Search Results

Search found 6401 results on 257 pages for 'extends relationship'.

Page 104/257 | < Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >

  • PASS: Bylaw Changes

    - by Bill Graziano
    While you’re reading this, a post should be going up on the PASS blog on the plans to change our bylaws.  You should be able to find our old bylaws, our proposed bylaws and a red-lined version of the changes.  We plan to listen to feedback until March 31st.  At that point we’ll decide whether to vote on these changes or take other action. The executive summary is that we’re adding a restriction to prevent more than two people from the same company on the Board and eliminating the Board’s Officer Appointment Committee to have Officers directly elected by the Board.  This second change better matches how officer elections have been conducted in the past. The Gritty Details Our scope was to change bylaws to match how PASS actually works and tackle a limited set of issues.  Changing the bylaws is hard.  We’ve been working on these changes since the March board meeting last year.  At that meeting we met and talked through the issues we wanted to address.  In years past the Board has tried to come up with language and then we’ve discussed and negotiated to get to the result.  In March, we gave HQ guidance on what we wanted and asked them to come up with a starting point.  Hannes worked on building us an initial set of changes that we could work our way through.  Discussing changes like this over email is difficult wasn’t very productive.  We do a much better job on this at the in-person Board meetings.  Unfortunately there are only 2 or 3 of those a year. In August we met in Nashville and spent time discussing the changes.  That was also the day after we released the slate for the 2010 election. The discussion around that colored what we talked about in terms of these changes.  We talked very briefly at the Summit and again reviewed and revised the changes at the Board meeting in January.  This is the result of those changes and discussions. We made numerous small changes to clean up language and make wording more clear.  We also made two big changes. Director Employment Restrictions The first is that only two people from the same company can serve on the Board at the same time.  The actual language in section VI.3 reads: A maximum of two (2) Directors who are employed by, or who are joint owners or partners in, the same for-profit venture, company, organization, or other legal entity, may concurrently serve on the PASS Board of Directors at any time. The definition of “employed” is at the sole discretion of the Board. And what a mess this turns out to be in practice.  Our membership is a hodgepodge of interlocking relationships.  Let’s say three Board members get together and start a blog service for SQL Server bloggers.  It’s technically for-profit.  Let’s assume it makes $8 in the first year.  Does that trigger this clause?  (Technically yes.)  We had a horrible time trying to write language that covered everything.  All the sample bylaws that we found were just as vague as this. That led to the third clause in this section.  The first sentence reads: The Board of Directors reserves the right, strictly on a case-by-case basis, to overrule the requirements of Section VI.3 by majority decision for any single Director’s conflict of employment. We needed some way to handle the trivial issues and exercise some judgment.  It seems like a public vote is the best way.  This discloses the relationship and gets each Board member on record on the issue.   In practice I think this clause will rarely be used.  I think this entire section will only be invoked for actual employment issues and not for small side projects.  In either case we have the mechanisms in place to handle it in a public, transparent way. That’s the first and third clauses.  The second clause says that if your situation changes and you fall afoul of this restriction you need to notify the Board.  The clause further states that if this new job means a Board members violates the “two-per-company” rule the Board may request their resignation.  The Board can also  allow the person to continue serving with a majority vote.  I think this will also take some judgment.  Consider a person switching jobs that leads to three people from the same company.  I’m very likely to ask for someone to resign if all three are two weeks into a two year term.  I’m unlikely to ask anyone to resign if one is two weeks away from ending their term.  In either case, the decision will be a public vote that we can be held accountable for. One concern that was raised was whether this would affect someone choosing to accept a job.  I think that’s a choice for them to make.  PASS is clearly stating its intent that only two directors from any one organization should serve at any time.  Once these bylaws are approved, this policy should not come as a surprise to any potential or current Board members considering a job change.  This clause isn’t perfect.  The biggest hole is business relationships that aren’t defined above.  Let’s say that two employees from company “X” serve on the Board.  What happens if I accept a full-time consulting contract with that company?  Let’s assume I’m working directly for one of the two existing Board members.  That doesn’t violate section VI.3.  But I think it’s clearly the kind of relationship we’d like to prevent.  Unfortunately that was even harder to write than what we have now.  I fully expect that in the next revision of the bylaws we’ll address this.  It just didn’t make it into this one. Officer Elections The officer election process received a slightly different rewrite.  Our goal was to codify in the bylaws the actual process we used to elect the officers.  The officers are the President, Executive Vice-President (EVP) and Vice-President of Marketing.  The Immediate Past President (IPP) is also an officer but isn’t elected.  The IPP serves in that role for two years after completing their term as President.  We do that for continuity’s sake.  Some organizations have a President-elect that serves for one or two years.  The group that founded PASS chose to have an IPP. When I started on the Board, the Nominating Committee (NomCom) selected the slate for the at-large directors and the slate for the officers.  There was always one candidate for each officer position.  It wasn’t really an election so much as the NomCom decided who the next person would be for each officer position.  Behind the scenes the Board worked to select the best people for the role. In June 2009 that process was changed to bring it line with what actually happens.  An Officer Appointment Committee was created that was a subset of the Board.  That committee would take time to interview the candidates and present a slate to the Board for approval.  The majority vote of the Board would determine the officers for the next two years.  In practice the Board itself interviewed the candidates and conducted the elections.  That means it was time to change the bylaws again. Section VII.2 and VII.3 spell out the process used to select the officers.  We use the phrase “Officer Appointment” to separate it from the Director election but the end result is that the Board elects the officers.  Section VII.3 starts: Officers shall be appointed bi-annually by a majority of all the voting members of the Board of Directors. Everything else revolves around that sentence.  We use the word appoint but they truly are elected.  There are details in the bylaws for term limits, minimum requirements for President (1 prior term as an officer), tie breakers and filling vacancies. In practice we will have an election for President, then an election for EVP and then an election for VP Marketing.  That means that losing candidates will be able to fall down the ladder and run for the next open position.  Another point to note is that officers aren’t at-large directors.  That means if a current sitting officer loses all three elections they are off the Board.  Having Board member votes public will help with the transparency of this approach. This process has a number of positive and negatives.  The biggest concern I expect to hear is that our members don’t directly choose the officers.  I’m going to try and list all the positives and negatives of this approach. Many non-profits value continuity and are slower to change than a business.  On the plus side this promotes that.  On the negative side this promotes that.  If we change too slowly the members complain that we aren’t responsive.  If we change too quickly we make mistakes and fail at various things.  We’ve been criticized for both of those lately so I’m not entirely sure where to draw the line.  My rough assumption to this point is that we’re going too slow on governance and too quickly on becoming “more than a Summit.”  This approach creates competition in the officer elections.  If you are an at-large director there is no consequence to losing an election.  If you are an officer the only way to stay on the Board is to win an officer election or an at-large election.  If you are an officer and lose an election you can always run for the next office down.  This makes it very easy for multiple people to contest an election. There is value in a person moving through the officer positions up to the Presidency.  Having the Board select the officers promotes this.  The down side is that it takes a LOT of time to get to the Presidency.  We’ve had good people struggle with burnout.  We’ve had lots of discussion around this.  The process as we’ve described it here makes it possible for someone to move quickly through the ranks but doesn’t prevent people from working their way up through each role. We talked long and hard about having the officers elected by the members.  We had a self-imposed deadline to complete these changes prior to elections this summer. The other challenge was that our original goal was to make the bylaws reflect our actual process rather than create a new one.  I believe we accomplished this goal. We ran out of time to consider this option in the detail it needs.  Having member elections for officers needs a number of problems solved.  We would need a way for candidates to fall through the election.  This is what promotes competition.  Without this few people would risk an election and we’ll be back to one candidate per slot.  We need to do this without having multiple elections.  We may be able to copy what other organizations are doing but I was surprised at how little I could find on other organizations.  We also need a way for people that lose an officer election to win an at-large election.  Otherwise we’ll have very little competition for officers. This brings me to an area that I think we as a Board haven’t done a good job.  We haven’t built a strong process to tell you who is doing a good job and who isn’t.  This is a double-edged sword.  I don’t want to highlight Board members that are failing.  That’s not a good way to get people to volunteer and run for the Board.  But I also need a way let the members make an informed choice about who is doing a good job and would make a good officer.  Encouraging Board members to blog, publishing minutes and making votes public helps in that regard but isn’t the final answer.  I don’t know what the final answer is yet.  I do know that the Board members themselves are uniquely positioned to know which other Board members are doing good work.  They know who speaks up in meetings, who works to build consensus, who has good ideas and who works with the members.  What I Could Do Better I’ve learned a lot writing this about how we communicated with our members.  The next time we revise the bylaws I’d do a few things differently.  The biggest change would be to provide better documentation.  The March 2009 minutes provide a very detailed look into what changes we wanted to make to the bylaws.  Looking back, I’m a little surprised at how closely they matched our final changes and covered the various arguments.  If you just read those you’d get 90% of what we eventually changed.  Nearly everything else was just details around implementation.  I’d also consider publishing a scope document defining exactly what we were doing any why.  I think it really helped that we had a limited, defined goal in mind.  I don’t think we did a good job communicating that goal outside the meeting minutes though. That said, I wish I’d blogged more after the August and January meeting.  I think it would have helped more people to know that this change was coming and to be ready for it. Conclusion These changes address two big concerns that the Board had.  First, it prevents a single organization from dominating the Board.  Second, it codifies and clearly spells out how officers are elected.  This is the process that was previously followed but it was somewhat murky.  These changes bring clarity to this and clearly explain the process the Board will follow. We’re going to listen to feedback until March 31st.  At that time we’ll decide whether to approve these changes.  I’m also assuming that we’ll start another round of changes in the next year or two.  Are there other issues in the bylaws that we should tackle in the future?

    Read the article

  • How do you bypass TLS/SSL cetification validation in WCF for Exchange Web Services

    - by Sevki
    I wan't to bypass SSL and use regular http protocol to connect to a Exchange 2007 server however we dont want to invest in a real SSL cert and the one we use is needed for blackberry enterprise server. Is there a way to bypass this here is the exception Request failed. The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. Service.Credentials = new WebCredentials(ShacxEwsUserName, ShacxEwsUserPassword, ShacxEwsUserDomain); Service.Url = new Uri(ShacxEwsServiceUrl); How do you make ExchangeService accept bad ssl.

    Read the article

  • Android custom ListView unable to click on items

    - by MattC
    So I have a custom ListView object. The list items have two textviews stacked on top of each other, plus a horizontal progress bar that I want to remain hidden until I actually do something. To the far right is a checkbox that I only want to display when the user needs to download updates to their database(s). When I disable the checkbox by setting the visibility to Visibility.GONE, I am able to click on the list items. When the checkbox is visible, I am unable to click on anything in the list except the checkboxes. I've done some searching but haven't found anything relevant to my current situation. I found this question but I'm using an overridden ArrayAdapter since I'm using ArrayLists to contain the list of databases internally. Do I just need to get the LinearLayout view and add an onClickListener like Tom did? I'm not sure. Here's the listview row layout XML: <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:layout_width="fill_parent" android:layout_height="?android:attr/listPreferredItemHeight" android:padding="6dip"> <LinearLayout android:orientation="vertical" android:layout_width="0dip" android:layout_weight="1" android:layout_height="fill_parent"> <TextView android:id="@+id/UpdateNameText" android:layout_width="wrap_content" android:layout_height="0dip" android:layout_weight="1" android:textSize="18sp" android:gravity="center_vertical" /> <TextView android:layout_width="fill_parent" android:layout_height="0dip" android:layout_weight="1" android:id="@+id/UpdateStatusText" android:singleLine="true" android:ellipsize="marquee" /> <ProgressBar android:id="@+id/UpdateProgress" android:layout_width="fill_parent" android:layout_height="wrap_content" android:indeterminateOnly="false" android:progressDrawable="@android:drawable/progress_horizontal" android:indeterminateDrawable="@android:drawable/progress_indeterminate_horizontal" android:minHeight="10dip" android:maxHeight="10dip" /> </LinearLayout> <CheckBox android:text="" android:id="@+id/UpdateCheckBox" android:layout_width="wrap_content" android:layout_height="wrap_content" /> </LinearLayout> And here's the class that extends the ListActivity. Obviously it's still in development so forgive the things that are missing or might be left laying around: import java.util.List; import android.app.ListActivity; import android.content.Context; import android.os.Bundle; import android.view.LayoutInflater; import android.view.View; import android.view.ViewGroup; import android.widget.ArrayAdapter; import android.widget.Button; import android.widget.CheckBox; import android.widget.ListView; import android.widget.ProgressBar; import android.widget.TextView; import com.xxxx.android.R; import com.xxxx.android.DAO.AccountManager; import com.xxxx.android.model.UpdateItem; public class UpdateActivity extends ListActivity { AccountManager lookupDb; boolean allSelected; UpdateListAdapter list; @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); lookupDb = new AccountManager(this); lookupDb.loadUpdates(); setContentView(R.layout.update); allSelected = false; list = new UpdateListAdapter(this, R.layout.update_row, lookupDb.getUpdateItems()); setListAdapter(list);

    Read the article

  • Mock a Linq to Sql EntityRef using Moq?

    - by Jeremy Holt
    My datacontext contains a table named Userlog with a one to many relationship with table UserProfile. In class UserLog public UserProfile UserProfile { get {return this._UserProfile.Entity;} } In class UserProfile public EntitySet<UserLog> UserLogs { get{return this._UserLogs;} } { set {this._UserLogs.Assign(value); } How would I go about mocking (using Moq) UserLog.UserProfile without changing the autogenerated code? What I would like to do is something like: var mockUserLog = new Mock<UserLog>(); mockUserLog.Setup(c=>c.UserProfile.FirstName).Returns("Fred"); etc I can do this if I go into the designer.cs and make FirstName and UserProfile virtual, however I would like to do this in the partial class. Any ideas? Thanks Jeremy

    Read the article

  • Repository Pattern and Entity Framework.

    - by vitorcast
    Hi people, I want to make an implementation with repository pattern with ASP.NET MVC 2 and Entity Framework but I have had some issues in the process. First of all, I have 2 entities that has a relationship between them, like Order and Product. When I generate my dbml file it gaves me a class Order with a property that map a "ProductSet" and one class Product with a property that map wich Order that Product relates itself. So I create my Repository pattern like IReporitory with the basic CRUD operations and inside my controllers I implement the ProductRepository or OrderRepository. The problem occurs when I try to create Product and have to assign my Order on it, like ProductOne.Order = _orderRepository.Find(orderId); That operation gave me some strange behavior and I can't find out what is wrong with it. Thanks for the help.

    Read the article

  • IE / Facebook Issue : Why Facebook Like box not display in Internet Explorer6 - IE8 ?

    - by Vaibhav Bhalke
    Now My final Application.html file contains are < !DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/DTD/strict.dtd" < html xmlns="http://www.w3.org/1999/xhtml" xmlns:fb="http://www.facebook.com/2008/fbml" < head < meta http-equiv="X-UA-Compatible" content="IE=EmulateIE7" / < /head < body < script type="text/javascript" language="javascript" src="http://static.ak.connect.facebook.com/js/api_lib/v0.4/FeatureLoader.js.php" < /script < script type="text/javascript" FB_RequireFeatures(["Connect"], function(){ var x=1; } ); < /script < script src="http://static.ak.connect.facebook.com/connect.php/en_US" type="text/javascript" < /script < /body < /html My Java code for LIke Box is as follows FBPageFanWidget.java class FBPageFanWidget extends Composite { public FBPageFanWidget() { VerticalPanel mainPanel = new VerticalPanel(); mainPanel .getElement() .setInnerHTML( "< script type='text/javascript' src='http://static.ak.connect.facebook.com/js/api_lib/v0.4/FeatureLoader.js.php/en_US'< /script< script type='text/javascript'FB.init('');< /script< fb:fan profile_id=\"113106068709539\" stream=\"0\" connections=\"10\" logobar=\"0\" width=\"244\" height=\"240\" css='http://127.0.01:8080/webapplicationname/facebook.css?1'< /fb:fan"); initWidget(mainPanel); } } We used proper facebook API_KEY & PAGE_ID It's very important for us to Show Facebook like Box in Our web application Because we have more IE users. If we add FBPageFanWidget.java in our web applicaton then Our Home page is not display in IE because we add Facebook LikeBox so we made changes in Our FBPageFanWidget.java class FBPageFanWidget extends Composite { public FBPageFanWidget() { VerticalPanel mainPanel = new VerticalPanel(); if (!isIE()) { mainPanel.getElement() .setInnerHTML("<script type='text/javascript' src='http://static.ak.connect.facebook.com/js/api_lib/v0.4/FeatureLoader.js.php/en_US'></script><script type='text/javascript'>FB.init('');</script><fb:fan profile_id=\"113106068709539\" stream=\"0\" connections=\"10\" logobar=\"0\" width=\"244\" height=\"240\" css='http://127.0.01:8080/webapplicationname/facebook.css?1'></fb:fan>"); } initWidget(mainPanel); } public native String getUserAgent() /-{ return navigator.userAgent; }-/; private boolean isIE() { return (getUserAgent().indexOf("MSIE") > -1); } } when we did this changes Then Facebook Like Box display in every browser excluding IE6 - IE8 :( and also display Our Home page in IE8 excludeing Facebook Like Box. It means There is probelm in IE ? or what changes i need to do in my html file or java file to show facebook like Box properly with displaying our home page It's very important for us to Show Facebook like Box in Our web application Because we have more IE users. Please Reply ASAP. Hope-for Best Co-operation from your side !!!!

    Read the article

  • Entity Framework 4.0 and DDD patterns

    - by Voice
    Hi everybody I use EntityFramework as ORM and I have simple POCO Domain Model with two base classes that represent Value Object and Entity Object Patterns (Evans). These two patterns is all about equality of two objects, so I overrode Equals and GetHashCode methods. Here are these two classes: public abstract class EntityObject<T>{ protected T _ID = default(T); public T ID { get { return _ID; } protected set { _ID = value; } } public sealed override bool Equals(object obj) { EntityObject<T> compareTo = obj as EntityObject<T>; return (compareTo != null) && ((HasSameNonDefaultIdAs(compareTo) || (IsTransient && compareTo.IsTransient)) && HasSameBusinessSignatureAs(compareTo)); } public virtual void MakeTransient() { _ID = default(T); } public bool IsTransient { get { return _ID == null || _ID.Equals(default(T)); } } public override int GetHashCode() { if (default(T).Equals(_ID)) return 0; return _ID.GetHashCode(); } private bool HasSameBusinessSignatureAs(EntityObject<T> compareTo) { return ToString().Equals(compareTo.ToString()); } private bool HasSameNonDefaultIdAs(EntityObject<T> compareTo) { return (_ID != null && !_ID.Equals(default(T))) && (compareTo._ID != null && !compareTo._ID.Equals(default(T))) && _ID.Equals(compareTo._ID); } public override string ToString() { StringBuilder str = new StringBuilder(); str.Append(" Class: ").Append(GetType().FullName); if (!IsTransient) str.Append(" ID: " + _ID); return str.ToString(); } } public abstract class ValueObject<T, U> : IEquatable<T> where T : ValueObject<T, U> { private static List<PropertyInfo> Properties { get; set; } private static Func<ValueObject<T, U>, PropertyInfo, object[], object> _GetPropValue; static ValueObject() { Properties = new List<PropertyInfo>(); var propParam = Expression.Parameter(typeof(PropertyInfo), "propParam"); var target = Expression.Parameter(typeof(ValueObject<T, U>), "target"); var indexPar = Expression.Parameter(typeof(object[]), "indexPar"); var call = Expression.Call(propParam, typeof(PropertyInfo).GetMethod("GetValue", new[] { typeof(object), typeof(object[]) }), new[] { target, indexPar }); var lambda = Expression.Lambda<Func<ValueObject<T, U>, PropertyInfo, object[], object>>(call, target, propParam, indexPar); _GetPropValue = lambda.Compile(); } public U ID { get; protected set; } public override Boolean Equals(Object obj) { if (ReferenceEquals(null, obj)) return false; if (obj.GetType() != GetType()) return false; return Equals(obj as T); } public Boolean Equals(T other) { if (ReferenceEquals(null, other)) return false; if (ReferenceEquals(this, other)) return true; foreach (var property in Properties) { var oneValue = _GetPropValue(this, property, null); var otherValue = _GetPropValue(other, property, null); if (null == oneValue && null == otherValue) return false; if (false == oneValue.Equals(otherValue)) return false; } return true; } public override Int32 GetHashCode() { var hashCode = 36; foreach (var property in Properties) { var propertyValue = _GetPropValue(this, property, null); if (null == propertyValue) continue; hashCode = hashCode ^ propertyValue.GetHashCode(); } return hashCode; } public override String ToString() { var stringBuilder = new StringBuilder(); foreach (var property in Properties) { var propertyValue = _GetPropValue(this, property, null); if (null == propertyValue) continue; stringBuilder.Append(propertyValue.ToString()); } return stringBuilder.ToString(); } protected static void RegisterProperty(Expression<Func<T, Object>> expression) { MemberExpression memberExpression; if (ExpressionType.Convert == expression.Body.NodeType) { var body = (UnaryExpression)expression.Body; memberExpression = body.Operand as MemberExpression; } else memberExpression = expression.Body as MemberExpression; if (null == memberExpression) throw new InvalidOperationException("InvalidMemberExpression"); Properties.Add(memberExpression.Member as PropertyInfo); } } Everything was OK until I tried to delete some related objects (aggregate root object with two dependent objects which was marked for cascade deletion): I've got an exception "The relationship could not be changed because one or more of the foreign-key properties is non-nullable". I googled this and found http://blog.abodit.com/2010/05/the-relationship-could-not-be-changed-because-one-or-more-of-the-foreign-key-properties-is-non-nullable/ I changed GetHashCode to base.GetHashCode() and error disappeared. But now it breaks all my code: I can't override GetHashCode for my POCO objects = I can't override Equals = I can't implement Value Object and Entity Object patters for my POCO objects. So, I appreciate any solutions, workarounds here etc.

    Read the article

  • Android AsyncTask testing problem with Android Test Framework

    - by Vlad
    I have a very simple AsyncTask implementation example and have problem to test it using Android JUnit framework. It works just fine when I instantiate and execute it in normal application. However when it's executed from any of Android Testing framework classes (i.e. AndroidTestCase, ActivityUnitTestCase, ActivityInstrumentationTestCase2 etc) it behaves sarngely: - It executes doInBackground() method correctly - However it doesn't invokes any of its notification methods (onPostExecute(), onProgressUpdate(), etc) -- just silently ignores them whitout showing any errors. This is very simple AsyncTask example package kroz.andcookbook.threads.asynctask; import android.os.AsyncTask; import android.util.Log; import android.widget.ProgressBar; import android.widget.Toast; public class AsyncTaskDemo extends AsyncTask<Integer, Integer, String> { AsyncTaskDemoActivity _parentActivity; int _counter; int _maxCount; public AsyncTaskDemo(AsyncTaskDemoActivity asyncTaskDemoActivity) { _parentActivity = asyncTaskDemoActivity; } @Override protected void onPreExecute() { super.onPreExecute(); _parentActivity._progressBar.setVisibility(ProgressBar.VISIBLE); _parentActivity._progressBar.invalidate(); } @Override protected String doInBackground(Integer... params) { _maxCount = params[0]; for (_counter = 0; _counter <= _maxCount; _counter++) { try { Thread.sleep(1000); publishProgress(_counter); } catch (InterruptedException e) { // Ignore } } } @Override protected void onProgressUpdate(Integer... values) { super.onProgressUpdate(values); int progress = values[0]; String progressStr = "Counting " + progress + " out of " + _maxCount; _parentActivity._textView.setText(progressStr); _parentActivity._textView.invalidate(); } @Override protected void onPostExecute(String result) { super.onPostExecute(result); _parentActivity._progressBar.setVisibility(ProgressBar.INVISIBLE); _parentActivity._progressBar.invalidate(); } @Override protected void onCancelled() { super.onCancelled(); _parentActivity._textView.setText("Request to cancel AsyncTask"); } } This is a test case. Here AsyncTaskDemoActivity is a very simple Activity providing UI for testing AsyncTask in mode: package kroz.andcookbook.test.threads.asynctask; import java.util.concurrent.ExecutionException; import kroz.andcookbook.R; import kroz.andcookbook.threads.asynctask.AsyncTaskDemo; import kroz.andcookbook.threads.asynctask.AsyncTaskDemoActivity; import android.content.Intent; import android.test.ActivityUnitTestCase; import android.widget.Button; public class AsyncTaskDemoTest2 extends ActivityUnitTestCase<AsyncTaskDemoActivity> { AsyncTaskDemo _atask; private Intent _startIntent; public AsyncTaskDemoTest2() { super(AsyncTaskDemoActivity.class); } protected void setUp() throws Exception { super.setUp(); _startIntent = new Intent(Intent.ACTION_MAIN); } protected void tearDown() throws Exception { super.tearDown(); } public final void testExecute() { startActivity(_startIntent, null, null); Button btnStart = (Button) getActivity().findViewById(R.id.Button01); btnStart.performClick(); assertNotNull(getActivity()); } } All this code is working just fine, except the fact that AsynTask doesn't invoke it's notification methods when executed by whithin Android Testing Framework. Any ideas?

    Read the article

  • ADO Entity Framework 4 to WPF Datagrid. DatagridComboBox nightmare.

    - by Jason
    The WPF datagrid -seems- like it's going to work, but the combobox implementation does not work straight from the designer. So I'm left wandering around in the XAML randomly changing things trying to get it to work. The problems are numerous. I want to display a foreign key relationship (with drop down) instead of a bunch of numbers for a selection. It seems like it shouldn't be this hard. I can get the right values to show up (their description instead of an ID), but the table freaks out thinking that all the values have been modified. If I select a drop down, it refuses to allow me to edit anything else. I want to chalk this up as a .NET bug, but since I'm new to WPF datagrids, it's probably just me. Here is the code. <DataGridComboBoxColumn Header="Make Up" ItemsSource="{Binding Source={StaticResource materialMakeUpTypesViewSource}}" DisplayMemberPath="Description" TextBinding="{Binding Path=MaterialMakeUpType.Description}" SelectedItemBinding="{Binding Path=MaterialMakeUpType.Description}" SelectedValueBinding="{Binding Path=MaterialMakeUpType.ID}" />

    Read the article

  • multiple key ranges as parameters to a couchdb view

    - by kolosy
    is there a way to send multiple startKey/endKey pairs to a view, akin to the keys: [] array that can be posted for keys? the underlying problem - let's say my documents have "categories" and timestamps. if i want all documents in the "foo" category that have a timestamp that's within the last two hours, it's simple: function (doc) { emit([doc.category, doc.timestamp], null); } and then query as GET server:5894/.../myview?startKey=[foo, |now - 2 hours|]&endkey=[foo, |now|] the problem comes when i want something in categories foo or bar, within the last two hours. if i didn't care about time, i could just pull directly by key through the keys collection. unfortunately, i have no such option with ranges. what i ended up doing in the meantime is rounding the timestamp to two-hour blocks, and then multiplexing the query out: POST server:5894/.../myview keys=[[foo, 0 hours], [foo, 2 hours], [bar, 0 hours], [bar, 2 hours]] it works, but will get messy if i want to go back a large amount of time (in relationship to the blocksize)

    Read the article

  • Winforms role based security limitations

    - by muhan
    I'm implementing role based security using Microsoft's membership and role provider. The theoretical problem I'm having is that you implement a specific role on a method such as: [PrincipalPermissionAttribute(SecurityAction.Demand, Role="Supervisor")] private void someMethod() {} What if at some point down the road, I don't want Supervisors to access someMethod() anymore? Wouldn't I have to change the source code to make that change? Am I missing something? It seems there has to be some way to abstract the relationship between the supervisors role and the method so I can create a way in the application to change this coupling of role permission to method. Any insight or direction would be appreciated. Thank you.

    Read the article

  • Android: canvas.drawBitmap with Orientation(MagnetField)Sensor

    - by user368374
    hallo, i am developing Android app with orientation sensor. now i got problem. What i want to do is, change scale and position of bitmap which read from sd card. The scale and position depend on value from orientation sensor. i use canvas.drawBitmap(), then it cause problem. the app is just shut down. other drawXXX()methods have no problem..any suggestion? public class AnMagImgtestActivity extends Activity implements SensorEventListener { private SensorManager sensorManager; private MySurfaceView view; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); sensorManager = (SensorManager)getSystemService(SENSOR_SERVICE); view = new MySurfaceView(this); ///make it fullscreen getWindow().addFlags(WindowManager.LayoutParams.FLAG_FULLSCREEN); requestWindowFeature(Window.FEATURE_NO_TITLE); ///give screen a hiropon getWindow().addFlags(WindowManager.LayoutParams.FLAG_KEEP_SCREEN_ON); setContentView(view); } @Override protected void onResume() { super.onResume(); List sensors = sensorManager.getSensorList(Sensor.TYPE_ORIENTATION); if (sensors.size() 0) { Sensor sensor = sensors.get(0); sensorManager.registerListener(this, sensor, SensorManager.SENSOR_DELAY_GAME); } } @Override protected void onPause() { super.onPause(); sensorManager.unregisterListener(this); } @Override public void onAccuracyChanged(Sensor sensor, int accuracy) { } @Override public void onSensorChanged(SensorEvent event) { view.onValueChanged(event.values); } class MySurfaceView extends SurfaceView implements SurfaceHolder.Callback{ public MySurfaceView(Context context) { super(context); getHolder().addCallback(this); } @Override public void surfaceChanged(SurfaceHolder holder, int format, int width, int height) { onValueChanged(new float[3]); } @Override public void surfaceCreated(SurfaceHolder holder) { } @Override public void surfaceDestroyed(SurfaceHolder holder) { } void onValueChanged(float[] values) { Canvas canvas = getHolder().lockCanvas(); //String imgfn = "/sdcard/seekcamera"+"/"+regcode+"/to"+"/"+tempnum+".jpg"; String imgfn = "/sdcard/seekcamera"+"/de"+"/to"+"1.jpg"; //String imgfn = "/sdcard/seekcamera"+"/00"+"/00"+"/"+"42.jpg"; File mf = new File(imgfn); Bitmap bitmap0 = BitmapFactory.decodeFile(mf.getPath()); if (canvas != null) { Paint paint = new Paint(); paint.setAntiAlias(true); paint.setColor(Color.GREEN); paint.setTextSize(12); canvas.drawColor(Color.BLACK); paint.setAlpha(200); for (int i = 0; i < values.length; i++) { canvas.drawText("values[" + i + "]: " + values[i], 0, paint.getTextSize() * (i + 1), paint); } paint.setColor(Color.WHITE); paint.setTextSize(100+values[2]); paint.setAlpha( (int) (255-values[2])); canvas.drawText("Germany", values[0]*1+20, paint.getTextSize() * 1+values[2]-80, paint); ///here is the problem.. canvas.drawBitmap(bitmap0, values[0],values[1], paint); getHolder().unlockCanvasAndPost(canvas); } } } }

    Read the article

  • Refinery CMS (Rails): Creating a plugin or plugins with multiple models and relationships

    - by jklina
    My goal is to create a way for an admin to create two models in the Refinery admin: Campaigns and Videos I would like to have it setup so that a Campaign has many Videos and that each Video belongs to a Campaign. Both Videos and Campaigns will have a title, description, and a preview image. I'm not certain of the best way to go about this. Is it possible to setup two plugins and form a relationship between the two? Or, should I create one plugin with both models. If someone could point me in the right direction or a good example of a solution to a similar problem, I would be grateful. Thank you for looking!

    Read the article

  • Nullable One To One Relationships with Integer Keys in LINQ-to-SQL

    - by Craig Walker
    I have two objects (Foo and Bar) that have a one-to-zero-or-one relationship between them. So, Foo has a nullable foreign key reference to Bar.ID and a (nullbusted) unique index to enforce the "1" side. Bar.ID is an int, and so Foo.BarID is a nullable int. The problem occurs in the LINQ-to-SQL DBML mapping of .NET types to SQL datatypes. Since int is not a nullable type in .NET, it gets wrapped in a Nullable<int>. However, this is not the same type as int, and so Visual Studio gives me this error message when I try to create the OneToOne Association between them: Cannot create an association "Bar_Foo". Properties do not have matching types: "ID", "BarID". Is there a way around this?

    Read the article

  • Android question - how to prep 100 images to be shown via Fling/Swipe?

    - by fooyee
    I'm totally new to this, been tinkering around for a week. Came up with a simple image viewer app for 2 images. Feature: Left and right swipes will switch the images. Dead simple. What i'd like to do: Have up to 100 images. note: All my images are in my res/drawable folder. They're named image1.png to image100.png I obviously don't want to do: ImageView i = new ImageView(this); i.setImageResource(R.drawable.image1); viewFlipper.addView(i); ImageView i2 = new ImageView(this); i2.setImageResource(R.drawable.image2); viewFlipper.addView(i2); ImageView i3 = new ImageView(this); i3.setImageResource(R.drawable.image3); viewFlipper.addView(i3); all the way to i100. how do I make this into a loop, which is flexible and reads everything from the drawable folder ( and not be limited to 100 images)? source: public class ImageViewTest extends Activity { private static final String LOGID = "CHECKTHISOUT"; private static final int SWIPE_MIN_DISTANCE = 120; private static final int SWIPE_MAX_OFF_PATH = 250; private static final int SWIPE_THRESHOLD_VELOCITY = 200; private GestureDetector gestureDetector; View.OnTouchListener gestureListener; private Animation slideLeftIn; private Animation slideLeftOut; private Animation slideRightIn; private Animation slideRightOut; private ViewFlipper viewFlipper; String message = "Initial Message"; /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); //Set up viewflipper viewFlipper = new ViewFlipper(this); ImageView i = new ImageView(this); i.setImageResource(R.drawable.sample_1); ImageView i2 = new ImageView(this); i2.setImageResource(R.drawable.sample_2); viewFlipper.addView(i); viewFlipper.addView(i2); //set up animations slideLeftIn = AnimationUtils.loadAnimation(this, R.anim.slide_left_in); slideLeftOut = AnimationUtils.loadAnimation(this, R.anim.slide_left_out); slideRightIn = AnimationUtils.loadAnimation(this, R.anim.slide_right_in); slideRightOut = AnimationUtils.loadAnimation(this, R.anim.slide_right_out); //put up a brownie as a starter setContentView(viewFlipper); gestureDetector = new GestureDetector(new MyGestureDetector()); } public class MyGestureDetector extends SimpleOnGestureListener { @Override public boolean onFling(MotionEvent e1, MotionEvent e2, float velocityX, float velocityY) { try { if (Math.abs(e1.getY() - e2.getY()) > SWIPE_MAX_OFF_PATH) return false; // right to left swipe if(e1.getX() - e2.getX() > SWIPE_MIN_DISTANCE && Math.abs(velocityX) > SWIPE_THRESHOLD_VELOCITY) { Log.v(LOGID,"right to left swipe detected"); viewFlipper.setInAnimation(slideLeftIn); viewFlipper.setOutAnimation(slideLeftOut); viewFlipper.showNext(); setContentView(viewFlipper); } // left to right swipe else if (e2.getX() - e1.getX() > SWIPE_MIN_DISTANCE && Math.abs(velocityX) > SWIPE_THRESHOLD_VELOCITY) { Log.v(LOGID,"left to right swipe detected"); viewFlipper.setInAnimation(slideRightIn); viewFlipper.setOutAnimation(slideRightOut); viewFlipper.showPrevious(); setContentView(viewFlipper); } } catch (Exception e) { // nothing } return false; } } // This doesn't work @Override public boolean onTouchEvent(MotionEvent event) { if (gestureDetector.onTouchEvent(event)){ Log.v(LOGID,"screen touched"); return true; } else{ return false; } } }

    Read the article

  • Button click does not start Service in Android App Widget

    - by Feanor
    I'm having trouble starting a Service to update an AppWidget that I'm creating as an exercise. I'm trying to get the latitude and longitude of spoofed location data from DDMS to display in the widget. The widget uses a service to update the TextView, which may be slightly overkill, but I wanted to follow the template that seems to be common in AppWidgets that do more work (like the Forecast widget or the Wiktionary widget). Right now, I'm not getting any error messages or strange behavior; nothing at all happens when the button is pressed. I'm a bit mystified as to what might be wrong. Could anyone out there point me in the right direction? Additionally, if my logic for location is faulty, I'd love recommendations on that too. I've looked at several blogs, the Google examples, and the documentation, but I feel a little fuzzy on how it works. Here is the current state of the widget: public class Widget extends AppWidgetProvider { static final String TAG = "Widget"; /** * {@inheritDoc} */ public void onUpdate(Context context, AppWidgetManager appWidgetManager, int[] appWidgetIds) { // Create an intent to launch the service Intent serviceIntent = new Intent(context, UpdateService.class); // PendingIntent is required for the onClickPendingIntent that actually // starts the service from a button click PendingIntent pendingServiceIntent = PendingIntent.getService(context, 0, serviceIntent, 0); // Get the layout for the App Widget and attach a click listener to the // button RemoteViews views = new RemoteViews(context.getPackageName(), R.layout.main); views.setOnClickPendingIntent(R.id.address_button, pendingServiceIntent); super.onUpdate(context, appWidgetManager, appWidgetIds); } // To prevent any ANR timeouts, we perform the update in a service; // really should have its own thread too public static class UpdateService extends Service { static final String TAG = "UpdateService"; private LocationManager locationManager; private Location currentLocation; private double latitude; private double longitude; public void onStart(Intent intent, int startId) { // Get a LocationManager from the system services locationManager = (LocationManager) getSystemService(Context.LOCATION_SERVICE); // Register for updates from spoofed GPS locationManager.requestLocationUpdates("gps", 30000L, 0.0f, new LocationListener() { @Override public void onLocationChanged(Location location) { currentLocation = location; } @Override public void onProviderDisabled(String provider) {} @Override public void onProviderEnabled(String provider) {} @Override public void onStatusChanged(String provider, int status, Bundle extras) {} }); // Get the last known location from GPS currentLocation = locationManager.getLastKnownLocation("gps"); // Build the widget update RemoteViews updateViews = buildUpdate(this); // Push update for this widget to the home screen ComponentName thisWidget = new ComponentName(this, Widget.class); // AppWidgetManager updates AppWidget state; gets information about // installed AppWidget providers and other AppWidget related state AppWidgetManager manager = AppWidgetManager.getInstance(this); // Updates the views based on the RemoteView returned from the // buildUpdate method (stored in updateViews) manager.updateAppWidget(thisWidget, updateViews); } public RemoteViews buildUpdate(Context context) { latitude = currentLocation.getLatitude(); longitude = currentLocation.getLongitude(); RemoteViews updateViews = new RemoteViews(context.getPackageName(), R.layout.main); updateViews.setTextViewText(R.id.latitude_text, "" + latitude); updateViews.setTextViewText(R.id.longitude_text, "" + longitude); return updateViews; } @Override public IBinder onBind(Intent intent) { // We don't need to bind to this service return null; } } }

    Read the article

  • Android - Custom Adapter Problem

    - by Ryan
    Hello, I seem to be having a problem with my Custom Adapter view. When I display the list, it only displays a white screen. Here is how it works: 1.) I send a JSON request 2.) populate the ArrayList with the returned results 3.) create a custom adapter 4.) then bind the adapter. Here is steps 2-4 private void updateUI() { ListView myList = (ListView) findViewById(android.R.id.list); itemList = new ArrayList(); Iterator it = data.entrySet().iterator(); while (it.hasNext()) { //Get the key name and value for it Map.Entry pair = (Map.Entry)it.next(); String keyName = (String) pair.getKey(); String value = pair.getValue().toString(); if (value != null) { ListItem li = new ListItem(keyName, value, false); itemList.add(li); } } CustomAdapter mAdapter = new CustomAdapter( mContext, itemList); myList.setAdapter(mAdapter); //Bind the adapter to the list //Tell the dialog it's cool now. dismissDialog(0); //Show next screen flipper.setInAnimation(inFromRightAnimation()); flipper.setOutAnimation(outToRightAnimation()); flipper.showNext(); } And here is my CustomAdapter class: import java.util.List; import android.R.color; import android.content.Context; import android.view.View; import android.view.ViewGroup; import android.widget.BaseAdapter; import android.widget.ImageView; import android.widget.RelativeLayout; import android.widget.TextView; class MyAdapterView extends RelativeLayout { public MyAdapterView(Context c, ListItem li) { super( c ); RelativeLayout rL = new RelativeLayout(c); RelativeLayout.LayoutParams containerParams = new RelativeLayout.LayoutParams( ViewGroup.LayoutParams.FILL_PARENT, ViewGroup.LayoutParams.FILL_PARENT); rL.setLayoutParams(containerParams); rL.setBackgroundColor(color.white); ImageView img = new ImageView (c); img.setImageResource(li.getImage()); img.setPadding(5, 5, 10, 5); rL.addView(img, 48, 48); TextView top = new TextView(c); top.setText(li.getTopText()); top.setTextColor(color.black); top.setTextSize(20); top.setPadding(0, 20, 0, 0); rL.addView(top,ViewGroup.LayoutParams.FILL_PARENT, ViewGroup.LayoutParams.WRAP_CONTENT); TextView bot = new TextView( c ); bot.setText(li.getBottomText()); bot.setTextColor(color.black); bot.setTextSize(12); bot.setPadding(0, 0, 0, 10); bot.setAutoLinkMask(1); rL.addView(bot,ViewGroup.LayoutParams.FILL_PARENT, ViewGroup.LayoutParams.WRAP_CONTENT); } } public class CustomAdapter extends BaseAdapter { private Context context; private List itemList; public CustomAdapter(Context c, List itemL ) { this.context = c; this.itemList = itemL; } public int getCount() { return itemList.size(); } public Object getItem(int position) { return itemList.get(position); } public long getItemId(int position) { return position; } @Override public View getView(int position, View convertView, ViewGroup parent) { ListItem li = itemList.get(position); return new MyAdapterView(this.context, li); } } Does anyone have any idea why this displays a white screen upon completion?? Thanks in advance!

    Read the article

  • Get information about AutocompleteTextView from resulting AutoCompleteTextView$DropDownListView

    - by Stev_k
    I'm using 3 AutocompleteTextViews to suggest entries from a database. I subclassed AutocompleteTextView to handle setting the default text to null when clicked and setting back to the default instructions if moved away and nothing is entered. I was using a SimpleCursorAdapter to bind to the view, but I discovered that there was no way I could get the id of the AutocompleteTextView from an OnItemClickListener, which I needed to put additional information from the selected row in a variable depending on which AutocompleteTextView it was from. All I could access was the AutoCompleteTextView$DropDownListView, which is an undocumented inner class that appears to offer no real functionality. Neither was there a way to go up the view hierarchy to get the original AutocompleteTextView. So I subclassed SimpleCursorAdapter and added an int to the constructor to identify which AutocompleteTextView the adapter was from, and I was able to access this from the view passed into OnItemClick(). So, although my solution works fine, I wonder if it is possible to get the id of an AutocompleteTextView from its DropDownListView? I am also using another database query which gets the id from the OnItemClick and then looks up the data for that item, because I couldn't find a way of converting more than one column to a string. Should I be using CursorAdapter for this, to save initiating another query? Oh, and another thing, do I need a database cursor initially (all_cursor) when all I'm doing is filtering on it to get a new cursor? Seems like overkill. Activity .... dbse.openDataBase(); Cursor all_Cursor = dbse.autocomplete_query(); startManagingCursor(all_Cursor); String[] from_all = new String[]{DbAdapter.KEY_NAME}; int[] to_all = new int[] {android.R.id.text1}; from_adapt = new AutocompleteAdapter(FROM_DBADAPTER, this,android.R.layout.simple_dropdown_item_1line, all_Cursor, from_all, to_all); from_adapt.setStringConversionColumn(1); from_adapt.setFilterQueryProvider(this); to_adapt = new AutocompleteAdapter(TO_DBADAPTER, this,android.R.layout.simple_dropdown_item_1line, all_Cursor, from_all, to_all); to_adapt.setStringConversionColumn(1); to_adapt.setFilterQueryProvider(this); from_auto_complete = (Autocomplete) findViewById(R.id.entry_from); from_auto_complete.setAdapter(from_adapt); from_auto_complete.setOnItemClickListener(this); to_auto_complete = (Autocomplete) findViewById(R.id.entry_to); to_auto_complete.setAdapter(to_adapt); to_auto_complete.setOnItemClickListener(this); public void onItemClick (AdapterView<?> parent, View view, int position, long id) { Cursor selected_row_cursor = dbse.data_from_id(id); selected_row_cursor.moveToFirst(); String lat = selected_row_cursor.getString(1); String lon = selected_row_cursor.getString(2); int source = ((AutocompleteAdapter) parent.getAdapter()).getSource(); Autocomplete class: public class Autocomplete extends AutoCompleteTextView implements OnTouchListener,OnFocusChangeListener{ String textcontent; Context mycontext = null; int viewid = this.getId(); public Autocomplete(Context context, AttributeSet attrs) { super(context, attrs); textcontent = this.getText().toString(); mycontext = context; this.setOnFocusChangeListener(this); this.setOnTouchListener(this); } public boolean onTouch(View v, MotionEvent event) { if (textcontent.equals(mycontext.getString(R.string.from_textbox)) | textcontent.equals(mycontext.getString(R.string.to_textbox)) | textcontent.equals(mycontext.getString(R.string.via_textbox))) { this.setText(""); } return false; } public void onFocusChange(View v, boolean hasFocus) { if (hasFocus == false) { int a = this.getText().length(); if (a == 0){ if (viewid == R.id.entry_from) {this.setText(R.string.from_textbox);} if (viewid == R.id.entry_to) {this.setText(R.string.to_textbox);} if (viewid == R.id.entry_via) {this.setText(R.string.via_textbox);} } } } } Adapter: public class AutocompleteAdapter extends SimpleCursorAdapter { int source; public AutocompleteAdapter(int query_source, Context context, int layout, Cursor c, String[] from, int[] to) { super(context, layout, c, from, to); source = query_source; } public int getSource() { return source; } } sorry that's a lot of code! Thanks for your help. Stephen

    Read the article

  • Django: UserProfile with Unique Foreign Key in Django Admin

    - by lazerscience
    Hi, I have extended Django's User Model using a custom user profile called UserExtension. It is related to User through a unique ForeignKey Relationship, which enables me to edit it in the admin in an inline form! I'm using a signal to create a new profile for every new user: def create_user_profile(sender, instance, created, **kwargs): if created: try: profile, created = UserExtension.objects.get_or_create(user=instance) except: pass post_save.connect(create_user_profile, sender=User) (as described here for example: http://stackoverflow.com/questions/44109/extending-the-user-model-with-custom-fields-in-django) The problem is, that, if I create a new user through the admin, I get an IntegritiyError on saving "column user_id is not unique". It doesnt seem that the signal is called twice, but i guess the admin is trying to save the profile AFTERWARDS? But I need the creation through signal if I create a new user in other parts of the system!

    Read the article

  • iPhone CoreData join

    - by Ken
    Hi guys, long time reader, first time poster. (A link to this schema is located here) http://www.weeshsoft.com/pix/DatabasePic.jpg I'm trying to get all LanguageEntries from a database for a given category.categoryName and languageset.languageSetName e.g. NSFetchRequest* fetchRequest = [[NSFetchRequest alloc] init]; NSEntityDescription *entity = [NSEntityDescription entityForName:@"LanguageEntry" inManagedObjectContext:del.managedObjectContext]; [fetchRequest setEntity:entity]; NSString* predicateString = [NSString stringWithFormat:@"Category.categoryName = %@ AND LanguageSet.languageSetName = %@", @"Food", @"English####Spanish"]; fetchRequest.predicate = [NSPredicate predicateWithFormat:predicateString]; NSError *error = nil; NSArray* objects = [del.managedObjectContext executeFetchRequest:fetchRequest error:&error]; This always returns 0 objects. If I set the predicate string to match on one relationship (e.g. Category.categoryName = Food or languageSet.languageSetName = English####Spanish) it will return data. This is baffling, can anyone shed some light? -Ken

    Read the article

  • JSF: Cannot catch ViewExpiredException

    - by ifischer
    I'm developing a JSF 2.0 application on Glassfish v3 and i'm trying to handle the ViewExpiredException. But whatever i do, i always get a Glassfish error report instead of my own error page. To simulate the occurrence of the VEE, i inserted the following function into my backing bean, which fires the VEE. I'm triggering this function from my JSF page through a commandLink. The Code: @Named public class PersonHome { (...) public void throwVEE() { throw new ViewExpiredException(); } } At first i tried it by simply adding an error-page to my web.xml: <error-page> <exception-type>javax.faces.application.ViewExpiredException</exception-type> <location>/error.xhtml</location> </error-page> But this doesn't work, i'm not redirected to error but i'm shown the Glassfish errorpage, which shows a HTTP Status 500 page with the following content: description:The server encountered an internal error () that prevented it from fulfilling this request. exception: javax.servlet.ServletException: javax.faces.application.ViewExpiredException root cause: javax.faces.el.EvaluationException:javax.faces.application.ViewExpiredException root cause:javax.faces.application.ViewExpiredException Next thing i tried was to write ExceptionHandlerFactory and a CustomExceptionHandler, as described in JavaServerFaces 2.0 - The Complete Reference. So i inserted the following tag into faces-config.xml: <factory> <exception-handler-factory> exceptions.ExceptionHandlerFactory </exception-handler-factory> </factory> And added these classes: The factory: package exceptions; import javax.faces.context.ExceptionHandler; public class ExceptionHandlerFactory extends javax.faces.context.ExceptionHandlerFactory { private javax.faces.context.ExceptionHandlerFactory parent; public ExceptionHandlerFactory(javax.faces.context.ExceptionHandlerFactory parent) { this.parent = parent; } @Override public ExceptionHandler getExceptionHandler() { ExceptionHandler result = parent.getExceptionHandler(); result = new CustomExceptionHandler(result); return result; } } The custom exception handler: package exceptions; import java.util.Iterator; import javax.faces.FacesException; import javax.faces.application.NavigationHandler; import javax.faces.application.ViewExpiredException; import javax.faces.context.ExceptionHandler; import javax.faces.context.ExceptionHandlerWrapper; import javax.faces.context.FacesContext; import javax.faces.event.ExceptionQueuedEvent; import javax.faces.event.ExceptionQueuedEventContext; class CustomExceptionHandler extends ExceptionHandlerWrapper { private ExceptionHandler parent; public CustomExceptionHandler(ExceptionHandler parent) { this.parent = parent; } @Override public ExceptionHandler getWrapped() { return this.parent; } @Override public void handle() throws FacesException { for (Iterator<ExceptionQueuedEvent> i = getUnhandledExceptionQueuedEvents().iterator(); i.hasNext();) { ExceptionQueuedEvent event = i.next(); System.out.println("Iterating over ExceptionQueuedEvents. Current:" + event.toString()); ExceptionQueuedEventContext context = (ExceptionQueuedEventContext) event.getSource(); Throwable t = context.getException(); if (t instanceof ViewExpiredException) { ViewExpiredException vee = (ViewExpiredException) t; FacesContext fc = FacesContext.getCurrentInstance(); NavigationHandler nav = fc.getApplication().getNavigationHandler(); try { // Push some useful stuff to the flash scope for // use in the page fc.getExternalContext().getFlash().put("expiredViewId", vee.getViewId()); nav.handleNavigation(fc, null, "/login?faces-redirect=true"); fc.renderResponse(); } finally { i.remove(); } } } // At this point, the queue will not contain any ViewExpiredEvents. // Therefore, let the parent handle them. getWrapped().handle(); } } But STILL i'm NOT redirected to my error page - i'm getting the same HTTP 500 error like above. What am i doing wrong, what could be missing in my implementation so that the exception is handled correctly?

    Read the article

  • terminating java applet thread on page unload

    - by Hammad Tariq
    Hello, I have got a problem here in terminating the threads. The problem is that I am using applet thread to access JS DOM and manipulate innerHTML of a span to right the Thread Name as the innerHTML. It works fine until I keep refreshing the page but if I dont give it a sleep of like 200ms and go to another page which dont have any applet on it, it will give me an error in firebug console: document.getElementById("userName") is null What I am suspecting is, although I send an interrupt on stop and I have also tried the same by setting a flag variable of running in run while loop, the thread executes much faster than the time JVM takes to unload it and I get my page changed in browser but applet is still trying to find an element with id userName. Is that true? Is there any work around of it? Is there any way to know how many threads are running at the moment? Is there any kill all command to send on destroy()? I have searched a lot, seen all the API of java threads and applets, couldn't get this to work. Below is the code: import java.applet.Applet; import netscape.javascript.*; //No need to extend JApplet, since we don't add any components; //we just paint. public class firstApplet extends Applet { /** * */ private static final long serialVersionUID = 1L; firstThread first; boolean running = false; public class firstThread extends Thread{ JSObject win; JSObject doc; firstThread second; public firstThread(JSObject window){ this.win = window; } public void run() { try{ System.out.println("running... "); while (!isInterrupted()){ doc = (JSObject) win.getMember("document"); String userName = Thread.currentThread().getName(); //String userName = "John Doe"; String S = "document.getElementById(\"userName\").innerHTML = \""+userName+"\";"; doc.eval(S); Thread.sleep(5); } }catch(Exception e){ System.out.println("exception in first thread... "); e.printStackTrace(); } } } public void init() { System.out.println("initializing... "); } public void start() { System.out.println("starting... "); JSObject window = JSObject.getWindow(this); first = new firstThread(window); first.start(); running = true; } public void stop() { first.interrupt(); first = null; System.out.println("stopping... "); } public void destroy() { if(first != null){ first = null; } System.out.println("preparing for unloading..."); } } Thanks

    Read the article

  • US Bank Routing Number and BIC/SWIFT

    - by Konerak
    I know it is a bit offtopic, but I've been having a hard time finding more information to this question, and since this site is visited by a lot of people from the United States, you guys might know/find the answer more easily. Banks in europe each have a SWIFT Number, while US Banks use Routing Numbers. This leads to following questions: Does each bank in the US also carry a BIC number? (SWIFT) Is there a 1-1 relationship between BIC/SWIFT and Routing Numbers? Is there a list of these numbers somewhere? Background information: We're adding international payments to our bookkeeping application. Users can add international suppliers, but my boss prefered not to change the current supplier table but to have the ROUTING NUMBER in another table, with as PK the BIC. I'm wondering if BIC is a valid choice, or if it should just be BANK ACCOUNT NUMBER.

    Read the article

  • Self referencing symmetrical Hibernate Map Table using @ManyToMany

    - by sammichy
    I have the following class public class ElementBean { private String link; private Set<ElementBean> connections; } I need to create a map table where elements are mapped to each other in a many-to-many symmetrical relationship. @ManyToMany(targetEntity=ElementBean.class) @JoinTable( name="element_elements", joinColumns=@JoinColumn(name="FROM_ELEMENT_ID", nullable=false), inverseJoinColumns=@JoinColumn(name="TO_ELEMENT_ID", nullable=false) ) public Set<ElementBean> getConnections() { return connections; } I have the following requirements When element A is added as a connection to Element B, then element B should become a connection of Element A. So A.getConnections() should return B and B.getConnections() should return A. I do not want to explicitly create 2 records one for mapping A to B and another for B to A. Is this possible?

    Read the article

  • Sumproduct using Django's aggregation

    - by Matthew Rankin
    Question Is it possible using Django's aggregation capabilities to calculate a sumproduct? Background I am modeling an invoice, which can contain multiple items. The many-to-many relationship between the Invoice and Item models is handled through the InvoiceItem intermediary table. The total amount of the invoice—amount_invoiced—is calculated by summing the product of unit_price and quantity for each item on a given invoice. Below is the code that I'm currently using to accomplish this, but I was wondering if there is a better way to handle this using Django's aggregation capabilities. Current Code class Item(models.Model): item_num = models.SlugField(unique=True) description = models.CharField(blank=True, max_length=100) class InvoiceItem(models.Model): item = models.ForeignKey(Item) invoice = models.ForeignKey('Invoice') unit_price = models.DecimalField(max_digits=10, decimal_places=2) quantity = models.DecimalField(max_digits=10, decimal_places=4) class Invoice(models.Model): invoice_num = models.SlugField(max_length=25) invoice_items = models.ManyToManyField(Item,through='InvoiceItem') def _get_amount_invoiced(self): invoice_items = self.invoiceitem_set.all() amount_invoiced = 0 for invoice_item in invoice_items: amount_invoiced += (invoice_item.unit_price * invoice_item.quantity) return amount_invoiced amount_invoiced = property(_get_amount_invoiced)

    Read the article

< Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >