Search Results

Search found 5398 results on 216 pages for 'xorg conf'.

Page 102/216 | < Previous Page | 98 99 100 101 102 103 104 105 106 107 108 109  | Next Page >

• Ubuntu 10.04 & IBM DS3524 with FC multipath, inactive path is [failed][faulty] instead of [active][ghost]

  - by Graeme Donaldson

  OK, this is my setup: FC Switches IBM/Brocade, Switch1 and Switch2, independent fabrics. Server IBM x3650 M2, 2x QLogic QLE2460, 1 connected to each FC Switch. Storage IBM DS3524, 2x controllers with 4x FC ports each, but only 2x connected on each. +-----------------------------------------------------------------------+ | HBA1 Server HBA2 | +-----------------------------------------------------------------------+ | | | | | | +-----------------------------+ +------------------------------+ | Switch1 | | Switch2 | +-----------------------------+ +------------------------------+ | | | | | | | | | | | | | | | | | | | | +-----------------------------------+-----------------------------------+ | Contr A, port 3 | Contr A, port 4 | Contr B, port 3 | Contr B, port 4 | +-----------------------------------+-----------------------------------+ | Storage | +-----------------------------------------------------------------------+ My /etc/multipath.conf is from the IBM redbook for the DS3500, except I use a different setting for prio_callout, IBM uses /sbin/mpath_prio_tpc, but according to http://changelogs.ubuntu.com/changelogs/pool/main/m/multipath-tools/multipath-tools_0.4.8-7ubuntu2/changelog, this was renamed to /sbin/mpath_prio_rdac, which I'm using. devices { device { #ds3500 vendor "IBM" product "1746 FAStT" hardware_handler "1 rdac" path_checker rdac failback 0 path_grouping_policy multibus prio_callout "/sbin/mpath_prio_rdac /dev/%n" } } multipaths { multipath { wwid xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx alias array07 path_grouping_policy multibus path_checker readsector0 path_selector "round-robin 0" failback "5" rr_weight priorities no_path_retry "5" } } The output of multipath -ll with controller A as the preferred path: root@db06:~# multipath -ll sdg: checker msg is "directio checker reports path is down" sdh: checker msg is "directio checker reports path is down" array07 (xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) dm-2 IBM ,1746 FASt [size=4.9T][features=1 queue_if_no_path][hwhandler=0] \_ round-robin 0 [prio=2][active] \_ 5:0:1:0 sdd 8:48 [active][ready] \_ 5:0:2:0 sde 8:64 [active][ready] \_ 6:0:1:0 sdg 8:96 [failed][faulty] \_ 6:0:2:0 sdh 8:112 [failed][faulty] If I change the preferred path using IBM DS Storage Manager to Controller B, the output swaps accordingly: root@db06:~# multipath -ll sdd: checker msg is "directio checker reports path is down" sde: checker msg is "directio checker reports path is down" array07 (xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) dm-2 IBM ,1746 FASt [size=4.9T][features=1 queue_if_no_path][hwhandler=0] \_ round-robin 0 [prio=2][active] \_ 5:0:1:0 sdd 8:48 [failed][faulty] \_ 5:0:2:0 sde 8:64 [failed][faulty] \_ 6:0:1:0 sdg 8:96 [active][ready] \_ 6:0:2:0 sdh 8:112 [active][ready] According to IBM, the inactive path should be "[active][ghost]", not "[failed][faulty]". Despite this, I don't seem to have any I/O issues, but my syslog is being spammed with this every 5 seconds: Jun 1 15:30:09 db06 multipathd: sdg: directio checker reports path is down Jun 1 15:30:09 db06 kernel: [ 2350.282065] sd 6:0:2:0: [sdh] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jun 1 15:30:09 db06 kernel: [ 2350.282071] sd 6:0:2:0: [sdh] Sense Key : Illegal Request [current] Jun 1 15:30:09 db06 kernel: [ 2350.282076] sd 6:0:2:0: [sdh] <<vendor>> ASC=0x94 ASCQ=0x1ASC=0x94 ASCQ=0x1 Jun 1 15:30:09 db06 kernel: [ 2350.282083] sd 6:0:2:0: [sdh] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 Jun 1 15:30:09 db06 kernel: [ 2350.282092] end_request: I/O error, dev sdh, sector 0 Jun 1 15:30:10 db06 multipathd: sdh: directio checker reports path is down Jun 1 15:30:14 db06 kernel: [ 2355.312270] sd 6:0:1:0: [sdg] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jun 1 15:30:14 db06 kernel: [ 2355.312277] sd 6:0:1:0: [sdg] Sense Key : Illegal Request [current] Jun 1 15:30:14 db06 kernel: [ 2355.312282] sd 6:0:1:0: [sdg] <<vendor>> ASC=0x94 ASCQ=0x1ASC=0x94 ASCQ=0x1 Jun 1 15:30:14 db06 kernel: [ 2355.312290] sd 6:0:1:0: [sdg] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 Jun 1 15:30:14 db06 kernel: [ 2355.312299] end_request: I/O error, dev sdg, sector 0 Does anyone know how I can get the inactive path to show "[active][ghost]" instead of "[failed][faulty]"? I assume that once I can get that right then the spam in my syslog will end as well. One final thing worth mentioning is that the IBM redbook doc targets SLES 11 so I'm assuming there's something a little different under Ubuntu that I just haven't figured out yet. Update: As suggested by Mitch, I've tried removing /etc/multipath.conf, and now the output of multipath -ll looks like this: root@db06:~# multipath -ll sdg: checker msg is "directio checker reports path is down" sdh: checker msg is "directio checker reports path is down" xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxdm-1 IBM ,1746 FASt [size=4.9T][features=0][hwhandler=0] \_ round-robin 0 [prio=1][active] \_ 5:0:2:0 sde 8:64 [active][ready] \_ round-robin 0 [prio=1][enabled] \_ 5:0:1:0 sdd 8:48 [active][ready] \_ round-robin 0 [prio=0][enabled] \_ 6:0:1:0 sdg 8:96 [failed][faulty] \_ round-robin 0 [prio=0][enabled] \_ 6:0:2:0 sdh 8:112 [failed][faulty] So its more or less the same, with the same message in the syslog every 5 minutes as before, but the grouping has changed.

  Read the article

• defunct dbus-daemon zombie freezes login for 30 seconds

  - by oldenburgb

  I'm running Ubuntu 12.04.2 LTS (Precise Pangolin) and noticed a 30 second delay whenever i log into my server via ssh or perform any kind of login via sudo on that machine. I can provoke immediate execution by killing the defunct dbus-daemon showing up during the delay: output of ps fax |grep dbus 19222 ? Ss 0:00 dbus-daemon --system --fork --activation=upstart 19752 ? Z 0:00 \_ [dbus-daemon] <defunct> taping into the dbus using dbus-monitor --system i'm getting: signal sender=org.freedesktop.DBus -> dest=(null destination) serial=7 path=/org/freedesktop/DBus; interface=org.freedesktop.DBus; member=NameOwnerChanged string ":1.4" string "" string ":1.4" each login. Stopping the dbus service eliminates this problem but probably causes many other... I'm not running xorg on the machine but the packages are present for X11 forwarding capabilities. I've ruled out the common motd script delay and ssh "UseDNS no" fixes one finds when looking up login delay issues. Many thanks in advance for any help with this, it's been driving me crazy ;-)

  Read the article

• Laptop with Intel Graphics: external VGA monitor only gets signal on boot (no "hot plugging")

  - by iveand

  I am able to get an external VGA monitor (or projector) to work if I start my laptop with it connected. However, if I start the laptop with it disconnected there is no signal on the external. The Displays screen shows the external, and thinks that it is active, but there is no signal being sent to it. This has been a persistent problem since 10.04 (I am now on 12.04.... each upgrade hoping something is improved). I should note that even when it works (starting with display connected), Displays still says the monitor is "unknown" (but it sends the signal). For the correct resolution to display, I have had to add a few xrandr lines for my monitor to my .xprofile file... otherwise resolution is limited to default 1024x768. So, resolution issues can be worked around, but the main issue is that the external doesn't get a signal without starting the machine with it connected. I have tried: adding i915.modeset=1 to grub (also i965.modeset=1 since someone posted that this helped even though lshw shows i915) adding following ppa and doing a dist-upgrade: sudo add-apt-repository ppa:xorg-edgers/ppa Here are the details: Laptop: Toshiba Tecra M10 lspci listings for video: 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) sudo lshw -C video listing: *-display:0 description: VGA compatible controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 07 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:46 memory:ff400000-ff7fffff memory:e0000000-efffffff ioport:cff8(size=8) *-display:1 UNCLAIMED description: Display controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 07 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:ffc00000-ffcfffff "System Info" shows my graphics as the following Mobile Intel® GM45 Express Chipset x86/MMX/SSE2

  Read the article

• Unity stuck in 2D mode, Nvidia Quadro graphics "unknown", Nvidia-Current active but not in use

  - by Jordan Lund

  I've seen this problem reported under several questions, but I haven't been able to resolve any of it so I thought I'd bring it all in under one umbrella. I started a new job and was given a Dell Precision M6400 laptop with Nvidia Quadro FX 2700M graphics card. It had a previous version of Ubuntu on it, but nobody had any passwords for it so I wiped the drive and did a fresh install of 11.10 from scratch. I didn't do any updates during installation, preferring to do them after boot. Updates ran fine and the system works... except Unity is in 2D mode. System Settings - Additional Drivers shows that Nvidia-Current is active but not in use. System Settings - System Info shows Graphics Driver Unknown, Experience Standard Nvidia X Server Settings is installed and working, re-writing the xorg.conf did nothing. /usr/lib/nux/unity_support_test -p OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: Quadro FX 2700M/PCI/SSE2 OpenGL version string: 3.3.0 NVIDIA 285.05.09 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: yes One suggestion was to do a sudo apt-get --purge remove nvidia* and that resulted in a scrambled screen on boot and a non-bootable installation. Pressing the Delete key on boot allowed me to access the recovery console and do a sudo apt-get install nvidia-current, which brought me back to a working, bootable system. Another suggestion was to edit /etc/default/grub and change the line reading "GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" to read "GRUB_CMDLINE_LINUX_DEFAULT="quiet splash vmalloc=192MB" thus allocating more video RAM. I did that, followed by a sudo update-grub and a re-boot. No change. Created a brand new standard user and logged on with that account, no change.

  Read the article

• How to calibrate Wacom tablets under Ubuntu Lucid?

  - by Calvin Fisher

  I've been using Wacom tablets on Linux for quite some time, almost exclusively in Ubuntu, and in previous versions I've used xidump to track input values. I would use that information to put calibration settings in my xorg.conf file. However, in the most recent Ubuntu release, this command does not exist, and the package wacom-tools that previously installed it has now been removed. Is there a new method for calibrating Wacom pads under Linux? Should I have been using a different method all along for obtaining this information?

  Read the article

• Why is my machine unable to mount my SMB drives ("CIFS VFS: Error connecting to socket. Aborting operation", return code -115)?

  - by downbeat

  I have a machine running Precise (12.04 x64), and I cannot mount my SMB drives (I have 3, we'll call them public, private and download). It used to work (a week or two ago) and I didn't touch fstab! The machine hosting the shares is a commercial NAS, and I'm not seeing anything that would indicate it's an issue with the NAS. I have an older machine which I updated to Precise at the same time (both fresh installed, not dist-upgrade), so should have a very similar configuration. It is not having any problems. I am not having problems on windows machines/partitions either, only one of my Precise machines. The two machines are using identical entries in fstab and identical /etc/samba/smb.conf files. I don't think I've ever changed smb.conf (has never mattered before). My fstab entries all basically look like this: //10.1.1.111/public /media/public cifs credentials=/home/downbeat/.credentials,iocharset=utf8,uid=downbeat,gid=downbeat,file_mode=0644,dir_mode=0755 0 0 Here's the dmesg output on boot: [ 51.162198] CIFS VFS: Error connecting to socket. Aborting operation [ 51.162369] CIFS VFS: cifs_mount failed w/return code = -115 [ 51.194106] CIFS VFS: Error connecting to socket. Aborting operation [ 51.194250] CIFS VFS: cifs_mount failed w/return code = -115 [ 51.198120] CIFS VFS: Error connecting to socket. Aborting operation [ 51.198243] CIFS VFS: cifs_mount failed w/return code = -115 There are no other errors I see in the dmesg output. Originally when I ran 'testparm -s', the output contained these lines ERROR: lock directory /var/run/samba does not exist ERROR: pid directory /var/run/samba does not exist Here's the samba related programs I have installed: $ dpkg --list|grep -i samba ii libpam-winbind 2:3.6.3-2ubuntu2.3 Samba nameservice and authentication integration plugins ii libwbclient0 2:3.6.3-2ubuntu2.3 Samba winbind client library ii nautilus-share 0.7.3-1ubuntu2 Nautilus extension to share folder using Samba ii python-smbc 1.0.13-0ubuntu1 Python bindings for Samba clients (libsmbclient) ii samba-common 2:3.6.3-2ubuntu2.3 common files used by both the Samba server and client ii samba-common-bin 2:3.6.3-2ubuntu2.3 common files used by both the Samba server and client ii winbind 2:3.6.3-2ubuntu2.3 Samba nameservice integration server $ dpkg --list|grep -i smb ii dmidecode 2.11-4 SMBIOS/DMI table decoder ii libsmbclient 2:3.6.3-2ubuntu2.3 shared library for communication with SMB/CIFS servers ii python-smbc 1.0.13-0ubuntu1 Python bindings for Samba clients (libsmbclient) ii smbclient 2:3.6.3-2ubuntu2.3 command-line SMB/CIFS clients for Unix ii smbfs 2:5.1-1ubuntu1 Common Internet File System utilities - compatibility package $ dpkg --list|grep -i cifs ii cifs-utils 2:5.1-1ubuntu1 Common Internet File System utilities ii libsmbclient 2:3.6.3-2ubuntu2.3 shared library for communication with SMB/CIFS servers ii smbclient 2:3.6.3-2ubuntu2.3 command-line SMB/CIFS clients for Unix I originally noticed that my other machine had "libpam-winbind" and "nautilus-share" installed and the machine with the issue did not. Installing those two packages solved my errors with 'testparm -s', but did not fix my issue. Finally, I tried to purge and reinstall these packages smbclient smbfs cifs-utils samba-common samba-common-bin Still no luck. Again, it used to work; now it doesn't. Very similarly configured machine works (but some packages are out of date on the working machine). The NAS has only one interface/IP address, nmblookup works to find it's IP from it's hostname (from the machine with the issue) and it responds to a ping. Please any help would be great. I've been searching on AskUbuntu, SuperUser, ubuntuforums and plain old search engines for a week now and it's driving me crazy!

  Read the article

• local app opening instead of ssh forwarded app over x

  - by The Journeyman geek

  i have a custom install of ubuntu 9.10 - xorg intel and its deps, icewm, xde and swiftfox from the swiftfox repos. I'm trying to start a ssh forwarded session of swiftfox from another system - which has the plain vanilla firefox version in the repos- with ssh -x [ipaddress] and then starting swiftfox from command line. When i start it though, it opens up the local copy of firefox instead of the copy of swiftfox on the other box. I have NO idea what's wrong...swiftfox dosen't open on the remote box, i am definately on the remote boxes terminal, and there's no way whatsoever it should open a local copy. I'm wondering what's wrong

  Read the article

• Couldn't pass the signin screen

  - by Amokrane

  I have an issue here with my computer using ubuntu 10.10 on a 64 bits machine. When I start it, I have the login screen, I enter my credentials but instead of starting the session it reloads the login screen again. I checked the disc using fsck and it seems clean. How should I proceed to diagnose and repair this issue? Thanks! [Edit] I went to the log files, this is what I got: auth.log pam_unix (gdm:session): session opened for user amokrane by (uid=0) pam_ck_connector (gdm:session): nox11 mode, ignoring PAM_TTY :0 pam_unix (gdm:session) :session closed for user amokrane messages.log No ACPI video bus found I also took a shot with my camera of the black screen that appears between the two login screens, it says something like: fsck from util-linux-ng 2.17.2 /dev/sdc4 : propre, xxxx files, xxxx blocs Starting AppArmor profiles Skipping profiles in /etc/apparmor.d/disable: usr.bin.firefox Setting sensors limits Starting postgreSQL ... /var/log/Xorg.0.log [ 25.375] (II) intel(0): Modeline "1920x1080"x60.0 172.80 ... [ 28.850] (II) Power Button: Close [ 28.850] (II) UnloadModule: "evdev" [ 29.910] (II) Power Button: Close [ 28.910] (II) UnloadModule: "evdev" [ 28.941] (II) AT Translated Set 2 keyboard: Close [ 29.000] (II) ImPS/2 Generic Wheel Mouse: Close [ 29.000] (II) UnloadModule: "evdev" [ 29.039] ddxSigGiveUp: Closing log Update I tried the following: Ctrl-Alt-F1 on the login screen (to runt the console). sudo pkill startx sudo rm /tmp/.X0-locl startx But it tells me that the x server is already running.

  Read the article

• Middle Mouse Button does not work in XFCE / Arch Linux

  - by Alp

  I have the XFCE desktop manager installed on my Arch Linux system. With E17 (Enlightenment desktop manager) i had no problems with my mouse: all buttons worked correctly out of the box. But in XFCE my middle mouse button does not fire an event at all (no output with xev). Evdev seems to identify my mouse correctly (Razer Deathadder) because it echoes its name in the xorg logs. I have no idea what could cause this and how to debug the problem. I start both e17 and xfce with startx. Here is my ~/.xinitrc: exec startxfce4 --with-ck-launch #exec enlightenment-start

  Read the article

• Dual Screen will only mirror after 12.04 upgrade

  - by Ne0

  I have been using Ubuntu with a dual screen for years now, after upgrading to 12.04 LTS i cannot get my dual screen working properly Graphics: 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV350 AR [Radeon 9600] 01:00.1 Display controller: Advanced Micro Devices [AMD] nee ATI RV350 AR [Radeon 9600] (Secondary) I noticed i was using open source drivers and attempted to install official binaries using the methods in this thread. Output: liam@liam-desktop:~$ sudo apt-get install fglrx fglrx-amdcccle Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be upgraded: fglrx fglrx-amdcccle 2 upgraded, 0 newly installed, 0 to remove and 12 not upgraded. Need to get 45.1 MB of archives. After this operation, 739 kB of additional disk space will be used. Get:1 http://gb.archive.ubuntu.com/ubuntu/ precise/restricted fglrx i386 2:8.960-0ubuntu1 [39.2 MB] Get:2 http://gb.archive.ubuntu.com/ubuntu/ precise/restricted fglrx-amdcccle i386 2:8.960-0ubuntu1 [5,883 kB] Fetched 45.1 MB in 1min 33s (484 kB/s) (Reading database ... 328081 files and directories currently installed.) Preparing to replace fglrx 2:8.951-0ubuntu1 (using .../fglrx_2%3a8.960-0ubuntu1_i386.deb) ... Removing all DKMS Modules Error! There are no instances of module: fglrx 8.951 located in the DKMS tree. Done. Unpacking replacement fglrx ... Preparing to replace fglrx-amdcccle 2:8.951-0ubuntu1 (using .../fglrx-amdcccle_2%3a8.960-0ubuntu1_i386.deb) ... Unpacking replacement fglrx-amdcccle ... Processing triggers for ureadahead ... ureadahead will be reprofiled on next reboot Setting up fglrx (2:8.960-0ubuntu1) ... update-alternatives: warning: forcing reinstallation of alternative /usr/lib/fglrx/ld.so.conf because link group i386-linux-gnu_gl_conf is broken. update-alternatives: warning: skip creation of /etc/OpenCL/vendors/amdocl64.icd because associated file /usr/lib/fglrx/etc/OpenCL/vendors/amdocl64.icd (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalcl.so because associated file /usr/lib32/fglrx/libaticalcl.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalrt.so because associated file /usr/lib32/fglrx/libaticalrt.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: forcing reinstallation of alternative /usr/lib/fglrx/ld.so.conf because link group i386-linux-gnu_gl_conf is broken. update-alternatives: warning: skip creation of /etc/OpenCL/vendors/amdocl64.icd because associated file /usr/lib/fglrx/etc/OpenCL/vendors/amdocl64.icd (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalcl.so because associated file /usr/lib32/fglrx/libaticalcl.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalrt.so because associated file /usr/lib32/fglrx/libaticalrt.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-initramfs: deferring update (trigger activated) update-initramfs: Generating /boot/initrd.img-3.2.0-25-generic-pae Loading new fglrx-8.960 DKMS files... Building only for 3.2.0-25-generic-pae Building for architecture i686 Building initial module for 3.2.0-25-generic-pae Done. fglrx: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/3.2.0-25-generic-pae/updates/dkms/ depmod....... DKMS: install completed. update-initramfs: deferring update (trigger activated) Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Setting up fglrx-amdcccle (2:8.960-0ubuntu1) ... Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.2.0-25-generic-pae Processing triggers for libc-bin ... ldconfig deferred processing now taking place liam@liam-desktop:~$ sudo aticonfig --initial -f aticonfig: No supported adapters detected When i attempt to get my settings back to what they were before upgrading i get this message requested position/size for CRTC 81 is outside the allowed limit: position=(1440, 0), size=(1440, 900), maximum=(1680, 1680) and GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._gnome_2drr_2derror_2dquark.Code3: requested position/size for CRTC 81 is outside the allowed limit: position=(1440, 0), size=(1440, 900), maximum=(1680, 1680) Any idea's on what i need to do to fix this issue?

  Read the article

• Machine freezes when configuring dual display on Ubuntu 9.10 (karmic)

  - by sa125

  Hi - I'm trying to configure dual displays on an Ubuntu 9.10 machine. When I connect the 2 screens (1 VGA input, the other DVI), I see them in a mirrored display. I opened up Display Settings and unchecked the 'mirror screens' box, and when I clicked apply, the machine froze and I had to force restart it. This happened repeatedly for about 6 times until I gave up. How do I set it up to boot up normally with dual display working? thanks. edit: I thought it might be related to the virtual screen size, so I tried to edit /etc/X11/xorg.conf to add: SubSection "Display" Virtual 2560 1024 EndSubSection But that didn't do much. Each screen works fine on it's own, and together with mirrored display.

  Read the article

• Drivers for NVIDIA 520M not working in Ubuntu 12.04

  - by Don

  I am aware that this is nominally a duplicate question, however I've read the other questions and haven't been able to resolve my problem after many hours and attempts, so please don't delete it. Additionally, it seems like many answers to the other questions are specifically dependent on certain situations. My situation being different from the others I found represented, here's my question. Until last night, I had Ubuntu 12.04 installed with Wubi, and it ran ok, though slowly and with occasional hangs. So I partitioned the drive and installed 12.04 in its own partition. Now when I start it, I am stuck using 2D. I believe this is an NVIDIA bug. My NVIDIA card is a GT 520M and my machine has Optimus. Additional Drivers only displays my wireless driver. Going to System Settings Details Graphics shows Driver:Unknown, Experience:Standard. I downloaded the driver from the NVIDIA website, and ran the installer with no errors, except that the "distribution-provided pre-install script failed". After rebooting, my screen was stuck at 640X480, which was fixed by editing /etc/X11/xorg.conf However, I still was stuck in 2D, and nothing else had changed either. A thread suggested something called Bumblebee. I tried that, and when I ran optirun firefoxI got a frozen blank screen. Following another suggestion, I checked the BIOS to try and disable Optimus. I found and ran myriad other commands to try and fix the problem and nothing changed. Now I have just done a clean re-install of Ubuntu. From there, I: Installed all the updates Downloaded the NVIDIA driver Installed it Got screen stuck at 640X480, fixed in xorg.conf. To recap the problem: I can't get the NVIDIA drivers working I am stuck using 2D I'm an idiot I think if the first one is solved, the solution to the second will naturally follow. If you need me to provide any other information, I'd be happy to. From what I've seen in other threads, I think this information may help: lsmod: dh@donsMachine:~$ lsmod Module Size Used by nvidia 12353161 0 snd_hda_codec_hdmi 32474 1 snd_hda_codec_realtek 223867 1 joydev 17693 0 parport_pc 32866 0 ppdev 17113 0 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 10 rfcomm,bnep snd_hda_intel 33773 3 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec uvcvideo 72627 0 videodev 98259 1 uvcvideo v4l2_compat_ioctl32 17128 1 videodev snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event lib80211_crypt_tkip 17390 0 wl 2568210 0 lib80211 14381 2 lib80211_crypt_tkip,wl snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 16 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device psmouse 87692 0 serio_raw 13211 0 i915 468745 2 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm drm_kms_helper 46978 1 i915 drm 242038 3 i915,drm_kms_helper mei 41616 0 i2c_algo_bit 13423 1 i915 mxm_wmi 12979 0 acer_wmi 28418 0 sparse_keymap 13890 1 acer_wmi video 19596 1 i915 wmi 19256 2 mxm_wmi,acer_wmi mac_hid 13253 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp tg3 152032 0 sdhci_pci 18826 0 sdhci 33205 1 sdhci_pci lspci -nn | grep VGA dh@donsMachine:~$ lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:0df7] (rev a1) lshw dh@donsMachine:~$ sudo lshw [sudo] password for dh: donsmachine description: Notebook product: EasyNote TS44HR () vendor: Packard Bell version: V1.12 serial: LXBWZ02017134209D71601 width: 64 bits capabilities: smbios-2.7 dmi-2.7 vsyscall32 configuration: boot=normal chassis=notebook uuid=16FE576B-CA15-11E0-B096-B870F4E51243 *-core description: Motherboard product: SJV50_HR vendor: Packard Bell physical id: 0 version: Base Board Version serial: Base Board Serial Number slot: Base Board Chassis Location *-firmware description: BIOS vendor: Packard Bell physical id: 0 version: V1.12 date: 07/11/2011 size: 1MiB capacity: 2496KiB capabilities: pci upgrade shadowing cdboot bootselect edd int13floppynec int13floppytoshiba int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int9keyboard int10video acpi usb biosbootspecification *-memory description: System Memory physical id: 1b slot: System board or motherboard size: 4GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NS-CG vendor: Nanya Technology physical id: 0 serial: 598E126E slot: ChannelA-DIMM0 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: DIMM [empty] physical id: 1 slot: ChannelA-DIMM1 *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NS-CG vendor: Nanya Technology physical id: 2 serial: 159E126C slot: ChannelB-DIMM0 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: DIMM [empty] physical id: 3 slot: ChannelB-DIMM1 *-cpu description: CPU product: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz vendor: Intel Corp. physical id: 2e bus info: cpu@0 version: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz slot: CPU1 size: 2GHz capacity: 4GHz width: 64 bits clock: 1333MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer xsave avx lahf_lm arat epb xsaveopt pln pts tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=2 enabledcores=2 threads=4 *-cache:0 description: L1 cache physical id: 30 slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through instruction *-cache:1 description: L2 cache physical id: 31 slot: L2 Cache size: 256KiB capacity: 256KiB capabilities: synchronous internal write-through unified *-cache:2 description: L3 cache physical id: 32 slot: L3 Cache size: 3MiB capacity: 3MiB capabilities: synchronous internal write-through unified *-cache description: L1 cache physical id: 2f slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through data *-pci description: Host bridge product: 2nd Generation Core Processor Family DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 09 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-pci:0 description: PCI bridge product: Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port vendor: Intel Corporation physical id: 1 bus info: pci@0000:00:01.0 version: 09 width: 32 bits clock: 33MHz capabilities: pci pm msi pciexpress normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:2000(size=4096) memory:d0000000-d10fffff ioport:a0000000(size=301989888) *-display description: VGA compatible controller product: NVIDIA Corporation vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:16 memory:d0000000-d0ffffff memory:a0000000-afffffff memory:b0000000-b1ffffff ioport:2000(size=128) memory:d1000000-d107ffff *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:43 memory:d1400000-d17fffff memory:c0000000-cfffffff ioport:3000(size=64) *-communication description: Communication controller product: 6 Series/C200 Series Chipset Family MEI Controller #1 vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=mei latency=0 resources: irq:42 memory:d1a04000-d1a0400f *-usb:0 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 04 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:16 memory:d1a0a000-d1a0a3ff *-multimedia description: Audio device product: 6 Series/C200 Series Chipset Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:44 memory:d1a00000-d1a03fff *-pci:1 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: b4 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:17 memory:9fb00000-9fbfffff ioport:d1800000(size=1048576) *-network description: Ethernet interface product: NetLink BCM57785 Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 10 serial: b8:70:f4:e5:12:43 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi msix pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 firmware=sb latency=0 link=no multicast=yes port=twisted pair resources: irq:16 memory:d1830000-d183ffff memory:d1840000-d184ffff memory:d1850000-d18507ff *-generic:0 description: SD Host controller product: NetXtreme BCM57765 Memory Card Reader vendor: Broadcom Corporation physical id: 0.1 bus info: pci@0000:02:00.1 version: 10 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=sdhci-pci latency=0 resources: irq:17 memory:d1800000-d180ffff *-generic:1 UNCLAIMED description: System peripheral product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0.2 bus info: pci@0000:02:00.2 version: 10 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d1810000-d181ffff *-generic:2 UNCLAIMED description: System peripheral product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0.3 bus info: pci@0000:02:00.3 version: 10 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d1820000-d182ffff *-pci:2 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: b4 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 memory:d1900000-d19fffff *-network description: Wireless interface product: BCM43225 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth1 version: 01 serial: 68:a3:c4:44:81:96 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 ip=192.168.0.12 latency=0 multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:d1900000-d1903fff *-usb:1 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 04 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:d1a09000-d1a093ff *-isa description: ISA bridge product: HM65 Express Chipset Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 04 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 logical name: scsi1 version: 04 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:41 ioport:3098(size=8) ioport:30bc(size=4) ioport:3090(size=8) ioport:30b8(size=4) ioport:3060(size=32) memory:d1a08000-d1a087ff *-disk description: ATA Disk product: ST9500325AS vendor: Seagate physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 0001 serial: S2W1AMSX size: 465GiB (500GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=a45f21e9 *-volume:0 description: Windows NTFS volume physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: 3.1 serial: 46aa-2a25 size: 19GiB capacity: 20GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2011-08-25 21:32:00 filesystem=ntfs label=PQSERVICE state=clean *-volume:1 description: Windows NTFS volume physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 version: 3.1 serial: 10aa-ad1a size: 98MiB capacity: 100MiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2011-08-25 21:32:03 filesystem=ntfs label=SYSTEM RESERVED state=clean *-volume:2 description: Windows NTFS volume physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 version: 3.1 serial: 668c5afc-182e-ff4b-b084-3cc09f54972d size: 395GiB capacity: 395GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2011-08-25 21:32:03 filesystem=ntfs label=Don's Machine state=clean *-volume:3 description: Extended partition physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 size: 49GiB capacity: 49GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 3945MiB capabilities: nofs *-logicalvolume:1 description: Linux filesystem partition physical id: 6 logical name: /dev/sda6 logical name: / capacity: 46GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered state=mounted *-cdrom description: DVD-RAM writer product: DVD-RW DVRTD11RS vendor: PIONEER physical id: 1 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/sr0 version: 1.01 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-serial UNCLAIMED description: SMBus product: 6 Series/C200 Series Chipset Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 04 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:d1a06000-d1a060ff ioport:3040(size=32) *-power UNCLAIMED description: OEM_Define1 product: OEM_Define5 vendor: OEM_Define2 physical id: 1 version: OEM_Define6 serial: OEM_Define3 capacity: 75mWh *-battery description: Lithium Ion Battery product: CRB Battery 0 vendor: -Virtual Battery 0- physical id: 2 version: 10/12/2007 serial: Battery 0 slot: Fake

  Read the article

• Hancon / Hanwang Graphics Tablet not recognised

  - by Martin Kyle

  I'm totally lost. I've just built a new system and installed Ubuntu 12.04. It's my first time with Linux and getting into the terminal / command line for the first time since IBMDOS 5 and Windows 3.1 has been a steep learning curve. However, the interface works beautifully apart from it doesn't recognize my Hanvon Artmaster AM1209. I have sent diagnostics to Digimend and Favux was kind enough to advise that the tablet should be using the Wacom X driver as the Hanvon is actually a Hanwang and these should be supported. lsusb reports: ID 0b57:8501 Beijing HanwangTechnology Co., Ltd xinput list reports: ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? PS/2+USB Mouse id=8 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Power Button id=7 [slave keyboard (3)] ? Eee PC WMI hotkeys id=9 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=10 [slave keyboard (3)] Favux suggested inspecting /var/log/Xorg.0.log for the tablet but I cannot see any mention of it, and that is as far as I have got. I've tried researching the problem but I am struggling with all the new terminology and the fact that I want the PC to be a means to an end and not the end in itself where I spend the rest of my days tweaking and testing rather than just using it. Hope there is some help out there.

  Read the article

• Dell Latitude will not boot after fresh Ubuntu 12.10 installation. Black screen

  - by James

  I have an old dell latitude d610 that I've just installed ubuntu 12.10 onto, and now unfortunately it will not complete booting up. The screen flashes purple but then fades out and dies. I'm fairly sure there is an issue with graphics drivers, as I had to turn on "nomodeset" in the options when installing off a DVD to see the installer, but I'm very new to linux and don't know terribly much at all apart from what I've read on the net. I have been able to hold down shift and bring up GRUB, and entered into recovery mode, and when I enter into the low graphics mode, the xserver log file says it can detect a screen but found none with a useable configuration, then goes on to say a fatal server error has occurred and no screen have been found at all, telling me to check a log file at "/var/log/xorg.0.log" I have no idea how to check this specific log file! Attempting to actually go further than this in low graphics mode and restart the display simply artefacts the screen. It is all very strange and annoying because I did once by random have the machine boot completely for no apparent reason, but upon restarting the issue reoccurred.

  Read the article

• Sound & video problem with Toshiba Satellite L35-SP1011

  - by Diego Garcia

  I've installed Ubuntu 10.04 on a Satellite L35-SP1011 and there's no sound. Actually i have many video problems cause i had to disable effect because when it had effect activated, laptop got frozen many times. I saw this problem but in older ubuntu versions and tried some fixes without success. Any idea on how to solve my audio and video problems? I've tried these instructions https://help.ubuntu.com/community/RadeonDriver without success. My video card is a ATI Express 200M. lspci output 00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller (rev 01) 00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80) 00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80) 01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M] complete lspci output at http://pastebin.com/AVk1WWQt Update #1 - It's the same on Ubuntu 10.10 and Kubuntu 10.10... Slow graphics, and no sound. Update #2 - Sound SOLVED I edited /etc/modprobe/alsa-base.conf in Ubuntu 10.10 and added options snd-hda-intel model=asus Now i'm working on video, I added xorg-edgers ppa, updated and upgraded without big difference... it's working better but without transparency.

  Read the article

• Windows expand over 2 monitors in quad-monitor setup

  - by Martin

  i just installed ubuntu 11.10 with my previous hardware setup: 4 monitors and 2 identical nvidia graphic cards. draging windows around all 4 monitors works nice, but when i maximize a window it expand always over 2 screens. (2x twinview). i had an workaround for this in 11.04 but cant remember what it was... may one of you guys have quad monitors up and running with window maximizing on only one screen my xorg.conf looks like this: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 280.13 (buildd@allspice) Thu Aug 11 20:54:45 UTC 2011 # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 280.13 ([email protected]) Wed Jul 27 17:15:58 PDT 2011 Section "ServerLayout" # Removed Option "Xinerama" "1" # Removed Option "Xinerama" "0" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" 0 1080 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Samsung SMB2220N" HorizSync 31.0 - 80.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "Samsung SMB2220N" HorizSync 31.0 - 80.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 550 Ti" BusID "PCI:2:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 550 Ti" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "TwinView" "True" # Removed Option "MetaModes" "nvidia-auto-select, nvidia-auto-select" # Removed Option "metamodes" "CRT-0: nvidia-auto-select 1920x1080 +0+0, CRT-1: nvidia-auto-select 1920x1080 +1920+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "CRT-0: nvidia-auto-select +0+0, CRT-1: nvidia-auto-select +1920+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "TwinView" "True" # Removed Option "MetaModes" "nvidia-auto-select, nvidia-auto-select" # Removed Option "metamodes" "CRT-0: nvidia-auto-select 1920x1080 +0+0, CRT-1: nvidia-auto-select 1920x1080 +1920+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "CRT-0: nvidia-auto-select +0+0, CRT-1: nvidia-auto-select +1920+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection

  Read the article

• Which Ubuntu version to use on a MAXDATA laptop Eco 3100X ? with this system info

  - by Erjet Malaj

  i am speaking as new ubuntu user, i just have installed ubuntu 10.04 on my laptop, but is running very slow... So i am here to ask you a question: WHich ubuntu version can fit for my laptop MAXDATA Eco 3100x, . My Laptop System Information are: SYSTEM INFORMATION Running Ubuntu Linux, the Ubuntu 10.04 (lucid) release. GNOME: 2.30.2 (Ubuntu 2010-06-25) Kernel version: 2.6.32-40-generic (#87-Ubuntu SMP Mon Mar 5 20:26:31 UTC 2012) GCC: 4.4.3 (i486-linux-gnu) Xorg: unknown (25 February 2012 06:59:39AM) (25 February 2012 06:59:39AM) Hostname: lotus-laptop Uptime: 0 days 1 h 6 min CPU INFORMATION GenuineIntel, Intel(R) Pentium(R) 4 CPU 2.40GHz Number of CPUs: 1 CPU clock currently at 2390.561 MHz with 512 KB cache Numbering: family(15) model(2) stepping(7) Bogomips: 4781.12 Flags: fpu vme de pse tsc msr pae mce cx8 mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe up pebs bts cid MEMORY INFORMATION Total memory: 228 MB Total swap: 455 MB STORAGE INFORMATION SCSI device - scsi0 Vendor: ATA Model: IBM-DJSA-210 SCSI device - scsi1 Vendor: TOSHIBA Model: DVD-ROM SD-C2502 HARDWARE INFORMATION MOTHERBOARD Host bridge Silicon Integrated Systems [SiS] 650/M650 Host (rev 11) PCI bridge(s) Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) USB controller(s) Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10) Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10) Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10) Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20) Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10) Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10) Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10) Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20) ISA bridge Silicon Integrated Systems [SiS] SiS962 [MuTIOL Media IO] (rev 04) IDE interface Silicon Integrated Systems [SiS] 5513 [IDE] (prog-if 80 [Master]) Subsystem: Silicon Integrated Systems [SiS] 5513 [IDE] GRAPHIC CARD VGA controller Silicon Integrated Systems [SiS] 65x/M650/740 PCI/AGP VGA Display Adapter Subsystem: Uniwill Computer Corp Device 5103 SOUND CARD Multimedia controller Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0) Subsystem: Uniwill Computer Corp Device 5203 NETWORK Ethernet controller Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91) Subsystem: Uniwill Computer Corp Device 5002 Modem Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0) Subsystem: Uniwill Computer Corp Device 4003 Thanks you asap. :-) E

  Read the article

• Resolution stuck after playing OpenGL game

  - by kit.yang

  I used to start the game,Frozen Throne (using wine) with the option of "-opengl".When I entered the game,the resolution will changed,and restored after exit the game. But this time a problem happened.The resolution can't restore although I restart my computer several times. Both the Ubuntu pane and login windows are exceptional. nvidia-settingsalso detect the resolution is "1024 x 768",But it seemed useless using this tool. Screenshot-NVIDIA X Server Settings: the result of xrandr: Screen 0: minimum 320 x 240, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 50.0* 800x600 51.0 52.0 53.0 680x384 54.0 55.0 640x480 56.0 576x432 57.0 512x384 58.0 400x300 59.0 60.0 61.0 320x240 62.0 the configure of /etc/X11/xorg.conf: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 1.0 (buildd@yellow) Fri Apr 9 11:51:21 UTC 2010 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin Identifier "Monitor0" VendorName "Unknown" ModelName "CRT-0" HorizSync 28.0 - 55.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Entry Graphics" EndSection Section "Screen" # Removed Option "metamodes" "1024x768 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "1024x768_60 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Screen becomes black after pressing dash or alt-tab

  - by cegerxwin

  I did an upgrade from 11.04 to 11.10. Unity 3d becomes a black screen after pressing the dash-button or after pressing alt-tab to switch between open windows. I can see the panel on the top(lock,sound,..) and the panel on the left (launcher) but the rest is black. It looks like a maximised black window. The open Windows are active but I cant see them. I logout by pressing logout in the right top corner and pressing enter (because logout is default focused on the dialogue screen) and leave unity3d. Unity3d worked with 11.04 very good. If I press the dash button the dash looks like an 16-Bit or 8-Bit window and buttons for maximise, minimise and close are displayed and looks inverted. I have rebooted my notebook just now and log in to Unity 3D and tested some features of Unity and everything works well. The black thing is only a layer. I can use my desktop but cant see anything because of the layer, but everything works. It seems so, that a layer appear when pressing dash or alt-tab and does not disappear when close dash or choose a running app with alt-tab. you will see the necessary info related video problems: Unity support: /usr/lib/nux/unity_support_test -p OpenGL vendor string: X.Org R300 Project OpenGL renderer string: Gallium 0.4 on ATI RC410 OpenGL version string: 2.1 Mesa 7.11-devel Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: yes xorg glxinfo lspci -nn | grep VGA 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RC410 [Radeon Xpress 200M] [1002:5a62]

  Read the article

• Acer aspire one d270 can not set brightness

  - by Marko

  I hope you can help me figure out how to set the brightness at my netbook. Following problem appears since I installed ubuntu 11.10 on my acer: I am not able to adjust the brightness by FN Keys nor manually at "systemsettings-display". After searching with google for a while, I found a way via the terminal to adjust it with the folloqing command: "sudo setpci -s 00:02.0 f4.b=7f" ( from 00-9f). That was a major breakthrough for me as I am still new to Linux OS. But still seeking a way to get the FN keys for brightness to work, I kept searching until I found "askubuntu.com". I read through various Questions by other acer users and tried there solutions, but unfortunately none worked out for me. From this thread: fn + arrow keys don't adjust actual brightness on an Acer Aspire 5740 "sudo gedit /etc/X11/xorg.conf". This command did not work because the file was not found. I also used nano instead of gedit, but the file was empty( I think it just created the file since it did not exist). These commands which i found gave me a boot loop and I had to repair ubuntu: sudo gedit /etc/default/grub Change the line GRUB_CMDLINE_LINUX="" into GRUB_CMDLINE_LINUX="acpi_osi=Linux" sudo update-grub From this post Screen Brightness not adjustable for Acer Aspire S3: I tried the solution from the last post, but it did not work either. Does anyone know what I could try? I would appreciate it, if someone could help me out with this. Thanks in advance Netbook specs: CPU: Intel Atom N2600 Memory: 2gb DDR3 Storage: 320 GB HD GPU: Intel GMA 3600

  Read the article

• Problems with both LightDM and GDM using DisplayLink USB monitor

  - by Austin

  When I use LightDM, it will auto-login to desktop just fine. The only problem is Compiz doesn't work, and menus don't work. I can't right-click the desktop, and I can't select program menus in the top bar (I.e clicking "File" does nothing). When I use GDM, I only get a blank blue screen and the mouse cursor. I can't Ctrl+Alt+Backspace to restart, but I can Ctrl+Alt+F1 and Ctrl+Alt+F7 to switch modes. I don't think it's auto-logging me in, but I'm not sure. It plays the login screen noise. Will update with more information when I get home! EDIT: Okay, so I did a fresh install, just to ensure I hadn't borked something playing in the console. I reconfigured my setup as I did before, with the same results. Here's what I followed. The only difference is that instead of setting "vga=normal nomodeset" I set "GRUB_GFXPAYLOAD_LINUX = text". Also I only have the DisplayLink monitor configured in my xorg.conf file. At this point I'm using the open radeon driver, although I used the proprietary ati driver before. I'm not sure if I'm having a problem with: - X configuration - Graphics driver - DisplayLink driver - Unity - LightDM - Compiz - Or something else The resolution of the monitor is 800x480, 16bit. I tried setting a larger virtual resolution of 1200x720 (because the real resolution is lower than the recommended resolution), but it causes Ubuntu to boot into low graphics mode. When I get home I'm going to install the fglrx driver and see if it enables virtual resolutions, which may further enable my window manager to function properly.

  Read the article

• How to enable Unity 3D support in 12.04 using open-source drivers for RadeonHD cards?

  - by martin

  As the title says I can't enable the Unity 3D support when I'm using open-source drivers (xorg-edgers). I have an xfx Radeon HD 6950 by the way. If I install the proprietary 12.3 drivers from AMD it works, but I get poorer 2D performance than the open-source drivers and also I get some freezes and lock ups at random. So because of this I'm trying the open-source drivers and so far no issues at all, except this one. Running this command $ /usr/lib/nux/unity_support_test -p shows this: OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 0x300) OpenGL version string: 2.1 Mesa 8.0.2 Not software rendered: no Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no And this command $ lspci -nn | grep VGA shows: 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Cayman PRO [Radeon HD 6950] [1002:6719] So, is this normal? Do I need to go back to proprietary drivers to enable Unity 3D? If anyone can give me help, I'll much appreciate it.

  Read the article

• How to force a resolution in linux?

  - by hi

  I have a HP LP3065 that requires a dual link dvi cable to go up to 2560x1600 resolution. However, I do not have that cable, but I want to use 1920x1200 resolution. However, my nVidia Display Settings (also system display settings) will only go up to 1280x1024, which looks horribly pixelated on the 30". How do I force the 1920x1200 resolution? I tried adding the mode into my xorg.conf file, but it still would not take it. I know my vid card can do 1920x1200 since it works on the 24" monitor with the same dvi cable. Here are my specs: Fedora 12 Nvidia Quadro NVS 420 Intel Xenon E5530 cpu 6gig memory Thanks

  Read the article

• How to find out which python script is using resources?

  - by Jesse the Wind Wanderer

  Can someone tell me how to find out which python script is using lots of system resources? I can see with the 'top' command that a process called "python" is always near the top of the list. 2603 jesse 20 0 159m 27m 13m S 6 1.4 1:47.74 python Can someone tell me how to find this specific python script's name? I could go through the arduous process of disabling startup apps/processes until I finally found the one that starts this python process but there must be a better way of determining what exactly this python process is, yes? Doing a ps -AH doesn't yield anything useful. ps -AH 1 ? 00:00:00 init ... 1325 ? 00:00:00 lightdm 1382 tty7 00:01:57 Xorg 2265 ? 00:00:00 lightdm 2510 ? 00:00:00 gnome-session 2546 ? 00:00:00 ssh-agent 2560 ? 00:00:02 gnome-settings- 2582 ? 00:00:01 syndaemon 2578 ? 00:00:49 compiz 3009 ? 00:00:00 sh 3010 ? 00:00:01 gtk-window-deco 2590 ? 00:00:00 nm-applet 2591 ? 00:00:00 bluetooth-apple 2592 ? 00:00:00 indicator-ubunt 2593 ? 00:00:00 gnome-fallback- 2600 ? 00:00:05 nautilus 2601 ? 00:00:00 everpad 2603 ? 00:02:24 python

  Read the article

• How to reduce RAM consumption when my server is idle

  - by Julien Genestoux

  We use Slicehost, with 512MB instances. We run Ubuntu 9.10 on them. I installed a few packages, and I'm now trying to optimize RAM consumption before running anything on there. A simple ps gives me the list of running processes : # ps faux USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 2 0.0 0.0 0 0 ? S< Jan04 0:00 [kthreadd] root 3 0.0 0.0 0 0 ? S< Jan04 0:15 \_ [migration/0] root 4 0.0 0.0 0 0 ? S< Jan04 0:01 \_ [ksoftirqd/0] root 5 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [watchdog/0] root 6 0.0 0.0 0 0 ? S< Jan04 0:04 \_ [events/0] root 7 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [cpuset] root 8 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [khelper] root 9 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [async/mgr] root 10 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [xenwatch] root 11 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [xenbus] root 13 0.0 0.0 0 0 ? S< Jan04 0:02 \_ [migration/1] root 14 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [ksoftirqd/1] root 15 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [watchdog/1] root 16 0.0 0.0 0 0 ? S< Jan04 0:07 \_ [events/1] root 17 0.0 0.0 0 0 ? S< Jan04 0:02 \_ [migration/2] root 18 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [ksoftirqd/2] root 19 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [watchdog/2] root 20 0.0 0.0 0 0 ? R< Jan04 0:07 \_ [events/2] root 21 0.0 0.0 0 0 ? S< Jan04 0:04 \_ [migration/3] root 22 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [ksoftirqd/3] root 23 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [watchdog/3] root 24 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [events/3] root 25 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [kintegrityd/0] root 26 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [kintegrityd/1] root 27 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [kintegrityd/2] root 28 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [kintegrityd/3] root 29 0.0 0.0 0 0 ? S< Jan04 0:01 \_ [kblockd/0] root 30 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [kblockd/1] root 31 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [kblockd/2] root 32 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [kblockd/3] root 33 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [kseriod] root 34 0.0 0.0 0 0 ? S Jan04 0:00 \_ [khungtaskd] root 35 0.0 0.0 0 0 ? S Jan04 0:05 \_ [pdflush] root 36 0.0 0.0 0 0 ? S Jan04 0:06 \_ [pdflush] root 37 0.0 0.0 0 0 ? S< Jan04 1:02 \_ [kswapd0] root 38 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [aio/0] root 39 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [aio/1] root 40 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [aio/2] root 41 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [aio/3] root 42 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [jfsIO] root 43 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [jfsCommit] root 44 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [jfsCommit] root 45 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [jfsCommit] root 46 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [jfsCommit] root 47 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [jfsSync] root 48 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [xfs_mru_cache] root 49 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [xfslogd/0] root 50 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [xfslogd/1] root 51 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [xfslogd/2] root 52 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [xfslogd/3] root 53 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [xfsdatad/0] root 54 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [xfsdatad/1] root 55 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [xfsdatad/2] root 56 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [xfsdatad/3] root 57 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [xfsconvertd/0] root 58 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [xfsconvertd/1] root 59 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [xfsconvertd/2] root 60 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [xfsconvertd/3] root 61 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [glock_workqueue] root 62 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [glock_workqueue] root 63 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [glock_workqueue] root 64 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [glock_workqueue] root 65 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [delete_workqueu] root 66 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [delete_workqueu] root 67 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [delete_workqueu] root 68 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [delete_workqueu] root 69 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [kslowd] root 70 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [kslowd] root 71 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [crypto/0] root 72 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [crypto/1] root 73 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [crypto/2] root 74 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [crypto/3] root 77 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [net_accel/0] root 78 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [net_accel/1] root 79 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [net_accel/2] root 80 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [net_accel/3] root 81 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [sfc_netfront/0] root 82 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [sfc_netfront/1] root 83 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [sfc_netfront/2] root 84 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [sfc_netfront/3] root 310 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [kstriped] root 315 0.0 0.0 0 0 ? S< Jan04 0:00 \_ [ksnapd] root 1452 0.0 0.0 0 0 ? S< Jan04 4:31 \_ [kjournald] root 1 0.0 0.1 19292 948 ? Ss Jan04 0:15 /sbin/init root 1545 0.0 0.1 13164 1064 ? S Jan04 0:00 upstart-udev-bridge --daemon root 1547 0.0 0.1 17196 996 ? S<s Jan04 0:00 udevd --daemon root 1728 0.0 0.2 20284 1468 ? S< Jan04 0:00 \_ udevd --daemon root 1729 0.0 0.1 17192 792 ? S< Jan04 0:00 \_ udevd --daemon root 1881 0.0 0.0 8192 152 ? Ss Jan04 0:00 dd bs=1 if=/proc/kmsg of=/var/run/rsyslog/kmsg syslog 1884 0.0 0.2 185252 1200 ? Sl Jan04 1:00 rsyslogd -c4 103 1894 0.0 0.1 23328 700 ? Ss Jan04 1:08 dbus-daemon --system --fork root 2046 0.0 0.0 136 32 ? Ss Jan04 4:05 runsvdir -P /etc/service log: gems/custom_require.rb:31:in `require'??from /mnt/app/superfeedr-firehoser/current/script/component:52?/opt/ruby-enterprise/lib/ruby/si root 2055 0.0 0.0 112 32 ? Ss Jan04 0:00 \_ runsv chef-client root 2060 0.0 0.0 132 40 ? S Jan04 0:02 | \_ svlogd -tt ./main root 2056 0.0 0.0 112 28 ? Ss Jan04 0:20 \_ runsv superfeedr-firehoser_2 root 2059 0.0 0.0 132 40 ? S Jan04 0:29 | \_ svlogd /var/log/superfeedr-firehoser_2 root 2057 0.0 0.0 112 28 ? Ss Jan04 0:20 \_ runsv superfeedr-firehoser_1 root 2062 0.0 0.0 132 44 ? S Jan04 0:26 \_ svlogd /var/log/superfeedr-firehoser_1 root 2058 0.0 0.0 18708 316 ? Ss Jan04 0:01 cron root 2095 0.0 0.1 49072 764 ? Ss Jan04 0:06 /usr/sbin/sshd root 9832 0.0 0.5 78916 3500 ? Ss 00:37 0:00 \_ sshd: root@pts/0 root 9846 0.0 0.3 17900 2036 pts/0 Ss 00:37 0:00 \_ -bash root 10132 0.0 0.1 15020 1064 pts/0 R+ 09:51 0:00 \_ ps faux root 2180 0.0 0.0 5988 140 tty1 Ss+ Jan04 0:00 /sbin/getty -8 38400 tty1 root 27610 0.0 1.4 47060 8436 ? S Apr04 2:21 python /usr/sbin/denyhosts --daemon --purge --config=/etc/denyhosts.conf --config=/etc/denyhosts.conf root 22640 0.0 0.7 119244 4164 ? Ssl Apr05 0:05 /usr/sbin/console-kit-daemon root 10113 0.0 0.0 3904 316 ? Ss 09:46 0:00 /usr/sbin/collectdmon -P /var/run/collectdmon.pid -- -C /etc/collectd/collectd.conf root 10114 0.0 0.2 201084 1464 ? Sl 09:46 0:00 \_ collectd -C /etc/collectd/collectd.conf -f As you can see there is nothing serious here. If I sum up the RSS line on all this, I get the following : # ps -aeo rss | awk '{sum+=$1} END {print sum}' 30096 Which makes sense. However, I have a pretty big surprise when I do a free: # free total used free shared buffers cached Mem: 591180 343684 247496 0 25432 161256 -/+ buffers/cache: 156996 434184 Swap: 1048568 0 1048568 As you can see 60% of the available memory is already consumed... which leaves me with only 40% to run my own applications if I want to avoid swapping. Quite disapointing! 2 questions arise : Where is all this memory? How to take some of it back for my own apps?

  Read the article

< Previous Page | 98 99 100 101 102 103 104 105 106 107 108 109  | Next Page >