Search Results

Search found 3433 results on 138 pages for 'i wonder'.

Page 103/138 | < Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >

  • Custom HTTP Status Codes (a la Twitter 420: Enhance Your Calm) [migrated]

    - by Max Bucknell
    I'm currently implementing an HTTP API, my first ever. I've been spending a lot of time looking at the Wikipedia page for HTTP status codes, because I'm determined to implement the right codes for the right situations. Listed on that page is a code with number 420, which is a custom code that Twitter used to use for rate limiting. There is already a code for rate limiting, though. It's 429. This led me to wonder why they would set a custom one, when there is already a use case. Is that just being cute? And if so, then which circumstances would make it acceptable to return a different status code, and what, if any problems may clients have with it? I read somewhere that Mozilla doesn't implement the joke 418: I’m a teapot response, which makes me think that clients choose which status codes they implement. If that's true, then I can imagine Twitter's funny little enhance your calm code being problematic. Unless I'm mistaken, and we can appropriate any code number to mean whatever we like, and that only convention dictates that 404 means not found, and 429 means take it easy.

    Read the article

  • Set up WLAN in 3-level house

    - by Balint Erdi
    I'm having a hard time setting up the network in our house. It has three levels (basement, ground floor, first level). The WLAN is set up by an ASUS RT-N12 router which provides perfect coverage for the ground floor and the basement. However, I set up my "home office" in the basement where the signal barely arrived. So I purchased a TP-Link TL-WA901ND (300 Mbps) Access Point which I set up in the other corner of the ground floor to expand the ASUS router's range. I used the AP's Repeater mode for that. The distance between my computer and the TP-Link AP is 6-7 meters. There is a staircase going down from the ground floor to the basement so there are no solid walls between the computer and the AP. This setup mostly works (I am writing this from the basement) but it is not reliable (the signal strength sometimes goes down to ~40% of the max) sometimes so I wonder if I am doing it correctly or if there is a better way. Screenshot of the router's and the AP's dashboard screen follow: Any comments on what I am doing wrong or hints for improvement are appreciated. Thank you. UPDATE Tried one more thing, setting up the TP-LINK AP in Access Point mode. That way, I can make it use a different SSID. I enabled WDS/Bridge so that it expands the range of the ASUS router (see screenshot). That does not work, either, if I connect to the network set up by the TP-LINK device (PELSTER-2), I can't reach the external network (the Internet). It seems the problem always comes back to this, the TP-LINK does not have access to the external network, whatever its mode of operation.

    Read the article

  • can't properly shutdown ubuntu and sound problem on HP mini 311 netbook

    - by Viele
    hi, I recently bought a HP mini 311 netbook. I replaced its harddrive and installed ubuntu 10.04. Since then, I have encountered some very strange problem with its sound and shutdown/reboot. At times, when I start the computer, it will have no sound, on the GUI the sound is at max, but no sound is available. This sometimes also happen after after upgrades, hibernate, and toggling the wireless radio button. Strangely, when the sound is out the device will also refuse to be shutdown. If I shutdown the computer using the GUI, it will simply go back to the log in screen without actually shutting down. If I use "sudo shutdown 0", the computer will hang on the loading screen of the shut down process. I had to force the pc to shutdown by holding the power button down. usually (probably always) after I force a turn-off then start off again. the sound and shutdown become normal. I wonder if anyone have clues regarding to the cause of this problem. This the info about the computer: 1) installed ubuntu 10.04LTS RC, later upgraded to formal released version. 2) cat /proc/asound/version == "Advanced Linux Sound Architecture Driver Version 1.0.21." however, when doing 'alsaconf' the version displayed is 1.0.23 any help is appreciated. Thanks

    Read the article

  • problem with .Net xml importnode in powershell

    - by Trondh
    Hi, Im trying to construct a powershell script that uses some XML. I have a XML document where I try to add some values with email addresses. The finished xml document should have this format: (I'm only showing the relevant part of the xml here) <emailAddresses> <value>[email protected]</value> <value>[email protected]</value> <value>[email protected]</value> </emailAddresses> SO, in powershell I try to do this as a test, which fails: $newNumber = [xml] '<value>555-1215</value>' $newNode = $Request2.ImportNode($newNumber.value, $true) $emailnode.AppendChild($newNode) After some reading, I have figured out that if I do this, it suceeds: $newNumber = [xml] '<value name="flubber">555-1215</value>' $newNode = $Request2.ImportNode($newNumber.value, $true) $emailnode.AppendChild($newNode) So, I am stuck. I'm starting to wonder if I should use another function instead of importnode when I have several keys with the same name but different values. As you guys probably have figured out by now, i'm not an expert in xml. ANy help appreciated!

    Read the article

  • System32 files can be deleted in Windows 2008 but not in Windows 2003 [closed]

    - by Harvey Kwok
    I have been using Windows 2003 for a long time. There is a wonderful feature. I don't know the name of it but the feature is like this. You can rename or delete some important files inside C:\windows\system32. e.g. kerberos.dll. After a while, the deleted files will be automatically recovered. I think this is because those files are criticl enough that Windows cannot survive without them. However, in Windows 2008, this feature is gone. Instead, all the files in System32 are owned by TrustedInstaller. However, as a administrator, I can still take the ownserhip of the files and then delete them. Windwos 2008 won't recover the deleted files and hence the system is screwed next time it's reboot. So, I wonder why Windows 2008 dropping that wonderful feature. Was that auto-recovery feature also suffer from some issues? Does Windows 2008 have some other features that can prevent this type of disaster from happening?

    Read the article

  • Varnish configuration, NamevirtualHosts, and IP Forwarding

    - by Brent
    I currently have a bunch of NameVirtualHost based websites, load balanced between 3 apache2 servers using ldirectord. I would like to insert varnish as a reverse-web-proxy between ldirectord and apache in the following way: a request comes in to ldirectord it is then load balanced between the 3 apache2 servers and varnish, with a weight of 1 for the webservers, and 99 for varnish (so if varnish is rebooted, the webservers will take over seamlessly) varnish will then load balance its requests between my apache2 servers. However, the varnish part is not working. I wonder whether this has to do with the fact that my apache servers use x.x.x.x:80 for their NameVirtualHosts, instead of *:80? (they have to do this, since each server hosts multiple IP addresses) Or perhaps it has to do with the need for IP Forwarding to be set up on the varnish server? (I did echo 1 /proc/sys/net/ipv4/ip_forward on this server, is that sufficient?) How can I debug this problem? ldirectord doesn't produce logs of what it does with each request (and if it did, I would be overwhelmed with information since I'm serving hundreds of requests per second) varnish log shows the ldirectord server connecting to it every 5 seconds, but nothing else. I have set up a test site using this configuration, but it fails - no apache access logs, no applicable varnish logs.

    Read the article

  • What is Best storage servers infrastructure ? DAS/NAS/SAN or installing GlusterFS/LUSTER/HDFS/RBDB

    - by TORr0t
    I am trying to design an infrastucture for the project I am working on. It would be somehow a file-sharing/downloading project (like rapidshare) and I would need high storage sizes and good scability, and I would add new storage nodes after my project grows up. I have come up with 3 solutions for my project which are using Luster, GlusterFS, HDFS, RDBD. For start, i would have 2 servers, one server is for glusterfs client + webserver + db server+ a streaming server, and the other server is gluster storage node. (After sometime, i would be adding more node servers, and client servers (dont know how many new client new servers to add, will see later) So, i am thinking to work with glusterfs. But i really wonder that if i have to use high performance servers with high sotrage sizes or avarage/slow servers with high storage sizes? Or nas/das/san solutions are better for glusterfs storage nodes? I might buy a nas and install glusterfs onto it. I would be happy to listen to your recommendations for the server properties (for each clients and nodes) . I really dont know if I really need high amount of ram and good cpus to for the nodes. I am sure i need it for client servers. The files would be streamed as well, so the Automatic file replication is important, thus, my system should work like a cloud, when needed, according to high traffic, the storage nodes should copy the most demanded file to be streamed and would help me to get rid of scability problems and my visitors would able to stream/download those files. Also, i am open to your experiences/thoughts about any good solution. Luster, hdfs, rbdb are the other options and i would be happy to listen to your thoughts here. I would be very very happy to hear back from anyone commented of any words I have used here. Thanks

    Read the article

  • HTML tabindex: Put some links last without complete enumeration

    - by Emanuel Berg
    I know I can use the HTML anchor attribute tabindex to set the tabindex of links, i.e., in what order they get focused when the user hits Tab (or Shift-Tab). But, I have a home page with tons of links, and to enumerate all those is a lot of work. The actual case is, I have four image links that by default gets index 1, 2, 3, and 4 (well, the behavior is equivalent, at least). But, I'd much rather have the first non-image link as number 1. Check it out here and you'll understand immediately. I tried to give the first non-image link (the link I desire to have tabindex 1) - I tried to give it tabindex 1 explicitly, hoping that it would cascade from there, but it didn't (i.e., the first image link got implicit tabindex 2). I also tried to give the image links ridiculously high tabindexes, but that didn't work: as the other links didn't have tabindexes at all, those highs were still "first". As a last resort (the solution currently employed) I gave the image links all tabindex -1. That makes for logical tabbing, but, it is suboptimal, as those image links are excluded from the tab loop - a user tabbing away will probably never realize that the images are clickable. I'd like them to be reachable with tabbing, but last, after all the ordinary links. If you wonder why I'm so determined to achieve this, it has to do with my own finger habits: I almost exclusively search for links, tab back, tab forth, etc., and very seldom using the mouse. Note: I'll accept a script to change the actual HTML for a complete enumeration, if you convince me there is no "set" way to solve this problem.

    Read the article

  • Interrupted system call during "hg convert"

    - by Aaron Digulla
    When I run "hg convert" to convert a Subversion repository to Mercurial, I get this error: fetching revision log for "/trunk" from 1538 to 0 run hg sink post-conversion action Traceback (most recent call last): File "/usr/lib/pymodules/python2.6/mercurial/dispatch.py", line 46, in _runcatch return _dispatch(ui, args) File "/usr/lib/pymodules/python2.6/mercurial/dispatch.py", line 454, in _dispatch return runcommand(lui, repo, cmd, fullargs, ui, options, d) File "/usr/lib/pymodules/python2.6/mercurial/dispatch.py", line 324, in runcommand ret = _runcommand(ui, options, cmd, d) File "/usr/lib/pymodules/python2.6/mercurial/dispatch.py", line 505, in _runcommand return checkargs() File "/usr/lib/pymodules/python2.6/mercurial/dispatch.py", line 459, in checkargs return cmdfunc() File "/usr/lib/pymodules/python2.6/mercurial/dispatch.py", line 453, in <lambda> d = lambda: util.checksignature(func)(ui, *args, **cmdoptions) File "/usr/lib/pymodules/python2.6/mercurial/util.py", line 386, in check return func(*args, **kwargs) File "/usr/lib/pymodules/python2.6/hgext/convert/__init__.py", line 229, in convert return convcmd.convert(ui, src, dest, revmapfile, **opts) File "/usr/lib/pymodules/python2.6/hgext/convert/convcmd.py", line 398, in convert c.convert(sortmode) File "/usr/lib/pymodules/python2.6/hgext/convert/convcmd.py", line 312, in convert parents = self.walktree(heads) File "/usr/lib/pymodules/python2.6/hgext/convert/convcmd.py", line 109, in walktree commit = self.cachecommit(n) File "/usr/lib/pymodules/python2.6/hgext/convert/convcmd.py", line 267, in cachecommit commit = self.source.getcommit(rev) File "/usr/lib/pymodules/python2.6/hgext/convert/subversion.py", line 433, in getcommit self._fetch_revisions(revnum, stop) File "/usr/lib/pymodules/python2.6/hgext/convert/subversion.py", line 814, in _fetch_revisions for entry in stream: File "/usr/lib/pymodules/python2.6/hgext/convert/subversion.py", line 122, in __iter__ entry = pickle.load(self._stdout) IOError: [Errno 4] Interrupted system call abort: Interrupted system call Apparently, it is possible to restart a read on EINTR but how would I do that with pickle.load()? Also I wonder where that signal comes from? I suspect it's SIGCHILD but shouldn't popen() handle that?

    Read the article

  • Sniffing at work- How to detect

    - by coffeeaddict
    Because of the place I work has some real issues (people) especially in IT and the owner, I wonder if we are being sniffed. Is there any way to tell if on a Vista 64-bit machine: 1) In system logs some identification that would tell me that someone might log into my PC such as an Admin 2) Something in the logs that would give me a flag about maybe I'm being monitored some other way? 3) How can I be sure that my gmail, hotmail, and chat is not being sniffed. I know there are things like Simp, etc. I'm talking about specific hidden system signs either in registry or logs. Obviously I'm not going to raise any suspicion by me asking our network admin. I don't trust anyone at this company. is there a good way to basically monitor for this as an end user? Could someone log in and basically watch me work and if so, would there be any goodies left behind for me to find out if this has happened other than visual signs which would not be present...maybe some running processes?

    Read the article

  • The bottlenecks of any computer, what to look for?

    - by WebDevHobo
    Whether it is a laptop or a desktop, any computer is made up of several pieces of hardware that communicate with each other. Sending data back and forth to ensure that the user gets the desired results. I have seen some theoretical stuff on computers & hardware, but I wonder how it all comes together. CPU RAM Graphics Card L1 CACHE L2 CACHE L3 CACHE FSB ... And all other things. Which is the biggest bottle neck? Why would a person not want/need a big value in one of those categories in certain situations? P.S.: when reading the specs of the i5 750 processor, I came across this description: In place of the FSB, one or more high speed, point-to-point buses called Quick Path Interconnect (QPI) are used, formerly known as Common Serial Interconnect Bus or CSI. QPI features higher bandwidth than the traditional FSB and is better suited to system scaling. What is this, and how does it compare to FSB? EDIT: I am not planning to buy a computer at all. The goal of this question is to understand the internal relation of various hardware pieces, their specific functions and how they work together. For instance, I have heard to a somewhat higher-than-usual amount of L2/L3 Cache can help speed up your computer. What's up with saying that? Also I forgot to mention Hard-disk RPM.

    Read the article

  • cpu load measure with hyperthreading on linux

    - by dronus
    How can I get the true usage of a multicore hyperthreading enabled cpu? For example lets consider a 2 core CPU, expressing 4 virtual cores. A single threaded workload would now show up as 100% in top, as one core of the virtual cores is completely used. The CPU and top work as expected, like there would be 4 real cores. With two threads however, the things get arkward: If all works well, they are balanced to the two real cores, so we got 200% usage: Two times 100% and two idle virtual cores, and are using all of the available CPU power. Seems ok to me. However, if the two threads would run on a single real core, they would show up as using two times 100%, that makes 200% virtual core usage. But on the real side, that would be one core sharing its power on the two threads, which are then using only one half of the total CPU power. So the usage numbers shown by top can not be used to measure the total CPU workload. I also wonder how hyperthreading balances two virtual on a real core. If two threads take a different amount of cycles, would the virtual cores 'adapt' so that both show a 100% load even if the real load differ?

    Read the article

  • IIS FTP 7.5 Data Channel Problem (SSL)

    - by user59050
    Hey there I wonder if anyone can get me in the right direction. I am setting up both a FTPS Client and Server, FTPS Server using Microsoft’s iis FTP 7.5. On the client side it will be running on Linux and I am using M2crypto for the openssl wrapping (python). I am worried the problem is on the server side (iis7.5) due to the following discovery : If I host using Filezilla with BOTH the control and data channel being forced to be encrypted it works 100% (100% file transmission), if i use iis as the server everything works up to the point when the data channel takes over... i.e. all data of the retrieved file is already received correctly in my basket! The ftp server just won't send the final '226 Transfer complete.' on the cmd socket. Why? If i force the client or server to close the connection the file is 100% intact....If i use iis 7.5 with forced encryption on control channel all works 100% as long as i don’t force data channel... Here are some screenshots to demo this... Client View after Kill Client : pics @ http://forums.iis.net/p/1172936/1960994.aspx#1960994 Summary : We can establish the connection, do directory listings, start the upload, see the file (0bytes) created on the server but then the client hangs. If we terminate the client, the uploaded file on the server suddenly jumps up to full size.

    Read the article

  • Incorrect deployment of WSGI app to AWS using Elastic Beanstalk

    - by Dzmitry Zhaleznichenka
    cross-link to AWS forums I have developed a simple Python web service using WSGI and would like to deploy it to AWS cloud using Elastic Beanstalk. My problem is I cannot make all the options I specify in Elastic Beanstalk configuration to be correctly configured in the cloud. For deployment, I use Elastic Beanstalk CLI utility. I have run eb init command and set up the required parameters. After this, a directory named .elasticbeanstalk was created in my source tree. It has two config files that are used for deployment, namely config and optionsettings. The latter one among the other options contains the WSGI configuration that has to update /etc/httpd/conf.d/wsgi.conf at the instances. After some of my adjustments the file has the following settings: [aws:elasticbeanstalk:application:environment] DJANGO_SETTINGS_MODULE = PARAM1 = PARAM2 = PARAM4 = PARAM3 = PARAM5 = [aws:elasticbeanstalk:container:python] WSGIPath = handler.py NumProcesses = 2 StaticFiles = /static= NumThreads = 10 [aws:elasticbeanstalk:container:python:staticfiles] /static = static/ [aws:elasticbeanstalk:hostmanager] LogPublicationControl = false [aws:autoscaling:launchconfiguration] InstanceType = t1.micro EC2KeyName = zmicier-aws [aws:elasticbeanstalk:application] Application Healthcheck URL = [aws:autoscaling:asg] MaxSize = 10 MinSize = 1 Custom Availability Zones = [aws:elasticbeanstalk:monitoring] Automatically Terminate Unhealthy Instances = true [aws:elasticbeanstalk:sns:topics] Notification Endpoint = Notification Protocol = email It turns out that not all of these options are considered when I start the environment or update it. Thus, when I update NumThreads or NumProcesses, the respective parameters get changed in wsgi.conf as expected. But whatever I write to the WSGIPath and StaticFiles parameters, I'm not able to automatically change the respective values of wsgi.conf, they remain Alias /static /opt/python/current/app/ WSGIScriptAlias / /opt/python/current/app/application.py which drives me nuts. Moreover, when I deploy my application using git aws.push and having the following contents of .ebextensions/python.config file, neither of options I specify in it affects the deployment. option_settings: - namespace: aws:elasticbeanstalk:container:python option_name: WSGIPath value: mysite/wsgi.py - namespace: aws:elasticbeanstalk:container:python option_name: NumProcesses value: 5 - namespace: aws:elasticbeanstalk:container:python option_name: NumThreads value: 25 - namespace: aws:elasticbeanstalk:container:python:staticfiles option_name: /static/ value: app/static/ I wonder what I should do to force AWS use all the parameters I specify in the configuration, namely the WSGI Path and path to my static data.

    Read the article

  • Choosing a new laptop

    - by chiongms
    I'm looking for a new laptop. I saw few: i) HP ProBook 4321s ii) HP ProBook 6440b iii)Dell Latitude E6410 i found these laptops are still very new..is it? not much comments about them. can anyone help? i doubt how their graphic cards perform compare to each other? ProBook 4321s- Radeon HD4350 ProBook 6440b- Radeon HD4550 Latitude E6410- NVS 3100M most of the time i'll running 3D CAD software, C++ programing...i saw my friend's laptop with radeon HD4350. it's perfectly fulfilling my demand. but i wonder how the other two are? Another thing i doubt is the screen resolution..my current laptop is 1280x800, and i found it comfortable to use. But these two HP only offer 1366x768..will it make any large different? Lastly, is there anyway to estimate how their power consumption is from the spec sheet? well, i would prefer one with longer battery usage time. my current laptop is suck...only last 1 hour even when it's still new..i'm not going to get another like this anymore. Anyone can help me please? Thanks!

    Read the article

  • Home server hard drive: 186k start-stop cycles in 325 days?

    - by j-g-faustus
    I set up a home server about a year ago, using Ubuntu server (10.04 LTS at the moment), four disks in RAID 5 for storage (WD Green 1.5 TB) and a laptop drive for the OS. Today the output of smartctl, a command line utility for checking the SMART attributes of a hard drive, tells me that the primary OS drive has had no less than 186,000 start-stop cycles in 325 days and may be nearing the end of its lifespan. The smartctl output is in "normalized values", in this case a number between 200 and 000, where 200 is "brand new" and 000 means "worn out". My disk gets 001. So I wonder what happened: 186k start/stop cycles in 7820 hours is about one start/stop per 2.5 minutes around the clock. This seems somewhat excessive for a computer that sees actual use once or twice per day. (The RAID disks are normal, averaging to one start/stop per day, as expected.) Does anyone have similar experiences, or pointers to what might be the issue here? Specifically I'd like to know Why the massive start/stop count? Do I have some sort of configuration issue? Could there be a background service that is causing trouble? Could having a laptop disk as the OS drive be part of the problem? Can anyone confirm or deny this? Here is the /etc/hdparm.conf configuration /dev/sda { apm = 127 spindown_time = 120 } and the most relevant parts of smartctl --attributes /dev/sda: smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 001 001 000 Old_age Always - 185875 9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 7820 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 109 193 Load_Cycle_Count 0x0032 118 118 000 Old_age Always - 246833 194 Temperature_Celsius 0x0022 107 098 000 Old_age Always - 36 As I generally prefer my drives to last more than a year, any advice is appreciated.

    Read the article

  • Cache updates when migrating DNS from one provider to another

    - by JohnCC
    This may be a Windows DNS specific question or a general DNS best practice question - I'm not sure! We migrated our 3rd party DNS provision from provider A to provider B. I noticed that our internal recursive windows DNS servers still had NS records cached for our domains pointing to provider A's servers, even though I changed the nameservers with our registrar several days ago, and even though selecting the properties of the cached records showed a TTL of 1 day. After 24 hours when the NS records in this cache have expired, will the DNS server go back to the TLD server for an update on the authority, or will it go by preference to dns1.providera.com since that is what it has cached? In this case I arranged to leave Provider A's servers up for a week to allow changes to propagate, so dns1.providera.com is still active and would still provide NS and SOA records that said that dns1.providera.com. was in charge of this domain. Given this fact, would the Windows DNS server ever go back to the TLD and pick up the authority changes, or would it just assume all was well and renew timestamps on its cached NS records? I wonder what would be the best approach to ensuring that caches pick this up. Should I:- (1) Leave Provider A's servers in place and active and wait for caches to catch up ... basically what we're doing now which seems to have issues - perhaps specifically for Windows servers, or perhaps more widely. (2) Leave Provider A's servers in place but change the NS and/or SOA information they provide to tell caches that new servers are in charge. (3) Remove Provider A's servers after 2*TTL to force remaining caches to update. The issue with (2) is that on Provider A's system I can't seem to change the NS or SOA information to anything other than their servers. The issue with (3) is that I'm not sure how a DNS server would behave in this case. When it couldn't reach the cached name servers, would it flush its cache and try a full recursive lookup, or would it just return an error, forcing the user to clear the cache manually? Thanks in advance!

    Read the article

  • performance wise htaccess

    - by purpler
    hese's the my htaccess template, i wonder if anything could be added to increase website performance.. # Defaults AddDefaultCharset UTF-8 DefaultLanguage en-US ServerSignature Off FileETag None Header unset ETag Options -MultiViews #Options All -Indexes # Force the latest IE version or ChromeFrame <IfModule mod_setenvif.c> <IfModule mod_headers.c> BrowserMatch MSIE ie Header set X-UA-Compatible "IE=Edge,chrome=1" env=ie </IfModule> </IfModule> # Proxy X-UA Setup <IfModule mod_headers.c> Header append Vary User-Agent </IfModule> #Rewrites Options +FollowSymlinks RewriteEngine On RewriteBase / # Redirect to non-WWW RewriteCond %{HTTPS} !=on RewriteCond %{HTTP_HOST} ^www\.(.+)$ [NC] RewriteRule ^(.*)$ http://%1/$1 [R=301,L] # Redirect to WWW RewriteCond %{HTTP_HOST} ^domain.com RewriteRule (.*) http://www.domain.com/$1 [R=301,L] # Redirect index to root RewriteRule ^(.*)index\.(php|html)$ /$1 [R=301,L] # Caching ExpiresActive On ExpiresDefault A0 Header set Cache-Control "public" # 1 Year Long Cache <FilesMatch "\.(flv|fla|ico|pdf|avi|mov|ppt|doc|mp3|wmv|wav|png|jpg|jpeg|gif|swf|js|css|ttf|eot|woff|svg|svgz)$"> ExpiresDefault A31622400 </FilesMatch> # Proxy Caching <FilesMatch "\.(css|js|png)$"> ExpiresDefault A31622400 Header set Cache-Control "private" </FilesMatch> # Protect against DOS attacks by limiting file upload size LimitRequestBody 10240000 # Proper SVG serving AddType image/svg+xml svg svgz AddEncoding gzip svgz # GZip Compression <IfModule mod_deflate.c> <FilesMatch "\.(php|html|css|js|xml|txt|ttf|otf|eot|svg)$" > SetOutputFilter DEFLATE </FilesMatch> </IfModule> # Error page ErrorDocument 404 /404.html # Deny access to sensitive files <FilesMatch "\.(htaccess|ini|log|psd)$"> Order Allow,Deny Deny from all </FilesMatch>

    Read the article

  • nginx server over https using up all available file handles

    - by mmr
    Hi all, So I have an nginx server that's working over https with Sinatra. When I try to download a jnlp file in a configuration that works fine over Mongrel and http (no s), the nginx server fails to serve the file with a 504 error. Subsequent checking of the logs states that this error is due to overflowing the available number of file handles, ie, "24: too many open files". Running sudo lsof -p <nginx worker pid> gets me a huge list of files, all looking like: nginx 1771 nobody 11u IPv4 10867997 0t0 TCP localhost:44704->localhost:https (ESTABLISHED) nginx 1771 nobody 12u IPv4 10868113 0t0 TCP localhost:https->localhost:44704 (ESTABLISHED) nginx 1771 nobody 13u IPv4 10868114 0t0 TCP localhost:44705->localhost:https (ESTABLISHED) nginx 1771 nobody 14u IPv4 10868191 0t0 TCP localhost:https->localhost:44705 (ESTABLISHED) nginx 1771 nobody 15u IPv4 10868192 0t0 TCP localhost:44706->localhost:https (ESTABLISHED) nginx 1771 nobody 16u IPv4 10868255 0t0 TCP localhost:https->localhost:44706 (ESTABLISHED) nginx 1771 nobody 17u IPv4 10868256 0t0 TCP localhost:44707->localhost:https (ESTABLISHED) nginx 1771 nobody 18u IPv4 10868330 0t0 TCP localhost:https->localhost:44707 (ESTABLISHED) nginx 1771 nobody 19u IPv4 10868331 0t0 TCP localhost:44708->localhost:https (ESTABLISHED) nginx 1771 nobody 20u IPv4 10868434 0t0 TCP localhost:https->localhost:44708 (ESTABLISHED) Increasing the number of files that can be opened is no help, because then nginx just blows right past that limit. And no wonder, it looks like it's in some kind of loop to pull all available files. Any idea what's going on, and how to fix it?

    Read the article

  • PC powers off at random times

    - by Timo Huovinen
    Short Version After experiencing some problems with Mobo batteries my PC started to power off at random times, the power off is instant and sudden and does not restart afterwards, need help figuring out the cause. Facts: Powers off when PC is playing games Powers off when PC is idle Powers off when PC is in safe mode Powers off when PC is in BIOS Powers off when PC is booted through a Windows installation USB Replaced the motherboard battery several times Replaced the 650W PSU with a 750W PSU Replaced the RAM Swapped the RAM between slots Re-applied thermal paste to the CPU Checked if the motherboard touches the case Nothing is overclocked PC Specs PC specs: OS: Windows 7 Ultimate SP1 RAM: klingston 1333MHz 4GB stick CPU: AMD Phenom II x4 955 Mobo: Gigabyte 88GMA-UD2H rev 2.2 Motherboard battery: CR2032 3v HDD: 500GB Seagate ST3500418AS ATA Device Graphics: ATI/AMD Radeon HD 6870 Very Long version Around 10 months ago I built a brand new gaming PC. Around 6 months ago it's time setting in windows started resetting to the year 2010. I swapped the Motherboard battery for a new one of the exact same size and shape and voltage, and the problems disappeared...for around 2 weeks. Then the same problem happened again, time gets reset, I swapped the battery again, and the problem was gone for good and everything was great for about 3 months.. then another problem started happening, the PC started to power off suddenly and without warning at completely random times, sometimes the PC works for and hour, sometimes 5 minutes. So I read on the forums that it might be either the PSU or the motherboard Battery or RAM or HDD or the Graphics card or the CPU or the motherboard or the drivers or a Virus or Grounding issues, or something short circuiting, basically it can be anything... I spent some days researching, and decided to remove the possibility of a virus. I reset the CMOS, cleared all BIOS settings and reinstalled windows 7 after a full format of the HDD, but the random power off kept happening. I then disabled the restart on error option in windows and looked at the event log for error events, but they did not help me figure out the problem. Network list service depends on network location awareness the dependency group failed to start Source Kernel Power Event 41 Task Category 63 Source Disk Event ID 11 Task Category None The driver detected a controller error on device disk I took apart the PC, every little piece, re-applied some expensive thermal paste to the CPU, and double checked that none of the pieces are touching the PC case. The problem was gone, the PC no longer powered off randomly I re-attached the graphics card and all was good for 4 months... then the power off problem appeared again, but was happening at high intervals, the PC would shutdown once in 2 days on average, at random points in time, sometimes when it's idle all day long, sometimes when it's running CRYSIS 2. I checked the CPU temperature, because I know that AMD CPU's have a built in protection mechanism that switches off the PC if the CPU gets too hot, and the Temp was 50C system temp, and 45C CPU after running the PC all day long (I did not do tests to see if there are any temperature spikes, don't know how to do them) Originally the PSU that powered the PC was 650Watts and had one 4 pin cable to power the CPU, I replaced it with a new 750Watts PSU which has two 4 pin cables for the CPU, but the problem remained. I removed the graphics card and let the motherboard use the built in one, but the PC kept suddenly powering off at random times. I took apart the PC completely again, and re-applied thermal paste to the CPU, added lots of insulation, and checked for any type of short-circuit possibility again and again, but the problem remained. The problem was like that for some months. I replaced the Battery a couple of times over the time, changed lots of options in windows, and tried everything I could, but it kept powering off, so I stopped using the PC as much as I used to, just living with the random power offs from time to time, until a couple of days ago, when the power off happens almost immediately after powering on the PC. I replaced the RAM with a brand new one, but that did not help. Took apart the PC again, checked for anything anywhere that might cause it, found some small scratches on the very edge of the motherboard to the left of the PCI express x16 slot. This might cause the problem, I thought, but the scratch looks very superficial, not deep at all, and if the scratch did harm the motherboard, wouldn't it cause it to not start at all? And why did it start to power off a while ago, and then suddenly stop powering off? The scratches could not have vanished??? did chkdsk \d but it powered off when it was at 75% I removed the hard disks, the graphics card, while I fiddled with the BIOS settings, and suddenly the PC shut down while I was looking at the BIOS version. This makes me realize, it is not caused by: HDD, Windows, Drivers or the Graphics card I cleared the CMOS again, updated the BIOS from F5 to F6f beta, but that did not help, it might even seem that the PC powers off even sooner. The shutdown even happened to me while I booted through a windows 7 installation USB and was in the repair console. I removed one of the cables powering the CPU, now only one 4pin cable powers it, and it worked for 30mins after doing that, which makes me think that it's the CPU overheating, and because it gets less power, it overheats slower? The things that I am still considering: CPU overheating (does not seem to overheat, maybe false readings?) Motherboard short circuiting (faulty motherboard?) I desperately need some advice in what is faulty, is it a faulty Motherboard or an overheating CPU? or maybe something else? I have been breaking my head over this problem over a span of 6 months. I'm not sure if this is a good place to ask this question, if it is not, then tell me where I can get some experienced help. More info I have also discovered a mysterious piece that seems to have fallen out of the motherboard i119.photobucket.com/albums/o126/yurikolovsky/strangepiece.jpg What is it? Looks like each time that it powers off the datetime gets reset I also found another forum post tomshardware.co.uk/forum/… except I don't have Integrated PeripheralsUSB Keyboard Function option in BIOS :S Comments summary (asked by Random moderator) Q. tell me, if the computer restarts, is it immediately? Does it take a second and then restarts? Do you see (BSOD) or hear (PSU, short circuit) any suspicious when it happens? After reading trough it, it remains the mainboard that is faulty. – JohannesM A. Immediate power off, all the fans stop instantly, all the light turn off instantly, no sound or anything, and it remains off until I turn it back on. Thanks for the feedback, faulty motherboard is what I fear. Q. Try stress-testing the system with Prime95 and see if errors or shutdowns occur when the CPU is under full load. – speakr A. Prime95 heat stress test peaked CPU heat at 60C after 5mins, it powered off after 30mins of testing in the middle of the test with no errors, Prime95 Heat test or the stress-testing with low RAM usage (small or in-place FFTs) do not report errors while testing for 10-60 mins. The power off does not seem like it is affected by Prime95 at all Makes me wonder if it's a CPU or Motherboard issue at all. Q. I had similar random/intermittent problems with my old board. It gave one of a few different symptoms: keyboard and/or mouse would die and/or the RAM wouldn't work and/or it would shut down. It was in bad shape. One problems was that my old PSU had literally burned the connector on it (browned around the pins), another was that a broken lead inside the layers of the PCB would work sometimes if it happened to be hot or if I bent the board—by jamming a hunk of wood behind it. I managed to keep the board alive for several years, but eventually nothing I did would make it work correctly anymore. – Synetech A. I will try that as the last resort, ok? ;) Q. Have you tried a different power cord, surge protector, outlet (on a different circuit). It's worth a shot just to ensure it's not subpar wiring or a week circuit (dips in power may cause shutdown if the PSU can't pull enough juice from the wall). – Kyle A. yes, I attached the PC to an entirely different outlet on a different circuit and the problem persists. After connecting it to a different outlet after starting the PC it gave me 3 long beeps and 1 short one, then the PC immediately proceeded to boot up normally. Q. Re-check your mainboard manual and all PSU connections to your mainboard to be sure that nothing is missing (e.g. 12V ATX 4-pin/6-pin connector). If you can provoke shutdowns with Prime95, then consider buying new hardware -- a stable system should run Prime95 for 24h without any errors. Prime95 mentions errors in the log when they occur and gives a summary after the stress test was stopped manually (e.g. "0 errors, 0 warnings", if all is fine) – speakr A. Re-checked, there are no more PSU connectors that I can physically connect, except the one ATX 4-pin (there are 2 that power the CPU) that I disconnected on purpose, I have reconnected it but the problem persists. Q. With one PC I had a short curcuit. The power button on the front plate had its cables soldered, but not isolated, and the contacts were very close to the metal case. A heavier touch was enough to cause a shutdown. The PC's vibration could be enough – ott-- A. yes, it seems to switch off with even the lightest touch, I switched on the PC, then pulled out the front panel power cable that connects to the motherboard so the power button does not work anymore, after 5 mins of working like that, with the power button completely disconnected, just sitting idle, the PC powered off again, I don't think it's the power button. Q. I wonder if you dare to operate components without the case, that is remove motherboard, power, disk ( just put the motherboard on a wooden desk). Don't bend the adapters when running like that. – ott-- A. yes, I do dare to do that, but only tomorrow, too tired/late right now.

    Read the article

  • How to find the real IP to which IPVS is routing a virtual IP

    - by Wayne Conrad
    I'm trying to find a problem server hiding behind a virtual IP (using LVS/ipvs). I've got a test program that sends requests to the virtual IP until it gets the bad response, but how can I tell to which real IP a request to the virtual IP got routed? On the box doing the virtual IP magic, here's the virtual IP configuration (for the service I care about): IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn ... TCP 10.1.0.254:5025 nq -> 10.1.0.5:5025 Route 1 0 1 -> 10.1.0.6:5025 Route 1 0 5 -> 10.1.0.7:5025 Route 1 0 2 -> 10.1.0.9:5025 Local 1 0 3 -> 10.1.0.11:5025 Route 1 0 3 ... My client program is sending TCP requests to 10.1.0.254:5025, usually getting a good response but sometimes a bad response. With this few servers, I could send my request to each server in turn until I discover the culprit, but I wonder if that technique will scale as we add servers. What means exist for me to find out where requests got routed? Kernel: Linux 2.6.32 OS: Debian testing (whatever that's called these days). ipvsadm is version 1.25, compiled with ipvs v1.2.1

    Read the article

  • Ubuntu: Tar doesn't work correctly

    - by Phuong Nguyen
    It looks like tar is having some problems. I installed Ubuntu 10.04 alpha a few of weeks ago. After that, this alpha version is so terrible that I must switched back to 9.10. So, I backed up all of my profiles data (/home/my_user_name) to my_user_name.tar.gz Here what I did: (in U10.04) Open Nautilus and goto /home/my_user_name Press Ctrl+H to view all hidden files. Press Ctrl+A to select all files Right click and choose [Compress...] Now, when I have set up Ubuntu 9.10 again, I extract the tar using Extract Here command from Nautilus. Funny things happened: Instead of extracting to current folder, the archive manager create a folder named my_user_name and put the extracted content into it. All of the files that I placed directly under /home/my_user_name doesn't get extracted All of the directories that started with . (dot) is not extracted. I wonder if there is any incompatibility between tar in U10.04alpha and U9.10 that cause the problem? Now every of my email, basket data is long gone. I'm freaking right now. Is there anything I can do to get the tar return back my data?

    Read the article

  • How to move my data from my old MacBook Pro to my new one?

    - by Tim Büthe
    I just purchased a new MacBook Pro and already got an 2008 model. I wonder how I move all my data over to the new one. My first idea was, to use my Time Machine backup and restore from it, which seems to be a good idea and should work just fine regarding to this link: http://blog.duncandavidson.com/2008/01/restoring-from-time-machine.html. But, since my current MacBook got older Software on it, like iLife '08 instead of iLife '09 I would have to upgrade this afterwards. Is this correct, or does Time Machine does some magic to exclude well known software? And is it possible to reinstall or upgrade iLife with the included installation DVDs? My second idea is, to just swap the hard drives instead of using the Time machine backup. If it is not too complicated to remove the hdd, this should be the fastest way. This also has the benefit, that the 2008er MacBook then contains a brand new installation and I don't have to remove all my stuff or reinstall Mac OS before I give it away. My question on that second idea would be: does snow leopard handle this stuff correctly? I reboot with the new hardware and all just works fine? So in a nutshell: What would you do: restore from backup or swap drives? And what about the new software?

    Read the article

  • Internet Explorer 8 Loses Cookies

    - by Mikeon
    I'm running Windows 7 for some time now and use Internet Explorer 8 as my main browser. What I've noticed is that it "loses" cookies A LOT! I mean it! Typical situation: I log in into a side checking the remember me checkbox. I reboot the computer/restart the browser, go to the site, get logged in automatically - I'm happy. From time to time however, I'm asked for the credentials. Normal situation you would say. So would I if it didn't happen few times a week. Come on! On Internet Explorer 7 I didn't notice this as much. Cookies were lost once a quarter or so. Note that i was using IE7Pro with my IE - dunno however if it has anything to do with my current problem. Anyway I wonder if this behavior is "normal" or is it only me? more info for people that suggest it may be normal - cookie expiring and stuff. When it happens I loose all auth cookies - gmail, bloglines and whatnot!

    Read the article

  • preformance wise htaccess

    - by purpler
    hese's the my htaccess template, i wonder if anything could be added to increase website performance.. # Defaults AddDefaultCharset UTF-8 DefaultLanguage en-US ServerSignature Off FileETag None Header unset ETag Options -MultiViews #Options All -Indexes # Force the latest IE version or ChromeFrame <IfModule mod_setenvif.c> <IfModule mod_headers.c> BrowserMatch MSIE ie Header set X-UA-Compatible "IE=Edge,chrome=1" env=ie </IfModule> </IfModule> # Proxy X-UA Setup <IfModule mod_headers.c> Header append Vary User-Agent </IfModule> #Rewrites Options +FollowSymlinks RewriteEngine On RewriteBase / # Redirect to non-WWW RewriteCond %{HTTPS} !=on RewriteCond %{HTTP_HOST} ^www\.(.+)$ [NC] RewriteRule ^(.*)$ http://%1/$1 [R=301,L] # Redirect to WWW RewriteCond %{HTTP_HOST} ^domain.com RewriteRule (.*) http://www.domain.com/$1 [R=301,L] # Redirect index to root RewriteRule ^(.*)index\.(php|html)$ /$1 [R=301,L] # Caching ExpiresActive On ExpiresDefault A0 Header set Cache-Control "public" # 1 Year Long Cache <FilesMatch "\.(flv|fla|ico|pdf|avi|mov|ppt|doc|mp3|wmv|wav|png|jpg|jpeg|gif|swf|js|css|ttf|eot|woff|svg|svgz)$"> ExpiresDefault A31622400 </FilesMatch> # Proxy Caching <FilesMatch "\.(css|js|png)$"> ExpiresDefault A31622400 Header set Cache-Control "private" </FilesMatch> # Protect against DOS attacks by limiting file upload size LimitRequestBody 10240000 # Proper SVG serving AddType image/svg+xml svg svgz AddEncoding gzip svgz # GZip Compression <IfModule mod_deflate.c> <FilesMatch "\.(php|html|css|js|xml|txt|ttf|otf|eot|svg)$" > SetOutputFilter DEFLATE </FilesMatch> </IfModule> # Error page ErrorDocument 404 /404.html # Deny access to sensitive files <FilesMatch "\.(htaccess|ini|log|psd)$"> Order Allow,Deny Deny from all </FilesMatch>

    Read the article

< Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >