Search Results

Search found 149495 results on 5980 pages for 'windows web server'.

Page 104/5980 | < Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >

• Two clustered SQL instances on one cluster - same port 1433?

  - by Sam

  Can two clustered SQL instances on a 2003 windows cluster use the same 1433 tcp port setting reliably? It seems to be up and working right now.

  Read the article

• Running multiple box2D world objects on a server

  - by CharbelAbdo

  I'm creating a multiplayer game using LibGdx (with Box2d) and Kryonet. Since this is the first time I work on multiplayer games, I read a bit about server - client implementations, and it turns out that the server should handle important tasks like collision detection, hits, characters dying etc... Based on some articles (like the excellent Gabriel Gambetta Fast paced multiplayer series), I also know that the client should work in parallel to avoid the lag while the server responds to commands. Physics wise, each game will have 2 players, and any projectiles fired. What I'm thinking of doing is the following: Create a physics world on the client When the game is signaled to start, I create the same physics world on the server (without any rendering obviously). Whenever the player issues a command (move or fire), I send the command to the server and immediately start processing it on the client. When the server receives the command, it applies it on the server's world (set velocity etc...) Each 100ms, the server sends the new state to the client which corrects what was calculated locally. Any critical action (hit, death, level up) is calculated only on the server and sent to the client. Essentially, I would have a Box2d World object running on the server for each game in progress, in sync with the worlds running on the clients. The alternative would be to do my own calculations on the server instead of relying on Box2D to do them for me, but I'm trying to avoid that. My question is: Is it wise to have, for example, 1000 instances of the World object running and executing steps on the server? Tomcat used around 750 MBytes of memory when trying it without any object added to the world. Anybody tried that before? If not, is there any alternative? Google did not help me, are there any guidelines to use when you want to have physics on both the client and the server? Thanks for any help.

  Read the article

• kerberos NTLM authentication

  - by rockbala

  Hi, Where can I check in Windows Server 2008 that Kereberos/NTLM is the authentication protocol used after the whole network is set up/installed. There is only 1 domain controller with AD services and is not affiliated with any other domains. Regards, Balaji S

  Read the article

• How can I determine which taskbar application/windows are requesting user attention

  - by Frederic

  I'd like to know how to get a list of the windows requiring user attention from the Windows taskbar. Windows requiring attention appear with a flashing orange color within the Windows taskbar. Un-focused MSN Messenger conversation windows are a good example of this behavior: they turn orange as soon as a remote user sends an instance message. My code targets the Windows 7 platform, but working on older Windows OS would be nice too.

  Read the article

• Windows scheduled task fails to complete with error code 0xc000013a

  - by Brian

  I'm using Windows Server 2003 and have a scheduled task that fails to complete. The task is set to run a Windows Command Script (.cmd) at 3pm each day. The script runs a program that extracts some data from a SQL Server database and uploads that data to an FTP server. The error code displayed in the "Last result" column of the scheduled tasks folder is 0xc000013a. A quick Google search leads to this Microsoft support page that states: The most common "C" error code is "0xC000013A: The application terminated as a result of a CTRL+C". No-one is logged in at the time the task runs, so there's no-one around to press CTRL+C. I'm not sure I understand what is being said here in the Microsoft documentation. I've checked the rudimentary things - the scheduled task is enabled, scheduled to run each day, and pointing to a file that does exist in a valid location. Interestingly, when I run this task manually (either by running the .cmd script from the command line, or by right-clicking the task and clicking "Run") the task completes successfully. What does this error code mean, and how can I get this task to run when I'm not there to force it?

  Read the article

• SQL Server: How to shrink FileStream files?

  - by J4N

  For a project, I'm using a SQL Server 2008 R2. One table has a filestream column. I've made some load tests, and now the database has ~20GB used. I've empty tables, except several(configuration tables). But my database was still using a lot of space. So I used the Task -> Shrink -> Database / Files But my database is still using something like 16GB. I found that it's the filestream file is still using a lot of space. The problem is that I need to backup this database to export it on the final production server, and event if I indicate to compress the backup I got a file more than 3.5Go. Not convenient to store and upload. And I'm planning much bigger test, so I want to know how to shrink that empty space. When I'm trying: I get this exception: The properties SIZE, MAXSIZE, or FILEGROWTH cannot be specified for the FILESTREAM data file 'FileStreamFile'. (Microsoft SQL Server, Error: 5509) So what should I do? I found several topics with this error but they was about removing the filestream column.

  Read the article

• Windows Server 2008 Services won't start after patch

  - by Antitribu

  After installing the run of the mill patches today on a Windows Server 2008 (Running as an AD controller and Exchange 2007 Server) the machine came back up with "configuring updates stage 3 of 3 0% complete". The machine had been kept reasonably up to date so this likely was caused by a very recent patch. At the leaste the following patches were installed: KB973037 KB969947 KB973565 Restarting the server into safe mode and then subsequently rebooting (with no changes made) allowed the computer to restart and I can now log in normally. However none of the critical services start; including but not limited to Exchange, DNS and Terminal Services (Obviously if DNS doesn't start other things will break). I am unable to run Internet Explorer but Chrome will work. There are no meaningful errors in the event logs as to why services won't start. Under KDC I have The Key Distribution Center (KDC) cannot find a suitable certificate to use for smart card logons, or the KDC certificate could not be verified. Smart card logon may not function correctly if this problem is not resolved. To correct this problem, either verify the existing KDC certificate using certutil.exe or enroll for a new KDC certificate. This is going to be an evil one to debug and I'm kinda hoping someone has encountered it and knows the answer off hand. Thanks all.

  Read the article

• Server 2003, XP Clients, DNS issues

  - by ron

  Hello, Im having DNS issues on my network. My DC is my DNS server 10.76.4.11 and recently I configured a forwarder to 10.4.36.10. My workstations are not working because they cannot resolve the domain controller name because of DNS. an ipconfig /all reveals that they know the IP of the DNS server is 10.76.4.11, but if I nslookup 10.76.4.11 it forwards the request to 10.4.36.10 and goes nowhere. I have since removed the forwarder, but still any nslookup requests on workstations are going to 10.4.36.10. If I nslookup 10.76.4.11 on the server it can resolve its name, but for some reason when it receives the same request from workstations it doesnt know what to do. All the A, CNAME records etc are correct. DHCP's DNS is set correctly, GPOs are correct (even though they cant refresh cos of this problem!), the servers network adapter has its DNS set to 10.76.4.11. Just don't know. Very confused.

  Read the article

• Server 2008 Disk Management Hangs

  - by Payson Welch

  So I have looked everywhere for the solution to this and have tried many things. There is one post on SE related to this and I tried the suggested answer but I am still having problems. We have a server running Server 2008 R2 Standard x64. I need to increase the space of C: since the free space is running very low. However when I open Server Manager and try to go to the "Disk Management" snap-in it just hangs. There is a status message on the bottom of the window that says "Connecting to Virtual Disk Service...". Here are the steps I have taken: Ran sfc /scannow Set all of the drives to be dirty and rebooted so that they would be scanned Executed chkdsk /f /r /b /v on all of the drives. Checked for Windows updates (none). Verified that the services "Virtual Disk", "RPC Procedures" and "Plug and Play" are all running. One symptom is that the service "Virtual Disk" does not cleanly shut down. I receive a message about the process being unexpectedly terminated when I try to stop or restart it. Also I cannot find anything relevant in the event logs. Any ideas or suggestions?

  Read the article

• How to Protect Sensitive (HIPAA) SQL Server Standard Data and Log Files

  - by Quesi

  I am dealing with electronic personal health information (ePHI or PHI) and HIPAA regulations require that only authorized users can access ePHI. Column-level encryption may be of value for some of the data, but I need the ability to do like searches on some of the PHI fields such as name. Transparent Data Encryption (TDE) is a feature of SQL Server 2008 for encrypting database and log files. As I understand it this prevents someone who gains access to the MDF, LDF, or backup files from being able to do anything with the files because they are encrypted. TDE is only on enterprise and developer versions of SQL Server and enterprise is cost-prohibitive for my particular scenario. How can I get similar protection on SQL Server Standard? Is there a way to encrypt the database and backup files (is there a third-party tool)? Or just as good, is there a way to prevent the files from being used if the disk were attached to another machine (linux or windows)? Administrator access to the files from the same machine is fine, but I just want to prevent any issues if the disk were removed and hooked up to another machine. What are some of the solutions for this that are out there?

  Read the article

• ClearType setting ignored in Windows Virtual PC with Windows XP Pro

  - by Yadyn

  I have a VM set up through Windows Virtual PC for Windows XP Pro and I have been completely unable to get ClearType to work. I have turned it on in the Display - Appearance - Effects dialog but it seems like it completely ignores this. All text is still without any anti-aliasing. Even setting it to normal smoothing doesn't work. If I disable Integration Features, it seems to work, but then I lose a lot of nice features. What's weirder, is that the Windows XP Mode installed with Windows Virtual PC (this is separate from my XP Pro VM) works with both ClearType and Integration Features just fine. I turned it on the same way and it works like a charm, no problems. I'm running Windows 7 Professional 64-bit as the host OS and have the latest (to my knowledge) Windows Virtual PC installed. The only funny business I can think of is that I've enabled 24-bit color via the Group Policy setting inside each XP virtual machine (both Pro and the stripped down XP mode copy). This is a fairly well-known trick documented all over the web, but here's a typical post about it.

  Read the article

• Windows Server 2008 R2, weird intermittent outgoing connection issues, & Hyper-V Virtual Network

  - by brizz

  My provider says that they run an 'unfiltered' network, so it's not a network issue. Not entirely convinced...but they aren't being very helpful. Basically two days ago started having issues with DNS completely stop working for anywhere between 2-20minutes. This happens roughly every 1-2 hours at least once. I later then found that I am unable to ping ANY external IP address when this is going on. So it's not a DNS issue. Whats even more odd is when this is going on, I STAY connected via RDP, and I can access webpages, etc that are on the server when I access from my home computer. Have tried disabling the firewall--no fix. Have checked Event viewer, the only thing that is there is a warning that DNS has stopped working. I have made no changes/updates to the server. The only thing I have done is add an IP address (don't think it has anything to do with the problem, but wanted to mention everything). Any help/insight/suggestions on how to go about debugging would be much appreciated! update: I am also running Hyper-V, and a virtual network. I just tried pinging (when I have issues), from a Hyper-V machine--and it works, when the main server doesn't.

  Read the article

• Apache start failing after apache config modifications, showing syntax error, cannot load php5apache2_2.dll into server

  - by Sandeepan Nath

  I am stuck again with apache setup guys. I am working on a Windows 7 system. I copied the working php5 installation directory from teammates, copied the necessary .dll files from inside php5 installation folder (like they were in the working setup of teammates) to my windows/system32/. Apache server started successfully with the default apache config file. I was able to access localhost in browser. But php code was not parsing. I noticed no such line like the following in the apache config file:- # PHP5 module LoadModule php5_module D:/php5/php5apache2_2.dll If I add this line, apache server start fails. Running test configuration gives the following error - httpd.exe: Syntax error on line 60 of C:/Program Files (x86)/Apache Software Foundation/Apache2.2/conf/httpd.conf: Cannot load D:/php5/php5apache2_2.dll into server: The specified procedure could not be found. But the dll file is there in the specified location and I have given all permissions to the current system user to the php5 installation directory. The same line also appears in the apache error log, though I am not sure when exactly logs are written to the log file. I am confused if log entries are not made if I have opened the log file for reading? lol ... because I could not observe a pattern in when entries are made. I saw some log entries being made, some not. Oh, why is apache setup such a headache always????

  Read the article

• Windows Server 2008 R2 64bit Screen Frozen and Remote Desktop Freezes but Server Continues Working

  - by Jacques

  I've asked this question a couple of times but I don't seem to be getting any real answers. We have a SBS (Windows Server 2008 Rc) server and suddenly the screen has started freezing. Even when we go into the system via remote desktop it worked once or twice (since the problem started), but now the RDP screen freezes once it gets just past the Welcome screen. The server itself is running, SQL is working, Exchange is working, file share is fine. It's just the UI that isn't working. We've tried hard resetting and that works for a short while before the problem comes back. Where do we begin to resolve this issue? Thanks, Jacques

  Read the article

• Separating user resources - Windows Server 2008 (Terminal Server)

  - by Christopher Wilson

  At the moment I am running a Windows Terminal Server 2008 for around 10 clients that use the server to run programs and access data. Is there anyway to separate the resources of each user so that they do not impact each other in terms of resources. User 1: Opens program User 2: Notices slow down I have looked into using Windows System Resource Manager but do not know if it provides what I need and if there are any other 3rd party tools that also provide this functionality. Any answer is appreciated. Server Specs: HP ProLiant ML110 G7 Processor: Intel® Xeon® E3-1220 (4 core, 3.1 GHz, 8MB, 80W, 1333/t) RAM: 12GB DDR3 ECC 1TB HDD

  Read the article

• Possible DNS issue after a reinstall of Windows Server 2000 (get off my lawn)

  - by cop1152

  I just replaced a drive on a Win2000 Server that replicates AD and issues out DHCP at one of our offices. I successfully joined it to the domain, setup range of IP's, etc, but am still having issues. I cannot RDC to it with name or IP. I can ping it, browse to it with Windows Explorer, and remote to it with some other software, but not RDC. The other issue is this: Users are unable to authenticate on it. They receive the message 'username or password incorrect' (or something like that). Changes made on the main domain controller seem to take forever to trickle down. The most significant entry in the DNS Server Log is Event ID 7062: The DNS Server Encountered a Packet Addressed to Itself. At least, I think its significant. The Directory Services Log shows numerous Event IDs 1265: The attempt to establish a replication link with parameters failed with the following status: The DSA operation is unable to proceed because of a DNS lookup failure. Does this make any sense to anyone? I feel like its something very simple that I am overlooking. Thanks in advance.

  Read the article

• Keep printed documents on Windows Server 2008 R2 Print Server

  - by MadBoy

  I've setup Windows 2008 R2 as print server. I have checked option Keep printed document option for all printers and it works fine. Users print their stuff and i can see what they are doing. Problem is everyone sees all documents that are getting printed which is not always the best idea. Is there a way to: Limit print jobs to be only seen by people who printed them and admins Limit print jobs to be only seen on server (from within Server Manager) and so print jobs dissapear when print job is done from user queue (but then admins are still able to see it and track what's printed and when for reporting purposes). Create some kind of access level list so that some people can see everything geting printed, some people see their print jobs and some people see nothing :-)

  Read the article

• How do I install the evaluation version of Windows Server 2012R2 VHD within a Windows Server 2008R2 Hyper-V system?

  - by Paul Hale

  I have a windows server 2008R2 running hyper-v. I have downloaded the Windows Server 2012RC DC Version from here... http://technet.microsoft.com/en-us/evalcenter/dn205286.aspx I am "forced" to install a download app that copy's a .vhd file to my chosen directory. The instructions on this page... http://technet.microsoft.com/library/dn303418.aspx say... To install the VHD Download the VHD file. Start Hyper-V Manager. On the Action menu, select Import Virtual Machine. Navigate to the directory that the virtual machine file was extracted to and select the directory (not the directory where the VHD file is located). Select the Copy the virtual machine option. Confirm that the import was successful by checking Hyper-V Manager. Configure the network adapter for the resulting virtual machine: right-click the virtual machine and select Settings. In the left pane, click Network Adapter. In the menu that appears, select one of the network adapters of the virtualization server, and then click OK. Start the virtual machine. Where it says "Navigate to the directory that the virtual machine file was extracted to and select the directory (not the directory where the VHD file is located). Select the Copy the virtual machine option." Well nothing has been extracted as far as I can tell? and if it has, I have no idea where or what im looking for? I tried creating a new VM and using the downloaded .vhd file but I got an error saying that the .vhd file is an incompatible format. Can anybody help me out please? Thanks, Paul

  Read the article

• Dual boot windows 8 pro and windows 7 on XPS 8500 Special Edition

  - by Jesse

  I am trying to install a dual boot with windows 7 premium and windows 8 Pro on an XPS 8500 special edition. I created a new primary partition on my C: drive, inserted the windows 8 install disk, and rebooted my computer from DVD. I select custom install and the dialog box saying "Where do you want to install windows at?" pops up but none of my drives are listed. Please help me determine what is going on. I don't understand why none of my drives are showing up on this menu. Not even the original drive. When I go to load driver and click on the partition I created it tells me "No signed device drivers were found. Make sure the installation media contains the correct drivers, and then click OK." resolved above issue by running setup from the source folder on the install disk instead of booting from DVD. Was able to locate my new partition and start install. It completes the first step of "Copying windows files" just fine but then on the next step "Getting files ready for installation" my computer restarts and attempts to load windows 8 but keeps telling me my pc needs to restart. This keeps going on in an infinite boot loop. Please help, this has been a nightmare!

  Read the article

• Windows Server 2008 R2 DNS Server Intermittently Unresponsive

  - by Ablue

  Throughout the day out DNS servers (2x Win 2k8 R2 servers) are unable to respond to requests. The requests that fail are all on the .root zone that are either cached or obtained from 1 of 5 DNS servers we forward to before going to root hints. At first I thought the DNS servers we were forwarding to were flaky. So I added some more in. Currently the forwarding list looks like ISP DNS 1 OPEN DNS 1 ISP DNS 2 OPEN DNS 2 ISP DNS 3 I have tried: Turning off root hints. Set record scavenging to 7 days. Using dnscmd /config /EnableEDNSProbes 0 as per this. Packet capture at the DNS server shows that there is a lot of query responses with server failure between lan clients and the local dns server; it does not appear to be forwarding those requests. So maybe a problem with caching? Anyhow, does anything have anything I can try to get this working?

  Read the article

• Server 2003 RAS Server Utilising High WAN Traffic

  - by Joe Sergeant

  We have Routing and Remote Access configured on Server 2003 (also our primary domain controller), allowing users to connect in remotely to access files, email, etc. With one user, the RAS Server is constantly sending data to that user's remote computer. From 9am this morning it has transferred almost 800MB. The user isn't transferring any files remotely, certainly not enough to total 800MB anyway. None of the other remote users have had this issue. We have ensured that the user in question has "Use default gateway on remote network" disabled for both IPv4 and IPv6 and we are fairly confident that Offline Files isn't trying to synchronise with the server remotely, too. My question is two-fold. Firstly, has anyone had a similar experience? Secondly, what would be the best software to discover exactly what data is being sent to the remote user?

  Read the article

• SQL Server 2008 R2 Error 15401 when trying to add a domain user

  - by Alice

  I am trying to add a domain user. I am doing the following. Expand Security Right click on Logins Select New Login... Login name select search Click on location and select entire directory Type username Click checkname The name goes underlined and add some more info Click OK Click OK I then get the following error: I have found http://support.microsoft.com/kb/324321. The Login does exist There is no Duplicate security identifiers Authentication failure I don't think is happening as I can browse AD Case sensitivity should not be the problem as I am doing the checkname and it is correcting it. Not a Local account Name resolution again I can see the AD I have rebooted the server (VM) and the issue is still happening. Any ideas? Edit I have also: Domain member: Digitally encrypt secure channel data (when possible) – Disable this policy Domain member: Digitally sign secure channel data (when possible) – Disable this policy Rebooted server http://talksql.blogspot.com/2009/10/windows-nt-user-or-group-domainuser-not.html Edit 2 I have also: Digitally encrypt or sign secure channel data (always)- Disabled Rebooted Edit 3 Since the question have moved site I no longer haves access to comment etc... I have checked the dns on the server to a machine where it is working. The DNS servers are the same on both...

  Read the article

• Windows VPN for remote site connection drawbacks

  - by Damo

  I'm looking for some thoughts on a particular way of setting up a estate of machines. We have a requirement to install machines into unmanned, remote locations. These machines will auto login and perform tasks controlled from a central server. In order to manage patching, AV, updates etc I want these machines to be joined to a dedicated domain for this estate. Some of the locations will only have 3G connectivity (via other hardware), others will be located on customer premises in internal networks. The central server (of ours) and the Domain Controller will be on a public WAN. I see two ways of facilitating this. Install a router at each location and have a site to site VPN between the remove device and the data centre where the servers are location Have the remote machine dial up and authenticate via a Windows VPN connection to the DC via RAS Option one is more costly to setup and has a higher operational cost. It also offers better diagnostics if the remote PC goes down. Option two works well but is solely dependent on the VPN connection been made before any communication can be made to the remote machine. In a simple test, I can got a Windows 7 machine to dial a VPN prior to authentication to a domain, then automatically login to the machine using domain credentials. If the VPN connection drops, it redials. I can also create a timed task to auto connect every hour in case of other issues. I'd like to know, why (if at all) is operating a remote network of devices which are located in various out of band locations in this way a bad idea? Consider 300-400 remote machines all at different sites. I'd rather have 400 VPN connections to a 2008 server than 400 routers, however I'd like to know other opinions on this.

  Read the article

• Window Server 2003 Print spooler

  - by mikenardone

  Hello Everyone in ServerFault, I am new to this website. I have been coming here to fix my own problems. I believe everyone here on this website is great. I could not find this issue anywhere. I am sure that other people had this issue. I have IBM X3850 48GB ram 2 TB of hard drives, four NIC cards. 2 Xeon 1.7 CPU. I am running VMware ESX. I believe that was the paid version if not then it is ESXI. I have 7 Servers on this server. All Window server 2003. On one of the Servers I keep on getting CPU is at 100% . So when I go into task manager and look at the processes that is going on, it is my print spooler. I have 30 different HP laserjet printers and two copiers from HP. I believe it is an driver issue, but I can't figure with one is doing this. Is there any programs for window server 2003 that finds bad print drivers.

  Read the article

• Windows Server 2008 R2 running at a snail's pace

  - by Django Reinhardt

  Really weird problem here. Our main web server has started running at a snail's pace, for absolutely no reason we can discern. Even after restarting the machine, when there's no little or no ram usage and CPU usage is fluctuating between 0 and 30%, simple tasks, like opening Internet Explorer, or waiting for My Computer to open, take forever. There are no processes hogging system resources that we can see... the machine itself is just exhibiting extremely slow behaviour. I've never seen a machine do this. A lot of security updates had built up, so we decided to let Windows install them. When we looked through the history upon restarting, though, they had failed with error code 800706BA. I don't know if this could be related or not. Any help in this matter would be greatly appreciated. As mentioned in the title, we're running a Windows Server 2008 R2 machine. It's also running SQL Server and IIS. It has 16GB of RAM and a decent Quad Core processor. It's also been fine until now -- and we haven't changed a thing. Thanks for any help.

  Read the article

< Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >