Search Results

Search found 4585 results on 184 pages for 'signal analysis'.

Page 102/184 | < Previous Page | 98 99 100 101 102 103 104 105 106 107 108 109  | Next Page >

• Ubuntu 10.4 No internet

  - by Keeper780

  I have Ubuntu 10.4 dual booted with Windows Vista on a work Lenovo R61 laptop. The home and work wireless connection were working fine. I lost all internet connection at work. The IT guy clearly knew nothing about Linux. Since he 'fixed' it get nothing, no wlan signal the Network manager icon was gone, no internet. I still have the live disc and if I run from the live disc the connections are there and everything works perfectly. How do I restore the internet easily on my laptop. I have been using Linux for 3 Years but I am still a bit of a newbie, this is the first major problem I've had in three years. It's driving me nuts. Thanks

  Read the article

• solr administration

  - by devrick0

  Does anyone have any notes for an sysadmin supporting solr? I'm looking for anything that might be useful for monitoring & metrics as well as troubleshooting. Some useful links I have found are: /solr/admin/stats.jsp and /solr/admin/analysis.jsp In the logs I have noticed, other than the query, "hits", "status" and "QTime" values. The documentation on what these mean is sparse at least based on the 100+ websites I have checked. QTime appears to be the query time response in milliseconds. Hits is some form of results but I'm not sure exactly what makes that up and I'm not sure about status. Typically I see status come back as "0" but I have seen other numbers such as "5", so my thoughts that it could be either HTTP status codes or a 0 or 1 (good or bad) methodology isn't accurate. All of the documentation I have come across is intended for developers. Any sysadmin-centric documentation would be a big help.

  Read the article

• DVI monitor detected only on computer startup

  - by kamil

  I've recently connected a new monitor, LG M2252D-PZ, to a rather outdated computer with Windows XP and Radeon 9600. XP has SP3 installed, video drivers are the latest version back from the times the video card was still supported. My problem is that the monitor works fine only as long as I don't turn it off or switch it to a different input. When I turn it back on, it says "no signal". The key to the problem must be the DVI port, to which the new monitor is connected. The previous monitor was connected to the VGA output, and I've tested that the new one also works fine when connected to the analogue port. Apparently, the computer tests for the presence of a monitor on the DVI port only on startup. The question is, how do I change this?

  Read the article

• Any way to tell apart a CPU defect from a mainboard defect?

  - by Pekka

  I have a fairly modern desktop computer, an AMD Athlon II X2 based silent PC, that does not work. When turned on, it will start physically (all fans are rotating, disks start up...) but not give a signal on any of the graphics ports (DVI, VGA, and HDMI, I tried all three). Also, the reset button does not seem to have any effect. I have stripped the mainboard bare of all SATA connections, extension cards, and the one 2GB RAM chip to eliminate them as the problem source, but to no avail, so I think it's fair to assume it's either the mainboard or the processor that are at fault. However, I have neither a replacement mainboard, nor a replacement processor handy to identify which one is broken. The cause of the defect is unknown, so for all I know, it could be both. Therefore, I'm reluctant to buy replacement hardware blindly before knowing more. Is there any way to further diagnose (or at least get some indication) which component is broken without buying replacement hardware?

  Read the article

• Use 2 wireless adapters to connect to 2 WIFI networks (local and internet) simultaneously?

  - by Mouad

  On my HP Compaq 6710b there's an internal WIFI network adapter. Attached to the same laptop there's also an external USB Alfa WIFI adapter. I live near campus and can pick it's WIFI signal. The problem is that when I am connected to the Internet Wifi using the internal adapter, and then connect to the home (non-internet) Wifi network's router, I lose the connection to the internet (it stays connected, but there's no actual connection). So how can I use the two adapters to connect to both networks successfully ? The router is Belkin N150 Enhanced Router Model F6D4230-4 V1 The external adapter is: ALFA AWUS 036NHR

  Read the article

• Wi-Fi or Bluetooth to USB converter

  - by yerzhik

  Is there a device, that works without a driver, you just connect it as usb, and receive any signal sent to it as if it were COM Port wired connection? For example, such a device that gets data sent to it by Wi-Fi network or Bluetooth and resends it to the USB. Of course it has to be set up once (network name, password etc) and for this purpose you need a driver, but once it is set up, you can use it at any computer without a driver. I have a Bluetooth USB, but I think it can't work without a driver. By just connecting it to any computer you can't find it in device list on another bluetooth device (as phone, etc).

  Read the article

• Apache: Stealth 404 the admin area until authenticated via basic auth, then allow access

  - by Kzqai

  Given a administrative area with urls like this: wp-admin/ wp-admin/whatever wp-admin/another-page wp-adminsecretlogin/ A standard basic-auth coverage would provide a username and password prompt on all three urls, and return a 403 on all failed auth attempts. This is a pretty obvious signal that something exists there, and thus is an invitation to script/brute force access. I would like to instead, require basic auth everywhere, but when not authenticated, not prompt for username and password, and instead return a 404 not found error for all urls except a wp-adminsecretlogin/ url. At that individual-to-the-site url, basic auth could go through, and unlock the rest of the administrative functionality (though the standard application login would still be necessary). How would I do that via apache .htaccess or .conf directives?

  Read the article

• Not getting my normal internet speed but my other computers can?

  - by Dennis

  I have Comcast Xfinity and I cannot reach anywhere near my promised speed. My family desktop which is hardwired into the router reaches to 60Mbps and so do my parents computers and my brothers. I cannot seem to get anywhere close to it, I know with being wireless I won't reach it, but I should at least get somewhere close. I can only pull 6Mbps and thats terrible for what I should be receiving. Any clue what could be wrong here? Edit: I have 100% signal and I'm not behind any walls

  Read the article

• Kill child process when the parent exits

  - by kolypto

  I'm preparing a script for Docker, which allows only one top-level process, which should receive the signals so we can stop it. Therefore, I'm having a script like this: one application writes to syslog (bash script in this sample), and the other one just prints it. #! /usr/bin/env bash set -eu tail -f /var/log/syslog & exec bash -c 'while true ; do logger aaaaaaaaaaaaaaaaaaa ; sleep 1 ; done' Almost solved: when the top-level process bash gets SIGTERM -- it exists, but tail -f continues to run. How do I instruct tail -f to exit when the parent process exits? E.g. it should also get the signal. Note: Can't use bash traps since exec on the last line replaces the process completely.

  Read the article

• Multiple FIle Upload in FTP Using CMD

  - by user697363

  I've large number of files, over 10,000, which I want to upload in FTP server. Now, I can't zip those files & upload it as I've to read those files individually in SAS software for my analysis. If I use mput commant, then the prompt as me to say "y" eact time it tries to upload the file. This is very cumbersome. Is there any method by which it automatically upload the files without I've to manually entering "y" each time file wants to upload. The command I was using was: ftp ftp.myftp.com *my ftp server name username:myusername password:mypassword ftp> lcd c:\local_folder ftp> mput *.*

  Read the article

• Storage sizing for virtual machines

  - by njo

  I am currently doing research to determine the consolidation ratio my company could expect should we start using a virtualization platform. I find myself continually running into a dead end when researching how to translate observed performance (weeks of perfmon data) to hdd array requirements for a virtualization server. I am familiar with the concept of IOPs, but they seem to be an overly simplistic measurement that fails to take into account cache, write combining, etc. Is there a seminal work on storage array performance analysis that I'm missing? This seems like an area where hearsay and 'black magic' have taken over for cold, hard fact.

  Read the article

• No wireless adapter in msi u200

  - by Mino Marimat

  I have a MSi u200, and the weird thing was that I was using this normally before, then after a few minutes all of a sudden it couldn't find the wifi signal from my house. I did some troubleshooting and a bit of search in the control panel, and it seems like my hardware is missing. :( I can't even turn on the wireless light using Fn+F8, so my suspicions about the missing hardware strengthened. I tried searching for DIY fixes, but I found out that the wireless card is actually built-in deeper, unlike the RAM cards and the hard drive where you can either replace or add more cards. What do I do?? As of the moment, I can get connected to my wifi here at home using a wireless adapter via usb, and it's working. So my guess about the hardware problem seems correct. HELP!!! Thanks!

  Read the article

• Viewsonic monitor keeps showing its on-screen menu incessantly

  - by markvgti

  Since yesterday my Viewsonic 22" monitor (VX2255wmb) keeps showing its on-screen menu incessantly, without my touching any of its buttons. The menu comes on in the centre of the screen, stays on for 8-10 seconds, disappears for a second or two, then repeats the cycle. This happens whenever there's a signal being sent to the monitor. I can't actually navigate the menu when it appears on-screen. Pressing the power button, or the Up and Down buttons on its right edge dismiss the menu, only for it to reappear again. These symptoms have appeared before, but earlier they'd stop after 5-10 mins. The power button on the monitor has always been iffy, but now it doesn't seem to be working at all--have to switch off power supply from mains when I leave my desk. Using DVI input on this monitor as my HP desktop has DVI output.

  Read the article

• Internet Connectivity... Help please!

  - by James

  Hi. My Laptop is having trouble connecting to my wireless router. Other laptops are using the wireless, but it's not reached capacity. The laptop recognises (with a strong signal) that there is wireless internet, and I can connect via the router with a cable because this happens automatically. My problem is this... When I click "connect" (for example in the network and sharing centre), the dialogue box closes and nothing else happens - as though "connect" is being read as "exit". I am running Vista on a Toshiba Satellite Pro P300. Any help would be very much appreciated, Thanks

  Read the article

• Is there an intuitive way to reopen Empathy's contact list?

  - by aef

  Since a short while I'm using Ubuntu Oneiric Ocelot (11.10) with gnome-shell (Gnome 3) and I'm trying to get accustomed to the default Empathy Instant Messaging client. When I hit the close button of Empathy's contact list the window disappears as expected. When I now start Empathy over the Gnome Activities menu the contact list reappears. That's not as easy as clicking a system tray icon back in Psi on Gnome 2 but it works for now. But when I start a conversation first and have an open conversation window, then close the contact list, and try to regain access to it by using Gnome Activities, I only get the conversation window into focus and no contact list appears. I only seem to be able to get the contact list back if I close the conversation window (and thereby signal the conversations to be over) and then use Gnome Activities again to get my contact list back. That's horrible. Is this intended? Is there something I'm missing?

  Read the article

• Why do I have inconsistent network issues with my laptop's wireless?

  - by Jason

  I'm having trouble with my laptop Internet connection. It's patchy at best and resets or freezes a lot. The signal strength is also random. I thought it might be a driver issue but now I don't know. Three other computers using the same wireless network run well. I've switched out wireless routers so I don't think it's the router. I thought it might be the laptop's internal wireless card but I just bought an external USB network card and I'm still having problems. Specs Lenovo T-60p Windows 7 Ultimate Edition Patches/drivers are up to date I only use one of the below at a time, disabling the other: Intel PRO/Wireless 3945ABG v. 13.3.0.137 (Internal wireless) Medialink Wireless-N USB 2.0 Adapter (USB wireless) Any ideas on what might be the problem?

  Read the article

• Monitor someone on server

  - by edo

  Im in the unfortunate position of having to give someone who I do not fully trust privileged access to a webserver to finish work that they never completed. They will access the server remotely (ie I will not be able to see their screen). What can be done to a) proactively limit any potential damage and b) accurately log anything they do on the server for analysis afterwards, even if things seem ok? They will be updating a web application. Thanks in advance! --- More informtion: The server is a Ubuntu AWS server.

  Read the article

• Installing WiFi in a church for internet access

  - by Dave Griffiths

  Hi, a colleague at work asked this question: My local church want to get WiFi enabled in the whole of their offices and main church building. The offices and main building are in the same overall structure and so the signal does not need to travel outside to any other buildings outside this main structure. Where would I start on such a project and what kind of repeaters are needed (and how are they set up) given that some of the walls are pretty thick. Do you still have one ADSL line coming in to router or are there some options of having two lines coming in so that they isn't a single point of failure. Am looking at fibre for the broadband for increased speed. Any starting pointers appreciated.

  Read the article

• TV Card Problem

  - by MladenB

  I have DVB-T card (CE9500B1) and it doesn't work. I've tried everything I knew (but I don't know much). It doesn't show any problem, but shows "No Signal". I used another TV card USB, found channels, put mine card again, and again nothing. I don't think it's broken, when I put USB in my laptop, it recognizes it. Also, these little lights on USB are never turned on. OS is Win 7. Help, please.

  Read the article

• Router Suggestions [closed]

  - by zamN

  Lately I've been having router problems with my Linksys WRT54G when it comes to signal strength. Anyways I am thinking of getting a new router since the linksys is about 5 years old now. I'm just curious what router to get because I want to get the most out of my money. I already have a modem that I will connect to the router. I don't need voIP or any of that. All I simply want is just something that is going to last and will not have any stupid problems.

  Read the article

• Issues with new graphics card and drivers

  - by Ortund

  With my onboard graphics card (Intel HD 4000) I was able to use 1680x1050 screen resolution. Using the same screen and an Asus ENGTS250 graphics card with 296.10 drivers installed, I'm not able to use that resolution anymore. Also, I've been having other trouble with driver installations. Using 340.52 or 337.88, I can't boot into Windows 7. I see the Windows Welcome screen and then the screen goes black, loses signal and the computer locks up. I think the drivers issues and the resolution problems go hand-in-hand. I have a feeling I could use a newer driver than 296.10 which would give me access to use the 1680x1050 resolution I want to use, but I'm terrified that if I update or install another driver, that the computer will lock up again. Can anyone recommend a [better] driver for me to use?

  Read the article

• Using a BTHomeHub as a wireless booster

  - by Ploo

  I currently have a BT HomeHub downstairs but the wireless signal isnt strong enough on the second floor. I have an old BT HomeHub from the previous contract that I wanted to set up upstairs. I currently have an ethernet cable leading up into the old router. I then took my laptop and plugged it into the old router in hopes of configuring it but when I cannot reach api.home which is the address of the router. I cannot connect to the router wirelessly either since the password was changed and I'd have to change it through config. At this point I am completely stumped, any ideas?

  Read the article

• Why won't my computer turn off?

  - by kinglime

  I have recently replaced my old Corsair TX650M PSU with a new CoolerMaster Silent Pro Gold 800w PSU. With the old PSU when I turned off my computer from windows it would shut down and everything would turn off. The lights would turn off and the fans would stop turning. With my new power supply when I shut down windows It shows the usual shutting down dialog then my two monitors say "no signal" and turn off. The weird part however is that the lights stay on and the fans continue spinning forever until I manually hold the power button in for 4 seconds then finally everything shuts off. How can I emulate the previous behavior?

  Read the article

• best tool for searching within unstructured log files [closed]

  - by Alex Holding

  i am supporting a number of bespoke applications at the minute and searching through their very non standard logs is a nightmare, so im looking for a tool which can do the following - load large text files search through multiple files at once and display all results can search with regex can be used to view and search unstructured text files There are some great looking log tools available but they all seem to be focused on structured logs, where the logs i deal with most days are just flat text files. I am currently using notepad++ but that has its own annoyances so im hoping there is a dedicated log analysis tool that i havent found yet.

  Read the article

• Any Microsoft SQL Server 2008 licensing restrictions on usage?

  - by ryrobes

  Does Microsoft have any problems with HOW I USE SQL Server Standard Edition 2008? I plan on using it to aggregate my clients various data sources and report on them (using the whole stack - SSIS, DB, Analysis Services and Reporting Services) via the web. I don't want to run into any issues with being accused of "re-selling" services / features when I'm not allowed to, etc. In essence, I'm charging people to build them solutions based on / using MY licensed copy and then giving them access to the final products. (reports, etc) It seems straightforward enough - but who knows with MS... (BTW, Licensed by processor / not CAL)

  Read the article

< Previous Page | 98 99 100 101 102 103 104 105 106 107 108 109  | Next Page >