Search Results

Search found 11425 results on 457 pages for 'ip messenger'.

Page 104/457 | < Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >

• Why ping another inet machine from MacBook get netgate's ip address?

  - by Xinwang

  I have three machine in my home network connected by a wireless router. One is server installed linux at 192.168.1.1, another is Thinkpad with MS Windows XP at 192.168.1.2, last one is MacBook Pro with Mac OS X 10.6.3 at 192.168.1.3. When I ping the Linux Server from Thinkpad (MS Windows XP) I can get the correct ip address, but when I ping it from Mac I get the global address of my router, like 61.135.181.175. Could you tell me why this happen? And how do I get same ping result on Mac and Windows. Thanks

  Read the article

• How to connect a remote IP Phone to our VOIP Network?

  - by Mistiry

  We have an IP phone system in our office, and about 8 VoIP phones running on the system. We have a remote worker, who is literally states away. We'd like to connect his phone to our VoIP network, so that he has a business phone and an extension to which we could transfer calls. I was thinking, although I don't know for sure, that a pair of Cisco routers could be used in some way to make this work. I imagine a VPN solution, where I have one router connected to the phone network and the other router connected to the remote phone. Then have a site-to-site VPN set up so that the remote router... And that's where I'm stuck. I know the remote router will need to use the DHCP server of the phone system. I've never set up something like this, so I am seeking the help of the community here. What is the best way to get this remote VoIP phone RELIABLY connected to our internal VoIP network?

  Read the article

• Can't copy Ilias-folder via FQDN, but via ip-address?

  - by Lars

  I have an Ilias-Installation, which is available through two virtual hosts: the FQDN and the ip-address. The first server is ssl only, the second plain http. Both configuration files look the same except for the SSL-part: SSLEngine on SSLCertificateFile /etc/apache2/ssl/ilias.pem In the Ilias-Webinterface, I can copy a folder on the plain http. But if I try to copy the same folder on the ssl virtual host, I get the notice, that the copy was started (rough german translation here), but the folder does not show up. There are no errors in the error-logs of php or the webserver and as said, no differences beside the ssl-part. The guys at an ilias-forum did not have an idea, either. Any ideas in here?

  Read the article

• How to set up a DNS name server to always resolve to a constant IP address for every request

  - by Andy Higgins

  I am looking for a simple DNS name server set up to always return the same IP address no matter what the request is. The reason for this is we are a domain registrar and when a domain is first registered we need it to have valid name servers (and don't want to have to first create name server records before registering a domain). We will then subsequently change the name server records after the domain has been registered. I assume this is possible to do with bind but was wondering if there might be a simpler solution available using one of the more light weight name servers out there? Any suggestions on how to accomplish this in a simple manner will be appreciated.

  Read the article

• How to set which IP to use for a HTTP request?

  - by GetFree

  This is probably a silly question. I'm doing some http requests using wget from the command line, and I want those connections to be made through one specific IP of the 4 IPs my server has. Those http requests go to one specific range of IPs so I only want those to be routed differently. The 4 interfaces in my server are eth0, eth0:0, eth0:1, eth0:2. I tried with the following command: route add -net 192.164.10.0/24 dev eth0:0 But when I see the routing table it says: Destination Gateway Genmask Flags MSS Window irtt Iface 192.164.10.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 The interface is set to eth0 not eth0:0 as my command says. What am I doing wrong?

  Read the article

• Map localhost to IP address on Windows XP & Internet Explorer 7+?

  - by roblocop

  I'm trying to map 'localhost' to an IP address elsewhere on the network, say '10.0.1.1' for example. I've tried editing my hosts file, changing the entry from: 127.0.0.1 localhost to 10.0.1.1 localhost with no luck. The closest I've gotten is using DNS spoofing via Charles. Adding a DNS spoof entry mapping the host name 'localhost' to '10.0.1.1' works fine in Firefox, but fails in Internet Explorer, basically showing IE's 404 page. I'm wondering if there's some specific setting or way I can get DNS spoofing to work in IE? The main issue I'm trying to resolve is that our development environment points to 'localhost' and rather than setting the dev env up in a legacy Windows laptop to try and debug, point to a server that has it all setup and I can make the changes remotely.

  Read the article

• Windows updates behind a physical firewall with only IP based rules and generic outbound connections are turned off

  - by user125245

  I have some boxes that I do not want to allow any in or outbound traffic to the internet Except for windows updates. However the fire wall in place (Cisco ASA) apparently only supports ip based rules. As best I can tell access to Microsoft updates via anything other then the half dozen URL masks the Microsoft lists as needed does not appear possible. I have kicked around building a full WSUS that I would then manually copy the update files to so that no direct Microsoft access is needed but this sounds very top heavy for the very few boxes involved. I have also kicked around manual updates all around but am not certain how to be conveniently and confidently sure that the correct updates are being applied in the correct order. Any ideas from any direction would be appreciated. I want this as simple / cost effective as possible but have very little flexibility on the only absolutely required internet access policy.

  Read the article

• Can I use static routing to allow me to use my public IP from my LAN?

  - by jnm2

  I would like to be able to use the same hostname to connect to my computer from my phone whether I'm at home or away. Currently I have to maintain duplicate entries for remote desktop, for instance. My router doesn't seem to have a NAT loopback option. I have two routers in fact, a cable modem which goes straight to my main router which does wireless. I can add to the static routing tables on each. Can I use this to loopback the public IP or do I need different routers?

  Read the article

• Folder sync application which can sync over Internet (the other machine specified by an IP)?

  - by Adal

  I need to sync some folders between two Win 7 machines. While they are connected to the same LAN, they can't see each-other over Windows Networking since sharing is disabled on both of them (security reasons). Do you know any sync app which can work over IP? The folder I need to sync has 500,000 files in it (80 GB in total), so the sync app should be pretty efficient. At the moment I copy the files from one machine to the other over FTP, but it takes forever, since a separate connection is opened for each file. Or maybe you know some app which can efficiently transfer a large number of files between two machines on the Internet?

  Read the article

• XP Filesharing works with IP's but not computer names.

  - by Luminose

  I recently ran into a problem where I was setting up a 5 person LAN. I enabled filesharing on the main computer and wanted to allow the other 4 computers to have access. 2 computers were able to access \expample without any issues. 1 computer would only connect if I uses the ip address \x.x.x.x\data. The third computer was able to access \example but required the user to login every time they tried to access the share. Why is there such inconsistency in these connections? All 5 computers are Windows XP Professional.

  Read the article

• Can a VPN tell my country besides looking at my IP address?

  - by Tankgurl

  I VPN into a network daily. I'm currently in the USA, but will relocate soon. I am looking into buying a dedicated IP address located in the USA and setting up my router to use that from the other country. Is there a way those operating the VPN network could tell my location through whatever information their VPN sees? I already know the time/date stamp on my computer is an issue because I don't have admin rights to change it – so I'm working on a solution for that.

  Read the article

• IP Helper service uses 50-60% CPU every 1 minute for 3-4 seconds on Windows 7

  - by Sarveshwar

  I have checked everything - all the processes in the process explorer. IP Helper service is causing CPU usage of over 50 % every 1 minute for 3-4 seconds then comes back to normal. In the task manager, the process is svchost.exe and the service is iphlpsvc. Here's the result of "ipconfig /all" command: ![alt text][1] [1]: From Snapshots Here's a screenshot of "netsh interface teredo show state" command: ![alt text][1] [1]: From Snapshots Please help me resolve this. Also utorrent is not showing the teredo address.

  Read the article

• C#: How to avoid WIA-error when scanning documents with 2400dpi or more?

  - by Stephan_W

  Hello, when we scan a document with a resolution of 2400dpi or higher, we recieve (for example) the following error-message: COMException: Ausnahme von HRESULT: 0x80010100 (RPC_E_SYS_CALL_FAILED) or COMException: Ausnahme von HRESULT: 0x8021006F in one of the following lines img = itm.Transfer(scanFormat.ScanFormat) as WIA.ImageFile; img = ip.Apply(img as WIA.ImageFile); some screenshots for the mentioned errors: http://www.amarant-it.de/TempDownload/WIA_Error01.png or the same path with WIA_Error02.png and WIA_Error03.png for scanning we use the following code: #region Image-Convert-Settings //IP.Filters.Add IP.FilterInfos("Convert").FilterID //IP.Filters(1).Properties("FormatID").Value = wiaFormatJPEG WIA.IImageProcess ip = new WIA.ImageProcessClass(); object convert = "Convert"; WIA.IFilterInfo fi = ip.FilterInfos.get_Item(ref convert); ip.Filters.Add(fi.FilterID, 0); convert = "FormatID"; object formatstring = scanFormat.ScanFormat; WIA.IFilter filter; foreach (WIA.IFilter fTemp in ip.Filters) { filter = fTemp; WIA.IProperty prop = filter.Properties.get_Item(ref convert); prop.set_Value(ref formatstring); } #endregion #region Image-Scan + Convert img = itm.Transfer(scanFormat.ScanFormat) as WIA.ImageFile; img = ip.Apply(img as WIA.ImageFile); img.SaveFile("D:\\scan2." + img.FileExtension); Image image = Image.FromFile("D:\\scan2." + img.FileExtension); ilImages.Images.Add(image.ToString(), image); alImages.Add(image); if (ImageScanned != null) { ImageScanned(image); } #endregion can anyone help us with this problem? thanks

  Read the article

• Rewrite a URL that's already been redirected?

  - by Jack

  Hi guys, I'm running an Apache2 web server with a dynamic IP address. I bought exampledomain.net, and I use no-ip.com's domain-update service to redirect any visitors to my current ip address (endnote #1). For example, someone visits exampledomain.net and they get redirected to 73.181.57.34. It works like a charm. However, it isn't all that user-friendly. Can I rewrite the redirected, ip-address URL? I tried these rewrite rules in the root folder's .htaccess... RewriteEngine On RewriteCond %{HTTP_HOST} ^73\.181\.57\.34:88 RewriteRule ^(.*)$ http://www.exampledomain.net/$1 [L,NC] # I simplified the RewriteCond. I would use regex in a real situation. Of course, this creates an infinite loop. The user visits www.exampledomain.net. They're redirected to 73.181.57.34:88 by no-ip. Apache redirects them to www.exampledomain.net which redirects them back to 73.181.57.34:88... so on and so forth. I'm a noob when it comes to rewriting, but is there a way to rewrite a URL without redirecting? I tried these rewrite rules too (a shot in the dark)... RewriteEngine On RewriteCond %{HTTP_HOST} ^73\.181\.57\.34:88 RewriteRule ^(.*)$ my.exampledomain.net/$1 [L,NC] # I'd read that Apache replied with a redirect header when you include http Thanks! (1) No-IP works like this: You download and install their dynamic update client on your server. Every couple of minutes it polls your server for its current external ip address. If it's changed, it updates your server's ip address in no-ip's records.

  Read the article

• Jquery - Setting form select-field "selected" value only works after refresh

  - by frequent

  Hi, I want to use a form select-field for users to select their country of residence, which shows the IP based country as default value (plus the IP address next to it); Location info (ipinfodb.com) is working. I'm passing "country" and "ip" to the function, which should modify select-field and ip adress Problem: IP adress works, but the select-field only updates after I hit refresh. Can someone tell me why? Here is the code: HTML <select name="setup_changeCountry" id="setup_changeCountry"> <option value="AL-Albania">Albanien</option> <option value="AD-Andorra">Andorra</option> <option value="AM-Armenia">Armenien</option> <option value="AU-Australia">Australien</option> ... </select> <div class="setup_IPInfo"> <span>Your IP</span> <span class="ipAdress"> -- ip --</span> </div> Javascript/Jquery function morph(country,ip) >> passed from function, called on DOMContentLoaded { var ipAdress = ip; $('.ipAdress').text(ipAdress); var countryForm = country; $('#setup_changeCountry option').each(function() { if ($(this).val().substr(0,2) == countryForm) { $(this).attr('selected', "true"); } }); } Thanks for any clues on how to fix this. Frequent

  Read the article

• Configuring Cisco 877W router from scratch for DHCP, WiFi, ADSL2+, NAT

  - by David M Williams

  Hi all, I apologise if this is a BIG question but I am quite lost with the Cisco IOS. I know what I want to achieve just not how to do it :( I have a Cisco 877W router with 4 FastEthernet interfaces, 1 ATM interface and 1 802.11 Radio. I want to set it up for a small network and am trying to construct a configuration below. I was using Google to try and flesh it out but I think I need help and guidance from actual experts! If it helps, output from show ver says Cisco IOS software, C870 software (C870-ADVSECURITYK9-M), version 12.4(4)T7, release software (fc1) ROM: System bootstrap, version 12.3(8r)YI4, release software Here's what I have so far, which hopefully outlines clearly enough what I am wanting to do. The bits in angle brackets are placeholders (eg the secret password). ! ! Set router hostname ! hostname Shazam ! ! Set usernames and passwords ! username david privilege 15 secret 0 <PASSWORD> enable secret <SECRETPASSWORD> ! ! Configure SSH and telnet access ! line vty 0 4 privilege level 15 login local transport input telnet ssh ! ! Local logging ! logging buffered 51200 warning ! ! Set date and time for NSW, Australia (GMT +10h) ! ! ! Set router IP address to 192.168.1.1 on FastEthernet0 port ! interface FastEthernet0 ip address 192.168.1.1 255.255.255.0 no shut ip nat inside ! ! Forward any unknown DNS requests to Google ! ip dns server ip name-server 8.8.8.8 ip name-server 8.8.4.4 ! ! Set up DHCP ! DHCP pool covers 192.168.1.100 - .199 ! Set gateway and DNS server to be the router, ie 192.168.1.1 ! service dhcp ip routing ip dhcp excluded-address 192.168.1.1 192.168.1.99 ip dhcp excluded-address 192.168.1.200 192.168.1.255 ip dhcp pool <DHCPPOOLNAME> network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 dns-server 192.168.1.1 lease 7 ! ! DHCP reservations ! ! Assign IP address 192.168.1.105 to MAC address 00-21-5D-2F-58-04 ! ! Configure ADSL2 connection details ! interface atm dsl operating-mode adsl2+ ! ! Set up NAT rules ! ! Forward port 35394 to 192.168.1.105 ! ! Set up WiFi ! ! SSID visible, WPA2 security, Pre-shared key I'm hoping most of this is boiler-plate stuff to you guys. I'm keen to not just get a working script but to actually understand it also. Unfortunately, I'm finding the Cisco reference material online very complex. Thank you!

  Read the article

• Cisco ASA (Client VPN) to LAN - through second VPN to second LAN

  - by user50855

  We have 2 site that is linked by an IPSEC VPN to remote Cisco ASAs: Site 1 1.5Mb T1 Connection Cisco(1) 2841 Site 2 1.5Mb T1 Connection Cisco 2841 In addition: Site 1 has a 2nd WAN 3Mb bonded T1 Connection Cisco 5510 that connects to same LAN as Cisco(1) 2841. Basically, Remote Access (VPN) users connecting through Cisco ASA 5510 needs access to a service at the end of Site 2. This is due to the way the service is sold - Cisco 2841 routers are not under our management and it is setup to allow connection from local LAN VLAN 1 IP address 10.20.0.0/24. My idea is to have all traffic from Remote Users through Cisco ASA destined for Site 2 to go via the VPN between Site 1 and Site 2. The end result being all traffic that hits Site 2 has come via Site 1. I'm struggling to find a great deal of information on how this is setup. So, firstly, can anyone confirm that what I'm trying to achieve is possible? Secondly, can anyone help me to correct the configuration bellow or point me in the direction of an example of such a configuration? Many Thanks. interface Ethernet0/0 nameif outside security-level 0 ip address 7.7.7.19 255.255.255.240 interface Ethernet0/1 nameif inside security-level 100 ip address 10.20.0.249 255.255.255.0 object-group network group-inside-vpnclient description All inside networks accessible to vpn clients network-object 10.20.0.0 255.255.255.0 network-object 10.20.1.0 255.255.255.0 object-group network group-adp-network description ADP IP Address or network accessible to vpn clients network-object 207.207.207.173 255.255.255.255 access-list outside_access_in extended permit icmp any any echo-reply access-list outside_access_in extended permit icmp any any source-quench access-list outside_access_in extended permit icmp any any unreachable access-list outside_access_in extended permit icmp any any time-exceeded access-list outside_access_in extended permit tcp any host 7.7.7.20 eq smtp access-list outside_access_in extended permit tcp any host 7.7.7.20 eq https access-list outside_access_in extended permit tcp any host 7.7.7.20 eq pop3 access-list outside_access_in extended permit tcp any host 7.7.7.20 eq www access-list outside_access_in extended permit tcp any host 7.7.7.21 eq www access-list outside_access_in extended permit tcp any host 7.7.7.21 eq https access-list outside_access_in extended permit tcp any host 7.7.7.21 eq 5721 access-list acl-vpnclient extended permit ip object-group group-inside-vpnclient any access-list acl-vpnclient extended permit ip object-group group-inside-vpnclient object-group group-adp-network access-list acl-vpnclient extended permit ip object-group group-adp-network object-group group-inside-vpnclient access-list PinesFLVPNTunnel_splitTunnelAcl standard permit 10.20.0.0 255.255.255.0 access-list inside_nat0_outbound_1 extended permit ip 10.20.0.0 255.255.255.0 10.20.1.0 255.255.255.0 access-list inside_nat0_outbound_1 extended permit ip 10.20.0.0 255.255.255.0 host 207.207.207.173 access-list inside_nat0_outbound_1 extended permit ip 10.20.1.0 255.255.255.0 host 207.207.207.173 ip local pool VPNPool 10.20.1.100-10.20.1.200 mask 255.255.255.0 route outside 0.0.0.0 0.0.0.0 7.7.7.17 1 route inside 207.207.207.173 255.255.255.255 10.20.0.3 1 crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto dynamic-map outside_dyn_map 20 set security-association lifetime seconds 288000 crypto dynamic-map outside_dyn_map 20 set security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set reverse-route crypto map outside_map 20 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto map outside_dyn_map 20 match address acl-vpnclient crypto map outside_dyn_map 20 set security-association lifetime seconds 28800 crypto map outside_dyn_map 20 set security-association lifetime kilobytes 4608000 crypto isakmp identity address crypto isakmp enable outside crypto isakmp policy 20 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 group-policy YeahRightflVPNTunnel internal group-policy YeahRightflVPNTunnel attributes wins-server value 10.20.0.9 dns-server value 10.20.0.9 vpn-tunnel-protocol IPSec password-storage disable pfs disable split-tunnel-policy tunnelspecified split-tunnel-network-list value acl-vpnclient default-domain value YeahRight.com group-policy YeahRightFLVPNTunnel internal group-policy YeahRightFLVPNTunnel attributes wins-server value 10.20.0.9 dns-server value 10.20.0.9 10.20.0.7 vpn-tunnel-protocol IPSec split-tunnel-policy tunnelspecified split-tunnel-network-list value YeahRightFLVPNTunnel_splitTunnelAcl default-domain value yeahright.com tunnel-group YeahRightFLVPN type remote-access tunnel-group YeahRightFLVPN general-attributes address-pool VPNPool tunnel-group YeahRightFLVPNTunnel type remote-access tunnel-group YeahRightFLVPNTunnel general-attributes address-pool VPNPool authentication-server-group WinRadius default-group-policy YeahRightFLVPNTunnel tunnel-group YeahRightFLVPNTunnel ipsec-attributes pre-shared-key *

  Read the article

• Tunnel is up but cannot ping directly connected network

  - by drmanalo

  We configured a site-to-site VPN and here is the topology. I control the network on the left but not the one on the right. All devices in our network has public IPs. Server---ASA5505---Cisco887======Internet=====ASA5510---devices I can see the tunnel is up and can do extended ping using a loopback interface. From the 10.175 and 10.165 networks, they can also ping my loopback address. I can also dial in using a Cisco VPN client, and can connect to the devices on the right. #show crypto session Crypto session current status Interface: Vlan3 Profile: xxx-profile Session status: UP-ACTIVE Peer: 213.121.x.x port 500 IKEv1 SA: local 77.245.x.x/500 remote 213.121.x.x/500 Active IPSEC FLOW: permit ip 10.0.20.0/255.255.255.240 10.175.0.0/255.255.128.0 Active SAs: 0, origin: crypto map IPSEC FLOW: permit ip 10.0.20.0/255.255.255.240 10.165.0.0/255.255.192.0 Active SAs: 2, origin: crypto map #ping 10.165.29.39 source loopback 2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.165.29.39, timeout is 2 seconds: Packet sent with a source address of 10.0.20.1 !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 16/17/20 ms My problem is the devices on the right cannot reach my server. They could only ping the loopback address and nothing else. I'm pasting some diagnostics related to routing thinking perhaps routing is my issue. I can paste all the running-config on my side of network if needed. #show ip int brief Interface IP-Address OK? Method Status Protocol ATM0 unassigned YES NVRAM administratively down down Ethernet0 unassigned YES NVRAM administratively down down FastEthernet0 unassigned YES unset up up connected to ASA FastEthernet1 unassigned YES unset administratively down down FastEthernet2 unassigned YES unset administratively down down FastEthernet3 unassigned YES unset up up Loopback1 10.0.20.65 YES NVRAM up up Loopback2 10.0.20.1 YES NVRAM up up Virtual-Template1 77.245.x.x YES unset up down Virtual-Template2 77.245.x.x YES unset up down Vlan1 unassigned YES unset down down Vlan3 77.245.x.x YES NVRAM up up connected to the Internet #show run | section ip route ip route 0.0.0.0 0.0.0.0 77.245.x.x ip route 213.121.240.36 255.255.255.255 Vlan3 #show access-list Extended IP access list 102 10 permit ip 10.0.20.0 0.0.0.15 10.175.0.0 0.0.127.255 (3332 matches) 20 permit ip 10.0.20.0 0.0.0.15 10.165.0.0 0.0.63.255 (3498 matches) #show vlan-switch VLAN Name Status Ports ---- -------------------------------- --------- ------------------------------- 1 default active 3 VLAN0003 active Fa0, Fa1, Fa2, Fa3 1002 fddi-default act/unsup 1003 token-ring-default act/unsup 1004 fddinet-default act/unsup 1005 trnet-default act/unsup #show ip route Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP + - replicated route, % - next hop override Gateway of last resort is 77.245.x.x to network 0.0.0.0 S* 0.0.0.0/0 [1/0] via 77.245.x.x 10.0.0.0/8 is variably subnetted, 5 subnets, 3 masks C 10.0.20.0/28 is directly connected, Loopback2 L 10.0.20.1/32 is directly connected, Loopback2 C 10.0.20.64/28 is directly connected, Loopback1 L 10.0.20.65/32 is directly connected, Loopback1 S 10.165.0.0/18 [1/0] via 213.121.x.x 77.0.0.0/8 is variably subnetted, 3 subnets, 3 masks S 77.0.0.0/8 [1/0] via 77.245.x.x C 77.245.x.x/29 is directly connected, Vlan3 L 77.245.x.x/32 is directly connected, Vlan3 213.121.x.0/32 is subnetted, 1 subnets S 213.121.x.x is directly connected, Vlan3 I read some of the posts here which lead to NATing issue but I'not sure of my next step. Should I translate my public address to private and route it to the loopback address? (only guessing) CISCO VPN site to site Site-to-Site VPN between two ASA 5505s only working in one direction Hope someone could help. Thanks in advance!

  Read the article

• Cloudformation with Ubuntu throwing errors

  - by Sammaye

  I have been doing some reading and have come to the understanding that if you wish to use a launchConfig with Ubuntu you will need to install the cfn-init file yourself which I have done: "Properties" : { "KeyName" : { "Ref" : "KeyName" }, "SpotPrice" : "0.05", "ImageId" : { "Fn::FindInMap" : [ "AWSRegionArch2AMI", { "Ref" : "AWS::Region" }, { "Fn::FindInMap" : [ "AWSInstanceType2Arch", { "Ref" : "InstanceType" }, "Arch" ] } ] }, "SecurityGroups" : [ { "Ref" : "InstanceSecurityGroup" } ], "InstanceType" : { "Ref" : "InstanceType" }, "UserData" : { "Fn::Base64" : { "Fn::Join" : ["", [ "#!/bin/bash\n", "apt-get -y install python-setuptools\n", "easy_install https://s3.amazonaws.com/cloudformation-examples/aws-cfn-bootstrap-1.0-6.tar.gz\n", "cfn-init ", " --stack ", { "Ref" : "AWS::StackName" }, " --resource LaunchConfig ", " --configset ALL", " --access-key ", { "Ref" : "WorkerKeys" }, " --secret-key ", {"Fn::GetAtt": ["WorkerKeys", "SecretAccessKey"]}, " --region ", { "Ref" : "AWS::Region" }, " || error_exit 'Failed to run cfn-init'\n" ]]}} But I have a problem with this setup that I cannot seem to get a decent answer to. I keep getting this error in the logs: Jun 15 12:02:34 ip-0 [CLOUDINIT] __init__.py[DEBUG]: config-scripts-per-once already ran once Jun 15 12:02:34 ip-0 [CLOUDINIT] __init__.py[DEBUG]: handling scripts-per-boot with freq=None and args=[] Jun 15 12:02:34 ip-0 [CLOUDINIT] __init__.py[DEBUG]: handling scripts-per-instance with freq=None and args=[] Jun 15 12:02:34 ip-0 [CLOUDINIT] __init__.py[DEBUG]: handling scripts-user with freq=None and args=[] Jun 15 12:02:34 ip-0 [CLOUDINIT] cc_scripts_user.py[WARNING]: failed to run-parts in /var/lib/cloud/instance/scripts Jun 15 12:02:34 ip-0 [CLOUDINIT] __init__.py[WARNING]: Traceback (most recent call last):#012 File "/usr/lib/python2.7/dist-packages/cloudinit/CloudConfig/__init__.py", line 117, in run_cc_modules#012 cc.handle(name, run_args, freq=freq)#012 File "/usr/lib/python2.7/dist-packages/cloudinit/CloudConfig/__init__.py", line 78, in handle#012 [name, self.cfg, self.cloud, cloudinit.log, args])#012 File "/usr/lib/python2.7/dist-packages/cloudinit/__init__.py", line 326, in sem_and_run#012 func(*args)#012 File "/usr/lib/python2.7/dist-packages/cloudinit/CloudConfig/cc_scripts_user.py", line 31, in handle#012 util.runparts(runparts_path)#012 File "/usr/lib/python2.7/dist-packages/cloudinit/util.py", line 223, in runparts#012 raise RuntimeError('runparts: %i failures' % failed)#012RuntimeError: runparts: 1 failures Jun 15 12:02:34 ip-0 [CLOUDINIT] __init__.py[ERROR]: config handling of scripts-user, None, [] failed Jun 15 12:02:34 ip-0 [CLOUDINIT] __init__.py[DEBUG]: handling keys-to-console with freq=None and args=[] Jun 15 12:02:34 ip-0 [CLOUDINIT] __init__.py[DEBUG]: handling phone-home with freq=None and args=[] Jun 15 12:02:34 ip-0 [CLOUDINIT] __init__.py[DEBUG]: handling final-message with freq=None and args=[] Jun 15 12:02:34 ip-0 [CLOUDINIT] cloud-init-cfg[ERROR]: errors running cloud_config [final]: ['scripts-user'] I have absolutely no idea what scripts-user means and Google is not helping much here either. I can, when I ssh into the server, see that it runs the userdata script since I can access cfn-init as a command whereas I cannot in the original AMI the instance is made from. However I have a launchConfig: "Comment" : "Install a simple PHP application", "AWS::CloudFormation::Init" : { "configSets" : { "ALL" : ["WorkerRole"] }, "WorkerRole" : { "files" : { "/etc/cron.d/worker.cron" : { "content" : "*/1 * * * * ubuntu /home/ubuntu/worker_cron.php &> /home/ubuntu/worker.log\n", "mode" : "000644", "owner" : "root", "group" : "root" }, "/home/ubuntu/worker_cron.php" : { "content" : { "Fn::Join" : ["", [ "#!/usr/bin/env php", "<?php", "define('ROOT', dirname(__FILE__));", "const AWS_KEY = \"", { "Ref" : "WorkerKeys" }, "\";", "const AWS_SECRET = \"", { "Fn::GetAtt": ["WorkerKeys", "SecretAccessKey"]}, "\";", "const QUEUE = \"", { "Ref" : "InputQueue" }, "\";", "exec('git clone x '.ROOT.'/worker');", "if(!file_exists(ROOT.'/worker/worker_despatcher.php')){", "echo 'git not downloaded right';", "exit();", "}", "echo 'git downloaded';", "include_once ROOT.'/worker/worker_despatcher.php';" ]]}, "mode" : "000755", "owner" : "ubuntu", "group" : "ubuntu" } } } } Which does not seem to run at all. I have checked for the files existance in my home directory and it's not there. I have checked for the cronjob entry and it's not there either. I cannot, after reading through the documentation, seem to see what's potentially wrong with my code. Any thoughts on why this is not working? Am I missing something blatant?

  Read the article

• How should I update my name server after I installed a new dedicated server?

  - by Jim Thio

  Say I got a dedi. The IP is 123.123.123.123 Now I got domain name domainname.com that will be the "main" domain name for that server. Should I? Set the name server of the domainname.com to ns1.domainname.com and ns2.domainname.com Add child nameserver ns1.domainname.com and ns2.domainname.com to point to that exact IP. or Should I? Point the name server to my registrar name server. Set an A address of the name server to point to my IP. Which one is right? Obviously I want ns1.domainname.com and ns2.domainname.com to point to my IP so I can then point hundreds of domains to that IP. But how exactly I should do that? Specifically I simply use cpanel. Centosh with cpanel.

  Read the article

• Ping.eu

  - by Sarang

  Found an interesting resource thanks to a close friend. Ping.eu is a free service which would let you test various aspects related to networks which would typically be pain inducing doing it on your own. For seasoned network professional having a MAC address of their own instead of a name :) this might not be that useful. However for a layperson like me this an invaluable resource. These guys provide you with following services: Ping – Shows how long it takes for packets to reach host Traceroute – Traces the route of packets to destination host from our server DNS lookup – Look up DNS record WHOIS – Lists contact info for an IP or domain Port check – Tests if port is opened on specified IP Reverse lookup – Gets hostname by IP address Proxy checker – Detects a proxy server Mail relaying – Tests relaying capabilities of specified mail-server Bandwidth meter – Detects your download speed from our server Network calculator – Calculates subnet range by network mask Network mask calculator – Calculates network mask by subnet range Country by IP – Detects country by IP or hostname Unit converter – Converts values from one unit to another   Taken straight from their site. Thanks Ping.eu

  Read the article

• fail2ban custom action to permanent ban IPs from China

  - by John Magnolia

  When a IP address gets banned how can I check if the banned IP address is from China. If yes, then add it to the permanent ban list. I have found this nice guide which write the banned IP to file. Reason: I am getting a lot of brute force attacks from China daily, thankfully fail2ban is helping restrict this although they appear to be getting worse and they are just changing their IP Address. Or even better would be if there was a maintained database of known hacker IP addresses. Example 1 Hi, The IP 60.169.78.77 has just been banned by Fail2Ban after 4 attempts against vsftpd. Here are more information about 60.169.78.77: % [whois.apnic.net node-7] % Whois data copyright terms http://www.apnic.net/db/dbcopyright.html inetnum: 60.166.0.0 - 60.175.255.255 netname: CHINANET-AH descr: CHINANET anhui province network descr: China Telecom descr: A12,Xin-Jie-Kou-Wai Street descr: Beijing 100088 country: CN admin-c: CH93-AP tech-c: JW89-AP mnt-by: APNIC-HM mnt-routes: MAINT-CHINANET-AH mnt-lower: MAINT-CHINANET-AH status: ALLOCATED PORTABLE changed: [email protected] 20040721 source: APNIC person: Chinanet Hostmaster nic-hdl: CH93-AP e-mail: [email protected] address: No.31 ,jingrong street,beijing address: 100032 phone: +86-10-58501724 fax-no: +86-10-58501724 country: CN changed: [email protected] 20070416 mnt-by: MAINT-CHINANET source: APNIC person: Jinneng Wang address: 17/F, Postal Building No.120 Changjiang address: Middle Road, Hefei, Anhui, China country: CN phone: +86-551-2659073 fax-no: +86-551-2659287 e-mail: [email protected] nic-hdl: JW89-AP mnt-by: MAINT-NEW changed: [email protected] 19990818 source: APNIC Regards, Fail2Ban Example 2 Hi, The IP 60.169.78.81 has just been banned by Fail2Ban after 4 attempts against vsftpd. Here are more information about 60.169.78.81: % [whois.apnic.net node-6] % Whois data copyright terms http://www.apnic.net/db/dbcopyright.html inetnum: 60.166.0.0 - 60.175.255.255 netname: CHINANET-AH descr: CHINANET anhui province network descr: China Telecom descr: A12,Xin-Jie-Kou-Wai Street descr: Beijing 100088 country: CN admin-c: CH93-AP tech-c: JW89-AP mnt-by: APNIC-HM mnt-routes: MAINT-CHINANET-AH mnt-lower: MAINT-CHINANET-AH status: ALLOCATED PORTABLE changed: [email protected] 20040721 source: APNIC person: Chinanet Hostmaster nic-hdl: CH93-AP e-mail: [email protected] address: No.31 ,jingrong street,beijing address: 100032 phone: +86-10-58501724 fax-no: +86-10-58501724 country: CN changed: [email protected] 20070416 mnt-by: MAINT-CHINANET source: APNIC person: Jinneng Wang address: 17/F, Postal Building No.120 Changjiang address: Middle Road, Hefei, Anhui, China country: CN phone: +86-551-2659073 fax-no: +86-551-2659287 e-mail: [email protected] nic-hdl: JW89-AP mnt-by: MAINT-NEW changed: [email protected] 19990818 source: APNIC Regards, Fail2Ban Example 3 Hi, The IP 222.133.244.99 has just been banned by Fail2Ban after 4 attempts against vsftpd. Here are more information about 222.133.244.99: % [whois.apnic.net node-6] % Whois data copyright terms http://www.apnic.net/db/dbcopyright.html inetnum: 222.133.244.96 - 222.133.244.127 netname: LCZFFHQ country: CN descr: liaochenggovermentfanghuoqiang admin-c: DS95-AP tech-c: DS95-AP status: ASSIGNED NON-PORTABLE changed: [email protected] 20060122 mnt-by: MAINT-CNCGROUP-SD source: APNIC route: 222.132.0.0/14 descr: CNC Group CHINA169 Shandong Province Network country: CN origin: AS4837 mnt-by: MAINT-CNCGROUP-RR changed: [email protected] 20060118 source: APNIC person: Data Communication Bureau Shandong nic-hdl: DS95-AP e-mail: [email protected] address: No.77 Jingsan Road,Jinan,Shandong,P.R.China phone: +86-531-6052611 fax-no: +86-531-6052414 country: CN changed: [email protected] 20050330 mnt-by: MAINT-CNCGROUP-SD source: APNIC Regards, Fail2Ban

  Read the article

• How to share internet connection and making the client accessible over the lan

  - by Dario Silva Moran

  I've a Pc with Ubuntu 14.04 connected to a linkys router through wlan0, and I'd like to share internet connection to an AVR with ethernet port. This is pretty simple if only internet connection is required for the AVR: actually, creating an ethernet connection as "Shared with other computers" and setting up the AVR IP configuration to use DHCP works just fine, but that makes a private class A lan between those two; of course ip addresses are not in the range of the LAN the router is managing. So, I tried with static ip on both sides (Ubuntu eth0 and AVR ip). Tried many combinations, none of them work to provide Internet access to the AVR and at the same time make the AVR accessible over the network through his static ip address (say, 192.168.0.110). Any tips around to share??

  Read the article

• OpenVPN - client-to-client traffic working in one direction but not the other

  - by user42055

  I have the following VPN configuration: +------------+ +------------+ +------------+ | outpost |----------------| kino |----------------| guchuko | +------------+ +------------+ +------------+ OS: FreeBSD 6.2 OS: Gentoo 2.6.32 OS: Gentoo 2.6.33.3 Keyname: client3 Keyname: server Keyname: client1 eth0: 10.0.1.254 eth0: 203.x.x.x eth0: 192.168.0.6 tun0: 192.168.150.18 tun0: 192.168.150.1 tun0: 192.168.150.10 P-t-P: 192.166.150.17 P-t-P: 192.168.150.2 P-t-P: 192.168.150.9 Kino is the server and has client-to-client enabled. All three machines have ip forwarding enabled, by this on the gentoo boxes: net.ipv4.conf.all.forwarding = 1 And this on the FreeBSD box: net.inet.ip.forwarding: 1 In the server's "ccd" directory is the following files: client1: iroute 192.168.0.0 255.255.255.0 client3: iroute 10.0.1.0 255.255.255.0 The server config has these routes configured: push "route 192.168.0.0 255.255.255.0" push "route 10.0.1.0 255.255.255.0" route 192.168.0.0 255.255.255.0 route 10.0.1.0 255.255.255.0 Kino's routing table looks like this: 192.168.150.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 10.0.1.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 192.168.0.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 192.168.150.2 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 Outpost's like this: 192.168.150 192.168.150.17 UGS 0 17 tun0 192.168.0 192.168.150.17 UGS 0 2 tun0 192.168.150.17 192.168.150.18 UH 3 0 tun0 And Guchuko's like this: 192.168.150.0 192.168.150.9 255.255.255.0 UG 0 0 0 tun0 10.0.1.0 192.168.150.9 255.255.255.0 UG 0 0 0 tun0 192.168.150.9 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 Now, the tests. Pings from Guchuko to Outpost's LAN IP work OK, as does the reverse - pings from Outpost to Guchuko's LAN IP. However... Pings from Outpost, to a machine on Guchuko's LAN work fine: .(( root@outpost )). (( 06:39 PM )) :: ~ :: # ping 192.168.0.3 PING 192.168.0.3 (192.168.0.3): 56 data bytes 64 bytes from 192.168.0.3: icmp_seq=0 ttl=63 time=462.641 ms 64 bytes from 192.168.0.3: icmp_seq=1 ttl=63 time=557.909 ms But a ping from Guchuko, to a machine on Outpost's LAN does not: .(( root@guchuko )). (( 06:43 PM )) :: ~ :: # ping 10.0.1.253 PING 10.0.1.253 (10.0.1.253) 56(84) bytes of data. --- 10.0.1.253 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2000ms Guchuko's tcpdump of tun0 shows: 18:46:27.716931 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 1, length 64 18:46:28.716715 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 2, length 64 18:46:29.716714 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 3, length 64 Outpost's tcpdump on tun0 shows: 18:44:00.333341 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 3, length 64 18:44:01.334073 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 4, length 64 18:44:02.331849 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 5, length 64 So Outpost is receiving the ICMP request destined for the machine on it's subnet, but appears not be forwarding it. Outpost has gateway_enable="YES" in its rc.conf which correctly sets net.inet.ip.forwarding to 1 as mentioned earlier. As far as I know, that's all that's required to make a FreeBSD box forward packets between interfaces. Is there something else I could be forgetting ?

  Read the article

• ERROR CHECKING !!

  - by moata_u

  am trying catch any error when run command in order to write an log file / report i was trying write this code : FUNCTION FOR VALIDATION function valid (){ if [ $? -eq 0 ]; then echo "$var1" ": status : OK" else echo "$var1" ": status : ERROR" fi COMMAND FUNCTION function save(){ sed -i "/:@/c connection.url=jdbc:oracle:thin:@$ip:1521:$dataBase" $search var1="adding database ip" valid $var1 sed -i "/connection.username/c connection.username=$name" #$search retval=$? var1="addning database SID" valid $var1 $retval } save OUTPUT adding database ip : status : OK sed: no input file i want out put in this way: adding database ip : status : OK sed: no input file : status : ERROR" (OR) adding database ip : status : OK addning database SID : status : ERROR" I was tried toooo much but not working with me :(((

  Read the article

< Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >