Search Results

Search found 31701 results on 1269 pages for 'google drive'.

Page 103/1269 | < Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >

• EEE PC 701/4G Surf Internal Drive: Is it really SSD?

  - by Bart Silverstrim

  I have an old EEE PC with the 4 Gig internal drive. Everything I've read keeps saying it's an SSD drive; running lshw tells me that it's an ATA disk, Silicon Motion SM. The thing seems to be rather slow, though. I know it has a 900 Mhz Celeron processor and only 512 meg of RAM, but it seems like drive access is slow even for those specs. Does anyone know if it really has an SSD drive? I thought that compared to regular hard disks SSD's were blazing fast, and this feels like and acts like it's pulling from something more akin to an internal USB memory stick.

  Read the article

• Why does unpartitioned Hitachi HDS5C3020 drive start consuming 50% more power 15 minutes after boot?

  - by Pro Backup

  In a Debian 6.0.6 system there are 74 pieces of 2TB Toshiba DT01ABA200 drives. These drives are identified as Hitachi HDS5C3020BLE630 drives running firmware revision MZ4OAAB0. 64 Drives attached via HP SAS expander cards to an LSI 2008 SAS controller, another 5 drives are connected directly to the mainboard, 4 drives are connected to a Sil based PCI controller and last 1 drive is only powered and has no data cable connected. The controller LSI and Sil card's their onboard BIOS are both disabled and the mpt2sas and sata_sil modules are removed from the Linux debian 2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 x86_64 GNU/Linux kernel. The mpt2sas module is loaded after boot using a modprobe command in /etc/rc.local. These 74 drives are not partitioned, neither formatted and also not mounted. The system consumes: with 0 drives: 70.6 - 70.9 Watt (also 15 minutes after boot); with 74 drives: 330 - 360 Watt, just after boot (is equivalent to 3.5 - 3.9W per drive in idle state); with 74 drives: 420 - 466 Watt, each time in the 15th minute of uptime (is equivalent to 4.7 - 5.3W per drive in idle state). The drive specification lists 4.7W as read/write, and 3.3W as idle power consumption. The increased power consumption is most likely on the 5V line, because after roughly 1 minute an "over current protection" (OCP) of the power supply (PSU) shuts down the power. The used PSU is a single rail model with an OCP of 122A on the 12V line and 55A on the 5V line. Regression: It doesn't matter whether the drive its APM value is set to disabled or 1 (maximum power saving). The operating system records no read/write activity in /proc/diskstats. The values there are identical (28 read, 0 write operations) as immediately after the modprobe operation. Can't test what happens when booting into the mainboard it's BIOS - to exclude any OS intervention - because the Super Micro X8SI6-F mainboard running firmware 06/27/12 has a bug that incorrectly reads a +74.0 C CPU sensor temperature as "High" in BIOS mode, and shuts down the power after 1 minute. What might be causing the drive read/write activity on all drives in the 15th minute after boot and how to prevent it from happening?

  Read the article

• How to unblacklist an IP at Google?

  - by DJRayon

  I own a small business with two servers for webhosting. When setting up the primary (CentOS 5.5 + WHM, secondary is WHM DNS Only) server I kinda messed up the firewall, so the hackers could send stuff from my server. My primary IP is x.y.29.218. Anyway - I got blacklisted in several places, but now those blacklistings are gone. For a week or so, but Google still has my IP blacklisted. I handling serious damages because of that. Many clients want to switch from my hosting, etc. I've fixed the hole with CSF firewall SMTP_BLOCK option and enabled also the WHM SMTP TEAK Currently all I see from the Main Email View Mail Statistics (Errors section) in WHM is rows and rows of the following message removed-the-email-address-for-security R=lookuphost T=remote_smtp: SMTP error from remote mail server after end of data: host aspmx.l.google.com [a.b.39.27]: 550-5.7.1 [x.y.29.218 1] Our system has detected an unusual rate of\n550-5.7.1 unsolicited mail originating from your IP address. To protect our\n550-5.7.1 users from spam, mail sent from your IP address has been blocked.\n550-5.7.1 Please visit http://www.google.com/mail/help/bulk_mail.html to review\n550 5.7.1 our Bulk Email Senders Guidelines. h24si3868764fas.171 What are my options? I have one IP free. How can I configure Exim to send mail from that IP? My brain is like constantly blowing up because of this problem. Please someone, who has any knowledge how to deal with the current situation, please give me some kind of help - any help, suggestions, etc. I've tried everything I know, and I still don't know much, because this is the first time (I just started to webhost, etc) I deal with real physical servers not some kind of pre-setup VPS solution. Many - many thanks, whoever has time to offer some help.

  Read the article

• Will Windows XP work on a Hybrid Hard Drive?

  - by Ben Torell

  I'm looking into getting the Seagate Momentus XT hybrid hard drive, and I'm planning on dual booting between Windows 7 and Windows XP. I know 7 and Vista have native support for taking advantage of the SSD portion of a hybrid drive, and I assume XP does not have any such support, but will XP still work on the drive? I would think it will, but I wanted to be sure, and the Googles are coming up empty for me on this one. Thanks!

  Read the article

• Real performance gain from faster IDE or SATA hard drive?

  - by raw_noob

  How much of a real-world performance gain would you expect from: replacing a 5400rpm IDE HD with a 7200rpm IDE HD? replacing a 5400rpm IDE HD with a SATA-150? It's assumed that the drive in question is both the system drive and the only drive. A modest AMD Sempron-based home computer with adequate DDR memory running Windows XP Home SP3. Thanks for looking.

  Read the article

• Google account gives ERR_SSL_BAD_RECORD_MAC_ALERT errors

  - by Kjensen

  A couple of days ago, I started being unable to connect to accounts.google.com, which handles logins to all kinds of google services. I get this error in Chrome: Error 126 (net::ERR_SSL_BAD_RECORD_MAC_ALERT): Unknown error. In IE I get this: I assume it is the same error, just wrapped up. I run Win8 RTM. On the SAME machine, using the same network card, in a VMWare workstation image running Win7, I am able to connect perfectly. On another of my machines on my network, I am also still able to connect with no problem. My girlfriend uses the same network and has also complained a couple of times about this error (google calendar) - but this is anecdotal, since her technical troubleshooting abilities stop at "xxxx is broken". Her machine runs Win7. ;) I have rebooted, cleared cookies, do not run any antivirus/firewall, have not changed network config. The first 3-4 days after installing Win8, I did not have any problems. I have also searched, and found a hint about enabling SSL2.0 in connection settings, which did not help. Anybody know something about this error and what I can do to fix it?

  Read the article

• How do I turn a shared computer back into a shared media drive?

  - by Brian Green

  There is an external hard drive that is set up as a shared media device for a TV. I tried to hook up my the library on my desktop as a shared media drive to watch movies from my computer on the TV. It worked for a little bit but about 5 seconds after getting into my computer the tv went blank and I couldn't access the external hard drive any more. When I checked on my computer the Hard drive was no longer a shared media device but now it was a computer on the network. How do I fix this and turn it back into a shared media device so I can access it on the TV?

  Read the article

• Why is writing to my external hard drive slow, while benchmarks show fast writing?

  - by matix2267

  I have an iOmega eGo 320GB portable drive connected through USB2.0 to my laptop running Windows Vista. It's been working fine for quite some time until recently it became very slow when writing e.g. when copying ~300MB movie over to the drive at first it is extremely fast but it actually doesn't write it only puts in cache and then hangs on last 10-20MBs for about a minute. When copying larger files it's the same story: starts fast but then slows down to ~5MB/s (sometimes even slower down to 2MB/s). Strange thing is that I have always had caching disabled for this drive (it was disabled by default and I never bothered changing it). At first I thought that the disk is dying so I checked S.M.A.R.T. values and everything is fine there. I also run chkdsk and it seemed to fix the problem - it worked fast for a few minutes but then it slowed down again. I also tried plugging it into another USB port - no difference. Additionally I noticed that reading under certain circumstances is sometimes slower e.g. loading times for some games are ~10 times longer, whereas simple copying files from this drive to my internal HDD is fast. I ran a speed benchmark using CrystalDiskMark with a 5x100MB run and strangely got these results: read write (MB/s) Seq 33.05 28.25 512k 17.30 15.27 4k 0.267 0.372 4kQD32 0.510 0.260 This is different from what most other people have (I've found many threads about slow disk write while googling but all of them were slow on benchmarks too) which is why I decided to post this problem here. BTW most of the time when writing (or sometimes reading) the activity led is mostly idle (blinks a while and then stops for longer, sometimes has slower blinks ~1 sek, sometimes goes off for a few seconds - extremely long blink :) ) but when benchmarking, defragmenting or just reading (copying from this drive, installing apps from installers there, watching HD videos) it is blinking really fast (like it should) and there are no slowdowns. It shouldn't be driver issue unless stock Windows drivers have some issues I'm not aware of.

  Read the article

• Strange problem with Google Mail and IMAP on Outlook 2007

  - by Alex C.

  I work for a small non-profit organization. We have about 35 administrative employees who use e-mail. We're on a Windows network with a domain. Everyone is running XP Pro and Office 2007 with all updates/patches. We used to use POP3 mail through a local provider. However, we recently signed-up for a free Google Apps account, and we switched to IMAP mail through Google. Everyone uses Outlook 2007 as the client. For about ten days, everything was working fine. Yesterday afternoon, we suddenly developed a strange and annoying problem. Every time you send an e-mail message, a copy of your outgoing message shows up in your inbox. It's as if you're adding your own address to the CC: line of every message. Nothing has changed on our end. I was hoping that the problem was a temporary glitch that would resolve itself, but here we are about 24 hours later, and it's still happening. I searched Twitter, and there were a handful of vague messages about issues with Google mail and IMAP, but I didn't see any references to this specific problem. Any thoughts on what's going on here and how to fix it?

  Read the article

• Is a computer's DRAM size not as important once we get a Solid State Drive?

  - by Jian Lin

  I am thinking of getting a Dell X11 netbook, and it can go up to 8GB of DRAM, together with a 256GB Solid State Drive. So in that case, it can handle quite a bit of Virtual PC running Linux, and Win XP, etc. But is the 8GB of RAM not so important any more? Won't 2GB or 4GB be quite good if a Solid State Drive is used? I think the most worrying thing is that the memory is not enough and the less often used data is swapped to the pagefile on hard disk and it will become really slow, but with an SSD drive, the problem is a lot less of a concern? Is there a comparison as to, if DRAM speed is n, then SSD drive speed is how many n and hard disk speed is how many n just as a ball park comparison?

  Read the article

• if a usb pen drive has 64349 cylinders, is it damaged?

  - by Andrew S

  I have a 4Gb USB pen drive that I'm trying to format with FAT32. When I run fdisk, it gives me this message: The number of cylinders for this disk is set to 64349. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) I've tried deleting the partition table, creating new partitions, etc, but they never work. Sometimes I can write to the drive the first time I use it after formatting it, but then it becomes read-only in both Windows and Linux. I've tried this on multiple computers. Am I doing something wrong, or is the drive reporting an incorrect number of cylinders? Is the drive itself likely to be corrupted, and is there anyway to fix this under Windows Vista or Linux? Thanks

  Read the article

• What's a fast way to copy a lot of files from an internal hard-drive to external (USB) storage?

  - by jonathanconway

  I have a large amount of data - about 500 GB - on the internal hard drive of a desktop PC. This includes music, videos, PDFs... you name it. I want to copy everything to an external USB hard drive (1.5 tb capacity). The desktop PC runs Ubuntu. To being with, I simply plugged in and mounted the hard drive and dragged the top-level folder onto the drive. It's started copying, but it seems to be proceeding very slowly. About 10 minutes later and it's only done about 500 MB. I'm sure this is slower than what I could achieve with less total data. So I'm wondering if there's a quicker way of doing this. Would it be better to copy it in portions of 500MB or so, rather than all at once?

  Read the article

• Mac failing (failed?) hard drive - is all hope lost?

  - by Daniel

  It's a 500 GB Seagate laptop hard drive that came with my Macbook Pro. Apple partition format. Already replaced and now have it external, connected via SATA/USB adapter. Trying to get just a few files that I worked on while out of town when it crashed (and thus did not have my time machine backup drive). Drive will not mount, but OS X Disk Utility detects it and can read the capacity, model number, and even the name of the partition, which leads me to believe all hope may not be lost. Failed attempts so far: Disk Utility verify+repair says drive cannot be repaired and that I should back up immediately (lovely) Disk Warrior says it cannot rebuild the directory due to hardware failure Data Rescue quick & deep scans immediately failed PhotoRec says "error reading sector" for every sector (at least for the few minutes I let it run before closing it to explore other options) What else can I try here? Again, I'm just looking for a few, small files (python scripts to be specific) - not a full recovery.

  Read the article

• What could be wrong with my CD drive and how do you fix it?

  - by Jamie

  My CD drive hasn't worked in about 8 months. I was burning CDs in a hurry and pulled it out because it was taking too long (probably an average amount of time). Im running a laptop (Toshiba Satellite A505-6965) that uses a slot drive. Now my computer doesn't accept CDs. It used to pull them in but it doesn't anymore. Ive heard it make odd noises a few times but thats it. The slot is these spongey things and Ive managed to peek into the drive with a flashlight and theres nothing in the way, really. Could someone explain the mechanics of what happened and if it would be possible to fix it? If itd be possible to fix it through Linux that would be great since I keep getting the BSOD (0x0000007B) and am going to try reinstalling Windows 7. But I can't really do that since I don't have a USB drive larger than 2 GB (Windows is about 4 GB) so Im relying on Linux ATM.

  Read the article

• Should I use VFAT or ext3 for a 1Tb external usb hard drive?

  - by ihuston

  I have a 1 Tb USB external hard drive which I want to use to backup data from my home and office desktops (both running Linux). Should I format the drive (possibly split into a few partitions) as vfat or ext3? I don't anticipate using the drive with Windows very often so this is not a primary concern. The main thing holding me back from just using ext3 is the problems you can have when two different users (home and work accounts) try to access each others data. Is there any way to mount an ext3 drive with user id mapping?

  Read the article

• Make a drive from one machine appear as a physical disk in another machine.

  - by Roberto Sebestyen

  I want to take a physical disk (or part of a disk) in one machine (call it machine-A) and I want to make it available in another machine (machine-B). But I don't want to map a network drive. I want it to appear in machine-B as a physical drive. Even though it is not a physical drive. The reason I want to do this is i want the ability to create shares in machine-B on that drive. Since I cannot do that on mapped drives, I need to use some utility that fools machine-B to think that it is a physical drive, and treat it as such. Both of these machines are windows server 2003. I heard about NFS, It sounds like what could be the solution to my problem. But isn't that a Linux/Unix protocol? What tools can I use to make this happen? Are there any open source solutions? I don't care what the solution is, as long as it achieves the end result, preferably open source solution though. Thanks for reading guys and gals!

  Read the article

• Viruses on external hard drive -- how to clean files?

  - by Jade

  Last year my Dell laptop caught some pretty nasty viruses; I saved all my important stuff on an external hard drive. In an unrelated turn of events, I replaced my Dell with a Mac and have been able to retrieve data from the hard drive without trouble. The problem is, I'm sure the hard drive has a few lingering viruses and I really don't want to infect any more PCs with it. I was planning to reformat it anyway, but I'd like to be able to save my files. Would transferring those files to my Mac and then scanning them for Windows viruses before throwing them back onto the newly reformatted hard drive be enough?

  Read the article

• Transfer hard-drive with windows XP to another computer. On booting, asks to activate xp

  - by Jesse

  I had an old computer sitting around that I have not been able to boot successfully. I moved the hard drive and placed it in my newer computer. If I boot linux, I can mount the XP hard-drive and access the files. If I try to boot from the XP hard-drive, it will boot, but it asks me to activate windows before proceeding. If I continue, I get the "activation window" with two images/icons(?) which are failing to load. Nothing else happens. The version of windows came with the original computer the hard-drive came from, so I'm not sure if I'm married to the broken computer (I hope not!). Is there anything I can do in order to boot into XP from the new computer?

  Read the article

• What's the best tool to use to automatically backup selected folders from Windows to my external hard drive?

  - by PhD

  I have a 1TB external hard drive and I'd like to periodically schedule backups of my "Libraries" in Windows to the external drive. I'd prefer if it could detect what files have changed and periodically transfer them to the drive instead of I having to do it manually. Is there a way in Windows 7 to do this automatically? If not, what are some external tools (preferably free) that I can use for this? EDIT: I've used Windows back-up and I find it restrictive for detecting changes and backing up automatically. That's all that I'm aware of. My WD hard drive had something for this but the application doesn't work any more and it wasn't that good either. So, I wish to know what are my options.

  Read the article

• Could replacing an old hard drive's circuit board make it work again?

  - by oscilatingcretin

  I have a 12-year-old, 10gb Maxtor drive that died on me around 7 years ago, but I have not had the heart to throw it away. When the computer powers on, it whirrs silently as it tries to spin up and then it stops. So, a few years ago, I sent it off for professional data recovery. They were able to retrieve quite a bit from it, but I know there's a bunch more there. It only cost $700, so I just chalked up the lackluster recovery effort to "you get what you pay for" considering that most companies will charge you several thousands of dollars for this kind of data recovery. When they sent the drive back, I couldn't help but plug it back in just to see if maybe they unjammed something in the process of disassembling/reassembling the drive. To my surprise, the drive had a much healthier spin-up sound and actually stayed spinning for several minutes before winding down to a halt. Windows is even able to detect and interact with the drive, but I get I/O errors after so many minutes of waiting for it to mount. Before I start doing stupid stuff with it like dropping it on the ground, freezing it, crapping on it, etc, I decided to buy the exact same model off Ebay so that I could swap the circuit boards as a last-ditch effort. While it's en route, I thought I'd come here to ask if this is even a worthwhile effort and, if even remotely so, what should I know before ripping off the old board and slapping on the new?

  Read the article

• Make the recycle bin of the SSD on a RAID0 drive?

  - by Rolnik

  I don't know about you folks, but I hate the idea of junk sitting on my tiny 30GB SSD. Any way to designate another drive to be the host of the Recycle Bin for items formerly on the SSD? Basically, I need to know how to make a lower-priority drive receive the recycled materials from the 'main' drive, which happens to be short on space. The best thing I can think of is a batch file that a) syncs 'recycle' to another drive; and b) empties the recycle bin. ... but that's too much work for me.

  Read the article

• My USB bootable thumb drive, no longer boots on a single particular computer on which it previously worked

  - by LiamMeron

  I created a bootable drive, booting CrunchBang, about 2 months ago. About a month ago, I booted into it on another laptop. After shutting down, I have been unable to get it to boot on my own laptop, despite having worked previously. I can still boot into it on my desktop, and can also boot into it on all other computers that I have tried. If I plug it in when I am running Ubuntu, the Home and / folders mount, the only error being that for some reason my PC likes to try and mount the swap partition too, which naturally, gives an error. The BIOS settings are all still setup to boot from USB. When I boot, all I get is a black screen with the white cursor, it will stay there for as long as I leave it. If it is worth anything, I have GRUB loader installed on the drive. The partitions look a little odd, but I am rather unfamiliar with how they are dealt with. The first partition, /, is sdb1 and has the bootable flag. The second partition is an extended system, and is sdb2. The third partition, according to GParted, seems to be nested under the second. This is the swap partition, and it is sdb5 The fourth partition is my home partition and is sdb6 and is also nested under the extended system. The first and fourth partitions are ext4. I don't know if that helps, but the more info, the better accuracy, generally. Thanks. EDIT: I tried reinstalling GRUB on the drive, but that didn't work. However, when I reinstalled GRUB on my laptop, I did it with my USB thumbdrive in. This caused the GRUB updater to find the /boot folder and add the proper details into my laptop's GRUB loader. I could log into CrunchBang from my laptop's GRUB but I was still unable to boot directly to the drive. It looked like my BIOS is unable to find the bootloader. I am unable to install GRUB to a partition I just created, a /boot partition at the start of the drive, GRUB just doesn't allow it. I think I'm going to have to reinstall #! on my drive, which won't be a great loss as I haven't put much time into it.

  Read the article

• Windows 7 not detecting external hard drive but Ubuntu is detecting. Why?

  - by unlimit

  I have a 500 GB Toshiba external hard drive. Since yesterday Windows 7 stopped detecting it, however I do see it listed on the "Safely remove hardware and eject media" icon on the taskbar. Then I tried the same external hard drive on my Ubuntu and it detected it just fine. Ubuntu and Windows 7 are on the same laptop. I have dual boot. Can someone tell me why is it happening? Am I missing a driver in Windows 7? Additional info: This drive has worked perfectly fine in the past. I did not format this drive ever. It just stopped working yesterday in windows.

  Read the article

• Trying to format drive fails

  - by david

  since I will be doing an internship for which i need to use Windows software, I have decided to ruin my day trying to remove my Ubuntu 12.04, install Win XP SP3 (since the DualBoot theme from ubuntu suggests to first install Windows and then Ubuntu, for problems with the bootloader if you do it the other way around) and then reinstall Ubuntu 12.04 since I would like to keep using it as my primary operating system, using WinXP exclusively for the internship. Other than that, I would like to have a partition for the data, which can be used by both Ubuntu and Windows. So now, I have used the disk utility run from an ubuntu-live cd to format my drive with Master Boot Record (being conscious of the fact that this way I will lose all my data, which I have saved on an external drive before, and that my Ubuntu won't work anymore afterwards), creating partitions for Windows (NTFS), personal data (FAT, since as far as I know both Ubuntu and Windows can deal with this), a Swap partition for Linux, and one partition for Ubuntu (ext4); trying to install Win XP from cd gives me a blue screen, which stops the setup and telling me to remove all recently installed drives and to run CHKDSK. So I thought, that maybe Windows doesn't like pre-partitioned drives for its installation and thus I need to re-format my hard drive in order to have a completely "new" drive, which I can then, during the Windows-installation, partition in order to create the partitions I need. Trying to do this, though, the disk-utility run from the live-CD gives me this warning: Error creating partition table: helper exited with exit code 1: In part_create_partition_table: device_file=/dev/sda, scheme=0 got it got disk committed to disk BLKRRPART ioctl failed for /dev/sda: Device or resource busy I do not understand why it tells me that the hard-drive is busy, because, as stated above, I am doing all this from a live-CD. Thus, my questions are: How can I resolve the error given by the disk utility? Does it make sense to use four partitions in the way mentioned above? And if not so, which partitions should I create? Can I, theoretically, partition my drive from an Ubuntu live-cd in order to create the partitions I want and to install first Windows and then Ubuntu? Thanks for any help, David

  Read the article

• External USB Drive

  - by ErocM

  I have a server that I hooked up an external USB drive. It was formatted in windows and has files on it already. I'm new to Ubuntu so please be patient... I have two questions: Will Ubuntu see the drive since it was formatted in windows? How do I mount this drive or rather, how do I know it's seen by Ubuntu? Thanks! I did fdisk -l and this is what I have but I don't see it. It's a 1tb drive: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0001eb47 Device Boot Start End Blocks Id System /dev/sda1 * 2048 499711 248832 83 Linux /dev/sda2 501758 625141759 312320001 5 Extended /dev/sda5 501760 625141759 312320000 8e Linux LVM Disk /dev/sdc: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sdc doesn't contain a valid partition table Disk /dev/sdb: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sdb doesn't contain a valid partition table Disk /dev/mapper/ubuntu-root: 316.6 GB, 316577677312 bytes 255 heads, 63 sectors/track, 38488 cylinders, total 618315776 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/ubuntu-root doesn't contain a valid partition table Disk /dev/mapper/ubuntu-swap_1: 3217 MB, 3217031168 bytes 255 heads, 63 sectors/track, 391 cylinders, total 6283264 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 this is an external USB hard drive not a thumb drive :)

  Read the article

< Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >