Search Results

Search found 6433 results on 258 pages for 'trouble shooting'.

Page 103/258 | < Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >

  • sudo rejects password that is correct

    - by Ryan
    sudo (Which I have configured to ask for a password) is rejecting my password (as if I mis-typed it) I am absolutely not typing it incorrectly. I have changed the password temporarily to alphabetic characters only, and it looks fine in plaintext, in the same terminal. I have my username configured thus: myusername ALL=(ALL) ALL I am using my password, NOT the root password, which are distinct. Just to be sure, I've tried both (even though I know the root password is not what I should use) - neither work. I have added myself to the group 'wheel' additionally, and included the following line: %wheel ALL=(ALL) ALL I'm kind of at the end of my rope here. I don't know what would cause it to act as though it was accepting my password, but then reject it. I have no trouble logging in with the same password, either at terminal shells, or through the X11 login manager.

    Read the article

  • How do I run perfmon against a remote machine?

    - by WindyCityEagle
    For starters I'm trying to do this from a Windows 7 box to a Windows 7 box. I know the simple answer should be to enter \\computername where it says "Select Counters From Computer". Trouble is, every time I do that I get an error message that says "Unable to connect to machine" I know the machine is out there and accessible, because I can bring up windows explorer and enter \\computername\c$ in the explorer bar and then can browse their c drive. So the machine is out there. Are there special permissions for perfmon? Is here a service which needs to be running on the remote machine?

    Read the article

  • Is it possible to host a website with Apache HTTP through a ZyXEL EQ-660R modem and a Netgear WGT624v3 wireless router?

    - by Vortico
    Essentially, I have a spare desktop computer I'd like to turn into a web server, but my modem and wireless router are very difficult to work with. I installed Apache HTTP and successfully hosted a test page which can be accessed anywhere on the LAN. However, I'm having trouble setting up the server to be accessed from my external IP address. I was supplied with a ZyXEL EQ-660R DSL modem by my ISP (CenturyLink) and bought a Netgear WGT624v3 wireless router in which to connect my laptop and spare desktop. ZyXEL's website is no help, and I don't think much of the problem is with the Netgear router. I've played with many settings and have tried to forward port 80 from the modem, but I've had no luck. Could someone direct me toward a solution or recommendations for more promising hardware? Or should I admit defeat and explore other hobbies? :)

    Read the article

  • Why do I have inconsistent network issues with my laptop's wireless?

    - by Jason
    I'm having trouble with my laptop Internet connection. It's patchy at best and resets or freezes a lot. The signal strength is also random. I thought it might be a driver issue but now I don't know. Three other computers using the same wireless network run well. I've switched out wireless routers so I don't think it's the router. I thought it might be the laptop's internal wireless card but I just bought an external USB network card and I'm still having problems. Specs Lenovo T-60p Windows 7 Ultimate Edition Patches/drivers are up to date I only use one of the below at a time, disabling the other: Intel PRO/Wireless 3945ABG v. 13.3.0.137 (Internal wireless) Medialink Wireless-N USB 2.0 Adapter (USB wireless) Any ideas on what might be the problem?

    Read the article

  • "Access denied" to C:\Documents and Settings after removing malware?

    - by Rising Star
    My Windows 7 PC became infected with the so-called "Malware Protection designed to protect" trojan while I was at work the other day. I managed to kill the process so that the malware is no longer running. The removal instructions specify to delete the following file: c:\documents and settings\all users\application data\defender.exe However, when I click to c:\documents and settings, it says "Access denied". Prior to this malware infection, I've never had any trouble accessing "Documents and Settings" or "Application Data." I read that in Windows 7, c:\documents and settings is a psudonym for c:\users, but I still cannot find the file defender.exe. Suggestions?

    Read the article

  • What factors can affect performance of Http Server written in C-Sharp? [on hold]

    - by Yousaf
    I am having trouble in terms of handling huge databases. I have multiple clients like 100-300 (clients are basically servers with i.e windows sql). Each client may have 38 thousand rows/listing of data, each row has 10-12 fields. I cannot afford to have json files of each client and than handle them on main server, because of memory issue. What if i have http server written in c or c# installed on clients and they return 250 rows in each response to the main server. How the factors like speed, memory or other issues can effect us ? What exactly I am asking for ? In short words if a server writter in c-sharp sends 250 rows per request. What factors can effect the performance of server ? for example. Speed, processing, Operating system, Implementation of algorithm of server ? How these factors can really effect the performance on large scale?

    Read the article

  • Why is chrome slashing my HTTPS?

    - by John Isaacks
    In Chrome when I view my page the https in the URL has a red slash through it. When I click it, it says: Your connection to www.example.com is encrypted with 256-bit encryption. However, this page includes other resources which are not secure. ... I am not getting the mixed content warning in IE or FF. Is there a way to get Chrome to tell you exactly what/where is causing the issue? I am having trouble finding what is causing Chrome to throw a hissy fit. I searched my source for any http that does not contained https but am not seeing any. It would be nice if there is an easy way to pinpoint the issue.

    Read the article

  • Truecrypt on Linux (permission confusion)

    - by xcross
    I am pretty inexperienced with Linux... So please bare with me here. I keep running into permission problems when working with truecrypt on Linux. Currently, I run truecrypt as root to mount my encrypted devices and containers. This all works fine, but I have to interact with the mounted volumes in the terminal as root, and I can't seem to use many of my applications on the files... Either because they can't be run as root or I don't know how to use them from the terminal. This seems really inconvenient to me. How do people deal with this? Am I missing something, or is this just the way things have to be? I am on Fedora 17 (KDE spin) now but I have this trouble with any distro I try.

    Read the article

  • FTP Folder Permissions / IIS8

    - by raam030
    I am having trouble copying information from one folder on an FTP site to another folder. Accessing the FTP site from a windows explorer. I have set Full Control over the parent folder, and I double checked...I have full control over the two folders that is trying to copy information from and to. It actually lets you right click and copy. Then when you try to go to another folder and right-click and paste, the paste option is grayed out. I was able to do it before and no one has changed the IIS permissions. I believe it's a Windows issue. Is it possible that even though the permissions are set to give full control over that directory, that something else is interfering? I did double check the IIS permissions. I am not on a domain, using anonymous access, made sure the access control is set to read/write.

    Read the article

  • How to install a mmc certificate on Windows?

    - by Alex
    I am not familiar with Windows very much, and I have trouble installing a MMC certificate. I am following this description to use MMC to create a certificate, but I cannot complete the step labeled ' Install or view the certificates under:'. There is nothing unter 'ConsoleRoot' - 'Certificates (Local Computer)' - 'Personal', and when I try to find the certificate I cannot find it. There is another page with nice screenshots, which works until step 9 when I am about to choose the certificate file. I do not know where this file is been created, if at all. How can I create/install/import this certificate? I require this in order to use the powershell Enter-PSSession from a remote machine...

    Read the article

  • Firefox unable to load SSL Certificate Chain, while Chrome, IE do

    - by FryBurger
    I created a certificate for our IIS 6 by sending a request (created with openssl) to our organization's CA. I already had trouble to integrate the private key into that certificate, that has been solved, see SO question IIS 6.0 now uses the certificate (with TSL v1 and SSL v3), that is the 4th in cert hierarchy. Now, if I access the intranet site, chrome accepts the certificate, so does IE, but Firefox complains about an insecure connection and wants me to add an exceptional rule. If I look into the certificate, how FF presents it to me, I cannot see any of the three issuers. How can this be? If I connect via openssl s_client -showcerts -connect... I only see my own certificate too, which is said to be not verified. I am quite confused now. Where's the mistake and how can I make FF accept certificate without forcing our users to add that exceptionrule? Maybe do I have to add all the three issuer certificates into cert store of the win2003 server that hosts IIS 6.0 ??

    Read the article

  • How can I check that I'm not frying the chipset on my 945 gclf?

    - by Journeyman Geek
    I'm running an old 945 gclf as a home server. Its an odd little system which has a passively cooled single core atom 230 processor, and a small heatsink/fan combo over the chipset. lm-sensors/sensors detects one temperature sensor which I guess is the processor. coretemp-isa-0000 Adapter: ISA adapter Core 0: +38.0°C (crit = +100.0°C) The fan on it is making rather horrible noises and I am considering unplugging it or using a speed reducer. There's also a risk it may fail anyway. Is there any way I can monitor the temperatures of the chipset or be warned of any issues with it? Is there anything specific I can watch out for that would indicate trouble?

    Read the article

  • Mystery process crashing machine by using all of the RAM - how to identify?

    - by wd40
    I have a Linux machine which runs ~10 in house written processes. Every other day(!) the machine completely runs out of RAM, goes into swap and becomes unresponsive. This happens quickly over a period of a couple of seconds, so it's not feasible to sit watching the machine until it dies. It's a sudden leak, not a gradual one, so top(1) doesn't give any indications something bad may about to happen. What is the best way of identifying which process(es) are causing the trouble?

    Read the article

  • Issues with new graphics card and drivers

    - by Ortund
    With my onboard graphics card (Intel HD 4000) I was able to use 1680x1050 screen resolution. Using the same screen and an Asus ENGTS250 graphics card with 296.10 drivers installed, I'm not able to use that resolution anymore. Also, I've been having other trouble with driver installations. Using 340.52 or 337.88, I can't boot into Windows 7. I see the Windows Welcome screen and then the screen goes black, loses signal and the computer locks up. I think the drivers issues and the resolution problems go hand-in-hand. I have a feeling I could use a newer driver than 296.10 which would give me access to use the 1680x1050 resolution I want to use, but I'm terrified that if I update or install another driver, that the computer will lock up again. Can anyone recommend a [better] driver for me to use?

    Read the article

  • Unmasking fake IP address

    - by Omousso
    I need to unmask I masked IP..that has hacked my account & a family members account(s)... Can anyone help me...I have know no Idea where to start and know nothing about even where to begin. PLEASE someone reply, this is not a random hacking but someone trying to cause my family trouble...at least my instinct says so. My family member and myself both believe we know who it is.. They have gotten into several of my accounts and I've been acting is I don't know...tracking ip's..but I feel like they are masked! Also, my family member changed there email/password numerous time and they still got in....how?? Any & all help is appreciated!!

    Read the article

  • Can't get PHP Errors in IIS7.5

    - by Erling Thorkildsen
    I've tried the previously answered questions regarding this to no avail. Just installed PHP5 and IIS on my Windows 7 machine and I'm having trouble getting PHP Errors displayed instead of 500 Errors. In PHP; error_reporting = E_ALL display_errors = On In IIS I have htmlErrors set to Detailed which shows a detailed IIS 500 Error page. If set to Custom it shows a basic 500 Error page. If I set it to PassThrough I get a blank page (view-source reveals no code). My PHP log file is showing a Fatal PHP Runtime Error.

    Read the article

  • how to make Excel/Access data have more than one quantity in a table?

    - by Xrave
    Sorry for the confusing question, I'm not sure how to word it right: here's a mock sample of my data Name: Cheeseburger Date: 1/20/2011 Stock: 30 Price: 200 Name: Hamburger Date: 1/20/2011 Stock: 12 Price: 180 Name: Cheeseburger Date: 1/21/2011 Stock: 31 Price: 210 ... I will have to make a table in excel or access capable of looking up the stock and price trends of a particular brand through time. Trouble is, I have two independent variables (Stock, Price) and two known dependent variables (Name, Date). So, I cannot use a simple table where the x axis is the name, y axis is the time, and the cells represent a quantity - each cell have to represent two quantities (Stock, Price) Does anyone know how to do that? Thanks.

    Read the article

  • Writing directory: permission denied even though dir seems to be chmodded correctly

    - by Aron Rotteveel
    I am having some trouble creating files in directory on my Ubuntu machine: I added myself to the www-data group in order for me to easily edit stuff in my /var/www dir on my development machine. stat /var/www shows the following: File: ‘/var/www’ Size: 4096 Blocks: 8 IO Block: 4096 map Device: 808h/2056d Inode: 142853 Links: 3 Access: (0775/drwxrwxr-x) Uid: ( 33/www-data) Gid: ( 33/www-data) Access: 2010-12-30 16:03:18.563998000 +0100 Modify: 2010-12-30 16:02:52.663998000 +0100 Change: 2010-12-30 16:03:13.111998001 +0100 Still, it is impossible for me to create anything below /var/www (the only way for it to work is to chmod it to 777. What am I missing?

    Read the article

  • Is there a proper way to clear logs?

    - by John H.
    I was wondering if there was a proper way to clear logs in general? I'm new to Ubuntu and I'm trying to set up Postfix. The log in question is /var/log/mail.log. I was wondering if there was a correct way to clear it, rather than me going in it and deleting all the lines and saving it. I find that sometimes errors don't get written to it immediately after I clear the log and save it. Side note: I'm having trouble setting up Postfix and am trying to make it easier for me to read the logs hoping it can help me out, instead of having to scroll all the way down.

    Read the article

  • Looking for concise set of instructions for upgrading Vmware 5.1 to 5.5

    - by Michael Martinez
    I'm trying to find a set of instructions for upgrading Vmware (ESXi and Vsphere) from 5.1 to 5.5, but all I'm finding online is a bunch of separate, incomplete knowledgebase articles which is making it difficult to get an overview of what's involved. What I'd like is a single, concise document that lists the steps involved. It could be a free online article, someone's blog, a small booklet, someone here who takes the trouble to write it out. Does such a thing exist? If so, can you provide the reference or even provide the text here. I'm running a very small, simple environment consisting of two ESXi hosts and Vsphere Standard edition. Thanks.

    Read the article

  • Trying to make mod_rewrite to work on Windows

    - by Psyche
    Hello guys, I'm having some trouble confinguring Apache mod_rewrite on Windows. I'm using latest version of XAMPP on Windows Vista. Here's my httpd.conf file: LoadModule rewrite_module modules/mod_rewrite.so <Directory /> Options FollowSymLinks AllowOverride All </Directory> <Directory "D:/Server"> Options Indexes FollowSymLinks Includes ExecCGI AllowOverride All Order allow,deny Allow from all </Directory> My .htacces file looks like this: Options +FollowSymLinks RewriteEngine On RewriteBase /wcc/ RewriteRule ^red-wines/$ /red-wines.php [L] When I try to access http://localhost/wcc/red-wines/ I get a 404 not found error. Any ideea why? Thanks.

    Read the article

  • Converted VmWare Image does not boot in Virtual Box

    - by vBox Question
    I have a .vddx virtual image which boots in VmWare, but I'm having trouble getting it to work with Sun Virtual Box. In Sun Virtual Box, I created a new Virtual Machine and pointed it at the vddx file from VmWare. When I try to boot the virtual machine, Sun Virtual Box says that the volume is not bootable. VmWare is able to boot from this virtual machine. Does anyone have any suggestions about what might be causing the problem? Is there a conversion utility that I need to run? Any debugging options that I could turn on?

    Read the article

  • Prevent history deletion on Google Chrome

    - by ProstheticHead
    One of the guys I'm in charge of hasn't been pulling his weight. His productivity and quality of workmanship are way down and his computer's been getting malware infections lately. You can see where this is going. I'm generally an easy going guy (and I don't want any trouble but I still have to address this issue). Is there a way to disable browser history deletion on Chrome? I'm hoping this alone will be enough of a deterrent to put things right.

    Read the article

  • How can we recover/restore lost/overwritten data in our MSSQL 2008 table?

    - by TeTe
    I am in serious trouble and I am seeking professional advices here. We are using MSSQL server 2008. We removed primary key, replaced exiting data with new data resulted losing our critical business data in its child tables on MSSQL Server. It was completely human mistake and we didn't have disk failure. 1) The last backup file was a month ago which means it is useless. 2) We created Maintenance Plans to backup our database at 12AM everyday but those files are nohwere to be found 3) A friend of mine said we can recover from Transaction Logs. When I go to TaskRestore Transaction log is dimmed/disabled. 4) I checked ManagementMaintenance Plans. I can't find any restored point there. It seems that our maintenance plan hasn't been working. Is there any third party tool to recover lost/overwritten data from MSSQL table? Thanks a lot.

    Read the article

  • Can I capture input text with the P?roblem Steps Recorder on Windows 7?

    - by WindyCityEagle
    I have recently been introduced to the Problem Steps Recorder on Windows 7. It's great. Trouble is, it does not recorder keyboard input. When I look at the output of a recording all I see it User keyboard input in "Untitled - Notepad" [... Backspace Backspace Backspace Backspace Backspace ...] So I know the user typed SOMETHING and then deleted five characters. Is there a way to get the PSR to record what was inputted? Or is that a security issue? This isn't a big deal for notepad, but for custom apps it would be nice to know exactly what a user typed into a text box.

    Read the article

< Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >