Search Results

Search found 92226 results on 3690 pages for 'file access'.

Page 103/3690 | < Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >

  • Can't access my accelerated hard disk from msdos after installing linux on ssd cache

    - by Chibueze Opata
    I mistakenly installed Ubuntu on my ssd (forgot my PC actually came with one), when it detected a ~31GiB disk that it wanted to install to, I was a bit confused since I had brought out 30Gb in my primary disk for it, but I clicked continue. After installation, I tried to boot back into my Windows and it brought out some Intel Raid Disk Utility stuff saying I should disable acceleration on a disk something couldn't be found, I canceled it but whatever I tried, recovery tools, setups etc, I couldn't just access the drive which was apparently using the SSD as cache. Since then I've been stuck. I tried setting the 'raid' flag to the disk from 'gParted', still I couldn't. I tried the diskraid utility from windows recover disk, it said it couldn't detect any raid, diskpart sees the partition but doesn't see the volume, when I remove the raid flag, it sees the volume as one of raw type, and I can't access anything. I can however mount the drive from terminal in Ubuntu and access my files, but I don't have any backup media at the moment so I can do a factory re-install. Please how do I go about solving the issue, precisely I would like to know how to boot into the drive again. Thanks!

    Read the article

  • django & postgres linux hosting (with SSH access) recommendations

    - by Justin Grant
    We're looking for a good place to host our custom Django app (a fork of OSQA) and its postgresql backend. Requirements include: Linux Python 2.6 or (ideally) Python 2.7 Django 1.2 Postgres 8.4 or later DB backup/restore handled by the hoster, not us OS & dev-platform-stack patching/maintenance handled by the hoster, not us SSH access (so we can pull source code from GitHub, so we can install python eggs, etc.) ability to set up cron jobs (e.g. to send out dail email updates) ability to send up to 10K emails/day good performance (not ganged up with a zillion other sites on one CPU, not starved for RAM) FTP or SCP access to web logs dedicated public IP SSL support Costs under $1000/month for a relatively small site (<5M pageviews/month) Good customer service We already have a prototype site running on EC2 on top of a Bitnami DjangoStack. The problem is that we have to patch the OS, patch postgres, etc. We'd really prefer a platform-as-a-service (PaaS) offering, like Heroku offers for Rails apps, where all we need to worry about is deploying our code instead of worrying about system software patching and maintenance. Google App Engine is closest to what we're looking for, but they don't offer relational DB access (not yet at least). Anyone have a recommendation?

    Read the article

  • Access functions from user control without events?

    - by BornToCode
    I have an application made with usercontrols and a function on main form that removes the previous user controls and shows the desired usercontrol centered and tweaked: public void DisplayControl(UserControl uControl) I find it much easier to make this function static or access this function by reference from the user control, like this: MainForm mainform_functions = (MainForm)Parent; mainform_functions.DisplayControl(uc_a); You probably think it's a sin to access a function in mainform, from the usercontrol, however, raising an event seems much more complex in such case - I'll give a simple example - let's say I raise an event from usercontrol_A to show usercontrol_B on mainform, so I write this: uc_a.show_uc_b+= (s,e) => { usercontrol_B uc_b = new usercontrol_B(); DisplayControl(uc_b); }; Now what if I want usercontrol_B to also have an event to show usercontrol_C? now it would look like this: uc_a.show_uc_b+= (s,e) => { usercontrol_B uc_b = new usercontrol_B(); DisplayControl(uc_b); uc_b.show_uc_c += (s2,e2) => {usercontrol_C uc_c = new usercontrol_C(); DisplayControl(uc_c);} }; THIS LOOKS AWFUL! The code is much simpler and readable when you actually access the function from the usercontrol itself, therefore I came to the conclusion that in such case it's not so terrible if I break the rules and not use events for such general function, I also think that a readable usercontrol that you need to make small adjustments for another app is preferable than a 100% 'generic' one which makes my code look like a pile of mud. What is your opinion? Am I mistaken?

    Read the article

  • System in low graphics, deleted linux, grub rescue, can't access windows

    - by First timer
    So I'm pretty new to Ubuntu but I managed to install it with no big problems on both my desktop and netbook. When I installed it on my brother's netbook everything went horribly wrong and now I fear the system is close to beyond repair. The problem was first that it said it did not have any space left (seemed ridiculous since it had a lot). Then Ubuntu began booting into a "System is running in low graphics mode error" which I then tried to fix, using all the tips I could find in here but nothing helped. I think the graphics error and lack of space might have been related but I can't be sure. Finally I gave up repairing Ubuntu and went for a reinstall. Shouldn't have done that! I read that I should simply open Ubuntu through a live usb and choose GParted to delete the Linux partitions so I did and rebooted accordingly. Next, I was to install Ubuntu but now I am only given the option to wipe the whole disk for Ubuntu, not install along with windows 7. If I access GParted I can still see the ntfs partitions that hold windows 7 (there are 2: one labeled RECOVERY and another labeled OS and boot) so why can't I access them? Btw. the OS and boot has a little red mark with a warning that 1 cluster is referenced to multiple times, don't know what that means. If I boot without the live usb I am sent directly into a grub rescue "black screen of the computer will follow no orders". Please, I know that the easiest might be to simply wipe the whole thing clean but there are important files and programs on windows 7. Is there a way to just access windows? It is a dell inspiron 1018 mini netbook, so I have no cd input and no windows 7 installation cd.

    Read the article

  • Remote Access to Owncloud Server

    - by John
    I'm currently trying to setup my own own-cloud server, and I've got it fully installed, configured, and accessible from within my own local network. I cannot figure out how to access it from the outside. So far I've: Successfully setup port-forwarding on my local router. I've done so via 'single port forwarding' and 'port range forwarding' Ports 80, 443, 3306 (Apache-Full and MySQL) Successfully obtained my external IP address. I've also tested this magic number from within the network at #insertIPhere/owncloud and it did work. Successfully setup the server using SQLite Successfully setup the server using MySQL Created the following exceptions in my firewall: Allow In Port 80 (Apache Full) Allow In Port 443 (Apache Full) Allow In Port 3306 (MySQL) Tried connecting from several different remote networks, as to troubleshoot something on their end As far as trying to access it, I'm doing so through Google-Chrome and Mozilla Firefox trying to reach the server through #insertIPhere/owncloud using the above public IP address. So what have I missed, and how do I access my server from outside? Thanks in advance for your help and time, and I apologize in advance for what will probably result in my noobish mistake in networking. I've looked at the official documentation. And also this question here.

    Read the article

  • Why does File::Slurp return a scalar when it should return a list?

    - by BrianH
    I am new to the File::Slurp module, and on my first test with it, it was not giving the results I was expecting. It took me a while to figure it out, so now I am interested in why I was seeing this certain behavior. My call to File::Slurp looked like this: my @array = read_file( $file ) || die "Cannot read $file\n"; I included the "die" part because I am used to doing that when opening files. My @array would always end up with the entire contents of the file in the first element of the array. Finally I took out the "|| die" section, and it started working as I expected. Here is an example to illustrate: perl -de0 Loading DB routines from perl5db.pl version 1.22 Editor support available. Enter h or `h h' for help, or `man perldebug' for more help. main::(-e:1): 0 DB<1> use File::Slurp DB<2> $file = '/usr/java6_64/copyright' DB<3> x @array1 = read_file( $file ) 0 'Licensed material - Property of IBM.' 1 'IBM(R) SDK, Java(TM) Technology Edition, Version 6' 2 'IBM(R) Runtime Environment, Java(TM) Technology Edition, Version 6' 3 '' 4 'Copyright Sun Microsystems Inc, 1992, 2008. All rights reserved.' 5 'Copyright IBM Corporation, 1998, 2009. All rights reserved.' 6 '' 7 'The Apache Software License, Version 1.1 and Version 2.0' 8 'Copyright 1999-2007 The Apache Software Foundation. All rights reserved.' 9 '' 10 'Other copyright acknowledgements can be found in the Notices file.' 11 '' 12 'The Java technology is owned and exclusively licensed by Sun Microsystems Inc.' 13 'Java and all Java-based trademarks and logos are trademarks or registered' 14 'trademarks of Sun Microsystems Inc. in the United States and other countries.' 15 '' 16 'US Govt Users Restricted Rights - Use duplication or disclosure' 17 'restricted by GSA ADP Schedule Contract with IBM Corp.' DB<4> x @array2 = read_file( $file ) || die "Cannot read $file\n"; 0 'Licensed material - Property of IBM. IBM(R) SDK, Java(TM) Technology Edition, Version 6 IBM(R) Runtime Environment, Java(TM) Technology Edition, Version 6 Copyright Sun Microsystems Inc, 1992, 2008. All rights reserved. Copyright IBM Corporation, 1998, 2009. All rights reserved. The Apache Software License, Version 1.1 and Version 2.0 Copyright 1999-2007 The Apache Software Foundation. All rights reserved. Other copyright acknowledgements can be found in the Notices file. The Java technology is owned and exclusively licensed by Sun Microsystems Inc. Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems Inc. in the United States and other countries. US Govt Users Restricted Rights - Use duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp. ' Why does the || die make a difference? I have a feeling this might be more of a Perl precedence question instead of a File::Slurp question. I looked in the File::Slurp module and it looks like it is set to croak if there is a problem, so I guess the proper way to do it is to allow File::Slurp to croak for you. Now I'm just curious why I was seeing these differences.

    Read the article

  • File upload permission problem IIS 7

    - by krish
    I am unable to upload files to website hosted under IIS7. I have already given write permissions to "IUSR_websitename" and set the property in web.config also. I am able to upload files with out log in to application at the time of user registration. But once log in to application, if I upload files, it is giving "Access denied" error. Please help me.

    Read the article

  • Char error C langauge

    - by Nadeem tabbaa
    i have a project for a course, i did almost everything but i have this error i dont know who to solve it... the project about doing our own shell some of them we have to write our code, others we will use the fork method.. this is the code, #include <sys/wait.h> #include <dirent.h> #include <limits.h> #include <errno.h> #include <stdlib.h> #include <string.h> #include<stdio.h> #include<fcntl.h> #include<unistd.h> #include<sys/stat.h> #include<sys/types.h> int main(int argc, char **argv) { pid_t pid; char str[21], *arg[10]; int x,status,number; system("clear"); while(1) { printf("Rshell>" ); fgets(str,21,stdin); x = 0; arg[x] = strtok(str, " \n\t"); while(arg[x]) arg[++x] = strtok(NULL, " \n\t"); if(NULL!=arg[0]) { if(strcasecmp(arg[0],"cat")==0) //done { int f=0,n; char l[1]; struct stat s; if(x!=2) { printf("Mismatch argument\n"); } /*if(access(arg[1],F_OK)) { printf("File Exist"); exit(1); } if(stat(arg[1],&s)<0) { printf("Stat ERROR"); exit(1); } if(S_ISREG(s.st_mode)<0) { printf("Not a Regular FILE"); exit(1); } if(geteuid()==s.st_uid) if(s.st_mode & S_IRUSR) f=1; else if(getegid()==s.st_gid) if(s.st_mode & S_IRGRP) f=1; else if(s.st_mode & S_IROTH) f=1; if(!f) { printf("Permission denied"); exit(1); }*/ f=open(arg[1],O_RDONLY); while((n=read(f,l,1))>0) write(1,l,n); } else if(strcasecmp(arg[0],"rm")==0) //done { if( unlink( arg[1] ) != 0 ) perror( "Error deleting file" ); else puts( "File successfully deleted" ); } else if(strcasecmp(arg[0],"rmdir")==0) //done { if( remove( arg[1] ) != 0 ) perror( "Error deleting Directory" ); else puts( "Directory successfully deleted" ); } else if(strcasecmp(arg[0],"ls")==0) //done { DIR *dir; struct dirent *dirent; char *where = NULL; //printf("x== %i\n",x); //printf("x== %s\n",arg[1]); //printf("x== %i\n",get_current_dir_name()); if (x == 1) where = get_current_dir_name(); else where = arg[1]; if (NULL == (dir = opendir(where))) { fprintf(stderr,"%d (%s) opendir %s failed\n", errno, strerror(errno), where); return 2; } while (NULL != (dirent = readdir(dir))) { printf("%s\n", dirent->d_name); } closedir(dir); } else if(strcasecmp(arg[0],"cp")==0) //not yet for Raed { FILE *from, *to; char ch; if(argc!=3) { printf("Usage: copy <source> <destination>\n"); exit(1); } /* open source file */ if((from = fopen(argv[1], "rb"))==NULL) { printf("Cannot open source file.\n"); exit(1); } /* open destination file */ if((to = fopen(argv[2], "wb"))==NULL) { printf("Cannot open destination file.\n"); exit(1); } /* copy the file */ while(!feof(from)) { ch = fgetc(from); if(ferror(from)) { printf("Error reading source file.\n"); exit(1); } if(!feof(from)) fputc(ch, to); if(ferror(to)) { printf("Error writing destination file.\n"); exit(1); } } if(fclose(from)==EOF) { printf("Error closing source file.\n"); exit(1); } if(fclose(to)==EOF) { printf("Error closing destination file.\n"); exit(1); } } else if(strcasecmp(arg[0],"mv")==0)//done { if( rename(arg[1],arg[2]) != 0 ) perror( "Error moving file" ); else puts( "File successfully moved" ); } else if(strcasecmp(arg[0],"hi")==0)//done { printf("hello\n"); } else if(strcasecmp(arg[0],"exit")==0) // done { return 0; } else if(strcasecmp(arg[0],"sleep")==0) // done { if(x==1) printf("plz enter the # seconds to sleep\n"); else sleep(atoi(arg[1])); } else if(strcmp(arg[0],"history")==0) // not done { FILE *infile; //char fname[40]; char line[100]; int lcount; ///* Read in the filename */ //printf("Enter the name of a ascii file: "); //fgets(History.txt, sizeof(fname), stdin); /* Open the file. If NULL is returned there was an error */ if((infile = fopen("History.txt", "r")) == NULL) { printf("Error Opening File.\n"); exit(1); } while( fgets(line, sizeof(line), infile) != NULL ) { /* Get each line from the infile */ lcount++; /* print the line number and data */ printf("Line %d: %s", lcount, line); } fclose(infile); /* Close the file */ writeHistory(arg); //write to txt file every new executed command //read from the file once the history command been called //if a command called not for the first time then just replace it to the end of the file } else if(strncmp(arg[0],"@",1)==0) // not done { //scripting files // read from the file command by command and executing them } else if(strcmp(arg[0],"type")==0) //not done { //if(x==1) //printf("plz enter the argument\n"); //else //type((arg[1])); } else { pid = fork( ); if (pid == 0) { execlp(arg[0], arg[0], arg[1], arg[2], NULL); printf ("EXEC Failed\n"); } else { wait(&status); if(strcmp(arg[0],"clear")!=0) { printf("status %04X\n",status); if(WIFEXITED(status)) printf("Normal termination, exit code %d\n", WEXITSTATUS(status)); else printf("Abnormal termination\n"); } } } } } } void writeHistory(char *arg[]) { FILE *file; file = fopen("History.txt","a+"); /* apend file (add text to a file or create a file if it does not exist.*/ int i =0; while(strcasecmp(arg[0],NULL)==0) { fprintf(file,"%s ",arg[i]); /*writes*/ } fprintf(file,"\n"); /*new line*/ fclose(file); /*done!*/ getchar(); /* pause and wait for key */ //return 0; } the thing is when i compile the code, this what it gives me /home/ugics/st255375/ICS431Labs/Project/Rshell.c: At top level: /home/ugics/st255375/ICS431Labs/Project/Rshell.c:264: warning: conflicting types for ‘writeHistory’ /home/ugics/st255375/ICS431Labs/Project/Rshell.c:217: note: previous implicit declaration of ‘writeHistory’ was here can any one help me??? thanks

    Read the article

  • File permissions question

    - by Camran
    If I need a php-page to have access to upload images and move images from a folder on the server, what permissions would I set on the folder then? I know we have "Owner", "Group", and "Others". But what does the server (or the php-code itself) count as? Owner? Also, would I need to set the php-page with the upload script with some specific permissions to be able to upload the files? Is it execute permissions? Thanks

    Read the article

  • CopSSH SFTP -- limit users access to their home directory only

    - by bradvido
    Let me preface this by saying I've read and followed these instructions at the FAQ many times: http://www.itefix.no/i2/node/37 It does not do what the title claims... It allows every user access to every other user's home directory, as well as access to all subfolders below the copssh installation path. I'm only using this for SFTP access and I need my users to be sandboxed into only their home directory. If you know a fool-proof way to lock users down so they can see only their home directory and its subfolders, stop reading now and reply with the solution. The details: Here is exactly what i tried as I followed the FAQ. My copSSH installation directory is: C:\Program Files\CopSSH net localgroup sftp_users /ADD **Create a user group to hold all my SFTP users cacls c:\ /c /e /t /d sftp_users **For that group, deny access at the top level and all levels below cacls "C:\Program Files\CopSSH" /c /e /t /r sftp_users **Allow my user group access to the copSSH installation directory and its subdirectories For each sftp user, I create a new windows user account, then I: net localgroup sftp_users sftp_user_1 /add **Add my user to the group I've created Open the activate user wizard for CopSSH, choosing the user, "/bin/sftponly" and Remove copssh home directory if it exists **Remains checked Create keys for public key authentication **Remains checked Create link to user's real home directory **Remains checked This works, however, every user has access to every other user's home directory as well as the CopSSH root directory.... So I tried denying access for all users to the user home directory: cacls "C:\Program Files\CopSSH\home" /c /e /t /d sftp_users **Deny access for users to the user home directory Then I tried adding permissions on a user-by-user basis for each users home\username folder. However,these permission were not allowed by windows because of the above deny rule i created at the home directory was being inherited and over-riding my allow rule. The next step for me would be to remove the deny rule at the home directory and for each user folder, add a deny rule for every user it doesn't belong to, and add an allow rule for the one user it does belong to. However, as my user list gets long, this will become very cumbersome. Thanks for the help!

    Read the article

  • CopSSH SFTP -- limit users access to their home directory only

    - by bradvido
    Let me preface this by saying I've read and followed these instructions at the FAQ many times: http://www.itefix.no/i2/node/37 It does not do what the title claims... It allows every user access to every other user's home directory, as well as access to all subfolders below the copssh installation path. I'm only using this for SFTP access and I need my users to be sandboxed into only their home directory. If you know a fool-proof way to lock users down so they can see only their home directory and its subfolders, stop reading now and reply with the solution. The details: Here is exactly what i tried as I followed the FAQ. My copSSH installation directory is: C:\Program Files\CopSSH net localgroup sftp_users /ADD **Create a user group to hold all my SFTP users cacls c:\ /c /e /t /d sftp_users **For that group, deny access at the top level and all levels below cacls "C:\Program Files\CopSSH" /c /e /t /r sftp_users **Allow my user group access to the copSSH installation directory and its subdirectories For each sftp user, I create a new windows user account, then I: net localgroup sftp_users sftp_user_1 /add **Add my user to the group I've created Open the activate user wizard for CopSSH, choosing the user, "/bin/sftponly" and Remove copssh home directory if it exists **Remains checked Create keys for public key authentication **Remains checked Create link to user's real home directory **Remains checked This works, however, every user has access to every other user's home directory as well as the CopSSH root directory.... So I tried denying access for all users to the user home directory: cacls "C:\Program Files\CopSSH\home" /c /e /t /d sftp_users **Deny access for users to the user home directory Then I tried adding permissions on a user-by-user basis for each users home\username folder. However,these permission were not allowed by windows because of the above deny rule i created at the home directory was being inherited and over-riding my allow rule. The next step for me would be to remove the deny rule at the home directory and for each user folder, add a deny rule for every user it doesn't belong to, and add an allow rule for the one user it does belong to. However, as my user list gets long, this will become very cumbersome. Thanks for the help!

