Search Results

Search found 9617 results on 385 pages for 'fresh dev'.

Page 104/385 | < Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >

  • Dell PowerEdge R720 - Corrupted RAID

    - by BT643
    Apologies in advance for the lengthy question. We have a Dell PowerEdge R720 server with: 2 x 136GB SAS drives in RAID 1 for the OS (Ubuntu Server 12.04) 6 x 3TB SATA drives in RAID 5 for data A few days ago we were getting errors when trying to access files on the large RAID 5 partition. We rebooted the server and got a message about the raid controller has found a foriegn config. We've had this before, and just needed to use Dell's RAID configuration utility to import foreign config on the RAID. Last time this worked, but this time, it started doing a disk check then we got this: FSCK has returned the following: "/dev/sdb1 inode 364738 has a bad extended attribute block 7 /dev/sdb1 unexpected inconsistency run fsck manually (i.e without -a or -p options) MOUNTALL fsck /ourdatapartition [1019] terminated with status 4 MOUNTALL filesystem has errors /ourdatapartition errors where found while checking the disk drive for /ourdatapartition Press F to fix errors, I to Ignore or M for Manual Recovery" We pressed F to try and fix the errors, but it eventually errored with: Inode 275841084, i_blocks is 167080, should be 0. Fix? yes Inode 275841141 has an invalid extend node (blk 2206761006, lblk 0) Clear? yes Inode 275841141, i_blocks is 227872, should be 0. Fix? yes Inode 275842303 has an invalid extend node (blk 2206760975, lblk 0) Clear? yes .... Error storing directory block information (inode=275906766, block=0, num=2699516178): Memory allocation failed /dev/sdb1: ***** FILE SYSTEM WAS MODIFIED ***** e2fsck: aborted /dev/sdb1: ***** FILE SYSTEM WAS MODIFIED ***** mountall: fsck /ourdatapartition [1286] terminated with status 9 mountall: Unrecoverable fsck error: /ourdatapartition We noticed one of the drive lights was not lit at all, and thought this may have failed and be the problem. We replaced the drive with a spare, and tried "F" to repair it again, but we keep just getting the same error as above. In the RAID configuration utility, all drives show as "online" and "optimal". We do have this data on another replicated server, so we're not worried about "recovering" anything, we just want to get the system back online asap. The server has 64 or 32GB memory, can't remember off the top of my head, but either way, with a 14TB RAID, I think it may still not be enough. Thanks EDIT - I checked the memory usage while fsck was running as suggested and after 2 or 3 minutes, it looked like this, using up nearly all of our servers memory: When it failed after 5 minutes or so with the error in my post, the memory immediately freed up again:

    Read the article

  • Why is Windows 7 announcing itself as an IPv6 router?

    - by Paul
    I have a 6in4 ipv6 connection from a linux box to a broker. I use gogoc to establish the connection to the broker, and radvd to advertise the route to clients on the network. All this appears to work, the problem is that I have a Windows 7 machine on the same network, and it is advertising itself as a ipv6 router. Which it is not. This is output from radvdump: # # radvd configuration generated by radvdump 1.8.5 # based on Router Advertisement from [snip]:ea2 # received by interface eth0 # interface eth0 { AdvSendAdvert on; # Note: {Min,Max}RtrAdvInterval cannot be obtained with radvdump AdvManagedFlag on; AdvOtherConfigFlag on; AdvReachableTime 0; AdvRetransTimer 0; AdvCurHopLimit 0; AdvDefaultLifetime 1800; AdvHomeAgentFlag off; AdvDefaultPreference medium; AdvSourceLLAddress on; AdvLinkMTU 1500; }; # End of interface definition # # radvd configuration generated by radvdump 1.8.5 # based on Router Advertisement from [snip]:1121 # received by interface eth0 # interface eth0 { AdvSendAdvert on; # Note: {Min,Max}RtrAdvInterval cannot be obtained with radvdump AdvManagedFlag off; AdvOtherConfigFlag off; AdvReachableTime 0; AdvRetransTimer 0; AdvCurHopLimit 64; AdvDefaultLifetime 1800; AdvHomeAgentFlag off; AdvDefaultPreference medium; AdvLinkMTU 1280; AdvSourceLLAddress on; prefix [snip]::/64 { AdvValidLifetime 86400; AdvPreferredLifetime 14400; AdvOnLink on; AdvAutonomous on; AdvRouterAddr off; }; # End of prefix definition }; # End of interface definition And I end up with two routes: $ ip -6 route [snip]::/64 dev eth0 proto kernel metric 256 expires 86117sec fe80::/64 dev eth0 proto kernel metric 256 default via [snip]:ea2 dev eth0 proto kernel metric 1024 expires 1492sec default via [snip]:1121 dev eth0 proto kernel metric 1024 expires 1506sec The ea2 route is to the Windows7 box. It doesn't have a router installed, and doesn't have any tun/tap interfaces. I can't see why it is doing this. I could disable ipv6 on it, but I want it to be a client, not a router. Update: The IP Helper service (Provides tunnel connectivity using IPv6 transition technologies (6to4, ISATAP, Port Proxy, and Teredo), and IP-HTTPS. If this service is stopped, the computer will not have the enhanced connectivity benefits that these technologies offer.) seems to be the culprit, as if it is stopped, I don't get the routes advertised. So my question is now more specifically "why is IP Helper announcing routes?".

    Read the article

  • How do I change the quickix title (status bar) in vim?

    - by romeovs
    I'm have the following makeprg to compile my tex files in vim: setlocal makeprg=pdflatex\ \-file\-line\-error\ \-shell\-escape\ \-interaction=nonstopmode\ $*\\\|\ tee\ \/dev\/tty\ \\\|\ grep\ \-P\ ':\\d{1,5}:\ ' which gives me good results (errors displayed properly, tex compilation shown while busy,...) Yet there is one thing I'm not pleased off: when there are errors and the quickfix window pops up, its status bar is cluttered up with the makeprg string: pdflatex\ \-file\-line\-error\ \-shell\-escape\ \-interaction=nonstopmode\ $*\\\|\ tee\ \/dev\/tty\ \\\|\ grep\ \-P\ ':\\d{1,5}:\ ' Is there a way of changing the quickfix title/statusbar?

    Read the article

  • How to install GIT on an offline RHEL?

    - by Stijn Vanpoucke
    I'm using the following commands from the manual to install GIT $ tar -zxf git-1.7.2.2.tar.gz $ cd git-1.7.2.2 $ make prefix=/usr/local all $ sudo make prefix=/usr/local install but I'm receiving the following exceptions ... cache.h: At top level: cache.h:746: error: expected declaration specifiers or â...â before âtime_tâ cache.h:889: warning: âstruct timevalâ declared inside parameter list cache.h:895: warning: âstruct timevalâ declared inside parameter list cache.h:970: error: expected specifier-qualifier-list before âoff_tâ cache.h:979: error: expected specifier-qualifier-list before âoff_tâ cache.h:997: error: expected specifier-qualifier-list before âoff_tâ cache.h:1057: error: expected declaration specifiers or â...â before âoff_tâ cache.h:1063: error: expected declaration specifiers or â...â before âuint32_tâ cache.h:1064: error: expected â=â, â,â, â;â, âasmâ or â__attribute__â before ânt h_packed_object_offsetâ cache.h:1065: error: expected â=â, â,â, â;â, âasmâ or â__attribute__â before âfi nd_pack_entry_oneâ cache.h:1067: error: expected declaration specifiers or â...â before âoff_tâ cache.h:1069: error: expected declaration specifiers or â...â before âoff_tâ cache.h:1070: error: expected declaration specifiers or â...â before âoff_tâ cache.h:1094: error: expected specifier-qualifier-list before âoff_tâ cache.h:1168: error: expected â)â before â*â token cache.h:1177: error: expected â=â, â,â, â;â, âasmâ or â__attribute__â before âre ad_in_fullâ cache.h:1178: error: expected â=â, â,â, â;â, âasmâ or â__attribute__â before âwr ite_in_fullâ cache.h:1179: error: expected â=â, â,â, â;â, âasmâ or â__attribute__â before âwr ite_str_in_fullâ cache.h:1252: error: expected declaration specifiers or â...â before âFILEâ In file included from credential-store.c:2: credential.h:28: error: expected declaration specifiers or â...â before âFILEâ credential.h:29: error: expected declaration specifiers or â...â before âFILEâ In file included from credential-store.c:4: parse-options.h:115: error: expected specifier-qualifier-list before âintptr_tâ credential-store.c: In function âparse_credential_fileâ: credential-store.c:13: error: âFILEâ undeclared (first use in this function) credential-store.c:13: error: âfhâ undeclared (first use in this function) credential-store.c:17: warning: implicit declaration of function âfopenâ credential-store.c:19: error: âerrnoâ undeclared (first use in this function) credential-store.c:19: error: âENOENTâ undeclared (first use in this function) credential-store.c:24: error: too many arguments to function âstrbuf_getlineâ credential-store.c:24: error: âEOFâ undeclared (first use in this function) credential-store.c:39: warning: implicit declaration of function âfcloseâ credential-store.c: In function âprint_entryâ: credential-store.c:44: warning: implicit declaration of function âprintfâ credential-store.c:44: warning: incompatible implicit declaration of built-in fu nction âprintfâ credential-store.c: In function âmainâ: credential-store.c:132: warning: implicit declaration of function âumaskâ credential-store.c:144: error: âstdinâ undeclared (first use in this function) credential-store.c:144: error: too many arguments to function âcredential_readâ credential-store.c:147: warning: implicit declaration of function âstrcmpâ Is this because I didn't install the dependencies? apt-get install libcurl4-gnutls-dev libexpat1-dev gettext libz-dev libssl-dev How do I install them offline?

    Read the article

  • Failed to start up after upgrading software in ubuntu 10.10

    - by Landy
    I've been running Ubuntu 10.10 in a physical x86-64 machine. Today Update Manager reminded me that there are some updates to install and I confirmed the action. I should had read the update list but I didn't. I can only remember there is an update about cups. After the upgrading, Update Manager requires a restart and I confirmed too. But after the restart, the computer can't start up. There are errors in the console. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. [xxx]usb 1-8: new high speed USB device using ehci_hcd and address 3 [xxx]usb 2-1: new full speed USB device using ohci_hcd and address 2 [xxx]hub 2-1:1.0: USB hub found [xxx]hub 2-1:1.0: 4 ports detected [xxx]usb 2-1.1: new low speed USB device using ohci_hcd and address 3 Gave up waiting for root device. Common probles: - Boot args (cat /proc/cmdline) - Check rootdelay=(did the system wait long enough) - Check root= (did the system wait for the right device?) - Missing modules (cat /proc/modules; ls /dev) FATAL: Could not load /lib/modules/2.6.35-22-generic/modules.dep: No such file or directory FATAL: Could not load /lib/modules/2.6.35-22-generic/modules.dep: No such file or directory ALERT! /dev/sda1 does not exist. Dropping to a shell! BusyBox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell(ash) Enter 'help' for a list of built-in commands. (initramfs)[cursor is here] At the moment, I can't input anything in the console. The keyboard doesn't work at all. What's wrong? How can I check boot args or "root=" as suggested? How can I fix this issue? Thanks. =============== PS1: the /dev/sda1 is type ext4 (rw,nosuid,nodev) PS2: the /dev/sda1 can be mounted and accessed successfully under SUSE 11 SP1 x64.

    Read the article

  • How do I restore the default applets to Gnome's notification area?

    - by gbacon
    I have a fresh install of Karmic Koala. In a botched attempt at trying to change my default window manager, I somehow removed at least three applets from the notification area: network manager (nm-applet), volume control (gnome-volume-control-applet), and the battery meter (???). Now if I logout and back in, these applets don't run, but I can start them from the command line. Because it's a fresh install, I completely removed my luser account and home directory. After recreating my account, I was frustrated to find that the applets are still missing and no obvious way to add them back. How can I restore the default configuration?

    Read the article

  • tmpfs changes size on restart

    - by ben
    I have a tmpfs mount defined in my /etc/fstab with a size of 1024m, but when I restart the server it sizes itself to 5.9G. If I run mount -o remount /dev/shm, the size will correct itself to 1G. But it'll revert the next time the server is restarted. The entry in fstab is: tmpfs /dev/shm tmpfs size=1024m 0 0 Could there another file that mount could be calling during startup? How might I find that file?

    Read the article

  • Is it a very bad idea to create disk image of mounted disk?

    - by Maciek Sawicki
    I would like to backup my server. For example using dd: dd if=/dev/md0 of=/some_network_share I wonder if this image will be vary inconsistent if /dev/md0 is mounted? Would it be possible to convert such dd image to vdi drive and create working virtual machine? Using this command for example: VBoxManage convertfromraw ImageFile.dd OutputFile.vdi Network traffic is disabled on firewall (there is only connection to/from one remote machine where image is copied).

    Read the article

  • How to create NTFS partition in Linux to install Windows 7 from USB?

    - by Michal Stefanow
    I messed up with my computer and need help. Generally: install Windows 7 from USB. Problem: "setup was unable to create a new system partition" When first attempt to install Windows 7 failed I tried Linux live USB, installed distro to HDD, and erased all the existing partitions. Current state (fdisk -l): [writing from other computer so no copy and paste] /dev/sda1 305GB Linux /dev/sda2 7GB Extended /dev/sda5 7GB Linux Swam / Solaris To create a new, NTFS partition: fdisk /dev/sda n (for new) p (for primary) 3 (for partintion number) "No free sectors available" All the HDD was formatted couple of minutes before so there is a lot of free space but how to resize a parition? I cannot find an option for resizing in man fdisk. Some people say I should use gparted but my distro doesn't not contain this package. And my distro doesn't support wireless drivers so I have serious problems with downloading stuff. I tried also using cfdisk but any command results in: "cfdisk bad primary partition 1 partition ends in the final partial cylinder" I tried also removing partition 1 and then creating a new one (so there is no "no free sectors"). I'm receiving a warning: "Re-reading the partition table failed with error 16: Device or resource busy. The kernel still uses the old table. The new table will be used at the next reboot." After restating: "grub rescue, no known filesystem" It may indicate that some changes have been made BUT when running Windows 7 installed some another error: "Windows cannot be installed to Disk 0 Partition 1" More detailed: "Windows cannot be installed to this hard disk space. Windows must be installed to a partition formatted as NTFS." So formatting drive using Windows 7 installer BUT this time yet another error: "Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information" Apparently I cannot access logs (how?) and I am back to drawing board with my live USB (this time showing partition as HPFS/NTFS). Any suggestions how to install Windows 7? Should I reinstall Linux to HDD, erase existing partitions once again, and use Parted rather than gparted (parted is included in the distro). Or maybe should I create another bootable USB such as PartedMagic to painlessly create partitions? I just want to install Windows 7 from USB, my laptop is semi-operational and I am ready to receive some help regarding fdisk and creating NTFS partitions. UPDATE: I did as suggested (removed all the partitions) and tried to install in unallocated space. Tried to create a new partition and format it. Same error: "setup was unable to create a new system partition" Came to the conclusion it may have something to do with TrueCrypt I have recently installed. Right now trying to FIX MBR (as I haven't got possibility to create rescue disc without optical drive)

    Read the article

  • In your ssh config is it possible to have one host entry for multiple machines on the same domain

    - by Joshua Olson
    I'd like to be able to do something like Host * HostName *.mydomain.com ... So I can type something like ssh test ssh ci ssh dev Instead of having to type ssh test.mydomain.com ssh ci.mydomain.com ssh dev.mydomain.com Right now I have separate entries for each one, but we have dozens of machines, so I'd rather have a default rather than have to duplicate everything so many times.

    Read the article

  • Secure Browsing, how [closed]

    - by Jhonny Bigodes
    Possible Duplicate: How to browse safely? What's the best way to browse "suspicious" sites safely. I know Firefox used to be "the thing", but now I don't think it is (IMHO). What I'm using now is a virtual machine (with virtual box), rhat I periodically format. I heard some time ago of a project that glued the 2 together (kinda... everytime you startup the program it used a fresh machine with a fresh browser), but I lost track of them So my question is: How can I Browse the web securely ? Ps.: In in ubuntu

    Read the article

  • Grub Setup(hd0) Error Cannot mount selected partition

    - by MA1
    I have created a NTFS Partition(/dev/sda3) and copy the grub files in it in the following path: /dev/sda3/boot/grub/ then tried to install the grub by using following commands: grub root (hd0,2) Filesystem unknown, partition type 0x7 grub setup (hd0) Error : cannot mount selected partition The partition is present and i created it with gparted. i also tried the following command: find (hd0,2)/boot/grub/stage1 Error 15: File not found All the files were there as copied them. So, where is the problem and what i am doing wrong?

    Read the article

  • Very slow Windows 7 on Thinkpad T61

    - by bogdanf
    I have a very strange problem with my fresh install of Windows 7 Profesional, 64bits on my Lenovo Thinkpad T61 : The overal performance is very slow, the disk is constantly spinning, even without any program running (after boot, no other programs installed). The boot process is very slow itself (4-5 minutes). I mention that the laptop was fine on XP until the upgrade. Thanks ! Additional info (as requested by the comments) : 2GB RAM Yes, I added all the manufacturer (Lenovo) drivers and updates (using the utility provided by Lenovo) Tried with both 32 and 64 bits editions. The 32 bits one is performing a little better, but not very usable either. The hdd has enough space (20 GB or so) The problem is still present on a fresh install, so no recycle bin emptying or unistall programs (there aren't any except plain 7) would help. I'm not a newbie, so no obvious causes are left unchecked

    Read the article

  • How to backup metro "app" data, manually

    - by ihateapps
    I'm a PC tech and I have been getting more and more Windows 8 issues. First off I hate metro, and secondly I hate "apps". I like to do fresh installs of Windows8. I backup my user's data and then fresh install. Assuming there is no recovery partition how can I manually backup the user's app data so that in the event of a reformat I simply redownload their apps (dumb, I wish there was a way to actually back them up too) and plop the data back in. Do most normal people even use "apps", or do they use Windows8 like a desktop OS? I totally dropped metro with ClassicShell.

    Read the article

  • Rails 2 and Ngnix: https pages can't load css or js (but will load graphics)

    - by Max Williams
    ADMISSION: i've posted this same question on stackoverflow, before realising it's probabaly better suited to superuser, but it kind of depends on the answer: If it turns out to be a problem in my nginx config, it's definitely superuser. If it turns out to be a problem in my Rails config (or code) then it's arguably stackoverflow. I'm adding some https pages to my rails site. In order to test it locally, i'm running my site under one mongrel_rails instance (on 3000) and nginx. I've managed to get my nginx config to the point where i can actually go to the https pages, and they load. Except, the javascript and css files all fail to load: looking in the Network tab in chrome web tools, i can see that it is trying to load them via an https url. Eg, one of the non-working file urls is https://cmw-local.co.uk/stylesheets/cmw-logged-out.css?1383759216 I have these set up (or at least think i do) in my nginx config to redirect to the http versions of the static files. This seems to be working for graphics, but not for css and js files. If i click on this in the Network tab, it takes me to the above url, which redirects to the http version. So, the redirect seems to be working in some sense, but not when they're loaded by an https page. Like i say, i thought i had this covered in the second try_files directive in my config below, but maybe not. Can anyone see what i'm doing wrong? thanks, Max Here's my nginx config - sorry it's a bit lengthy! I think the error is likely to be in the first (ssl) server block: server { listen 443 ssl; keepalive_timeout 70; ssl_certificate /home/max/work/charanga/elearn_container/elearn/config/nginx/certs/max-local-server.crt; ssl_certificate_key /home/max/work/charanga/elearn_container/elearn/config/nginx/certs/max-local-server.key; ssl_session_cache shared:SSL:10m; ssl_session_timeout 10m; ssl_protocols SSLv3 TLSv1; ssl_ciphers RC4:HIGH:!aNULL:!MD5; ssl_prefer_server_ciphers on; server_name elearning.dev cmw-dev.co.uk cmw-dev.com cmw-nginx.co.uk cmw-local.co.uk; root /home/max/work/charanga/elearn_container/elearn; # ensure that we serve css, js, other statics when requested # as SSL, but if the files don't exist (i.e. any non /basket controller) # then redirect to the non-https version location / { try_files $uri @non-ssl-redirect; } # securely serve everything under /basket (/basket/checkout etc) # we need general too, because of the email/username checking location ~ ^/(basket|general|cmw/account/check_username_availability) { # make sure cached copies are revalidated once they're stale add_header Cache-Control "public, must-revalidate, proxy-revalidate"; # this serves Rails static files that exist without running # other rewrite tests try_files $uri @rails-ssl; expires 1h; } location @non-ssl-redirect { return 301 http://$host$request_uri; } location @rails-ssl { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; proxy_read_timeout 180; proxy_next_upstream off; proxy_pass http://127.0.0.1:3000; expires 0d; } } #upstream elrs { # server 127.0.0.1:3000; #} server { listen 80; server_name elearning.dev cmw-dev.co.uk cmw-dev.com cmw-nginx.co.uk cmw-local.co.uk; root /home/max/work/charanga/elearn_container/elearn; access_log /home/max/work/charanga/elearn_container/elearn/log/access.log; error_log /home/max/work/charanga/elearn_container/elearn/log/error.log debug; client_max_body_size 50M; index index.html index.htm; # gzip html, css & javascript, but don't gzip javascript for pre-SP2 MSIE6 (i.e. those *without* SV1 in their user-agent string) gzip on; gzip_http_version 1.1; gzip_vary on; gzip_comp_level 6; gzip_proxied any; gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript; #text/html # make sure gzip does not lose large gzipped js or css files # see http://blog.leetsoft.com/2007/7/25/nginx-gzip-ssl gzip_buffers 16 8k; # Disable gzip for certain browsers. #gzip_disable "MSIE [1-6].(?!.*SV1)"; gzip_disable "MSIE [1-6]"; # blank gif like it's 1995 location = /images/blank.gif { empty_gif; } # don't serve files beginning with dots location ~ /\. { access_log off; log_not_found off; deny all; } # we don't care if these are missing location = /robots.txt { log_not_found off; } location = /favicon.ico { log_not_found off; } location ~ affiliate.xml { log_not_found off; } location ~ copyright.xml { log_not_found off; } # convert urls with multiple slashes to a single / if ($request ~ /+ ) { rewrite ^(/)+(.*) /$2 break; } # X-Accel-Redirect # Don't tie up mongrels with serving the lesson zips or exes, let Nginx do it instead location /zips { internal; root /var/www/apps/e_learning_resource/shared/assets; } location /tmp { internal; root /; } location /mnt{ root /; } # resource library thumbnails should be served as usual location ~ ^/resource_library/.*/*thumbnail.jpg$ { if (!-f $request_filename) { rewrite ^(.*)$ /images/no-thumb.png break; } expires 1m; } # don't make Rails generate the dynamic routes to the dcr and swf, we'll do it here location ~ "lesson viewer.dcr" { rewrite ^(.*)$ "/assets/players/lesson viewer.dcr" break; } # we need this rule so we don't serve the older lessonviewer when the rule below is matched location = /assets/players/virgin_lesson_viewer/_cha5513/lessonViewer.swf { rewrite ^(.*)$ /assets/players/virgin_lesson_viewer/_cha5513/lessonViewer.swf break; } location ~ v6lessonViewer.swf { rewrite ^(.*)$ /assets/players/v6lessonViewer.swf break; } location ~ lessonViewer.swf { rewrite ^(.*)$ /assets/players/lessonViewer.swf break; } location ~ lgn111.dat { empty_gif; } # try to get autocomplete school names from memcache first, then # fallback to rails when we can't location /schools/autocomplete { set $memcached_key $uri?q=$arg_q; memcached_pass 127.0.0.1:11211; default_type text/html; error_page 404 =200 @rails; # 404 not really! Hand off to rails } location / { # make sure cached copies are revalidated once they're stale add_header Cache-Control "public, must-revalidate, proxy-revalidate"; # this serves Rails static files that exist without running other rewrite tests try_files $uri @rails; expires 1h; } location @rails { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; proxy_read_timeout 180; proxy_next_upstream off; proxy_pass http://127.0.0.1:3000; expires 0d; } }

    Read the article

  • System Center 2012 Service Manager change request status stuck at new

    - by Chuck Herrington
    The guy that built and setup this system left rather abruptly and I've taken over. My current issues are I have several change requests that are stuck at New. They do not move to Pending or In Progress. The system is not sending emails when incidents are getting assigned to people. This used to work on this system. I have done a lot of searching and the usual solution to this of stopping and restarting the system center services does not help. Can anyone give me any ideas of where else to look? Update: From all the searching I have done it seemed like I was at the point of re-installing. My initial installation of SCSM 2012 was on a machine that was upgraded from SCSM 2010 and also hosted SCCM 2007 and WSUS. We decided to give it a fresh start on a new server by installing a second instance of the SCSM server on a brand new 2008 R2 server then promoting the new server to the workflow master using the procedures outlined in this article - Dealing with Multiple management Servers. I've gotten to the point where we have both the old and the new server up and the new server has been promoted. I had hopped to get spammed by emails all the sudden due to the workflow taking off, but no such luck. Once all the clients are reconfigured to point to the new server we still plan to decommission the old server but at this point it seems to be that the problem is in the database. Short of any other input from the community, my next plan is to install a 180 day trial on a test server, complete with a separate database so that I can do a side by side comparison between a completely fresh install and what I have now and see if I can find any differences. While that install is running I also plan on investigating the event logs to see if there is anything in there that can shed some light on what is happening on the new server. Update 2: So I've now got a test SCSM server up with a completely fresh install including Database and it seems to be able to transition Change Requests from New to In Progress. I'm attempting to find differences between the two. Stay Tuned! Update 3: In looking through the event log on the new SCSM machine i discovered: Log Name: Operations Manager Source: OpsMgr Root Connector Date: 10/9/2013 3:48:18 PM Event ID: 28000 Task Category: None Level: Warning Keywords: Classic User: N/A Computer: scsm02 Description: The Root connector received an exception from the SDK Service while submitting task status: Cannot set availability on a health service that doesn't exist. This lead me to Event ID 2800 logged after installing secondary server for System Center 2012 Service Manager SP1. I contacted MS to obtain the hotfix, BIG warning here, turns out the hotfix is not so "hot". In order to apply this hotfix, you have to uninstall then reinstall using the files they supply. :( This is where I am at now ... Update 4: Not much luck after the re-install. The errors in the event log have gone away on the new server but the workflows still aren't running and neither the event log nor the workflow status screen seem to indicate why. I've done a comparison of the Activity and the Change Request Event Workflows and I've removed everything from the production system that is not in my fresh test system (which is everything), shut down the services, cleared out the cache folders and restarted the services and still no joy. At the moment the only thing I can think to do is either a)nuke the entire system including the database and start over, losing all of our data in the process or b)contact MS (which is probably going to cost us a butt load of money and time in the end to only advise us to do the same thing. Maybe more idea's will come after coffee ... No answers came after coffee. Attempting to contact MS. Managed to get to their first line of defense, gave them our SA number and someone is supposed to call me back. I am trying to log into my incident on their site to update my ticket with the link to this thread but when i click on the link in the email they sent me it goes to a "Sorry, the page you requested is not available" page ... Linux is looking better and better all the time.

    Read the article

  • linux multipath routing load balance

    - by user52883
    I would like to know how to load balance two Business DLS links which have fixed IPs. I believe it would look something like this: ip route add default scope global \ nexthop via gatewayDLS1 dev interface1 weight 1 \ nexthop via gatewayDLS2 dev interface2 weight 1 Is this be all I need in order to get multipath routing? Please, give me a more detailed answer if possible, thanks you.

    Read the article

  • grep + sed for find & replace fun!

    - by Jim Greenleaf
    I have a dev copy of a website set up that has quite a few hardcoded references to its live counterpart. I would like to replace all occurrences of "www." with "dev." in all files. I think I can use a combination of grep + sed, but I'm not sure how.

    Read the article

  • LVM Extend... not sure the filesystem

    - by Dan
    I would like to extend my LVM partition. First I did lvextend -L +100G /dev/server/home Now I still have to extend the filesystem. The tutorials tell me to use resize2fs, but that only works for ext2 and ext3. I'm not even sure what filesystem I have... fdisk /dev/server/home/ doesn't work... how do I know what kind of filesystem I have on my lvm partition?

    Read the article

  • Google Chrome passphrase : where is it?

    - by danielson
    Every time I do a fresh install, Google Chrome asks me for my passphrase. Have searched high and low in Google's help forum and have yet to receive or find any form of response. When I do a fresh install, if I try to enter the passphrase (with all possible passwords i can recall) nothing works and I can't recover my extensions, bookmarks etc. On the other hand, if I wait a bit, everything falls to place. I close that window asking for passphrase and all my extensions, bookmarks are back. The failure to enter a proper passphrase code gets me a message to change my passphrase in my account settings. Who knows where that is! No one at Google's forum seems to know anything about this "passphrase".

    Read the article

  • How to mount a drive with read only permission

    - by Master
    I am using this is fstab to mount the partition at backup. /dev/sda5 /media/virtual ntfs defaults 0 0 When i reboot the permissions are automatically set to 777. I want that only one user i.e userA can read and write , all others should not see the contents of that drive. What should i do anything like /dev/sda5 /media/virtual ntfs userA 700 defaults 0 0

    Read the article

  • Changing 127.0.0.1:81 to Internal Domain Name ?

    - by Tom
    Hi, I was wondering the steps I can take to change the localhost name to a test development domain name like "website.dev" on Win7 x64 ? Currently, when my test website builds its assigned to 127.0.0.1:81 but I want this to instead have a name like "website.dev" that is accessible on my local network ? [and sure any Virtual PCs built on this local PC] I think this is done via the hosts file but I am little unsure how to do this ? Would someone be able to assist ? Thx

    Read the article

  • How to clone a USB flash drive using dd?

    - by MentalBlister
    Using 'dd' to clone a USB drive -cfdisk: resized the destination partition to be of same size made the partition bootable same 'type' ext3 ran 'mkfs.ext3' after exit cfdisk then dd if=dev/sda1 of=/dev/sdb1 result booting: Missing operating system. The source USB device boots on multiple laptops USB destination filesystem looks the same.... Any idears?

    Read the article

  • advise on pointing reporting service data sources

    - by pearcewg
    It's possible I am unable to resolve this because I have been spoiled in other DEV environments where I had one database server for each reporting server. I need some advise on how to point a single SQL Server reporting server to multiple database servers. These databases correspond to DEV, TEST and QA environments. The way the reporting is currently configured I am unable to toggle between environments gracefully. Any advise would be greatly appreciated.

    Read the article

  • Can you add preexisting storage pools in server 2012

    - by Justin
    I have been looking at Windows Server 2012's storage pools and it looks like an ideal solution for my home media center. One thing I couldn't find information on is adding a preexisting pool to a fresh server install. I ask this given the following situation: You install Windows Server 2012 and setup your storage pools You add disks over time to your pool A year later your drive with the operating system fails You replace the bad drive and reinstall server 2012. Now how do you add this preexisting storage pool full of data to your fresh install?

    Read the article

< Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >