Search Results

Search found 14624 results on 585 pages for 'static'.

Page 104/585 | < Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >

• Inbound SIP calls through Cisco 881 NAT hang up after a few seconds

  - by MasterRoot24

  I've recently moved to a Cisco 881 router for my WAN link. I was previously using a Cisco Linksys WAG320N as my modem/router/WiFi AP/NAT firewall. The WAG320N is now running in bridged mode, so it's simply acting as a modem with one of it's LAN ports connected to FE4 WAN on my Cisco 881. The Cisco 881 get's a DHCP provided IP from my ISP. My LAN is part of default Vlan 1 (192.168.1.0/24). General internet connectivity is working great, I've managed to setup static NAT rules for my HTTP/HTTPS/SMTP/etc. services which are running on my LAN. I don't know whether it's worth mentioning that I've opted to use NVI NAT (ip nat enable as opposed to the traditional ip nat outside/ip nat inside) setup. My reason for this is that NVI allows NAT loopback from my LAN to the WAN IP and back in to the necessary server on the LAN. I run an Asterisk 1.8 PBX on my LAN, which connects to a SIP provider on the internet. Both inbound and outbound calls through the old setup (WAG320N providing routing/NAT) worked fine. However, since moving to the Cisco 881, inbound calls drop after around 10 seconds, whereas outbound calls work fine. The following message is logged on my Asterisk PBX: [Dec 9 15:27:45] WARNING[27734]: chan_sip.c:3641 retrans_pkt: Retransmission timeout reached on transmission [email protected] for seqno 1 (Critical Response) -- See https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions Packet timed out after 6528ms with no response [Dec 9 15:27:45] WARNING[27734]: chan_sip.c:3670 retrans_pkt: Hanging up call [email protected] - no reply to our critical packet (see https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions). (I know that this is quite a common issue - I've spend the best part of 2 days solid on this, trawling Google.) I've done as I am told and checked https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions. Referring to the section "Other SIP requests" in the page linked above, I believe that the hangup to be caused by the ACK from my SIP provider not being passed back through NAT to Asterisk on my PBX. I tried to ascertain this by dumping the packets on my WAN interface on the 881. I managed to obtain a PCAP dump of packets in/out of my WAN interface. Here's an example of an ACK being reveived by the router from my provider: 689 21.219999 193.x.x.x 188.x.x.x SIP 502 Request: ACK sip:[email protected] | However a SIP trace on the Asterisk server show's that there are no ACK's received in response to the 200 OK from my PBX: http://pastebin.com/wwHpLPPz In the past, I have been strongly advised to disable any sort of SIP ALGs on routers and/or firewalls and the many posts regarding this issue on the internet seem to support this. However, I believe on Cisco IOS, the config command to disable SIP ALG is no ip nat service sip udp port 5060 however, this doesn't appear to help the situation. To confirm that config setting is set: Router1#show running-config | include sip no ip nat service sip udp port 5060 Another interesting twist: for a short period of time, I tried another provider. Luckily, my trial account with them is still available, so I reverted my Asterisk config back to the revision before I integrated with my current provider. I then dialled in to the DDI associated with the trial trunk and the call didn't get hung up and I didn't get the error above! To me, this points at the provider, however I know, like all providers do, will say "There's no issues with our SIP proxies - it's your firewall." I'm tempted to agree with this, as this issue was not apparent with the old WAG320N router when it was doing the NAT'ing. I'm sure you'll want to see my running-config too: ! ! Last configuration change at 15:55:07 UTC Sun Dec 9 2012 by xxx version 15.2 no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec localtime show-timezone service timestamps log datetime msec localtime show-timezone no service password-encryption service sequence-numbers ! hostname Router1 ! boot-start-marker boot-end-marker ! ! security authentication failure rate 10 log security passwords min-length 6 logging buffered 4096 logging console critical enable secret 4 xxx ! aaa new-model ! ! aaa authentication login local_auth local ! ! ! ! ! aaa session-id common ! memory-size iomem 10 ! crypto pki trustpoint TP-self-signed-xxx enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-xxx revocation-check none rsakeypair TP-self-signed-xxx ! ! crypto pki certificate chain TP-self-signed-xxx certificate self-signed 01 quit no ip source-route no ip gratuitous-arps ip auth-proxy max-login-attempts 5 ip admission max-login-attempts 5 ! ! ! ! ! no ip bootp server ip domain name dmz.merlin.local ip domain list dmz.merlin.local ip domain list merlin.local ip name-server x.x.x.x ip inspect audit-trail ip inspect udp idle-time 1800 ip inspect dns-timeout 7 ip inspect tcp idle-time 14400 ip inspect name autosec_inspect ftp timeout 3600 ip inspect name autosec_inspect http timeout 3600 ip inspect name autosec_inspect rcmd timeout 3600 ip inspect name autosec_inspect realaudio timeout 3600 ip inspect name autosec_inspect smtp timeout 3600 ip inspect name autosec_inspect tftp timeout 30 ip inspect name autosec_inspect udp timeout 15 ip inspect name autosec_inspect tcp timeout 3600 ip cef login block-for 3 attempts 3 within 3 no ipv6 cef ! ! multilink bundle-name authenticated license udi pid CISCO881-SEC-K9 sn ! ! username xxx privilege 15 secret 4 xxx username xxx secret 4 xxx ! ! ! ! ! ip ssh time-out 60 ! ! ! ! ! ! ! ! ! interface FastEthernet0 no ip address ! interface FastEthernet1 no ip address ! interface FastEthernet2 no ip address ! interface FastEthernet3 switchport access vlan 2 no ip address ! interface FastEthernet4 ip address dhcp no ip redirects no ip unreachables no ip proxy-arp ip nat enable duplex auto speed auto ! interface Vlan1 ip address 192.168.1.1 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip nat enable ! interface Vlan2 ip address 192.168.0.2 255.255.255.0 ! ip forward-protocol nd ip http server ip http access-class 1 ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ! ! no ip nat service sip udp port 5060 ip nat source list 1 interface FastEthernet4 overload ip nat source static tcp x.x.x.x 80 interface FastEthernet4 80 ip nat source static tcp x.x.x.x 443 interface FastEthernet4 443 ip nat source static tcp x.x.x.x 25 interface FastEthernet4 25 ip nat source static tcp x.x.x.x 587 interface FastEthernet4 587 ip nat source static tcp x.x.x.x 143 interface FastEthernet4 143 ip nat source static tcp x.x.x.x 993 interface FastEthernet4 993 ip nat source static tcp x.x.x.x 1723 interface FastEthernet4 1723 ! ! logging trap debugging logging facility local2 access-list 1 permit 192.168.1.0 0.0.0.255 access-list 1 permit 192.168.0.0 0.0.0.255 no cdp run ! ! ! ! control-plane ! ! banner motd Authorized Access only ! line con 0 login authentication local_auth length 0 transport output all line aux 0 exec-timeout 15 0 login authentication local_auth transport output all line vty 0 1 access-class 1 in logging synchronous login authentication local_auth length 0 transport preferred none transport input telnet transport output all line vty 2 4 access-class 1 in login authentication local_auth length 0 transport input ssh transport output all ! ! end ...and, if it's of any use, here's my Asterisk SIP config: [general] context=default ; Default context for calls allowoverlap=no ; Disable overlap dialing support. (Default is yes) udpbindaddr=0.0.0.0 ; IP address to bind UDP listen socket to (0.0.0.0 binds to all) ; Optionally add a port number, 192.168.1.1:5062 (default is port 5060) tcpenable=no ; Enable server for incoming TCP connections (default is no) tcpbindaddr=0.0.0.0 ; IP address for TCP server to bind to (0.0.0.0 binds to all interfaces) ; Optionally add a port number, 192.168.1.1:5062 (default is port 5060) srvlookup=yes ; Enable DNS SRV lookups on outbound calls ; Note: Asterisk only uses the first host ; in SRV records ; Disabling DNS SRV lookups disables the ; ability to place SIP calls based on domain ; names to some other SIP users on the Internet ; Specifying a port in a SIP peer definition or ; when dialing outbound calls will supress SRV ; lookups for that peer or call. directmedia=no ; Don't allow direct RTP media between extensions (doesn't work through NAT) externhost=<MY DYNDNS HOSTNAME> ; Our external hostname to resolve to IP and be used in NAT'ed packets localnet=192.168.1.0/24 ; Define our local network so we know which packets need NAT'ing qualify=yes ; Qualify peers by default dtmfmode=rfc2833 ; Set the default DTMF mode disallow=all ; Disallow all codecs by default allow=ulaw ; Allow G.711 u-law allow=alaw ; Allow G.711 a-law ; ---------------------- ; SIP Trunk Registration ; ---------------------- ; Orbtalk register => <MY SIP PROVIDER USER NAME>:[email protected]/<MY DDI> ; Main Orbtalk number ; ---------- ; Trunks ; ---------- [orbtalk] ; Main Orbtalk trunk type=peer insecure=invite host=sipgw3.orbtalk.co.uk nat=yes username=<MY SIP PROVIDER USER NAME> defaultuser=<MY SIP PROVIDER USER NAME> fromuser=<MY SIP PROVIDER USER NAME> secret=xxx context=inbound I really don't know where to go with this. If anyone can help me find out why these calls are being dropped off, I'd be grateful if you could chime in! Please let me know if any further info is required.

  Read the article

• netconfig won't change DNS on opensuse 12.2

  - by Krystian

  I'm trying to update my dns servers after openvpn connection, but netconfig won't do that for me. Here's how I'm trying to do it [manually now]: /sbin/netconfig modify -v -i tap0 -s openvpn <<-EOF INTERFACE='tap0' DNSSERVERS='10.10.0.1' EOF And here's the verbose output: debug: lockfile created (/var/run/netconfig.pid) for PID 5530 debug: lockfile created debug: write new STATE file /var/run/netconfig//tap0/netconfig0 debug: Module order: dns-resolver dns-bind dns-dnsmasq nis ntp-runtime debug: dns-resolver module called debug: Static Fallback debug: Use NetworkManager policy merged settings debug: exec get_dns_settings: /var/run/netconfig/NetworkManager.netconfig debug: get_dns_settings: service 'NetworkManager' => rank '1' debug: get_dns_settings: DNS_SEARCHLIST_1='mydomain.com' debug: get_dns_settings: DNS_SERVERS_1='192.168.0.1' debug: exit get_dns_settings: /var/run/netconfig/NetworkManager.netconfig debug: write_resolv_conf: ' mydomain.com ' ' 192.168.0.1 ' debug: No changes for /etc/resolv.conf debug: dns-bind Module called debug: dns-dnsmasq Module called debug: nis Module called debug: Static Fallback debug: Use NetworkManager policy merged settings debug: exec get_nis_settings: /var/run/netconfig/NetworkManager.netconfig debug: exit get_nis_settings: /var/run/netconfig/NetworkManager.netconfig debug: set_nisdomainname: eth0 24 debug: set_nisdomainname: => yes debug: set_nisdomainname: old[]=, new[24]= debug: format_yp_conf called with : debug: Using static fallback debug: format_static[0] called debug: No changes for /etc/yp.conf debug: nis domainname '' is up to date debug: ntp-runtime Module called debug: Static Fallback debug: Use NetworkManager policy merged settings debug: exec get_ntp_settings: /var/run/netconfig/NetworkManager.netconfig debug: get_ntp_settings: NTP_SERVER_LIST='' debug: exit get_ntp_settings: /var/run/netconfig/NetworkManager.netconfig I've been trying to find something relevant on the web, but failed to do so. I have no other clue on how to progress with this issue. Any thoughts?

  Read the article

• Second ip address on same interface CentOS 6.3

  - by user16081

  I tried to add a second LAN addresses in CentOS 6.3 on a brand new install and it's not working. I installed a new copy of CentOS 5.7 and tried the same and it worked right away. Now I'm just trying to setup the alias on the same subnet and it's not working. what am i doing wrong, is this not possible on CentOS 6.3? second ip address on the same interface but on a different subnet CentOS 5.7 it works: DEVICE=eth0 BOOTPROTO=static BROADCAST=192.168.0.255 HWADDR=00:0C:29:01:6F:89 IPADDR=192.168.0.167 NETMASK=255.255.255.0 NETWORK=192.168.0.0 ONBOOT=yes DEVICE=eth0:0 BOOTPROTO=static BROADCAST=192.168.0.255 HWADDR=00:0C:29:01:6F:89 IPADDR=192.168.0.166 NETMASK=255.255.255.0 NETWORK=192.168.0.0 ONBOOT=yes On CentOS 6.3: does not work DEVICE=eth0 BOOTPROTO=static BROADCAST=192.168.0.255 HWADDR=00:0C:29:1E:DE:86 IPADDR=192.168.0.242 NETMASK=255.255.255.0 NETWORK=192.168.0.0 GATEWAY=192.168.0.1 ONBOOT=yes DNS1=205.134.232.138 DNS2=4.4.4.4 DEVICE=eth0:0 BOOTPROTO=static BROADCAST=192.168.0.255 HWADDR=00:0C:29:1E:DE:86 IPADDR=192.168.0.240 NETMASK=255.255.255.0 NETWORK=192.168.0.0 ONBOOT=yes # /etc/init.d/network restart Shutting down interface eth0: Device state: 3 (disconnected) [ OK ] Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK Bringing up interface eth0: Active connection state: activated Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/3 [ OK ] # ping 192.168.0.240 PING 192.168.0.240 (192.168.0.240) 56(84) bytes of data. From 192.168.0.242 icmp_seq=2 Destination Host Unreachable Appreciate any advice, thanks Update: Perhaps this is relevant? On CentOS 5.7: # dmesg |grep eth eth0: registered as PCnet/PCI II 79C970A eth0: link up eth0: link up On 6.3: # dmesg | grep eth e1000 0000:02:00.0: eth0: (PCI:66MHz:32-bit) 00:0c:29:1e:de:86 e1000 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None 8021q: adding VLAN 0 to HW filter on device eth0 eth0: no IPv6 routers present

  Read the article

• Apache is sending php files to my browser instead of parsing

  - by justen doherty

  I have to set up PHP on an existing web host. I have made a virtual host entry, but for some reason Apache is sending the PHP to the browser instead of parsing.. from googling around it looks like it's a problem with the mimetypes, but I'm not an Apache expert by any means, so if anyone could help it would be appreciated... I have the following in my httpd.conf: AddHandler php5-script php DirectoryIndex index.html index.phtml index.php index.phps AddType application/x-httpd-php .phtml AddType application/x-httpd-php .php AddType application/x-httpd-php-source .phps The PHP module is loaded into Apache: /usr/sbin/apachectl -M Loaded Modules: core_module (static) mpm_prefork_module (static) http_module (static) so_module (static) auth_basic_module (shared) auth_digest_module (shared) authn_file_module (shared) authn_alias_module (shared) authn_anon_module (shared) authn_dbm_module (shared) authn_default_module (shared) authz_host_module (shared) authz_user_module (shared) authz_owner_module (shared) authz_groupfile_module (shared) authz_dbm_module (shared) authz_default_module (shared) ldap_module (shared) authnz_ldap_module (shared) include_module (shared) log_config_module (shared) logio_module (shared) env_module (shared) ext_filter_module (shared) mime_magic_module (shared) expires_module (shared) deflate_module (shared) headers_module (shared) usertrack_module (shared) setenvif_module (shared) mime_module (shared) dav_module (shared) status_module (shared) autoindex_module (shared) info_module (shared) dav_fs_module (shared) vhost_alias_module (shared) negotiation_module (shared) dir_module (shared) actions_module (shared) speling_module (shared) userdir_module (shared) alias_module (shared) rewrite_module (shared) proxy_module (shared) proxy_balancer_module (shared) proxy_ftp_module (shared) proxy_http_module (shared) proxy_connect_module (shared) cache_module (shared) suexec_module (shared) disk_cache_module (shared) file_cache_module (shared) mem_cache_module (shared) cgi_module (shared) version_module (shared) fcgid_module (shared) perl_module (shared) php5_module (shared) proxy_ajp_module (shared) ssl_module (shared) And this is my virtual host entry: <VirtualHost 10.16.140.113:80> ServerName viridor-cms.co.uk ServerAlias www.viridor-cms.co.uk UseCanonicalName Off DocumentRoot /var/www/vhosts/viridor-cms.co.uk/httpdocs CustomLog /var/www/vhosts/viridor-cms.co.uk/cms-access_log common ErrorLog /var/www/vhosts/viridor-cms.co.uk/cms-error_log DirectoryIndex index.php index.html <IfModule sapi_apache2.c> php_admin_flag engine on php_admin_flag safe_mode on </IfModule> <IfModule mod_php5.c> php_admin_flag engine on php_admin_flag safe_mode on </IfModule> AddType application/x-httpd-php .php AddType application/x-httpd-php-source .phps </VirtualHost> Please help, my head is so sore from banging it against the table and the wall!

  Read the article

• NAT ports - how do they work?

  - by Davidoper

  I have the following network schema: Computer A: three nics: NIC 1 (eth0): dhcp, public internet NIC 2 (eth1): static 192.168.1.1, gateway for Computer B NIC 3 (eth2): static 192.168.2.1, gateway for Computer C Computer B: static 192.168.1.2, using gateway 192.168.1.1 (NIC 2). Computer C: static 192.168.2.2, using gateway 192.168.2.1 (NIC 3). So I applied this to get NAT working: iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE Every computer can connect to the internet now. I have been applying rules to the main computer (Computer A), like dropping connections to some ports, e.g ssh: iptables -A INPUT -p tcp --dport 22 -j DROP But for instance, now I would like only allow connections for ports 20,21,22,53 and 80 in Computer C, and ignore the outside traffic if it's not related to those ports. The allowed connections should be FROM Computer C to outside, but not from outside to Computer C (I mean - Computer C is not hosting any HTTP or SSH, but it is going to use them as a client). I guess this sould be done like this: iptables -A OUTPUT -i eth2 -o eth0 -p tcp --dport 21 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A INPUT -i eth2 -o eth0 -p tcp --sport 21 -m state --state ESTABLISHED -j ACCEPT The last rule (dropping any other traffic different from those) is at the end of the configuration, so -A should be working correctly. The thing is... it is not working. If I put the last rule like this: iptables -A FORWARD -i eth2 -o eth0 -j DROP It just drops everything and, for instance, port 21 (previously opened as you can see above) is not either working. Can you tell me what could I have done wrong? I have been struggling with this problem for some time and I am unable to solve it. Thanks!

  Read the article

• HP Procurve 2610 intervlan routing

  - by user19039

  Can anyone tell me why inter vlan routing is working for all vlans except my newly created vlan 4/ I have an hp procurve 2610. Any help would be appreciated. I have basically this 1 switch with all unmanaged switches attached to the core. We have a second 2610 on port 28 Running configuration: ; J9085A Configuration Editor; Created on release #R.11.25 hostname "Core_HP" interface 22 speed-duplex 100-full exit ip routing snmp-server community "public" Unrestricted vlan 1 name "DEFAULT_VLAN" untagged 1-12,17-22,26-27 ip address 192.168.4.6 255.255.255.0 tagged 25 no untagged 13-16,23-24,28 exit vlan 2 name "WAN" untagged 28 ip address 10.254.254.3 255.255.255.0 exit vlan 3 name "Wireless" untagged 13-16,24 ip address 192.168.7.6 255.255.255.0 ip helper-address 192.168.4.2 tagged 27 exit vlan 35 name "guest" untagged 23 tagged 24 exit vlan 4 name "esxi" untagged 25 ip address 10.10.1.1 255.255.248.0 exit ip route 192.168.5.0 255.255.255.0 10.254.254.1 ip route 192.168.6.0 255.255.255.0 10.254.254.1 ip route 0.0.0.0 0.0.0.0 192.168.4.10 show ip route IP Route Entries Destination Gateway VLAN Type Sub-Type M etric Dist. ------------------ --------------- ---- --------- ---------- - --------- ----- 0.0.0.0/0 192.168.4.10 1 static 1 1 10.10.0.0/21 esxi 4 connected 0 0 10.254.254.0/24 WAN 2 connected 0 0 127.0.0.0/8 reject static 0 250 127.0.0.1/32 lo0 connected 0 0 192.168.4.0/24 DEFAULT_VLAN 1 connected 0 0 192.168.5.0/24 10.254.254.1 2 static 1 1 192.168.6.0/24 10.254.254.1 2 static 1 1 192.168.7.0/24 Wireless 3 connected 0 0 show ip Internet (IP) Service IP Routing : Enabled Default TTL : 64 Arp Age : 20 VLAN | IP Config IP Address Subnet Mask Prox y ARP ------------ + ---------- --------------- --------------- ---- ----- DEFAULT_VLAN | Manual 192.168.4.6 255.255.255.0 No WAN | Manual 10.254.254.3 255.255.255.0 No Wireless | Manual 192.168.7.6 255.255.255.0 No esxi | Manual 10.10.1.1 255.255.248.0 No guest | Disabled

  Read the article

• New router messed up server 2003 setup...

  - by Aceth

  Hey, We were sent a new 2wire router today configured it as best we can to match the old bt voyager. We've also got X static IP's. We've manage to get our webserver on one of the new IP's public facing. then we use a hardware firewall which is in a DMZ again with a different static IP. This firewall then is our gateway for our internal LAN. with a few servers etc. The problem we're having is only our PDC (primary Domain controller which has exchange 2003 on) can't ping externally even an external IP. We've connected laptops to the 2wire router and obtain a private ip 192.168.1.X and it works fine can ping etc. our other servers with an internal ip behind the firewall can ping out fine. We've connected to the firewalls logging console and the pings from the server are allowed through so its fine there. The server in question is a Windows server 2003 R2 Enterprise SP2 + Exchange 2003 Server doesn't have firewall turned on. it has static private IP .. gateway is pointing to the right one External Static IP is routing fine inwards We've ran out of ideas .. help??

  Read the article

• Apache Config: RSA server certificate CommonName (CN) ... NOT match server name?

  - by mmattax

  I'm getting this in error_log when I start Apache: [Tue Mar 09 14:57:02 2010] [notice] mod_python: Creating 4 session mutexes based on 300 max processes and 0 max threads. [Tue Mar 09 14:57:02 2010] [warn] RSA server certificate CommonName (CN) `*.foo.com' does NOT match server name!? [Tue Mar 09 14:57:02 2010] [warn] RSA server certificate CommonName (CN) `www.bar.com' does NOT match server name!? [Tue Mar 09 14:57:02 2010] [notice] Apache configured -- resuming normal operations Child processes then seem to seg fault: [Tue Mar 09 14:57:32 2010] [notice] child pid 3425 exit signal Segmentation fault (11) [Tue Mar 09 14:57:35 2010] [notice] child pid 3433 exit signal Segmentation fault (11) [Tue Mar 09 14:57:36 2010] [notice] child pid 3437 exit signal Segmentation fault (11) Server is RHEL, what's going on and what do I need to do to fix this? EDIT As requested, the dump from httpd -M: Loaded Modules: core_module (static) mpm_prefork_module (static) http_module (static) so_module (static) auth_basic_module (shared) auth_digest_module (shared) authn_file_module (shared) authn_alias_module (shared) authn_anon_module (shared) authn_default_module (shared) authz_host_module (shared) authz_user_module (shared) authz_owner_module (shared) authz_groupfile_module (shared) authz_default_module (shared) include_module (shared) log_config_module (shared) logio_module (shared) env_module (shared) ext_filter_module (shared) mime_magic_module (shared) expires_module (shared) deflate_module (shared) headers_module (shared) usertrack_module (shared) setenvif_module (shared) mime_module (shared) status_module (shared) autoindex_module (shared) info_module (shared) vhost_alias_module (shared) negotiation_module (shared) dir_module (shared) actions_module (shared) speling_module (shared) userdir_module (shared) alias_module (shared) rewrite_module (shared) cache_module (shared) disk_cache_module (shared) file_cache_module (shared) mem_cache_module (shared) cgi_module (shared) perl_module (shared) php5_module (shared) python_module (shared) ssl_module (shared) Syntax OK

  Read the article

• Installing/enabling PHP Pecl Intl extension on CentOs 5

  - by Marijn Huizendveld

  Original question: I'm having trouble installing the PHP Pecl Intl extension on my CentOs 5 machine. After installing both icu and libicu with the following commands: $ yum install icu $ yum install libicu I tried to install the Intl extension like so: $ /usr/bin/pecl install intl I selected to search for the default location for the ICU libraries and header files. It ends up crashing like this: checking whether to enable internationalization support... yes, shared checking for icu-config... no checking for location of ICU headers and libraries... not found configure: error: Unable to detect ICU prefix or no failed. Please verify ICU install prefix and make sure icu-config works. ERROR: `/tmp/pear/temp/intl/configure --with-icu-dir=DEFAULT' failed update After successfully installing the development version of icu as suggested by RusAlex (thanks RusAlex) like so: $ yum install libicu-devel I ran into a new problem which I also encountered locally the following command: $ /usr/bin/pecl install intl now produces this error: /private/tmp/pear/temp/intl/collator/collator_class.c:92: error: duplicate 'static' /private/tmp/pear/temp/intl/collator/collator_class.c:96: error: duplicate 'static' /private/tmp/pear/temp/intl/collator/collator_class.c:101: error: duplicate 'static' /private/tmp/pear/temp/intl/collator/collator_class.c:107: error: duplicate 'static' make: *** [collator/collator_class.lo] Error 1 ERROR: `make' failed It appears to have something to do with PHP 5.3 being bundled with Intl already. But how can I enable this extension, if I look in my PHP Info than I cannot find any reference to it...

  Read the article

• rc scripts dependencies

  - by chris

  On a Ubuntu 10.04.1 LTS server install certain services fail to start properly after a reboot. I have a couple of virtual interfaces defined on eth0: /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 172.16.5.240 netmask 255.255.255.0 gateway 172.16.5.1 auto eth0:1 iface eth0:1 inet static address 172.16.5.241 netmask 255.255.255.0 gateway 172.16.5.1 auto eth0:2 iface eth0:2 inet static address 172.16.5.242 netmask 255.255.255.0 gateway 172.16.5.1 auto eth0:3 iface eth0:3 inet static address 172.16.5.243 netmask 255.255.255.0 gateway 172.16.5.1 and so on... The services that try to bind to for example 172.16.5.243 fail during boot, complaining that there is no such IP address. My questions: 1) Are the services started parallel by default? Can I disable that so they run sequentially? 2) Is there a way to define dependencies between rc scripts? I'm only familiar with the defining the order of seqentially started scripts using the numbers in /etc/rc[0-6].d/) Any other fix or workaround appreciated.

  Read the article

• Apache22 on FreeBSD - Starts, does not respond to requests

  - by NuclearDog

  Hey folks! I'm running Apache 2.2.17 with the peruser MPM on FreeBSD 8.2-RC1 on Amazon's EC2 (so it's XEN). It was installed from ports. My problem is that, although Apache is running, listening for, and accepting connections, it doesn't actually respond to any or show them in the log at all. If I telnet to the port it's listening on and type out an HTTP request: GET / HTTP/1.1 Host: asdfasdf And hit enter a couple of times, it just sits there... Nothing. No response requesting with a browser either. There doesn't appear to be anything helpful in the error log: [Sun Jan 09 16:56:24 2011] [warn] Init: Session Cache is not configured [hint: SSLSessionCache] [Sun Jan 09 16:56:25 2011] [notice] Digest: generating secret for digest authentication ... [Sun Jan 09 16:56:25 2011] [notice] Digest: done [Sun Jan 09 16:56:25 2011] [notice] Apache/2.2.17 (FreeBSD) mod_ssl/2.2.17 The access log stays empty: root:/var/log# wc httpd-access.log 0 0 0 httpd-access.log root:/var/log# I've tried with accf_http and accf_data both enabled and disabled, and with both the stock configuration and my customized config. I also tried uninstalling apache22-peruser-mpm and just installing straight apache22... Still no luck. I tried removing all of the LoadModule lines from httpd.conf and just re-enabled the ones that were necessary to parse the config. Ended up with only the following loaded: root:/usr/local/etc/apache22# /usr/local/sbin/apachectl -M Loaded Modules: core_module (static) mpm_peruser_module (static) http_module (static) so_module (static) authz_host_module (shared) log_config_module (shared) alias_module (shared) Syntax OK root:/usr/local/etc/apache22# Same results. Apache is definitely what's listening on port 80: root:/usr/local/etc/apache22# sockstat -4 | grep httpd root httpd 43789 3 tcp4 6 *:80 *:* root httpd 43789 4 tcp4 *:* *:* root:/usr/local/etc/apache22# And I know it's not a firewall issue as there is nothing running locally, and connecting from the local box to 127.0.0.1:80 results in the same issue. Does anyone have any idea what's going on? Why it would be doing this? I've exhausted all of my debugging expertise. :/ Thanks for any suggestions!

  Read the article

• Windows Server 2008 R2 Virtual Network Setup

  - by jpearl01

  Hi all, Some background: I'm very much new to networking in general, and virtualization in particular. I'm trying to set up a series of VMs as we are transitioning to a thin client setup. I have been supplied a limited number of static ip addresses. The server is located in an offsite building which houses the network we use to connect to the internet, share folders etc. The setup I've been trying to go for is this: The host OS (Windows Server 2008 R2) is bound to one nic using one of the static ips (say, Nic1 and ip 10.255.6.61). I've set up another external virtual network attached to another physical nic , and a virtual private network attached to no nic. There is one VM running the same os (as the host). This VM is connected to both the external virtual network (and uses another static ip say Nic2 and ip 10.255.6.62) and also to the virtual private network (I gave it a static random ip 192.168.88.1 subnet mask 255.255.255.0). This virtual private network is connected to all the other VMs. I'd like to share the internet connection with all the other VMs on the private virtual network, and so I installed the RRAS role on the server connected to Nic2, and selected the option to share the internet over the vpn. I've run through the RRAS wizard a few times, trying different configurations, but none of them seem to be letting the other vms connect to the 'net. The vms seem to connect to the virtual private network fine, they are assigned an ip address and everything, but no internet, and no rest of the network either. The other problem is in general I connect to the vms with RDP. Will that be possible with a setup like this? i.e. will the vms show up as computers on the network? If not, what are my other options? Thanks! ~josh

  Read the article

• ipv6 with KVM on debian

  - by Eliasdx

  I have trouble setting up IPV6 on my Proxmox (KVM) server: My ISP sent me this information(xxx=placeholder): IPs: 2a01:XXX:XXX:301:: /64 Gateway: 2a01:XXX:XXX:300::1 /59 This is the interface setup on the host server: auto vmbr1 iface vmbr1 inet static address 178.XX.XX.4 broadcast 178.XX.XX.63 netmask 255.255.255.192 pointopoint 178.XX.XX.1 gateway 178.XX.XX.1 bridge_ports eth0 bridge_stp off bridge_fd 0 iface vmbr1 inet6 static address 2a01:XXX:XXX:301::2 netmask 64 up ip -6 route add 2a01:XXX:XXX:300::1 dev vmbr1 down ip -6 route del 2a01:XXX:XXX:300::1 dev vmbr1 up ip -6 route add default via 2a01:XXX:XXX:300::1 dev vmbr1 down ip -6 route del default via 2a01:XXX:XXX:300::1 dev vmbr1 On the guest: auto eth0 iface eth0 inet static address 178.xx.xx.47 netmask 255.255.255.255 broadcast 178.xx.xx.63 gateway 178.xx.xx.1 pointopoint 178.xx.xx.1 iface eth0 inet6 static pre-up modprobe ipv6 address 2a01:XXX:XXX:301::2:2 netmask 64 up ip -6 route add 2a01:XXX:XXX:300::1 dev eth0 down ip -6 route del 2a01:XXX:XXX:300::1 dev eth0 up ip -6 route add default via 2a01:XXX:XXX:300::1 dev eth0 down ip -6 route del default via 2a01:XXX:XXX:300::1 dev eth0 Ipv4 works on both host and guest but Ipv6 only works "sometimes". It's up for minutes and then down again until I change something. However I can actually ping the host and the guest from both host and guest. host:~# ip -6 neigh 2a01:XXX:XXX:301::100:2 dev vmbr1 lladdr 00:50:56:00:00:e0 REACHABLE 2a01:XXX:XXX:300::1 dev vmbr1 lladdr 00:26:88:76:18:18 router STALE host:~# ip -6 route 2a01:XXX:XXX:300::1 dev vmbr1 metric 1024 mtu 1500 advmss 1440 hoplimit 4294967295 2a01:XXX:XXX:301::/64 dev vmbr1 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev vmbr0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev vmbr1 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev tap101i1d0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 default via 2a01:XXX:XXX:300::1 dev vmbr1 metric 1024 mtu 1500 advmss 1440 hoplimit 4294967295 Does someone know why it isn't working? And is there a way to configure multiple v6 IPs from the same subnet so I can dedicate IPs to websites on a server with multiple virtualhosts?

  Read the article

• ipv6 with KVM on debian

  - by Eliasdx

  I have trouble setting up IPV6 on my Proxmox (KVM) server: My ISP sent me this information(xxx=placeholder): IPs: 2a01:XXX:XXX:301:: /64 Gateway: 2a01:XXX:XXX:300::1 /59 This is the interface setup on the host server: auto vmbr1 iface vmbr1 inet static address 178.XX.XX.4 broadcast 178.XX.XX.63 netmask 255.255.255.192 pointopoint 178.XX.XX.1 gateway 178.XX.XX.1 bridge_ports eth0 bridge_stp off bridge_fd 0 iface vmbr1 inet6 static address 2a01:XXX:XXX:301::2 netmask 64 up ip -6 route add 2a01:XXX:XXX:300::1 dev vmbr1 down ip -6 route del 2a01:XXX:XXX:300::1 dev vmbr1 up ip -6 route add default via 2a01:XXX:XXX:300::1 dev vmbr1 down ip -6 route del default via 2a01:XXX:XXX:300::1 dev vmbr1 On the guest: auto eth0 iface eth0 inet static address 178.xx.xx.47 netmask 255.255.255.255 broadcast 178.xx.xx.63 gateway 178.xx.xx.1 pointopoint 178.xx.xx.1 iface eth0 inet6 static pre-up modprobe ipv6 address 2a01:XXX:XXX:301::2:2 netmask 64 up ip -6 route add 2a01:XXX:XXX:300::1 dev eth0 down ip -6 route del 2a01:XXX:XXX:300::1 dev eth0 up ip -6 route add default via 2a01:XXX:XXX:300::1 dev eth0 down ip -6 route del default via 2a01:XXX:XXX:300::1 dev eth0 Ipv4 works on both host and guest but Ipv6 only works "sometimes". It's up for minutes and then down again until I change something. However I can actually ping the host and the guest from both host and guest. host:~# ip -6 neigh 2a01:XXX:XXX:301::100:2 dev vmbr1 lladdr 00:50:56:00:00:e0 REACHABLE 2a01:XXX:XXX:300::1 dev vmbr1 lladdr 00:26:88:76:18:18 router STALE host:~# ip -6 route 2a01:XXX:XXX:300::1 dev vmbr1 metric 1024 mtu 1500 advmss 1440 hoplimit 4294967295 2a01:XXX:XXX:301::/64 dev vmbr1 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev vmbr0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev vmbr1 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev tap101i1d0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 default via 2a01:XXX:XXX:300::1 dev vmbr1 metric 1024 mtu 1500 advmss 1440 hoplimit 4294967295 Does someone know why it isn't working? And is there a way to configure multiple v6 IPs from the same subnet so I can dedicate IPs to websites on a server with multiple virtualhosts?

  Read the article

• Routing / binding 128 IPs to one server

  - by Andrew

  I have a Ubuntu server with 128 ip's (static external ips 86.xx.xx.16), and I want to crawl pages thru different ip's. The gateway is xx.xxx.xxx.1, the main ip is xx.xxx.xxx.16, and the other 128 ip's are xx.xxx.xxx.129/255. I tried this configuration in /etc/network/interfaces but I doesn't work. It work if I remove the gateway for the aliases eth0:0 and eth0:1. I think this is routing problem. auto lo iface lo inet loopback auto eth0 auto eth0:0 auto eth0:1 iface eth0 inet static address xx.xxx.xxx.16 netmask 255.255.255.128 gateway xx.xxx.xxx.1 iface eth0:0 inet static address xx.xxx.xxx.129 netmask 255.255.255.128 gateway xx.xxx.xxx.1 iface eth0:1 inet static address xx.xxx.xxx.130 netmask 255.255.255.128 gateway xx.xxx.xxx.1 Also, please tell me how to "reset" every changes that I made in networking and routing. Update: I removed the gateway and now it works. I can reach the website thru all 128 ip's. But when I try to bind a socket connection in php to a specific ip I get no answer. socket_bind($sock, "xx.xxx.xx.xxx"); socket_connect($sock, 'google.com', 80); I tryed to use a sniffer to see the packets, and I see the packet sent from binded ip to google.com but the "connection" can't be established. I don't know anything about "route" command, but I have a feeling that this is the solution.

  Read the article

• Windows Server 2008 R2 Virtual Network Setup

  - by jpearl01

  Some background: I'm very much new to networking in general, and virtualization in particular. I'm trying to set up a series of VMs as we are transitioning to a thin client setup. I have been supplied a limited number of static ip addresses. The server is located in an offsite building which houses the network we use to connect to the internet, share folders etc. The setup I've been trying to go for is this: The host OS (Windows Server 2008 R2) is bound to one nic using one of the static ips (say, Nic1 and ip 10.255.6.61). I've set up another external virtual network attached to another physical nic , and a virtual private network attached to no nic. There is one VM running the same os (as the host). This VM is connected to both the external virtual network (and uses another static ip say Nic2 and ip 10.255.6.62) and also to the virtual private network (I gave it a static random ip 192.168.88.1 subnet mask 255.255.255.0). This virtual private network is connected to all the other VMs. I'd like to share the internet connection with all the other VMs on the private virtual network, and so I installed the RRAS role on the server connected to Nic2, and selected the option to share the internet over the vpn. I've run through the RRAS wizard a few times, trying different configurations, but none of them seem to be letting the other vms connect to the 'net. The vms seem to connect to the virtual private network fine, they are assigned an ip address and everything, but no internet, and no rest of the network either. The other problem is in general I connect to the vms with RDP. Will that be possible with a setup like this? i.e. will the vms show up as computers on the network? If not, what are my other options? Thanks! ~josh

  Read the article

• Virtual IPv6 Network between VirtualBox VMs

  - by Ben

  I'm trying to create a virtual IPv6 network as a test environment. I have 5 VirtualBox VMs (Ubuntu Server) with network adapters using host-only networking. You can imagine them being connected in series and every machine connects 2 subnets. I want to ping the last machine from the first one: On: 2001:db8:aaaa::100 I want to ping 2001:db8:dddd::101 (Note: there is no cccc network in between) Only static configuration and routes are used: /etc/network/interfaces auto eth0 iface eth0 inet6 static address 2001:db8:aaaa::100 netmask 64 /etc/network/interfaces auto eth0 iface eth0 inet6 static address 2001:db8:aaaa::101 netmask 64 auto eth1 iface eth1 inet6 static address 2001:db8:bbbb::100 netmask 64 up ip -6 route add 2001:db8:dddd::/64 via 2001:db8:bbbb::101 dev eth1 down ip -6 route del 2001:db8:dddd::/64 via 2001:db8:bbbb::101 dev eth1 I thought there might be some automatic route discovery going on. Anyway, ping6 2001:db8:dddd::100 will not work from aaaa::100 When I add the route: ip -6 route add 2001:db8:dddd::/64 via 2001:db8:aaaa::101 it will work. But the next interface in the same network dddd::101 is not reachable. How could that be? There is a machine with an interface bbbb::101 and another dddd::100 and I can ping the latter one, but the machine connected to it, dddd::101 not?? I also have also turned on forwarding. Any ideas?

  Read the article

• Connect two networks

  - by Meek Barrios

  Connecting two different offices with a wireless link and linux boxes. Hardware: 2 CISCO RV42, 2 Dual Homed Linux Boxes running debian, 2 2Wire and 2 AirMax 5 Configuration is: Office A LAN A (10.1.1.0/24) -> RV42 A (WAN1 - 10.1.1.254) -> 2Wire A (Internet) LINUX A ( ETH0 (LAN) 10.1.1.253, ETH1 (LINK) (10.1.3.3) Wireless Link --- AirMax A <-> AirMax B connected as Wireless Bridge Office B LAN B (10.1.2.0/24) -> RV42 B (WAN1 - 10.1.2.254) -> 2Wire B (Internet) LINUX B ( ETH0 (LAN) 10.1.2.253 -> ETH1 (LINK) (10.1.3.4) Network configuration is: LAN A - Default Gateway 10.1.1.254 RV42 A - Static Route 10.1.3.0/24 on 10.1.1.253 Static Route 10.1.2.0/24 on 10.1.1.253 Default on 192.168.1.1 (WAN1 Internet Access) Linux A - ETH0 10.1.1.253 netmask 255.255.255.0 gw 10.1.1.254 ETH1 10.1.3.3 netmask 255.255.255.0 gw 10.1.3.1 AIRMAX A - 10.1.3.1 netmask 255.255.255.0 gw 10.1.3.1 LAN B - Default Gateway 10.1.2.254 RV42 B - Static Route 10.1.3.0/24 on 10.1.2.253 Static Route 10.1.1.0/24 on 10.1.2.253 Default on 192.168.1.1 (WAN1 Internet Access) Linux B - ETH0 10.1.2.253 netmask 255.255.255.0 gw 10.1.2.254 ETH1 10.1.3.4 netmask 255.255.255.0 gw 10.1.3.2 AIRMAX B - 10.1.3.2 netmask 255.255.255.0 gw 10.1.3.2 Both linux have ip_forward set to 1 and the following on the iptables: iptables -F iptables -X iptables -P FORWARD ACCEPT iptables -P INPUT ACCEPT iptables -P OUTPUT ACCEPT I can ping from Linux B any ip on 10.1.1.0/24 segment and on linux A any ip on 10.1.2.0/24 segment however I cannot connect to HTTP or FTP on those machines. From LAN A I cannot see any other network. I'm looking for some advice for this configuration or a better solution. Regards

  Read the article

• pfSense routing between two routers with shared network

  - by JohnCC

  I have a network set-up using two pfSense routers arranged like this:- DMZ1 WAN1 WAN2 DMZ2 | | | | | | | | \___ PF1 PF2___/ | | | | \___TRUSTED___/ Each pfSense router has its own separate WAN connection, and a separate DMZ network attached to it. They share a common TRUSTED LAN between them. The machines on the trusted network have PF1 as their default gateway. PF1 has a static route defined to DMZ2 via PF2, and PF2 has a static route to DMZ1 via PF1. There is NAT to the WAN but internal networks (DMZ1/2 and TRUSTED) use different RFC1918 subnets. I inherited this arrangement, and all used to work fine. I made a config change to PF1 (relating to multicast), and machines on DMZ2 suddenly could not talk to TRUSTED. I rolled the change back, but the problem persisted. What I guess you'd hope would happen is that TCP packets would go DMZ2 - PF2 - TRUSTED and on return TRUSTED - PF1 - PF2 - DMZ2. That's the only way I can see it would have worked. However, PF1 drops the returning packets. I've verified this using tcpdump. I've worked around this by adding static routes to DMZ2 via PF2 to the servers on TRUSTED, but some devices on there do not support static routes so this is not ideal. Is there way to make this arrangement work decently, or is the design inherently flawed? Thanks!

  Read the article

• Profile System: User share the same id

  - by Malcolm Frexner

  I have a strange effect on my site when it is under heavy load. I randomly get the properties of other users settings. I have my own implementation of the profile system so I guess I can not blame the profile system itself. I just need a point to start debugging from. I guess there is a cookie-value that maps to an Profile entry somewhere. Is there any chance to see how this mapping works? Here is my profile provider: using System; using System.Text; using System.Configuration; using System.Web; using System.Web.Profile; using System.Collections; using System.Collections.Specialized; using B2CShop.Model; using log4net; using System.Collections.Generic; using System.Diagnostics; using B2CShop.DAL; using B2CShop.Model.RepositoryInterfaces; [assembly: log4net.Config.XmlConfigurator()] namespace B2CShop.Profile { public class B2CShopProfileProvider : ProfileProvider { private static readonly ILog _log = LogManager.GetLogger(typeof(B2CShopProfileProvider)); // Get an instance of the Profile DAL using the ProfileDALFactory private static readonly B2CShop.DAL.UserRepository dal = new B2CShop.DAL.UserRepository(); // Private members private const string ERR_INVALID_PARAMETER = "Invalid Profile parameter:"; private const string PROFILE_USER = "User"; private static string applicationName = B2CShop.Model.Configuration.ApplicationConfiguration.MembershipApplicationName; /// <summary> /// The name of the application using the custom profile provider. /// </summary> public override string ApplicationName { get { return applicationName; } set { applicationName = value; } } /// <summary> /// Initializes the provider. /// </summary> /// <param name="name">The friendly name of the provider.</param> /// <param name="config">A collection of the name/value pairs representing the provider-specific attributes specified in the configuration for this provider.</param> public override void Initialize(string name, NameValueCollection config) { if (config == null) throw new ArgumentNullException("config"); if (string.IsNullOrEmpty(config["description"])) { config.Remove("description"); config.Add("description", "B2C Shop Custom Provider"); } if (string.IsNullOrEmpty(name)) name = "b2c_shop"; if (config["applicationName"] != null && !string.IsNullOrEmpty(config["applicationName"].Trim())) applicationName = config["applicationName"]; base.Initialize(name, config); } /// <summary> /// Returns the collection of settings property values for the specified application instance and settings property group. /// </summary> /// <param name="context">A System.Configuration.SettingsContext describing the current application use.</param> /// <param name="collection">A System.Configuration.SettingsPropertyCollection containing the settings property group whose values are to be retrieved.</param> /// <returns>A System.Configuration.SettingsPropertyValueCollection containing the values for the specified settings property group.</returns> public override SettingsPropertyValueCollection GetPropertyValues(SettingsContext context, SettingsPropertyCollection collection) { string username = (string)context["UserName"]; bool isAuthenticated = (bool)context["IsAuthenticated"]; //if (!isAuthenticated) return null; int uniqueID = dal.GetUniqueID(username, isAuthenticated, false, ApplicationName); SettingsPropertyValueCollection svc = new SettingsPropertyValueCollection(); foreach (SettingsProperty prop in collection) { SettingsPropertyValue pv = new SettingsPropertyValue(prop); switch (pv.Property.Name) { case PROFILE_USER: if (!String.IsNullOrEmpty(username)) { pv.PropertyValue = GetUser(uniqueID); } break; default: throw new ApplicationException(ERR_INVALID_PARAMETER + " name."); } svc.Add(pv); } return svc; } /// <summary> /// Sets the values of the specified group of property settings. /// </summary> /// <param name="context">A System.Configuration.SettingsContext describing the current application usage.</param> /// <param name="collection">A System.Configuration.SettingsPropertyValueCollection representing the group of property settings to set.</param> public override void SetPropertyValues(SettingsContext context, SettingsPropertyValueCollection collection) { string username = (string)context["UserName"]; CheckUserName(username); bool isAuthenticated = (bool)context["IsAuthenticated"]; int uniqueID = dal.GetUniqueID(username, isAuthenticated, false, ApplicationName); if (uniqueID == 0) { uniqueID = dal.CreateProfileForUser(username, isAuthenticated, ApplicationName); } foreach (SettingsPropertyValue pv in collection) { if (pv.PropertyValue != null) { switch (pv.Property.Name) { case PROFILE_USER: SetUser(uniqueID, (UserInfo)pv.PropertyValue); break; default: throw new ApplicationException(ERR_INVALID_PARAMETER + " name."); } } } UpdateActivityDates(username, false); } // Profile gettters // Retrieve UserInfo private static UserInfo GetUser(int userID) { return dal.GetUser(userID); } // Update account info private static void SetUser(int uniqueID, UserInfo user) { user.UserID = uniqueID; dal.SetUser(user); } // UpdateActivityDates // Updates the LastActivityDate and LastUpdatedDate values // when profile properties are accessed by the // GetPropertyValues and SetPropertyValues methods. // Passing true as the activityOnly parameter will update // only the LastActivityDate. private static void UpdateActivityDates(string username, bool activityOnly) { dal.UpdateActivityDates(username, activityOnly, applicationName); } /// <summary> /// Deletes profile properties and information for the supplied list of profiles. /// </summary> /// <param name="profiles">A System.Web.Profile.ProfileInfoCollection of information about profiles that are to be deleted.</param> /// <returns>The number of profiles deleted from the data source.</returns> public override int DeleteProfiles(ProfileInfoCollection profiles) { int deleteCount = 0; foreach (ProfileInfo p in profiles) if (DeleteProfile(p.UserName)) deleteCount++; return deleteCount; } /// <summary> /// Deletes profile properties and information for profiles that match the supplied list of user names. /// </summary> /// <param name="usernames">A string array of user names for profiles to be deleted.</param> /// <returns>The number of profiles deleted from the data source.</returns> public override int DeleteProfiles(string[] usernames) { int deleteCount = 0; foreach (string user in usernames) if (DeleteProfile(user)) deleteCount++; return deleteCount; } // DeleteProfile // Deletes profile data from the database for the specified user name. private static bool DeleteProfile(string username) { CheckUserName(username); return dal.DeleteAnonymousProfile(username, applicationName); } // Verifies user name for sise and comma private static void CheckUserName(string userName) { if (string.IsNullOrEmpty(userName) || userName.Length > 256 || userName.IndexOf(",") > 0) throw new ApplicationException(ERR_INVALID_PARAMETER + " user name."); } /// <summary> /// Deletes all user-profile data for profiles in which the last activity date occurred before the specified date. /// </summary> /// <param name="authenticationOption">One of the System.Web.Profile.ProfileAuthenticationOption values, specifying whether anonymous, authenticated, or both types of profiles are deleted.</param> /// <param name="userInactiveSinceDate">A System.DateTime that identifies which user profiles are considered inactive. If the System.Web.Profile.ProfileInfo.LastActivityDate value of a user profile occurs on or before this date and time, the profile is considered inactive.</param> /// <returns>The number of profiles deleted from the data source.</returns> public override int DeleteInactiveProfiles(ProfileAuthenticationOption authenticationOption, DateTime userInactiveSinceDate) { string[] userArray = new string[0]; dal.GetInactiveProfiles((int)authenticationOption, userInactiveSinceDate, ApplicationName).CopyTo(userArray, 0); return DeleteProfiles(userArray); } /// <summary> /// Retrieves profile information for profiles in which the user name matches the specified user names. /// </summary> /// <param name="authenticationOption">One of the System.Web.Profile.ProfileAuthenticationOption values, specifying whether anonymous, authenticated, or both types of profiles are returned.</param> /// <param name="usernameToMatch">The user name to search for.</param> /// <param name="pageIndex">The index of the page of results to return.</param> /// <param name="pageSize">The size of the page of results to return.</param> /// <param name="totalRecords">When this method returns, contains the total number of profiles.</param> /// <returns>A System.Web.Profile.ProfileInfoCollection containing user-profile information // for profiles where the user name matches the supplied usernameToMatch parameter.</returns> public override ProfileInfoCollection FindProfilesByUserName(ProfileAuthenticationOption authenticationOption, string usernameToMatch, int pageIndex, int pageSize, out int totalRecords) { CheckParameters(pageIndex, pageSize); return GetProfileInfo(authenticationOption, usernameToMatch, null, pageIndex, pageSize, out totalRecords); } /// <summary> /// Retrieves profile information for profiles in which the last activity date occurred on or before the specified date and the user name matches the specified user name. /// </summary> /// <param name="authenticationOption">One of the System.Web.Profile.ProfileAuthenticationOption values, specifying whether anonymous, authenticated, or both types of profiles are returned.</param> /// <param name="usernameToMatch">The user name to search for.</param> /// <param name="userInactiveSinceDate">A System.DateTime that identifies which user profiles are considered inactive. If the System.Web.Profile.ProfileInfo.LastActivityDate value of a user profile occurs on or before this date and time, the profile is considered inactive.</param> /// <param name="pageIndex">The index of the page of results to return.</param> /// <param name="pageSize">The size of the page of results to return.</param> /// <param name="totalRecords">When this method returns, contains the total number of profiles.</param> /// <returns>A System.Web.Profile.ProfileInfoCollection containing user profile information for inactive profiles where the user name matches the supplied usernameToMatch parameter.</returns> public override ProfileInfoCollection FindInactiveProfilesByUserName(ProfileAuthenticationOption authenticationOption, string usernameToMatch, DateTime userInactiveSinceDate, int pageIndex, int pageSize, out int totalRecords) { CheckParameters(pageIndex, pageSize); return GetProfileInfo(authenticationOption, usernameToMatch, userInactiveSinceDate, pageIndex, pageSize, out totalRecords); } /// <summary> /// Retrieves user profile data for all profiles in the data source. /// </summary> /// <param name="authenticationOption">One of the System.Web.Profile.ProfileAuthenticationOption values, specifying whether anonymous, authenticated, or both types of profiles are returned.</param> /// <param name="pageIndex">The index of the page of results to return.</param> /// <param name="pageSize">The size of the page of results to return.</param> /// <param name="totalRecords">When this method returns, contains the total number of profiles.</param> /// <returns>A System.Web.Profile.ProfileInfoCollection containing user-profile information for all profiles in the data source.</returns> public override ProfileInfoCollection GetAllProfiles(ProfileAuthenticationOption authenticationOption, int pageIndex, int pageSize, out int totalRecords) { CheckParameters(pageIndex, pageSize); return GetProfileInfo(authenticationOption, null, null, pageIndex, pageSize, out totalRecords); } /// <summary> /// Retrieves user-profile data from the data source for profiles in which the last activity date occurred on or before the specified date. /// </summary> /// <param name="authenticationOption">One of the System.Web.Profile.ProfileAuthenticationOption values, specifying whether anonymous, authenticated, or both types of profiles are returned.</param> /// <param name="userInactiveSinceDate">A System.DateTime that identifies which user profiles are considered inactive. If the System.Web.Profile.ProfileInfo.LastActivityDate of a user profile occurs on or before this date and time, the profile is considered inactive.</param> /// <param name="pageIndex">The index of the page of results to return.</param> /// <param name="pageSize">The size of the page of results to return.</param> /// <param name="totalRecords">When this method returns, contains the total number of profiles.</param> /// <returns>A System.Web.Profile.ProfileInfoCollection containing user-profile information about the inactive profiles.</returns> public override ProfileInfoCollection GetAllInactiveProfiles(ProfileAuthenticationOption authenticationOption, DateTime userInactiveSinceDate, int pageIndex, int pageSize, out int totalRecords) { CheckParameters(pageIndex, pageSize); return GetProfileInfo(authenticationOption, null, userInactiveSinceDate, pageIndex, pageSize, out totalRecords); } /// <summary> /// Returns the number of profiles in which the last activity date occurred on or before the specified date. /// </summary> /// <param name="authenticationOption">One of the System.Web.Profile.ProfileAuthenticationOption values, specifying whether anonymous, authenticated, or both types of profiles are returned.</param> /// <param name="userInactiveSinceDate">A System.DateTime that identifies which user profiles are considered inactive. If the System.Web.Profile.ProfileInfo.LastActivityDate of a user profile occurs on or before this date and time, the profile is considered inactive.</param> /// <returns>The number of profiles in which the last activity date occurred on or before the specified date.</returns> public override int GetNumberOfInactiveProfiles(ProfileAuthenticationOption authenticationOption, DateTime userInactiveSinceDate) { int inactiveProfiles = 0; ProfileInfoCollection profiles = GetProfileInfo(authenticationOption, null, userInactiveSinceDate, 0, 0, out inactiveProfiles); return inactiveProfiles; } //Verifies input parameters for page size and page index. private static void CheckParameters(int pageIndex, int pageSize) { if (pageIndex < 1 || pageSize < 1) throw new ApplicationException(ERR_INVALID_PARAMETER + " page index."); } //GetProfileInfo //Retrieves a count of profiles and creates a //ProfileInfoCollection from the profile data in the //database. Called by GetAllProfiles, GetAllInactiveProfiles, //FindProfilesByUserName, FindInactiveProfilesByUserName, //and GetNumberOfInactiveProfiles. //Specifying a pageIndex of 0 retrieves a count of the results only. private static ProfileInfoCollection GetProfileInfo(ProfileAuthenticationOption authenticationOption, string usernameToMatch, object userInactiveSinceDate, int pageIndex, int pageSize, out int totalRecords) { ProfileInfoCollection profiles = new ProfileInfoCollection(); totalRecords = 0; // Count profiles only. if (pageSize == 0) return profiles; int counter = 0; int startIndex = pageSize * (pageIndex - 1); int endIndex = startIndex + pageSize - 1; DateTime dt = new DateTime(1900, 1, 1); if (userInactiveSinceDate != null) dt = (DateTime)userInactiveSinceDate; /* foreach(CustomProfileInfo profile in dal.GetProfileInfo((int)authenticationOption, usernameToMatch, dt, applicationName, out totalRecords)) { if(counter >= startIndex) { ProfileInfo p = new ProfileInfo(profile.UserName, profile.IsAnonymous, profile.LastActivityDate, profile.LastUpdatedDate, 0); profiles.Add(p); } if(counter >= endIndex) { break; } counter++; } */ return profiles; } } } This is how I use it in the controller: public ActionResult AddTyreToCart(CartViewModel model) { string profile = Request.IsAuthenticated ? Request.AnonymousID : User.Identity.Name; } I would like to debug: How can 2 users who provide different cookies get the same profileid? EDIT Here is the code for getuniqueid public int GetUniqueID(string userName, bool isAuthenticated, bool ignoreAuthenticationType, string appName) { SqlParameter[] parms = { new SqlParameter("@Username", SqlDbType.VarChar, 256), new SqlParameter("@ApplicationName", SqlDbType.VarChar, 256)}; parms[0].Value = userName; parms[1].Value = appName; if (!ignoreAuthenticationType) { Array.Resize(ref parms, parms.Length + 1); parms[2] = new SqlParameter("@IsAnonymous", SqlDbType.Bit) { Value = !isAuthenticated }; } int userID; object retVal = null; retVal = SqlHelper.ExecuteScalar(ConfigurationManager.ConnectionStrings["SQLOrderB2CConnString"].ConnectionString, CommandType.StoredProcedure, "getProfileUniqueID", parms); if (retVal == null) userID = CreateProfileForUser(userName, isAuthenticated, appName); else userID = Convert.ToInt32(retVal); return userID; } And this is the SP: CREATE PROCEDURE [dbo].[getProfileUniqueID] @Username VarChar( 256), @ApplicationName VarChar( 256), @IsAnonymous bit = null AS BEGIN SET NOCOUNT ON; /* [getProfileUniqueID] created 08.07.2009 mf Retrive unique id for current user */ SELECT UniqueID FROM dbo.Profiles WHERE Username = @Username AND ApplicationName = @ApplicationName AND IsAnonymous = @IsAnonymous or @IsAnonymous = null END

  Read the article

• Could not load type 'Default.DataMatch' in DataMatch.aspx file

  - by salvationishere

  I am developing a C# VS 2008 / SQL Server 2008 website, but now I am getting the above error when I build it. I included the Default.aspx, Default.aspx.cs, DataMatch.aspx, and DataMatch.aspx.cs files below. What do I need to do to fix this? Default.aspx: <%@ Page Language="C#" MasterPageFile="~/Site.master" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="_Default" Title="Untitled Page" %> ... DataMatch.aspx: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="DataMatch.aspx.cs" Inherits="_Default.DataMatch" %> ... Default.aspx.cs: using System; using System.Collections; using System.Configuration; using System.Data; using System.Linq; using System.Web; using System.Web.Security; using System.Web.UI; using System.Web.UI.HtmlControls; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using System.Xml.Linq; using System.Collections.Generic; using System.IO; using System.Drawing; using System.ComponentModel; using System.Data.SqlClient; using ADONET_namespace; using System.Security.Principal; //using System.Windows; public partial class _Default : System.Web.UI.Page //namespace AddFileToSQL { //protected System.Web.UI.HtmlControls.HtmlInputFile uploadFile; //protected System.Web.UI.HtmlControls.HtmlInputButton btnOWrite; //protected System.Web.UI.HtmlControls.HtmlInputButton btnAppend; protected System.Web.UI.WebControls.Label Label1; protected static string inputfile = ""; public static string targettable; public static string selection; // Number of controls added to view state protected int default_NumberOfControls { get { if (ViewState["default_NumberOfControls"] != null) { return (int)ViewState["default_NumberOfControls"]; } else { return 0; } } set { ViewState["default_NumberOfControls"] = value; } } protected void uploadFile_onclick(object sender, EventArgs e) { } protected void Load_GridData() { //GridView1.DataSource = ADONET_methods.DisplaySchemaTables(); //GridView1.DataBind(); } protected void btnOWrite_Click(object sender, EventArgs e) { if (uploadFile.PostedFile.ContentLength > 0) { feedbackLabel.Text = "You do not have sufficient access to overwrite table records."; } else { feedbackLabel.Text = "This file does not contain any data."; } } protected void btnAppend_Click(object sender, EventArgs e) { string fullpath = Page.Request.PhysicalApplicationPath; string path = uploadFile.PostedFile.FileName; if (File.Exists(path)) { // Create a file to write to. try { StreamReader sr = new StreamReader(path); string s = ""; while (sr.Peek() > 0) s = sr.ReadLine(); sr.Close(); } catch (IOException exc) { Console.WriteLine(exc.Message + "Cannot open file."); return; } } if (uploadFile.PostedFile.ContentLength > 0) { inputfile = System.IO.File.ReadAllText(path); Session["Message"] = inputfile; Response.Redirect("DataMatch.aspx"); } else { feedbackLabel.Text = "This file does not contain any data."; } } protected void Page_Load(object sender, EventArgs e) { if (Request.IsAuthenticated) { WelcomeBackMessage.Text = "Welcome back, " + User.Identity.Name + "!"; // Reference the CustomPrincipal / CustomIdentity CustomIdentity ident = User.Identity as CustomIdentity; if (ident != null) WelcomeBackMessage.Text += string.Format(" You are the {0} of {1}.", ident.Title, ident.CompanyName); AuthenticatedMessagePanel.Visible = true; AnonymousMessagePanel.Visible = false; if (!Page.IsPostBack) { Load_GridData(); } } else { AuthenticatedMessagePanel.Visible = false; AnonymousMessagePanel.Visible = true; } } protected void GridView1_SelectedIndexChanged(object sender, EventArgs e) { GridViewRow row = GridView1.SelectedRow; targettable = row.Cells[2].Text; } } DataMatch.aspx.cs: using System; using System.Collections; using System.Collections.Generic; using System.Data; using System.Data.SqlClient; using System.Diagnostics; using System.Web; using System.Web.UI; using System.Web.UI.WebControls; using ADONET_namespace; //using MatrixApp; //namespace AddFileToSQL //{ public partial class DataMatch : AddFileToSQL._Default { protected System.Web.UI.WebControls.PlaceHolder phTextBoxes; protected System.Web.UI.WebControls.PlaceHolder phDropDownLists; protected System.Web.UI.WebControls.Button btnAnotherRequest; protected System.Web.UI.WebControls.Panel pnlCreateData; protected System.Web.UI.WebControls.Literal lTextData; protected System.Web.UI.WebControls.Panel pnlDisplayData; protected static string inputfile2; static string[] headers = null; static string[] data = null; static string[] data2 = null; static DataTable myInputFile = new DataTable("MyInputFile"); static string[] myUserSelections; static bool restart = false; private DropDownList[] newcol; int @temp = 0; string @tempS = ""; string @tempT = ""; // a Property that manages a counter stored in ViewState protected int NumberOfControls { get { return (int)ViewState["NumControls"]; } set { ViewState["NumControls"] = value; } } private Hashtable ddl_ht { get { return (Hashtable)ViewState["ddl_ht"]; } set { ViewState["ddl_ht"] = value; } } // Page Load private void Page_Load(object sender, System.EventArgs e) { if (!Page.IsPostBack) { ddl_ht = new Hashtable(); this.NumberOfControls = 0; } } // This data comes from input file private void PopulateFileInputTable() { myInputFile.Columns.Clear(); string strInput, newrow; string[] oneRow; DataColumn myDataColumn; DataRow myDataRow; int result, numRows; //Read the input file strInput = Session["Message"].ToString(); data = strInput.Split('\r'); //Headers headers = data[0].Split('|'); //Data for (int i = 0; i < data.Length; i++) { newrow = data[i].TrimStart('\n'); data[i] = newrow; } result = String.Compare(data[data.Length - 1], ""); numRows = data.Length; if (result == 0) { numRows = numRows - 1; } data2 = new string[numRows]; for (int a = 0, b = 0; a < numRows; a++, b++) { data2[b] = data[a]; } // Create columns for (int col = 0; col < headers.Length; col++) { @temp = (col + 1); @tempS = @temp.ToString(); @tempT = "@col"+ @temp.ToString(); myDataColumn = new DataColumn(); myDataColumn.DataType = Type.GetType("System.String"); myDataColumn.ColumnName = headers[col]; myInputFile.Columns.Add(myDataColumn); ddl_ht.Add(@tempT, headers[col]); } // Create new DataRow objects and add to DataTable. for (int r = 0; r < numRows - 1; r++) { oneRow = data2[r + 1].Split('|'); myDataRow = myInputFile.NewRow(); for (int c = 0; c < headers.Length; c++) { myDataRow[c] = oneRow[c]; } myInputFile.Rows.Add(myDataRow); } NumberOfControls = headers.Length; myUserSelections = new string[NumberOfControls]; } //Create display panel private void CreateDisplayPanel() { btnSubmit.Style.Add("top", "auto"); btnSubmit.Style.Add("left", "auto"); btnSubmit.Style.Add("position", "absolute"); btnSubmit.Style.Add("top", "200px"); btnSubmit.Style.Add("left", "400px"); newcol = CreateDropDownLists(); for (int counter = 0; counter < NumberOfControls; counter++) { pnlDisplayData.Controls.Add(newcol[counter]); pnlDisplayData.Controls.Add(new LiteralControl("<br><br><br>")); pnlDisplayData.Visible = true; pnlDisplayData.FindControl(newcol[counter].ID); } } //Recreate display panel private void RecreateDisplayPanel() { btnSubmit.Style.Add("top", "auto"); btnSubmit.Style.Add("left", "auto"); btnSubmit.Style.Add("position", "absolute"); btnSubmit.Style.Add("top", "200px"); btnSubmit.Style.Add("left", "400px"); newcol = RecreateDropDownLists(); for (int counter = 0; counter < NumberOfControls; counter++) { pnlDisplayData.Controls.Add(newcol[counter]); pnlDisplayData.Controls.Add(new LiteralControl("<br><br><br>")); pnlDisplayData.Visible = true; pnlDisplayData.FindControl(newcol[counter].ID); } } // Add DropDownList Control to Placeholder private DropDownList[] CreateDropDownLists() { DropDownList[] dropDowns = new DropDownList[NumberOfControls]; for (int counter = 0; counter < NumberOfControls; counter++) { DropDownList ddl = new DropDownList(); SqlDataReader dr2 = ADONET_methods.DisplayTableColumns(targettable); ddl.ID = "DropDownListID" + counter.ToString(); int NumControls = targettable.Length; DataTable dt = new DataTable(); dt.Load(dr2); ddl.DataValueField = "COLUMN_NAME"; ddl.DataTextField = "COLUMN_NAME"; ddl.DataSource = dt; ddl.SelectedIndexChanged += new EventHandler(ddlList_SelectedIndexChanged); ddl.DataBind(); ddl.AutoPostBack = true; ddl.EnableViewState = true; //Preserves View State info on Postbacks dr2.Close(); ddl.Items.Add("IGNORE"); dropDowns[counter] = ddl; } return dropDowns; } protected void ddlList_SelectedIndexChanged(object sender, EventArgs e) { DropDownList ddl = (DropDownList)sender; string ID = ddl.ID; } // Add TextBoxes Control to Placeholder private DropDownList[] RecreateDropDownLists() { DropDownList[] dropDowns = new DropDownList[NumberOfControls]; for (int counter = 0; counter < NumberOfControls; counter++) { DropDownList ddl = new DropDownList(); SqlDataReader dr2 = ADONET_methods.DisplayTableColumns(targettable); ddl.ID = "DropDownListID" + counter.ToString(); int NumControls = targettable.Length; DataTable dt = new DataTable(); dt.Load(dr2); ddl.DataValueField = "COLUMN_NAME"; ddl.DataTextField = "COLUMN_NAME"; ddl.DataSource = dt; ddl.SelectedIndexChanged += new EventHandler(ddlList_SelectedIndexChanged); ddl.DataBind(); ddl.AutoPostBack = true; ddl.EnableViewState = false; //Preserves View State info on Postbacks dr2.Close(); ddl.Items.Add("IGNORE"); dropDowns[counter] = ddl; } return dropDowns; } private void CreateLabels() { for (int counter = 0; counter < NumberOfControls; counter++) { Label lbl = new Label(); lbl.ID = "Label" + counter.ToString(); lbl.Text = headers[counter]; lbl.Style["position"] = "absolute"; lbl.Style["top"] = 60 * counter + 10 + "px"; lbl.Style["left"] = 250 + "px"; pnlDisplayData.Controls.Add(lbl); pnlDisplayData.Controls.Add(new LiteralControl("<br><br><br>")); } } // Add TextBoxes Control to Placeholder private void RecreateLabels() { for (int counter = 0; counter < NumberOfControls; counter++) { Label lbl = new Label(); lbl.ID = "Label" + counter.ToString(); lbl.Text = headers[counter]; lbl.Style["position"] = "absolute"; lbl.Style["top"] = 60 * counter + 10 + "px"; lbl.Style["left"] = 250 + "px"; pnlDisplayData.Controls.Add(lbl); pnlDisplayData.Controls.Add(new LiteralControl("<br><br><br>")); } } // Create TextBoxes and DropDownList data here on postback. protected override void CreateChildControls() { // create the child controls if the server control does not contains child controls this.EnsureChildControls(); // Creates a new ControlCollection. this.CreateControlCollection(); // Here we are recreating controls to persist the ViewState on every post back if (Page.IsPostBack) { RecreateDisplayPanel(); RecreateLabels(); } // Create these conrols when asp.net page is created else { PopulateFileInputTable(); CreateDisplayPanel(); CreateLabels(); } // Prevent dropdownlists and labels from being created again. if (restart == false) { this.ChildControlsCreated = true; } else if (restart == true) { this.ChildControlsCreated = false; } } private void AppendRecords() { switch (targettable) { case "ContactType": for (int r = 0; r < myInputFile.Rows.Count; r++) { resultLabel.Text = ADONET_methods.AppendDataCT(myInputFile.Rows[r], ddl_ht); } break; case "Contact": for (int r = 0; r < myInputFile.Rows.Count; r++) { resultLabel.Text = ADONET_methods.AppendDataC(myInputFile.Rows[r], ddl_ht); } break; case "AddressType": for (int r = 0; r < myInputFile.Rows.Count; r++) { resultLabel.Text = ADONET_methods.AppendDataAT(myInputFile.Rows[r], ddl_ht); } break; default: resultLabel.Text = "You do not have access to modify this table. Please select a different target table and try again."; restart = true; break; //throw new ArgumentOutOfRangeException("targettable type", targettable); } } // Read all the data from TextBoxes and DropDownLists protected void btnSubmit_Click(object sender, System.EventArgs e) { //int cnt = FindOccurence("DropDownListID"); AppendRecords(); pnlDisplayData.Visible = false; btnSubmit.Visible = false; resultLabel.Attributes.Add("style", "align:center"); btnSubmit.Style.Add("top", "auto"); btnSubmit.Style.Add("left", "auto"); btnSubmit.Style.Add("position", "absolute"); int bSubmitPosition = NumberOfControls; btnSubmit.Style.Add("top", System.Convert.ToString(bSubmitPosition)+"px"); resultLabel.Visible = true; Instructions.Visible = false; if (restart == true) { CreateChildControls(); } } private int FindOccurence(string substr) { string reqstr = Request.Form.ToString(); return ((reqstr.Length - reqstr.Replace(substr, "").Length) / substr.Length); } #region Web Form Designer generated code override protected void OnInit(EventArgs e) { // // CODEGEN: This call is required by the ASP.NET Web Form Designer. // InitializeComponent(); base.OnInit(e); } /// <summary> /// Required method for Designer support - do not modify /// the contents of this method with the code editor. /// </summary> private void InitializeComponent() { } #endregion } //}

  Read the article

• Using C# 4.0’s DynamicObject as a Stored Procedure Wrapper

  - by EltonStoneman

  [Source: http://geekswithblogs.net/EltonStoneman] Overview Ignoring the fashion, I still make a lot of use of DALs – typically when inheriting a codebase with an established database schema which is full of tried and trusted stored procedures. In the DAL a collection of base classes have all the scaffolding, so the usual pattern is to create a wrapper class for each stored procedure, giving typesafe access to parameter values and output. DAL calls then looks like instantiate wrapper-populate parameters-execute call:       using (var sp = new uspGetManagerEmployees())     {         sp.ManagerID = 16;         using (var reader = sp.Execute())         {             //map entities from the output         }     }   Or rolling it all into a fluent DAL call – which is nicer to read and implicitly disposes the resources:   This is fine, the wrapper classes are very simple to handwrite or generate. But as the codebase grows, you end up with a proliferation of very small wrapper classes: The wrappers don't add much other than encapsulating the stored procedure call and giving you typesafety for the parameters. With the dynamic extension in .NET 4.0 you have the option to build a single wrapper class, and get rid of the one-to-one stored procedure to wrapper class mapping. In the dynamic version, the call looks like this:       dynamic getUser = new DynamicSqlStoredProcedure("uspGetManagerEmployees", Database.AdventureWorks);     getUser.ManagerID = 16;       var employees = Fluently.Load<List<Employee>>()                             .With<EmployeeMap>()                             .From(getUser);   The important difference is that the ManagerId property doesn't exist in the DynamicSqlStoredProcedure class. Declaring the getUser object with the dynamic keyword allows you to dynamically add properties, and the DynamicSqlStoredProcedure class intercepts when properties are added and builds them as stored procedure parameters. When getUser.ManagerId = 16 is executed, the base class adds a parameter call (using the convention that parameter name is the property name prefixed by "@"), specifying the correct SQL Server data type (mapping it from the type of the value the property is set to), and setting the parameter value. Code Sample This is worked through in a sample project on github – Dynamic Stored Procedure Sample – which also includes a static version of the wrapper for comparison. (I'll upload this to the MSDN Code Gallery once my account has been resurrected). Points worth noting are: DynamicSP.Data – database-independent DAL that has all the data plumbing code. DynamicSP.Data.SqlServer – SQL Server DAL, thin layer on top of the generic DAL which adds SQL Server specific classes. Includes the DynamicSqlStoredProcedure base class. DynamicSqlStoredProcedure.TrySetMember. Invoked when a dynamic member is added. Assumes the property is a parameter named after the SP parameter name and infers the SqlDbType from the framework type. Adds a parameter to the internal stored procedure wrapper and sets its value. uspGetManagerEmployees – the static version of the wrapper. uspGetManagerEmployeesTest – test fixture which shows usage of the static and dynamic stored procedure wrappers. The sample uses stored procedures from the AdventureWorks database in the SQL Server 2008 Sample Databases. Discussion For this scenario, the dynamic option is very favourable. Assuming your DAL is itself wrapped by a higher layer, the stored procedure wrapper classes have very little reuse. Even if you're codegening the classes and test fixtures, it's still additional effort for very little value. The main consideration with dynamic classes is that the compiler ignores all the members you use, and evaluation only happens at runtime. In this case where scope is strictly limited that's not an issue – but you're relying on automated tests rather than the compiler to find errors, but that should just encourage better test coverage. Also you can codegen the dynamic calls at a higher level. Performance may be a consideration, as there is a first-time-use overhead when the dynamic members of an object are bound. For a single run, the dynamic wrapper took 0.2 seconds longer than the static wrapper. The framework does a good job of caching the effort though, so for 1,000 calls the dynamc version still only takes 0.2 seconds longer than the static: You don't get IntelliSense on dynamic objects, even for the declared members of the base class, and if you've been using class names as keys for configuration settings, you'll lose that option if you move to dynamics. The approach may make code more difficult to read, as you can't navigate through dynamic members, but you do still get full debugging support.     var employees = Fluently.Load<List<Employee>>()                             .With<EmployeeMap>()                             .From<uspGetManagerEmployees>                             (                                 i => i.ManagerID = 16,                                 x => x.Execute()                             );

  Read the article

• Getting a Web Resource Url in non WebForms Applications

  - by Rick Strahl

  WebResources in ASP.NET are pretty useful feature. WebResources are resources that are embedded into a .NET assembly and can be loaded from the assembly via a special resource URL. WebForms includes a method on the ClientScriptManager (Page.ClientScript) and the ScriptManager object to retrieve URLs to these resources. For example you can do: ClientScript.GetWebResourceUrl(typeof(ControlResources), ControlResources.JQUERY_SCRIPT_RESOURCE); GetWebResourceUrl requires a type (which is used for the assembly lookup in which to find the resource) and the resource id to lookup. GetWebResourceUrl() then returns a nasty old long URL like this: WebResource.axd?d=-b6oWzgbpGb8uTaHDrCMv59VSmGhilZP5_T_B8anpGx7X-PmW_1eu1KoHDvox-XHqA1EEb-Tl2YAP3bBeebGN65tv-7-yAimtG4ZnoWH633pExpJor8Qp1aKbk-KQWSoNfRC7rQJHXVP4tC0reYzVw2&t=634533278261362212 While lately excessive resource usage has been frowned upon especially by MVC developers who tend to opt for content distributed as files, I still think that Web Resources have their place even in non-WebForms applications. Also if you have existing assemblies that include resources like scripts and common image links it sure would be nice to access them from non-WebForms pages like MVC views or even in plain old Razor Web Pages. Where's my Page object Dude? Unfortunately natively ASP.NET doesn't have a mechanism for retrieving WebResource Urls outside of the WebForms engine. It's a feature that's specifically baked into WebForms and that relies specifically on the Page HttpHandler implementation. Both Page.ClientScript (obviously) and ScriptManager rely on a hosting Page object in order to work and the various methods off these objects require control instances passed. The reason for this is that the script managers can inject scripts and links into Page content (think RegisterXXXX methods) and for that a Page instance is required. However, for many other methods - like GetWebResourceUrl() - that simply return resources or resource links the Page reference is really irrelevant. While there's a separate ClientScriptManager class, it's marked as sealed and doesn't have any public constructors so you can't create your own instance (without Reflection). Even if it did the internal constructor it does have requires a Page reference. No good… So, can we get access to a WebResourceUrl generically without running in a WebForms Page instance? We just have to create a Page instance ourselves and use it internally. There's nothing intrinsic about the use of the Page class in ClientScript, at least for retrieving resources and resource Urls so it's easy to create an instance of a Page for example in a static method. For our needs of retrieving ResourceUrls or even actually retrieving script resources we can use a canned, non-configured Page instance we create on our own. The following works just fine: public static string GetWebResourceUrl(Type type, string resource ) { Page page = new Page(); return page.ClientScript.GetWebResourceUrl(type, resource); } A slight optimization for this might be to cache the created Page instance. Page tends to be a pretty heavy object to create each time a URL is required so you might want to cache the instance: public class WebUtils { private static Page CachedPage { get { if (_CachedPage == null) _CachedPage = new Page(); return _CachedPage; } } private static Page _CachedPage; public static string GetWebResourceUrl(Type type, string resource) { return CachedPage.ClientScript.GetWebResourceUrl(type, resource); } } You can now use GetWebResourceUrl in a Razor page like this: <!DOCTYPE html> <html <head> <script src="@WebUtils.GetWebResourceUrl(typeof(ControlResources),ControlResources.JQUERY_SCRIPT_RESOURCE)"> </script> </head> <body> <div class="errordisplay"> <img src="@WebUtils.GetWebResourceUrl(typeof(ControlResources),ControlResources.WARNING_ICON_RESOURCE)" /> This is only a Test! </div> </body> </html> And voila - there you have WebResources served from a non-Page based application. WebResources may be a on the way out, but legacy apps have them embedded and for some situations, like fallback scripts and some common image resources I still like to use them. Being able to use them from non-WebForms applications should have been built into the core ASP.NETplatform IMHO, but seeing that it's not this workaround is easy enough to implement.© Rick Strahl, West Wind Technologies, 2005-2011Posted in ASP.NET  MVC   Tweet (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• TDD and WCF behavior

  - by Frederic Hautecoeur

  Some weeks ago I wanted to develop a WCF behavior using TDD. I have lost some time trying to use mocks. After a while i decided to just use a host and a client. I don’t like this approach but so far I haven’t found a good and fast solution to use Unit Test for testing a WCF behavior. To Implement my solution I had to : Create a Dummy Service Definition; Create the Dummy Service Implementation; Create a host; Create a client in my test; Create and Add the behavior; Dummy Service Definition This is just a simple service, composed of an Interface and a simple implementation. The structure is aimed to be easily customizable for my future needs.   Using Clauses : 1: using System.Runtime.Serialization; 2: using System.ServiceModel; 3: using System.ServiceModel.Channels; The DataContract: 1: [DataContract()] 2: public class MyMessage 3: { 4: [DataMember()] 5: public string MessageString; 6: } The request MessageContract: 1: [MessageContract()] 2: public class RequestMessage 3: { 4: [MessageHeader(Name = "MyHeader", Namespace = "http://dummyservice/header", Relay = true)] 5: public string myHeader; 6:  7: [MessageBodyMember()] 8: public MyMessage myRequest; 9: } The response MessageContract: 1: [MessageContract()] 2: public class ResponseMessage 3: { 4: [MessageHeader(Name = "MyHeader", Namespace = "http://dummyservice/header", Relay = true)] 5: public string myHeader; 6:  7: [MessageBodyMember()] 8: public MyMessage myResponse; 9: } The ServiceContract: 1: [ServiceContract(Name="DummyService", Namespace="http://dummyservice",SessionMode=SessionMode.Allowed )] 2: interface IDummyService 3: { 4: [OperationContract(Action="Perform", IsOneWay=false, ProtectionLevel=System.Net.Security.ProtectionLevel.None )] 5: ResponseMessage DoThis(RequestMessage request); 6: } Dummy Service Implementation 1: public class DummyService:IDummyService 2: { 3: #region IDummyService Members 4: public ResponseMessage DoThis(RequestMessage request) 5: { 6: ResponseMessage response = new ResponseMessage(); 7: response.myHeader = "Response"; 8: response.myResponse = new MyMessage(); 9: response.myResponse.MessageString = 10: string.Format("Header:<{0}> and Request was <{1}>", 11: request.myHeader, request.myRequest.MessageString); 12: return response; 13: } 14: #endregion 15: } Host Creation The most simple host implementation using a Named Pipe binding. The GetBinding method will create a binding for the host and can be used to create the same binding for the client. 1: public static class TestHost 2: { 3: 4: internal static string hostUri = "net.pipe://localhost/dummy"; 5:  6: // Create Host method. 7: internal static ServiceHost CreateHost() 8: { 9: ServiceHost host = new ServiceHost(typeof(DummyService)); 10:  11: // Creating Endpoint 12: Uri namedPipeAddress = new Uri(hostUri); 13: host.AddServiceEndpoint(typeof(IDummyService), GetBinding(), namedPipeAddress); 14:  15: return host; 16: } 17:  18: // Binding Creation method. 19: internal static Binding GetBinding() 20: { 21: NamedPipeTransportBindingElement namedPipeTransport = new NamedPipeTransportBindingElement(); 22: TextMessageEncodingBindingElement textEncoding = new TextMessageEncodingBindingElement(); 23:  24: return new CustomBinding(textEncoding, namedPipeTransport); 25: } 26:  27: // Close Method. 28: internal static void Close(ServiceHost host) 29: { 30: if (null != host) 31: { 32: host.Close(); 33: host = null; 34: } 35: } 36: } Checking the service A simple test tool check the plumbing. 1: [TestMethod] 2: public void TestService() 3: { 4: using (ServiceHost host = TestHost.CreateHost()) 5: { 6: host.Open(); 7:  8: using (ChannelFactory<IDummyService> channel = 9: new ChannelFactory<IDummyService>(TestHost.GetBinding() 10: , new EndpointAddress(TestHost.hostUri))) 11: { 12: IDummyService svc = channel.CreateChannel(); 13: try 14: { 15: RequestMessage request = new RequestMessage(); 16: request.myHeader = Guid.NewGuid().ToString(); 17: request.myRequest = new MyMessage(); 18: request.myRequest.MessageString = "I want some beer."; 19:  20: ResponseMessage response = svc.DoThis(request); 21: } 22: catch (Exception ex) 23: { 24: Assert.Fail(ex.Message); 25: } 26: } 27: host.Close(); 28: } 29: } Running the service should show that the client and the host are running fine. So far so good. Adding the Behavior Add a reference to the Behavior project and add the using entry in the test class. We just need to add the behavior to the service host : 1: [TestMethod] 2: public void TestService() 3: { 4: using (ServiceHost host = TestHost.CreateHost()) 5: { 6: host.Description.Behaviors.Add(new MyBehavior()); 7: host.Open();¨ 8: …  If you set a breakpoint in your behavior and run the test in debug mode, you will hit the breakpoint. In this case I used a ServiceBehavior. To add an Endpoint behavior you have to add it to the endpoints. 1: host.Description.Endpoints[0].Behaviors.Add(new MyEndpointBehavior()) To add a contract or an operation behavior a custom attribute should work on the service contract definition. I haven’t tried that yet.   All the code provided in this blog and in the following files are for sample use. Improvements I don’t like to instantiate a client and a service to test my behaviors. But so far I have' not found an easy way to do it. Today I am passing a type of endpoint to the host creator and it creates the right binding type. This allows me to easily switch between bindings at will. I have used the same approach to test Mex Endpoints, another post should come later for this. Enjoy !

  Read the article

• Event Logging in LINQ C# .NET

  The first thing you'll want to do before using this code is to create a table in your database called TableHistory: CREATE TABLE [dbo].[TableHistory] (     [TableHistoryID] [int] IDENTITY NOT NULL ,     [TableName] [varchar] (50) NOT NULL ,     [Key1] [varchar] (50) NOT NULL ,     [Key2] [varchar] (50) NULL ,     [Key3] [varchar] (50) NULL ,     [Key4] [varchar] (50) NULL ,     [Key5] [varchar] (50) NULL ,     [Key6] [varchar] (50)NULL ,     [ActionType] [varchar] (50) NULL ,     [Property] [varchar] (50) NULL ,     [OldValue] [varchar] (8000) NULL ,     [NewValue] [varchar] (8000) NULL ,     [ActionUserName] [varchar] (50) NOT NULL ,     [ActionDateTime] [datetime] NOT NULL ) Once you have created the table, you'll need to add it to your custom LINQ class (which I will refer to as DboDataContext), thus creating the TableHistory class. Then, you'll need to add the History.cs file to your project. You'll also want to add the following code to your project to get the system date: public partial class DboDataContext{ [Function(Name = "GetDate", IsComposable = true)] public DateTime GetSystemDate() { MethodInfo mi = MethodBase.GetCurrentMethod() as MethodInfo; return (DateTime)this.ExecuteMethodCall(this, mi, new object[] { }).ReturnValue; }}private static Dictionary<type,> _cachedIL = new Dictionary<type,>();public static T CloneObjectWithIL<t>(T myObject){ Delegate myExec = null; if (!_cachedIL.TryGetValue(typeof(T), out myExec)) { // Create ILGenerator DynamicMethod dymMethod = new DynamicMethod("DoClone", typeof(T), new Type[] { typeof(T) }, true); ConstructorInfo cInfo = myObject.GetType().GetConstructor(new Type[] { }); ILGenerator generator = dymMethod.GetILGenerator(); LocalBuilder lbf = generator.DeclareLocal(typeof(T)); //lbf.SetLocalSymInfo("_temp"); generator.Emit(OpCodes.Newobj, cInfo); generator.Emit(OpCodes.Stloc_0); foreach (FieldInfo field in myObject.GetType().GetFields( System.Reflection.BindingFlags.Instance | System.Reflection.BindingFlags.Public | System.Reflection.BindingFlags.NonPublic)) { // Load the new object on the eval stack... (currently 1 item on eval stack) generator.Emit(OpCodes.Ldloc_0); // Load initial object (parameter) (currently 2 items on eval stack) generator.Emit(OpCodes.Ldarg_0); // Replace value by field value (still currently 2 items on eval stack) generator.Emit(OpCodes.Ldfld, field); // Store the value of the top on the eval stack into // the object underneath that value on the value stack. // (0 items on eval stack) generator.Emit(OpCodes.Stfld, field); } // Load new constructed obj on eval stack -> 1 item on stack generator.Emit(OpCodes.Ldloc_0); // Return constructed object. --> 0 items on stack generator.Emit(OpCodes.Ret); myExec = dymMethod.CreateDelegate(typeof(Func<t,>)); _cachedIL.Add(typeof(T), myExec); } return ((Func<t,>)myExec)(myObject);}I got both of the above methods off of the net somewhere (maybe even from CodeProject), but it's been long enough that I can't recall where I got them.Explanation of the History ClassThe History class records changes by creating a TableHistory record, inserting the values for the primary key for the table being modified into the Key1, Key2, ..., Key6 columns (if you have more than 6 values that make up a primary key on any table, you'll want to modify this), setting the type of change being made in the ActionType column (INSERT, UPDATE, or DELETE), old value and new value if it happens to be an update action, and the date and Windows identity of the user who made the change.Let's examine what happens when a call is made to the RecordLinqInsert method:public static void RecordLinqInsert(DboDataContext dbo, IIdentity user, object obj){ TableHistory hist = NewHistoryRecord(obj); hist.ActionType = "INSERT"; hist.ActionUserName = user.Name; hist.ActionDateTime = dbo.GetSystemDate(); dbo.TableHistories.InsertOnSubmit(hist);}private static TableHistory NewHistoryRecord(object obj){ TableHistory hist = new TableHistory(); Type type = obj.GetType(); PropertyInfo[] keys; if (historyRecordExceptions.ContainsKey(type)) { keys = historyRecordExceptions[type].ToArray(); } else { keys = type.GetProperties().Where(o => AttrIsPrimaryKey(o)).ToArray(); } if (keys.Length > KeyMax) throw new HistoryException("object has more than " + KeyMax.ToString() + " keys."); for (int i = 1; i <= keys.Length; i++) { typeof(TableHistory) .GetProperty("Key" + i.ToString()) .SetValue(hist, keys[i - 1].GetValue(obj, null).ToString(), null); } hist.TableName = type.Name; return hist;}protected static bool AttrIsPrimaryKey(PropertyInfo pi){ var attrs = from attr in pi.GetCustomAttributes(typeof(ColumnAttribute), true) where ((ColumnAttribute)attr).IsPrimaryKey select attr; if (attrs != null && attrs.Count() > 0) return true; else return false;}RecordLinqInsert takes as input a data context which it will use to write to the database, the user, and the LINQ object to be recorded (a single object, for instance, a Customer or Order object if you're using AdventureWorks). It then calls the NewHistoryRecord method, which uses LINQ to Objects in conjunction with the AttrIsPrimaryKey method to pull all the primary key properties, set the Key1-KeyN properties of the TableHistory object, and return the new TableHistory object. The code would be called in an application, like so: Continue span.fullpost {display:none;}

  Read the article

< Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >