binding - Page 103 - Developer IT

SelectedValue and SelectedValuePath in Silverlight 4

In this article we will see about SelectedValue and SelectedValuePath while Binding. This feature is added in Silverlight 4.

authbind, privbind or iptables REDIRECT (port 80 to 8080)?

Hi, I'd like to run Glassfish v3 as a non-privileged user on Linux (Debian), but make it available on port 80. I'm currently doing this with iptables: iptables -t nat -I PREROUTING -p tcp -d x.x.x.x --dport 80 -j REDIRECT --to-port 8080 This works, but I wonder: If this has any significant performance impact compared to binding directly to port 80 If I could make a similar setup also work for HTTPS (or if that must run on 443) If there's a way to avoid other users from binding to port 8080 (in case my server crashes) - maybe block that port permanently to other users somehow? ...or if I should use authbind/privbind instead? Problem: I couldn't make it work with authbind or privbind so far. For authbind, I edited asadmin's last line to: exec authbind --deep "$JAVA" -Djava.net.preferIPv4Stack=true -jar ... For privbind: exec privbind -u glassfish "$JAVA" -Djava.net.preferIPv4Stack=true -jar ... (Only) with these settings, I can successfully perform a create-domain --domainport 80. This proves, that authbind and privbind actually work (the authbind version of the script is called by the glassfish user; the privbind version is called by root of course). However, in both cases I get the following exception, when starting the domain (start-domain): [#|2010-03-20T13:25:21.925+0100|SEVERE|glassfishv3.0|javax.enterprise.system.core.com.sun.enterprise.v3.server|_ThreadID=11;_ThreadName=FelixStartLevel;|Shutting down v3 due to startup exception : Permission denied: 80=com.sun.enterprise.v3.services.impl.monitor.MonitorableSelectorHandler@1fc25e5|#] I haven't found a solution for that yet (after searching the web, it seems, that this isn't so easy?) But maybe, the solution with iptables is good enough - what do you think? Thanks, Chris

Read the article

IIS URL Rewrite HTTP to HTTPS with Port

- by Andy Arismendi

My website has two bindings: 1000 and 1443 (port 80/443 are in use by another website on the same IIS instance). Port 1000 is HTTP, port 1443 is HTTPS. What I want to do is redirect any incoming request using "htt p://server:1000" to "htt ps://server:1443". I'm playing around with IIS 7 rewrite module 2.0 but I'm banging my head against the wall. Any insight is appreciated! BTW the rewrite configuration below works great with a site that has an HTTP binding on port 80 and HTTPS binding on port 443, but it doesn't work with my ports. P.S. My URLs intentionally have spaces because the 'spam prevention mechanism' kicked in. For some reason google login doesn't work anymore so I had to create an OpenID account (No Script could be the culprit). I'm not sure how to get XML to display nicely so I added spaces after the opening brackets. < ?xml version="1.0" encoding="utf-8"? < configuration < system.webServer < rewrite < rules < rule name="HTTP to HTTPS redirect" stopProcessing="true" < match url="(.*)" / < conditions trackAllCaptures="true" < add input="{HTTPS}" pattern="off" / < /conditions < action type="Redirect" redirectType="Found" url="htt ps: // {HTTP_HOST}/{R:1}" / < /rule < /rules < /rewrite < /system.webServer < /configuration

Read the article

Getting Error while running RED5 server - class path resource [red5.xml] cannot be opened because it does not exist

- by sunil221

HI , I have installed java version "1.6.0_14" and Ant version 1.8.2 for red5 Server. when i am trying to run red5 server i am getting the following error please help Root: /usr/local/red5 Deploy type: bootstrap Logback selector: org.red5.logging.LoggingContextSelector Setting default logging context: default 11:27:39.838 [main] INFO org.red5.server.Launcher - Red5 Server 1.0.0 RC1 $Rev: 4171 $ (http://code.google.com/p/red5/) Red5 Server 1.0.0 RC1 $Rev: 4171 $ (http://code.google.com/p/red5/) SLF4J: Class path contains multiple SLF4J bindings. SLF4J: Found binding in [jar:file:/usr/local/red5/red5.jar!/org/slf4j/impl/StaticLoggerBinder.class] SLF4J: Found binding in [jar:file:/usr/local/red5/lib/logback-classic-0.9.26.jar!/org/slf4j/impl/StaticLoggerBinder.class] SLF4J: See http://www.slf4j.org/codes.html#multiple_bindings for an explanation. 11:27:39.994 [main] INFO o.s.c.s.FileSystemXmlApplicationContext - Refreshing org.springframework.context.support.FileSystemXmlApplicationContext@39d85f79: startup date [Mon Dec 21 11:27:39 EST 2009]; root of context hierarchy 11:27:40.149 [main] INFO o.s.b.f.xml.XmlBeanDefinitionReader - Loading XML bean definitions from class path resource [red5.xml] Exception org.springframework.beans.factory.BeanDefinitionStoreException: IOException parsing XML document from class path resource [red5.xml]; nested exception is java.io.FileNotFoundException: class path resource [red5.xml] cannot be opened because it does not exist Bootstrap complete

Read the article

Getting Error while running RED5 server - class path resource [red5.xml] cannot be opened because it does not exist

- by sunil221

HI , I have installed java version "1.6.0_14" and Ant version 1.8.2 for red5 Server. when i am trying to run red5 server i am getting the following error please help Root: /usr/local/red5 Deploy type: bootstrap Logback selector: org.red5.logging.LoggingContextSelector Setting default logging context: default 11:27:39.838 [main] INFO org.red5.server.Launcher - Red5 Server 1.0.0 RC1 $Rev: 4171 $ (http://code.google.com/p/red5/) Red5 Server 1.0.0 RC1 $Rev: 4171 $ (http://code.google.com/p/red5/) SLF4J: Class path contains multiple SLF4J bindings. SLF4J: Found binding in [jar:file:/usr/local/red5/red5.jar!/org/slf4j/impl/StaticLoggerBinder.class] SLF4J: Found binding in [jar:file:/usr/local/red5/lib/logback-classic-0.9.26.jar!/org/slf4j/impl/StaticLoggerBinder.class] SLF4J: See http://www.slf4j.org/codes.html#multiple_bindings for an explanation. 11:27:39.994 [main] INFO o.s.c.s.FileSystemXmlApplicationContext - Refreshing org.springframework.context.support.FileSystemXmlApplicationContext@39d85f79: startup date [Mon Dec 21 11:27:39 EST 2009]; root of context hierarchy 11:27:40.149 [main] INFO o.s.b.f.xml.XmlBeanDefinitionReader - Loading XML bean definitions from class path resource [red5.xml] Exception org.springframework.beans.factory.BeanDefinitionStoreException: IOException parsing XML document from class path resource [red5.xml]; nested exception is java.io.FileNotFoundException: class path resource [red5.xml] cannot be opened because it does not exist Bootstrap complete

Read the article

SSL in IIS 7 on a subdomain in a web farm

- by justjoshingyou

I have been having one of the most frustrating days in my entire IT career. I am trying to install an SSL certificate on a subdomain in a web farm. http://shop.mydomain.com needs to ALWAYS be forced to https://shop.mydomain.com I have a temporary cert issued from verisign on shop.mydomain.com I have installed the cert on the server. The website for shop.mydomain.com is set as a host header in IIS with the DNS entry pointed to the same IP as mydomain.com - which is our load balancer. I actually have 2 load balancers (as needed by our ISP). One redirects all traffic on port 80 out to the different servers on port 80. The other pushes out port 443 to the servers on port 443. shop.mydomain.com is to be the only site protected by SSL at this time. When I add the binding and I navigate to https://shop.mydomain.com it pops up with a warning about the cert being invalid (assumed because this is a test cert), and then it sends the user to http. So, I checked the box "Require SSL and it redirects to http://shop.mydomain.com/default.aspx and displayes an ASP.NET 404 error message. (not the IIS 404 error) I tried removing the binding on the site to port 80 as well with no luck. I am nearly ready to crawl under my desk into the fetal position. How on earth do I make this work? I can't even get it to work on one machine, let alone in the load balanced environment.

Read the article

IIS7 - Web Deployment Tool - SetParam/SetParamFile to set http and https bindings + Cert

- by Andras Zoltan

Hi, we're currently using the MS Web Deployment Tool to sync a live website and some WebServices from a staging box to two live servers. The staging box hosts the site on any IP on port 17000, whereas the two live servers are load-balanced and have a different IP for each of them. At present, I generate two separate packages for deployment - one for each machine - using the sync operation and specifying a DestinationBinding parameter as follows: msdeploy -verb:sync -source:WebServer,computerName=localhost -dest:package="machinename.zip" -setParam:type="DestinationBinding",scope="SiteName",value="ip_address:port:". (Split across multiple lines to make it easier to read!) I run this twice, with a different target filename and ip address for each of the two machines. When it comes to deployment, I simply do a sync from each package to its respective live site. I know, I know - I should be able to do it by generating one parameterised package and then perhaps using the SetParamFile switch for each of the two Servers - believe me I'd like to, but the documentation on doing this is frankly non-existent. Now I need to configure and deploy both HTTP and HTTPS binding for this site; including also the ssl cert that is to be used. I've added an SSL binding for the site on the staging box - which uses a development cert (which will need to be replaced - or should the staging box be using the live cert?), and now the above command line has the effect of replacing the target IP on both http and https entries. It appears that I cannot specify multiple bindings plus the cert information in the DestinationBinding value in the -setParam above, so anyone know how would I go about doing this? Any help greatly appreciated.

Read the article

Ping server NETBIOS name returns wrong IP and "Destination host unreachable"

- by music2myear

Problem server is Windows 2008 R2 VM running on VMWare ESXi 4 host. Single network adapter manually assigned single IP address (192.168.1.11). When I ping the server from any other network computer, it returns 192.168.1.124 and "Destination host unreachable". Yesterday I found a second network adapter assigned to this server with an IP of 169.254... indicating it had no real valid IP. Using the MAC addresses I determined which adapter was not needed/not wanted, and removed it using VMWare systems. This is the network Printer Server and, understandably, nothing is printing right now. I've looked at the solutions here Why was my ping answered by a different IP address than the one pinged? and they aren't applicable to my situation for the following reasons: Output of arp -a on another computer returns the correct IP address (.1.11) assigned to the correct MAC address, the incorrect IP .1.124 is not listed, and the MAC of the network adapter I removed yesterday is not listed at all. I checked out the Microsoft KB article which listed pretty much my exact symptoms ( http://support.microsoft.com/kb/981953 ) and it says to check binding orders and look for hidden adapters. But there are no hidden adapters, and there is only one Network Adapter listed in the Binding Order list. Essentially, I can communicate from the server TO any other network device, but I cannot communicate from any other network device TO the server. Help! UPDATE: Solution found, see this solution for the details.

Read the article

How should I deploy my JVM-based web application on ubuntu?

- by Pieter Breed

I've developed a web application using clojure/compojure (JVM based) and while developing I tested it using embedded jetty that runs on 0.0.0.0:8080. I would now like to deploy it to run on port 80 on ubuntu. I do dynamic virtual hosting, so any request for any host that arrives on port 80 should be handled by my application. The issues that worries me are: I can still run it embedded but I'm worried about running my app as root (needed for binding to port 80). I'm not sure if I can 'give up root' when in the JVM. Do I need to be concerned by this? besides, serving web applications is a known problem and I should be using known solutions for this (jetty or tomcat) but especially tomcat seems very heavy weight. Besides, I only have one application that listens to /* and does routing internally. (with compojure/ring). What I'm trying to say with this is that tomcat by default assigns WARs to subfolders which I don't want. So basically what I need is some very safe way of binding to port 80 on ubuntu that can with minimal interference send all requests to my app. Any ideas?

Read the article

Emacs 24.1: How do I restore i-search Ctrl-Y behavior from older versions?

- by Eric

In emacs 24.1, when you do Ctrl-Y in an interactive search, it yanks the kill buffer into the search string ("it pastes the clipboard contents" in any-other-app's language) and tries to match it. In the last 20 versions or so, pressing Ctrl-Y matches the rest of the current line. I have two very common use cases: Match this line, revert the buffer, and search for the line (less often:) Where else is this text in the buffer? I tried modifying /lisp/isearch.el, switching the bindings for isearch-yank-line (which I want) and isearch-yank-kill (which I'm fine binding to the ridiculous \M-s\C-e key sequence). But I don't think this file even gets picked up. But I don't think this file even gets loaded. If I explicitly load it, I still get the 24.1 behavior. Here's my change: (add-hook 'isearch-mode-hook (lambda () (define-key isearch-mode-map "\C-y" 'isearch-yank-line) (define-key isearch-mode-map "\M-s\C-e" 'isearch-yank-kill) )) No change in the behavior. I even tried hacking isearch.el, still no change. This is on Windows btw, but I suspect it doesn't matter. Could someone tell me how I can restore the old binding?

Read the article

Friendly Intranet Addresses

- by Jmyster

Relativly new to IIS. I'm attempting to set up multiple sites in my Intranet on one server. The server already has SharePoint Installed on it and has a binding *:80. So when I type //ServerName I get the home page of SharePoint. I get how that works. I set up a new site in IIS and set the Binding to *:30015. On a remote machine if I type //ServerName:30015 in a web browser, I get the new site. Awesome, working as intended. My Questions: Can/How do i set it up so that I can type //DivisionAppName or //Division.AppName and have it resolve itself to //ServerName:30015? Is this something I have to register with my Company's DNS server? I hope not, getting my corprate IT to assist is a nightmare. What I tried: I have added Bindings with the Host Name filled in with both DivisionAppName or Division.AppName and port 30015 but that doesn't seem to work.

Read the article

Where does Firefox store cerificates and how to delete one?

- by majid4466

Hi all, The root cause of my problem is not known to me, whatever it is, I experience frequent DNS failures. When it happens I cannot browse to my Gmail inbox. I use two DNS settings. One is the public DNS server offered by OpenDNS, and the other is Google's free DNS server. When this happens I switch from the active setting to the other one and the problem goes away. But there is a side effect to this. When browsing to Gmail fails to load, after switching the DNS I receive an error saying the security certificate the site uses is only valid for OpenDNS. This my wild guess at what is going on: OpenDNS fails to resolve mail.google.com to its IP, My ISP sends me a page showing search results for 'mail.google.com' Since I have received some sort of page instead of a timeout, the browser, mistakenly, binds the certificate it has cached for 'mail.google.com' to the new domain. This search page is not served by https so not exception is thrown by the wrong binding After switching the DNS, the domain is correctly resolved to Gmail server's IP and since his is on https the handshake is triggered. Now, because of the wrong binding, which passed quietly as no handshake was involved, I receive the error saying the certificate used by 'mail.google.com' is only good for openDNS I don't know much about DNS, less about https and the process of establishing a secure connection. How correct is my explanation? How can I delete the wrong association and/or the certificate? Thanks for listening. P. S. The problem goes away by itself, but sometimes it takes several hours before Gmail works again.

Read the article

Where does Firefox store cerificates and how to delete one?

- by majid4466

Hi all, The root cause of my problem is not known to me, whatever it is, I experience frequent DNS failures. When it happens I cannot browse to my Gmail inbox. I use two DNS settings. One is the public DNS server offered by OpenDNS, and the other is Google's free DNS server. When this happens I switch from the active setting to the other one and the problem goes away. But there is a side effect to this. When browsing to Gmail fails to load, after switching the DNS I receive an error saying the security certificate the site uses is only valid for OpenDNS. This my wild guess at what is going on: 1. OpenDNS fails to resolve mail.google.com to its IP, 2. My ISP sends me a page showing search results for 'mail.google.com' 3. Since I have received some sort of page instead of a timeout, the browser, mistakenly, binds the certificate it has cached for 'mail.google.com' to the new domain. This search page is not served by https so not exception is thrown by the wrong binding 4. After switching the DNS, the domain is correctly resolved to Gmail server's IP and since his is on https the handshake is triggered. 5. Now, because of the wrong binding, which passed quietly as no handshake was involved, I receive the error saying the certificate used by 'mail.google.com' is only good for openDNS I don't know much about DNS, less about https and the process of establishing a secure connection. How correct is my explanation? How can I delete the wrong association and/or the certificate? Thanks for listening. P. S. The problem goes away by itself, but sometimes it takes several hours before Gmail works again.

Read the article

Why is my WCF Rest Service on IIS7 Authenticating TWICE!?!?

- by TheAggie

Ok, if someone could shed some light on this for me, I would greatly appreciate it. So here we go. I had a rest service running fine the other day but after I accidentally overwrote the web.config all hell broke loose. I've spent the past day and a half trying to sort things out but I can't seem to figure out what is missing or misplaced. So, I've designed this service around WCF Rest Contrib (http://wcfrestcontrib.codeplex.com)'s authentication process. Now, I can get this working fine on my localhost w/ the current web.config (minus the endpoint entry) but once I upload it to discountasp and select "basic authorization" in the ISS7 Manager, it appears that I'm getting authenticated twice! Once using my discount asp.net user/pass and then the next time using the application user/pass. Unfortunately I only provide one set of credentials and don't want to hard code my discountasp account info into the app. Like I said before, this worked fine a few days ago. Anyway. here is my web.config as it is now: <?xml version="1.0"?> <configuration> <connectionStrings> <add name="SQL2008_ConnectionString" connectionString="Data Source=sql2k8xx.discountasp.net;Initial Catalog=SQL2008_xx;Persist Security Info=True;User ID=SQL2008_xx_user;Password=myPass" providerName="System.Data.SqlClient" /> </connectionStrings> <system.web> <httpRuntime maxRequestLength="204800" executionTimeout="3600"/> <compilation debug="true"> <assemblies> <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </assemblies> </compilation> <httpModules> <add name="ServiceAnonymityModule" type="WcfRestContrib.Web.ServiceAnonymityModule, WcfRestContrib"/> </httpModules> </system.web> <system.codedom> <compilers> <compiler language="c#;cs;csharp" extension=".cs" warningLevel="4" type="Microsoft.CSharp.CSharpCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <providerOption name="CompilerVersion" value="v3.5"/> <providerOption name="WarnAsError" value="false"/> </compiler> </compilers> </system.codedom> <system.webServer> <validation validateIntegratedModeConfiguration="false"/> <modules> <remove name="ServiceAnonymityModule"/> <add name="ServiceAnonymityModule" type="WcfRestContrib.Web.ServiceAnonymityModule, WcfRestContrib"/> </modules> <handlers> <remove name="WebServiceHandlerFactory-Integrated"/> </handlers> </system.webServer> <system.diagnostics> <trace autoflush="true" /> </system.diagnostics> <system.serviceModel> <serviceHostingEnvironment aspNetCompatibilityEnabled="false"> <baseAddressPrefixFilters> <add prefix="http://www.mydomain.com/myServiceBaseAddress"/> </baseAddressPrefixFilters> </serviceHostingEnvironment> <extensions> <behaviorExtensions> <add name="webAuthentication" type="WcfRestContrib.ServiceModel.Configuration.WebAuthentication.ConfigurationBehaviorElement, WcfRestContrib, Version=1.0.5.0, Culture=neutral, PublicKeyToken=89183999a8dc93b5"/> <add name="errorHandler" type="WcfRestContrib.ServiceModel.Configuration.ErrorHandler.BehaviorElement, WcfRestContrib, Version=1.0.5.0, Culture=neutral, PublicKeyToken=89183999a8dc93b5"/> <add name="webFormatter" type="WcfRestContrib.ServiceModel.Configuration.WebDispatchFormatter.ConfigurationBehaviorElement, WcfRestContrib, Version=1.0.5.0, Culture=neutral, PublicKeyToken=89183999a8dc93b5"/> <add name="webErrorHandler" type="WcfRestContrib.ServiceModel.Configuration.WebErrorHandler.ConfigurationBehaviorElement, WcfRestContrib, Version=1.0.5.0, Culture=neutral, PublicKeyToken=89183999a8dc93b5"/> </behaviorExtensions> </extensions> <bindings> <customBinding> <binding name="HttpStreamedRest"> <httpTransport maxReceivedMessageSize="209715200" manualAddressing="true" /> </binding> <binding name="HttpsStreamedRest"> <httpsTransport maxReceivedMessageSize="209715200" manualAddressing="true" /> </binding> </customBinding> </bindings> <behaviors> <serviceBehaviors> <behavior name="Rest"> <webAuthentication requireSecureTransport="false" authenticationHandlerType="WcfRestContrib.ServiceModel.Dispatcher.WebBasicAuthenticationHandler, WcfRestContrib" usernamePasswordValidatorType="MyLibrary.Runtime.SecurityValidator, MyLibrary" source="MyRESTServiceRealm"/> <webFormatter> <formatters defaultMimeType="application/xml"> <formatter mimeTypes="application/xml,text/xml" type="WcfRestContrib.ServiceModel.Dispatcher.Formatters.PoxDataContract, WcfRestContrib"/> <formatter mimeTypes="application/json" type="WcfRestContrib.ServiceModel.Dispatcher.Formatters.DataContractJson, WcfRestContrib"/> <formatter mimeTypes="application/x-www-form-urlencoded" type="WcfRestContrib.ServiceModel.Dispatcher.Formatters.FormUrlEncoded, WcfRestContrib"/> </formatters> </webFormatter> <errorHandler errorHandlerType="WcfRestContrib.ServiceModel.Web.WebErrorHandler, WcfRestContrib"/> <webErrorHandler returnRawException="true" logHandlerType="MyLibrary.Runtime.LogHandler, MyLibrary" unhandledErrorMessage="An error has occured processing your request. Please contact technical support for further assistance."/> </behavior> </serviceBehaviors> </behaviors> </system.serviceModel> </configuration> So, whenever I upload this and change the ISS setting to Basic Authentication, it looks like it is trying to use the default handler for authentication as if I try to enter my web app user/pass, I get an error screen which has the following detailed information about the moduel/handler Detailed Error Information Module: IIS Web Core Notification: AuthenticateRequest Handler: svc-ISAPI-2.0 Error Code: 0x80070005 Requested URL: http://www.mydomain.com:80/MyService.../MyService.svc Physical Path: E:\web\xxxxxx\htdocs\MyServiceBaseAddress\MyService.svc Logon Method: Not yet determined Logon User: Not yet determined Now for the fun stuff... i tried providing my discountasp.net account username/password for kicks and sure enough it responded properly for any [OperationContract] which doesn't have [OperationAuthentication] defined (which is only one or two of the operations I have). I thought this was strange, so I looked at fiddler and saw something interesting. Whenever I try request a procedure with [OperationAuthentication] defined and provide my discountasp.net username/pass I get two different "WWW-Authenticate" headers back in Fiddler: WWW-Authenticate: Basic realm="MyRESTServiceRealm" WWW-Authenticate: Basic realm="www.mydomain.com" On the other hand, if I try to access the same procedures with only my application's user/pass, I only get the site's header: WWW-Authenticate: Basic realm="www.mydomain.com" My hypothesis is that for some reason I'm having to pass through the default "Basic Authorization" layer set by IIS before I can get to the application's "Custom Basic Authorization" layer. After verifying this by created an identical user/pass for my service that I use for my discountasp.net account, I was able to successfully pass both layers of authentication without any issues... so I think I can conclude that this is indeed the issue. Now how do I disable the default one? Do I need to do this in the IIS Manager, or in the web.config? Anyway, I have absolutely no idea how this is possible or what I need to do to resolve the issue, but I know that something is seriously out of whack. Any suggestions would be greatly appreciated! Thanks.

Read the article

How to consume PHP SOAP service using WCF

- by mr.b

I am new in web services so apologize me if I am making some cardinal mistake here, hehe. I have built SOAP service using PHP. Service is SOAP 1.2 compatible, and I have WSDL available. I have enabled sessions, so that I can track login status, etc. I don't need some super security here (ie message-level security), all I need is transport security (HTTPS), since this service will be used infrequently, and performances are not so much of an issue. I am having difficulties making it to work at all. C# throws some unclear exception ("Server returned an invalid SOAP Fault. Please see InnerException for more details.", which in turn says "Unbound prefix used in qualified name 'rpc:ProcedureNotPresent'."), but consuming service using PHP SOAP client behaves as expected (including session and all). So far, I have following code. note: due to amount of real code, I am posting minimal code configuration PHP SOAP server (using Zend Soap Server library), including class(es) exposed via service: <?php class Verification_LiteralDocumentProxy { protected $instance; public function __call($methodName, $args) { if ($this->instance === null) { $this->instance = new Verification(); } $result = call_user_func_array(array($this->instance, $methodName), $args[0]); return array($methodName.'Result' => $result); } } class Verification { private $guid = ''; private $hwid = ''; /** * Initialize connection * * @param string GUID * @param string HWID * @return bool */ public function Initialize($guid, $hwid) { $this->guid = $guid; $this->hwid = $hwid; return true; } /** * Closes session * * @return void */ public function Close() { // if session is working, $this->hwid and $this->guid // should contain non-empty values } } // start up session stuff $sess = Session::instance(); require_once 'Zend/Soap/Server.php'; $server = new Zend_Soap_Server('https://www.somesite.com/api?wsdl'); $server->setClass('Verification_LiteralDocumentProxy'); $server->setPersistence(SOAP_PERSISTENCE_SESSION); $server->handle(); WSDL: <definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:tns="https://www.somesite.com/api" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap-enc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" name="Verification" targetNamespace="https://www.somesite.com/api"> <types> <xsd:schema targetNamespace="https://www.somesite.com/api"> <xsd:element name="Initialize"> <xsd:complexType> <xsd:sequence> <xsd:element name="guid" type="xsd:string"/> <xsd:element name="hwid" type="xsd:string"/> </xsd:sequence> </xsd:complexType> </xsd:element> <xsd:element name="InitializeResponse"> <xsd:complexType> <xsd:sequence> <xsd:element name="InitializeResult" type="xsd:boolean"/> </xsd:sequence> </xsd:complexType> </xsd:element> <xsd:element name="Close"> <xsd:complexType/> </xsd:element> </xsd:schema> </types> <portType name="VerificationPort"> <operation name="Initialize"> <documentation> Initializes connection with server</documentation> <input message="tns:InitializeIn"/> <output message="tns:InitializeOut"/> </operation> <operation name="Close"> <documentation> Closes session between client and server</documentation> <input message="tns:CloseIn"/> </operation> </portType> <binding name="VerificationBinding" type="tns:VerificationPort"> <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/> <operation name="Initialize"> <soap:operation soapAction="https://www.somesite.com/api#Initialize"/> <input> <soap:body use="literal"/> </input> <output> <soap:body use="literal"/> </output> </operation> <operation name="Close"> <soap:operation soapAction="https://www.somesite.com/api#Close"/> <input> <soap:body use="literal"/> </input> <output> <soap:body use="literal"/> </output> </operation> </binding> <service name="VerificationService"> <port name="VerificationPort" binding="tns:VerificationBinding"> <soap:address location="https://www.somesite.com/api"/> </port> </service> <message name="InitializeIn"> <part name="parameters" element="tns:Initialize"/> </message> <message name="InitializeOut"> <part name="parameters" element="tns:InitializeResponse"/> </message> <message name="CloseIn"> <part name="parameters" element="tns:Close"/> </message> </definitions> And finally, WCF C# consumer code: [ServiceContract(SessionMode = SessionMode.Required)] public interface IVerification { [OperationContract(Action = "Initialize", IsInitiating = true)] bool Initialize(string guid, string hwid); [OperationContract(Action = "Close", IsInitiating = false, IsTerminating = true)] void Close(); } class Program { static void Main(string[] args) { WSHttpBinding whb = new WSHttpBinding(SecurityMode.Transport, true); ChannelFactory<IVerification> cf = new ChannelFactory<IVerification>( whb, "https://www.somesite.com/api"); IVerification client = cf.CreateChannel(); Console.WriteLine(client.Initialize("123451515", "15498518").ToString()); client.Close(); } } Any ideas? What am I doing wrong here? Thanks!

Read the article

Need help debugging a very basic PHP SOAP Hello world app

- by WarDoGG

I have been breaking my head at this, reading almost every article and tutorial there is on the web, but nothing doing.. i still cannot get my first web service application to work. I would really appreciate it if anyone could debug this code for me and provide me with a good explanation as to what is wrong and why. This will help indeed ! Thanks ! I have pasted below the entire codes that i am using making it easier to debug. I'm using the PHP5 SOAP extension. Here is my WSDL: <?xml version="1.0" encoding="utf-8"?> <wsdl:definitions name="testWebservice" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://tempuri.org/" xmlns:s1="http://microsoft.com/wsdl/types/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"> <wsdl:types> <s:schema elementFormDefault="qualified" targetNamespace="http://tempuri.org/"> <s:import namespace="http://microsoft.com/wsdl/types/" /> <s:element name="getUser"> <s:complexType> <s:sequence> <s:element minOccurs="0" maxOccurs="1" name="username" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="password" type="s:string" /> </s:sequence> </s:complexType> </s:element> <s:element name="getUserResponse"> <s:complexType> <s:sequence> <s:element minOccurs="0" maxOccurs="1" name="getUserResult" type="tns:userInfo" /> </s:sequence> </s:complexType> </s:element> <s:complexType name="userInfo"> <s:sequence> <s:element minOccurs="1" maxOccurs="1" name="ID" type="s:int" /> <s:element minOccurs="1" maxOccurs="1" name="authkey" type="s:int" /> </s:sequence> </s:complexType> </s:schema> </wsdl:types> <wsdl:message name="getUserSoapIn"> <wsdl:part name="parameters" element="tns:getUser" /> </wsdl:message> <wsdl:message name="getUserSoapOut"> <wsdl:part name="parameters" element="tns:getUserResponse" /> </wsdl:message> <wsdl:portType name="testWebservice"> <wsdl:operation name="getUser"> <wsdl:input message="tns:getUserSoapIn" /> <wsdl:output message="tns:getUserSoapOut" /> </wsdl:operation> </wsdl:portType> <wsdl:binding name="testWebserviceBinding" type="tns:testWebservice"> <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" /> <wsdl:operation name="getUser"> <soap:operation soapAction="http://tempuri.org/getUser" /> <wsdl:input> <soap:body use="literal" /> </wsdl:input> <wsdl:output> <soap:body use="literal" /> </wsdl:output> </wsdl:operation> </wsdl:binding> <wsdl:service name="testWebserviceService"> <wsdl:port name="testWebservicePort" binding="tns:testWebserviceBinding"> <soap:address location="http://127.0.0.1/nusoap/storytruck/index.php" /> </wsdl:port> </wsdl:service> </wsdl:definitions> and here is the PHP Code i use to setup the server: <?php function getUser($user,$pass) { return array('ID'=>1); } ini_set("soap.wsdl_cache_enabled", "0"); // disabling WSDL cache $server = new SoapServer("http://127.0.0.1/mywsdl.wsdl"); $server->addFunction('getUser'); $server->handle(); ?> and the code for the client: <?php $client = new SoapClient("http://127.0.0.1/index.php?wsdl", array('exceptions' => 0)); try { $result = $client->getUser("username","pass"); print_r($result); } catch (SoapFault $result) { print_r($result); } ?> Here is the ERROR output i am getting on the browser : SoapFault Object ( [message:protected] => Error cannot find parameter [string:Exception:private] => [code:protected] => 0 [file:protected] => C:\xampp\htdocs\client.php [line:protected] => 6 [trace:Exception:private] => Array ( [0] => Array ( [function] => __call [class] => SoapClient [type] => -> [args] => Array ( [0] => getUser [1] => Array ( [0] => username [1] => pass ) ) ) [1] => Array ( [file] => C:\xampp\htdocs\client.php [line] => 6 [function] => getUser [class] => SoapClient [type] => -> [args] => Array ( [0] => username [1] => pass ) ) ) [previous:Exception:private] => [faultstring] => Error cannot find parameter [faultcode] => SOAP-ENV:Client )

Read the article

AngularJS on top of ASP.NET: Moving the MVC framework out to the browser

- by Varun Chatterji

Heavily drawing inspiration from Ruby on Rails, MVC4’s convention over configuration model of development soon became the Holy Grail of .NET web development. The MVC model brought with it the goodness of proper separation of concerns between business logic, data, and the presentation logic. However, the MVC paradigm, was still one in which server side .NET code could be mixed with presentation code. The Razor templating engine, though cleaner than its predecessors, still encouraged and allowed you to mix .NET server side code with presentation logic. Thus, for example, if the developer required a certain <div> tag to be shown if a particular variable ShowDiv was true in the View’s model, the code could look like the following: Fig 1: To show a div or not. Server side .NET code is used in the View Mixing .NET code with HTML in views can soon get very messy. Wouldn’t it be nice if the presentation layer (HTML) could be pure HTML? Also, in the ASP.NET MVC model, some of the business logic invariably resides in the controller. It is tempting to use an antipattern like the one shown above to control whether a div should be shown or not. However, best practice would indicate that the Controller should not be aware of the div. The ShowDiv variable in the model should not exist. A controller should ideally, only be used to do the plumbing of getting the data populated in the model and nothing else. The view (ideally pure HTML) should render the presentation layer based on the model. In this article we will see how Angular JS, a new JavaScript framework by Google can be used effectively to build web applications where: 1. Views are pure HTML 2. Controllers (in the server sense) are pure REST based API calls 3. The presentation layer is loaded as needed from partial HTML only files. What is MVVM? MVVM short for Model View View Model is a new paradigm in web development. In this paradigm, the Model and View stuff exists on the client side through javascript instead of being processed on the server through postbacks. These frameworks are JavaScript frameworks that facilitate the clear separation of the “frontend” or the data rendering logic from the “backend” which is typically just a REST based API that loads and processes data through a resource model. The frameworks are called MVVM as a change to the Model (through javascript) gets reflected in the view immediately i.e. Model > View. Also, a change on the view (through manual input) gets reflected in the model immediately i.e. View > Model. The following figure shows this conceptually (comments are shown in red): Fig 2: Demonstration of MVVM in action In Fig 2, two text boxes are bound to the same variable model.myInt. Thus, changing the view manually (changing one text box through keyboard input) also changes the other textbox in real time demonstrating V > M property of a MVVM framework. Furthermore, clicking the button adds 1 to the value of model.myInt thus changing the model through JavaScript. This immediately updates the view (the value in the two textboxes) thus demonstrating the M > V property of a MVVM framework. Thus we see that the model in a MVVM JavaScript framework can be regarded as “the single source of truth“. This is an important concept. Angular is one such MVVM framework. We shall use it to build a simple app that sends SMS messages to a particular number. Application, Routes, Views, Controllers, Scope and Models Angular can be used in many ways to construct web applications. For this article, we shall only focus on building Single Page Applications (SPAs). Many of the approaches we will follow in this article have alternatives. It is beyond the scope of this article to explain every nuance in detail but we shall try to touch upon the basic concepts and end up with a working application that can be used to send SMS messages using Sent.ly Plus (a service that is itself built using Angular). Before you read on, we would like to urge you to forget what you know about Models, Views, Controllers and Routes in the ASP.NET MVC4 framework. All these words have different meanings in the Angular world. Whenever these words are used in this article, they will refer to Angular concepts and not ASP.NET MVC4 concepts. The following figure shows the skeleton of the root page of an SPA: Fig 3: The skeleton of a SPA The skeleton of the application is based on the Bootstrap starter template which can be found at: http://getbootstrap.com/examples/startertemplate/ Apart from loading the Angular, jQuery and Bootstrap JavaScript libraries, it also loads our custom scripts /app/js/controllers.js /app/js/app.js These scripts define the routes, views and controllers which we shall come to in a moment. Application Notice that the body tag (Fig. 3) has an extra attribute: ngapp=”smsApp” Providing this tag “bootstraps” our single page application. It tells Angular to load a “module” called smsApp. This “module” is defined /app/js/app.js angular.module('smsApp', ['smsApp.controllers', function () {}]) Fig 4: The definition of our application module The line shows above, declares a module called smsApp. It also declares that this module “depends” on another module called “smsApp.controllers”. The smsApp.controllers module will contain all the controllers for our SPA. Routing and Views Notice that in the Navbar (in Fig 3) we have included two hyperlinks to: “#/app” “#/help” This is how Angular handles routing. Since the URLs start with “#”, they are actually just bookmarks (and not server side resources). However, our route definition (in /app/js/app.js) gives these URLs a special meaning within the Angular framework. angular.module('smsApp', ['smsApp.controllers', function () { }]) //Configure the routes .config(['$routeProvider', function ($routeProvider) { $routeProvider.when('/binding', { templateUrl: '/app/partials/bindingexample.html', controller: 'BindingController' }); }]); Fig 5: The definition of a route with an associated partial view and controller As we can see from the previous code sample, we are using the $routeProvider object in the configuration of our smsApp module. Notice how the code “asks for” the $routeProvider object by specifying it as a dependency in the [] braces and then defining a function that accepts it as a parameter. This is known as dependency injection. Please refer to the following link if you want to delve into this topic: http://docs.angularjs.org/guide/di What the above code snippet is doing is that it is telling Angular that when the URL is “#/binding”, then it should load the HTML snippet (“partial view”) found at /app/partials/bindingexample.html. Also, for this URL, Angular should load the controller called “BindingController”. We have also marked the div with the class “container” (in Fig 3) with the ngview attribute. This attribute tells Angular that views (partial HTML pages) defined in the routes will be loaded within this div. You can see that the Angular JavaScript framework, unlike many other frameworks, works purely by extending HTML tags and attributes. It also allows you to extend HTML with your own tags and attributes (through directives) if you so desire, you can find out more about directives at the following URL: http://www.codeproject.com/Articles/607873/ExtendingHTMLwithAngularJSDirectives Controllers and Models We have seen how we define what views and controllers should be loaded for a particular route. Let us now consider how controllers are defined. Our controllers are defined in the file /app/js/controllers.js. The following snippet shows the definition of the “BindingController” which is loaded when we hit the URL http://localhost:port/index.html#/binding (as we have defined in the route earlier as shown in Fig 5). Remember that we had defined that our application module “smsApp” depends on the “smsApp.controllers” module (see Fig 4). The code snippet below shows how the “BindingController” defined in the route shown in Fig 5 is defined in the module smsApp.controllers: angular.module('smsApp.controllers', [function () { }]) .controller('BindingController', ['$scope', function ($scope) { $scope.model = {}; $scope.model.myInt = 6; $scope.addOne = function () { $scope.model.myInt++; } }]); Fig 6: The definition of a controller in the “smsApp.controllers” module. The pieces are falling in place! Remember Fig.2? That was the code of a partial view that was loaded within the container div of the skeleton SPA shown in Fig 3. The route definition shown in Fig 5 also defined that the controller called “BindingController” (shown in Fig 6.) was loaded when we loaded the URL: http://localhost:22544/index.html#/binding The button in Fig 2 was marked with the attribute ngclick=”addOne()” which added 1 to the value of model.myInt. In Fig 6, we can see that this function is actually defined in the “BindingController”. Scope We can see from Fig 6, that in the definition of “BindingController”, we defined a dependency on $scope and then, as usual, defined a function which “asks for” $scope as per the dependency injection pattern. So what is $scope? Any guesses? As you might have guessed a scope is a particular “address space” where variables and functions may be defined. This has a similar meaning to scope in a programming language like C#. Model: The Scope is not the Model It is tempting to assign variables in the scope directly. For example, we could have defined myInt as $scope.myInt = 6 in Fig 6 instead of $scope.model.myInt = 6. The reason why this is a bad idea is that scope in hierarchical in Angular. Thus if we were to define a controller which was defined within the another controller (nested controllers), then the inner controller would inherit the scope of the parent controller. This inheritance would follow JavaScript prototypal inheritance. Let’s say the parent controller defined a variable through $scope.myInt = 6. The child controller would inherit the scope through java prototypical inheritance. This basically means that the child scope has a variable myInt that points to the parent scopes myInt variable. Now if we assigned the value of myInt in the parent, the child scope would be updated with the same value as the child scope’s myInt variable points to the parent scope’s myInt variable. However, if we were to assign the value of the myInt variable in the child scope, then the link of that variable to the parent scope would be broken as the variable myInt in the child scope now points to the value 6 and not to the parent scope’s myInt variable. But, if we defined a variable model in the parent scope, then the child scope will also have a variable model that points to the model variable in the parent scope. Updating the value of $scope.model.myInt in the parent scope would change the model variable in the child scope too as the variable is pointed to the model variable in the parent scope. Now changing the value of $scope.model.myInt in the child scope would ALSO change the value in the parent scope. This is because the model reference in the child scope is pointed to the scope variable in the parent. We did no new assignment to the model variable in the child scope. We only changed an attribute of the model variable. Since the model variable (in the child scope) points to the model variable in the parent scope, we have successfully changed the value of myInt in the parent scope. Thus the value of $scope.model.myInt in the parent scope becomes the “single source of truth“. This is a tricky concept, thus it is considered good practice to NOT use scope inheritance. More info on prototypal inheritance in Angular can be found in the “JavaScript Prototypal Inheritance” section at the following URL: https://github.com/angular/angular.js/wiki/UnderstandingScopes. Building It: An Angular JS application using a .NET Web API Backend Now that we have a perspective on the basic components of an MVVM application built using Angular, let’s build something useful. We will build an application that can be used to send out SMS messages to a given phone number. The following diagram describes the architecture of the application we are going to build: Fig 7: Broad application architecture We are going to add an HTML Partial to our project. This partial will contain the form fields that will accept the phone number and message that needs to be sent as an SMS. It will also display all the messages that have previously been sent. All the executable code that is run on the occurrence of events (button clicks etc.) in the view resides in the controller. The controller interacts with the ASP.NET WebAPI to get a history of SMS messages, add a message etc. through a REST based API. For the purposes of simplicity, we will use an in memory data structure for the purposes of creating this application. Thus, the tasks ahead of us are: Creating the REST WebApi with GET, PUT, POST, DELETE methods. Creating the SmsView.html partial Creating the SmsController controller with methods that are called from the SmsView.html partial Add a new route that loads the controller and the partial. 1. Creating the REST WebAPI This is a simple task that should be quite straightforward to any .NET developer. The following listing shows our ApiController: public class SmsMessage { public string to { get; set; } public string message { get; set; } } public class SmsResource : SmsMessage { public int smsId { get; set; } } public class SmsResourceController : ApiController { public static Dictionary<int, SmsResource> messages = new Dictionary<int, SmsResource>(); public static int currentId = 0; // GET api/<controller> public List<SmsResource> Get() { List<SmsResource> result = new List<SmsResource>(); foreach (int key in messages.Keys) { result.Add(messages[key]); } return result; } // GET api/<controller>/5 public SmsResource Get(int id) { if (messages.ContainsKey(id)) return messages[id]; return null; } // POST api/<controller> public List<SmsResource> Post([FromBody] SmsMessage value) { //Synchronize on messages so we don't have id collisions lock (messages) { SmsResource res = (SmsResource) value; res.smsId = currentId++; messages.Add(res.smsId, res); //SentlyPlusSmsSender.SendMessage(value.to, value.message); return Get(); } } // PUT api/<controller>/5 public List<SmsResource> Put(int id, [FromBody] SmsMessage value) { //Synchronize on messages so we don't have id collisions lock (messages) { if (messages.ContainsKey(id)) { //Update the message messages[id].message = value.message; messages[id].to = value.message; } return Get(); } } // DELETE api/<controller>/5 public List<SmsResource> Delete(int id) { if (messages.ContainsKey(id)) { messages.Remove(id); } return Get(); } } Once this class is defined, we should be able to access the WebAPI by a simple GET request using the browser: http://localhost:port/api/SmsResource Notice the commented line: //SentlyPlusSmsSender.SendMessage The SentlyPlusSmsSender class is defined in the attached solution. We have shown this line as commented as we want to explain the core Angular concepts. If you load the attached solution, this line is uncommented in the source and an actual SMS will be sent! By default, the API returns XML. For consumption of the API in Angular, we would like it to return JSON. To change the default to JSON, we make the following change to WebApiConfig.cs file located in the App_Start folder. public static class WebApiConfig { public static void Register(HttpConfiguration config) { config.Routes.MapHttpRoute( name: "DefaultApi", routeTemplate: "api/{controller}/{id}", defaults: new { id = RouteParameter.Optional } ); var appXmlType = config.Formatters.XmlFormatter. SupportedMediaTypes. FirstOrDefault( t => t.MediaType == "application/xml"); config.Formatters.XmlFormatter.SupportedMediaTypes.Remove(appXmlType); } } We now have our backend REST Api which we can consume from Angular! 2. Creating the SmsView.html partial This simple partial will define two fields: the destination phone number (international format starting with a +) and the message. These fields will be bound to model.phoneNumber and model.message. We will also add a button that we shall hook up to sendMessage() in the controller. A list of all previously sent messages (bound to model.allMessages) will also be displayed below the form input. The following code shows the code for the partial:  <div class="well" style="margin-top: 30px;"> <table style="width: 100%;"> <tr> <td style="width: 45%; text-align: center;"> <input type="text" placeholder="Phone number (eg; +44 7778 609466)" ng-model="model.phoneNumber" class="form-control" style="width: 90%" onkeypress="return checkPhoneInput();" /> </td> <td style="width: 45%; text-align: center;"> <input type="text" placeholder="Message" ng-model="model.message" class="form-control" style="width: 90%" /> </td> <td style="text-align: center;"> <button class="btn btn-danger" ng-click="sendMessage();" ng-disabled="model.isAjaxInProgress" style="marginright: 5px;">Send</button> <img src="/Content/ajax-loader.gif" ng-show="model.isAjaxInProgress" /> </td> </tr> </table> </div>  <div style="margin-top: 30px;">  <div ng-show="model.allMessages.length == 0"> No messages have been sent yet! </div>  <div ng-show="model.allMessages.length == 0"> <table style="width: 100%;" class="table table-striped"> <tr> <td>Phone Number</td> <td>Message</td> <td></td> </tr>  <tr ng-repeat="message in model.allMessages"> <td>{{ message.to }}</td> <td>{{ message.message }}</td> <td> <button class="btn btn-danger" ng-click="delete(message.smsId);" ng-disabled="model.isAjaxInProgress">Delete</button> </td> </tr> </table> </div> </div> The above code is commented and should be self explanatory. Conditional rendering is achieved through using the ng-show=”condition” attribute on various div tags. Input fields are bound to the model and the send button is bound to the sendMessage() function in the controller as through the ngclick=”sendMessage()” attribute defined on the button tag. While AJAX calls are taking place, the controller sets model.isAjaxInProgress to true. Based on this variable, buttons are disabled through the ng-disabled directive which is added as an attribute to the buttons. The ng-repeat directive added as an attribute to the tr tag causes the table row to be rendered multiple times much like an ASP.NET repeater. 3. Creating the SmsController controller The penultimate piece of our application is the controller which responds to events from our view and interacts with our MVC4 REST WebAPI. The following listing shows the code we need to add to /app/js/controllers.js. Note that controller definitions can be chained. Also note that this controller “asks for” the $http service. The $http service is a simple way in Angular to do AJAX. So far we have only encountered modules, controllers, views and directives in Angular. The $http is new entity in Angular called a service. More information on Angular services can be found at the following URL: http://docs.angularjs.org/guide/dev_guide.services.understanding_services. .controller('SmsController', ['$scope', '$http', function ($scope, $http) { //We define the model $scope.model = {}; //We define the allMessages array in the model //that will contain all the messages sent so far $scope.model.allMessages = []; //The error if any $scope.model.errorMessage = undefined; //We initially load data so set the isAjaxInProgress = true; $scope.model.isAjaxInProgress = true; //Load all the messages $http({ url: '/api/smsresource', method: "GET" }). success(function (data, status, headers, config) { this callback will be called asynchronously //when the response is available $scope.model.allMessages = data; //We are done with AJAX loading $scope.model.isAjaxInProgress = false; }). error(function (data, status, headers, config) { //called asynchronously if an error occurs //or server returns response with an error status. $scope.model.errorMessage = "Error occurred status:" + status; //We are done with AJAX loading $scope.model.isAjaxInProgress = false; }); $scope.delete = function (id) { //We are making an ajax call so we set this to true $scope.model.isAjaxInProgress = true; $http({ url: '/api/smsresource/' + id, method: "DELETE" }). success(function (data, status, headers, config) { // this callback will be called asynchronously // when the response is available $scope.model.allMessages = data; //We are done with AJAX loading $scope.model.isAjaxInProgress = false; }); error(function (data, status, headers, config) { // called asynchronously if an error occurs // or server returns response with an error status. $scope.model.errorMessage = "Error occurred status:" + status; //We are done with AJAX loading $scope.model.isAjaxInProgress = false; }); } $scope.sendMessage = function () { $scope.model.errorMessage = undefined; var message = ''; if($scope.model.message != undefined) message = $scope.model.message.trim(); if ($scope.model.phoneNumber == undefined || $scope.model.phoneNumber == '' || $scope.model.phoneNumber.length < 10 || $scope.model.phoneNumber[0] != '+') { $scope.model.errorMessage = "You must enter a valid phone number in international format. Eg: +44 7778 609466"; return; } if (message.length == 0) { $scope.model.errorMessage = "You must specify a message!"; return; } //We are making an ajax call so we set this to true $scope.model.isAjaxInProgress = true; $http({ url: '/api/smsresource', method: "POST", data: { to: $scope.model.phoneNumber, message: $scope.model.message } }). success(function (data, status, headers, config) { // this callback will be called asynchronously // when the response is available $scope.model.allMessages = data; //We are done with AJAX loading $scope.model.isAjaxInProgress = false; }). error(function (data, status, headers, config) { // called asynchronously if an error occurs // or server returns response with an error status. $scope.model.errorMessage = "Error occurred status:" + status // We are done with AJAX loading $scope.model.isAjaxInProgress = false; }); } }]); We can see from the previous listing how the functions that are called from the view are defined in the controller. It should also be evident how easy it is to make AJAX calls to consume our MVC4 REST WebAPI. Now we are left with the final piece. We need to define a route that associates a particular path with the view we have defined and the controller we have defined. 4. Add a new route that loads the controller and the partial This is the easiest part of the puzzle. We simply define another route in the /app/js/app.js file: $routeProvider.when('/sms', { templateUrl: '/app/partials/smsview.html', controller: 'SmsController' }); Conclusion In this article we have seen how much of the server side functionality in the MVC4 framework can be moved to the browser thus delivering a snappy and fast user interface. We have seen how we can build client side HTML only views that avoid the messy syntax offered by server side Razor views. We have built a functioning app from the ground up. The significant advantage of this approach to building web apps is that the front end can be completely platform independent. Even though we used ASP.NET to create our REST API, we could just easily have used any other language such as Node.js, Ruby etc without changing a single line of our front end code. Angular is a rich framework and we have only touched on basic functionality required to create a SPA. For readers who wish to delve further into the Angular framework, we would recommend the following URL as a starting point: http://docs.angularjs.org/misc/started. To get started with the code for this project: Sign up for an account at http://plus.sent.ly (free) Add your phone number Go to the “My Identies Page” Note Down your Sender ID, Consumer Key and Consumer Secret Download the code for this article at: https://docs.google.com/file/d/0BzjEWqSE31yoZjZlV0d0R2Y3eW8/edit?usp=sharing Change the values of Sender Id, Consumer Key and Consumer Secret in the web.config file Run the project through Visual Studio!

Read the article

Sharepoint web services -- The HTTP request is unauthorized with client authentication scheme 'Ntlm'

- by Pandincus

I know there's a lot of questions on SO similar to this, but I couldn't find one for this particular issue. A couple of points, first: I have no control over our Sharepoint server. I cannot tweak any IIS settings. I believe our IIS server version is IIS 7.0. Our Sharepoint Server is anticipating requests via NTLM. Our Sharepoint Server is on the same domain as my client computer. I am using .NET Framework 3.5, Visual Studio 2008 I am trying to write a simple console app to manipulate Sharepoint data using Sharepoint Web Services. I have added the Service Reference, and the following is my app.config: <system.serviceModel> <bindings> <basicHttpBinding> <binding name="ListsSoap" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" allowCookies="false" bypassProxyOnLocal="false" hostNameComparisonMode="StrongWildcard" maxBufferSize="65536" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" transferMode="Buffered" useDefaultWebProxy="true"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <security mode="Transport"> <transport clientCredentialType="Ntlm" proxyCredentialType="Ntlm" /> </security> </binding> </basicHttpBinding> </bindings> <client> <endpoint address="https://subdomain.companysite.com/subsite/_vti_bin/Lists.asmx" binding="basicHttpBinding" bindingConfiguration="ListsSoap" contract="ServiceReference1.ListsSoap" name="ListsSoap" /> </client> </system.serviceModel> This is my code: static void Main(string[] args) { using (var client = new ListsSoapClient()) { client.ClientCredentials.Windows.ClientCredential = new NetworkCredential("username", "password", "domain"); client.GetListCollection(); } } When I call GetListCollection(), the following MessageSecurityException gets thrown: The HTTP request is unauthorized with client authentication scheme 'Ntlm'. The authentication header received from the server was 'NTLM'. With an inner WebException: "The remote server returned an error: (401) Unauthorized." I've tried various bindings and various code tweaks to try to authenticate properly, but to no avail. I'll list those below. I've tried the following steps: Using a native Win32 Impersonator before creating the client using (new Impersonator.Impersonator("username", "password", "domain")) using (var client = new ListsSoapClient()) { client.ClientCredentials.Windows.ClientCredential = new NetworkCredential("dpincas", "password", "domain"); client.GetListCollection(); } This produced the same error message. Setting TokenImpersonationLevel for my client credentials using (var client = new ListsSoapClient()) { client.ClientCredentials.Windows.AllowedImpersonationLevel = TokenImpersonationLevel.Impersonation; client.GetListCollection(); } This produced the same error message. Using security mode=TransportCredentialOnly <security mode="TransportCredentialOnly"> <transport clientCredentialType="Ntlm" /> </security> This resulted in a different error message: The provided URI scheme 'https' is invalid; expected 'http'. Parameter name: via However, I need to use https, so I cannot change my URI scheme. I've tried some other combinations that I can't remember, but I'll post them when I do. I'm really at wits end here. I see a lot of links on Google that say "switch to Kerberos", but my server seems to only be accepting NTLM, not "Negotiate" (as it would say if it was looking for Kerberos), so that is unfortunately not an option. Any help out there, folks?

Read the article

C# XmlSchemaSet - Resolving included schemas to enumerate attribute groups

- by satixx

Hi, I currently have a compiled XmlSchemaSet from which I get possible elements/attributes for each specific "parent" element defined in the schema. I have a single "master" xsd schema which includes another schema and uses attributeGroup references for some "common" elements. Here is a sample: (MasterSchema.xsd) <?xml version="1.0" encoding="utf-8"?> <xs:schema id="MasterSchema" xmlns:xs="http://www.w3.org/2001/XMLSchema" targetNamespace="CommonNamespace.xsd" xmlns="CommonNamespace.xsd" xmlns:mstns="CommonNamespace.xsd" elementFormDefault="qualified" > <xs:include schemaLocation="SourceAttributeGroups.xsd"/> <xs:element name="Binding" minOccurs="0" maxOccurs="2"> <xs:complexType> <xs:attribute name="Name" type="xs:string"/> <xs:attributeGroup ref="BindingSourceAttributeGroup"/> </xs:complexType> </xs:element> </xs:schema> (SourceAttributeGroups.xsd) <?xml version="1.0" encoding="utf-8"?> <xs:schema id="SourceAttributeGroups" xmlns:xs="http://www.w3.org/2001/XMLSchema" targetNamespace="CommonNamespace.xsd" xmlns="CommonNamespace.xsd" xmlns:mstns="CommonNamespace.xsd" elementFormDefault="qualified" > <xs:attributeGroup id="BindingSourceAttributeGroup" name="BindingSourceAttributeGroup"> <xs:attribute name="Source"> <xs:simpleType> <xs:restriction base="xs:string"> <xs:enumeration value="Data"/> </xs:restriction> </xs:simpleType> </xs:attribute>  <xs:attribute name="Value" type="xs:string"/>  <xs:attribute name="Label" type="xs:string"/> </attributeGroup> </xs:schema> I would like to create an XmlSchemaSet in C# which would resolve, compile and "merge" every references of the MasterSchema so it would finaly look like this: (MasterSchema.xsd) <?xml version="1.0" encoding="utf-8"?> <xs:schema id="MasterSchema" xmlns:xs="http://www.w3.org/2001/XMLSchema" targetNamespace="CommonNamespace.xsd" xmlns="CommonNamespace.xsd" xmlns:mstns="CommonNamespace.xsd" elementFormDefault="qualified" > <xs:include schemaLocation="SourceAttributeGroups.xsd"/> <xs:element name="Binding" minOccurs="0" maxOccurs="2"> <xs:complexType> <xs:attribute name="Name" type="xs:string"/> <xs:attribute name="Source"> <xs:simpleType> <xs:restriction base="xs:string"> <xs:enumeration value="Data"/> </xs:restriction> </xs:simpleType> </xs:attribute>  <xs:attribute name="Value" type="xs:string"/>  <xs:attribute name="Label" type="xs:string"/> </xs:complexType> </xs:element> </xs:schema> This way, I could traverse each XmlSchemaParticle of the compiled schema to get every single attribute for a specific element, even when its attributes are defined in an external schema. At the moment, when I get the possible attributes for a "Binding" element, I only get the "Name" attribute since it is originally defined in the "master" schema. What would be the possible solutions to this problem? Thanks! Satixx

Read the article

How to fix an endpoint/configuration error using WCF in VB.NET

- by Eric

I'm working with a small web page that is meant to assist the users of my application. This web page takes a file and sends it to a central server, which then does something with the data and returns a result. I created this application some time ago and am coming back to it recently. I am getting some kind of configuration error right now, although this application used to work. When it stopped working, whenever I ran the page and sent the data to the central server, I would get this error: "Could not find default endpoint element that references contract 'CentralService.ICwCentralService' in the ServiceModel client configuration section. This might be because no configuration file was found for your application, or because no endpoint element matching this contract could be found in the client element." Looking at some other issues on the net, I thought I might have had the answer. The service reference to the endpoint was contained in a separate project from the code that called it, but the configuration file in that project had no information about the endpoint. So, I added these entries to the web.config file in the main project: <system.serviceModel> <bindings> <wsHttpBinding> <binding name="wsHttpEndpoint" closeTimeout="00:01:00" openTimeout="00:0:10" receiveTimeout="01:10:00" sendTimeout="01:01:00" bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="999999999" maxReceivedMessageSize="999999999" messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true" allowCookies="false"> <readerQuotas maxDepth="999999999" maxStringContentLength="999999999" maxArrayLength="999999999" maxBytesPerRead="999999999" maxNameTableCharCount="999999999" /> <reliableSession ordered="true" inactivityTimeout="01:10:00" enabled="false" /> <security mode="Message"> <transport clientCredentialType="Windows" proxyCredentialType="None" realm="" /> <message clientCredentialType="Windows" negotiateServiceCredential="true" algorithmSuite="Default" establishSecurityContext="true" /> </security> </binding> </wsHttpBinding> </bindings> <client> <endpoint address="http://localhost:22269/CwCentralService.svc" binding="wsHttpBinding" bindingConfiguration="wsHttpEndpoint" contract="CentralService.ICwCentralService" name="wsHttpEndpoint"> <identity> <servicePrincipalName /> </identity> </endpoint> </client> </system.serviceModel> Now, if I run it, I'm still getting an error: "The remote server returned an unexpected response: (400) Bad Request." The strange thing is, though, I took those entries from another project that contacts the central server. That application has no problems contacting the central server using these settings. It's not a web page application, but I don't see how that would require these settings to change. I cannot tell what started causing these errors or when. I assume its something that changed outside of the application (e.g. the libraries referenced) that requires an update to the configuration in the application. I am currently using .NET 3.0 for all of my applications. Any help would be appreciated.

Read the article

How do you pass user credentials from WebClient to a WCF REST service?

- by Alex

I am trying to expose a WCT REST service and only users with valid username and password would be able to access it. The username and password are stored in a SQL database. Here is the service contract: public interface IDataService { [OperationContract] [WebGet(ResponseFormat = WebMessageFormat.Json)] byte[] GetData(double startTime, double endTime); } Here is the WCF configuration: <bindings> <webHttpBinding> <binding name="SecureBinding"> <security mode="Transport"> <transport clientCredentialType="Basic"/> </security> </binding> </webHttpBinding> </bindings> <behaviors> <serviceBehaviors> <behavior name="DataServiceBehavior"> <serviceMetadata httpGetEnabled="true"/> <serviceCredentials> <userNameAuthentication userNamePasswordValidationMode="Custom" customUserNamePasswordValidatorType= "CustomValidator, WCFHost" /> </serviceCredentials> </behavior> </serviceBehaviors> </behaviors> <services> <service behaviorConfiguration="DataServiceBehavior" name="DataService"> <endpoint address="" binding="webHttpBinding" bindingConfiguration="SecureBinding" contract="IDataService" /> </service> </services> I am accessing the service via the WebClient class within a Silverlight application. However, I have not been able to figure out how to pass the user credentials to the service. I tried various values for client.Credentials but none of them seems to trigger the code in my custom validator. I am getting the following error: The underlying connection was closed: An unexpected error occurred on a send. Here is some sample code I have tried: WebClient client = new WebClient(); client.Credentials = new NetworkCredential("name", "password", "domain"); client.OpenReadCompleted += new OpenReadCompletedEventHandler(GetData); client.OpenReadAsync(new Uri(uriString)); If I set the security mode to None, the whole thing works. I also tried other clientCredentialType values and none of them worked. I also self-hosted the WCF service to eliminate the issues related to IIS trying to authenticate a user before the service gets a chance. Any comment on what the underlying issues may be would be much appreciated. Thanks. Update: Thanks to Mehmet's excellent suggestions. Here is the tracing configuration I had: <system.diagnostics> <sources> <source name="System.ServiceModel" switchValue="Information, ActivityTracing" propagateActivity="true"> <listeners> <add name="xml" /> </listeners> </source> <source name="System.IdentityModel" switchValue="Information, ActivityTracing" propagateActivity="true"> <listeners> <add name="xml" /> </listeners> </source> </sources> <sharedListeners> <add name="xml" type="System.Diagnostics.XmlWriterTraceListener" initializeData="c:\Traces.svclog" /> </sharedListeners> </system.diagnostics> But I did not see any message coming from my Silverlight client. As for https vs http, I used https as follows: string baseAddress = "https://localhost:6600/"; _webServiceHost = new WebServiceHost(typeof(DataServices), new Uri(baseAddress)); _webServiceHost.Open(); However, I did not configure any SSL certificate. Is this the problem?

Read the article

Enable button based on TextBox value (WPF)

- by zendar

This is MVVM application. There is a window and related view model class. There is TextBox, Button and ListBox on form. Button is bound to DelegateCommand that has CanExecute function. Idea is that user enters some data in text box, presses button and data is appended to list box. I would like to enable command (and button) when user enters correct data in TextBox. Things work like this now: CanExecute() method contains code that checks if data in property bound to text box is correct. Text box is bound to property in view model UpdateSourceTrigger is set to PropertyChanged and property in view model is updated after each key user presses. Problem is that CanExecute() does not fire when user enters data in text box. It doesn't fire even when text box lose focus. How could I make this work? Edit: Re Yanko's comment: Delegate command is implemented in MVVM toolkit template and when you create new MVVM project, there is Delegate command in solution. As much as I saw in Prism videos this should be the same class (or at least very similar). Here is XAML snippet: ... <UserControl.Resources> <views:CommandReference x:Key="AddObjectCommandReference" Command="{Binding AddObjectCommand}" /> </UserControl.Resources> ... <TextBox Text="{Binding ObjectName, UpdateSourceTrigger=PropertyChanged}"> </TextBox> <Button Command="{StaticResource AddObjectCommandReference}">Add</Button> ... View model: // Property bound to textbox public string ObjectName { get { return objectName; } set { objectName = value; OnPropertyChanged("ObjectName"); } } // Command bound to button public ICommand AddObjectCommand { get { if (addObjectCommand == null) { addObjectCommand = new DelegateCommand(AddObject, CanAddObject); } return addObjectCommand; } } private void AddObject() { if (ObjectName == null || ObjectName.Length == 0) return; objectNames.AddSourceFile(ObjectName); OnPropertyChanged("ObjectNames"); // refresh listbox } private bool CanAddObject() { return ObjectName != null && ObjectName.Length > 0; } As I wrote in the first part of question, following things work: property setter for ObjectName is triggered on every keypress in textbox if I put return true; in CanAddObject(), command is active (button to) It looks to me that binding is correct. Thing that I don't know is how to make CanExecute() fire in setter of ObjectName property from above code. Re Ben's and Abe's answers: CanExecuteChanged() is event handler and compiler complains: The event 'System.Windows.Input.ICommand.CanExecuteChanged' can only appear on the left hand side of += or -= there are only two more members of ICommand: Execute() and CanExecute() Do you have some example that shows how can I make command call CanExecute(). I found command manager helper class in DelegateCommand.cs and I'll look into it, maybe there is some mechanism that could help. Anyway, idea that in order to activate command based on user input, one needs to "nudge" command object in property setter code looks clumsy. It will introduce dependencies and one of big points of MVVM is reducing them. Is it possible to solve this problem by using dependency properties?

Read the article

Ejb 2.0 deployment issues on Jboss 5.1

- by Ravi

I am deploying an ear application on Jboss 5.1.0. and i facing some issues. I had two ears one i had copied to deploy folder and the other in deploy-hasingleton. The ear which is in deploy-hasingleton is throwing some errors.when i serached in google i came to know that there is some issue with EJB 2.x on jboss 5.1.i was not able to find the solution. Below is the log. profileservice-secured.jar 11:16:17,162 INFO [JBossASKernel] installing bean: jboss.j2ee:jar=profileservice-secured.jar,name=SecureManagementView,service=EJB3 11:16:17,162 INFO [JBossASKernel] with dependencies: 11:16:17,162 INFO [JBossASKernel] and demands: 11:16:17,162 INFO [JBossASKernel] jboss.ejb:service=EJBTimerService 11:16:17,162 INFO [JBossASKernel] and supplies: 11:16:17,162 INFO [JBossASKernel] jndi:SecureManagementView/remote-org.jboss.deployers.spi.management.ManagementView 11:16:17,162 INFO [JBossASKernel] Class:org.jboss.deployers.spi.management.ManagementView 11:16:17,162 INFO [JBossASKernel] jndi:SecureManagementView/remote 11:16:17,162 INFO [JBossASKernel] Added bean(jboss.j2ee:jar=profileservice-secured.jar,name=SecureManagementView,service=EJB3) to KernelDeployment of: profileservice-secured.jar 11:16:17,162 INFO [EJB3EndpointDeployer] Deploy AbstractBeanMetaData@17cabbb{name=jboss.j2ee:jar=profileservice-secured.jar,name=SecureProfileService,service=EJB3_endpoint bean=org.jboss.ejb3.endpoint.deployers.impl.EndpointImpl properties=[container] constructor=null autowireCandidate=true} 11:16:17,162 INFO [EJB3EndpointDeployer] Deploy AbstractBeanMetaData@1fedd5c{name=jboss.j2ee:jar=profileservice-secured.jar,name=SecureDeploymentManager,service=EJB3_endpoint bean=org.jboss.ejb3.endpoint.deployers.impl.EndpointImpl properties=[container] constructor=null autowireCandidate=true} 11:16:17,162 INFO [EJB3EndpointDeployer] Deploy AbstractBeanMetaData@1ef4b31{name=jboss.j2ee:jar=profileservice-secured.jar,name=SecureManagementView,service=EJB3_endpoint bean=org.jboss.ejb3.endpoint.deployers.impl.EndpointImpl properties=[container] constructor=null autowireCandidate=true} 11:16:17,833 INFO [SessionSpecContainer] Starting jboss.j2ee:jar=profileservice-secured.jar,name=SecureDeploymentManager,service=EJB3 11:16:17,833 INFO [EJBContainer] STARTED EJB: org.jboss.profileservice.ejb.SecureDeploymentManager ejbName: SecureDeploymentManager 11:16:18,066 INFO [JndiSessionRegistrarBase] Binding the following Entries in Global JNDI: SecureDeploymentManager/remote - EJB3.x Default Remote Business Interface SecureDeploymentManager/remote-org.jboss.deployers.spi.management.deploy.DeploymentManager - EJB3.x Remote Business Interface 11:16:18,129 INFO [SessionSpecContainer] Starting jboss.j2ee:jar=profileservice-secured.jar,name=SecureManagementView,service=EJB3 11:16:18,129 INFO [EJBContainer] STARTED EJB: org.jboss.profileservice.ejb.SecureManagementView ejbName: SecureManagementView 11:16:18,160 INFO [JndiSessionRegistrarBase] Binding the following Entries in Global JNDI: SecureManagementView/remote - EJB3.x Default Remote Business Interface SecureManagementView/remote-org.jboss.deployers.spi.management.ManagementView - EJB3.x Remote Business Interface 11:16:18,206 INFO [SessionSpecContainer] Starting jboss.j2ee:jar=profileservice-secured.jar,name=SecureProfileService,service=EJB3 11:16:18,206 INFO [EJBContainer] STARTED EJB: org.jboss.profileservice.ejb.SecureProfileServiceBean ejbName: SecureProfileService 11:16:18,238 INFO [JndiSessionRegistrarBase] Binding the following Entries in Global JNDI: SecureProfileService/remote - EJB3.x Default Remote Business Interface SecureProfileService/remote-org.jboss.profileservice.spi.ProfileService - EJB3.x Remote Business Interface 11:16:18,534 INFO [TomcatDeployment] deploy, ctxPath=/admin-console 11:16:18,612 INFO [config] Initializing Mojarra (1.2_12-b01-FCS) for context '/admin-console' 11:16:21,759 INFO [TomcatDeployment] deploy, ctxPath=/ 11:16:21,853 INFO [TomcatDeployment] deploy, ctxPath=/jmx-console 11:16:21,993 INFO [JBossASKernel] Created KernelDeployment for: hapi-0.5.jar 11:16:21,993 INFO [JBossASKernel] installing bean: jboss.j2ee:ear=jca-ear-1.3-SNAPSHOT.ear,jar=hapi-0.5.jar,name=hapi-0.5,service=EJB3 11:16:21,993 INFO [JBossASKernel] with dependencies: 11:16:21,993 INFO [JBossASKernel] and demands: 11:16:21,993 INFO [JBossASKernel] and supplies: 11:16:21,993 INFO [JBossASKernel] Added bean(jboss.j2ee:ear=jca-ear-1.3-SNAPSHOT.ear,jar=hapi-0.5.jar,name=hapi-0.5,service=EJB3) to KernelDeployment of: hapi-0.5.jar 11:16:23,302 INFO [ClientENCInjectionContainer] STARTED CLIENT ENC CONTAINER: hapi-0.5 11:16:23,473 INFO [SystemEventService] NODE_STARTED on node [HCA-5C1P1BS] 11:16:23,489 INFO [AbstractConnector] [aware] connector started 11:16:23,536 INFO [AbstractConnector] [datacaptor] connector started 11:16:23,536 INFO [AbstractConnector] [intellivue] connector started 11:16:23,972 ERROR [ProfileServiceBootstrap] Failed to load profile: Summary of incomplete deployments (SEE PREVIOUS ERRORS FOR DETAILS): DEPLOYMENTS MISSING DEPENDENCIES: Deployment "gehc.com:service=KernelServiceMBean" is missing the following dependencies: Dependency "jboss.j2ee:module=kernel-ejb-1.3-SNAPSHOT.jar,service=EjbModule" (should be in state "Create", but is actually in state " NOT FOUND Depends on 'jboss.j2ee:module=kernel-ejb-1.3-SNAPSHOT.jar,service=EjbModule' ") Deployment "jboss.j2ee:module="kernel-ejb-1.3-SNAPSHOT.jar",service=EjbModule" is missing the following dependencies: Dependency "gehc.com:service=KernelServiceMBean" (should be in state "Create", but is actually in state "Configured") DEPLOYMENTS IN ERROR: Deployment "jboss.j2ee:module=kernel-ejb-1.3-SNAPSHOT.jar,service=EjbModule" is in error due to the following reason(s): ** NOT FOUND Depends on 'jboss.j2ee:module=kernel-ejb-1.3-SNAPSHOT.jar,service=EjbModule' ** 11:16:24,003 INFO [Http11Protocol] Starting Coyote HTTP/1.1 on http-127.0.0.1-8080 11:16:24,034 INFO [AjpProtocol] Starting Coyote AJP/1.3 on ajp-127.0.0.1-8009 11:16:24,050 INFO [ServerImpl] JBoss (Microcontainer) [5.1.0.GA (build: SVNTag=JBoss_5_1_0_GA date=200905221053)] Started in 1m:49s:575ms I had marked the error with bold, there is some circular dependency also. Thanks Ravi S

Read the article

How do I use Sketchflow sample data for a ListBoxItem Template at design time?

- by Boris Nikolaevich

I am using Expression Blend 4 and Visual Studio 2010 to create a Sketchflow prototype. I have a Sample Data collection and a ListBox that is bound to it. This displays as I would expect both at design time and at run time. However, the ListBoxItem template it just complex enough that I wanted to pull it out into its own XAML file. Even though the items still render as expected in the main ListBox where the template is used, when I open the template itself, all of the databound controls are empty. If I add a DataContext to the template, I can see and work with the populated objects while in the template, but then that local DataContext overrides the DataContext set on the listbox. A bit of code will illustrate. Start by creating a Sketchflow project (I am using Silverlight, but it should work the same for WPF), then add a project data source called SampleDataSource. Add a collection called ListData, with a single String property called Title. Here is the (scaled down) code for the main Sketchflow screen, which we'll call Main.xaml: <UserControl xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:local="clr-namespace:DemoScreens" mc:Ignorable="d" x:Class="DemoScreens.Main" Width="800" Height="600"> <UserControl.Resources> <ResourceDictionary> <ResourceDictionary.MergedDictionaries> <ResourceDictionary Source="ProjectDataSources.xaml"/> </ResourceDictionary.MergedDictionaries> <DataTemplate x:Key="ListBoxItemTemplate"> <local:DemoListBoxItemTemplate d:IsPrototypingComposition="True" Margin="0,0,5,0" Width="748"/> </DataTemplate> </ResourceDictionary> </UserControl.Resources> <Grid x:Name="LayoutRoot" Background="#5c87b2" DataContext="{Binding Source={StaticResource SampleDataSource}}"> <ListBox Background="White" x:Name="DemoList" Style="{StaticResource ListBox-Sketch}" Margin="20,100,20,20" ItemTemplate="{StaticResource ListBoxItemTemplate}" ItemsSource="{Binding ListData}" ScrollViewer.HorizontalScrollBarVisibility="Disabled"/> </Grid> </UserControl> You can see that it references the DemoListBoxItemTemplate, which is defined in its own DemoListBoxItemTemplate.xaml: <UserControl xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:local="clr-namespace:DemoScreens" mc:Ignorable="d" x:Class="DemoScreens.DemoListBoxItemTemplate"> <Grid x:Name="LayoutRoot"> <TextBlock Text="{Binding Title}" Style="{StaticResource BasicTextBlock-Sketch}" Width="150"/> </Grid> </UserControl> Obviously, this is way simpler than my actual listbox, but it should be enough to illustrate my problem. When you open Main.xaml in the Expression designer, the list box is populated with sample data. But when you open DemoListBoxItemTemplate.xaml, there is no data context and therefore no data to display—which makes it more difficult to identify controls visually. How can I have sample data displayed when I am working with the template, while still allowing the larger set of sample data to be used for the ListBox itself?

Read the article

WPF Navigation Page Breadcrumb

- by Ryan

I found code to use a breadcrumb instead of the navigation buttons for my pages. This code works perfect with setting a page as the startup. My problem is that I need to have a window with a frame control as the startup and this is causing the breadcrumb to not show at all. I seem to be missing something with my styling. The types used to be NavigationWindow but I changed them to Frame to try and get a working solution. <Style TargetType="Frame" x:Key="{x:Type Frame}"> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="Frame"> <Grid Background="Transparent"> <Grid.RowDefinitions> <RowDefinition Height="50"/> <RowDefinition Height="50"/> <RowDefinition Height="*"/> </Grid.RowDefinitions> <ItemsControl ItemsSource="{Binding RelativeSource={RelativeSource AncestorType={x:Type Frame}}, Path=BackStack}">  <ItemsControl.ItemsPanel> <ItemsPanelTemplate> <local:InverseWrapPanel KeyboardNavigation.TabNavigation="Cycle" KeyboardNavigation.DirectionalNavigation="Cycle"/> </ItemsPanelTemplate> </ItemsControl.ItemsPanel> <ItemsControl.ItemTemplate> <DataTemplate> <Button Command="NavigationCommands.NavigateJournal" CommandParameter="{Binding RelativeSource={RelativeSource Self}}" Content="{Binding Name}"> <Button.Template> <ControlTemplate TargetType="Button"> <WrapPanel> <TextBlock Name="text1" FontWeight="Bold" Text="{TemplateBinding Content}"/> <TextBlock Name="text2" FontWeight="Bold" Text=">>" Margin="2,0,0,0"/> </WrapPanel> <ControlTemplate.Triggers> <Trigger Property="IsMouseOver" Value="True"> <Setter TargetName="text1" Property="Foreground" Value="Blue"/> <Setter TargetName="text2" Property="Foreground" Value="Blue"/> </Trigger> </ControlTemplate.Triggers> </ControlTemplate> </Button.Template> </Button> </DataTemplate> </ItemsControl.ItemTemplate> </ItemsControl> <AdornerDecorator Grid.Row="2"> <ContentPresenter Name="PART_NavWinCP" ClipToBounds="true"/> </AdornerDecorator> </Grid> </ControlTemplate> </Setter.Value> </Setter> </Style>

Search Results

Search found 4490 results on 180 pages for 'binding'.

Page 103/180 | < Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110 | Next Page >

- by chris_l

- by Andy Arismendi

- by sunil221

- by sunil221

- by justjoshingyou

- by Andras Zoltan

- by music2myear

- by Pieter Breed

- by Eric

- by Jmyster

- by majid4466

- by majid4466

- by TheAggie

- by mr.b

- by WarDoGG

- by Varun Chatterji

- by Pandincus

- by satixx

- by Eric

- by Alex

- by zendar

- by Ravi

- by Boris Nikolaevich

- by Ryan

< Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110 | Next Page >