Search Results

Search found 7294 results on 292 pages for 'parameters'.

Page 103/292 | < Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >

• SQL SERVER – Discard Results After Query Execution – SSMS

  - by pinaldave

  The first thing I do any day is to turn on the computer. Today I woke up and as soon as I turned on the computer I saw a chat message from a friend. He was a bit confused and wanted me to help him. Just as usual I am keeping the relevant conversation in focus and documenting our conversation as chat. Let us call him Ajit. Ajit: Pinal, every time I run a query there is no result displayed in the SSMS but when I run the query in my application it works and returns an appropriate result. Pinal:  Have you tried with different parameters? Ajit: Same thing. However, it works from another computer when I connect to the same server with the same query parameters? Pinal: What? That is new and I believe it is something to do with SSMS and not with the server. Send me screenshot please. Ajit: I believe so, let me send you a screenshot, Pinal: (looking at the screenshot) Oh man, there is no result-tab at all. Ajit: That is what the problem is. It does not have the tab which displays the result. This works just fine from another computer. Pinal: Have you referred Nakul’s blog post – SSMS – Query result options – Discard result after query executes, that talks about setting which can discard the query results after execution. (After a while) Ajit: I think it seems like on the computer where I am running the query my SSMS seems to have the option enabled related to discarding results. I fixed it by following Nakul’s blog post. Pinal: Great! Quite often I get the question what is the importance of the feature. Let us first see how to turn on or turn off this feature in SQL Server Management Studio 2012. In SSMS 2012 go to Tools >> Options >> Query Results > SQL Server >> Results to Grid >> Discard Results After Query Execution. When enabled this option will discard results after the execution. The advantage of disabling the option is that it will improve the performance by using less memory. However the real question is why would someone enable or disable the option. What are the cases when someone wants to run the query but do not care about the result? Matter of the fact, it does not make sense at all to run query and not care about the result. The matter of the fact, I can see quite a few reasons for using this option. I often enable this option when I am doing performance tuning exercise. During performance tuning exercise when I am working with execution plans and do not need results to verify every time or when I am tuning Indexes and its effect on execution plan I do not need the results. In this kind of situations I do keep this option on and discard the results. It always helps me big time as in most of the performance tuning exercise I am dealing with huge amount of the data and dealing with this data can be expensive. Nakul’s has done the experiment here already but I am going to repeat the same again using AdventureWorks Database. Run following T-SQL Script with and without enabling the option to discard the results. USE AdventureWorks2012 GO SELECT * FROM Sales.SalesOrderDetail GO 10 After enabling Discard Results After Query Execution After disabling Discard Results After Query Execution Well, this is indeed a good option when someone is debugging the execution plan or does not want the result to be displayed. Please note that this option does not reduce IO or CPU usage for SQL Server. It just discards the results after execution and a good help for debugging on the development server. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Technology

  Read the article

• PHP Web Services - Nice try

  Thanks to the membership in the O'Reilly User Group Programme the Mauritius Software Craftsmanship Community (short: MSCC) recently received a welcome package with several book titles. Among them is the latest publication of Lorna Jane Mitchell - 'PHP Web Services: APIs for the Modern Web'. Following is the book review I put on Amazon: Nice try! Initially, I was astonished that a small book like 'PHP Web Services' would be able to cover all the interesting topics about APIs and Web Services, independently whether they are written in PHP or not. And unfortunately, the title isn't able to stand up to the readers (or at least my) expectations. Maybe as a light defense, there is no usual paragraph about the intended audience of that book, but still I have to admit that the first half (chapters 1 to 8) are well written and Lorna has her points on the various technologies. Also, the code samples in PHP are clean and easy to understand. With chapter 'Debugging Web Services' the book started to change my mind about the clarity of advice and the instructions on designing and developing good APIs. Eventually, this might be related to the fact that I'm used to other tools since years, like Telerik Fiddler as HTTP proxy in order to trace and inspect any kind of request/response handling. Including localhost monitoring, SSL certification acceptance, and the ability to debug mobile devices, especially iOS-based ones. Compared to Charles, Fiddler is available for free. What really got me off the hook is the following statement in chapter 10 about Service Type Decisions: "For users who have larger systems using technology stacks such as Java, C++, or .NET, it may be easier for them to integrate with a SOAP service." WHAT? A couple of pages earlier the author recommends to stay away from 'old-fashioned' API styles like SOAP (if possible). And on top of that I wonder why there are tons of documentation towards development of RESTful Web Services based on WebAPI. The ASP.NET stack clearly moves away from SOAP to JSON and REST since years! Honestly, as a software developer on the .NET stack this leaves a mixed feeling after all. As for the remaining chapters I simply consider them as 'blah blah' without any real value and lots of theoretical advice. Related to the chapter 13 about 'Documentation', I just had the 'pleasure' to write a C#-based client against a Java-based SOAP Web Service. Personally, I take the WSDL as the master reference in the first place and Visual Studio generates all the stub types involved in the communication. During the implementation and testing I came across a 'java.lang.NullPointerException' in various methods and for various method parameters. The WSDL and the generated types were declared as Nullable, so nothing to worry about, or? Well, I logged in a support ticket, and guess what was the response to that scenario? "The service definition in the WSDL is wrong, please refer to the documentation in order to use the methods and parameters correctly" - No comment! Lorna's title is a quick read and in some areas she has good advice on designing and implementing Web Services and APIs. But roughly 100 pages aren't enough to cover a vast topic like that. After all, nice try and I'm looking forward to an improved second edition. Honestly, I never thought that I would come across a poor review. In general, it's a good book but it clearly has a lack of depth, the PHP code samples are incomplete (closing tags missing), and there are too many assumptions and theoretical statements.

  Read the article

• Algorithm to Find the Aggregate Mass of "Granola Bar"-Like Structures?

  - by Stuart Robbins

  I'm a planetary science researcher and one project I'm working on is N-body simulations of Saturn's rings. The goal of this particular study is to watch as particles clump together under their own self-gravity and measure the aggregate mass of the clumps versus the mean velocity of all particles in the cell. We're trying to figure out if this can explain some observations made by the Cassini spacecraft during the Saturnian summer solstice when large structures were seen casting shadows on the nearly edge-on rings. Below is a screenshot of what any given timestep looks like. (Each particle is 2 m in diameter and the simulation cell itself is around 700 m across.) The code I'm using already spits out the mean velocity at every timestep. What I need to do is figure out a way to determine the mass of particles in the clumps and NOT the stray particles between them. I know every particle's position, mass, size, etc., but I don't know easily that, say, particles 30,000-40,000 along with 102,000-105,000 make up one strand that to the human eye is obvious. So, the algorithm I need to write would need to be a code with as few user-entered parameters as possible (for replicability and objectivity) that would go through all the particle positions, figure out what particles belong to clumps, and then calculate the mass. It would be great if it could do it for "each" clump/strand as opposed to everything over the cell, but I don't think I actually need it to separate them out. The only thing I was thinking of was doing some sort of N2 distance calculation where I'd calculate the distance between every particle and if, say, the closest 100 particles were within a certain distance, then that particle would be considered part of a cluster. But that seems pretty sloppy and I was hoping that you CS folks and programmers might know of a more elegant solution? Edited with My Solution: What I did was to take a sort of nearest-neighbor / cluster approach and do the quick-n-dirty N2 implementation first. So, take every particle, calculate distance to all other particles, and the threshold for in a cluster or not was whether there were N particles within d distance (two parameters that have to be set a priori, unfortunately, but as was said by some responses/comments, I wasn't going to get away with not having some of those). I then sped it up by not sorting distances but simply doing an order N search and increment a counter for the particles within d, and that sped stuff up by a factor of 6. Then I added a "stupid programmer's tree" (because I know next to nothing about tree codes). I divide up the simulation cell into a set number of grids (best results when grid size ˜7 d) where the main grid lines up with the cell, one grid is offset by half in x and y, and the other two are offset by 1/4 in ±x and ±y. The code then divides particles into the grids, then each particle N only has to have distances calculated to the other particles in that cell. Theoretically, if this were a real tree, I should get order N*log(N) as opposed to N2 speeds. I got somewhere between the two, where for a 50,000-particle sub-set I got a 17x increase in speed, and for a 150,000-particle cell, I got a 38x increase in speed. 12 seconds for the first, 53 seconds for the second, 460 seconds for a 500,000-particle cell. Those are comparable speeds to how long the code takes to run the simulation 1 timestep forward, so that's reasonable at this point. Oh -- and it's fully threaded, so it'll take as many processors as I can throw at it.

  Read the article

• E-Business Suite Plug-in 12.1.0.1 for Enterprise Manager 12c Now Available

  - by Steven Chan (Oracle Development)

  Oracle E-Business Suite Plug-in 12.1.0.1.0 is now available for use with Oracle Enterprise Manager 12c.  Oracle E-Business Suite Plug-in 12.1.0.1 is an integral part of Oracle Enterprise Manager 12 Application Management Suite for Oracle E-Business Suite. This latest plug-in extends EM 12c Cloud Control with E-Business Suite specific system management capabilities and features enhanced change management support. The Oracle Enterprise Manager 12c Application Management Suite for Oracle E-Business Suite includes: Oracle E-Business Suite Plug-in 12.1.0.1 combines functionality that was available in the previously-standalone Application Management Pack for Oracle E-Business Suite and Application Change Management Pack for Oracle E-Business Suite with Oracle Real User Experience Insight Oracle Configuration & Compliance capabilities  Features that were previously available in the standalone management packs are now packaged in the Oracle E-Business Suite Plug-in, which is certified with Oracle Enterprise Manager 12c Cloud Control:  Functionality previously available for Application Management Pack (AMP) is now classified as “System Management for Oracle E-Business Suite” within the plug-in. Functionality previously available for Application Change Management Pack (ACMP) is now classified as “Change Management for Oracle E-Business Suite” within the plug-in. The Application Configuration Console and the Configuration Change Console are now native components of Oracle Enterprise Manager 12c. System Management Enhancements General Oracle Enterprise Manager 12c Base Platform uptake: All components of the management suite are certified with Oracle Enterprise Manager 12c Cloud Control. Security Privilege Delegation: The Oracle E-Business Suite Plug-in now extends Enterprise Manager’s privilege delegation through Sudo and PowerBroker to Oracle E-Business Suite Plug-in host targets. Privileges and Roles for Managing Oracle E-Business Suite: This release includes new ready-to-use target and resource privileges to monitor, manage, and perform Change Management functionality. Cloning Named Credentials Uptake in Cloning: The Clone module transactions now let users leverage the Named Credential feature introduced in Enterprise Manager 12c, thereby passing all the benefits of Named Credentials features in Enterprise Manager to the Oracle E-Business Suite Plug-in users. Smart Clone improvements: In addition to the existing 11i support that was available on previous releases, the new Oracle E-Business Suite Plug-in widens the coverage supporting Oracle E-Business Suite releases 12.0.x and 12.1.x. The new and improved Smart Clone UI supports the adding of "pre and post" custom steps to a copy of the ready-to-use cloning deployment procedure. Now a user can pass parameters to the custom steps through the interview screen of the UI as well as pass ready-to-use parameters to the custom steps. Additional configuration enhancements are included for configuring RAC targets databases, such as the ability to customize listener names and the option to configure with Virtual IP or Scan IP. Change Management Enhancements Customization Manager Support for longer file names: Customization Manager now handles file names up to thirty characters in length. Patch Manager Queuing of Patch Manager Runs: This feature allows patch runs to queue up if Patch Manager detects a specific target is in a blackout state. Multi-node system patching: The patch run interview has been enhanced to allow Enterprise Manager Administrator to choose which nodes adpatch will run on. New AD Administration Options: The patch run interview has been extended to include AD Administration Options "Relink Application Programs", "Generate Product Jars Files", "Generate Report Files", and "Generate Form Files". Downloads Fresh install For new customers or existing customers wishing to perform a fresh install Enterprise Manager Store (within Enterprise Manager 12c) Oracle Software Delivery Cloud Upgrades For existing customers wishing to upgrade their AMP 4.0 or AMP 3.1 installations Oracle Technology Network Getting Started with Oracle E-Business Suite Plug-In, Release 12.1.0.1 (Note 1434392.1) Prerequisites Enterprise Manager Cloud Control 12cOne or more of the following Oracle E-Business Suite Releases Release 11.5.10 CU2 with 11i.ATG_PF.H.RUP6 or higher Release 12.0.4 with R12.ATG_PF.A.delta.6 Release 12.1 with R12.ATG_PF.B.delta.3 Platforms and OS Release certification information is available from My Oracle Support via the Certification page. Search for "Oracle Application Management Pack for Oracle E-Business Suite and release 12.1.0.1.0." Related Articles Oracle E-Business Suite Plug-in 4.0 Released for OEM 11g (11.1.0.1)

  Read the article

• SAB BizTalk Archiving Pipeline Component - Codeplex

  - by Stuart Brierley

  In an effort to give a little more to the BizTalk development community, I have created my first Codeplex project. The SAB BizTalk Archiving Pipeline Component was written using Visual Studio 2010 with BizTalk Server 2010 intended as the target platform.  It is currently at version 0.1, meaning that I have not yet completed all the intended functionality and have so far carried out a limited number of tests.  It does however archive files within the bounds of the functionailty so far implemented and seems to be stable in use. It is based on a recent evolution of a basic archiving component that I wrote in the past, and it is my hope that it will continue to evolve in the coming months. This work was inspired by some old posts by Gilles Zunino and Jeff Lynch.   You can download the documentation, source code or component dll from Codeplex, but to give you a taste here is the first section of the documentation to whet your appetite: SAB BizTalk Archiving Pipeline Component   The SAB BizTalk Archiving Pipeline Component has been developed to allow custom piplelines to be created that can archive messages at any stage of pipeline processing.   It works in both receive and send pipelines and will archive messages to file based on the configuration applied to the component in the BizTalk Administration Console.   The Archiving Pipeline Component has been coded for use with BizTalk Server 2010. Use with other versions of BizTalk has not been tested.   The Archiving Pipeline component is supplied as a dll file that should be placed in the BizTalk Server Pipeline Components folder. It can then be used when developing custom pipelines to be deployed as a part of your BizTalk Server applications.   This version of the component allows you to use a number of generic messaging macros and also a small number that are specific to the FILE adapter. It is intended to extend these macros to cover context properties from other adapters in future releases.     Archive Pipeline Parameters As with all pipeline components, the following parameters can be set when creating your custom pipeline and at runtime via the administration console.   Enabled:              Enables and disables the archive process.                                 True; messages will be archived.   False; messages will be passed to the next stage in the pipeline without performing any processing.   File Name:          The file name of the archived message.   Allows the component to build the archive filename at run-time; based on the values entered, the permitted macros and data extracted from the message context properties.   e.g.        %FileReceivedFileName%-%InterchangeSequenceNumber%   File Mask:           The extension to be added to the File Name following all Macro processing.   e.g.        .xml   File Path:             The path on which the archived message should be saved.   Allows the component to build the archive directory at run-time; based on the values entered, permitted macros and data extracted from the message context properties.   e.g.        C:\Archive\%ReceivePortName%\%Year%\%Month%\%Day%\                   \\ArchiveShare\%ReceivePortName%\%Date%\     Overwrite:          Enables and disables existing file overwrites.   True; any existing file with the same File Path/Name combination (following macro replacement) will be overwritten.   False; any existing file with the same File Path/Name combination (following macro replacement) will not be overwritten.  The current message will be archived with a GUID appended to the File Name.

  Read the article

• .Net Reflector 6.5 EAP now available

  - by CliveT

  With the release of CLR 4 being so close, we’ve been working hard on getting the new C# and VB language features implemented inside Reflector. The work isn’t complete yet, but we have some of the features working. Most importantly, there are going to be changes to the Reflector object model, and we though it would be useful for people to see the changes and have an opportunity to comment on them. Before going any further, we should tell you what the EAP contains that’s different from the released version. A number of bugs have been fixed, mainly bugs that were raised via the forum. This is slightly offset by the fact that this EAP hasn’t had a whole lot of testing and there may have been new bugs introduced during the development work we’ve been doing. The C# language writer has been changed to display in and out co- and contra-variance markers on interfaces and delegates, and to display default values for optional parameters in method definitions. We also concisely display values passed by reference into COM calls. However, we do not change callsites to display calls using named parameters; this looks like hard work to get right. The forthcoming version of the C# language introduces dynamic types and dynamic calls. The new version of Reflector should display a dynamic call rather than the generated C#: dynamic target = MyTestObject(); target.Hello("Mum"); We have a few bugs in this area where we are not casting to dynamic when necessary. These have been fixed on a branch and should make their way into the next EAP. To support the dynamic features, we’ve added the types IDynamicMethodReferenceExpression, IDynamicPropertyIndexerExpression, and IDynamicPropertyReferenceExpression to the object model. These types, based on the versions without “Dynamic” in the name, reflect the fact that we don’t have full information about the method that is going to be called, but only have its name (as a string). These interfaces are going to change – in an internal version, they have been extended to include information about which parameter positions use runtime types and which use compile time types. There’s also the interface, IDynamicVariableDeclaration, that can be used to determine if a particular variable is used at dynamic call sites as a target. A couple of these language changes have also been added to the Visual Basic language writer. The new features are exposed only when the optimization level is set to .NET 4. When the level is set this high, the other standard language writers will simply display a message to say that they do not handle such an optimization level. Reflector Pro now has 4.0 as an optional compilation target and we have done some work to get the pdb generation right for these new features. The EAP version of Reflector no longer installs the add-in on startup. The first time you run the EAP, it displays the integration options dialog. You can use the checkboxes to select the versions of Visual Studio into which you want to install the EAP version. Note that you can only have one version of Reflector Pro installed in Visual Studio; if you install into a Visual Studio that has another version installed, the previous version will be removed. Please try it out and send your feedback to the EAP forum.

  Read the article

• [Silverlight] How to watermark a WriteableBitmap with a text

  - by Benjamin Roux

  Hello, In my current project, I needed to watermark a WriteableBitmap with a text. As I couldn’t find anything I decided to create a small extension method to do so. public static class WriteableBitmapEx { /// <summary> /// Creates a watermark on the specified image /// </summary> /// <param name="input">The image to create the watermark from</param> /// <param name="watermark">The text to watermark</param> /// <param name="color">The color - default is White</param> /// <param name="fontSize">The font size - default is 50</param> /// <param name="opacity">The opacity - default is 0.25</param> /// <param name="hasDropShadow">Specifies if a drop shadow effect must be added - default is true</param> /// <returns>The watermarked image</returns> public static WriteableBitmap Watermark(this WriteableBitmap input, string watermark, Color color = default(Color), double fontSize = 50, double opacity = 0.25, bool hasDropShadow = true) { var watermarked = GetTextBitmap(watermark, fontSize, color == default(Color) ? Colors.White : color, opacity, hasDropShadow); var width = watermarked.PixelWidth; var height = watermarked.PixelHeight; var result = input.Clone(); var position = new Rect(input.PixelWidth - width - 20 /* right margin */, input.PixelHeight - height, width, height); result.Blit(position, watermarked, new Rect(0, 0, width, height)); return result; } /// <summary> /// Creates a WriteableBitmap from a text /// </summary> /// <param name="text"></param> /// <param name="fontSize"></param> /// <param name="color"></param> /// <param name="opacity"></param> /// <param name="hasDropShadow"></param> /// <returns></returns> private static WriteableBitmap GetTextBitmap(string text, double fontSize, Color color, double opacity, bool hasDropShadow) { TextBlock txt = new TextBlock(); txt.Text = text; txt.FontSize = fontSize; txt.Foreground = new SolidColorBrush(color); txt.Opacity = opacity; if (hasDropShadow) txt.Effect = new DropShadowEffect(); WriteableBitmap bitmap = new WriteableBitmap((int)txt.ActualWidth, (int)txt.ActualHeight); bitmap.Render(txt, null); bitmap.Invalidate(); return bitmap; } } For this code to run, you need the WritableBitmapEx library. As you can see, it’s quite simple. You just need to call the Watermark method and pass it the text you want to add in your image. You can also pass optional parameters like the color, the opacity, the fontsize or if you want a drop shadow effect. I could have specify other parameters like the position or the the font family but you can change the code if you need to. Here’s what it can give Hope this helps.

  Read the article

• Using the latest (stable release) of Oracle Developer Tools for Visual Studio 11.1.0.7.20.

  - by mbcrump

  +  = Simple and safe Data connections.   This guide is for someone wanting to use the latest ODP.NET quickly without reading the official documentation. This guide will get you up and running in about 15 minutes. I have reviewed my referral link to my simple Setting up ODP.net with Win7 x64 and noticed most people were searching for one of the following terms: “how to use odp.net with vs” “setup connection odp.net” “query db using odp and vs” While my article provided links and a sample tnsnames.ora file, it really didn’t tell you how to use it. I’m hoping that this brief tutorial will help. So before we get started, you will need the following: Download the following: www.oracle.com/technology/software/tech/dotnet/utilsoft.html from oracle and install it. It is the first one on the page. Visual Studio 2008 or 2010. It should be noted that The System.Data.OracleClient namespace is the OLD .NET Framework Data Provider for Oracle. It should not be used anymore as it has been depreciated. The latest version which is what we are using is Oracle.DataAccess.Client. First things first, Add a reference to the Oracle.DataAccess.Client after you install ODP.NET   Copy and paste the following C# code into your project and replace the relevant info including the query string and you should be able to return data. I have commented several lines of code to assist in understanding what it is doing.   Lambda Expression. using System; using System.Data; using Oracle.DataAccess.Client;   namespace ConsoleApplication1 {     class Program     {         static void Main(string[] args)         {           try         {             //Setup DataSource             string oradb = "Data Source=(DESCRIPTION ="                                    + "(ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = hostname)(PORT = 1521)))"                                    + "(CONNECT_DATA = (SERVICE_NAME = SERVICENAME))) ;"                                    + "Persist Security Info=True;User ID=USER;Password=PASSWORD;";                        //Open Connection to Oracle - this could be moved outside the try.             OracleConnection conn = new OracleConnection(oradb);             conn.Open();               //Create cmd and use parameters to prevent SQL injection attacks.             OracleCommand cmd = new OracleCommand();             cmd.Connection = conn;               cmd.CommandText = "select username from table where username = :username";               OracleParameter p1 = new OracleParameter("username", OracleDbType.Varchar2);             p1.Value = username;             cmd.Parameters.Add(p1);               cmd.CommandType = CommandType.Text;               OracleDataReader dr = cmd.ExecuteReader();             dr.Read();               //Contains the value of the datarow             Console.WriteLine(dr["username"].ToString());               //Disposes of objects.             dr.Dispose();             cmd.Dispose();             conn.Dispose();         }           catch (OracleException ex) // Catches only Oracle errors         {             switch (ex.Number)             {                 case 1:                     Console.WriteLine("Error attempting to insert duplicate data.");                     break;                 case 12545:                     Console.WriteLine("The database is unavailable.");                     break;                 default:                     Console.WriteLine(ex.Message.ToString());                     break;             }         }           catch (Exception ex) // Catches any error not previously caught         {                   Console.WriteLine("Unidentified Error: " + ex.Message.ToString());              }         }       }           } At this point, you should have a working Program that returns data from an oracle database. If you are still having trouble then drop me a line and I will be happy to assist. As of this writing, oracle has announced the latest beta release of ODP.NET 11.2.0.1.1 Beta.  This release includes .NET Framework 4 and .NET Framework 4 Client Profile support. You may want to hold off on this version for a while as its BETA, and I wouldn’t want any production code using any BETA software.

  Read the article

• General Availability of Oracle E-Business Suite Plug-in 12.1.0.1.0

  - by user810030

  We are pleased to announce the General Availability of Oracle E-Business Suite Plug-in 12.1.0.1.0, an integral part of Application Management Suite for Oracle E-Business Suite. The combination of Enterprise Manager 12c Cloud Control and the Application Management Suite combines functionality that was available in the standalone Application Management Pack for Oracle E-Business Suite and Application Change Management Pack for Oracle E-Business Suite with Oracle’s Real User Experience Insight product and the Configuration & Compliance capabilities to provide the most complete solution for managing Oracle E-Business Suite applications. The features that were available in the standalone management packs are now packaged into the Oracle E-Business Suite Plug-in, which is now fully certified with Oracle Enterprise Manager 12c Cloud Control. This latest plug-in extends Cloud Control with E-Business Suite specific system management capabilities and features enhanced change management support. This new release offers the following key enhancements: General: Oracle Enterprise Manager 12c Base Platform uptake: All components of the management suite are certified with Oracle Enterprise Manager 12c Cloud Control. Security: Privilege Delegation: The Oracle E-Business Suite Plug-in now extends Enterprise Manager’s privilege delegation through Sudo and PowerBroker to Oracle E-Business Suite Plug-in host targets.  Privileges and Roles for Managing Oracle E-Business Suite: This release includes new ready-to-use target and resource privileges to monitor, manage, and perform Change Management functionality.  Cloning: Named Credentials Uptake in Cloning: The Clone module transactions now let users leverage the Named Credential feature introduced in Enterprise Manager 12c, thereby passing all the benefits of Named Credentials features in Enterprise Manager to the Oracle E-Business Suite Plug-in users.  Smart Clone improvements: The new and improved Smart Clone UI supports the adding of "pre and post" custom steps to a copy of the ready-to-use cloning deployment procedure. Now a user can pass parameters to the custom steps through the interview screen of the UI as well as pass ready-to-use parameters to the custom steps.  Change Management Enhancements Application Management Suite for Oracle E-Business Suite provides a centralized view to monitor and orchestrate changes (both functional and technical) across multiple Oracle E-Business Suite systems. In this latest release, it provides even more control and flexibility in managing Oracle E-Business Suite changes. Customization Manager: Support for longer file names: Customization Manager now handles file names up to thirty characters in length.  Patch Manager: Queuing of Patch Manager Runs: This feature allows patch runs to queue up if Patch Manager detects a specific target is in a blackout state.  Multi-node system patching: The patch run interview has been enhanced to allow Enterprise Manager Administrator to choose which nodes adpatch will run on.  New AD Administration Options: The patch run interview has been extended to include AD Administration Options "Relink Application Programs", "Generate Product Jars Files", "Generate Report Files", and "Generate Form Files".  Release Technical Details Product documentation for the plug-in is available on My Oracle Support as note 1434392.1.  The Oracle E-Business Suite Plug-in can be accessed in one of the following ways:  Fresh install  Enterprise Manager Store  Oracle Software Delivery Cloud Upgrades  Oracle Technology Network Please refer to the Application Management Pack for Oracle E-Business Suite Guide for further details.  Related Software Component Oracle Real User Experience Insight 12.1.0.0.1  Product documentation is available on Oracle Technology Network in the "Oracle Enterprise Manager 12c Release 1 (12.1) Documentation" set under the "Associated Document" tab. (http://docs.oracle.com/cd/E26370_01/index.htm)  Product may be downloaded individually from Oracle Technology Network software download page for Oracle Enterprise Manager under "Additional Enterprise Manager Downloads." (http://www.oracle.com/technetwork/oem/grid-control/downloads/index.html)  Product may also be downloaded individually from the Oracle Software Delivery Cloud. Select "Oracle Enterprise Manager" product pack, "Oracle Real User Experience Insight 12c Release 1 Media Pack for x8  Collateral Can be accessed on the Application Management Page on Oracle Technology Network

  Read the article

• How do I use setFilmSize in panda3d to achieve the correct view?

  - by lhk

  I'm working with Panda3d and recently switched my game to isometric rendering. I moved the virtual camera accordingly and set an orthographic lens. Then I implemented the classes "Map" and "Canvas". A canvas is a dynamically generated mesh: a flat quad. I'm using it to render the ingame graphics. Since the game itself is still set in a 3d coordinate system I'm planning to rely on these canvases to draw sprites. I could have named this class "Tile" but as I'd like to use it for non-tile sketches (enemies, environment) as well I thought canvas would describe it's function better. Map does exactly what it's name suggests. Its constructor receives the number of rows and columns and then creates a standard isometric map. It uses the canvas class for tiles. I'm planning to write a map importer that reads a file to create maps on the fly. Here's the canvas implementation: class Canvas: def __init__(self, texture, vertical=False, width=1,height=1): # create the mesh format=GeomVertexFormat.getV3t2() format = GeomVertexFormat.registerFormat(format) vdata=GeomVertexData("node-vertices", format, Geom.UHStatic) vertex = GeomVertexWriter(vdata, 'vertex') texcoord = GeomVertexWriter(vdata, 'texcoord') # add the vertices for a flat quad vertex.addData3f(1, 0, 0) texcoord.addData2f(1, 0) vertex.addData3f(1, 1, 0) texcoord.addData2f(1, 1) vertex.addData3f(0, 1, 0) texcoord.addData2f(0, 1) vertex.addData3f(0, 0, 0) texcoord.addData2f(0, 0) prim = GeomTriangles(Geom.UHStatic) prim.addVertices(0, 1, 2) prim.addVertices(2, 3, 0) self.geom = Geom(vdata) self.geom.addPrimitive(prim) self.node = GeomNode('node') self.node.addGeom(self.geom) # this is the handle for the canvas self.nodePath=NodePath(self.node) self.nodePath.setSx(width) self.nodePath.setSy(height) if vertical: self.nodePath.setP(90) # the most important part: "Drawing" the image self.texture=loader.loadTexture(""+texture+".png") self.nodePath.setTexture(self.texture) Now the code for the Map class class Map: def __init__(self,rows,columns,size): self.grid=[] for i in range(rows): self.grid.append([]) for j in range(columns): # create a canvas for the tile. For testing the texture is preset tile=Canvas(texture="../assets/textures/flat_concrete",width=size,height=size) x=(i-1)*size y=(j-1)*size # set the tile up for rendering tile.nodePath.reparentTo(render) tile.nodePath.setX(x) tile.nodePath.setY(y) # and store it for later access self.grid[i].append(tile) And finally the usage def loadMap(self): self.map=Map(10, 10, 1) this function is called within the constructor of the World class. The instantiation of world is the entry point to the execution. The code is pretty straightforward and runs good. Sadly the output is not as expected: Please note: The problem is not the white rectangle, it's my player object. The problem is that although the map should have equal width and height it's stretched weirdly. With orthographic rendering I expected the map to be a perfect square. What did I do wrong ? UPDATE: I've changed the viewport. This is how I set up the orthographic camera: lens = OrthographicLens() lens.setFilmSize(40, 20) base.cam.node().setLens(lens) You can change the "aspect" by modifying the parameters of setFilmSize. I don't know exactly how they are related to window size and screen resolution but after testing a little the values above seem to work for me. Now everything is rendered correctly as long as I don't resize the window. Every change of the window's size as well as switching to fullscreen destroys the correct rendering. I know that implementing a listener for resize events is not in the scope of this question. However I wonder why I need to make the Film's height two times bigger than its width. My window is quadratic ! Can you tell me how to find out correct setting for the FilmSize ? UPDATE 2: I can imagine that it's hard to envision the behaviour of the game. At first glance the obvious solution is to pass the window's width and height in pixels to setFilmSize. There are two problems with that approach. The parameters for setFilmSize are ingame units. You'll get a way to big view if you pass the pixel size For some strange reason the image is distorted if you pass equal values for width and height. Here's the output for setFilmSize(800,800) You'll have to stress your eyes but you'll see what I mean

  Read the article

• EPM troubleshooting Utilities

  - by THE

  (in via Maurice) "Are you keeping up-to-date with the latest troubleshooting utilities introduced from EPM 11.1.2.2? These are typically not described in product documentation, so you might miss references to them. The following five utilities may be run from the command line.(1) Deployment Report was introduced with EPM 11.1.2.2 (11 April 2012). It details logical web addresses, web servers, application ports, database connections, user directories, database repositories configured for the EPM system, data directories used by EPM system products, instance directories, FMW homes, deployment distory, et cetera. It also helps to keep you honest about whether you made changes to the system and at what times! Download Shared Services patch 13530721 to get the backported functionality in EPM 11.1.2.1. Run it from /Oracle/Middleware/user_projects/epmsystem1/bin/epmsys_registry.sh report deployment (on Unix/Linux)\Oracle\Middleware\user_projects\epmsystem1\bin\epmsys_registry.bat report deployment (on Microsoft Windows). The output is saved under \Oracle\Middleware\user_projects\epmsystem1\diagnostics\reports\deployment_report.html (2) Log Analysis has received more "press". It was released with EPM 11.1.2.3 and helps the user to slice and dice EPM logs. It has many parameters which are documented when run without parameters, when run with the -h parameter, or in the 'Readme' file. It has also been released as a standalone utility for EPM 11.1.2.3 and earlier versions. (Sign in to  My Oracle Support, click the 'Patches & Updates' tab, enter the patch number 17425397, and click the Search button. Download the appropriate platform-specific zip file, unzip, and read the 'Readme' file. Note that you must provide a proper value to a JAVA_HOME environment variable [pointer to the mother directory of the Java /bin subdirectory] in the loganalysis.bat | .sh file and use the -d parameter when running standalone.) Run it from /Oracle/Middleware/user_projects/epmsystem1/bin/loganalysis.sh -h (on Unix/Linux)\Oracle\Middleware\user_projects\epmsystem1\bin\loganalysis.bat -h (on Microsoft Windows). The output is saved under the \Oracle\Middleware\user_projects\epmsystem1\diagnostics\reports\ subdirectory. (3) The Registry Cleanup command may be used (without fear!) to clean up various corruptions which can  affect the Hyperion (database-based) Repository. Run it from /Oracle/Middleware/user_projects/epmsystem1/bin/registry-cleanup.sh (on Unix/Linux)\Oracle\Middleware\user_projects\epmsystem1\bin\registry-cleanup.bat (on Microsoft Windows). The actions are described on the command line. (4) The Remove Instance Command is only used if there are two or more instances configured on one computer and one of those should be deleted. Run it from /Oracle/Middleware/user_projects/epmsystem1/bin/remove-instance.sh (on Unix/Linux)\Oracle\Middleware\user_projects\epmsystem1\bin\remove-instance.bat (on Microsoft Windows). (5) The Reset Configuration Tool was introduced with EPM 11.1.2.2. It nullifies Shared Services Hyperion Registry settings so that a service may be reconfigured. You may locate the values to substitute for <product> or <task> by scanning registry.html (generated by running epmsys_registry.bat | .sh). Find productNAME in INSTANCE_TASKS_CONFIGURATION and SYSTEM_TASKS_CONFIGURATION nodes and identify tasks by property pairs that have values of 'Configurated' or 'Pending'. Run it from /Oracle/Middleware/user_projects/epmsystem1/bin/resetConfigTask.sh -product <product> -task <task> (on Unix/Linux)\Oracle\Middleware\user_projects\epmsystem1\bin\resetConfigTask.bat -product <product> -task <task> (on Microsoft Windows). "Thanks to Maurice for this collection of utilities.

  Read the article

• Changes in Language Punctuation [closed]

  - by Wes Miller

  More social curiosity than actual programming question... (I got shot for posting this on Stack Overflow. They sent me here. At least i hope here is where they meant.) Based on the few responses I got before the content police ran me off Stack Overflow, I should note that I am legally blind and neatness and consistency in programming are my best friends. A thousand years ago when I took my first programming class (Fortran 66) and a mere 500 years ago when I tokk my first C and C++ classes, there were some pretty standard punctuation practices across languages. I saw them in Basic (shudder), PL/1, PL/AS, Rexx even Pascal. Ok, APL2 is not part of this discussion. Each language has its own peculiar punctuation. Pascal's periods, Fortran's comma separated do loops, almost everybody else's semicolons. As I learned it, each language also has KEYWORDS (if, for, do, while, until, etc.) which are set off by whitespace (or the left margin) if, etc. Each language has function, subroutines of whatever they're called. Some built-in some user coded. They were set off by function_name( parameters );. As in sqrt( x ) or rand( y ); Lately, there seems to be a new set of punctuation rules. Especially in c++ where initializers get glued onto the end of variable declarations int x(0); or auto_ptr p(new gizmo); This usually, briefly fools me into thinking someone is declaring a function prototype or using a function as a integer. Then "if" and 'for' seems to have grown parens; if(true) for(;;), etc. Since when did keywords become functions. I realize some people think they ARE functions with iterators as parameters. But if "for" is a function, where did the arg separating commas go? And finally, functions seem to have shed their parens; sqrt (2) select (...) I know, I koow, loosening whitespace rules is good. Keep reading. Question: when did the old ways disappear and this new way come into vogue? Does anyone besides me find it irritating to read and that the information that the placement of punctuation used to convey is gone? I know full well that K&R put the { at the end of the "if" or "for" to save a byte here and there. Can't use that excuse here. Space as an excuse for loss of readability died as HDD space soared past 100 MiB. Your thoughts are solicited. If there is a good reason to do this, I'll gladly learn it and maybe in another 50 years I'll get used to it. Of course it's good that compilers recognize these (IMHO) typos and keep right on going, but just because you CAN code it that way doesn't mean you HAVE to, right?

  Read the article

• PowerShell Script To Find Where SharePoint 2010 Features Are Activated

  - by Brian Jackett

  The script on this post will find where features are activated within your SharePoint 2010 farm.   Problem    Over the past few months I’ve gotten literally dozens of emails, blog comments, or personal requests from people asking “how do I find where a SharePoint feature has been activated?”  I wrote a script to find which features are installed on your farm almost 3 years ago.  There is also the Get-SPFeature PowerShell commandlet in SharePoint 2010.  The problem is that these only tell you if a feature is installed not where they have been activated.  This is especially important to know if you have multiple web applications, site collections, and /or sites.   Solution    The default call (no parameters) for Get-SPFeature will return all features in the farm.  Many of the parameter sets accept filters for specific scopes such as web application, site collection, and site.  If those are supplied then only the enabled / activated features are returned for that filtered scope.  Taking the concept of recursively traversing a SharePoint farm and merging that with calls to Get-SPFeature at all levels of the farm you can find out what features are activated at that level.  Store the results into a variable and you end up with all features that are activated at every level.    Below is the script I came up with (slight edits for posting on blog).  With no parameters the function lists all features activated at all scopes.  If you provide an Identity parameter you will find where a specific feature is activated.  Note that the display name for a feature you see in the SharePoint UI rarely matches the “internal” display name.  I would recommend using the feature id instead.  You can download a full copy of the script by clicking on the link below.    Note: This script is not optimized for medium to large farms.  In my testing it took 1-3 minutes to recurse through my demo environment.  This script is provided as-is with no warranty.  Run this in a smaller dev / test environment first.   001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 016 017 018 019 020 021 022 023 024 025 026 027 028 029 030 031 032 033 034 035 036 037 038 039 040 041 042 043 044 045 046 047 048 049 050 051 052 053 054 055 056 057 058 059 060 061 062 063 064 065 066 067 068 function Get-SPFeatureActivated { # see full script for help info, removed for formatting [CmdletBinding()] param(   [Parameter(position = 1, valueFromPipeline=$true)]   [Microsoft.SharePoint.PowerShell.SPFeatureDefinitionPipeBind]   $Identity )#end param   Begin   {     # declare empty array to hold results. Will add custom member `     # for Url to show where activated at on objects returned from Get-SPFeature.     $results = @()         $params = @{}   }   Process   {     if([string]::IsNullOrEmpty($Identity) -eq $false)     {       $params = @{Identity = $Identity             ErrorAction = "SilentlyContinue"       }     }       # check farm features     $results += (Get-SPFeature -Farm -Limit All @params |              % {Add-Member -InputObject $_ -MemberType noteproperty `                 -Name Url -Value ([string]::Empty) -PassThru} |              Select-Object -Property Scope, DisplayName, Id, Url)     # check web application features     foreach($webApp in (Get-SPWebApplication))     {       $results += (Get-SPFeature -WebApplication $webApp -Limit All @params |                % {Add-Member -InputObject $_ -MemberType noteproperty `                   -Name Url -Value $webApp.Url -PassThru} |                Select-Object -Property Scope, DisplayName, Id, Url)       # check site collection features in current web app       foreach($site in ($webApp.Sites))       {         $results += (Get-SPFeature -Site $site -Limit All @params |                  % {Add-Member -InputObject $_ -MemberType noteproperty `                     -Name Url -Value $site.Url -PassThru} |                  Select-Object -Property Scope, DisplayName, Id, Url)                          $site.Dispose()         # check site features in current site collection         foreach($web in ($site.AllWebs))         {           $results += (Get-SPFeature -Web $web -Limit All @params |                    % {Add-Member -InputObject $_ -MemberType noteproperty `                       -Name Url -Value $web.Url -PassThru} |                    Select-Object -Property Scope, DisplayName, Id, Url)           $web.Dispose()         }       }     }   }   End   {     $results   } } #end Get-SPFeatureActivated   Snippet of output from Get-SPFeatureActivated   Conclusion    This script has been requested for a long time and I’m glad to finally getting a working “clean” version.  If you find any bugs or issues with the script please let me know.  I’ll be posting this to the TechNet Script Center after some internal review.  Enjoy the script and I hope it helps with your admin / developer needs.         -Frog Out

  Read the article

• Find Knowledge Quickly

  - by Get Proactive Customer Adoption Team

  Untitled Document Get to relevant knowledge on the Oracle products you use in a few quick steps! Customers tell us that the volume of search results returned can make it difficult to find the information they need, especially when similar Oracle products exist. These simple tips show you how to filter, browse, search, and refine your results to get relevant answers faster. Filter first: PowerView is your best friend Powerview is an often ignored feature of My Oracle Support that enables you to control the information displayed on the Dashboard, the Knowledge tab and regions, and the Service Request tab based on one or more parameters. You can define a PowerView to limit information based on product, product line, support ID, platform, hostname, system name and others. Using PowerView allows you to restrict: Your search results to the filters you have set The product list when selecting your products in Search & Browse and when creating service requests   The PowerView menu is at the top of My Oracle Support, near the title You turn PowerView on by clicking PowerView is Off, which is a button. When PowerView is On, and filters are active, clicking the button again will toggle Powerview off. Click the arrow to the right to create new filters, edit filters, remove a filter, or choose from the list of previously created filters. You can create a PowerView in 3 simple steps! Turn PowerView on and select New from the PowerView menu. Select your filter from the Select Filter Type dropdown list and make selections from the other two menus. Hint: While there are many filter options, selecting your product line or your list of products will provide you with an effective filter. Click the plus sign (+) to add more filters. Click the minus sign (-) to remove a filter. Click Create to save and activated the filter(s) You’ll notice that PowerView is On displays along with the active filters. For more information about the PowerView capabilities, click the Learn more about PowerView… menu item or view a short video. Browse & Refine: Access the Best Match Fast For Your Product and Task In the Knowledge Browse region of the Knowledge or Dashboard tabs, pick your product, pick your task, select a version, if applicable. A best match document – a collection of knowledge articles and resources specific to your selections - may display, offering you a one-stop shop. The best match document, called an “information center,” is an aggregate of dynamically updated links to information pertinent to the product, task, and version (if applicable) you chose. These documents are refreshed every 24 hours to ensure that you have the most current information at your fingertips. Note: Not all products have “information centers.” If no information center appears as a best match, click Search to see a list of search results. From the information center, you can access topics from a product overview to security information, as shown in the left menu. Just want to search? That’s easy too! Again, pick your product, pick your task, select a version, if applicable, enter a keyword term, and click Search. Hint: In this example, you’ll notice that PowerView is on and set to PeopleSoft Enterprise. When PowerView is on and you select a product from the Knowledge Base product list, the listed products are limited to the active PowerView filter. (Products you’ve previously picked are also listed at the top of the dropdown list.) Your search results are displayed based on the parameters you entered. It’s that simple! Related Information: My Oracle Support - User Resource Center [ID 873313.1] My Oracle Support Community For more tips on using My Oracle Support, check out these short video training modules. My Oracle Support Speed Video Training [ID 603505.1]

  Read the article

• Drawing random smooth lines contained in a square [migrated]

  - by Doug Mercer

  I'm trying to write a matlab function that creates random, smooth trajectories in a square of finite side length. Here is my current attempt at such a procedure: function [] = drawroutes( SideLength, v, t) %DRAWROUTES Summary of this function goes here % Detailed explanation goes here %Some parameters intended to help help keep the particles in the box RandAccel=.01; ConservAccel=0; speedlimit=.1; G=10^(-8); % %Initialize Matrices Ax=zeros(v,10*t); Ay=Ax; vx=Ax; vy=Ax; x=Ax; y=Ax; sx=zeros(v,1); sy=zeros(v,1); % %Define initial position in square x(:,1)=SideLength*.15*ones(v,1)+(SideLength*.7)*rand(v,1); y(:,1)=SideLength*.15*ones(v,1)+(SideLength*.7)*rand(v,1); % for i=2:10*t %Measure minimum particle distance component wise from boundary %for each vehicle BorderGravX=[abs(SideLength*ones(v,1)-x(:,i-1)),abs(x(:,i-1))]'; BorderGravY=[abs(SideLength*ones(v,1)-y(:,i-1)),abs(y(:,i-1))]'; rx=min(BorderGravX)'; ry=min(BorderGravY)'; % %Set the sign of the repulsive force for k=1:v if x(k,i)<.5*SideLength sx(k)=1; else sx(k)=-1; end if y(k,i)<.5*SideLength sy(k)=1; else sy(k)=-1; end end % %Calculate Acceleration w/ random "nudge" and repulive force Ax(:,i)=ConservAccel*Ax(:,i-1)+RandAccel*(rand(v,1)-.5*ones(v,1))+sx*G./rx.^2; Ay(:,i)=ConservAccel*Ay(:,i-1)+RandAccel*(rand(v,1)-.5*ones(v,1))+sy*G./ry.^2; % %Ad hoc method of trying to slow down particles from jumping outside of %feasible region for h=1:v if abs(vx(h,i-1)+Ax(h,i))<speedlimit vx(h,i)=vx(h,i-1)+Ax(h,i); elseif (vx(h,i-1)+Ax(h,i))<-speedlimit vx(h,i)=-speedlimit; else vx(h,i)=speedlimit; end end for h=1:v if abs(vy(h,i-1)+Ay(h,i))<speedlimit vy(h,i)=vy(h,i-1)+Ay(h,i); elseif (vy(h,i-1)+Ay(h,i))<-speedlimit vy(h,i)=-speedlimit; else vy(h,i)=speedlimit; end end % %Update position x(:,i)=x(:,i-1)+(vx(:,i-1)+vx(:,i))/2; y(:,i)=y(:,i-1)+(vy(:,i-1)+vy(:,1))/2; % end %Plot position clf; hold on; axis([-100,SideLength+100,-100,SideLength+100]); cc=hsv(v); for j=1:v plot(x(j,1),y(j,1),'ko') plot(x(j,:),y(j,:),'color',cc(j,:)) end hold off; % end My original plan was to place particles within a square, and move them around by allowing their acceleration in the x and y direction to be governed by a uniformly distributed random variable. To keep the particles within the square, I tried to create a repulsive force that would push the particles away from the boundaries of the square. In practice, the particles tend to leave the desired "feasible" region after a relatively small number of time steps (say, 1000)." I'd love to hear your suggestions on either modifying my existing code or considering the problem from another perspective. When reading the code, please don't feel the need to get hung up on any of the ad hoc parameters at the very beginning of the script. They seem to help, but I don't believe any beside the "G" constant should truly be necessary to make this system work. Here is an example of the current output: Many of the vehicles have found their way outside of the desired square region, [0,400] X [0,400].

  Read the article

• Parameterized StreamInsight Queries

  - by Roman Schindlauer

  The changes in our APIs enable a set of scenarios that were either not possible before or could only be achieved through workarounds. One such use case that people ask about frequently is the ability to parameterize a query and instantiate it with different values instead of re-deploying the entire statement. I’ll demonstrate how to do this in StreamInsight 2.1 and combine it with a method of using subjects for dynamic query composition in a mini-series of (at least) two blog articles. Let’s start with something really simple: I want to deploy a windowed aggregate to a StreamInsight server, and later use it with different window sizes. The LINQ statement for such an aggregate is very straightforward and familiar: var result = from win in stream.TumblingWindow(TimeSpan.FromSeconds(5))               select win.Avg(e => e.Value); Obviously, we had to use an existing input stream object as well as a concrete TimeSpan value. If we want to be able to re-use this construct, we can define it as a IQStreamable: var avg = myApp     .DefineStreamable((IQStreamable<SourcePayload> s, TimeSpan w) =>         from win in s.TumblingWindow(w)         select win.Avg(e => e.Value)); The DefineStreamable API lets us define a function, in our case from a IQStreamable (the input stream) and a TimeSpan (the window length) to an IQStreamable (the result). We can then use it like a function, with the input stream and the window length as parameters: var result = avg(stream, TimeSpan.FromSeconds(5)); Nice, but you might ask: what does this save me, except from writing my own extension method? Well, in addition to defining the IQStreamable function, you can actually deploy it to the server, to make it re-usable by another process! When we deploy an artifact in V2.1, we give it a name: var avg = myApp     .DefineStreamable((IQStreamable<SourcePayload> s, TimeSpan w) =>         from win in s.TumblingWindow(w)         select win.Avg(e => e.Value))     .Deploy("AverageQuery"); When connected to the same server, we can now use that name to retrieve the IQStreamable and use it with our own parameters: var averageQuery = myApp     .GetStreamable<IQStreamable<SourcePayload>, TimeSpan, double>("AverageQuery"); var result = averageQuery(stream, TimeSpan.FromSeconds(5)); Convenient, isn’t it? Keep in mind that, even though the function “AverageQuery” is deployed to the server, its logic will still be instantiated into each process when the process is created. The advantage here is being able to deploy that function, so another client who wants to use it doesn’t need to ask the author for the code or assembly, but just needs to know the name of deployed entity. A few words on the function signature of GetStreamable: the last type parameter (here: double) is the payload type of the result, not the actual result stream’s type itself. The returned object is a function from IQStreamable<SourcePayload> and TimeSpan to IQStreamable<double>. In the next article we will integrate this usage of IQStreamables with Subjects in StreamInsight, so stay tuned! Regards, The StreamInsight Team

  Read the article

• Where is the documentation for MSBUILD arguments to run MSDEPLOY?

  - by Simon_Weaver

  There is an excellent PDC talk available here which describes the new MSDEPLOY features in Visual Studio 2010 - as well as how to deploy an application within TFS. The talk explains some of the command line parameters such as : /p:DeployOnBuild /p:DeployTarget=MsDeployPublish /p:CreatePackageOnPublish=True /p:MSDeployPublishMethod=InProc /p:MSDeployServiceURL=localhost /p:DeployIISAppApth="Default Web Site" But where is the documentation for this - explaining how they work and what i should use? Most of these turn up very few or zero results when searching. Isn't there some actual documentation for these parameters somewhere? I'd rather use these to deploy than try to add a command line exec command to run the package. I've managed to create a web deployment package, which TFS is copying to the output. But I'm ending up with all kinds of errors trying to actually deploy the package. Currently in my build configuration in TFS I have the following arguments for MSBuild Arguments /p:DeployOnBuild=True /p:DeployTarget=MsDeployPublish /p:Configuration=Release /p:CreatePackageOnPublish=True /p:DeployIisAppPath=staging.example.com /p:MsDeployServiceUrl=localhost This however gives me this error : Is there any actual real documentation for these arguments? It would probably take me about 5 minutes to get it running the package by the command line, but i want to get them deploying like this because it will simplify multiple configurations later.

  Read the article

• How can I get TFS2010 to run MSDEPLOY for me through MSBUILD?

  - by Simon_Weaver

  There is an excellent PDC talk available here which describes the new MSDEPLOY features in Visual Studio 2010 - as well as how to deploy an application within TFS. You can use MSBUILD within TFS2010 to call through to MSDEPLOY to deploy your package to IIS. This is done by means of parameters to MSBUILD. The talk explains some of the command line parameters such as : /p:DeployOnBuild /p:DeployTarget=MsDeployPublish /p:CreatePackageOnPublish=True /p:MSDeployPublishMethod=InProc /p:MSDeployServiceURL=localhost /p:DeployIISAppPath="Default Web Site" But where is the documentation for this - I can't find any? I've been spending all day trying to get this to work and can't quite get it right and keep ending up with various errors. If I run the package's cmd file it deploys perfectly. But I want to get the whole deployment running through msbuild using these arguments and not a separate call to msdeploy or running the package .cmd file. How can I do this? PS. Yes I do have the Web Deployment Agent Service running. I also have the management service running under IIS. I've tried using both. Args I'm using : /p:DeployOnBuild=True /p:DeployTarget=MsDeployPublish /p:Configuration=Release /p:CreatePackageOnPublish=True /p:DeployIisAppPath=staging.example.com /p:MsDeployServiceUrl=https://staging.example.com:8172/msdeploy.axd /p:AllowUntrustedCertificate=True giving me : C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v10.0\Web\Microsoft.Web.Publishing.targets (2660): VsMsdeploy failed.(Remote agent (URL https://staging.example.com:8172/msdeploy.axd?site=staging.example.com) could not be contacted. Make sure the remote agent service is installed and started on the target computer.) Error detail: Remote agent (URL https://staging.example.com:8172/msdeploy.axd?site=staging.example.com) could not be contacted. Make sure the remote agent service is installed and started on the target computer. An unsupported response was received. The response header 'MSDeploy.Response' was '' but 'v1' was expected. The remote server returned an error: (401) Unauthorized.

  Read the article

• How to change TXSDateTime SOAP serialization in Delphi 7?

  - by LukLed

  I am trying to use Java based webservice and have soap request: <?xml version="1.0"?> <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/"> <SOAP-ENV:Body xmlns:NS1="http://something/"> <NS1:getRequest id="1"> <sessionId xsi:type="xsd:string"></sessionId> <reportType xsi:type="NS1:reportType">ALL</reportType> <xsd:dateFrom xsi:type="xsd:dateTime">2010-05-30T23:29:43.088+02:00</xsd:dateFrom> <xsd:dateTo xsi:type="xsd:dateTime">2010-05-31T23:29:43.728+02:00</xsd:dateTo> </NS1:getRequest> <parameters href="#1" /> </SOAP-ENV:Body> </SOAP-ENV:Envelope> It doesn't work, because webservice doesn't recognize dates as parameters. When I change <xsd:dateFrom xsi:type="xsd:dateTime">2010-05-30T23:29:43.088+02:00</xsd:dateFrom> <xsd:dateTo xsi:type="xsd:dateTime">2010-05-31T23:29:43.728+02:00</xsd:dateTo> to <dateFrom xsi:type="xsd:dateTime">2010-05-30T23:29:43.088+02:00</xsd:dateFrom> <dateTo xsi:type="xsd:dateTime">2010-05-31T23:29:43.728+02:00</xsd:dateTo> everything works ok, but Delphi (without Delphi source code changes) doesn't allow to change generated XML, it has only some options. Is it possible to set conversion options, so TSXDateTime is converted to <dateFrom, not <xsd:dateFrom tag? Did you meet that problem?

  Read the article

• How to Authenticate to Active Directory Services (ADs) using .NET 3.5 / C#

  - by Ranger Pretzel

  After much struggling, I've figured out how to authenticate to my company's Active Directory using just 2 lines of code with the Domain, Username, and Password in .NET 2.0 (in C#): // set domain, username, password, and security parameters DirectoryEntry entry = new DirectoryEntry("LDAP://" + domain, username, password, AuthenticationTypes.Secure | AuthenticationTypes.SecureSocketsLayer); // force Bind to AD server to authenticate object obj = entry.NativeObject; If the 2nd line throws an exception, then the credentials and/or parameters were bad. (Specific reason can be found in the exception.) If no exception, then the credentials are good. Trying to do this in .NET 3.5 looks like it should be easy, but has me at a roadblock instead. Specifically, I've been working with this example: PrincipalContext domainContext = new PrincipalContext(ContextType.Domain, domain); using (domainContext) { return domainContext.ValidateCredentials(UserName, Password); } Unfortunately, this doesn't work for me as I don't have both ContextOptions set to Sealed/Secure and SSL (like I did above in the .NET 2.0 code.) There is an alternate constructor for PrincipalContext that allows setting the ContextOptions, but this also requires supplying a Distinguished Name (DN) of a Container Object and I don't know exactly what mine is or how I would find out. public PrincipalContext(ContextType contextType, string name, string container, ContextOptions options); // container: // The container on the store to use as the root of the context. All queries // are performed under this root, and all inserts are performed into this container. // For System.DirectoryServices.AccountManagement.ContextType.Domain and System.DirectoryServices.AccountManagement.ContextType.ApplicationDirectory // context types, this parameter is the distinguished name of a container object. Any suggestions?

  Read the article

• Calling WCF service with parameter using jQuery

  - by Remi Despres-Smyth

  I'm trying to call a WCF web service hosted by IIS using jQuery. I can call it fine without any parameters, and I can also call it fine with a GET request that includes my parameter, but as soon as I try to send in the request via POST, the call is failing. The web service is currently nothing but: [OperationContract, WebInvoke] public ValidationResultSummary TestValidateOn( object day) { return null; } I've set the parameter to object, to make sure the issue isn't something with type coercion. With a breakpoint in the web service, I know the call without parameters as well as the GET call with param succeeds; in the latter the expected value is sent up. Calling code looks like: $.ajax({ // type: "GET", // url: "../Shared/Services/DomainServices.svc/TestValidateOn?day='12/Jan/2010'", type: "POST", url: "../Shared/Services/DomainServices.svc/TestValidateOn", // data: "{ }", --This works if object type param, calls with null data: "{'day': " + selectedDate + "}", // This fails miserably // data: "{'day': '" + selectedDate + "'}", --This also fails miserably contentType: "application/json; charset=utf-8", dataType: "json", success: function(data) { displayResults(data.d); }, error: function(xmlHttpReq, status, errThrown) { displayError(xmlHttpReq, status, errThrown); } }); The POST call never reaches my breakpoint, and on the client, error 500 - "Internal Server Error" - is returned. Any help would be appreciated.

  Read the article

• Camera Preview App in Android throwing many errors (Nexus 4)

  - by Jagatheesan Jack

  I am trying to develop a camera app that takes a picture and saves it in a SQLite database. I get a lot of errors when executing the application. My code is as below. Any idea? CameraActivity.java private Camera mCamera; private CameraPreview mPreview; private int CAMERA_RETURN_CODE=100; private static final String TAG = "Take_Picture"; public static final int MEDIA_TYPE_IMAGE = 1; public static final int MEDIA_TYPE_VIDEO = 2; private Bitmap cameraBmp; private int MAX_FACES = 1; private Face[] faceList; public RectF[] rects; private Canvas canvas; private Drawable pictureDataDrawable; private MySQLiteHelper database; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.camera_activity); //this.requestWindowFeature(Window.FEATURE_NO_TITLE); //Create an instance of Camera mCamera = getCameraInstance(); setCameraDisplayOrientation(this, 0, mCamera); // Create our Preview view and set it as the content of our activity. mPreview = new CameraPreview(this, mCamera); FrameLayout preview = (FrameLayout) findViewById(R.id.camera_preview); preview.addView(mPreview); database = new MySQLiteHelper(getApplicationContext()); Button captureButton = (Button) findViewById(R.id.button_capture); captureButton.setOnClickListener( new View.OnClickListener() { private PictureCallback mPicture; @Override public void onClick(View v) { //mCamera.startPreview(); // get an image from the camera mCamera.takePicture(null, null, mPicture); PictureCallback mPicture = new PictureCallback() { @Override public void onPictureTaken(byte[] data, Camera camera) { try{ if (data != null) database.addEntry(data); //mCamera.startPreview(); } catch(Exception e){ Log.d(TAG, e.getMessage()); } } } ); } /** A safe way to get an instance of the Camera object. */ public static Camera getCameraInstance(){ Camera c = null; try { c = Camera.open(c.getNumberOfCameras()-1); // attempt to get a Camera instance } catch (Exception e){ // Camera is not available (in use or does not exist) } return c; // returns null if camera is unavailable } public static void setCameraDisplayOrientation(Activity activity, int cameraId, android.hardware.Camera camera) { android.hardware.Camera.CameraInfo info = new android.hardware.Camera.CameraInfo(); android.hardware.Camera.getCameraInfo(cameraId, info); int rotation = activity.getWindowManager().getDefaultDisplay() .getRotation(); int degrees = 360; /*switch (rotation) { case Surface.ROTATION_0: degrees = 0; break; case Surface.ROTATION_90: degrees = 90; break; case Surface.ROTATION_180: degrees = 180; break; case Surface.ROTATION_270: degrees = 270; break; }*/ int result; if (info.facing == Camera.CameraInfo.CAMERA_FACING_FRONT) { result = (info.orientation + degrees) % 360; result = (360 - result) % 360; // compensate the mirror } else { // back-facing result = (info.orientation - degrees + 360) % 360; } camera.setDisplayOrientation(result); } @Override protected void onPause() { super.onPause(); //releaseMediaRecorder(); // if you are using MediaRecorder, release it first releaseCamera(); // release the camera immediately on pause event } private void releaseCamera(){ if (mCamera != null){ mCamera.release(); // release the camera for other applications mCamera = null; } } public void startFaceDetection(){ // Try starting Face Detection Camera.Parameters params = mCamera.getParameters(); // start face detection only *after* preview has started if (params.getMaxNumDetectedFaces() > 0){ // camera supports face detection, so can start it: mCamera.startFaceDetection(); } } CameraPreview.java public class CameraPreview extends SurfaceView implements SurfaceHolder.Callback { private SurfaceHolder mHolder; private Camera mCamera; private String TAG; private List<Size> mSupportedPreviewSizes; public CameraPreview(Context context, Camera camera) { super(context); mCamera = camera; // Install a SurfaceHolder.Callback so we get notified when the // underlying surface is created and destroyed. mHolder = getHolder(); mHolder.addCallback(this); // deprecated setting, but required on Android versions prior to 3.0 mHolder.setType(SurfaceHolder.SURFACE_TYPE_PUSH_BUFFERS); } public void surfaceCreated(SurfaceHolder holder) { // The Surface has been created, now tell the camera where to draw the preview. try { mCamera.setPreviewDisplay(holder); mCamera.setDisplayOrientation(90); mCamera.startPreview(); } catch (IOException e) { Log.d(TAG, "Error setting camera preview: " + e.getMessage()); } } public void surfaceDestroyed(SurfaceHolder holder) { // empty. Take care of releasing the Camera preview in your activity. } public void surfaceChanged(SurfaceHolder holder, int format, int w, int h) { // If your preview can change or rotate, take care of those events here. // Make sure to stop the preview before resizing or reformatting it. if (mHolder.getSurface() == null){ // preview surface does not exist return; } // stop preview before making changes try { mCamera.stopPreview(); } catch (Exception e){ // ignore: tried to stop a non-existent preview } try { mCamera.setPreviewDisplay(mHolder); mCamera.startPreview(); } catch (Exception e){ Log.d(TAG, "Error starting camera preview: " + e.getMessage()); } } public void setCamera(Camera camera) { if (mCamera == camera) { return; } mCamera = camera; if (mCamera != null) { List<Size> localSizes = mCamera.getParameters().getSupportedPreviewSizes(); mSupportedPreviewSizes = localSizes; requestLayout(); try { mCamera.setPreviewDisplay(mHolder); } catch (IOException e) { e.printStackTrace(); } /* Important: Call startPreview() to start updating the preview surface. Preview must be started before you can take a picture. */ mCamera.startPreview(); } } MySQLiteHelper.java private static final int count = 0; public static final String TABLE_IMAGE = "images"; public static final String COLUMN_ID = "_id"; public static final String PICTURE_DATA = "picture"; public static final String DATABASE_NAME = "images.db"; public static final int DATABASE_VERSION = 1; public static final String DATABASE_CREATE = "create table " + TABLE_IMAGE + "(" + COLUMN_ID + " integer primary key autoincrement, " + PICTURE_DATA + " blob not null);"; public static SQLiteDatabase database; private static String TAG = "test"; public MySQLiteHelper(Context context) { super(context, DATABASE_NAME, null, DATABASE_VERSION); // TODO Auto-generated constructor stub } public MySQLiteHelper(Context context, String name, CursorFactory factory, int version, DatabaseErrorHandler errorHandler) { super(context, name, factory, version, errorHandler); // TODO Auto-generated constructor stub } @Override public void onCreate(SQLiteDatabase database) { database.execSQL(DATABASE_CREATE); } @Override public void onUpgrade(SQLiteDatabase db, int oldVersion, int newVersion) { Log.w(MySQLiteHelper.class.getName(), "Upgrading database from version " + oldVersion + " to " + newVersion + ", which will destroy all old data"); db.execSQL("DROP TABLE IF EXISTS " + TABLE_IMAGE); onCreate(db); } /** * @param args */ public static void main(String[] args) { // TODO Auto-generated method stub } public void addEntry(byte [] array) throws SQLiteException{ ContentValues cv = new ContentValues(); //cv.put(KEY_NAME, name); cv.put(PICTURE_DATA, array); database.insert( TABLE_IMAGE, null, cv ); Log.w(TAG , "added " +count+ "images"); database.close(); } Errors 11-07 23:28:39.050: E/mm-libcamera2(176): PROFILE HAL: stopPreview(): E: 1383838119.067589459 11-07 23:28:39.050: E/mm-camera(201): config_MSG_ID_STOP_ACK: streamon_mask is not clear. Should not call PP_Release_HW 11-07 23:28:39.090: E/QCameraHWI(176): android::status_t android::QCameraHardwareInterface::setPreviewWindow(preview_stream_ops_t*):Received Setting NULL preview window 11-07 23:28:39.090: E/QCameraHWI(176): android::status_t android::QCameraHardwareInterface::setPreviewWindow(preview_stream_ops_t*): mPreviewWindow = 0x0x0, mStreamDisplay = 0x0xb8a9df90 11-07 23:28:39.090: E/mm-camera(201): config_shutdown_pp Camera not in streaming mode. Returning. 11-07 23:28:39.090: E/mm-camera(201): vfe_ops_deinit: E 11-07 23:28:39.120: E/qcom_sensors_hal(533): hal_process_report_ind: Bad item quality: 11 11-07 23:28:39.310: E/qcom_sensors_hal(533): hal_process_report_ind: Bad item quality: 11 11-07 23:28:39.330: E/mm-camera(201): sensor_load_chromatix: libchromatix_imx119_preview.so: 30 11-07 23:28:39.340: E/mm-camera(201): vfe_ops_init: E 11-07 23:28:39.360: E/mm-camera(201): vfe_legacy_stats_buffer_init: AEC_STATS_BUFNUM 11-07 23:28:39.360: E/mm-camera(201): vfe_legacy_stats_buffer_init: AEC_STATS_BUFNUM 11-07 23:28:39.360: E/mm-camera(201): mctl_init_stats_proc_info: snap_max_line_cnt =25776 11-07 23:28:39.440: E/QCameraHWI(176): android::status_t android::QCameraHardwareInterface::setPreviewWindow(preview_stream_ops_t*): mPreviewWindow = 0x0xb8aa1780, mStreamDisplay = 0x0xb8a9df90 11-07 23:28:39.440: E/mm-camera(201): config_proc_CAMERA_SET_INFORM_STARTPREVIEW 11-07 23:28:39.450: E/mm-camera(201): config_update_stream_info Storing stream parameters for video inst 1 as : width = 640, height 480, format = 1 inst_handle = 810081 cid = 0 11-07 23:28:39.490: E/mm-camera(201): config_update_stream_info Storing stream parameters for video inst 3 as : width = 640, height 480, format = 1 inst_handle = 830083 cid = 0 11-07 23:28:39.490: E/mm-camera(201): config_update_stream_info Storing stream parameters for video inst 4 as : width = 512, height 384, format = 1 inst_handle = 840084 cid = 0 11-07 23:28:39.500: E/mm-camera(201): config_decide_vfe_outputs: Ports Used 3, Op mode 1 11-07 23:28:39.500: E/mm-camera(201): config_decide_vfe_outputs Current mode 0 Full size streaming : Disabled 11-07 23:28:39.500: E/mm-camera(201): config_decide_vfe_outputs: Primary: 640x480, extra_pad: 0x0, Fmt: 1, Type: 1, Path: 1 11-07 23:28:39.500: E/mm-camera(201): config_decide_vfe_outputs: Secondary: 640x480, extra_pad: 0x0, Fmt: 1, Type: 3, Path: 4 11-07 23:28:39.510: E/mm-camera(201): config_update_inst_handles Updated the inst handles as 810081, 830083, 0, 0 11-07 23:28:39.631: E/mm-camera(201): sensor_load_chromatix: libchromatix_imx119_preview.so: 30 11-07 23:28:39.631: E/mm-camera(201): camif_client_set_params: camif has associated with obj mask 0x1 11-07 23:28:39.631: E/mm-camera(201): config_v2_CAMERA_START_common CAMIF_PARAMS_ADD_OBJ_ID failed -1 11-07 23:28:39.641: E/mm-camera(201): vfe_operation_config: format 3 11-07 23:28:39.641: E/mm-camera(201): vfe_operation_config:vfe_op_mode=5 11-07 23:28:39.641: E/mm-camera(201): Invalid ASD Set Params Type 11-07 23:28:39.641: E/mm-camera(201): vfe_set_bestshot: Bestshot mode not changed

  Read the article

• Ado.net dataservices BeginExecuteBatch call works on development fails on production server with Obj

  - by Mike Morley

  We have an ado.net dataservices 1.0 call that is being passed to a [WebGet] service operation as a batch through BeginExecuteBatch. Everything works perfectly on our development server - we have the project configured to use IIS instead of the cassini web server to make it as close to our production server as we can. When we publish to the production server, all the service operations work perfectly except the batch call, which fails with Object does not match target type. . I have not been able to find any cause for this. I can even run a single non-batch style GET operation against the [WebGet] service by copying the URL used in the batch and pasting it in a browser. I have not been able to find any information to help me solve this - any guidance would be most appreciated. Thanks, Mike M. Error message From Fiddler: HTTP/1.1 500 Internal Server Error Content-Type: application/xml DataServiceVersion: 1.0; An error occurred while processing this request. Object does not match target type. System.Reflection.TargetException at System.Reflection.RuntimeMethodInfo.CheckConsistency(Object target) at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) at System.Data.Services.RequestUriProcessor.CreateFirstSegment(IDataService service, String identifier, Boolean checkRights, String queryPortion, Boolean& crossReferencingUrl) at System.Data.Services.RequestUriProcessor.CreateSegments(String[] segments, IDataService service) at System.Data.Services.RequestUriProcessor.ProcessRequestUri(Uri absoluteRequestUri, IDataService service) at System.Data.Services.DataService`1.BatchDataService.HandleBatchContent(Stream responseStream)

  Read the article

• How to create a dynamic Linq Join extension method

  - by Royd Brayshay

  There was a library of dynamic Linq extensions methods released as a sample with VS2008. I'd like to extend it with a Join method. The code below fails with a parameter miss match exception at run time. Can anyone find the problem? public static IQueryable Join(this IQueryable outer, IEnumerable inner, string outerSelector, string innerSelector, string resultsSelector, params object[] values) { if (inner == null) throw new ArgumentNullException("inner"); if (outerSelector == null) throw new ArgumentNullException("outerSelector"); if (innerSelector == null) throw new ArgumentNullException("innerSelector"); if (resultsSelector == null) throw new ArgumentNullException("resultsSelctor"); LambdaExpression outerSelectorLambda = DynamicExpression.ParseLambda(outer.ElementType, null, outerSelector, values); LambdaExpression innerSelectorLambda = DynamicExpression.ParseLambda(inner.AsQueryable().ElementType, null, innerSelector, values); ParameterExpression[] parameters = new ParameterExpression[] { Expression.Parameter(outer.ElementType, "outer"), Expression.Parameter(inner.AsQueryable().ElementType, "inner") }; LambdaExpression resultsSelectorLambda = DynamicExpression.ParseLambda(parameters, null, resultsSelector, values); return outer.Provider.CreateQuery( Expression.Call( typeof(Queryable), "Join", new Type[] { outer.ElementType, inner.AsQueryable().ElementType, outerSelectorLambda.Body.Type, innerSelectorLambda.Body.Type, resultsSelectorLambda.Body.Type }, outer.Expression, inner.AsQueryable().Expression, Expression.Quote(outerSelectorLambda), Expression.Quote(innerSelectorLambda), Expression.Quote(resultsSelectorLambda))); } I've now fixed it myself, here's the answer. Please vote it up or add a better one.

  Read the article

• asp.net:Invalid temp directory in chart handler configuration [c:\TempImageFiles\].

  - by veda

  I am getting this error Invalid temp directory in chart handler configuration [c:\TempImageFiles\]. While running my code. Intially I was getting No http handler was found for request type ‘GET’ error which I solved it by referring no http handler But now I am getting the above error The details of the error are Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.IO.DirectoryNotFoundException: Invalid temp directory in chart handler configuration [c:\TempImageFiles\]. Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. The stackTrace of this error [DirectoryNotFoundException: Invalid temp directory in chart handler configuration [c:\TempImageFiles\].] System.Web.UI.DataVisualization.Charting.ChartHttpHandlerSettings.Inspect() +851 System.Web.UI.DataVisualization.Charting.ChartHttpHandlerSettings.ParseParams(String parameters) +1759 System.Web.UI.DataVisualization.Charting.ChartHttpHandlerSettings..ctor(String parameters) +619 System.Web.UI.DataVisualization.Charting.ChartHttpHandler.InitializeParameters() +237 System.Web.UI.DataVisualization.Charting.ChartHttpHandler.EnsureInitialized(Boolean hardCheck) +208 System.Web.UI.DataVisualization.Charting.ChartHttpHandler.EnsureInstalled() +33 System.Web.UI.DataVisualization.Charting.Chart.GetImageStorageMode() +57 System.Web.UI.DataVisualization.Charting.Chart.Render(HtmlTextWriter writer) +257 System.Web.UI.Control.RenderControlInternal(HtmlTextWriter writer, ControlAdapter adapter) +144 System.Web.UI.Control.RenderControl(HtmlTextWriter writer, ControlAdapter adapter) +583 System.Web.UI.Control.RenderControl(HtmlTextWriter writer) +91 System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +410 System.Web.UI.Control.RenderChildren(HtmlTextWriter writer) +118 System.Web.UI.HtmlControls.HtmlForm.RenderChildren(HtmlTextWriter writer) +489 System.Web.UI.HtmlControls.HtmlContainerControl.Render(HtmlTextWriter writer) +84 System.Web.UI.HtmlControls.HtmlForm.Render(HtmlTextWriter output) +713 System.Web.UI.Control.RenderControlInternal(HtmlTextWriter writer, ControlAdapter adapter) +144 System.Web.UI.Control.RenderControl(HtmlTextWriter writer, ControlAdapter adapter) +583 System.Web.UI.Control.RenderControl(HtmlTextWriter writer) +91 System.Web.UI.HtmlControls.HtmlForm.RenderControl(HtmlTextWriter writer) +91 System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +410 System.Web.UI.Control.RenderChildren(HtmlTextWriter writer) +118 System.Web.UI.Control.Render(HtmlTextWriter writer) +60 System.Web.UI.Page.Render(HtmlTextWriter writer) +66 System.Web.UI.Control.RenderControlInternal(HtmlTextWriter writer, ControlAdapter adapter) +144 System.Web.UI.Control.RenderControl(HtmlTextWriter writer, ControlAdapter adapter) +583 System.Web.UI.Control.RenderControl(HtmlTextWriter writer) +91 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +7761 Can anyone tell me how to solve this problem... Should i have to create a temporary directory manually or what should i do...

  Read the article

< Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >