Search Results

Search found 9235 results on 370 pages for 'social networking'.

Page 102/370 | < Previous Page | 98 99 100 101 102 103 104 105 106 107 108 109  | Next Page >

• Wireless Access Point - Can't ping other machines on the wireless network

  - by Surfer513

  I have a wireless access point (Netgear), and I have it setup so that it has an IP address in the current subnet (let's say 192.168.2.0, subnet mask of 255.255.255.0). The machine that it is connected to via ethernet cable has an IP in the same subnet as the AP. The machines that are connected to the AP via the wireless connection also have an IP address in the same subnet as the rest of the network (192.168.2.0). All machines can ping the access point, but they cannot ping each other. I don't totally understand why, because there is connection and all of the machines are in the same subnet. I realize this is a layer 3 device, but is there an issue because of this AP's lack of gateway capabilities? (i.e. no routing table, etc.)

  Read the article

• MacBook's Airport not working from menu bar

  - by not22

  All of the sudden my MacBook doesn't connect to my wireless after waking from sleep. My network shows up at full signal strength and it remembers the password correctly, but I get an error message when I try to connect from the menu bar. The only way I can get on the internet is to go through Network Diagnostics and turn it on there. I don't understand why it works every time through Network Diagnostics and never on it's own or through the airport menu bar. Nothing has been changed or installed or reset on my computer that I know of. Restarting doesn't fix it, nor does turning off the airport card. Any ideas?

  Read the article

• route lan traffic through wirless mifi

  - by Randall Blake

  I have a Windows 7 laptop accessing the internet through Verizon wireless MIFI configured as 192.168.1.1. It supports only 5 wireless connections, so I don't want to use up connections unnecessarily. That laptop has an ethernet nic which I have given a static IP of 192.168.0.5. Everything else on the 192.168.0.0 network acquires an address via DHCP from a DLink router whose address is 192.168.0.1. Also on that network are a printer, some network cameras, and a linux pc. The linux pc does not have a wireless card (and I don't want to buy one). The linux pc is located at 192.168.0.122. I can ping the linux pc from the windows pc. But I cannot access the internet from the linux pc. I can ping everything on the 192.168.0.0 network EXCEPT the ethernet card in the Windows PC. It seems as though my DLink router will not route requests to the 192.168.0.5 nic on the windows pc. My windows pc has a default route pointing to the 192.168.1.0 network. It also has a route telling it to route all traffic destined for the 192.168.0.0 network through the 192.168.0.5 interface. I have tried adding a default route to the linux pc to "gateway" 192.168.0.5, but that does not work. I have also tried adding a default route to the linux pc to the gateway 192.168.0.1 (the DLink router) but that will not give me internet access either (over the 192.168.1.0 network). I tried these two different routes at different times - I did not set them both at the same time. I suppose this is a simple problem to solve, but I cannot seem to solve it. How can I give internet access over the 192.168.1.1 MIFI to my linux pc on 192.168.0.122? Thanks EDIT: Additional Info Internet | | MIFI (192.168.1.1) (wireless) | | (192.168.1.3) (wireless) Windows 7 PC Dlink Router (192.168.0.1) ------------ (192.168.0.5) (wired) | | |linux pc (192.168.0.122) (wired) | |printer (192.168.0.100) (wireless) | |network cameras, etc (192.168.0.103) (wireless) Only the windows pc is multi-homed with a wireless nic that connects to the MIFI wirelessly, and an ethernet nic with a wired connection to the DLink router. (The DLink permits both wired and wireless connections.) I don't want to use Windows internet connection sharing because I believe it will set up the ethernet nic as a gateway on 192.168.0.1 and a DHCP server. I already have the Dlink performing that role and I don't want to change that if I do not have to. (The Dlink permits me to make DHCP reservations and I really like that feature. I don't want to lose it.)

  Read the article

• Browsing Playstation 3 from Ubuntu Box

  - by zfranciscus

  Hi, My Goal here is to be able to transfer files from my Ubuntu 10.04 box to my PS3 over a wireless network. My PS3 and my Ubuntu Box is on the same home network. These are some stuff that I tried: I can't see my PS 3 from 'Places ? Network' nor other computer that is running on windows. I am still puzzled by this fact. I have not tried ping-ing my PS3. I'll try that later today and post the result in the forum I install PS3MediaServer (http://code.google.com/p/ps3mediaserver/). Someone in the PS3 chat forum (http://www.ps3chat.com/playstation-3...lp-please.html) claims that it will enable your ubuntu box to browse PS3. So I downloaded PS3MediaServer, and ran the software. The status tab keep showing "Waiting ...". It seems that PS3MediaServer can't find my PS3. Some how I feel that 1 and 2 are related somehow.Perhaps that there is something wrong with my Ubuntu network settings that is preventing my ubuntu box from looking up other device on the network. I can go to the Internet fine, but I can't see other device on my network. Does anyone have any experience in this area. I would like to hear your experience and perhaps some solution. Any kind of hints or help will be greatly appreciated. Cheers

  Read the article

• iMac G5 20" (First All-In-One White Screen) Cannot Connect To Internet

  - by Goober

  The Scenario I've got an iMac G5 20" (First All-In-One White Screen) PPC. It has an Airport Extreme Network card in order to wirelessly to connect to the internet. For the most part I connect using ethernet as opposed to wirelessly, but recently have had the need to connect using the wireless. The Hardware BT Home Broadband Wireless Router. iMac G5 20" From about 5 years ago (First All-In-One White Screen) The Issue Even though I know for a fact that It has connected to the internet wireslessly in the past, for some reason it can discover the wireless router, but upon entering the password it fails to connect. I have tried multiple times to no avail. I have 2 other Mac's on the network and a pc that can all connect wirelessly. However both the mac's. Question Any ideas as to why my really old iMac G5 can't connect wirelessly anymore!?

  Read the article

• Windows XP does not list WPA wireless networks

  - by Tomalak

  What can be the reason that Windows XP does not show WPA-encrypted wireless networks? The laptop I have problems with is an older model (Toshiba Satellite Pro 6100) with Windows XP SP3 on it, fresh install. The wireless network card in it is an Agere product that lists as "Toshiba Wireless LAN Mini PCI Card". The networks showed up perfectly before I first tried to connect to one (it was set to WPA2). The connection failed (the card supports WPA only), then something must have happend and Windows hides these networks now. A manually configured WPA setup via Windows' own wizard works, I'm using it right now. The network just won't show up in the list of available network on its own. I suspect that XP incorrectly set a flag somewhere that this network card does not support WPA. Is there such a flag, and if so, how can I change it back?

  Read the article

• Network bottleneck/throttling issue

  - by Gavin

  Hi all, It's my first day at a new company and i've been given the task to find out an issue with the internet connection. I noticed that whilst I was downloading a large file, the network grinds to a halt, except for my download. At first I thought it was the internet connection/modem but it seems that whilst the lockdown occurs, I am unable to access any network device. Has anyone experienced this before and if so, do you have any pointers? Looking at the setup. They have an DSL modem that connects to a 10/100 switch. There are only 5-6 computers on the network. Cheers Gavin

  Read the article

• Forward all tracif from one IP to another Ip on OS X

  - by Josh

  This is related to this question I just asked... I have two IP address on my iMac I want to "bridge". I'm not sure what the proper terminology is... here's the situation. My iMac has a firewire connection to my laptop and an ethernet connection to the rest of my office. My laptop has an ip of 192.168.100.2 (on the firewire interface). My iMac has an IP of 192.168.100.1 on the firewire interface, and two IPs, 10.1.0.6 and 10.1.0.7, on it's ethernet interface. If I wanted to forward all traffic coming in from 192.168.100.2 on my OS X machine to go out on IP 10.1.0.7, and vice-versa, can this be done? I assume I would use the ipfw command. Essentially I want to "bridge" the firewire network to the ethernet network so my laptop can see all the machines on the 10.1 network, and all those machines can see my laptop at 10.1.0.7. Is this possible?

  Read the article

• How do I see what connections are being made?

  - by Coldblackice

  My DDWRT router is showing that my computer has a connection count around 600! The router is at 100% CPU use. How can I see what's making all the connections? So far, I've opened up Resource Monitor and checked the network tab. I can sort by which program is using the most network bandwidth (Pale Moon browser), but I can't see what's making all of the connections. Or rather, where all the connections are being toward (trying to find what tab must be making all of these connections). I've also tried netstat -A, but it apparently doesn't show the actual number of connections being made. At least, the list of established connections isn't very long, by any means (like enough to account for the 500+ connections apparently being made.

  Read the article

• MacBook can't use internet, but nslookup and ping both work

  - by Joel Coehoorn

  I have a user with a new high-end MacBook Pro that can't use the internet. He can connect to either our wired or wireless network and do things like browse file shares, but can get no further. When I brought the machine in for testing, I found that I could do an nslookup just fine, and I'm able to ping addresses returned by nslookup just fine. I'm even able to bring up web pages by entering the IP address into the address bar directly. However, when I try to ping the domain name rather than the IP address, it just sits there. So apparently I can either do name resolution or communicate with an address, but not both at the same time. Again, these symptoms occur on both the wired and wireless network. Other machines on our network, including a few other Macs, don't have this issue. Any ideas?

  Read the article

• Windows XP Network installation from Linux server ( RHEL 5)

  - by Kumar P

  How can i make network installation ( for install Windows XP ) from Linux ( RHEL 5 Server ) ? There is option in linux server to install client machine with linux by network installation. As same as windows server have option to install client machine with windows operating system. Now i want to know steps for linux server (RHEL5) to install client machine with windows operating system (Windows XP) *sorry for poor english

  Read the article

• Recommend- XORP vs GNU Zebra vs Quagga

  - by Vivek Sharma

  Any recommendations which of XORP, GNU Zebra and Quagga routing software is simple enough to hack and learn?

  Read the article

• Problem Assigning Static IP to CentOS Server

  - by nategood

  We have a sandbox server running CentOS that we run inside our office. Our ISP has assigned us a block of 5 static IPs. We now want to assign it a static IP. DEVICE=eth0 BOOTPROTO=none # have also tried "static" here HWADDR=00:13:72:*:*:* ONBOOT=yes TYPE=Ethernet NETMASK=255.255.255.0 IPADDR=173.*.*.161 GATEWAY=10.1.10.1 /etc/resolv.cnf is also set with the appropriate name servers from our ISP. When I ifdown eth0 then ifup eth0 I get... SIOCADDRT: Network is unreachable When I switch to DCHP, the machine has an IP assigned and there are no connection problems. Any ideas?

  Read the article

• How to detect VPN disconnection with vpnc?

  - by Abhinav

  What is the easiest way to detect that a vpnc connection on Linux/Ubuntu has disconnected? Manually, I think the way to detect is to check whether the interface (tun0) appears in /sbin/ifconfig output. Is there a better way to find out immediately, so that a script can be run to restart the connection?

  Read the article

• internet disconnects

  - by Smokezzaj

  Internet disconnects and reconnects, computer is in a peer to peer workstation with two other computers XP o/s. Only one computer has this problem the other two don't disconnect. Computer's connect to switch no router is being used. Ipconfig shows a DHCP connection, local area connection status shows packets being sent out but packets are not being received or being received at a extremely slow rate. Tried Winstock tool, reinstalling network card driver, restored to previous date, checked ethernet cable and release/renew IP.

  Read the article

• No network connectivity for my CentOS 6 installed in VMWare Fusion in MacOSX Lion

  - by gilzero

  I installed CentOS 6.2 (CentOS-6.2-x86_64-minimal.iso) with VMWare Fusion(Version 4.1.2). (Not with EasyInstall). I am using MacOSX Lion, connect to internet via WIFI. The centos installed does not have network connectivity. *How may I configure it to connect to wifi? * Thanks for any help. Below is screenshot of ifconfig: With the setting Network Adapter, I tried both NAT and Bridged WiFi.

  Read the article

• VMware virtual machine network devices malfunctioning

  - by sheepz

  I'm running Ubuntu 10.04 LTS and VMvware workstation 7.0.1 build-227600. The virtual machine i'm running in VMware is a custom distribution built on Debian Linux version 3.1. I'm still pretty much a beginner with UNIX administration. After having messed around with the vmware (changed only the name of the folder, the vmx and and other .v* files accordingly in which the .vmx was situated, and the configuration in the vmx file accordingly), the network devices on the virtual machine do not work anymore. The virtual machine is used for securely sending messages. The virtual machine: As far as I know, this perl file called proxy-gen-ifalias eth0 is responsible for properly setting up the two virtual network devices eth0 and eth1. The Virtual machine comes with a GUI interface in which I have set up two ethernet network devices, one internal, the other external. Now, after having messed around with this, the UI gives me this error message: perl proxy-gen-ifalias eth0 /etc/modprobe.d/alias-eth0 /sbin/update-modules perl proxy-gen-ifalias eth1 /etc/modprobe.d/alias-eth1 /sbin/update-modules ifdown eth0 ifdown: interface eth0 not configured ifdown eth1 ifdown: interface eth1 not configured perl proxy-gen-netcfg /etc/network/interfaces ifup eth0 SICCSIFADDR: No such device eth0: ERROR while getting interface flags: No such device SIOCSIFNETMASK: No such device eth0: ERROR while getting interface flags: No such device Failed to bring up eth0. ifconfig eth0 eth0: error fetching interface information: Device not found make: *** [/etc/network/interfaces] Error 1 ~ Here are the contents of the two perl files referred to in the message: paste.pocoo.org/show/2AMzAYhoCRZqlGY7wUFk/ proxy-gen-netcfg

  Read the article

• TP-LINK TD-W8151N Modem/router as just wi-fi router

  - by Reshma

  I am planning to buy TP-LINK ADSL wifi router (model TD-W8151N) for my Internet connection which provides Internet through ADSL telephone line. I am also planning to take cable internet in a few months which provides internet through a LAN cable without the need of any modem. So I would like to have my modem work for both connections which I am using. When using cable internet I want this TP-Link modem to work just as a wireless router (so that I can have the freedom to use my laptop in different rooms instead of sitting at a place by plugging in that cable). Is it possible to use this modem in that way? I don't have much knowledge about these things except that I can configure things as instructed. Please suggest me whether I should go ahead and buy this one or if there is any other modem in your view which can serve both my purposes, let me know. Operating System I am using: Windows 7

  Read the article

• Need help creating advanced context menu command in Windows 7 (x64)

  - by Craig

  I found out about ForceBindIP and I really love it, so much that I am using it regularly enough to where spamming the same command prompt over and over again is getting painful. Here's ForceBindIP and what it does: http://www.r1ch.net/stuff/forcebindip/ I'm on a 64-bit of Windows 7 Home Premium. What I want to do is add a right-click context menu item so that when I browse items in Windows Explorer, or on my desktop, I can automate a ForceBindIP command (through the prompt). I am permanently connected to two networks: one over ethernet, and one over wireless. My ethernet network takes priority. What I want to do is add a "Run through wireless network" context menu item, that will send the item through this command: ForceBindIP {5F657824-9E3B-46E5-C21E-F52585R6457E} "[path to right-clicked file here]" It will need to run that command in C:\Windows\SysWOW64. I've no experience at all playing with the Windows registry or writing batch files, anything of that sort. I was wondering if anyone here would be kind enough to assist me?

  Read the article

• Problem with Macbook air automatically not acquiring free wifi network dns or router address

  - by Rumsfeld

  I have this problem when my macbook air sometimes does not connect to free wifi hotspots. When the problem happens and I try to run the diagnostics, it normally gets to yellow network settings tab. It seems that it for some reason does not acquire automatically the router or dns address. Sometimes after I shut it down and restart it magically connects to the wifi hotspot but it is very inconsistent. Anyone knows a fix for this problem?

  Read the article

• Cent OS ifcfg configuration for ranges of IP's with different netmask

  - by Aaron Schlegel

  I have 1 set of 30 public IP's with a netmask of 255.255.255.0 and another set of 30 IP's with a netmask of 255.255.255.128. Both sets of IP's also have different gateways. How can I virtually assign the IP's to the machine? I have tried creating ifcfg-eth0:0 ifcfg-eth0:1 ifcfg-eth0:X ect for each IP. Below is my ifcfg file with. I have this for each IP with the correct gateway IP and netmask for each of my 60 IP's. If I do ip addr show it does show all of the 60 addresses with the correct broadcast IP and netmask. However I can only use 30 of my IP's that are from the same netmask. Am I doing this correctly? If the IP's show up with ip addr show does that mean I have correctly assigned them to the machine virtually? I want to check before I blame my hosting company for not routing the IP's correctly. DEVICE="eth0:1" BOOTPROTO="static" DNS1="**.**.**.**" DNS2="**.**.**.**" GATEWAY="2**.**.***.126" HOSTNAME="localhost.localdomain" HWADDR="0*:19:**:**:**:**" IPADDR="2**.*.**.**" IPV6INIT="no" MTU="1500" NETMASK="255.255.255.128" NM_CONTROLLED="yes" ONBOOT="yes" TYPE="Ethernet" Also is there a better way to do this? I have used ifcfg-eth0:0-range1 before to assign a range of IP's from the same netmask. Is it possible to do this with ranges with different netmask? Thanks!

  Read the article

• Network is going down once per day

  - by Charly

  Once per day the network on eth0 is going down and we need to do sudo ifdown eth0; sudo ifup eth0 to get the network up. Here is the syslog: Feb 11 12:48:01 www-tech-1 dhclient: DHCPREQUEST of address> on eth0 to 131.121.113.228 port 67 Feb 11 12:52:35 www-tech-1 dhclient: DHCPREQUEST of address> on eth0 to 131.121.113.228 port 67 Feb 11 12:56:23 www-tech-1 dhclient: DHCPREQUEST of address> on eth0 to 131.121.113.228 port 67 Feb 11 13:00:28 www-tech-1 dhclient: DHCPREQUEST of address> on eth0 to 131.121.113.228 port 67 Feb 11 13:04:29 www-tech-1 dhclient: DHCPREQUEST of address> on eth0 to 131.121.113.228 port 67 Feb 11 13:09:16 www-tech-1 dhclient: DHCPREQUEST of address> on eth0 to 131.121.113.228 port 67 Feb 11 13:13:53 www-tech-1 dhclient: DHCPREQUEST of address> on eth0 to 131.121.113.228 port 67 Feb 11 13:18:16 www-tech-1 dhclient: DHCPREQUEST of address> on eth0 to 131.121.113.228 port 67 Feb 11 13:22:25 www-tech-1 dhclient: DHCPREQUEST of address> on eth0 to 131.121.113.228 port 67 Feb 11 13:26:52 www-tech-1 dhclient: DHCPREQUEST of address> on eth0 to 131.121.113.228 port 67 Feb 11 13:30:44 www-tech-1 dhclient: DHCPREQUEST of address> on eth0 to 131.121.113.228 port 67 Feb 11 13:31:49 www-tech-1 dhclient: There is already a pid file /var/run/dhclient.eth0.pid with pid 3198 Feb 11 13:31:49 www-tech-1 dhclient: Listening on LPF/eth0/00:e0:81:49:fc:e0 Feb 11 13:31:49 www-tech-1 dhclient: Sending on LPF/eth0/00:e0:81:49:fc:e0 Feb 11 13:31:49 www-tech-1 dhclient: DHCPRELEASE on eth0 to 131.121.113.228 port 67 Feb 11 13:31:49 www-tech-1 dhclient: There is already a pid file /var/run/dhclient.eth0.pid with pid 134519072 Feb 11 13:31:50 www-tech-1 dhclient: Listening on LPF/eth0/00:e0:81:49:fc:e0 Feb 11 13:31:50 www-tech-1 dhclient: Sending on LPF/eth0/00:e0:81:49:fc:e0 Feb 11 13:31:52 www-tech-1 dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 Feb 11 13:31:52 www-tech-1 dhclient: DHCPREQUEST of 131.121.14.17 on eth0 to 255.255.255.255 port 67 Feb 11 13:31:53 www-tech-1 kernel: [265383.991682] eth0: no IPv6 routers present Please check the last portion of this syslog. Can anybody help me?

  Read the article

• Joining two routers together, but I have no access to the second router, although I know it's IP address and Gateway

  - by JohnnyVegas

  I have temporarily moved into a rented apartment for 4 months, which has wireless. The trouble I am having is that the access points here are wifi only and no RJ45 and I need to use RJ45 to connect some equipment that I am working with. I have purchased an RT-N66U and installed Tomato (shibby ver. 1.28) and successfully replaced the existing access point, but now I want to enable the access point that I have replaced as it links wirelessly to 3 others. Can I plug in a cable from the access point to my RT-N66U and get it to access the internet via my router? I have no access to the existing wireless access point, and don't want to reset it as it's not mine. There is another router situated in the roof somewhere which I also have no access to, but it's supplying my RT-N66U internet and I most definitely have a double-nat, which although isn't the best way of doing things I am limited with what I can do. Any suggestions on routing tables, vlans etc would be helpful, but I have no experience in these fields before - but I know the tomato firmware can cater for this. My router is set to IP 10.0.1.1 and dhcp is 10.0.1.100-200 The wireless access point address was 192.168.1.2 but this was assigned by the router in the roof which has the address 192.168.1.1. There is a cable from this router going to a wall socket which I now have my RT-N66u attached to via the WAN port. I understand it's scruffy and it isn't the way to do things but I have tried to ask for the admin details but as the wireless network is looked after by a third party and nobody knows their details I am stuck with this dilemma. I could buy three wireless access points and replace the existing but this isn't what I want to do, and although I have installed plenty of DD-WRT wireless repeater bridges they simply don't work here for some unknown reason. The phone line here is very noisy too and I don't have the rights to install ADSL in a building that isn't mine, and 3G coverage isn't good enough either. Thanks for your time

  Read the article

• Share laptop Wi-Fi with router set up as access point via ethernet cables

  - by obie

  I have an ADSL modem which serves as a wireless router. There's a laptop connected to it through cable. On the other room I have a laptop which is connected through the router wirelessly. Since I have other appliances that need to get connected but are not Wi-Fi capable I have another Wi-Fi router. How can I share the second laptop's Wi-Fi with the second router so that the router can then serve as an access point to give internet to my other appliances through ethernet cables? I want something like this: INTERNETMODEM (WIFI)LAPTOP 1 (WIFI)LAPTOP 2 (WIFI)Router 2 (ETHERNET)DREAMBOX & WDTV What I've tried so far is opened the admin interface of router 2 then set static IP 192.168.100.13 and disabled the DHCP. The DHCP of the main router starts with 192.168.100.1 then I hooked up router 2 with the laptop 2 through Cat5 cable but for some reason it's not working.

  Read the article

• When I ping Internet addresses like yahoo or Google, I get 2 reply packets and 2 lost packets.

  - by navi

  I have Airtel broadband and a Tata broadband connection. i have around 50 PCs connecting through an airtel broadband connection. Both are dsl connections with my phone line going into dsl modems and an Ethernet cable going from dsl modem directly into a switch. Currently, only airtel connection is connected with static IP on my private lan and using the airtel ISP DNS servers as DNS IP address and the default gateway is 192.168.1.1 (IP add. of the dsl modem). All PCs are connected in a work group. When in full use, my users complain of certain web pages are not opening. When I ping Internet addresses like Yahoo or Google I get 2 reply packets and 2 lost packets. I suspect that a single broadband connection is not able to sustain 50 simultaneous downloads/browsing. Is there any device which connect to both DSL and make one line so that its give me high speed simultaneous browsing. Help needed urgently. Thank you all to those who reply.

  Read the article

< Previous Page | 98 99 100 101 102 103 104 105 106 107 108 109  | Next Page >