Search Results

Search found 22877 results on 916 pages for 'network storage'.

Page 103/916 | < Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >

• refresh windows network performance counters in command line

  - by michalv82

  I am testing a USB device connected to a windows PC. When the device is connected then windows has another network interface going through the device. I need to get the bytes transffered for that specific interface, basically I need the data shown in the networking tab in the task manager for my interface adapter. I found this question which helped to get this info: ms windows network activity bytes send and receive in command line However I have a problem when I run multiple tests - each time I disconnect and connect the device there's another line for the interface, like below. In the task manager networking tab I only see one record for my interface but I don't know how I can know from command line which is the lastest and current instance (it's not like the first line or last line is always the current interface, I noticed it's not consistent): wmic path Win32_PerfRawData_Tcpip_NetworkInterface Get Name,PacketsReceivedPerSec,PacketsSentPerSec,BytesReceivedPersec,BytesSentPersec BytesReceivedPersec BytesSentPersec Name PacketsReceivedPersec PacketsSentPersec 422666370 6317989292 Intel[R] 82579LM Gigabit Network Connection 2715169 8109643 49150 375973 My USB Device 432 568 0 0 My USB Device _2 0 0 0 0 My USB Device _3 0 0 0 0 My USB Device _6 0 0 0 0 Local Area Connection* 9 0 0

  Read the article

• Wireshark Not Displaying Packets From Other Network Devices, Even in Promisc Mode

  - by eb80

  System Setup: 1. MacBook running Mountain Lion. 2. Wireshark installed and capturing packets (I have "capture all in promiscuous mode" checked) 3. I filter out all packets with my source and destination IP using the following filter ("ip.dst != 192.168.1.104 && ip.src != 192.168.1.104") 4. On the same network as the MacBook, I use an Android device (connecting via WiFi) to make HTTP requests. Expected Results: 1. Wireshark running on the MacBook sees the HTTP request from the Android device. Actual Results: 1. I only see SSDP broadcasts from 192.168.1.1 Question: What do I need to do so that Wireshark, like Firesheep, can see and use the packets (particularly HTTP) from other network devices on the same network?

  Read the article

• Establish direct cable connection between Windows 8 PCs in home network

  - by Marie. P.

  I'm running two PCs, a desktop and a laptop with Windows 8 Release Preview ("Build 8400"). They are connected to the same router in infrastructure mode, thereby having wireless internet. Due to often file synchronization between the machines I want to establish a cable connection that allows direct file transfer, without needing to use the wireless. When I plug in the cable (normal, not cross-over), I see in "Control Panel\Network and Internet\Network Connections": "Ethernet - unidentified Network" on both PCs. Transferring a file between both still only uses the WiFi via the Router. I noticed that when turning off the wifi on one PC, I can set up a shared internet connection that will work via Ethernet-cable, but since sometimes only one PC runs, sometimes the other one, I do not want to have the internet of one machine to be dependent on the other one being switched on. I do not have a crossover-cable, but since I did connect the PCs already successfully (just without both being on the internet), I'm sure that this should also work with a normal ethernet cable.

  Read the article

• Accessing VMware Player across the network

  - by Tiffany Walker

  My network: 192.168.2.2 (computer) 255.255.255.0 (mask) 192.168.2.254 (gateway) The VMplayer is: 192.168.233.129 (ip) 255.255.255.0 (mask) 192.168.233.255(bcast) It's obvious the player can't be access from other systems because of the wrong network settings. However, I am not sure as to how to change that. Obviously I have to edit the ifcg-eth0 but I know I also need to edit it on the host system to make it accessably. Is this done from inside VMware Player? Or do I need to edit the network devices? The host box is Windows. Inside VMware is Linux.

  Read the article

• Tunneling over IPv4 network

  - by JoesyXHN

  Hi, Most of the articles I have read about Tunneling. It describes that the tunneling supports for communication between 2 IPv6 networks over (crossing) an Ipv4 network. For example: TUNNEL A (IPv6) ==> INTERNET NETWORK (IPv4) => TUNNEL B (IPv6) Would it be doable for: TUNNEL A (IPv4) ==> INTERNET NETWORK (IPv6) => TUNNEL B (IPv4) Please give me an answer with elaborate explanation. Thanks in advance.

  Read the article

• VM's, virtual networks and my home network.

  - by Jason Taylor

  I want to create a small lab of VM's to test out networking with. I have two PC's running VMWare and I need the VM's on these two PC's to be connected to their own LAN. I am planning on bridging the VM's into my home network. My home network and PC's are in the 192.168.0.0 range, but I want my VM's to be in 10.1.0.0. If I do it this way (Bridging the VM's on both hosts into the network) will the VM's be able to communicate? Will my home router freak out seeing two different subnets? Is there another, easier way to connect the virtual lan's on two vmware workstations together?

  Read the article

• Oracle 11g network configuration

  - by Kylo

  Hi, I installed Oracle 11g Enterprise Edition on my Windows 7 Pro. My problem is that I cannot log into database from other host (local network). When I connect to database using Oracle SQLdeveloper everything is ok as long as I specify 'localhost' in connection configuration. However, when I change it to '192.168.0.190' which is my host IP address I get 'The Network Adapter could not establish the connection'. I get the same error when logging in from other host in local network. What is the problem?

  Read the article

• Block complete network access for one local user

  - by tumchaaditya

  Well, this is quite trivial question but I could not find a satisfactory answer even after trying many search queries both here and on Google. I want to share my PC with my room-mate. And I don't want him to access ANY network(LAN included). So, I can create an account for him and block network access for the same. I would prefer avoiding any third-party tools as far as possible. It's a simple home PC hooked up to a router for internet. No domain and other stuff. (Technically, guest account can achieve this. But somehow, the guest account on my PC has network access!)

  Read the article

• Stop Windows 7 from accessing or writing to hard drive unless "told" to by me? (More info inside...)

  - by Jeff

  A confusing question, perhaps, but bear with me. I have two internal HDDs set up in a RAID0 array which I use as mass storage. I access the drive very infrequently (once a day at most) and so I have set up Windows 7's power options to turn off idle disks after only 1 minute. This is fine, and the disks are turned off most of the time. However, I notice that Windows sometimes spins up the drives when I really, really don't want or need it to. This causes a 30 second delay as both drives spin up and lock up my system. Some examples of when this happens: 1) When I'm installing something using Windows Installer or Installshield; it seems to me as if they're using the drive with most available free space as the installer cache location... so my big RAID drive has to spin up! Most annoying. 2) Apparently, when I open a Java-based program which resides on my system drive and has nothing to do with my RAID drive! 3) At boot-up and shut-down time. At shutdown the drive spin up only for the computer to immediately shut down! Incredibly frustrating! I've already tried changing the letter of the drive, and at some points have removed the drive letter entirely, which solves the first two issues above. So my question (FINALLY!) is this: is there any way I can mark this drive as being for "storage only", so Windows basically does not see it at all until I actually invoke it somehow? Or is there any way I could set it up so that only specific programs have write access to it? For example, download managers, TeraCopy, etc. etc.? Basically I want it to be a "ghost drive" until I'm ready to use it and to stop Windows from spinning it up all the damn time! Thank you. :)

  Read the article

• I can't use a custom theme on a network account

  - by Rev

  I'm an administrator for the computer I use, but I'm using a network account. I can set custom themes (non-Microsoft, I mean) on my local account but not on the network account. It's the same machine, just different accounts/domains. I tried to repatch the files from the network account, but it says they're already patched. Any ideas why this won't work? The themes don't show up in the Personalize menu, and I can't just double click the .theme file from the Themes folder in Windows 7 Pro. This is the theme I'm trying to use, by the way: http://fediafedia.deviantart.com/art/Windows-8-VS-for-Win7-258514188?q=boost%3Apopular%20windows%208%20theme&qo=0 Tried repatching the files, still nothing.

  Read the article

• Network Share unavailable after DNS Change

  - by Justin Largey

  Hi, I have a server, called Server1 with various network shares on it. Our users map to this share using \\Server1\FileShareName1. During a DR Test, we rerouted all network traffic from Server1 to Server21. All folder shares are set up on Server21. We were hoping the the network shares would still be accessible using \\Server1\FileNameShare1, unfortunately, they are not. Does anyone know why this is happening? This is a Win2003 Environment, and DNS was flushed. I confirmed that IP addresses are matching between the two servers. Any help or insight is much appreciated.

  Read the article

• Automate Win8 network and sharing settings

  - by RafaelBarriola

  I am trying to create a unattended DVD installation of Windows 8, but I can't seem to find a solution do this. What I'm looking for are to have the same settings on the Network and Sharing Center, to have the Turn on network discovery "on" for both the private and guest/public within the Control Panel. For private and guest/public, I need to: Turn on network discovery Turn on printer and file sharing Turn off public folder sharing Turn on password protected sharing Use user accounts and passwords to connect to other computers I've been searching for days and have not found a solution yet.

  Read the article

• Connect to server in VMWare player while host is not connected to a network

  - by blockcipher

  Hello, I have a linux server VM on my host machine using VMWare player and if I'm on a network, I can connect to the web server on the VM via a web browser. However, I tried to do the same while I was disconnected from a network and I couldn't. The networking is set to Host-only and I did use dhclient/ifconfig to make sure that yes, I did have an IP address assigned to the VM. While I can work around this, the purpose of the VM is to allow us to demo our app from any machine and that machine may not be connected to a network. Thanks.

  Read the article

• Connecting via url to a server that is on the same network as me

  - by Axehead

  Good day, I'm having problems with the ftp server I've just set up. I've already managed to configure my modem and wireless router to open up port 21 and setup ftp in my server. But It seems that when I try to connect to it when I'm in the same network as the server via URL, (ftp://mydomain.com) it redirects me to the modem's web interface. But then when I try to connect to it outside the network using a different internet connection. It succeeds. It also succeeds when I'm in the same network and I go to ftp://192.168.., the server's local IP. Am I supposed to adjust something in the modem or router? Or is this a different problem altogether? BTW I'm using Windows Server 2008 r2 as my server's OS and using IIS for ftp.

  Read the article

• WIndows Hosted Network

  - by Nandakumar V

  I have created a hosted network in my windows7 system. The netsh wlan show hostednetwork command gives the output Hosted network settings ----------------------- Mode : Allowed SSID name : "rambo" Max number of clients : 100 Authentication : WPA2-Personal Cipher : CCMP Hosted network status --------------------- Status : Started BSSID : xx:xx:xx:xx:xx:xx Radio type : 802.11n Channel : 11 Number of clients : 1 xx:xx:xx:xx:xx:xx Authenticated But I have forgot the password for this connection and after some googling I found the command netsh wlan refresh hostednetwork YourNewNetworkPassword. But on executing this command it get the error C:\Users\user>netsh wlan refresh hostednetwork rambo123 Invalid value "rambo123" for command option "data". Usage: refresh hostednetwork [data=]key I have no idea what is wrong with this command.

  Read the article

• Correct usage of Windows Server on network?

  - by Hobart Bosworth

  I have two routers, one with dhcp turned on and the other with it off. this is a functioning home network. Now, I am trying to integrate into it a windows server. Should the windows server be doing the dhcp and dns work? And if so, what will this mean for the existing network? Will I need to reconfigure this? I am currently installing server 2003 onto my server machine. It is connected up to the network on the main router with dhcp. Any words of advice?

  Read the article

• Network Service Account not Inherited in ACL

  - by 5lovak

  I have a problem with files that are being moved into a folder that is set to replace permissions on child objects for the Network Service account. The process is that a media file is uploaded to a website, and is encoded by a piece of software. This moves the file to a folder but for some reason the files that get moved there don't inherit the Network Service account in security permissions. If I manually move a file into the folder the permission is inherited. I have used the effective permissions tool to check the Network Service account security permissions on the parent folder but this shows that there is nothing overriding it - the account has full permissions. Can try and supply more info if required, but any answers grealty appreciated!

  Read the article

• Is this one network or two networks?

  - by colemik

  I have this simple question and really don't know the answer. Does the drawing below show one network or two networks? This is a question about the definition of a network from the OSI / TCP/IP model point of view: From one point of view, those are two L2 networks connected with a bridge. From another point of view, this is one L3 network, that can have a common L3 address space (like 10.1.1.0). PS If this question is too dumb, please move it to Superuser.

  Read the article

• Vista Home Premium won't connect to network.

  - by Ice

  I deinstalled some software (e.g. some Toolbars for IE and Norton security suite, because the free trial period of 60 days is run out and so i want to switch to microsofts free security essentials). But now i cannot connect to the network again: Neither over LAN nor over WiFi. Neither with standard DHCP ON (sets a 169.254.x.y address) nor with fixed IP-Address. No error during changing the settings. Ping to the Gateway e.g. doesn't work and gives "generall failure". The DHCP-Client sets no IP-Address. There is allways only 'local access' on every network-connection. i ran out of ideas, please help. UPDATE per 2011-03-11: I followed each and every hint but nothing changed. I did a research on microsofts homepage through all the sites belonging to network but nothing helped. What can i do next?

  Read the article

• Connect a linux server to network and access it from another computer browser

  - by user1732451

  I had a server in a hosting company and I took it home. I need to connect him to a local network (not wifi) and access to the server from another computer in the network via browser, like I did it when it was in the hosting company. I don't have any knowledge in linux, I just know how to type in the command line :) I thinks all the IP configuration of the server is one big mess, because it passed from more then one hosting company to another... I tried a lot of tutorials that I found in the web, but nothing works - mainly because I don't know how to check if I did something wrong. I just need to know how to connect to local network ( D-Link router) and then access the server from another computer browser. thanks update: the server os is: CentOS release 4.8 (Final)

  Read the article

• Trouble Extending Network with Apple Airport Extreme (PC won't connect with Ethernet)

  - by 0x783czar

  So I have an Apple Airport Extreme base station that I use to create a wifi network at my house. But on a separate story from this station i have a PC (running Windows 7) that does not have a wireless card. Luckily, I have another Airport Extreme Base Station, so I figured I'd have my second station "extend" the existing network. I asked Apple if this was possible, which it was, and walked through the setup wizard to extend the network. Then I ran an ethernet cable from the Station to my PC. However the PC refuses to connect to the Internet. It says it can access the network, "Unidentified Network (Limited Connectivity)", but that's it. It tells me that my computer does not have an IP address. I tried running the cable to another computer (my Apple MacBook Pro) and got a similar error. Any thoughts?

  Read the article

• Windows Device Emulator V3, windows 7 + Network

  - by Petoj

  Well im debugging a windows CE application from visual studio in the Windows Device Emulator, now to setup the network i go to File - Configure - Network, i enable a network card and press OK, then i get this message: "The required Virtual Machine Network Driver could not be found. Make sure that Virtual PC 2007 is installed. You can install Virtual PC 2007 from http://go.microsoft.com/fwlink/?linkid=46859" Im running windows 7 and got a built-in Virtual pc and i would rather not have 2 installed at the same time is there any way to get this network driver without installing virtual PC 2007?

  Read the article

• WD MBWE II (White Strip Light) 2TB - unable to access data

  - by user210477

  I have a WD MBWE II (White Strip Light) 2TB - (WD20000H2NC-00) Was working fine until a few days ago. I guess there was a power failure and after that I am unable to access the 'Public' or the 'Download' folder anymore. I have been searching for answers everywhere but came up empty handed. Web GUI still works, SSH works. I hooked up both the drives on my PC and UFS Explorer sees the drive. But so far I am unable to retrieve any of my data. I do not remember what RAID setting I used when I first got the drive. I can see from GUI that it is set as "Stripe". The drive contains 10 years of family pictures which I really do not want to loose. Sadly and stupidly, I didn't even keep a backup of this drive. Can somebody please help or point me in the right direction. Thank you in advance for your help. Disk Utility on Ubuntu reports 1405 bad sectors on one drive. How can I retrieve my data? Please help. Logs below: ~ # mdadm --detail /dev/md[012345678] /dev/md0: Version : 0.90 Creation Time : Wed Jul 15 08:36:17 2009 Raid Level : raid1 Array Size : 1959872 (1914.26 MiB 2006.91 MB) Used Dev Size : 1959872 (1914.26 MiB 2006.91 MB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Fri Nov 1 13:53:29 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 04f7a661:98983b3b:26b29e4f:9b646adb Events : 0.266 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 8 17 1 active sync /dev/sdb1 /dev/md1: Version : 0.90 Creation Time : Wed Jul 15 08:36:18 2009 Raid Level : raid1 Array Size : 256896 (250.92 MiB 263.06 MB) Used Dev Size : 256896 (250.92 MiB 263.06 MB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Wed Oct 30 22:08:21 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : aaa7b859:c475312d:efc5a766:6526b867 Events : 0.10 Number Major Minor RaidDevice State 0 8 2 0 active sync /dev/sda2 1 8 18 1 active sync /dev/sdb2 /dev/md2: Version : 0.90 Creation Time : Sat Sep 25 10:01:26 2010 Raid Level : raid0 Array Size : 1947045760 (1856.85 GiB 1993.77 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Fri Nov 1 13:30:53 2013 State : active Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Chunk Size : 64K UUID : 01dae60a:6831077b:77f74530:8680c183 Events : 0.97 Number Major Minor RaidDevice State 0 8 4 0 active sync /dev/sda4 1 8 20 1 active sync /dev/sdb4 /dev/md3: Version : 0.90 Creation Time : Wed Jul 15 08:36:18 2009 Raid Level : raid1 Array Size : 987904 (964.91 MiB 1011.61 MB) Used Dev Size : 987904 (964.91 MiB 1011.61 MB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 3 Persistence : Superblock is persistent Update Time : Fri Nov 1 13:26:33 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 3f4099f2:72e6171b:5ba962fd:48464a62 Events : 0.54 Number Major Minor RaidDevice State 0 8 3 0 active sync /dev/sda3 1 8 19 1 active sync /dev/sdb3 mdadm: md device /dev/md4 does not appear to be active. mdadm: md device /dev/md5 does not appear to be active. mdadm: md device /dev/md6 does not appear to be active. mdadm: md device /dev/md7 does not appear to be active. mdadm: md device /dev/md8 does not appear to be active. ~ # cat /etc/mtab securityfs /sys/kernel/security securityfs rw 0 0 /dev/md2 /DataVolume xfs rw,usrquota 0 0 /dev/md4 /ExtendVolume xfs rw,usrquota 0 0 ~ # df -k Filesystem 1k-blocks Used Available Use% Mounted on /dev/md0 1929044 145092 1685960 8% / /dev/md3 972344 123452 799500 13% /var /dev/ram0 63412 20 63392 0% /mnt/ram ~ # mdadm -D /dev/md2 /dev/md2: Version : 0.90 Creation Time : Sat Sep 25 10:01:26 2010 Raid Level : raid0 Array Size : 1947045760 (1856.85 GiB 1993.77 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Fri Nov 1 13:30:53 2013 State : active Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Chunk Size : 64K UUID : 01dae60a:6831077b:77f74530:8680c183 Events : 0.97 Number Major Minor RaidDevice State 0 8 4 0 active sync /dev/sda4 1 8 20 1 active sync /dev/sdb4 ~ # mdadm -D /dev/md4 mdadm: md device /dev/md4 does not appear to be active. ~ # mount /dev/root on / type ext3 (rw,noatime,data=ordered) proc on /proc type proc (rw) sys on /sys type sysfs (rw) /dev/pts on /dev/pts type devpts (rw) securityfs on /sys/kernel/security type securityfs (rw) /dev/md3 on /var type ext3 (rw,noatime,data=ordered) /dev/ram0 on /mnt/ram type tmpfs (rw) ~ # cat /var/log/messages Oct 29 18:04:50 shmotashNAS daemon.warn wixEvent[3462]: Network Link - NIC 1 link is down. Oct 29 18:04:59 shmotashNAS daemon.info wixEvent[3462]: Network Link - NIC 1 link is up 100 Mbps full duplex. Oct 29 18:04:59 shmotashNAS daemon.info wixEvent[3462]: Network IP Address - NIC 1 use static IP address 192.168.1.102 Oct 29 18:17:45 shmotashNAS daemon.warn wixEvent[3462]: Network Link - NIC 1 link is down. Oct 29 18:17:53 shmotashNAS daemon.info wixEvent[3462]: Network Link - NIC 1 link is up 100 Mbps full duplex. Oct 29 18:17:53 shmotashNAS daemon.info wixEvent[3462]: Network IP Address - NIC 1 use static IP address 192.168.1.102 Oct 30 00:50:11 shmotashNAS daemon.warn wixEvent[3462]: Network Link - NIC 1 link is down. Oct 30 00:50:19 shmotashNAS daemon.info wixEvent[3462]: Network Link - NIC 1 link is up 100 Mbps full duplex. Oct 30 00:50:19 shmotashNAS daemon.info wixEvent[3462]: Network IP Address - NIC 1 use static IP address 192.168.1.102 Oct 30 16:29:47 shmotashNAS daemon.warn wixEvent[3462]: Network Link - NIC 1 link is down. Oct 30 16:30:00 shmotashNAS daemon.info wixEvent[3462]: Network Link - NIC 1 link is up 100 Mbps full duplex. Oct 30 16:30:00 shmotashNAS daemon.info wixEvent[3462]: Network IP Address - NIC 1 use static IP address 192.168.1.102 Oct 30 18:27:22 shmotashNAS daemon.warn wixEvent[3462]: Network Link - NIC 1 link is down. Oct 30 18:27:30 shmotashNAS daemon.info wixEvent[3462]: Network Link - NIC 1 link is up 100 Mbps full duplex. Oct 30 18:27:30 shmotashNAS daemon.info wixEvent[3462]: Network IP Address - NIC 1 use static IP address 192.168.1.102 Oct 30 19:06:03 shmotashNAS daemon.warn wixEvent[3462]: Network Link - NIC 1 link is down. Oct 30 19:06:10 shmotashNAS daemon.info wixEvent[3462]: Network Link - NIC 1 link is up 100 Mbps full duplex. Oct 30 19:06:10 shmotashNAS daemon.info wixEvent[3462]: Network IP Address - NIC 1 use static IP address 192.168.1.102 Oct 30 19:14:58 shmotashNAS daemon.warn wixEvent[3462]: Media Server - Media Server cannot find the path to one or more of the default folders: /Public/Shared Music, /Public/Shared Pictures or /Public/Shared Videos. Please verify that these folders have not been removed or that the names have not been changed. Oct 30 19:20:05 shmotashNAS daemon.alert wixEvent[3462]: Thermal Alarm - System temperature exceeded threshold.(66 degrees) Oct 30 19:58:29 shmotashNAS daemon.alert wixEvent[3462]: HDD SMART - HDD 1 SMART Health Status: Failed. Oct 30 22:05:39 shmotashNAS daemon.info init: Starting pid 13043, console /dev/null: '/usr/bin/killall' Oct 30 22:05:39 shmotashNAS syslog.info System log daemon exiting. Oct 30 22:08:09 shmotashNAS syslog.info syslogd started: BusyBox v1.1.1 Oct 30 22:08:09 shmotashNAS daemon.warn wixEvent[3557]: Network Link - NIC 1 link is down. Oct 30 22:08:19 shmotashNAS daemon.info wixEvent[3557]: Network Link - NIC 1 link is up 100 Mbps full duplex. Oct 30 22:08:25 shmotashNAS daemon.warn wixEvent[3557]: Network Link - NIC 1 link is down. Oct 30 22:08:37 shmotashNAS daemon.info wixEvent[3557]: Network Link - NIC 1 link is up 100 Mbps full duplex. Oct 30 22:08:44 shmotashNAS daemon.warn wixEvent[3557]: Network Link - NIC 1 link is down. Oct 30 22:08:46 shmotashNAS syslog.info miocrawler: +++++++++++++++ START OF ./miocrawler at 2013:10:30 - 22:08:46 [Version 01.09.00.96] ++++++++++++++ Oct 30 22:08:46 shmotashNAS syslog.info miocrawler: mc_db_init ... Oct 30 22:08:46 shmotashNAS syslog.info miocrawler: ****** database does not exist. ret = -1, creating path Oct 30 22:08:49 shmotashNAS syslog.info miocrawler: === mc_db_init ...Done. Oct 30 22:08:50 shmotashNAS syslog.info miocrawler: mcUtilsInit() Creating free queue pool Oct 30 22:08:51 shmotashNAS syslog.info miocrawler: === mcUtilsInit() Done. Oct 30 22:08:51 shmotashNAS syslog.info miocrawler: === inotify init done. Oct 30 22:08:51 shmotashNAS syslog.info miocrawler: mc_trans_updater_init() ... Oct 30 22:08:52 shmotashNAS syslog.info miocrawler: === mc_trans_updater_init() ...Done. Oct 30 22:08:52 shmotashNAS syslog.info miocrawler: === Walking directory done. Oct 30 22:08:57 shmotashNAS daemon.info wixEvent[3557]: Network Link - NIC 1 link is up 100 Mbps full duplex. Oct 30 22:08:57 shmotashNAS daemon.info wixEvent[3557]: Network IP Address - NIC 1 use static IP address 192.168.1.102 Oct 30 22:08:57 shmotashNAS daemon.info wixEvent[3557]: Network IP Address - NIC 1 use static IP address 192.168.1.102 Oct 30 22:08:57 shmotashNAS daemon.info wixEvent[3557]: Network IP Address - NIC 1 use static IP address 192.168.1.102 Oct 30 22:09:10 shmotashNAS daemon.info init: Starting pid 4605, console /dev/null: '/bin/touch' Oct 30 22:09:10 shmotashNAS daemon.info init: Starting pid 4607, console /dev/ttyS0: '/sbin/getty' Oct 30 22:09:10 shmotashNAS daemon.info wixEvent[3557]: System Startup - System startup. Oct 30 22:09:16 shmotashNAS daemon.warn wixEvent[3557]: Media Server - Media Server cannot find the path to one or more of the default folders: /Public/Shared Music, /Public/Shared Pictures or /Public/Shared Videos. Please verify that these folders have not been removed or that the names have not been changed. Oct 30 22:14:14 shmotashNAS daemon.warn wixEvent[3557]: Network Link - NIC 1 link is down. Oct 30 22:14:21 shmotashNAS daemon.info wixEvent[3557]: Network Link - NIC 1 link is up 100 Mbps full duplex. Oct 30 22:14:21 shmotashNAS daemon.info wixEvent[3557]: Network IP Address - NIC 1 use static IP address 192.168.1.102 Oct 30 22:29:36 shmotashNAS daemon.warn wixEvent[3557]: System Reboot - System will reboot. Oct 30 22:29:40 shmotashNAS daemon.info init: Starting pid 5974, console /dev/null: '/usr/bin/killall' Oct 30 22:29:40 shmotashNAS syslog.info System log daemon exiting. Oct 30 22:47:56 shmotashNAS syslog.info syslogd started: BusyBox v1.1.1 Oct 30 22:47:56 shmotashNAS daemon.warn wixEvent[3461]: Network Link - NIC 1 link is down. Oct 30 22:48:02 shmotashNAS daemon.info wixEvent[3461]: Network Link - NIC 1 link is up 100 Mbps full duplex. Oct 30 22:48:02 shmotashNAS daemon.info wixEvent[3461]: Network IP Address - NIC 1 use static IP address 192.168.1.102 Oct 30 22:48:09 shmotashNAS syslog.info miocrawler: +++++++++++++++ START OF ./miocrawler at 2013:10:30 - 22:48:09 [Version 01.09.00.96] ++++++++++++++ Oct 30 22:48:09 shmotashNAS syslog.info miocrawler: mc_db_init ... Oct 30 22:48:09 shmotashNAS syslog.info miocrawler: ++++++++ database exists: ret = 0 Oct 30 22:48:10 shmotashNAS syslog.info miocrawler: === mc_db_init ...Done. Oct 30 22:48:10 shmotashNAS syslog.info miocrawler: mcUtilsInit() Creating free queue pool Oct 30 22:48:11 shmotashNAS syslog.info miocrawler: === mcUtilsInit() Done. Oct 30 22:48:11 shmotashNAS syslog.info miocrawler: === inotify init done. Oct 30 22:48:11 shmotashNAS syslog.info miocrawler: mc_trans_updater_init() ... Oct 30 22:48:11 shmotashNAS syslog.info miocrawler: === mc_trans_updater_init() ...Done. Oct 30 22:48:11 shmotashNAS syslog.info miocrawler: === Walking directory done. Oct 30 22:48:27 shmotashNAS daemon.info init: Starting pid 4079, console /dev/null: '/bin/touch' Oct 30 22:48:27 shmotashNAS daemon.info init: Starting pid 4080, console /dev/ttyS0: '/sbin/getty' Oct 30 22:48:28 shmotashNAS daemon.info wixEvent[3461]: System Startup - System startup. Oct 30 22:49:01 shmotashNAS daemon.warn wixEvent[3461]: Media Server - Media Server cannot find the path to one or more of the default folders: /Public/Shared Music, /Public/Shared Pictures or /Public/Shared Videos. Please verify that these folders have not been removed or that the names have not been changed. Oct 30 23:51:11 shmotashNAS daemon.warn wixEvent[3461]: System Reboot - System will reboot. Oct 30 23:51:16 shmotashNAS daemon.info init: Starting pid 6498, console /dev/null: '/usr/bin/killall' Oct 30 23:51:16 shmotashNAS syslog.info System log daemon exiting. Oct 30 23:54:19 shmotashNAS syslog.info syslogd started: BusyBox v1.1.1 Oct 30 23:55:37 shmotashNAS daemon.info wixEvent[3476]: Network Link - NIC 1 link is up 100 Mbps full duplex. Oct 30 23:55:37 shmotashNAS daemon.info wixEvent[3476]: Network IP Address - NIC 1 use static IP address 192.168.1.102 Oct 30 23:55:44 shmotashNAS syslog.info miocrawler: +++++++++++++++ START OF ./miocrawler at 2013:10:30 - 23:55:44 [Version 01.09.00.96] ++++++++++++++ Oct 30 23:55:44 shmotashNAS syslog.info miocrawler: mc_db_init ... Oct 30 23:55:44 shmotashNAS syslog.info miocrawler: ++++++++ database exists: ret = 0 Oct 30 23:55:45 shmotashNAS syslog.info miocrawler: === mc_db_init ...Done. Oct 30 23:55:45 shmotashNAS syslog.info miocrawler: mcUtilsInit() Creating free queue pool Oct 30 23:55:46 shmotashNAS syslog.info miocrawler: === mcUtilsInit() Done. Oct 30 23:55:46 shmotashNAS syslog.info miocrawler: === inotify init done. Oct 30 23:55:46 shmotashNAS syslog.info miocrawler: mc_trans_updater_init() ... Oct 30 23:55:46 shmotashNAS syslog.info miocrawler: === mc_trans_updater_init() ...Done. Oct 30 23:55:46 shmotashNAS syslog.info miocrawler: === Walking directory done. Oct 30 23:55:58 shmotashNAS daemon.info init: Starting pid 4115, console /dev/null: '/bin/touch' Oct 30 23:55:58 shmotashNAS daemon.info init: Starting pid 4116, console /dev/ttyS0: '/sbin/getty' Oct 30 23:55:58 shmotashNAS daemon.info wixEvent[3476]: System Startup - System startup. Oct 30 23:56:33 shmotashNAS daemon.warn wixEvent[3476]: Media Server - Media Server cannot find the path to one or more of the default folders: /Public/Shared Music, /Public/Shared Pictures or /Public/Shared Videos. Please verify that these folders have not been removed or that the names have not been changed. Oct 31 00:29:14 shmotashNAS auth.info sshd[5409]: Server listening on 0.0.0.0 port 22. Oct 31 00:31:25 shmotashNAS auth.info sshd[5486]: Accepted password for root from 192.168.1.100 port 50785 ssh2 Oct 31 00:33:44 shmotashNAS auth.info sshd[5565]: Accepted password for root from 192.168.1.100 port 50817 ssh2 Oct 31 00:36:39 shmotashNAS daemon.info init: Starting pid 5680, console /dev/null: '/usr/bin/killall' Oct 31 00:36:39 shmotashNAS syslog.info System log daemon exiting. Oct 31 00:40:44 shmotashNAS syslog.info syslogd started: BusyBox v1.1.1 Oct 31 00:40:51 shmotashNAS daemon.info wixEvent[3464]: Network Link - NIC 1 link is up 100 Mbps full duplex. Oct 31 00:40:51 shmotashNAS daemon.info wixEvent[3464]: Network IP Address - NIC 1 use static IP address 192.168.1.102 Oct 31 00:41:00 shmotashNAS syslog.info miocrawler: +++++++++++++++ START OF ./miocrawler at 2013:10:31 - 00:41:00 [Version 01.09.00.96] ++++++++++++++ Oct 31 00:41:00 shmotashNAS syslog.info miocrawler: mc_db_init ... Oct 31 00:41:00 shmotashNAS syslog.info miocrawler: ++++++++ database exists: ret = 0 Oct 31 00:41:00 shmotashNAS syslog.info miocrawler: === mc_db_init ...Done. Oct 31 00:41:01 shmotashNAS syslog.info miocrawler: mcUtilsInit() Creating free queue pool Oct 31 00:41:02 shmotashNAS syslog.info miocrawler: === mcUtilsInit() Done. Oct 31 00:41:02 shmotashNAS syslog.info miocrawler: === inotify init done. Oct 31 00:41:02 shmotashNAS syslog.info miocrawler: mc_trans_updater_init() ... Oct 31 00:41:02 shmotashNAS syslog.info miocrawler: === mc_trans_updater_init() ...Done. Oct 31 00:41:02 shmotashNAS syslog.info miocrawler: === Walking directory done. Oct 31 00:41:14 shmotashNAS daemon.info init: Starting pid 4101, console /dev/null: '/bin/touch' Oct 31 00:41:14 shmotashNAS daemon.info init: Starting pid 4102, console /dev/ttyS0: '/sbin/getty' Oct 31 00:41:15 shmotashNAS daemon.info wixEvent[3464]: System Startup - System startup. Oct 31 00:41:47 shmotashNAS daemon.warn wixEvent[3464]: Media Server - Media Server cannot find the path to one or more of the default folders: /Public/Shared Music, /Public/Shared Pictures or /Public/Shared Videos. Please verify that these folders have not been removed or that the names have not been changed. Oct 31 01:13:19 shmotashNAS daemon.info init: Starting pid 5385, console /dev/null: '/usr/bin/killall' Oct 31 01:13:19 shmotashNAS syslog.info System log daemon exiting. Nov 1 13:26:25 shmotashNAS syslog.info syslogd started: BusyBox v1.1.1 Nov 1 13:26:32 shmotashNAS daemon.info wixEvent[3471]: Network Link - NIC 1 link is up 100 Mbps full duplex. Nov 1 13:26:32 shmotashNAS daemon.info wixEvent[3471]: Network IP Address - NIC 1 use static IP address 192.168.1.102 Nov 1 13:26:38 shmotashNAS syslog.info miocrawler: +++++++++++++++ START OF ./miocrawler at 2013:11:01 - 13:26:38 [Version 01.09.00.96] ++++++++++++++ Nov 1 13:26:38 shmotashNAS syslog.info miocrawler: mc_db_init ... Nov 1 13:26:38 shmotashNAS syslog.info miocrawler: ++++++++ database exists: ret = 0 Nov 1 13:26:39 shmotashNAS syslog.info miocrawler: === mc_db_init ...Done. Nov 1 13:26:39 shmotashNAS syslog.info miocrawler: mcUtilsInit() Creating free queue pool Nov 1 13:26:40 shmotashNAS syslog.info miocrawler: === mcUtilsInit() Done. Nov 1 13:26:40 shmotashNAS syslog.info miocrawler: === inotify init done. Nov 1 13:26:40 shmotashNAS syslog.info miocrawler: mc_trans_updater_init() ... Nov 1 13:26:40 shmotashNAS syslog.info miocrawler: === mc_trans_updater_init() ...Done. Nov 1 13:26:40 shmotashNAS syslog.info miocrawler: === Walking directory done. Nov 1 13:26:52 shmotashNAS daemon.info init: Starting pid 4078, console /dev/null: '/bin/touch' Nov 1 13:26:52 shmotashNAS daemon.info init: Starting pid 4079, console /dev/ttyS0: '/sbin/getty' Nov 1 13:26:52 shmotashNAS daemon.info wixEvent[3471]: System Startup - System startup. Nov 1 13:27:28 shmotashNAS daemon.warn wixEvent[3471]: Media Server - Media Server cannot find the path to one or more of the default folders: /Public/Shared Music, /Public/Shared Pictures or /Public/Shared Videos. Please verify that these folders have not been removed or that the names have not been changed. Nov 1 13:44:48 shmotashNAS auth.info sshd[5375]: Accepted password for root from 192.168.1.103 port 50217 ssh2 Nov 1 13:51:08 shmotashNAS auth.info sshd[5894]: Accepted password for root from 192.168.1.103 port 50380 ssh2

  Read the article

• Delaying NIS & NFS startup till after network interface is fully ready on Fedora 17

  - by obmarg

  I've recently set up a fedora 17 server for our network, and I've been having trouble getting the NIS service to work on startup. Here's some logs from the system: Aug 21 12:57:12 cairnwell ypbind-pre-setdomain[718]: Setting NIS domain: 'indigo-nis' (environment variable) Aug 21 12:57:13 cairnwell ypbind: Binding NIS service Aug 21 12:57:13 cairnwell rpc.statd[730]: Unable to prune capability 0 from bounding set: Operation not permitted Aug 21 12:57:13 cairnwell systemd[1]: nfs-lock.service: control process exited, code=exited status=1 Aug 21 12:57:13 cairnwell systemd[1]: Unit nfs-lock.service entered failed state. Aug 21 12:57:14 cairnwell setroubleshoot: SELinux is preventing /usr/sbin/rpc.statd from using the setpcap capability. For complete SELinux messages. run sealert -l 024bba8a-b0ef-43dc-b195-5c9a2d4c4d41 Aug 21 12:57:15 cairnwell kernel: [ 18.822282] bnx2 0000:02:00.0: em1: NIC Copper Link is Up, 1000 Mbps full duplex Aug 21 12:57:15 cairnwell kernel: [ 18.822925] ADDRCONF(NETDEV_CHANGE): em1: link becomes ready Aug 21 12:57:15 cairnwell NetworkManager[621]: <info> (em1): carrier now ON (device state 20) Aug 21 12:57:15 cairnwell NetworkManager[621]: <info> (em1): device state change: unavailable -> disconnected (reason 'carrier-changed') [20 30 40] Aug 21 12:57:15 cairnwell NetworkManager[621]: <info> Auto-activating connection 'System em1'. Aug 21 12:57:15 cairnwell NetworkManager[621]: <info> Activation (em1) starting connection 'System em1' Aug 21 12:57:15 cairnwell NetworkManager[621]: <info> (em1): device state change: disconnected -> prepare (reason 'none') [30 40 0] ....... Aug 21 12:57:19 cairnwell sendmail[790]: YPBINDPROC_DOMAIN: Domain not bound Aug 21 12:57:26 cairnwell sendmail[790]: YPBINDPROC_DOMAIN: Domain not bound Aug 21 12:57:31 cairnwell sendmail[790]: YPBINDPROC_DOMAIN: Domain not bound Aug 21 12:57:35 cairnwell sendmail[790]: YPBINDPROC_DOMAIN: Domain not bound Aug 21 12:58:00 cairnwell ypbind: Binding took 47 seconds Aug 21 12:58:00 cairnwell ypbind: NIS server for domain indigo-nis is not responding. Aug 21 12:58:01 cairnwell ypbind: Killing ypbind with PID 733. Aug 21 12:58:01 cairnwell ypbind-post-waitbind[734]: /usr/lib/ypbind/ypbind-post-waitbind: line 51: kill: SIGTERM: invalid signal specification Aug 21 12:58:01 cairnwell systemd[1]: ypbind.service: control process exited, code=exited status=1 Aug 21 12:58:01 cairnwell systemd[1]: Unit ypbind.service entered failed state. By the looks of these logs the ypbind service is starting up at 12:57:12 but the network interface isn't coming up till 12:57:15. My guess is that this is causing ypbind to time out when trying to connect. As a knock-on effect the NIS failure is causing problems with NFS which is no longer able to map UIDs properly. This problem doesn't seem to be fixed by actually starting ypbind etc. so I've had to set all my NFS shares to noauto. I have tried manually adding NETWORKDELAY and NETWORKWAIT in /etc/sysconfig/network and also running systemctl enable NetworkManager-wait-online.service as I've seen suggested in some places, but neither of these have had any effect. It is relatively easy to fix manually by restarting ypbind & mounting NFS shares after the network has started up, but it's less than ideal to have to do this every time the server has been rebooted. Does anyone know of an easy (and preferably hack-free) way of delaying the ypbind startup till after the network interface is fully ready?

  Read the article

• Connect to VPN from Mac on Time Capsule network

  - by Lou Franco

  I have a few clients on my network that can connect to my work VPN (Windows PPTP) when they are not on my home network. On my home network (Cable Modem with Time Capsule providing Wifi), it fails very early -- looks like it can't even establish a connection. Logs just say that it failed -- even verbose logs don't have much: I redacted the host and IP from this log, but I can ping it. Wed Feb 2 14:32:41 2011 : PPTP connecting to server 'XXX.XXX.com' (XXX.XX.XX.XX)... Wed Feb 2 14:32:41 2011 : PPTP connection established. Wed Feb 2 14:32:41 2011 : using link 0 Wed Feb 2 14:32:41 2011 : Using interface ppp0 Wed Feb 2 14:32:41 2011 : Connect: ppp0 <--> socket[34:17] Wed Feb 2 14:32:41 2011 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x543c7af8> <pcomp> <accomp>] Wed Feb 2 14:32:44 2011 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x543c7af8> <pcomp> <accomp>] Wed Feb 2 14:32:47 2011 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x543c7af8> <pcomp> <accomp>] Wed Feb 2 14:32:50 2011 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x543c7af8> <pcomp> <accomp>] Wed Feb 2 14:32:53 2011 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x543c7af8> <pcomp> <accomp>] Wed Feb 2 14:32:56 2011 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x543c7af8> <pcomp> <accomp>] Wed Feb 2 14:32:59 2011 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x543c7af8> <pcomp> <accomp>] Wed Feb 2 14:33:02 2011 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x543c7af8> <pcomp> <accomp>] Wed Feb 2 14:33:05 2011 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x543c7af8> <pcomp> <accomp>] Wed Feb 2 14:33:08 2011 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x543c7af8> <pcomp> <accomp>] Wed Feb 2 14:33:11 2011 : LCP: timeout sending Config-Requests Wed Feb 2 14:33:11 2011 : Connection terminated. Wed Feb 2 14:33:11 2011 : PPTP disconnecting... Wed Feb 2 14:33:11 2011 : PPTP disconnected Others can get to the VPN and I can too, but not on my network. The only clue I have seen in other forums is to set the NAT default host on the Time Capsule -- I set this to the IP that my mac got over DHCP. I made sure that my Mac gets a different range of IP addresses that it would get if it connected to the VPN (192.168.1.x vs. 10.0.0.x). Not using any VPN client -- just Network System Preferences. It has worked in the past -- but it was a while ago, so I can't pinpoint a change. My sysadmin doesn't even see incoming connections to the VPN (nothing logged about me when I connect). Looking for any diagnostic advice at all

  Read the article

< Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >