Search Results

Search found 7126 results on 286 pages for 'wireless router'.

Page 103/286 | < Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >

• What is the most reliable WiFi card?

  - by Kim Prince

  Which WiFi card is most reliable with Ubuntu, in particular V12.04? I have a ASUS PCE-N15 card which is dropping out intermittently. It has the RTL8188CE chipset, and I see that plenty of others have had a problem with this same chipset. I have tried building the custom drivers and a few other fixes, but still not reliable. So, I need to race out another card ASAP, but which card to buy? (I don't just want to select from the Ubuntu components list, since it is not infallible. For example, it says the RTL8188CE chips set works). Thanks!

  Read the article

• Wifi speed with driver rtl8187 drops

  - by Peter

  I am using lucid lynx with this USB adapter and drivers rtl8187. When I start a download, it starts at 1500kpbs (if i use "iwconfig wlan0 rate [more than 11MB]" it starts at a lower speed), it transfers a few kbs but then the speed starts to drop constantly and nothing is being transferred. I've also tried the driver r8187, but I have the same speed problem only that with this driver the download starts at only 10kbps, and drops from there. What can I try to identify the cause and fix this problem?

  Read the article

• How to prevent ubuntu from connecting to wifi hotspots automatically

  - by calvin tiger

  Note: this question is distinct from "How to disable automatically connecting to WiFi?", as I do not wish to disable automatic WiFi connection in general. Problem: The Ubuntu WiFi module connects automatically in priority with WiFi networks without a password, even if there is a already known password-protected WiFi network nearby. Worse, most of the times these "unprotected" networks are in fact hotspots that require authentification from the browser. Example: I am at home, and most of the times my Ubuntu laptop will connect by itself to a nearby hotspot instead of choosing my local ADSL box (password-protected, with a password that is already known by the computer). I then have to select my own WiFi network manually. Is there a way to disable automatic connection to /all/ hotspots ?

  Read the article

• I need acpi=off to boot, but this seems to disable wifi

  - by TheExp3rt

  To boot my computer, I have to use acpi=off in kernel options. Doing this apparently causes my wifi adapter to be switched off and prevents my mouse and USB keyboard to not work. If I change acpi=off to nomodeset, it fixes these problems. But then it sets my computer at a lower resolution. I am currently running Kubuntu 13.10, although none of the updates, starting from 12.04, changed the need for acpi=off. I assume I need acpi=off in because I have an oldish computer with an intel motherboard How can I boot without acpi=off? Output of uname -a: 3.11.0-13-generic #20-Ubuntu SMP Wed Oct 23 07:38:26 UTC x86_64 x86_64 x86_64 GNU/Linux

  Read the article

• ACER ASPIRE ONE, WIFI Atheros Communications Inc. AR9462 problem with 12.10

  - by antoine

  I have an ACER ASPIRE ONE AO756-Series, equipped with A wifi controller Atheros Communications Inc. AR9462 Everything worked fine on 12.04, but when I upgraded to 12.10 I experimented some issues : * wifi does work ! * still, the wifi icon/menu does not react normally : 1) it is always grey, hence not indicating if connected or not, 2) It does not react to me clicking on it (disconnect, change the network, desactive wifi, etc) So it's not a critical issue because I can change the active wifi connection through control pannel, but it is very annoying. Do you know of an solution around this issue ? thanks a lot antoine

  Read the article

• Why does my WIFI connection drop every 5-20 minutes?

  - by Benett Freeman

  There are other questions on this but none have been taken very far in their analysis. I get disconnects very often - sometimes every 20 mins or so, but sometimes even every few minutes. The way I have been getting around it is to disconnect from the Wifi connection and reconnect - and then it works fine again until the next disconnect. I am running 11.04 on an ASUS A52F. Can anyone help me please?

  Read the article

• Wifi function key not working on HP laptop

  - by lopsided98

  I have an HP Pavilion g7-1260 with Ubuntu 13.10 on it. I would like to be able to use the wifi toggle key on the keyboard to enable and disable wifi. My wifi works fine and the light on the key turns on when I enable wifi through the Ubuntu networking menu. The problem is that pressing the key does not do anything. It should be activated when I press fn + f12. I tried using xev to see if an event was generated but there wasn't one. I also tried the same thing with apci_listen but it didn't output anything. Does anyone know how to get the key to work?

  Read the article

• Slow wifi with D-link DWA-160 A2

  - by Tommy Brunn

  I recently bought a USB wifi adapter for my new desktop computer. It's a D-link DWA-160 A2. From the start it didn't want to work at all, but after unplugging and then plugging it back in, it seems to work. However, my browsing is painfully slow. NetworkManager reports the connection to be at around 78-85% signal strength, which seems perfectly acceptable. Is there anything I can do to make it faster? I'm dual booting with Windows 7, where it seems to work fine, so I'm guessing that the problem occurs because of crappy drivers.

  Read the article

• building kernel headers (v3.4) breaks wifi (in Ubuntu 12.04.1 LTS)

  - by iphonedev7

  I have dual-booted by Samsung Series 5 Chromebook into Ubuntu using Jay Lee's script/instructions, and then installed the ~500 updates that appear thereafter. Now, I am trying to build my kernel headers in an attempt to enable virtualization so that I can run VirtualBox (I have a VM image on a flashdrive). I followed the instructions here: https://groups.google.com/forum/?fromgroups=#!topic/chromebook-central/PPQFpC7mYzk mainly doing as olofj suggests in his answer, while also making sure to abide by additions/edits made by panZ and algp. However, now that I have done so, my wifi has stopped working, and when I click on the network icon in the top bar, in place of wifi networks there is a grayed-out message that says "no network devices available". I have an Atheros AR9300 Ethernet card (I think thats what you call it). Any help is much needed and appreciated. Any further details necessary to answer the question will be provided as necessary. Thanks!

  Read the article

• Missing driver ASUS PCE-N53 11n N600 PCI-E Adapter

  - by oyse

  I have problems with getting an Asus PCE-N53 11n N600 PCI-E Adapter card to work on my desktop computer. As far as I can tell no drivers are installed for the card. I know I can manually download the drivers directly from Asus, but I would rather not go that route. If there are anyone that knows about any packages or other things I can do to make this work would be much appreciated. Some systems details: $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise $ sudo lshw -C network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 06 serial: d4:3d:7e:03:b9:1d size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168e-3_0.0.4 03/27/12 ip=192.168.0.173 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:43 ioport:d000(size=256) memory:f2104000-f2104fff memory:f2100000-f2103fff *-network UNCLAIMED description: Network controller product: Ralink corp. vendor: Ralink corp. physical id: 0 bus info: pci@0000:04:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f7100000-f710ffff $ lsmod Module Size Used by nvidia 12319264 51 vesafb 13844 1 snd_hda_codec_hdmi 32474 1 joydev 17693 0 bnep 18281 2 rfcomm 47604 0 bluetooth 180104 10 bnep,rfcomm snd_hda_codec_realtek 224173 1 snd_seq_midi 13324 0 ppdev 17113 0 snd_rawmidi 30748 1 snd_seq_midi usbhid 47199 0 hid 99559 1 usbhid nouveau 774641 0 parport_pc 32866 1 snd_hda_intel 33773 5 ttm 76949 1 nouveau snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel drm_kms_helper 46978 1 nouveau drm 242038 3 nouveau,ttm,drm_kms_helper snd_seq_midi_event 14899 1 snd_seq_midi snd_hwdep 13668 1 snd_hda_codec snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event i2c_algo_bit 13423 1 nouveau mxm_wmi 12979 1 nouveau wmi 19256 1 mxm_wmi mac_hid 13253 0 snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec psmouse 97362 0 video 19596 1 nouveau snd_timer 29990 2 snd_seq,snd_pcm snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 20 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_rawmidi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq,snd_pcm,snd_timer,snd_seq_device serio_raw 13211 0 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm mei 41616 0 lp 17799 0 parport 46562 3 ppdev,parport_pc,lp r8169 62099 0

  Read the article

• Problems connecting to eduroam wifi - ubuntu touch

  - by Fiona Cox

  I am trying to connect to our university's eduroam wi-fi network with my Nexus 4 running Ubuntu touch (utopic latest build), but can't get past the first stage. I wonder if anyone can help please? I am following these instructions (which worked for my iPhone): http://www.st-andrews.ac.uk/itsupport/mobile/eduroam/ But when I go to the bandit.st-andrews.ac.uk/connect page then follow the link to 'eduroam setup' I get the error message: Authorization Required This server could not verify that you are authorised to access the document requested. Either you supplied the wrong credentials (e.g., bad password), or your browser doesn't understand how to supply the credentials required. Apache/2.2.16 (Debian) Server at bandit.st-andrews.ac.uk Port 443 (Clearly it's the latter option (browser) as I haven't been asked for my credentials yet.) Is there a way round this, or am I just not going to be able to connect until further down the Ubuntu touch development road... Thanks!

  Read the article

• Ubuntu on Thinkpad Edge 11/13/14/15

  - by lasseespeholt

  I think a community wiki on problems (and solutions) when installing Ubuntu (10.10) on a Thinkpad Edge 11 would be nice (because I just got one ;)). I'll contribute with my own problems and solutions, and hope others will join too. Thinkwiki entry for the Edge 11 Known problems: No wifi-driver, solution: answer #1, answer #2 Fan is loud, even though it's on auto. No solution. Thinkfan is a possible solution, but correction values for sensors should be supplied (mapping sensors to specific areas). Also, one sensor is between -100C and +100C - maybe some kind of deactivation would help. FN keys stop working: see below. No sound on headphones: see below.

  Read the article

• Why does wifi hotspot doesn't work correctly?

  - by Habi

  I have created the wifi hotspot. In windows, it used to display wifi signal on my nokia C3 but after creating wifi hotspot from ubuntu, I am facing certain problem. Nokia C3 doesn't even gets wifi signal. But wifi signal appears in my samsung mobile GTS3-850 and I can access wifi if I put wifi security option to "none" On the other hand, if I create password then Nomatters, if I type right password or not, it doesn't connect to that wifi. Note : I use Wimax to access internet.

  Read the article

• Connection manager detects network but won't connect

  - by Carson Chittom

  I've just installed 12.04 on my home desktop. Because of where it's located, in order not to have my children tripping over cat5 cable, I've got a cheap 802.11n USB device plugged in, which uses a Realtek 8192CU chip. The house wifi is protected with WPA2. Ubuntu's Network Manager detects the network, but connecting to it just times out and asks for the password again. I'm sure I'm using the correct password. No other computers on the house network are having any difficulty. This device previously worked correctly with both Windows 7 and OpenBSD in the same machine. The linux-firmware package is installed (from the disc) at version 1.79, and /lib/firmware/rtlwifi/rtl8192cufw.bin is present. dmesg|grep rtl only shows the "loading firmware" message. I've tried Google, but I apparently can't find the right set of words to plug in, because I haven't found anything related (lots of "doesn't work at all," but nothing matching my circumstances). Any help would be greatly appreciated.

  Read the article

• Wlan connection got lost permanent

  - by chris

  I have a desktop with a fritz usb wlan n tick and tried ubuntu 12.04. installlation is fine and wlan is working, however connection drops permanent. reconnecting manually fixes it but after a few minutes it drops again. it's connected to a vodafone 802 box with wlan n fix set. it seems that it works when i switch off n mode...but i need to test. can someone confirm or is there another solution? i have another machine with 12.04 (hp 625 laptop) running where connection is stable. any help much appreciated. thank chris

  Read the article

• ACER Aspire V5-171 compatibility

  - by JamerTheProgrammer

  Im thinking about buying a V5-171 with an i3 in it. Im worried about secure boot though. I heard some people cant turn it off and it wont work... Im not shy to open it up and replace the hard drive with Ubuntu preinstalled. Im also worried about the wifi working. I have heard its been dropping out for people quite a bit along with also the trackpad not working. I dont mind replacing the wifi stick (if its even possible?) inside. Is the GPU (HD4000 i think) supported in ubuntu with full video accel? Thanks!

  Read the article

• USB Wifi that works with 12.04

  - by Colin Matheson

  I have done several hours of searching and I am still looking for a few USB wifi adaptors that run in 12.04 with no additional driver installations or other fiddling. I am looking to plug in the adaptor and have the laptop recognize and start connecting. We have 30 older laptops with flaky internal wifi cards so I thought that if I could find a $10-$20 USB adaptor that work reliably in 12.04 I could plug it in and solve all my connectivity problems for a few hundred dollars.

  Read the article

• Ubuntu 12.04 share the internet over WiFi from wvdial?

  - by Sour Lemon

  I have just installed Ubuntu 12.04 on a separate partition on my hard drive so I can dual boot to either Windows 7 or Ubuntu. I am living in Japan and so I'm using a mobile broadband USB device called "Softbank C02LC". By default it seems that this device isn't recognised so I did the following: Terminal: sudo su nano /usr/bin/usbModemScript Nano: #!/bin/bash echo 1c9e 9900 > /sys/bus/usb-serial/drivers/option1/new_id Terminal: chmod +x /usr/bin/usbModemScript nano /etc/udev/rules.d/option.rules Nano: ATTRS{idVendor}=="1c9e", ATTRS{idProduct}=="9900", RUN+="/usr/bin/usbModemScript" ATTRS{idVendor}=="1c9e", ATTRS{idProduct}=="9900", RUN+="/sbin/modprobe option" which made the device visible from the network manager etc. However even though I set up my details correctly when I created a new connection (Correct username, APN etc) as soon as I try to connect it almost immediately disconnects. Because of this I then followed the instructions at this site: http://debugitos.main.jp/index.php?Ubuntu%2F%A5%E2%A5%D0%A5%A4%A5%EB%A5%A4%A5%F3%A5%BF%A1%BC%A5%CD%A5%C3%A5%C8 And I ended up using the c02lc_connect script at the bottom of the page to connect to the internet. The file contains the following bash script: #!/bin/sh usbinterfece=/dev/ttyUSB2 VID=1c9e PID=9900 WRONG_PID=f000 LSUSB=/usr/sbin/lsusb GREP=/bin/grep MODPROBE=/sbin/modprobe SWITCH=/usr/sbin/usb_modeswitch SWITCH_D=/etc/usb_modeswitch.d WVDIAL=/usr/bin/wvdial SLEEP=/bin/sleep SUDO=/usr/bin/sudo WHICH=/usr/bin/which switch_config="$SWITCH_D/$VID:$WRONG_PID" if ! [ -x $WVDIAL -a -x $SWITCH ]; then echo "Install wvdial and usb_modeswitch." exit 0 fi check_usb() { local vid="$1" local pid="$2" ($LSUSB | $GREP "$vid:$pid") } if ! (check_usb "$VID" "$PID"); then echo "Cannot find modem device..." if (check_usb "$VID" "$WRONG_PID") && ( [ -f "$switch_config" ] ); then echo "The device is attached but its mode is wrong." echo "Try usb_modeswitch..." $SUDO $SWITCH -c "$switch_config" $SLEEP 1 if (check_usb "$VID" "$PID"); then echo "Successfully switched the mode." else echo "Failed to switch the mode..." exit 1 fi else exit 1 fi fi if [ ! -c "$usbinterface" ]; then $SUDO $MODPROBE usbserial vendor=0x$VID product=0x$PID $SLEEP 2 fi $SUDO $WVDIAL which works completely fine - no problems what-so-ever. But we also have 1 more laptop here which I need to share the internet connection with. In Windows 7 I do this with the Connectify program, and in Ubuntu I have seen that you can do things like set up hotspots etc. But because I am using WvDial I am not sure how I would share the internet. I am only beginning to use Ubuntu but unfortunately until I can figure out how to share the internet over WiFi when connected via WvDial I have to stick with Windows. If you have any ideas on how to do this it would be much appreciated!

  Read the article

• iwconfig usage for WEP access point?

  - by johan elmander

  I would like to use my wifi doggle in my pc (ubuntu 12.04). I am able to connect to my access point through the GUI. I would like to do the same in the terminal. My access point uses WEP. So I typed the following commands iwconfig wlan0 mode managed key 6d6f6e6579 iwconfig wlan0 essid "AccessPoint" dhclient wlan0 after typing dhclient wlan0 it waits like 1-2 min then outputs nothing and cannot connect to the Access Point. iwconfig output: wlan0 IEEE 802.11bgn ESSID:"AccessPoint" Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm Retry long timit:7 RTS thr=2347 B Fragment thr:off Encryption key:6D6F-6E65-79 Power Management:off I would appreciate any suggestion

  Read the article

• Not able to connect to local network

  - by Roopesh

  I have installed Kubuntu , I am able to connect to Internet and able to access external sites, but in my local network i have bugzila installed that i am not able to access, even i am not able to ping the gateway also 192.168.1.1 . below is the result of ifconfig command Please help . Thanks ~# ifconfig eth0 Link encap:Ethernet HWaddr b8:70:f4:da:f9:a8 inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:42 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:884 errors:0 dropped:0 overruns:0 frame:0 TX packets:884 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:81131 (81.1 KB) TX bytes:81131 (81.1 KB) wlan0 Link encap:Ethernet HWaddr 68:5d:43:2e:1c:79 inet addr:192.168.1.26 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::6a5d:43ff:fe2e:1c79/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2446 errors:0 dropped:0 overruns:0 frame:0 TX packets:2324 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1909441 (1.9 MB) TX bytes:393292 (393.2 KB)

  Read the article

• Configuration of the network manager via DBus: how to set the ad hoc mode

  - by Andrea

  I have an hard nut to crack: a nice bottle of italian Chianti wine to the solver! :) To automatically configure Wifi, I first have to kill the network manager and than activate the wifi via the commandline: I do this all automatically in my application and works great. However... it is not the right way to do this. As the user has no network gui anymore to configure some other network access. A much better and transparent way would be to configure wifi directly via network manager over the DBus interface. I was able to configure it, but I wasn't able to set it to ad hoc mode... Searching the web for a while: a lot about configuration in general but nothing related to ad hoc mode. I think the only way to do figure that out is to look into the source code of the network manager...maybe someone already did it and he can answer.

  Read the article

• Ubuntu and Surface Pro, wifi issues not fixed?

  - by Confused or too stupid

  Just a quick question, from the numerous other threads I found, is the wifi still a no go straight out of installing Ubuntu? I tried this Dual boot Surface Pro with Ubuntu? with 13.04, the wifi is sporadic in working. From that and other threads I gathered that 13.10 would include the fix, so I tossed that onto the Surface as well, with the same results. Is there anything I am missing? Is there any other distro that has better luck with the Marvell chip?

  Read the article

• Internet connection randomly drops out

  - by Dr_Bunsen

  Since a week or 2, I have this random network failures. No error pops up, the system says it's still connected to the internet(wifi and wired). The problem is, I can't connect to anything, even a ping google.com gives no feedback. And after many network-manager resets it will work again, for just a minute, and drop out again. I noticed that the /etc/resolv.conf contains this line: nameserver 127.0.0.1 I left out the "Do not edit" stuff, and after it worked for a second, this line is added: search lan When I change the nameserver to 8.8.8.8, I am still able to connect to anywhere. Does anyone got a clue what is happening here? I will provide any information asked. Thanks in advance p.s. I run Ubuntu 13.04 since lastnight(24-06-2013)

  Read the article

• My WiFi gets deauthenticated every few minutes or seconds (Reason: 7)

  - by dan

  My Wifi on my new Thinkpad W520 running Natty keeps dropping out and coming back on. Output from dmesg below. Any advice? [30493.687552] wlan0: authenticate with e0:91:f5:ef:7b:b2 (try 1) [30493.689127] wlan0: authenticated [30493.689144] wlan0: associate with e0:91:f5:ef:7b:b2 (try 1) [30493.693592] wlan0: RX AssocResp from e0:91:f5:ef:7b:b2 (capab=0x411 status=0 aid=4) [30493.693595] wlan0: associated [31631.172868] wlan0: deauthenticated from e0:91:f5:ef:7b:b2 (Reason: 7) [31631.211847] cfg80211: All devices are disconnected, going to restore regulatory settings [31631.211868] cfg80211: Restoring regulatory settings [31631.211873] cfg80211: Calling CRDA to update world regulatory domain [31631.215037] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [31631.215042] cfg80211: World regulatory domain updated: [31631.215044] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [31631.215046] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [31631.215049] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [31631.215051] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [31631.215053] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [31631.215055] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [31632.289638] wlan0: authenticate with e0:91:f5:ef:7b:b2 (try 1) [31632.291262] wlan0: authenticated [31632.291276] wlan0: associate with e0:91:f5:ef:7b:b2 (try 1) [31632.295119] wlan0: RX AssocResp from e0:91:f5:ef:7b:b2 (capab=0x411 status=0 aid=4) [31632.295123] wlan0: associated [31886.234836] wlan0: deauthenticated from e0:91:f5:ef:7b:b2 (Reason: 7) [31886.306735] cfg80211: All devices are disconnected, going to restore regulatory settings [31886.306740] cfg80211: Restoring regulatory settings [31886.306744] cfg80211: Calling CRDA to update world regulatory domain

  Read the article

• How to completely remove wicd from 12.04?

  - by danijelc

  I had issues with WiFi so I removed Network Manager. I booted Windows OS (dual booting Windows 7 and 12.04) to download wicd 1.7.2.4. Extracted it and installed. However, wcid worked properly with Wired Connection but could not connect to WiFi. So, I re-installed Network Manager which works properly now, and wicd connects to WiFi too. As soon as I disconnect from Network Manager, wicd connects only to wired. At this point, I wanted to remove wicd but apt-get returns no wicd installed, can't see it in Synaptic or Software Center, but only in Applications list under Dash home. Of course wcid icon shows connections, and resulting connected, so my system shows both applets for wicd and network manager in the top panel. When running dpkg commands, wicd is not listed as installed package. Any suggestion how to remove wicd? Consider that I started with Ubuntu just few months ago so my knowledge base is limited.

  Read the article

< Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >