windows Media Player cannot play the DVD. The disc was created in a manner that the Player does not support." and this with VLC: "VLC cannot open MRL. Check log for details." I have once formatted the pc and done a clean install without the sony vaio recovery cd. Is it possible that it is necessary a specific blu ray driver that I have not installed? Thanks.

  Read the article

• Worth it to move /var to physical disk vs logical?

  - by Tammer Ibrahim

  Brief question about partition layout. I use an SSD for /, /boot, /usr, & /home partitions. I'd like to move /var to a mechanical disk to minimize writes to the SSD. I'm mainly concerned about maximizing drive life rather than maximizing performance (although I obviously wouldn't want to cripple my server). My mechanical disks consist of two drives sharing LVM, and a third used for nightly rsync backups. I also have a bunch of old 2.5in hard disks lying around. My question is, should I simply create a new LVM volume '/var' on my primary data store, or would it be worth the increased energy consumption (in terms of maximizing the lifetime of the LVMed drives) to install a low volume 2.5in disk to use just for /var? On a more general level my question is about the trade offs of placing OS mounts on the same physical volumes as my data. Thanks for any help!

  Read the article

• Camera Canon pal DC95 not being able to get cd contents

  - by antoniocs

  Hey! A friend of mine recorded a family event with his Canon pal DC95. This camera records to a mini cd. I saw the cd being played in the camera (which was hooked up to a tv) but when I place the cd's in my pcs cd player I see nothing. Like if the cd had nothing on it. I tried downloading the manual of the camera (maybe I have to do something to the cd) but I can't find it online. I really want to get the videos on the cd so I can pass them to some other friends. Anyone know how I can achieve this? Please help me out :) Thanks. PS: Just a reminder. I know that the cd's contain stuff, but when I place the cd in the drive I just see a blank cd.

  Read the article

• 4K sectors: Why are hard drives moving to 4096 byte sectors, vs. 512 byte sectors? Are 4K sectors a

  - by Chris W. Rea

  I've noticed that some Western Digital hard drives are now sporting 4K sectors, that is, the sectors are larger: 4096 bytes vs. the actual de facto standard of 512 bytes. So: What's the big deal with 4K sectors? Is it marketing hype, or a real advantage? Why should somebody building a new PC care, or not, about 4K sectors? Why is this transition taking place now? Why didn't it happen sooner? Are there things to look out for when buying a 4K sector hard drive? e.g. incompatibility? Anything else we should know about 4K sectors?

  Read the article

• "Windows was unable to complete the format" - Can't format flashdrive!!!

  - by Jake

  I have a 8GB Sandisk Cruzer USB flash drive that I had ruined a while back trying to make it bootable. Anyway now when I click on it I get a message that it needs to be reformatted to be used. So when I try to do that, the formatting starts and suddenly ends with the message "Windows was unable to complete the format". This happens no matter which file system I choose (NTFS, FAT32, exFat) and also which computer I try this on. I am now on a Windows 7 32 bit OS and before tries it on a Vista Home Basic machine. Anyone know any way around this issue? Many thanks.

  Read the article

• Are there any data remanence issues with flash storage devices?

  - by matt

  I am under the impression that, unlike magnetic storage, once data has been deleted from a flash drive it is gone for good but I'm looking to confirm this. This is actually relating to my smart phone, not my computer, but I figured it would be the same for any flash type memory. Basically, I have done a "Factory Reset" on the phone, which wipes the Flash ROM clean but I'm wondering is it really clean or is the next person that has my phone, if they are savvy enough going to be able to get all my passwords and what not? And yes, I am wearing my tinfoil hat so the CIA satellites can't read my thoughts, so I'm covered there.

  Read the article

• How to use Client for NFS on Windows Vista?

  - by netvope

  I've installed "Client for NFS" on my 32-bit Windows Vista Ultimate. However, I can't find it in the start menu, and can't find any documentation on how to use it. How do I connect to a NFS share using "Client for NFS"? Can I map it to a drive letter? How do I choose connection options, such as my uid/gid, mount as read-only, port number, etc? Ideally I would like to map a NFS share using the command line. You may also suggest alternatives to "Client for NFS".

  Read the article

• fsck: FILE SYSTEM WAS MODIFIED after each check with -c, why?

  - by Chris

  Hi I use a script to partition and format CF cards (connected with a USB card writer) in an automated way. After the main process I check the card again with fsck. To check bad blocks I also tried the '-c' switch, but I always get a return value != 0 and the message "FILE SYSTEM WAS MODIFIED" (see below). I get the same result when checking the very same drive several times... Does anyone know why a) the file system is modified at all and b) why this seems to happen every time I check and not only in case of an error (like bad blocks)? Here's the output: linux-box# fsck.ext3 -c /dev/sdx1 e2fsck 1.40.2 (12-Jul-2007) Checking for bad blocks (read-only test): done Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information Volume (/dev/sdx1): ***** FILE SYSTEM WAS MODIFIED ***** Volume (/dev/sdx1): 5132/245760 files (1.2% non-contiguous), 178910/1959896 blocks Thanks, Chris

  Read the article

• renaming hard drives (sdc to sdb) on the fly

  - by w00t

  ata2: link is slow to respond, please be patient (ready=0) kernel: [2761026.198796] ata2: soft resetting link kernel: [2761031.226669] ata2.00: disabled kernel: [2761031.226720] ata2: EH complete kernel: [2761031.226753] sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK After receiving the error above, I couldn't access /dev/sdb anymore. Not wanting to restart the server, I rescanned for the device using echo "- - -" > /sys/class/scsi_host/host1/scan and it readded the drive as /dev/sdc. From what I have found, I need to use echo "scsi add-single-device 0 0 3 0" > /proc/scsi/scsi, "3" being the SCSI ID which corresponds to sdb. Everything nice up to the point I execute the command and get -bash: echo: write error: Invalid argument. All the solutions point to using this method, but I am unable to. Any other method available? Debian 5.0.8 - 2.6.26-1-686

  Read the article

• Can't access a partion that has a virus on it

  - by vaccano

  My wife's computer had a virus alarm go off, so I am looking into it. The virus is supposed to be on the D: drive. I wanted to talk a quick look at the file, but I cannot not. It has one file that I can get to. It is D:\Recovery. That shows a "Protected by PC Angel" graphic. How can I get past this? Should I do it? Is the virus scanner wrong? (I am using Avast).

  Read the article

• Partition error being reported by only some programs

  - by Mahmoud20070

  I am getting an error about the partitions on one of my drives. I checked my hard disk with Acronis Disk Director 11 Home, HDTunePro, MiniTool Partition Wizard, Hddscan, HDD Regenerator 2011, WD Data Lifeguard Diagnostics, GParted, and Parted Magic, but none of them found any problems with the drive. However, when I perform a check with PartitionGuru, DiskGenius, and an old version of Partition Magic (8.0), I get the following error (seen below) about the partition being bad and needing to reformat to fix it: Error - The number of sectors record in DBR overflow - Reformat Should I reforamt or not? I checked two other hard drives, one of them like my 500 WD Blue, and neither has any errors with any progras. Are there any other programs that can check partitions for errors? Finally, how should a large SATA hard disk be formatted? I currently use programs like GParted, Acronis Disk Director, or MiniTool Partition Wizard. Are these programs good for formatting a new hard disk? Could the choice of format tool be the cause of the error?

  Read the article

• How to hide a partition?

  - by snark

  I bought a small 32 GB SSD to store the operating system (Windows 7) and my applications. I'll copy the existing boot partition (30 GB) from my harddisk (WD Velociraptor) to the SSD using GParted but I'd like to keep the existing partition intact (keeping all data on it) so I can go back to it if there is a problem with the SSD. How can I hide the partition so it is not visible anymore to Windows? What should I change with GParted? Second question: how can I keep the harddisk partition synced with the SSD so I have a backup? I'm looking for a near real-time solution (not something like Acronis Drive Image).

  Read the article

• Decreasing Root Disk Size of an "EBS Boot" AMI on EC2

  - by darkAsPitch

  So I have followed Eric's wonderful article here: http://alestic.com/2009/12/ec2-ebs-boot-resize This was the code basically that helped me increase the default size of the AMI: ec2-run-sintances ami-ID -n 1 --key keypair.pem --block-device-mapping "/dev/sda1=:250" Running Ubuntu 11.10 I didn't even have to re-size the disk afterwards, it was immediately a 250GB drive. How do I go about decreasing the default size of the AMI??? I tried: ec2-run-sintances ami-ID -n 1 --key keypair.pem --block-device-mapping "/dev/sda1=:100" Obviously... but I was told: Client.InvalidBlockDeviceMapping: Volume of size 100GB is smaller than snapshot ####### <250

  Read the article

• How can I increase the size of a Windows 2003 NTFS partition?

  - by waszkiewicz

  Hi everybody! I have a very important server running Windows Server 2003 and my System partition is becoming too small, it's slowing down the machine. I have already tried all the cleaning stuff and transferring some "unimportant softs" on the "Saves" partition but it didn't help much at all. Is there a way to re-partition my hard-drive that will work on a 2003 Server, that's not too expensive and that could be used without turning the machine off. If there is no other way, then I'll have to reinstall the OS, but it will have to wait for the weekend. Thanks for your suggestions.

  Read the article

• Partition table correpted in windows 7 machine as simple dynamic partition

  - by raki

  I have Windows 7 installed in my system. When I originally partitioned it I made 3 partitions and 16 gb space as unallocated. Later I tried to create a partition using this free space using diskmanagement tool. It shows free space as unusabe space and the only one option available is to make it as a simple partition. Unfortunately I made it as simple partition and all my partitions converted to simple dynamic partition. Now after reboot the OS is not loading. I tried to reinstall the OS by formatting the C drive, but it doesn't work. Now I can't load the OS properly. How can I install Windows 7 on my system without losing my data on the other two drives?

  Read the article

• Use Windows Briefcase from the command line

  - by Daniel

  I have a thumb drive on which I take many of my files with me. I would like to synchronize it with my computer automatically when I connect it. I currently have a script run every time I connect it so that I can do the many things that need to be done when it connects (check for updates to the portable applications, etc.). I want my synchronization utility to: Detect conflicts work correctly when I move files or change the folder structure tell the difference between a file that was deleted on one side and a file that was added on the other work from the command line or at least have a command that will open up a window provide a confirmation screen before doing anything The Windows Briefcase does all of these except the command line. Is there any program that does all of these, or is there a way to synchronize the briefcase from the command line?

  Read the article

• diagnose "corrupt file" problems

  - by Matthew

  My computer has been crashing the last couple weeks pretty regularly (at least once a day). A lot of times things I do will display a little notification in the bottom right saying something about a corrupt file. (I'm on Windows XP Pro Service Pack 3). When the computer does crash I get the "blue screen of death" usually. Some of the notifications also advise running the chkdsk utility. I cannot get it to successfully run. Using the command prompt (or even the "tools" menu after right clicking the drive and choosing properties), it will not run the utility (it says "do you want to schedule it to run next boot time" or whatever, which I confirm). The problem is that most of the time after restarting, it doesn't run at all. The few times it does run, it has an error (I can't remember the error right now, it at least says it's ntfs and such) and says disk checking will end. How can I get it to successfully run?

  Read the article

• What does this WinImage Error Mean?

  - by Kryten

  Hi, I am using WinImage (version 8.0) on Windows XP SP3 to create a VHD File from my Hard Drive, however, everytime I try to, everytime it says: "I/O error in reading data on position 000000007cd40000:00010000. Error 23: Data Error (cyclic redundancy check)." with the options "Abort", "Retry", "Skip" & "Skip All". Everytime I try "Retry" the message comes, if I click skip another message comes up (same as above, except the data position). I have run "CHKDSK /F /R" several times, but the error always appears. What is wrong? Can I safely skip the Errors? Is there anything I can do to fix the error?

  Read the article

• USB-Sticks and multiple Partitions

  - by Bobby

  Hello. I've got an USB-Stick with multiple Partitions on it (FAT32 (active), FAT32, Ext2 <-- that's another story) and it seems like that my Windows XP can only mount the first partition of the stick. If I try to mount the second one using the volume manager it tells me that I need to make it active and reboot...is it really that limited or am I just missing something here? Partitions: FAT32, System Rescue CD, bootable and active FAT32, some tools ext2, some data (I know that I need extra drivers etc., but that's not asked here. Edit (Solution): Thanks to the answer with the RMB (ReMoveable Bit) I was able to dig up a solution described at this site (Section: On flash drive only the first partition works). Basically, there's an Hitachi Driver available which filters the RMB on Driver-Level, which just needs to be a little modified to function with basically every USB-Stick. All you need to do is adding the "Device Instance ID" to the driver and then use this driver.

  Read the article

• Create netbook recovery image without DVD burner (virtual burner?)

  - by Dan

  I have a new Acer Aspire One which is asking to create a recovery DVD. It doesn't have a built in burner, and I don't have a USB burner. However I do have a large USB hard drive. Is there some way to get the recovery software to "burn" an image file instead of a real DVD? I know you can download a Linux recovery image, but the netbook comes with XP. I plan to install Linux on it but I'd like an XP recovery image just in case.

  Read the article

• Beeping Hard Disk - Seagate 250GB Momentus 5400.6

  - by Pez Cuckow

  I have been trying to repair a laptop that simply beeps instead of booting. After taking it apart I have now realised that it is the hard disk beeping. I know that sound strange but I guarantee that is what it is! (Currently powered on it's own with a Sata Mains lead). The beeping is slightly faster than one per second there is a link to a recording below: http://www.pezcuckow.com/files/BeepingHardDisk.m4a This recording was made resting the mic on the hard disk while it was sat on a table on it's own, there are no speakers anywhere near, the sound is coming from the hard disk. Does anyone know what this beep means? Is the hard drive just dead, or is it fixable and the data recoverable? Many thanks,

  Read the article

• What type of SATA cable will I buy?

  - by Mehper C. Palavuzlar

  I've bought a new optical drive. It's a Samsung SH-S223C with SATA connection. Since it is OEM with no box, no cable came with it, so I need two cables now. Since I have an extra SATA power cable, it's OK, but I have to buy the data cable. What type of cable should I buy? If you please give a picture of it besides its type as well, I'll be happy. My motherboard is GigaByte P43-ES3G. TIA.

  Read the article

• Partition table correpted in windows 7 machine as simple dynamic partition

  - by raki

  I have Windows 7 installed in my system. When I originally partitioned it I made 3 partitions and 16 gb space as unallocated. Later I tried to create a partition using this free space using diskmanagement tool. It shows free space as unusabe space and the only one option available is to make it as a simple partition. Unfortunately I made it as simple partition and all my partitions converted to simple dynamic partition. Now after reboot the OS is not loading. I tried to reinstall the OS by formatting the C drive, but it doesn't work. Now I can't load the OS properly. How can I install Windows 7 on my system without losing my data on the other two drives?

  Read the article

< Previous Page | 98 99 100 101 102 103 104 105 106 107 108 109  | Next Page >