    Read the article

  • Windows Server 2008 R2 RAS VPN: access server on internal interface ip

    - by Mathias
    short question: I'm usually a linux admin but need to setup a Win2k8 R2 server for a student project. The server is running as VM on a root server and has a public internet IP assigned. Additionally I need a VPN server to access some services running on the server. I managed to set up a working VPN gateway via the Routing and RAS service which assigns clients an IP in the private subnet 192.168.88.0/24 with the Interface "Internal" listening on 192.168.88.1. Additionally I set up the external interface as NAT interface. So I can connect to the VPN server, get an IP assigned and the server additionally does NAT and I can access the internet over the VPN connection. The only thing I additionally need, is that I can access the server itself over that internal IP (e.g. client 192.168.88.2, server 192.168.88.1) as I want to access some services which I don't like to expose to the internet and restrict them to connected VPN clients. Does anybody have a hint, which configuration I'm missing here to be able to access the server over the VPN connection? EDIT: VPN clients get assigned the IP from the private subnet with subnetmask 255.255.255.255, I guess that might be the reason I can't access the server on the private IP address although it's in the same network range. Any ideas how to change this? I defined a static address pool in the Routing and RAS service, but I can't change the netmask there. EDIT2: I can't access the server from the client, but I can fully access the client from the server (ping, HTTP). I guess it has to do with firewall configuration. Thanks in advance, Mathias

    Read the article

  • Windows Server 2008 R2 RAS VPN: access server on internal interface ip

    - by Mathias
    Hey, short question: I'm usually a linux admin but need to setup a Win2k8 R2 server for a student project. The server is running as VM on a root server and has a public internet IP assigned. Additionally I need a VPN server to access some services running on the server. I managed to set up a working VPN gateway via the Routing and RAS service which assigns clients an IP in the private subnet 192.168.88.0/24 with the Interface "Internal" listening on 192.168.88.1. Additionally I set up the external interface as NAT interface. So I can connect to the VPN server, get an IP assigned and the server additionally does NAT and I can access the internet over the VPN connection. The only thing I additionally need, is that I can access the server itself over that internal IP (e.g. client 192.168.88.2, server 192.168.88.1) as I want to access some services which I don't like to expose to the internet and restrict them to connected VPN clients. Does anybody have a hint, which configuration I'm missing here to be able to access the server over the VPN connection? EDIT: VPN clients get assigned the IP from the private subnet with subnetmask 255.255.255.255, I guess that might be the reason I can't access the server on the private IP address although it's in the same network range. Any ideas how to change this? I defined a static address pool in the Routing and RAS service, but I can't change the netmask there. EDIT2: I can't access the server from the client, but I can fully access the client from the server (ping, HTTP). I guess it has to do with firewall configuration. Thanks in advance, Mathias

    Read the article

  • Configure IIS Web Site for alternate Port and receive Access Permission error

    - by Andrew J. Brehm
    When I configure IIS to run a Web site on Port 1414, I get the following error: --------------------------- Internet Information Services (IIS) Manager --------------------------- The process cannot access the file because it is being used by another process. (Exception from HRESULT: 0x80070020) However, as according to netstat the port is not in use. Completely aside from IIS, I wrote a test program (just to open the port and test it): TcpListener tcpListener; tcpListener = new TcpListener(IPAddress.Any, port); try { tcpListener.Start(); Console.WriteLine("Press \"q\" key to quit."); ConsoleKeyInfo key; do { key = Console.ReadKey(); } while (key.KeyChar != 'q'); } catch (Exception ex) { Console.WriteLine(ex.Message); } tcpListener.Stop(); The result was an exception and the following ex.Message: An attempt was made to access a socket in a way forbidden by its access permissions The port was available but its "access permissions" are not allowing me access. This remains after several restarts. The port is not reserved or in use as far as I know and while IIS says it is in use, netstat and my test program say it is not and my test program receives the error that I am not allowed to access the port. The test program ran elevated. The IIS Site is running MQSeries, but the MQ listener also cannot start on port 1414 because of this issue. A quick search of my registry found nothing interesting for port 1414. What are socket access permissions and how can I correct mine to allow access?

    Read the article

  • Access denied to external USB disk; update access rights fails in Windows 8

    - by gerard
    I use to work with 2 laptops (Windows vista and Windows 7), my work files being on an external usb disk. My oldest laptop broke down, so I bought a new one. I had no option other than take Windows 8. I suspect something changed with access rights, as my external disk suffered some "access denied" problem on Windows. I was prompted (by Windows 8) somehow to fix the access rights, which I tried to do, getting to the properties - security. This process was very slow and ended up saying disk is not ready Additionally, my external usb disk somehow was not recognized anymore. Back to Windows 7, I was warned that my disk needed to be verified, which I did. In this process, some files were lost (most of them I could recover from the folder found00x, but I have some backup anyway). Also, I don't know why, but under Windows 7, all the folder showed with a lock. Then back again to Windows 8. Same problem : access denied to my disk + no way to change access rights as it gets stuck disk is not ready". Now I am pretty sure there is some kind of bug or inconsistency in Windows 8 / Windows 7. I did 2. and 3. a few times. At some point, I also got an access denied in Windows 7. I could restore access rights to the disk to "System" (properties - security - EDIT for full control to group "system". ). But then I still get the same access right pb on Windows 8, and getting stuck in the process to restore full control to "system" -- and "admin" groups. I upgraded Windows8 with the Windows8 updates available. Does not help.

    Read the article

  • Access Music from Amie Street in Boxee

    - by Mysticgeek
    One of our favorite sites for discovering new music is Amie Street. Today we take a look at the Amie Street app for Boxee that allows you to access your favorite tunes from the Boxee interface. Amie Street is a cool site that allows you to discover a lot of cool music from independent artists. What makes Amie Street unique is that most of the music starts out free, then the price goes up incrementally as its popularity grows. The Amie Street App for Boxee let’s you access music and playlists you’ve created on the site, with more features are on the way. For this example we’re using the mouse and keyboard, but of course you can also get to each section using your remote if you have one. Or you can turn your iPod touch into a Boxee remote too. Amie Street in Boxee To access the Amie Street app, launch Boxee and click on Apps from the main menu. Under the Search Sidebar type in Amie Street and select it from the results field.   Then you can add it to the My Apps section…and double-click on the icon. Click on Start to begin using it. You’ll be be presented with a Welcome screen where you can sign into your account. If you don’t have an account yet, there is also an option to go to the Amie Street site and create one. Enter in your account credentials… Now you’ll be able to access your Library, Playlists, Search for new tunes, and check out your Recommended bands and artists. Hover the pointer over an album to get a bit more info about it such as the music genre. You’ll be able to play the songs from the playlists you created on the Amie Street site. You can browse through the history of the music you’ve played as well. Not all the features of this app seem to work as you’d expect them to, and some of the features are not yet available like the Browse feature.   Conclusion At the time of this writing we weren’t able to purchase music or get additional information about the artists. As development continues on Boxee and this app, you can expect more of a full user experience and the ability to purchase music. Even though some of the features are a bit buggy or not available, if you’re a Boxee user and a fan of Amie Street, this is cool app to add to your collection. Download Boxee for Windows, Mac, and Ubuntu Learn more about Amie Street on Boxee Similar Articles Productive Geek Tips Amie Street Downloader Makes Purchasing Music EasierFind Free or Cheap Indie Music at Amie StreetIntegrate Boxee with Media Center in Windows 7Using Pandora in BoxeeGetting Started with Boxee TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Watch World Cup Online On These Sites Speed Up Windows With ReadyBoost Awesome World Cup Soccer Calendar Nice Websites To Watch TV Shows Online 24 Million Sites Windows Media Player Glass Icons (icons we like)

    Read the article

  • How can I access my favorites in a Windows 7 file dialog box?

    - by Edward Tanguay
    When I am in an application which allows me to go get a file, the following dialog box pops up. Of course at this point I often want to have access my favorites, but they are not listed here. How can I get a link to my favorites listed here? If there is no answer, I will have to install filebox extender again like I have been since Windows XP, but I just thought they would have solved this by now in Windows 7.

    Read the article

  • Access denied error while mounting a shared folder?

    - by SSH
    I am a linux newbie and I have a very basic question. I have three machines - machineA 10.108.24.132 machineB 10.108.24.133 machineC 10.108.24.134 and all those machines have Ubuntu 12.04 installed in it and I have root access to all those three machines. Now I am supposed to do below things in my above machines - Create mount point /opt/exhibitor/conf Mount the directory in all servers. sudo mount <NFS-SERVER>:/opt/exhibitor/conf /opt/exhibitor/conf/ I have already created /opt/exhibitor/conf directory in all those three machines as mentioned above. Now I am trying to create a Mount Point on all those three machines. So I followed the below process - Install NFS support files and NFS kernel server in all the above three machines $ sudo apt-get install nfs-common nfs-kernel-server Create the shared directory in all the above three machines $ mkdir /opt/exhibitor/conf/ Edited the /etc/exports and added the entry like this in all the above three machines - # /etc/exports: the access control list for filesystems which may be exported # to NFS clients. See exports(5). # # Example for NFSv2 and NFSv3: # /srv/homes hostname1(rw,sync,no_subtree_check) hostname2(ro,sync,no_subtree_check) # # Example for NFSv4: # /srv/nfs4 gss/krb5i(rw,sync,fsid=0,crossmnt,no_subtree_check) # /srv/nfs4/homes gss/krb5i(rw,sync,no_subtree_check) # /opt/exhibitor/conf/ 10.108.24.*(rw) Run exportfs in all the above three machines root@machineA:/# exportfs -rv exportfs: /etc/exports [1]: Neither 'subtree_check' or 'no_subtree_check' specified for export "10.108.24.*:/opt/exhibitor/conf/". Assuming default behaviour ('no_subtree_check'). NOTE: this default has changed since nfs-utils version 1.0.x exporting 10.108.24.*:/opt/exhibitor/conf Now I did showmount on machineA root@machineA:/# showmount -e 10.108.24.132 Export list for 10.108.24.132: /opt/exhibitor/conf 10.108.24.* And also I have started the NFS server like this in all the above three machines - sudo /etc/init.d/nfs-kernel-server start And now when I did this, I am getting an error - root@machineA:/# sudo mount -t nfs 10.108.24.132:/opt/exhibitor/conf /opt/exhibitor/conf/ mount.nfs: access denied by server while mounting 10.108.24.132:/opt/exhibitor/conf I have also tried doing the same thing from machineB and machineC as well and still I get the same error- root@machineB:/# sudo mount -t nfs 10.108.24.132:/opt/exhibitor/conf /opt/exhibitor/conf/ root@machineC:/# sudo mount -t nfs 10.108.24.132:/opt/exhibitor/conf /opt/exhibitor/conf/ Did my /etc/exports file looks good? As I have the same content in all the three machines. And also are there any logs related to NFS which I can see to find any clues? Any idea what wrong I am doing here? UPDATE:- So my etc/exports files would be like this in all the three machines - # /etc/exports: the access control list for filesystems which may be exported # to NFS clients. See exports(5). # # Example for NFSv2 and NFSv3: # /srv/homes hostname1(rw,sync,no_subtree_check) hostname2(ro,sync,no_subtree_check) # # Example for NFSv4: # /srv/nfs4 gss/krb5i(rw,sync,fsid=0,crossmnt,no_subtree_check) # /srv/nfs4/homes gss/krb5i(rw,sync,no_subtree_check) # /opt/exhibitor/conf/ 10.108.24.132(rw) /opt/exhibitor/conf/ 10.108.24.133(rw) /opt/exhibitor/conf/ 10.108.24.134(rw) Just a quick check - The IP Address that I am taking for each machine as mentioned above is like this - root@machineB:/# ifconfig eth0 Link encap:Ethernet HWaddr 00:50:56:ad:5b:a7 inet addr:10.108.24.133 Bcast:10.108.27.255 Mask:255.255.252.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5696812 errors:0 dropped:12462 overruns:0 frame:0 TX packets:5083427 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7904369145 (7.9 GB) TX bytes:601844910 (601.8 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:187144 errors:0 dropped:0 overruns:0 frame:0 TX packets:187144 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:24012302 (24.0 MB) TX bytes:24012302 (24.0 MB) Here the IP Address that I am taking for machineB is 10.108.24.133.

    Read the article

  • What is the most secure way to allow a user read access to a log file?

    - by gAMBOOKa
    My application requires read access to /var/log/messages, which belongs to user and group root. What is the minimal exposure level required on /var/log/messages so my application can read it? Presently, my plan is to change the group ownership of /var/log/messages to a new group, and add root and my application user to it, but this would also give the application write privileges to /var/log/messages. OS: Centos 5.5

    Read the article

  • How to access files on another local Windows 7 computer without using any native Windows features?

    - by user1356682
    I do not want to use any native Windows features, services, nor anything do to this. It needs to be a standalone program, with ZERO Windows dependencies. Just like TeamViewer does not use any native Windows features, so I want to be able to access files and folders in a standalone program. No remote desktop No VNC type programs No Windows File Sharing No Shared Folders in Windows No internet connection required It needs ability to view, edit, transfer files at normal network rates.

    Read the article

  • File path for J2ME FileConnection?

    - by Kilnr
    Hi, I'm writing a MIDlet which needs to write file. I'm using FileConnection from JSR-75 to accomplish this. The intention is to have this MIDlet runnning on as much devices as possible (all MIDP 2.0 devices with JSR-75 support, ideally). On several emulators and an HTC Touch Pro2, I can perfectly use the following code to get the root of the filesystem: Enumeration drives = FileSystemRegistry.listRoots(); String root = (String) drives.nextElement(); String path = "file:///" + root; However, on a Nokia S60 5th edition emulator, trying to open a FileConnection to this path throws a java.lang.SecurityException. Apparently S60 devices do not allow connections to the root of the filesystem. I realise I can use something like System.getProperty("fileconn.dir.photos"), but that isn't supported on all devices either. So, my actual question: what is the best approach to get a path to create a FileConnection with, that allows for maximum portability? Thanks. Edit: I suppose I could iterate over all the roots in the Enumeration, and check for a writable one, but that's hardly optimal for two reasons. First, there aren't necessarily any writable roots. Second, this could be the phone memory or a memory card, so the storage method wouldn't be consistent across devices, which is rather ugly.

    Read the article

  • Iterating arrays in a batch file

    - by dboarman-FissureStudios
    I am writing a batch file (I asked a question on SU) to iterate over terminal servers searching for a specific user. So, I got the basic start of what I'm trying to do. Enter a user name Iterate terminal servers Display servers where user is found (they can be found on multiple servers now and again depending on how the connection is lost) Display a menu of options Iterating terminal servers I have: for /f "tokens=1" %%Q in ('query termserver') do (set __TermServers.%%Q) Now, I am getting the error... Environment variable __TermServers.SERVER1 not defined ...for each of the terminal servers. This is really the only thing in my batch file at this point. Any idea on why this error is occurring? Obviously, the variable is not defined, but I understood the SET command to do just that. I'm also thinking that in order to continue working on the iteration (each terminal server), I will need to do something like: :Search for /f "tokens=1" %%Q in ('query termserver') do (call Process) goto Break :Process for /f "tokens=1" %%U in ('query user %%username%% /server:%%Q') do (set __UserConnection = %%C) goto Search However, there are 2 things that bug me about this: Is the %%Q value still alive when calling Process? When I goto Search, will the for-loop be starting over? I'm doing this with the tools I have at my disposal, so as much as I'd like to hear about PowerShell and other ways to do this, it would be futile. I have notepad and that's it. Note: I would continue this line of questions on SuperUser, except that it seems to be getting more into programming specifics.

    Read the article

  • File extensions and MIME Types in .NET

    - by Marc Climent
    I want to get a MIME Content-Type from a given extension (preferably without accessing the physical file). I have seen some questions about this and the methods described to perform this can be resumed in: Use registry information. Use urlmon.dll's FindMimeFromData. Use IIS information. Roll your own MIME mapping function. Based on this table, for example. I've been using no.1 for some time but I realized that the information provided by the registry is not consistent and depends on the software installed on the machine. Some extensions, like .zip don't use to have a Content-Type specified. Solution no.2 forces me to have the file on disk in order to read the first bytes, which is something slow but may get good results. The third method is based on Directory Services and all that stuff, which is something I don't like much because I have to add COM references and I'm not sure it's consistent between IIS6 and IIS7. Also, I don't know the performance of this method. Finally, I didn't want to use my own table but at the end seems the best option if I want a decent performance and consistency of the results between platforms (even Mono). Do you think there's a better option than using my own table or one of other described methods are better? What's your experience?

    Read the article

  • File Format DOS/Unix/MAC code sample

    - by mac
    I have written the following method to detemine whether file in question is formatted with DOS/ MAC, or UNIX line endings. I see at least 1 obvious issue: 1. i am hoping that i will get the EOL on the first run, say within first 1000 bytes. This may or may not happen. I ask you to review this and suggest improvements which will lead to hardening the code and making it more generic. THANK YOU. new FileFormat().discover(fileName, 0, 1000); and then public void discover(String fileName, int offset, int depth) throws IOException { BufferedInputStream in = new BufferedInputStream(new FileInputStream(fileName)); FileReader a = new FileReader(new File(fileName)); byte[] bytes = new byte[(int) depth]; in.read(bytes, offset, depth); a.close(); in.close(); int thisByte; int nextByte; boolean isDos = false; boolean isUnix = false; boolean isMac = false; for (int i = 0; i < (bytes.length - 1); i++) { thisByte = bytes[i]; nextByte = bytes[i + 1]; if (thisByte == 10 && nextByte != 13) { isDos = true; break; } else if (thisByte == 13) { isUnix = true; break; } else if (thisByte == 10) { isMac = true; break; } } if (!(isDos || isMac || isUnix)) { discover(fileName, offset + depth, depth + 1000); } else { // do something clever } }

    Read the article

  • Websphere logs report {0} File not found, but application continues to work without issues

    - by Eric
    A websphere 6.1 server is running a struts application that seems to be working fine. In the logs, however, I'm seeing the following error message, which is being continually emailed to the support staff. com.ibm.ws.webcontainer.webapp.WebAppErrorReport: SRVE0190E: File not found: {0} at com.ibm.ws.webcontainer.webapp.WebAppDispatcherContext.sendError(WebAppDispatcherContext.java:536) at com.ibm.ws.webcontainer.srt.SRTServletResponse.sendError(SRTServletResponse.java:930) at com.ibm.ws.webcontainer.extension.DefaultExtensionProcessor.handleRequest(DefaultExtensionProcessor.java:524) at com.ibm.ws.wswebcontainer.extension.DefaultExtensionProcessor.handleRequest(DefaultExtensionProcessor.java:111) at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:3129) at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:238) at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:811) at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1433) at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:93) I can narrow down the issue to a single Action and JSP, which are too big to show here, but here's the action definition in struts-config.xml: <action path="/HappyDefaultThing" name="HappyDefaultThingActionForm" type="com.foo.webadministration.action.HappyDefaultThingAction" validate="true" input="/WaAssignDefaultHappyThing.jsp" scope="session"> <forward name="success" path="/WaAssignDefaultHappyThing.jsp"/> <forward name="failure" path="/WaAssignDefaultHappyThing.jsp"/> </action> As far as I can see, nothing is missing, and everything necessary is being found, but the logs say "File not found: {0}" What is "{0}"?? The stack trace only shows IBMs code, which I can't see the source of, and therefore can't trace. Is this a bug in the websphere code? I'd appreciate any help.

    Read the article

< Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >