Search Results

Search found 4708 results on 189 pages for 'hot deploy'.

Page 104/189 | < Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >

  • My First 5K, the recap.

    - by Chris Williams
    It was a nice day to be outside (and trust me, those aren't words you'll hear from me often.) I got to the site around 7:45, hit the pre-reg table and got my number along with a goody bag full of coupons for racing gear, a water bottle and a tshirt. Oh and a map. Stashed all that stuff in the jeep, emptied my pockets of everything but my iPhone and my jeep key, and proceeded to walk around for a bit as people started showing up and signing in. It was fairly breezy, and there was definitely a storm coming... but it was anyone's guess on when it would actually arrive. It was interesting to see everyone who was participating. If I had to guess, I would say the event was 60-70% women, with a pretty broad distribution of age... as young as 13 to well over 60 (in both genders.) I don't know exactly how many folks were there, but it was well over 300. Eventually it was time to kick things off, and everyone made their way to the start line. All of the 5k and 10k runners were mixed together, starting at the same time. All the walkers and the people with strollers or dogs were in the back. It was pretty chaotic at first, once things started, but it thinned out fairly quickly. The 10k people and the hardcore runners sped ahead of everyone else and the walkers gradually lagged behind. The 5K course was pretty nice, winding around a lake down in Eden Prairie. The 10K course overlapped most of ours, but branched off a couple times too. I didn't run the whole time, but I started the race running and I ended it running, and did a mix of walking and running along the way. I met my goals, which were a) don't ever stop and b) don't be last. The weather managed to hold out for the entire race. It never got too hot, there was a nice breeze and it was mostly overcast. Pretty much perfect in my book. About 20-30 minutes after I left, the rain came down pretty hard. I had a good time, and will most likely do more of them. We'll see.

    Read the article

  • COLLABORATE 13 Call for Papers

    - by Marc Weintraub
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Attention PeopleSoft customers!  Speak at the largest user-led PeopleSoft conference of the year and attend for free! Interested in submitting a presentation for COLLABORATE 13? October 12 is the deadline to submit your abstract. The COLLABORATE 13- Quest forum is your home for high-level education sessions around PeopleSoft. Presenting doesn’t just mean giving a solo lecture: you can present with a vendor, give a demonstration (internet will be provided), facilitate a hot topic discussion or even offer best practices from an experience your company has been through. Remember, to submit an abstract now, all you need is a short description of your presentation. Think you don't have a story to tell? Think again! Check out the COLLABORATE 13- Quest forum now to better understand what we are looking for. A selection committee of other PeopleSoft users will review all sessions and select the most relevant, customer-focused sessions possible to make COLLABORATE a great learning experience for everyone. Don't forget, one speaker from each session selected will be eligible to receive a complimentary registration to the entire event *some rules apply. Also, don’t forget to include your functional counterpart. The selection committee is looking to increase the amount of functional users attending and want to help them glean the most out of the event. Thank you for your time and please let the selection committee know if you have any questions about submitting a presentation. We look forward to seeing you at COLLABORATE 13 in Denver! Quest's COLLABORATE '13 website - http://www.questdirect.org/collaborate /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

  • Self-Executing Anonymous Function vs Prototype

    - by Robotsushi
    In Javascript there are a few clearly prominent techniques for create and manage classes/namespaces in javascript. I am curious what situations warrant using one technique vs. the other. I want to pick one and stick with it moving forward. I write enterprise code that is maintained and shared across multiple teams, and I want to know what is the best practice when writing maintainable javascript ? I tend to prefer Self-Executing Anonymous Functions however I am curious what the community vote is on these techniques. Prototype : function obj() { } obj.prototype.test = function() { alert('Hello?'); }; var obj2 = new obj(); obj2.test(); Self-Closing Anonymous Function : //Self-Executing Anonymous Function (function( skillet, $, undefined ) { //Private Property var isHot = true; //Public Property skillet.ingredient = "Bacon Strips"; //Public Method skillet.fry = function() { var oliveOil; addItem( "\t\n Butter \n\t" ); addItem( oliveOil ); console.log( "Frying " + skillet.ingredient ); }; //Private Method function addItem( item ) { if ( item !== undefined ) { console.log( "Adding " + $.trim(item) ); } } }( window.skillet = window.skillet || {}, jQuery )); //Public Properties console.log( skillet.ingredient ); //Bacon Strips //Public Methods skillet.fry(); //Adding Butter & Fraying Bacon Strips //Adding a Public Property skillet.quantity = "12"; console.log( skillet.quantity ); //12 //Adding New Functionality to the Skillet (function( skillet, $, undefined ) { //Private Property var amountOfGrease = "1 Cup"; //Public Method skillet.toString = function() { console.log( skillet.quantity + " " + skillet.ingredient + " & " + amountOfGrease + " of Grease" ); console.log( isHot ? "Hot" : "Cold" ); }; }( window.skillet = window.skillet || {}, jQuery )); //end of skillet definition try { //12 Bacon Strips & 1 Cup of Grease skillet.toString(); //Throws Exception } catch( e ) { console.log( e.message ); //isHot is not defined } I feel that I should mention that the Self-Executing Anonymous Function is the pattern used by the jQuery team. Update When I asked this question I didn't truly see the importance of what I was trying to understand. The real issue at hand is whether or not to use new to create instances of your objects or to use patterns which do not require constructors of the use of the new keyword. I added my own answer, because in my opinion we should make use of patterns which don't use the new keyword. For more information please see my answer.

    Read the article

  • Alert: It is No Longer 1982, So Why is CRM Still There?

    - by Mike Stiles
    Hot off the heels of Oracle’s recent LinkedIn integration announcement and Oracle Marketing Cloud Interact 2014, the Oracle Social Cloud is preparing for another big event, the CRM Evolution conference and exhibition in NYC. The role of social channels in customer engagement continues to grow, and social customer engagement will be a significant theme at the conference. According to Paul Greenberg, CRM Evolution Conference Chair, author, and Managing Principal at The 56 Group, social channels have become so pervasive that there is no longer a clear reason to make a distinction between “social CRM” and traditional CRM systems. Why not? Because social is a communication hub every bit as vital and used as the phone or email. What makes social different is that if you think of it as a phone, it’s a party line. That means customer interactions are far from secret, and social connections are listening in by the hundreds, hearing whether their friend is having a positive or negative experience with your brand. According to a Mention.com study, 76% of brand mentions are neutral, neither positive nor negative. These mentions fail to get much notice. So think what that means about the remaining 24% of mentions. They’re standing out, because a verdict, about you, is being rendered in them, usually with emotion. Suddenly, where the R of CRM has been lip service and somewhat expendable in the past, “relationship” takes on new meaning, seriousness, and urgency. Remarkably, legions of brands still approach CRM as if it were 1982. Today, brands must provide customer experiences the customer actually likes (how dare they expect such things). They must intimately know not only their customers, but each customer, because technology now makes personalized experiences possible. That’s why the Oracle Social Cloud has been so mission-oriented about seamlessly integrating social with sales, marketing and customer service interactions so the enterprise can have an actionable 360-degree view of the customer. It’s the key to that customer-centricity we hear so much about these days. If you’re attending CRM Evolution, Chris Moody, Director of Product Marketing for the Oracle Marketing Cloud, will show you how unified customer experiences and enhanced customer centricity will help you attract and keep ideal customers and brand advocates (“The Pursuit of Customer-Centricity” Aug 19 at 2:45p ET) And Meg Bear, Group Vice President for the Oracle Social Cloud, will sit on a panel talking about “terms of engagement” and the ways tech can now enhance your interactions with customers (Aug 20 at 10a ET). If you can’t be there, we’ll be doing our live-tweeting thing from the @oraclesocial handle, so make sure you’re a faithful follower. You’ll notice NOBODY is writing about the wisdom of “company-centricity.” Now is the time to bring your customer relationship management into the socially connected age. @mikestilesPhoto: Sue Pizarro, freeimages.com

    Read the article

  • Methodology to understanding JQuery plugin & API's developed by third parties

    - by Taoist
    I have a question about third party created JQuery plug ins and API's and the methodology for understanding them. Recently I downloaded the JQuery Masonry/Infinite scroll plug in and I couldn't figure out how to configure it based on the instructions. So I downloaded a fully developed demo, then manually deleted everything that wouldn't break the functionality. The code that was left allowed me to understand the plug in much greater detail than the documentation. I'm now having a similar issue with a plug in called JQuery knob. http://anthonyterrien.com/knob/ If you look at the JQuery Knob readme file it says this is working code: $(function() { $('.dial') .trigger( 'configure', { "min":10, "max":40, "fgColor":"#FF0000", "skin":"tron", "cursor":true } ); }); But as far as I can tell it isn't at all. The read me also says the Plug in uses Canvas. I am wondering if I am suppose to wrap this code in a canvas context or if this functionality is already part of the plug in. I know this kind of "question" might not fit in here but I'm a bit confused on the assumptions around reading these kinds of documentation and thought I would post the query regardless. Curious to see if this is due to my "newbi" programming experience or if this is something seasoned coders also fight with. Thank you. Edit In response to Tyanna's reply. I modified the code and it still doesn't work. I posted it below. I made sure that I checked the Google Console to insure the basics were taken care of, such as not getting a read-error on the library. <!DOCTYPE html> <meta charset="UTF-8"> <title>knob</title> <link rel="stylesheet" href="http://ajax.googleapis.com/ajax/libs/jqueryui/1.7.2/themes/hot-sneaks/jquery-ui.css" type="text/css" /> <script type="text/javascript" src="https://ajax.googleapis.com/ajax/libs/jquery/1.7.2/jquery.js" charset="utf-8"></script> <script src="https://ajax.googleapis.com/ajax/libs/jqueryui/1.8.21/jquery-ui.min.js"></script> <script src="js/jquery.knob.js"></script> <div id="button1">test </div> <script> $(function() { $("#button1").click(function () { $('.dial').trigger( 'configure', { "min":10, "max":40, "fgColor":"#FF0000", "skin":"tron", "cursor":true } ); }); }); </script>

    Read the article

  • JavaOne Session Report - Java ME SDK 3.2

    - by Janice J. Heiss
    Oracle Product Manager for Java ME SDK, Sungmoon Cho, presented a session, "Developing Java Mobile and Embedded Applications with Java ME SDK 3.2,” wherein he covered the basic new features of the Java ME Platform SDK 3.2, a state-of-the-art toolbox for developing mobile and embedded applications. The session began with a summary of the four main components of Java ME SDK. A device emulator allows developers to quickly run and test applications before commercialization. It supports CLDC/MIDP CLDC/IMP.NG and CLC/AGUI. A development environment assists writing, running debugging and deploying and enables on-device debugging. Samples provide developers with useful codes and frameworks. IDE Plugins – NetBeans and Eclipse – equip developers with CPU Profiler, Memory Monitor, Network Monitor, and Device Selector. This means that manual integration is no longer necessary. Cho then talked about the Java ME SDK’s on-device tooling architecture: * Java ME SDK provides an architecture ideal for on-device-debugging.* Device Manager plays the central role by managing different devices whether it is the emulator or a device that Oracle provides or recommends or a third party device as long as the devices have a Java Runtime that supports the protocol that is designated.* The Emulator provides an accurate emulation, since it uses the same code base used in Oracle’s Java ME runtime.* The Universal Emulator Interface (UEI) makes it easy for IDEs to detect the platform.He then focused on the Java ME SDK release highlights, which include: * Implementation and support for the new Oracle® Java Wireless Client 3.2 runtime and the Oracle® Java ME Embedded runtime. A full emulation for the runtime is provided.* Support for JSR 228, the Information Module Profile-Next Generation API (IMP-NG). This is a new profile for embedded devices. * A new Custom Device Skin Creator.* An Eclipse plugin for CLDC/MIDP.* Profiling, Network monitoring, and Memory monitoring are now integrated with the NetBeans profiling tools.* Java ME SDK Update CenterCho summarized the main features: IDE Integration (NetBeans and Eclipse) enables developers to write, run, profile, and debug their applications on their favorite IDE. CPU ProfilerThis enables developers to more quickly detect the hot spot and where CPU time is being used. They can double click the method to jump directly into the source code.Memory Monitor Developers can monitor objects and memory usage in real time.Debugger on the Emulator and DeviceDevelopers can run their applications step by step, and inspect the variables to pinpoint the problem. The debugging can take place either on the emulator or the device.Embedded Application DevelopmentIMP-NG, Device Access, Logging, and AMS API Support are now available.On-Device ToolingConnect your device to your computer, and run and debug the application right on your device.Custom Device Skin CreatorDefine your own device and test on an environment that is closest to your target device. The informative session concluded with a demo that showed more concretely how to apply the new features in Java ME SDK 3.2.

    Read the article

  • How do you conquer the challenge of designing for large screen real-estate?

    - by Berin Loritsch
    This question is a bit more subjective, but I'm hoping to get some new perspective. I'm so used to designing for a certain screen size (typically 1024x768) that I find that size to not be a problem. Expanding the size to 1280x1024 doesn't buy you enough screen real estate to make an appreciable difference, but will give me a little more breathing room. Basically, I just expand my "grid size" and the same basic design for the slightly smaller screen still works. However, in the last couple of projects my clients were all using 1080p (1920x1080) screens and they wanted solutions to use as much of that real estate as possible. 1920 pixels across provides just under twice the width I am used to, and the wide screen makes some of my old go to design approaches not to work as well. The problem I'm running into is that when presented with so much space, I'm confronted with some major problems. How many columns should I use? The wide format lends itself to a 3 column split with a 2:1:1 split (i.e. the content column bigger than the other two). However, if I go with three columns what do I do with that extra column? How do I make efficient use of the screen real estate? There's a temptation to put everything on the screen at once, but too much information actually makes the application harder to use. White space is important to help make sense of complex information, but too much makes related concepts look too separate. I'm usually working with web applications that have complex data, and visualization and presentation is key to making sense of the raw data. When your user also has a large screen (at least 24"), some information is out of eye sight and you need to move the pointer a long distance. How do you make sure everything that's needed stays within the visual hot points? Simple sites like blogs actually do better when the width is constrained, which results in a lot of wasted real estate. I kind of wonder if having the text box and the text preview side by side would be a big benefit for the admin side of that type of screen? (1:1 two column split). For your answers, I know almost everything in design is "it depends". What I'm looking for is: General principles you use How your approach to design has changed I'm finding that i have to retrain myself how to work with this different format. Every bump in resolution I've worked through to date has been about 25%: 640 to 800 (25% increase), 800 to 1024 (28% increase), and 1024 to 1280 (25% increase). However, the jump from 1280 to 1920 is a good 50% increase in space--the equivalent from jumping from 640 straight to 1024. There was no commonly used middle size to help learn lessons more gradually.

    Read the article

  • Java @Contented annotation to help reduce false sharing

    - by Dave
    See this posting by Aleksey Shipilev for details -- @Contended is something we've wanted for a long time. The JVM provides automatic layout and placement of fields. Usually it'll (a) sort fields by descending size to improve footprint, and (b) pack reference fields so the garbage collector can process a contiguous run of reference fields when tracing. @Contended gives the program a way to provide more explicit guidance with respect to concurrency and false sharing. Using this facility we can sequester hot frequently written shared fields away from other mostly read-only or cold fields. The simple rule is that read-sharing is cheap, and write-sharing is very expensive. We can also pack fields together that tend to be written together by the same thread at about the same time. More generally, we're trying to influence relative field placement to minimize coherency misses. Fields that are accessed closely together in time should be placed proximally in space to promote cache locality. That is, temporal locality should condition spatial locality. Fields accessed together in time should be nearby in space. That having been said, we have to be careful to avoid false sharing and excessive invalidation from coherence traffic. As such, we try to cluster or otherwise sequester fields that tend to written at approximately the same time by the same thread onto the same cache line. Note that there's a tension at play: if we try too hard to minimize single-threaded capacity misses then we can end up with excessive coherency misses running in a parallel environment. Theres no single optimal layout for both single-thread and multithreaded environments. And the ideal layout problem itself is NP-hard. Ideally, a JVM would employ hardware monitoring facilities to detect sharing behavior and change the layout on the fly. That's a bit difficult as we don't yet have the right plumbing to provide efficient and expedient information to the JVM. Hint: we need to disintermediate the OS and hypervisor. Another challenge is that raw field offsets are used in the unsafe facility, so we'd need to address that issue, possibly with an extra level of indirection. Finally, I'd like to be able to pack final fields together as well, as those are known to be read-only.

    Read the article

  • Data Source Use of Oracle Edition Based Redefinition (EBR)

    - by Steve Felts
    Edition-based redefinition is a new feature in the 11gR2 release of the Oracle database. It enables you to upgrade the database component of an application while it is in use, thereby minimizing or eliminating down time. It works by allowing for a pre-upgrade and post-upgrade view of the data to exist at the same time, providing a hot upgrade capability. You can then specify which view you want for a particular session.  See the Oracle Database Advanced Application Developer's Guide for further information. There is also a good white paper at Edition Based Definition. Using this feature of the Oracle database does not require any new WebLogic Server functionality. It is set for each connection in the pool automatically by simply specifying SQL ALTER SESSION SET EDITION = edition_name in the Init SQL parameter in the data source configuration. This can be configured either via the console or via WLST (setInitSQL on the JDBCConnectionPoolParams). This SQL statement is executed for each newly created physical database connection.Note that we are assuming that a data source references only one edition of the database. To make use of this feature, you would have an earlier version of the application with a data source that references the earlier EDITION and a later version of the application with a data source that references the later EDITION.   Once you start talking about multiple versions of a WLS application, you should be using the WLS "side-by-side" or "versioned" deployment feature.  See Developing Applications for Production Redeployment for more information.  By combining Oracle database EBR and WLS versioned deployment, the application can be failed over with no downtime, making the combination of features more powerful than either independently. There is a catch - you need to be running with a versioned database and a versioned application initially so then you can switch versions.  The recommended way to version a WLS application is to simply add the "Weblogic-Application-Version" property in the MANIFEST.MF file(you can also specify it at deployment time). The recommended way to configure the data source is to use a packaged data source descriptor that's stored in the ear or war so that everything is self-contained.  There are some restrictions.  You can't use a packaged data source with Logging Last Resource (LLR) - you need to use a system resource.  You can't use an application-scoped packaged data source with EmulateTwoPhaseCommit for the global-transactions-protocol with a versioned application - use a global scope.  See Configuring JDBC Application Modules for Deployment for more details. There's one known problem - it doesn't work correctly with an XA data source (patch available with bug 14075837).

    Read the article

  • Toshiba wireless is blocked

    - by zorrillo
    I have the same problem, a 32 bits toshiba nb255, it first had the windows 7 bu next I installed the ubuntu 11.04. The wifi does not turn on. I used the following issues the commands rfkill unblock wlan0, sudo ifconfig wlan0 down; they were not able. by setting up the bios in advanced menu, the wireless communication sw in ON, but it did not work also. neither the utilities toshiba nor utilities of ubuntu (wicd, wifi radar). by using gedit to file group, nothing. by installing madwifi packet, nothing. by exporting the wifi driver from windows to ubuntu, by means of the NDISwrapper packet, neither. I put the current scripts of the ouput of the cli root@zorrillo:~# rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes root@zorrillo:~# sudo lspci | grep Atheros 07:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) root@zorrillo:~# root@zorrillo:~# ifconfig -a eth0 Link encap:Ethernet direcciónHW 88:ae:1d:47:df:e1 ACTIVO DIFUSIÓN MULTICAST MTU:1500 Métrica:1 Paquetes RX:0 errores:0 perdidos:0 overruns:0 frame:0 Paquetes TX:0 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:1000 Bytes RX:0 (0.0 B) TX bytes:0 (0.0 B) Interrupción:43 Dirección base: 0xe000 lo Link encap:Bucle local Direc. inet:127.0.0.1 Másc:255.0.0.0 Dirección inet6: ::1/128 Alcance:Anfitrión ACTIVO BUCLE FUNCIONANDO MTU:16436 Métrica:1 Paquetes RX:8 errores:0 perdidos:0 overruns:0 frame:0 Paquetes TX:8 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:0 Bytes RX:480 (480.0 B) TX bytes:480 (480.0 B) ppp0 Link encap:Protocolo punto a punto Direc. inet:189.203.115.236 P-t-P:192.168.226.1 Másc:255.255.255.255 ACTIVO PUNTO A PUNTO FUNCIONANDO NOARP MULTICAST MTU:1500 Métrica:1 Paquetes RX:6384 errores:30 perdidos:0 overruns:0 frame:0 Paquetes TX:6893 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:3 Bytes RX:5473081 (5.4 MB) TX bytes:974316 (974.3 KB) wlan0 Link encap:Ethernet direcciónHW 00:26:4d:c3:d0:44 DIFUSIÓN MULTICAST MTU:1500 Métrica:1 Paquetes RX:0 errores:0 perdidos:0 overruns:0 frame:0 Paquetes TX:0 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:1000 Bytes RX:0 (0.0 B) TX bytes:0 (0.0 B) note.-it is logical all the counters are cero if the wireless device is down root@zorrillo:/home/zorrillo/Descargas/802BGA# ifconfig wlan0 up SIOCSIFFLAGS: Operation not possible due to RF-kill root@zorrillo:/home/zorrillo/Descargas/802BGA# It would seem the wireless switching does not react with whichever ubuntu 11.04 command (I hope to be wrong). The target remains the same, in order of the scripts above. I am worried, I have tried to find any answer for days and nights. Toshiba does not supply drivers or soft support for linux, marketing of course. I only see the device is up by protocols and down phisically, My question is, is it possible to enable or not shutdown physically the device?, because in the toshiba model nb255 the wifi is not set up/down bye means of a physical switch, but by means a combination of Fn + F8 (only for windows 7, no one more), Is there one possibility to configure the hot keys in ubuntu?

    Read the article

  • Fans running very fast on MacBook Pro 8.1 ubuntu 12.04

    - by Tomasz Kacprzak
    I installed Ubuntu 12.04 on Macbook Pro 8.1 and one of the first things I noticed was that the fans were starting to spin very fast every few minutes for 10-30 sec and then going back to normal. That was happening even without any processor load, when completely idle. The fans were usually spinning at 4000 RPM and made much noise. The computer was not getting hotter than usual. When running OSX Lion there was no noise at all, fans almost all the time at 2000 RPM. I spent some time on it and found out that Precise uses a deamon to control the temperature, called macfanctld. You can use /etc/macfanctld.conf to set the configuration. I found out that the high fan speed is not due to the fact that the temperature is getting hot, but because there are two sensors which indicate wrong numbers (you can check that using 'sensors' command ): TW0P: +129.0°C TCTD: +256.0°C TCFC: +0.0°C TMBS: +0.0°C or setting the macfanctld log level to 2: Speed: 4992, *AVG: 56.9C, TC0P: 50.2C, TG0P: 51.5C, Sensors: TB0T:34 TB1T:34 TB2T:33 TC0C:58 TC0D:56 TC0E:59 TC0F:60 TC0P:50 TC1C:58 TC2C:58 TC3C:58 TC4C:57 TCFC:0 TCGC:57 TCSA:53 TCTD:256 TG0D:52 TG0P:52 THSP:42 TM0S:64 TMBS:0 TP0P:54 TPCD:60 TW0P:129 Th1H:51 Th2H:48 Tm0P:40 Ts0P:32 Ts0S:43 Moreover, TCTD was randomly jumping from temperatures of 0 to 256, so this may be the reason for unjustified random fan speeds. macfanctld is taking an average of the sensors including the values above, so the actual AVG temp used to control the fans is wrong, usually biased up, hence high RPM and noise. The workaround solution is to use an option in the macfanctld.conf which allows to ignore the malfunctioning sensors: exclude: 13 16 21 24 After reboot the reported temperatures are usually normal and the fans are working at reasonable speeds. I tested the response of the fans to heavy processor load by asking MATLAB to invert 10000x10000 matrix and the AVG temperature jumped to 63deg, and the fan to max 6200 RPM and then got it back to normal temperature. So I think it is safe so far. There is a expired bug about the failing sensor readings: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/955538 which may be good to open again. My question would be: does anyone know what the failing sensors do and if there is any danger in excluding them? Maybe some better solution to this problem?

    Read the article

  • What's Happening in Business Analytics at OpenWorld 2012?

    - by jmorourke
    Oracle OpenWorld 2012 is rapidly approaching on September 30th when we take over the city of San Francisco for five days.  The Business Analytics this year is our strongest ever with over 150 EPM, BI, Analytics and Data Warehousing sessions delivered by Oracle, our customers and partners.  We’ll also have Hands-On Labs, 20 demo pods dedicated to Business Analytics products, and over 30 partners exhibiting their solutions.  So what’s hot in the Business Analytics program at OpenWorld?  Here are some of the “can’t miss” sessions at this year’s conference: The EPM and BI general sessions, led by SVP of Product Development Balaji Yelamanchili will highlight what’s new provide a view into Oracle’s EPM, BI and Analytics strategies.  Both sessions are scheduled on Monday, October 1st. Thursday Keynote:  See More, Act Faster:  Oracle Business Analytics, led by Oracle President Mark Hurd, will provide a view into Oracle’s strategy for Business Analytics, especially engineered systems designed to provide extreme performance for the most rigorous analytic tasks. Superfast Business Intelligence with Oracle Exalytics.  Hear about various business intelligence scenarios in which Oracle Exalytics provides exemplary value—from operational reporting and prepackaged applications to analytics on unstructured data. Turn Insights into Real-Time Actions with Oracle Business Intelligence Mobile.  Learn how Oracle Business Intelligence Mobile enables organizations to deliver relevant information and turn insight into real-time action, no matter where employees are located. Empowering the Business User: Introduction to Oracle Endeca Information Discovery.  Find out how you can find fast answers to the new questions that confront your business every day, while avoiding the confusion and inconsistencies brought about by spreadsheets and desktop tools. Big Data:  The Big Story.  Learn how to harness big data, your existing data, and predictive analytics to make better decisions in an environment of rapid shifts in behavior and instant feedback.  Learn about the technologies that constitute a big data architecture, how to leverage and implement advanced analytics for real-time decisions, and the tools needed to know the unknown. Planning at the Speed of Business with Oracle Exalytics.  Learn how Oracle Hyperion Planning leverages the power of Oracle Exalytics to do planning faster, with more detail and more users than ever. For more details on these and other Business Analytics sessions at OpenWorld, download the Focus On Business Analytics program guide at:  http://www.oracle.com/openworld/focus-on/index.html We look forward to seeing you in San Francisco!

    Read the article

  • Fans running very fast on MacBook Pro 8.1

    - by Tomasz Kacprzak
    I installed Ubuntu 12.04 on Macbook Pro 8.1 and one of the first things I noticed was that the fans were starting to spin very fast every few minutes for 10-30 sec and then going back to normal. That was happening even without any processor load, when completely idle. The fans were usually spinning at 4000 RPM and made much noise. The computer was not getting hotter than usual. When running OSX Lion there was no noise at all, fans almost all the time at 2000 RPM. I spent some time on it and found out that Precise uses a deamon to control the temperature, called macfanctld. You can use /etc/macfanctld.conf to set the configuration. I found out that the high fan speed is not due to the fact that the temperature is getting hot, but because there are two sensors which indicate wrong numbers (you can check that using 'sensors' command ): TW0P: +129.0°C TCTD: +256.0°C TCFC: +0.0°C TMBS: +0.0°C or setting the macfanctld log level to 2: Speed: 4992, *AVG: 56.9C, TC0P: 50.2C, TG0P: 51.5C, Sensors: TB0T:34 TB1T:34 TB2T:33 TC0C:58 TC0D:56 TC0E:59 TC0F:60 TC0P:50 TC1C:58 TC2C:58 TC3C:58 TC4C:57 TCFC:0 TCGC:57 TCSA:53 TCTD:256 TG0D:52 TG0P:52 THSP:42 TM0S:64 TMBS:0 TP0P:54 TPCD:60 TW0P:129 Th1H:51 Th2H:48 Tm0P:40 Ts0P:32 Ts0S:43 Moreover, TCTD was randomly jumping from temperatures of 0 to 256, so this may be the reason for unjustified random fan speeds. macfanctld is taking an average of the sensors including the values above, so the actual AVG temp used to control the fans is wrong, usually biased up, hence high RPM and noise. The workaround solution is to use an option in the macfanctld.conf which allows to ignore the malfunctioning sensors: exclude: 13 16 21 24 After reboot the reported temperatures are usually normal and the fans are working at reasonable speeds. I tested the response of the fans to heavy processor load by asking MATLAB to invert 10000x10000 matrix and the AVG temperature jumped to 63deg, and the fan to max 6200 RPM and then got it back to normal temperature. So I think it is safe so far. There is a expired bug about the failing sensor readings: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/955538 which may be good to open again. My question would be: does anyone know what the failing sensors do and if there is any danger in excluding them? Maybe some better solution to this problem?

    Read the article

  • ATI Radeon HD7000 Series (Laptop) - Switch Mode Between ATI & Intel Integrated GPU. Stuck on Boot Screen On Intel GPU Selection Mode

    - by Monkey Drone
    Laptop Specs: HP Pavilion G6-2020SE GPUs 1) ATI HD7000 Series 2) Intel Integrated OS Installed: x) Ubuntu 12.04 (64 bit) i) ATI Graphics Card Drivers Installed From AMD website. Note: Graphics Card Drivers are Working Fine in 3D Mode. It runs a little Hot as it should since its a GPU. Observation) AMD Catalyst Control Centre Lets me Choose If I want to run the system in HIGH-END (ATI GPU) OR Intel Integrated (Better battery life) While I am on High End GPU Choice, Ubuntu works fine. Problem) But when I switch to Intel Mode in the AMD CCC and reboot the Machine. Ubuntu goes into 'Low Graphics Mode'. The problem is not that it goes into low graphics mode, it is completely expected since I am no longer using the ATI GPU but the integrated Intel GPU. Problem starts with the 'Selection' of the options. During that screen, I have no mouse on the screen (even tried plugging in an external USB mouse) & No Keyboard functionality. Thus I am left completely disabled to choose any option and load into Ubuntu. The Only thing I can do is switch to a terminal and enable ATI GPU through command-line and Ubuntu works Fine again. Is it a bug that there is no mouse/keyboard available to me during the startup of Ubuntu when its launched in Low-Graphics Mode? Any suggestions on how to pass through that? My palms are sweating as I write this down because the ATI GPU is really heating up my laptop. I dont want to boot into Windows or keep it around any longer than necessary. Please advise with help and directions. Sincerely, MonkeyD Edit1: The Answer by Celso has helped me switch to Intel, thus giving me sufficient battery power. Kudos to Celso. Now I can at least use my laptop for the time being without having it burn hair off my skin. I am still looking for answer to my original question of, 'why is lightdm not working properly when I switch to Intel GPU using ATI HD7000 series official drivers provided by AMD'.

    Read the article

  • How do you turn on the customizable gnome-panel features (like gnome-applets) in Precise?

    - by chriv
    I resurrected a broken laptop today. I took out the HDD, put it in a USB 3.0 enclosure, and created a VM that would use it. It was running lucid. I took a screenshot of the desktop before I started "do-release-upgrade", because from experience, I will never have my GUI back the way I want it again. I know how to install gnome-panel to get back the "Gnome Classic" session option. I know how to put my minimize, maximize, and close buttons back in the upper-right hand corner of windows (where they belong). I know how to use gdm instead of lightdm. Unity gets worse in every version (and the other desktop OS is going to be even worse with Metro). Here's what I don't know (in order of importance): 1. How do you make the panels in gnome (gnome-panel, to be precise) customizable again (like they were in older versions of Ubuntu)? 2. How do you install applets in the panels now (right-click is now ignored)? 3. How can you customize all of the window elements (like you could in older versions of Ubuntu)? I can't remember much about maverick, natty, or oneiric (except their names), so I don't know exactly when I lost these capabilities. Edit: (no screenshot), my StackExchange reputation (on other StackExchange sites) doesn't carry over to this site, so I can't post the screenshot. Take a look at the panels in the screen hot. They are nice, compact, and VERY functional (disk mounter applet, frequently used shortcuts, workspaces, show desktop, kill window, and trash icons, etc.) Notice how small the fonts (and how little real estate they waste). You can't notice the compact title bars, fonts, and window icons in this screen shot (since I redacted the rest of the desktop), but it's the same story there. Please help. I don't want to learn another distro, but Ubuntu gets less customizable with every "upgrade." Screenshot (not an inline image, since I don't have the reputation yet)... i.stack.imgur.com/puoUT.png

    Read the article

  • Developer career feeling like going back in time every new job [closed]

    - by komediant
    Is there a good category for this question? My background is bachelor in ICT and for a hobby I am programming already since I was around twelve I think. Started with QBasic, Pascal, C, Java et cetera. Currently I am working for about eight/nine years. Half academics/medical and half company world. A few years ago I started with frameworks and I began with Grails (underlying Spring/Hibernate), which was a heavenly job, very productive and no hassle. My previous job I developed in pure Spring/Hibernate Java, which was a bit more writing annotations and XML and no conventions like Grails. But still, I did like Spring/Hibernate a lot and the professional setup with a developmentstreet, versioning, Jenkins/Sonar, log4j and a good IDE like IntellIJ. It felt quite 'clear' and organised, although I knew Grails which felt a bit more productive. But...at my current job almost half the code is pure servlet, hard coded JDBC (connections handled by yourself), scriptlets in all JSP pages, no service layer, no versioning, no Maven, HTML in DAO-layer, JAR-hell, no hot swap deployment locally, every change you have to deploy and hope it works fine on the server. All local development needs ugly scriptlet tags to check which environment it is running. Et cetera. Now and then developers work over in the evening - I don't - and still lots of issues are not solved and new projects are waiting. I hear the developers complaining, but somehow they feel like what they have now is "advanced" or they are in a sort of comfore zone. The lead developer seems open for new things, but half of the times he says he can implement MVC-framework features himself instead of using what is already out there. So in short, I currently feel like I miss all the modern framework techniques and that the company is going so slow forward. I just work here for two months now. What I do now is also code some partially ugly stuff, but it goes in completely into my nature and I feel uncomfortable with it. Coding something takes long(er) than estimated and my manager complains about why it takes so long and I feel ashamed for myself needing so much time. Where I was used to just writing a query I now build up whole try catch methods. My manager knows my complaints and the developers do so too. There will come a meeting to line out plans for 2013 on technology and the issues I and the company are facing. I am not looking for another job yet, it's close to wehre I live and the economy is fragile. Does anyone else have had this kind of career, like feeling going backwards witch technology? And how did you cope with it?

    Read the article

  • How can I improve the battery life under 12.04 on my Inspiron 14z? [duplicate]

    - by cfogelberg
    This question already has an answer here: Tips to extend battery life for laptops and notebooks 24 answers How do I improve the battery life of my Inspiron 14z under Ubuntu 12.04? This laptop gets 4-5 hours of battery life using Windows (e.g. here). I've removed Windows, installed Ubuntu 12.04 and the initial battery life was only 2 hours. With some tweaks (described below) it's still only ~2.5 hours. For reference, the laptop is the latest model of the 14z: i5-3337U processor 32GB MSATA, 500GB HDD (5400rpm) AMD Radeon HD7570M graphics card I have put ext4 partitions on both the SSD and the HDD, and have mounted / to the SSD and /home to the HDD. I also put a 24gb linux swap partition at the start of the HDD, though I figure this won't be used all that much (the laptop has 8gb of RAM). After googling around and reading Ask Ubuntu and other sites extensively, I have done the following steps, and they have improved the battery life ~30 minutes (exact improvement not clear, but battery life is still nowhere near 4-5 hours). Installed Jupiter (and set Performance to "Power Saving") Installed laptop-mode-tools cat /proc/sys/vm/laptop_mode now outputs 5 (previously it output 0) But it's not clear that this will help: AskUbuntu question Turned down the brightness of my screen from full to 1/3 Other things I have heard about but have not tried for fear of frying the laptop or my linux install: Add "pcie_aspm=force" at the end of the line with "quiet splash" in /boot/grub/grub.cfg Enable ALPM, but it may already be enabled in 12.04? Enable i915 framebuffer compression Use a propietary driver for the graphics card? Turn off the graphics card? (what would happen if I relied on the internal Intel bridge?) Use TLP? Spin down the HDD more aggressively (howto, but I think laptop-mode-tools does this already) The only other thing I've noticed is that plastic just above the F5, F6 and F7 keys gets really hot. According to Jupiter my CPU temperature is only 69 celsius and the System Monitor shows CPU load at 7% so I don't think it's the CPU. Maybe it's the graphics card? Also, I've set up MongoDB and LAMP on the machine as well. When I run powertop MongoDB is high in the list, but I'm not sure if that's relevant to battery life because I'm not actually doing anything with MongoDB most of the time. Edit - Additional info as requested $ lspci -nnk | grep -iEA3 "(graphics|vga)" 00:02.0 VGA compatible controller [0300]: Intel Corporation Ivy Bridge Graphics Controller [8086:0166] (rev 09) Subsystem: Dell Device [1028:057f] Kernel driver in use: i915 Kernel modules: i915 -- 02:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Thames [Radeon 7500M/7600M Series] [1002:6841] Subsystem: Dell Device [1028:057f] Kernel driver in use: radeon Kernel modules: radeon

    Read the article

  • Reasons NOT to use JSF [closed]

    - by Vain Fellowman
    I am new to StackExchange, but I figured you would be able to help me. We're crating a new Java Enterprise application, replacing an legacy JSP solution. Due to many many changes, the UI and parts of the business logic will completely be rethought and reimplemented. Our first thought was JSF, as it is the standard in Java EE. At first I had a good impression. But now I am trying to implement a functional prototype, and have some really serious concerns about using it. First of all, it creates the worst, most cluttered invalid pseudo-HTML/CSS/JS mix I've ever seen. It violates every single rule I learned in web-development. Furthermore it throws together, what never should be so tightly coupled: Layout, Design, Logic and Communication with the server. I don't see how I would be able to extend this output comfortably, whether styling with CSS, adding UI candy (like configurable hot-keys, drag-and-drop widgets) or whatever. Secondly, it is way too complicated. Its complexity is outstanding. If you ask me, it's a poor abstraction of basic web technologies, crippled and useless in the end. What benefits do I have? None, if you think about. Hundreds of components? I see ten-thousands of HTML/CSS snippets, ten-thousands of JavaScript snippets and thousands of jQuery plug-ins in addition. It solves really many problems - we wouldn't have if we wouldn't use JSF. Or the front-controller pattern at all. And Lastly, I think we will have to start over in, say 2 years. I don't see how I can implement all of our first GUI mock-up (Besides; we have no JSF Expert in our team). Maybe we could hack it together somehow. And then there will be more. I'm sure we could hack our hack. But at some point, we'll be stuck. Due to everything above the service tier is in control of JSF. And we will have to start over. My suggestion would be to implement a REST api, using JAX-RS. Then create a HTML5/Javascript client with client side MVC. (or some flavor of MVC..) By the way; we will need the REST api anyway, as we are developing a partial Android front-end, too. I doubt, that JSF is the best solution nowadays. As the Internet is evolving, I really don't see why we should use this 'rake'. Now, what are pros/cons? How can I emphasize my point to not use JSF? What are strong points to use JSF over my suggestion?

    Read the article

  • Failed to resolve artifact. Missing: ---------- 1) org.codehaus.mojo:gwt-maven-plugin:jar:1.3-SNAPSHOT

    - by karim
    i want to use the addon vaadin Timeline, so i have to make "gwt-maven-plugin 3.1" as i know ,my pom.xml is the following : <?xml version="1.0"?> <project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/maven-v4_0_0.xsd"> <modelVersion>4.0.0</modelVersion> <groupId>life</groupId> <artifactId>life</artifactId> <packaging>war</packaging> <name>life Portlet</name> <version>0.0.1-SNAPSHOT</version> <url>http://maven.apache.org</url> <properties> <vaadin-widgets-dir>src/main/webapp/VAADIN/widgetsets</vaadin-widgets-dir> </properties> <build> <plugins> <plugin> <groupId>com.liferay.maven.plugins</groupId> <artifactId>liferay-maven-plugin</artifactId> <version>6.1.0</version> <configuration> <autoDeployDir>${liferay.auto.deploy.dir}</autoDeployDir> <liferayVersion>6.1.0</liferayVersion> <pluginType>portlet</pluginType> </configuration> </plugin> <plugin> <artifactId>maven-compiler-plugin</artifactId> <configuration> <encoding>UTF-8</encoding> <source>1.5</source> <target>1.5</target> </configuration> </plugin> <plugin> <groupId>com.vaadin</groupId> <artifactId>vaadin-maven-plugin</artifactId> <version>1.0.1</version> </plugin> <!-- Compiles your custom GWT components with the GWT compiler --> <plugin> <groupId>org.codehaus.mojo</groupId> <artifactId>gwt-maven-plugin</artifactId> <version>2.1.0-1</version> <configuration> <!-- if you don't specify any modules, the plugin will find them --> <!--modules> .. </modules --> <webappDirectory>${project.build.directory}/${project.build.finalName}/VAADIN/widgetsets</webappDirectory> <extraJvmArgs>-Xmx512M -Xss1024k</extraJvmArgs> <runTarget>clean</runTarget> <hostedWebapp>${project.build.directory}/${project.build.finalName}</hostedWebapp> <noServer>true</noServer> <port>8080</port> <soyc>false</soyc> </configuration> <executions> <execution> <goals> <goal>resources</goal> <goal>compile</goal> </goals> </execution> </executions> </plugin> <!-- Updates Vaadin 6.2+ widgetset definitions based on project dependencies --> <plugin> <groupId>com.vaadin</groupId> <artifactId>vaadin-maven-plugin</artifactId> <version>1.0.1</version> <executions> <execution> <configuration> <!-- if you don't specify any modules, the plugin will find them --> <!-- <modules> <module>${package}.gwt.MyWidgetSet</module> </modules> --> </configuration> <goals> <goal>update-widgetset</goal> </goals> </execution> </executions> </plugin> </plugins> <pluginManagement> <plugins> <!--This plugin's configuration is used to store Eclipse m2e settings only. It has no influence on the Maven build itself. --> <plugin> <groupId>org.eclipse.m2e</groupId> <artifactId>lifecycle-mapping</artifactId> <version>1.0.0</version> <configuration> <lifecycleMappingMetadata> <pluginExecutions> <pluginExecution> <pluginExecutionFilter> <groupId> org.codehaus.mojo </groupId> <artifactId> gwt-maven-plugin </artifactId> <versionRange> [2.1.0-1,) </versionRange> <goals> <goal>resources</goal> </goals> </pluginExecutionFilter> <action> <ignore></ignore> </action> </pluginExecution> <pluginExecution> <pluginExecutionFilter> <groupId>com.vaadin</groupId> <artifactId> vaadin-maven-plugin </artifactId> <versionRange> [1.0.1,) </versionRange> <goals> <goal> update-widgetset </goal> </goals> </pluginExecutionFilter> <action> <ignore></ignore> </action> </pluginExecution> </pluginExecutions> </lifecycleMappingMetadata> </configuration> </plugin> </plugins> </pluginManagement> </build> <dependencies> <dependency> <groupId>com.liferay.portal</groupId> <artifactId>portal-service</artifactId> <version>6.1.0</version> <scope>provided</scope> </dependency> <dependency> <groupId>com.liferay.portal</groupId> <artifactId>util-bridges</artifactId> <version>6.1.0</version> <scope>provided</scope> </dependency> <dependency> <groupId>org.vaadin.addons</groupId> <artifactId>vaadin-timeline-agpl-3.0</artifactId> <version>1.2.4</version> </dependency> <dependency> <groupId>com.liferay.portal</groupId> <artifactId>util-taglib</artifactId> <version>6.1.0</version> <scope>provided</scope> </dependency> <dependency> <groupId>com.liferay.portal</groupId> <artifactId>util-java</artifactId> <version>6.1.0</version> <scope>provided</scope> </dependency> <dependency> <groupId>javax.portlet</groupId> <artifactId>portlet-api</artifactId> <version>2.0</version> <scope>provided</scope> </dependency> <dependency> <groupId>javax.servlet</groupId> <artifactId>servlet-api</artifactId> <version>2.4</version> <scope>provided</scope> </dependency> <dependency> <groupId>javax.servlet.jsp</groupId> <artifactId>jsp-api</artifactId> <version>2.0</version> <scope>provided</scope> </dependency> <!-- sqx --> <dependency> <groupId>javax.activation</groupId> <artifactId>activation</artifactId> <version>1.1.1</version> <scope>provided</scope> </dependency> <dependency> <groupId>antlr</groupId> <artifactId>antlr</artifactId> <version>2.7.6</version> <scope>provided</scope> </dependency> <dependency> <groupId>aopalliance</groupId> <artifactId>aopalliance</artifactId> <version>1.0</version> <scope>provided</scope> </dependency> <dependency> <groupId>asm</groupId> <artifactId>asm</artifactId> <version>1.5.3</version> <scope>provided</scope> </dependency> <dependency> <groupId>asm</groupId> <artifactId>asm-attrs</artifactId> <version>1.5.3</version> <scope>provided</scope> </dependency> <dependency> <groupId>org.aspectj</groupId> <artifactId>aspectjrt</artifactId> <version>1.6.8</version> <scope>provided</scope> </dependency> <dependency> <groupId>org.aspectj</groupId> <artifactId>aspectjweaver</artifactId> <version>1.6.8</version> <scope>provided</scope> </dependency> <dependency> <groupId>bsh</groupId> <artifactId>bsh</artifactId> <version>1.3.0</version> <scope>provided</scope> </dependency> <dependency> <groupId>cglib</groupId> <artifactId>cglib</artifactId> <version>2.1_3</version> <scope>provided</scope> </dependency> <dependency> <groupId>commons-collections</groupId> <artifactId>commons-collections</artifactId> <version>3.1</version> <scope>provided</scope> </dependency> <dependency> <groupId>commons-dbcp</groupId> <artifactId>commons-dbcp</artifactId> <version>1.3</version> </dependency> <dependency> <groupId>commons-logging</groupId> <artifactId>commons-logging</artifactId> <version>1.1</version> </dependency> <dependency> <groupId>commons-pool</groupId> <artifactId>commons-pool</artifactId> <version>1.5.3</version> </dependency> <dependency> <groupId>dom4j</groupId> <artifactId>dom4j</artifactId> <version>1.6.1</version> </dependency> <dependency> <groupId>net.sf.ehcache</groupId> <artifactId>ehcache</artifactId> <version>1.2.3</version> </dependency> <dependency> <groupId>org.hibernate</groupId> <artifactId>hibernate-core</artifactId> <version>3.3.1.GA</version> </dependency> <dependency> <groupId>hsqldb</groupId> <artifactId>hsqldb</artifactId> <version>1.8.0.10</version> </dependency> <!-- <dependency> <groupId>jboss</groupId> <artifactId>jboss-backport-concurrent</artifactId> <version>2.1.0.GA</version> </dependency> --> <dependency> <groupId>org.slf4j</groupId> <artifactId>slf4j-parent</artifactId> <version>1.5.0</version> </dependency> <dependency> <groupId>javax.jcr</groupId> <artifactId>jcr</artifactId> <version>1.0</version> </dependency> <!-- <dependency> <groupId>javax.sql</groupId> <artifactId>jdbc-stdext</artifactId> <version>2.0</version> </dependency> --> <dependency> <groupId>jdom</groupId> <artifactId>jdom</artifactId> <version>1.0</version> </dependency> <dependency> <groupId>javax.transaction</groupId> <artifactId>jta</artifactId> <version>1.1</version> </dependency> <dependency> <groupId>log4j</groupId> <artifactId>log4j</artifactId> <version>1.2.14</version> </dependency> <dependency> <groupId>javax.mail</groupId> <artifactId>mail</artifactId> <version>1.4.3</version> </dependency> <dependency> <groupId>com.sun.portal.portletcontainer</groupId> <artifactId>container</artifactId> <version>1.1-m4</version> </dependency> <dependency> <groupId>postgresql</groupId> <artifactId>postgresql</artifactId> <version>8.4-702.jdbc3</version> </dependency> <!-- sl4j-api-1.5.0 manquante --> <dependency> <groupId>org.slf4j</groupId> <artifactId>slf4j-parent</artifactId> <version>1.5.0</version> </dependency> <dependency> <groupId>org.slf4j</groupId> <artifactId>slf4j-log4j12</artifactId> <version>1.5.0</version> </dependency> <dependency> <groupId>org.springframework</groupId> <artifactId>spring-aop</artifactId> <version>2.5.6</version> </dependency> <dependency> <groupId>org.springframework</groupId> <artifactId>spring-aspects</artifactId> <version>3.0.3.RELEASE</version> </dependency> <dependency> <groupId>org.springframework</groupId> <artifactId>spring-beans</artifactId> <version>2.5.6</version> </dependency> <dependency> <groupId>org.springframework</groupId> <artifactId>spring-context</artifactId> <version>2.5.6</version> </dependency> <dependency> <groupId>org.springframework</groupId> <artifactId>spring-context-support</artifactId> <version>2.5.6</version> </dependency> <dependency> <groupId>org.springframework</groupId> <artifactId>spring-core</artifactId> <version>2.5.6</version> </dependency> <dependency> <groupId>org.springframework</groupId> <artifactId>spring-jdbc</artifactId> <version>2.5.6</version> </dependency> <dependency> <groupId>org.springframework</groupId> <artifactId>spring-jms</artifactId> <version>2.5.6</version> </dependency> <dependency> <groupId>javax.jms</groupId> <artifactId>jms</artifactId> <version>1.1</version> <scope>compile</scope> </dependency> <!-- <dependency> <groupId>org.springmodules</groupId> <artifactId>spring-modules-jbpm31</artifactId> <version>0.9</version> <scope>provided</scope> </dependency> --> <dependency> <groupId>org.springframework</groupId> <artifactId>spring-orm</artifactId> <version>2.5.6</version> </dependency> <dependency> <groupId>org.springframework.ws</groupId> <artifactId>spring-oxm</artifactId> <version>1.5.0</version> <scope>provided</scope> </dependency> <dependency> <groupId>org.springframework.security</groupId> <artifactId>spring-security-core</artifactId> <version>2.0.4</version> </dependency> <dependency> <groupId>org.springframework</groupId> <artifactId>spring-tx</artifactId> <version>2.5.6</version> </dependency> <dependency> <groupId>org.springframework</groupId> <artifactId>spring-web</artifactId> <version>2.5.6</version> </dependency> <dependency> <groupId>org.springframework</groupId> <artifactId>spring-webmvc-portlet</artifactId> <version>2.5</version> </dependency> <dependency> <groupId>com.atomikos</groupId> <artifactId>transactions-hibernate3</artifactId> <version>3.6.4</version> </dependency> <dependency> <groupId>com.atomikos</groupId> <artifactId>transactions-osgi</artifactId> <version>3.7.0</version> </dependency> <dependency> <groupId>com.vaadin</groupId> <artifactId>vaadin</artifactId> <version>6.7.0</version> </dependency> <dependency> <groupId>com.thoughtworks.xstream</groupId> <artifactId>xstream</artifactId> <version>1.3.1</version> </dependency> <!-- this is the dependency to the "jar"-subproject --> <dependency> <groupId>org.codehaus.plexus</groupId> <artifactId>plexus-utils</artifactId> <version>1.5.9</version> </dependency> <dependency> <groupId>com.google.gwt</groupId> <artifactId>gwt-user</artifactId> <version>2.1.1</version> <scope>provided</scope> </dependency> </dependencies> <!-- Define our plugin repositories --> <pluginRepositories> <pluginRepository> <id>Codehaus</id> <name>Codehaus Maven Plugin Repository</name> <url>http://repository.codehaus.org/org/codehaus/mojo</url> <snapshots> <enabled>true</enabled> </snapshots> </pluginRepository> <pluginRepository> <id>codehaus-snapshots</id> <url>[http://nexus.codehaus.org/snapshots]</url> <snapshots> <enabled>true</enabled> </snapshots> <releases> <enabled>false</enabled> </releases> </pluginRepository> </pluginRepositories> <repositories> <repository> <id>vaadin-addons</id> <url>http://maven.vaadin.com/vaadin-addons</url> </repository> <repository> <id>demoiselle.sourceforge.net</id> <name>Demoiselle Maven Repository</name> <url>http://demoiselle.sourceforge.net/repository/release</url> </repository> </repositories> AND when i do "clean install" to build my mvn , the console show me this taken : [INFO] Unable to find resource 'org.codehaus.mojo:gwt-maven-plugin:jar:1.3-SNAPSHOT' in repository demoiselle.sourceforge.net (http://demoiselle.sourceforge.net/repository/release) [INFO] ------------------------------------------------------------------------ [ERROR] BUILD ERROR [INFO] ------------------------------------------------------------------------ [INFO] Failed to resolve artifact. Missing: ---------- 1) org.codehaus.mojo:gwt-maven-plugin:jar:1.3-SNAPSHOT Try downloading the file manually from the project website. Then, install it using the command: mvn install:install-file -DgroupId=org.codehaus.mojo -DartifactId=gwt-maven-plugin - Dversion=1.3-SNAPSHOT -Dpackaging=jar -Dfile=/path/to/file Alternatively, if you host your own repository you can deploy the file there: mvn deploy:deploy-file -DgroupId=org.codehaus.mojo -DartifactId=gwt-maven-plugin -Dversion=1.3-SNAPSHOT -Dpackaging=jar -Dfile=/path/to/file -Durl=[url] -DrepositoryId=[id] Path to dependency: 1) com.vaadin:vaadin-maven-plugin:maven-plugin:1.0.1 2) org.codehaus.mojo:gwt-maven-plugin:jar:1.3-SNAPSHOT ---------- 1 required artifact is missing. for artifact: com.vaadin:vaadin-maven-plugin:maven-plugin:1.0.1 from the specified remote repositories: demoiselle.sourceforge.net (http://demoiselle.sourceforge.net/repository/release), central (http://repo1.maven.org/maven2), Codehaus (http://repository.codehaus.org/org/codehaus/mojo), codehaus-snapshots ([http://nexus.codehaus.org/snapshots]), vaadin-snapshots (http://oss.sonatype.org/content/repositories/vaadin-snapshots/), vaadin-releases (http://oss.sonatype.org/content/repositories/vaadin-releases/), vaadin-addons (http://maven.vaadin.com/vaadin-addons) your help will be welcome thank you a lot !!! :)))

    Read the article

  • Mixing SSL and non-SSL content in an Apache2 virtual host

    - by gravyface
    I have a (hopefully) common scenario for one of my sites that I just can't seem to figure out how to deploy correctly. I have the following site and directories for example.com: These need to require SSL: /var/www/example.com/admin /var/www/example.com/order These need to be non-SSL: /var/www/example.com/maps These need to support both: /var/www/example.com/css /var/www/example.com/js /var/www/example.com/img I have two virtual host declarations for the one site in my /sites-available/example.com file; the top one is *:443 the second one is *:80. Since I have two sites, and if a request comes in on 443, the top virtualhost is used, same with the bottom if it's a port 80 request. However, I can't seem to enforce my SSL requirements using SSLRequireSSL because I'm assuming a port 80 request to /admin or /order is not even hitting the *:443 vhost. Should I just Deny All to /order and /admin within the *:80 virtual host so that if you try to request it on 80, you'll get a 403 Forbidden?

    Read the article

  • Bad disk performance on HP DL360 with Smarty Array P400i RAID controller

    - by sarge
    I have a HP DL360 server with 4x 146GB SAS disks and a Smart Array P400i RAID controller with 256MB cache. The disks are in RAID 5 (3 disks + 1 hot spare). The server is running VMware ESX 3i. The disk write performance is really bad. Here are some numbers: ns1:~# hdparm -tT /dev/sda /dev/sda: Timing cached reads: 3364 MB in 2.00 seconds = 1685.69 MB/sec Timing buffered disk reads: 18 MB in 3.79 seconds = 4.75 MB/sec ns1:~# time sh -c "dd if=/dev/zero of=ddfile bs=8k count=125000 && sync" 125000+0 records in 125000+0 records out 1024000000 bytes (1.0 GB) copied, 282.307 s, 3.6 MB/s real 4m52.003s user 0m2.160s sys 3m10.796s Compared to another server those number are terrible: Dell R200, 2x 500GB SATA disks, PERC raid controller (disks are mirrored). web4:~# hdparm -tT /dev/sda /dev/sda: Timing cached reads: 6584 MB in 2.00 seconds = 3297.79 MB/sec Timing buffered disk reads: 316 MB in 3.02 seconds = 104.79 MB/sec web4:~# time sh -c "dd if=/dev/zero of=ddfile bs=8k count=125000 && sync" 125000+0 records in 125000+0 records out 1024000000 bytes (1.0 GB) copied, 35.2919 s, 29.0 MB/s real 0m36.570s user 0m0.476s sys 0m32.298s The server isn't very loaded and the VMware Infrastructure Client performance monitor is showing 550KBps average read and 1208KBps average write for the last 30 minutes (highest write rate: 6.6MBps). This has been a problem from the start. Any ideas?

    Read the article

  • blu-ray archiving in vmware ESXi 4

    - by spacecadet77
    Hi, I need some advice about using blu-ray writer for archiving data on vmware ESXi 4. At office we have IBM System x3400 Tower server with ESXi 4 hipervisor and OpenSuse and CentOS GNU/Linux system as guests. Will blu-ray writer work in this setup, and if it will is there any particular model you can suggest. Best regards IBM System x3400 Tower server specification: 1x Intel Quad-Core Xeon E5410 2.33GHz/ 12MB/ 1333MHz (2x CPU max) Intel 5000P chipset, 2x 1GB PC2-5300 DDR2 667MHz SDRAM ECC Chipkill (32GB max) 2x4GB (2x2GB) PC2-5300 CL5 ECC DDR2 FBDIMM (x3400, x3550, x3650) SAS/SATA Hot-Swap Open Bay (0xHDD std, 4xHDD max, 8xHDD optional) ServeRAID 8K dual channel SAS/SATA controller (RAID 0,1,1E,10,5,6, 256MB, Battery Backup) Graphics ATI® RN50(ES1000) 16MB DDR, CD-RW/DVD Combo no FDD GigaEthernet, Tower with Power Supply 835W (opt Redudant) Slot 1: half-length, PCI-Express x8(x4 electrical) Slot 2: full, PCI-Express x8 Slot 3: full, PCI-Express x8 Slot 4: full, 64-bit 133MHz 3.3v PCI-X Slot 5: full, 64-bit 133MHz 3.3v PCI-X , Slot 6: half-length, 32-bit 33MHz 5.0v PCI ports: 4x USB (Vers 2.0), 2x PS/2, parallel, 2x serial (9-pin), VGA, RJ-45 (ethernet ), RJ-45 (sys mgm) HDD 4 x TB 7200rpm / Serial ATA II 3.0Gb/s / 16MB, RoHS

    Read the article

  • Megacli is killing me, any help appreciated

    - by Stefan
    I run a server with 2 drives in raid0 configured through BIOS. I just added 2 more drives using hotplug (the server is dell r610 with RHEL 5.4 64bit) and I would like to configure a separate raid0 partition on these drives. I am getting the following error: /opt/MegaRAID/MegaCli/MegaCli64 -CfgLdAdd r0[32:2, 32:3] -a0 The specified physical disk does not have the appropriate attributes to complete the requested command. Exit Code: 0x26 All the parameters are correct and there is just no reason why this command could not work, see this (fujitsu is current raid, seagate is the new one I want to create): /opt/MegaRAID/MegaCli/MegaCli64 -PDList -aALL | egrep 'Adapter|Enclosure|Slot|Inquiry' Adapter #0 Enclosure Device ID: 32 Slot Number: 0 Enclosure position: 0 Inquiry Data: FUJITSU MBD2147RC D807D0A4PA101174 Enclosure Device ID: 32 Slot Number: 1 Enclosure position: 0 Inquiry Data: FUJITSU MBD2147RC D807D0A4PA10115T Enclosure Device ID: 32 Slot Number: 2 Enclosure position: 0 Inquiry Data: SEAGATE ST9300603SS FS033SE0TF5K Enclosure Device ID: 32 Slot Number: 3 Enclosure position: 0 Inquiry Data: SEAGATE ST9300603SS FS023SE070FK I also tried to set up the drive as hotspare, also some strange error: /opt/MegaRAID/MegaCli/MegaCli64 -PDHSP -Set -physdrv[32:3] -a0 Adapter: 0: Set Physical Drive at EnclId-32 SlotId-3 as Hot Spare Failed. FW error description: The specified device is in a state that doesn't support the requested command. Exit Code: 0x32 As you can see the disk is in Unconfigured, Good state: Enclosure Device ID: 32 Slot Number: 3 Enclosure position: 0 Device Id: 3 Sequence Number: 1 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SAS Raw Size: 279.396 GB [0x22ecb25c Sectors] Non Coerced Size: 278.896 GB [0x22dcb25c Sectors] Coerced Size: 278.875 GB [0x22dc0000 Sectors] Firmware state: Unconfigured(good), Spun Up SAS Address(0): 0x5000c50005cd20b1 SAS Address(1): 0x0 Connected Port Number: 3(path0) Inquiry Data: SEAGATE ST9300603SS FS023SE070FK FDE Capable: Not Capable FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: Foreign Foreign Secure: Drive is not secured by a foreign lock key Device Speed: Unknown Link Speed: Unknown Media Type: Hard Disk Device Drive Temperature :30C (86.00 F)

    Read the article

  • java.util.zip.ZipException in Glassfish (v3) application deployment

    - by Kevin
    Hello, I've got a strange exception with my EJB3.1 application, a ZipException is thrown during the application deployment: [#|2010-05-15T16:01:44.688+0100|SEVERE|glassfish3.0.1|javax.enterprise.system.container.web.org.glassfish.web.loader|_ThreadID=22;_ThreadName=Thread-1;|WEB9051: Error trying to scan the classes at /Users/kevin/Documents/netbeans/WebAlbums/trunk/WebAlbums3/WebAlbums3-ea/dist/gfdeploy/WebAlbums3-Service.jar for annotations in which a ServletContainerInitializer has expressed interest java.util.zip.ZipException: error in opening zip file at java.util.zip.ZipFile.open(Native Method) at java.util.zip.ZipFile.<init>(ZipFile.java:114) at java.util.jar.JarFile.<init>(JarFile.java:133) at java.util.jar.JarFile.<init>(JarFile.java:70) at org.glassfish.web.loader.ServletContainerInitializerUtil.getInitializerList(ServletContainerInitializerUtil.java:255) at org.apache.catalina.core.StandardContext.callServletContainerInitializers(StandardContext.java:5331) at com.sun.enterprise.web.WebModule.callServletContainerInitializers(WebModule.java:550) at org.apache.catalina.core.StandardContext.start(StandardContext.java:5263) at com.sun.enterprise.web.WebModule.start(WebModule.java:499) at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:928) at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:912) at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:694) at com.sun.enterprise.web.WebContainer.loadWebModule(WebContainer.java:1947) at com.sun.enterprise.web.WebContainer.loadWebModule(WebContainer.java:1619) at com.sun.enterprise.web.WebApplication.start(WebApplication.java:90) at org.glassfish.internal.data.EngineRef.start(EngineRef.java:126) at org.glassfish.internal.data.ModuleInfo.start(ModuleInfo.java:241) at org.glassfish.internal.data.ApplicationInfo.start(ApplicationInfo.java:236) at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:339) at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:183) at org.glassfish.deployment.admin.DeployCommand.execute(DeployCommand.java:272) at com.sun.enterprise.v3.admin.CommandRunnerImpl$1.execute(CommandRunnerImpl.java:305) at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:320) at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:1176) at com.sun.enterprise.v3.admin.CommandRunnerImpl.access$900(CommandRunnerImpl.java:83) at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1235) at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1224) at com.sun.enterprise.v3.admin.AdminAdapter.doCommand(AdminAdapter.java:365) at com.sun.enterprise.v3.admin.AdminAdapter.service(AdminAdapter.java:204) at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:166) at com.sun.enterprise.v3.server.HK2Dispatcher.dispath(HK2Dispatcher.java:100) at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:245) at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:791) at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:693) at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:954) at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:170) at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:135) at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:102) at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:88) at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:76) at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:53) at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:57) at com.sun.grizzly.ContextTask.run(ContextTask.java:69) at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:330) at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:309) at java.lang.Thread.run(Thread.java:637) |#] I don't really know how to investigate this error; I know that it's not related to the glassfish installation (same problem on Ubuntu and Mac) ... I spot a 'null' in the classpath definition (log level fine), maybe that's the reason, but I don't know how to get rid of it ... [#|2010-05-15T16:01:44.672+0100|FINE|glassfish3.0.1|javax.enterprise.system.container.web.com.sun.enterprise.web|_ThreadID=22;_ThreadName=Thread-1;ClassName=com.sun.enterprise.web.WebModuleListener;MethodName=configureJsp;| sysClasspath for WebAlbums3-ea#WebAlbums3-Servlet.war is /Users/kevin/apps/glassfishv3/glassfish/modules/antlr-repackaged.jar:...:/Users/kevin/apps/glassfishv3/glassfish/modules/gf-client-module.jar:/Users/kevin/apps/glassfishv3/glassfish/modules/javax.security.auth.message.jar:null:/Users/kevin/apps/glassfishv3/glassfish/modules/org.eclipse.persistence.antlr.jar:/Users/kevin/apps/glassfishv3/glassfish/domains/domain1/lib/classes:/Users/kevin/apps/glassfishv3/glassfish/domains/domain1/lib/RT-DB-mysql-connector-java-5.1.12-bin.jar:|#] (I'm using Netbeans 6.8, Glassfish v3, Servlet3, EJB 3.1, JPA/Hibernate) Thank you for your help

    Read the article

  • Office365 DirSync Active Directory Integration

    - by dean
    I am preparing to deploy Office365 for my organization. We have an on premise Active Directory Domain Controller (Windows Server 2012 R2). We would like to leverage our Active Directory for: automatic user provisioning in Office365, and password synchronization, using the DirSync tool. Our Active Directory Domain is example.pvt. Email is currently Rackspace Exchange and email addresses follow the form [email protected]. Active Directory User Logon Name follows the form firstinitiallastname. My Questions are: What Active Directory Attribute(s) can be use in provisioning the email address in Office365? Is it possible to use the E-mail field in Active Directory to provision the email address in Office365? Will the fact that our Active Directory Domain has a different extension (.pvt vs. .com) cause a problem with our planned provisioning method?

    Read the article

< Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >