Search Results

Search found 10759 results on 431 pages for 'auto detect'.

Page 105/431 | < Previous Page | 101 102 103 104 105 106 107 108 109 110 111 112  | Next Page >

  • C# 4.0: Alternative To Optional Arguments

    - by Paulo Morgado
    Like I mentioned in my last post, exposing publicly methods with optional arguments is a bad practice (that’s why C# has resisted to having it, until now). You might argument that your method or constructor has to many variants and having ten or more overloads is a maintenance nightmare, and you’re right. But the solution has been there for ages: have an arguments class. The arguments class pattern is used in the .NET Framework is used by several classes, like XmlReader and XmlWriter that use such pattern in their Create methods, since version 2.0: XmlReaderSettings settings = new XmlReaderSettings(); settings.ValidationType = ValidationType.Auto; XmlReader.Create("file.xml", settings); With this pattern, you don’t have to maintain a long list of overloads and any default values for properties of XmlReaderSettings (or XmlWriterSettings for XmlWriter.Create) can be changed or new properties added in future implementations that won’t break existing compiled code. You might now argue that it’s too much code to write, but, with object initializers added in C# 3.0, the same code can be written like this: XmlReader.Create("file.xml", new XmlReaderSettings { ValidationType = ValidationType.Auto }); Looks almost like named and optional arguments, doesn’t it? And, who knows, in a future version of C#, it might even look like this: XmlReader.Create("file.xml", new { ValidationType = ValidationType.Auto });

    Read the article

  • New Whitepaper: Best Practices for Gathering EBS Database Statistics

    - by Elke Phelps (Oracle Development)
    Most Oracle Applications DBAs and E-Business Suite users understand the importance of accurate database statistics.  Missing, stale or skewed statistics can adversely affect performance.  Oracle E-Business Suite statistics should only be gathered using FND_STATS or the Gather Statistics concurrent request. Gathering statistics with DBMS_STATS or the desupported ANALYZE command may result in suboptimal executions plans for E-Business Suite. Our E-Business Suite Performance Team has been busy implementing and testing new features for gathering statistics using FND_STATS in Oracle E-Business Suite databases.  The new features and guidelines for when and how to gather statistics are published in the following whitepaper: Best Practices for Gathering Statistics with Oracle E-Business Suite (Note 1586374.1) The new white paper details the following options for gathering statistics using FND_STATS and the Gather Statistics concurrent request:: History Mode - backup existing statistics prior to gather new statistics GATHER_AUTO Option - gather statistics for tables based upon % change Histograms - collect statistics for histograms AUTO Sampling - use the new FND_STATS feature that supports the AUTO option for using AUTO sample size Extended Statistics - use the new FND_STATS feature that supports the creation of column groups and automatic statistics collection on the column groups when table statistics are gathered Incremental Statistics - gather incremental statistics for partitioned tables The new white paper also includes examples and performance test cases for the following: Extended Optimizer Statistics Incremental Statistics Gathering Concurrent Statistics Gathering This white paper includes details about the standalone Oracle E-Business Suite Release 11i and 12 patches that are required to take advantage of this new functionality. Your feedback is welcome We would be very interested in hearing about your experiences with these new options for gathering statistics.  Please feel free to post your comments here or drop us a line privately.Related Oracle OpenWorld 2013 Session Getting Optimal Performance from Oracle E-Business Suite (CON8485) Related My Oracle Support Notes Collecting Statistics with Oracle EBS 11i and R12 (Note 368252.1) Non-EBS Related Blogs, White Papers and My Oracle Support Notes  Oracle Optimizer Blog Understanding Optimizer Statistic (white paper) Fixed Objects Statistics(GATHER_FIXED_OBJECTS_STATS) Considerations (Note 798257.1)

    Read the article

  • Javascript autotab function not working on iPad or iPhone [migrated]

    - by freddy6
    I have this this piece of html code: <form name="postcode" method="post" onsubmit="return OnSubmitForm();"> <input class="postcode" maxlength="1" size="1" name="c" onKeyup="autotab(this, document.postcode.o)" /> <input class="postcode" maxlength="1" size="1" name="o" onKeyup="autotab(this, document.postcode.d)" /> <input class="postcode" maxlength="1" size="1" name="d" onKeyup="autotab(this, document.postcode.e)" /> <input class="postcode" maxlength="1" size="1" name="e" /> <br /> </form> which uses this javascript: <script> /* Auto tabbing script- By JavaScriptKit.com http://www.javascriptkit.com This credit MUST stay intact for use */ function autotab(original,destination){ if (original.getAttribute&&original.value.length==original.getAttribute("maxlength")) destination.focus() } </script><script src="http://ajax.googleapis.com/ajax/libs/jquery/1.4/jquery.min.js" type="text/javascript"></script> <script src="js/scripts.js" type="text/javascript"></script> <script type="text/javascript"> function OnSubmitForm() { if(document.postcode.operation[0].checked == true) { document.postcode.action ="plans.php"; } else if(document.postcode.operation[1].checked == true) { document.postcode.action ="plans_gas.php"; } else if(document.postcode.operation[2].checked == true) { document.postcode.action ="plans_duel.php"; } return true; } </script> As soon a you enter in one character into one of the text boxes it automatically tabs across the the next text box. This works fine on a pc or mac and on safari and also in all other browsers. But when viewing the webpage on an iPad or iPhone (using safari) the auto tabbing function does not work. Any ideas on how to make the auto tab work on these mobile devices?

    Read the article

  • How do I configure networking when using XEN on 12.04 Server

    - by Ingram
    I'm following this guide, https://help.ubuntu.com/community/XenProposed, and I'd like to setup a static IP address, but I don't know how. I'm using 12.04 Server. This is the step I'm having trouble at (I'm using eth1): Edit /etc/network/interfaces, and make it look like this: auto lo iface lo inet loopback auto xenbr0 iface xenbr0 inet dhcp bridge_ports eth0 auto eth0 iface eth0 inet manual I do this, and here is my output from ifconfig: eth1 Link encap:Ethernet HWaddr 00:17:a4:f8:79:20 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:478264 errors:0 dropped:0 overruns:0 frame:0 TX packets:2895 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:46470058 (46.4 MB) TX bytes:214620 (214.6 KB) Interrupt:17 Memory:fa000000-fa012800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) xenbr0 Link encap:Ethernet HWaddr 00:17:a4:f8:79:20 inet addr:192.168.1.122 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::217:a4ff:fef8:7920/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:471842 errors:0 dropped:0 overruns:0 frame:0 TX packets:2795 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:37005780 (37.0 MB) TX bytes:182010 (182.0 KB) So how do I give this system a static IP address? Sorry, I'm not that familiar with networking on Ubuntu.

    Read the article

  • Setting up shared connection

    - by Calvin Froedge
    I have a network that is connected to the internet via a switch connected to a router. I have it setup like this so I can work on the new network without causing problems on the old. Anyway, I'm trying to enable internet connection sharing. Internet comes to server like this: Modem - Router - Switch - Ubuntu 11.10 (Eth0) I want to share the connection through Eth1 (Eth1 - Managed Switch - Clients). Here is my config for /etc/network/interfaces: I have a DHCP server running on Eth1. Here is my config: ddns-update-style none; option domain-name "myserver.local"; option domain-name-servers 192.168.1.2, 8.8.8.8; default-lease-time 600; max-lease-time 7200; authoritative; subnet 192.168.1.0 netmask 255.255.255.0 { interface eth1; range 192.168.1.3 192.168.1.254; option routers 192.168.1.1; option subnet-mask 255.255.255.0; option broadcast-address 192.168.1.255; } Here is /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp #Used for internal network auto eth1 iface eth1 inet static address 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255 network 192.168.1.0 Here is /etc/hosts: 127.0.0.1 localhost 127.0.1.1 myserver.isp.com server 192.168.1.2 server.myserver.local server myserver.local In /etc/sysctl.conf, I've set the following: net.ipv4.ip_forward=1 Finally, in /etc/rc.local, I've set the following: /sbin/iptables -P FORWARD ACCEPT /sbin/iptables --table nat -A POSTROUTING -o eth1 -j MASQUERADE When I ping 8.8.8.8 (google's DNS) from a client that is authenticated with my DHCP server (they have been assigned a local ip, like 192.168.1.10), I get a timeout. How can I debug this further to figure out where my problem is?

    Read the article

  • Center Page Content Horizontally using Div with CSS

    - by Aamir Hasan
    Center your website content to create equal sized Space from  the left and right using css. Horizontally centered by setting its right and left margin widths to "auto". This is the preferred way to accomplish horizontal centering with CSS. Create a warpper div which will hold your content div and then give it a margin:auto attribute which will bring your warpper div into center of page.<html><head><title>Center Page Content Horizontally and Vertically using Div with CSS </title> <style type="text/css">body{background-color:#eaeaea;}  #wrapper {width: 777px;margin:auto}  #content{background-color:#00FF00;min-height:400px;}  </style>  </head>  <body>  <form id="form1" runat="server">  <div id="wrapper"> <div id="wrapper">  <div id="content">  Welcome to Studentacad.com  </div>  </div>  </form>  </body></html>

    Read the article

  • Common Live Upgrade problems

    - by user12611829
    As I have worked with customers deploying Live Upgrade in their environments, several problems seem to surface over and over. With this blog article, I will try to collect these troubles, as well as suggest some workarounds. If this sounds like the beginnings of a Wiki, you would be right. At present, there is not enough material for one, so we will use this blog for the time being. I do expect new material to be posted on occasion, so if you wish to bookmark it for future reference, a permanent link can be found here. Live Upgrade copies over ZFS root clone This was introduced in Solaris 10 10/09 (u8) and the root of the problem is a duplicate entry in the source boot environments ICF configuration file. Prior to u8, a ZFS root file system was not included in /etc/vfstab, since the mount is implicit at boot time. Starting with u8, the root file system is included in /etc/vfstab, and when the boot environment is scanned to create the ICF file, a duplicate entry is recorded. Here's what the error looks like. # lucreate -n s10u9-baseline Checking GRUB menu... System has findroot enabled GRUB Analyzing system configuration. Comparing source boot environment file systems with the file system(s) you specified for the new boot environment. Determining which file systems should be in the new boot environment. Updating boot environment description database on all BEs. Updating system configuration files. Creating configuration for boot environment . Source boot environment is . Creating boot environment . Creating file systems on boot environment . Creating file system for in zone on . The error indicator ----- /usr/lib/lu/lumkfs: test: unknown operator zfs Populating file systems on boot environment . Checking selection integrity. Integrity check OK. Populating contents of mount point . This should not happen ------ Copying. Ctrl-C and cleanup If you weren't paying close attention, you might not even know this is an error. The symptoms are lucreate times that are way too long due to the extraneous copy, or the one that alerted me to the problem, the root file system is filling up - again thanks to a redundant copy. This problem has already been identified and corrected, and a patch (121431-58 or later for x86, 121430-57 for SPARC) is available. Unfortunately, this patch has not yet made it into the Solaris 10 Recommended Patch Cluster. Applying the prerequisite patches from the latest cluster is a recommendation from the Live Upgrade Survival Guide blog, so an additional step will be required until the patch is included. Let's see how this works. # patchadd -p | grep 121431 Patch: 121429-13 Obsoletes: Requires: 120236-01 121431-16 Incompatibles: Packages: SUNWluzone Patch: 121431-54 Obsoletes: 121436-05 121438-02 Requires: Incompatibles: Packages: SUNWlucfg SUNWluu SUNWlur # unzip 121431-58 # patchadd 121431-58 Validating patches... Loading patches installed on the system... Done! Loading patches requested to install. Done! Checking patches that you specified for installation. Done! Approved patches will be installed in this order: 121431-58 Checking installed patches... Executing prepatch script... Installing patch packages... Patch 121431-58 has been successfully installed. See /var/sadm/patch/121431-58/log for details Executing postpatch script... Patch packages installed: SUNWlucfg SUNWlur SUNWluu # lucreate -n s10u9-baseline Checking GRUB menu... System has findroot enabled GRUB Analyzing system configuration. INFORMATION: Unable to determine size or capacity of slice . Comparing source boot environment file systems with the file system(s) you specified for the new boot environment. Determining which file systems should be in the new boot environment. INFORMATION: Unable to determine size or capacity of slice . Updating boot environment description database on all BEs. Updating system configuration files. Creating configuration for boot environment . Source boot environment is . Creating boot environment . Cloning file systems from boot environment to create boot environment . Creating snapshot for on . Creating clone for on . Setting canmount=noauto for in zone on . Saving existing file in top level dataset for BE as //boot/grub/menu.lst.prev. Saving existing file in top level dataset for BE as //boot/grub/menu.lst.prev. Saving existing file in top level dataset for BE as //boot/grub/menu.lst.prev. File propagation successful Copied GRUB menu from PBE to ABE No entry for BE in GRUB menu Population of boot environment successful. Creation of boot environment successful. This time it took just a few seconds. A cursory examination of the offending ICF file (/etc/lu/ICF.3 in this case) shows that the duplicate root file system entry is now gone. # cat /etc/lu/ICF.3 s10u8-baseline:-:/dev/zvol/dsk/panroot/swap:swap:8388608 s10u8-baseline:/:panroot/ROOT/s10u8-baseline:zfs:0 s10u8-baseline:/vbox:pandora/vbox:zfs:0 s10u8-baseline:/setup:pandora/setup:zfs:0 s10u8-baseline:/export:pandora/export:zfs:0 s10u8-baseline:/pandora:pandora:zfs:0 s10u8-baseline:/panroot:panroot:zfs:0 s10u8-baseline:/workshop:pandora/workshop:zfs:0 s10u8-baseline:/export/iso:pandora/iso:zfs:0 s10u8-baseline:/export/home:pandora/home:zfs:0 s10u8-baseline:/vbox/HardDisks:pandora/vbox/HardDisks:zfs:0 s10u8-baseline:/vbox/HardDisks/WinXP:pandora/vbox/HardDisks/WinXP:zfs:0 Solaris 10 9/10 introduces new autoregistration file This one is actually mentioned in the Oracle Solaris 9/10 release notes. I know, I hate it when that happens too. Here's what the "error" looks like. # luupgrade -u -s /mnt -n s10u9-baseline System has findroot enabled GRUB No entry for BE in GRUB menu Copying failsafe kernel from media. 61364 blocks miniroot filesystem is Mounting miniroot at ERROR: The auto registration file does not exist or incomplete. The auto registration file is mandatory for this upgrade. Use -k argument along with luupgrade command. autoreg_file is path to auto registration information file. See sysidcfg(4) for a list of valid keywords for use in this file. The format of the file is as follows. oracle_user=xxxx oracle_pw=xxxx http_proxy_host=xxxx http_proxy_port=xxxx http_proxy_user=xxxx http_proxy_pw=xxxx For more details refer "Oracle Solaris 10 9/10 Installation Guide: Planning for Installation and Upgrade". As with the previous problem, this is also easy to work around. Assuming that you don't want to use the auto-registration feature at upgrade time, create a file that contains just autoreg=disable and pass the filename on to luupgrade. Here is an example. # echo "autoreg=disable" /var/tmp/no-autoreg # luupgrade -u -s /mnt -k /var/tmp/no-autoreg -n s10u9-baseline System has findroot enabled GRUB No entry for BE in GRUB menu Copying failsafe kernel from media. 61364 blocks miniroot filesystem is Mounting miniroot at ####################################################################### NOTE: To improve products and services, Oracle Solaris communicates configuration data to Oracle after rebooting. You can register your version of Oracle Solaris to capture this data for your use, or the data is sent anonymously. For information about what configuration data is communicated and how to control this facility, see the Release Notes or www.oracle.com/goto/solarisautoreg. INFORMATION: After activated and booted into new BE , Auto Registration happens automatically with the following Information autoreg=disable ####################################################################### Validating the contents of the media . The media is a standard Solaris media. The media contains an operating system upgrade image. The media contains version . Constructing upgrade profile to use. Locating the operating system upgrade program. Checking for existence of previously scheduled Live Upgrade requests. Creating upgrade profile for BE . Checking for GRUB menu on ABE . Saving GRUB menu on ABE . Checking for x86 boot partition on ABE. Determining packages to install or upgrade for BE . Performing the operating system upgrade of the BE . CAUTION: Interrupting this process may leave the boot environment unstable or unbootable. The Live Upgrade operation now proceeds as expected. Once the system upgrade is complete, we can manually register the system. If you want to do a hands off registration during the upgrade, see the Oracle Solaris Auto Registration section of the Oracle Solaris Release Notes for instructions on how to do that. Technocrati Tags: Oracle Solaris Patching Live Upgrade var sc_project=1193495; var sc_invisible=1; var sc_security="a46f6831";

    Read the article

  • mdadm: breaks boot due to "is not ready yet or not present" error

    - by BarsMonster
    This is so damn frustrating :-| I've spent like 20 hours on this nice error, and seems like dozens of people over Internet too, and no clear solution yet. I have non-system RAID-5 of 5 disks, and it's fine. But during boot up it says that "/dev/md0 is not ready yet or not present" and asks to press 'S'. Very nice for Ubuntu Server - I have to bring monitor and keyboard to go next. After this system boots and it's all fine. md0 device works, /proc/mdstat is fine. When I do mount -a - it mounts this array without errors and works fine. As a dumb and shameful workaround I added noauto in /etc/fstab, and did mounting in /etc/rc.local - it works fine then. Any hints how to make it work properly? fstab: UUID=3588dfed-47ae-4c32-9855-2d69df713b86 /var/bigfatdisk ext4 noauto,noatime,data=writeback,barrier=0,nobh,commit=5 0 0 mdadm config: It is autogenerated: # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR CENSORED # definitions of existing MD arrays ARRAY /dev/md/0 metadata=1.2 bitmap=/var/md0_intent UUID=efccbeb6:a0a65cd6:470dcdf3:62781188 name=LBox2:0 # This file was auto-generated on Mon, 10 Jan 2011 04:06:55 +0200 # by mkconf 3.1.2-2

    Read the article

  • Have to run sudo dhclient eth0 automatically every boot

    - by Fyksen
    I just installed ubuntu 12.04.1 alternative install (for raid 0 on some disks). I Have some problems with the net. I'm at school, we use cable, and it got IPv6. If I run ifconfig eth0 heres my output: eth0 Link encap:Ethernet HWaddr e0:cb:4e:87:ff:db inet addr:128.39.194.217 Bcast:128.39.194.223 Mask:255.255.255.224 inet6 addr: 2001:700:1100:8008:e2cb:4eff:fe87:ffdb/64 Scope:Global inet6 addr: fe80::e2cb:4eff:fe87:ffdb/64 Scope:Link inet6 addr: 2001:700:1100:8008:48f7:c23:1d87:da6c/64 Scope:Global UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1063378 errors:0 dropped:0 overruns:0 frame:0 TX packets:489811 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1577173461 (1.5 GB) TX bytes:37043669 (37.0 MB) Interrupt:68 Base address:0x6000 My /etc/network/interfaces look like this: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 # NetworkManager#iface eth0 inet dhcp # NetworkManager#hostname 2001:700:1100:1::4 # This is an autoconfigured IPv6 interface iface eth0 inet6 auto (I had to remove the hash tags, because of the BIGFONT i get on ask ubuntu) The "network manager" says that I'm not connected. Let me know if you need any more information. :)

    Read the article

  • mdadm: brakes boot due to "is not ready yet or not present" error

    - by BarsMonster
    This is so damn frustrating :-| I've spent like 20 hours on this nice error, and seems like dozens of people over Internet too, and no clear solution yet. I have non-system RAID-5 of 5 disks, and it's fine. But during boot up it says that "/dev/md0 is not ready yet or not present" and asks to press 'S'. Very nice for Ubuntu Server - I have to bring monitor and keyboard to go next. After this system boots and it's all fine. md0 device works, /proc/mdstat is fine. When I do mount -a - it mounts this array without errors and works fine. As a dumb and shameful workaround I added noauto in /etc/fstab, and did mounting in /etc/rc.local - it works fine then. Any hints how to make it work properly? fstab: UUID=3588dfed-47ae-4c32-9855-2d69df713b86 /var/bigfatdisk ext4 noauto,noatime,data=writeback,barrier=0,nobh,commit=5 0 0 mdadm config: It is autogenerated: # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR CENSORED # definitions of existing MD arrays ARRAY /dev/md/0 metadata=1.2 bitmap=/var/md0_intent UUID=efccbeb6:a0a65cd6:470dcdf3:62781188 name=LBox2:0 # This file was auto-generated on Mon, 10 Jan 2011 04:06:55 +0200 # by mkconf 3.1.2-2

    Read the article

  • How to highlight non-rectangular hotspots?

    - by HuseyinUslu
    So my question is highly related to Creating non-rectangular hotspots and detecting clicks. Yet again, I've irregular hot-spots (think the game Risk). So basically, we can detect clicks on these hot-spots easily using color key mapping as discussed in above question which I don't have any problems implementing (which is also covered here in details). The problem is about highlighting these irreguar hotspots. So let me explain the question a bit more - the above color key mapping guide uses this as a world map: Then the author color-maps the imaginary countries: Now we can now detect the country the pointer is over. In the same article author mentions outlining countries on mouse-over. Though to get the effect, he creates unique border assets for each country - like: For the game I'm working on I'm using the same color-key mapping idea to detect hot-spots, but I didn't like the way of highlighting hot-spots. Coloring all the hot-spots is already a time-consuming job for me - as I have 25+ hot-spots for each map. Further, the need to have 25 unique border/highlight asset per hot-spot doesn't sound right. Anyone have a better idea/suggestion on highlighting these hot-spots?

    Read the article

  • How can I make an unmounted / unmountable NTFS disk not show up in the nautilus devices area?

    - by Dennis
    I have an idea that my /etc/fstab is a real mish-mash and I don't remember how it got that way, first of all it looks like this UUID=9EB80807B807DD21 /media/Storage ntfs-3g users 0 0 UUID=a60397fd-964a-45b1-ad35-53c8a4bee010 / ext4 defaults 0 1 UUID=1764825d-b8ba-4620-b3b0-e979b6f4f5c4 swap swap sw 0 0 UUID=255DA1E406E29DBC /media/sda2 ntfs-3g defaults 0 0 UUID=2CCCF161CCF1262C /mnt/sda1 ntfs-3g umask=000 0 0 /dev/fd0 /media/floppy0 vfat noauto 0 0 I started with an old XP install on disk /dev/sda that I don't use anymore but didn't want to delete, so I shrunk the XP partition, added a NTFS partition that would be common to both systems (Labeled it "Common" in XP), then installed Lucid on an extended ext4 partition. On this disk of course the ext4 system partition comes up as /, the go between partition auto-mounts on /media/sda1 but shows up in Nautilus as COMMOM, while the XP system disk does not show up in Nautilus, but I can get to it by navigating to /mnt/sda1. A second hard drive (/dev/sdb) that I stuck in was already formatted NTFS with a bunch of stuff and labeled "Storage". It auto-mounts to /media/Storage but another un-mounted disk also shows up in the Nautilus device area called Storage but it can't be mounted (Here and in the "Places" are the only times it appears) I would primarily like this non-existant (or already mounted depending on how you look at it) disk to not show up, but I wouldn't mind an explanation of why one labeled partition auto-mounts to a /media mount point but shows up by label, one does not show up as mounted at all but mounts to a /mnt mount point and is there for navigation, and one is mounted to a directory of the same name as the label. I would love to have some consistancy / direction on what is proper in this circumstance. No doubt I caused this with the fstab but I really don't remember what my rational was if I edited it manually

    Read the article

  • How can I make multiple displays work on my Asus UX32VD?

    - by oKtosiTe
    Original title: Why do I have two trash icons in the Unity Launcher? Whether I run Ubuntu as a live-USB or install it, I always have two trash bins on the Unity Launcher. Both work, and both open the same location. This seems a bit redundant; what could be done about it? Update: Turning auto-hide on made it obvious that I have multiple Launchers showing. With auto-hide off, they simply overlap, making it look like there's a double trash icon, but with auto-hide enabled, I can display one Launcher (and therefore one trash icon) at a time. Still, two are running simultaneously. Second update: This problem appears to be caused by the way Ubuntu handles multiple displays on my Asus UX32VD Ultrabook. Somehow, the laptop display cannot be used while my external display is connected. It is shown in the Displays list, but remains black no matter how I configure it. The external display runs at 1920x1200, the laptop monitor should run at 1920x1080. It therefore becomes obvious that the Launcher that's supposed to run on the laptop display, is actually displayed on the external monitor. Using nomodeset as a kernel parameter as indicated here makes the laptop display inaccessible altogether, detecting the external monitor as the laptop display and making resolutions other than 1920x1200 inaccessible. That is not an option.

    Read the article

  • Java JRE 7 Automatic Upgrade and Demantra Requirements - Action Required

    - by user702295
    The following applies to ALL Demantra, EBS and Demantra Oracle Integrations: All EBS desktop administrators must disable JRE Auto-Update for their end-users immediately. See this externally-published article:     URGENT BULLETIN: Disable JRE Auto-Update for All E-Business Suite End-Users     https://blogs.oracle.com/stevenChan/entry/bulletin_disable_jre_auto_update Why is this required? If you have Auto-Update enabled, your JRE 1.6 version will be updated to JRE 7.     This may happen as early as July 3, 2012.     This will definitely happen after Sept. 7, 2012, after the release of 1.6.0_35 (6u35).  Oracle Forms is not compatible with JRE 7 yet.  JRE 7 has not been certified with Oracle E-Business Suite yet. Oracle E-Business Suite functionality based on Forms -- e.g. Financials -- will stop working if you upgrade to JRE 7. Related News Java 1.6.0_33 is certified with Oracle E-Business Suite.  See this externally-published article:     Java JRE 1.6.0_33 Certified with Oracle E-Business Suite     https://blogs.oracle.com/stevenChan/entry/jre_1_6_0_33

    Read the article

  • Python Web Applications: What is the way and the method to handle Registrations, Login-Logouts and Cookies? [on hold]

    - by Phil
    I am working on a simple Python web application for learning purposes. I have chosen a very minimalistic and simple framework. I have done a significant amount of research but I couldn't find a source clearly explaining what I need, which is as follows: I would like to learn more about: User registration User Log-ins User Log-outs User auto-logins I have successfully handled items 1 and 3 due to their simple nature. However, I am confused with item 2 (log-ins) and item 4 (auto-logins). When a user enters username and password, and after hashing with salts and matching it in the DB; What information should I store in the cookies in order to keep the user logged in during the session? Do I keep username+password but encrypt them? Both or just password? Do I keep username and a generated key matching their password? If I want the user to be able to auto-login (when they leave and come back to the web page), what information then is kept in the cookies? I don't want to use modules or libraries that handle these things automatically. I want to learn basics and why something is the way it is. I would also like to point out that I do not mind reading anything you might offer on the topic that explains hows and whys. Possibly with algorithm diagrams to show the process. Some information: I know about setting headers, cookies, encryption (up to some level, obviously not an expert!), request objects, SQLAlchemy etc. I don't want any data kept in a single web application server's store. I want multiple app-servers to be handle a user, and whatever needs to be kept on the server to be done with a Postgres/MySQL via SQLAlchemy (I think, this is called stateless?) Thank you.

    Read the article

  • How to highlight non-rectengular hotspots?

    - by HuseyinUslu
    So my question is highly related to Creating non-rectangular hotspots and detecting clicks. Yet again, I've irregular hot-spots (think the game Risk). So basically, we can detect clicks on these hot-spots easily using color key mapping as discussed in above question which I don't have any problems implementing (which is also covered here in details). The problem is about highlighting these irreguar hotspots. So let me explain the question a bit more - the above color key mapping guide uses this as a world map; then the author color-maps the imaginary countries; which we can now detect the country the pointer is over. In the same article author mentions outlining countries on mouse-over; though to get the effect, he creates unique border assets for each country - like; So for the game I'm working on I'm using the same color-key mapping idea to detect hot-spots, but I didn't like the way of highlighting hot-spots. Coloring all the hot-spots is already a great work for me - as I've 25+ hot-spots for each map - further more the need to have 25 unique border/highlight asset per hot-spot doesn't sound right. Anyone have a better idea/suggestion on highlighting these hot-spots?

    Read the article

  • Wine causes twin view to break

    - by deanvz
    I have endlessly been playing around with the Nvidia X Server settings and changing my xorg.conf file to try and work for me and on most days its fine. In each instance I get it working for a while and then this morning the most bizarre thing happens. The moment I open any type of Wine program (which never use to be a problem) my Twin View setup disappears and am left with mirrored displays. I try and change the settings in the Nvidia driver, but its not interested and the screens remain mirrored. I have a work around. Restart my pc... Below are the contents of my current xorg.conf file. # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@zirconium) Fri Mar 30 13:43:34 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "LG Electronics W1934" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9400 GT" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "metamodes" "CRT-0: nvidia-auto-select +0+0, CRT-1: nvidia-auto-select +1440+0" SubSection "Display" Depth 24 EndSubSection EndSection

    Read the article

  • OSSEC HIDS Notification "Unknown problem somewhere in the system." (seems like hdd issue)

    - by John
    from what i understand somethings is wrong with hdd i am trying to find some commands in order to run some tests to check if hard disk is OK I will post a full list of logs after REBOOT of system: "Unknown problem somewhere in the system." kernel: ata2.00: failed command: READ FPDMA QUEUED kernel: res 51/40:c8:38:5c:16/00:00:00:00:00/40 Emask 0x409 (media error) <F> kernel: ata2.00: error: { UNC } kernel: ata2.00: failed command: READ FPDMA QUEUED kernel: res 51/40:78:88:5c:16/00:00:00:00:00/40 Emask 0x409 (media error) <F> kernel: sd 1:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] kernel: sd 1:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed kernel: md/raid1:md1: read error corrected (8 sectors at 1461400 on sda1) kernel: sd 1:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed kernel: sd 1:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed kernel: md/raid1:md1: read error corrected (8 sectors at 1461672 on sda1) Also some of this logs are duplicate or even more. Thanks.

    Read the article

  • Cannot get script to run at startup (tried all the simple answers)

    - by Carey Head
    I have Ubuntu Desktop 12.04 LTS running great on an older Acer desktop. I want to use this machine as an in-home server for hosting Minecraft. The command to start the Minecraft server is java -Xmx1024M -Xms1024M -jar minecraft_server.jar nogui and that works great when I cd into the correct directory and execute the above. I created a script to do this: #!/bin/bash cd /home/myuser/minecraft-server1 java -Xmx1024M -Xms1024M -jar minecraft_server.jar nogui & cd /home/myuser/minecraft-server2 java -Xmx1024M -Xms1024M -jar minecraft_server.jar nogui & exit 0 I made this .sh file executable, and it too runs great when I start it manually from the terminal. The problem I'm having is getting these to execute at startup. I have my user account on this machine to auto login. I have tried the following: Adding the following to "Startup Applications" : sh /home/myuser/myscript.sh (Nothing happens on reboot) Adding the same to /etc/rc.local (Nothing happens on reboot). I even tested this one by running /etc/rc.local from the terminal, and it executed great. Just not at boot/auto login Added the lines from the script directly to rc.local (Nothing happens on reboot). I can't help but think that there's something I'm missing. The script executes great when run manually, but will not run at boot/auto login. Many thanks in advance.

    Read the article

  • Crackling sound from microphone recently, in 13.04

    - by Patrig Droumaguet
    I use 13.04 since the release and I use Skype which was working well. But recently I've had remarks saying my voice was "crackling", even if the voice from my interlocutor was perfect. Making a test with Audacity and Cheese, I've seen that every recorded sound (with the front microphone of my laptop or a jack microphone) was crackling. It's not really like saturating, the sound has a lot of annoying pops. I've tried to check the settings, they were still on PulseAudio. I've even tried the extreme solution : re-installing Ubuntu (because initially it was working)… with the same problem. If I boot on Windows (dual-boot) I have no problem (so it's not physical). If anyone could help :) My laptop is a HP dv6-6165sf. The sound card is a "IDT 92HD81B1X5" (with BeatsAudio). Thanks a lot ! New tests - july 6th Hi again, I've tried editing /etc/pulse/default.pa with these three settings : load-module module-udev-detect use_ucm=0 tsched=0 load-module module-udev-detect tsched=0 load-module module-udev-detect use_ucm=0 The three of them don't change anything, except the last one (which was by default) which makes Audacity record without any crackling sound. But in Skype, Cheese and Kazam, the sound is crackling… I've installed again Ubuntu 13.04 (from scratch, deleting everything from /home), and I've updated it. The microphone is still cracking. Thanks for your help !

    Read the article

  • xubutnu Nvidia Settings not remembered

    - by hozza
    I have an Nvidia card and I'm using NVIDIA Driver Version: 304.51 and the NVIDIA X Server Settings GUI. Everything works fine but when I reboot and login again both my two screens are set to +0 +0 so they mirror each other... I change the settings to screen 2 (NEC LED) to be left of screen 1 (DELL) click Apply and Save to X Configuration File... It all works but when I login again the settings are not remembered... This is my xorg config file, can anyone help out? # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 304.51 (buildd@komainu) Fri Oct 12 12:53:49 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL 2005FPW" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 640" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-0" Option "metamodes" "DFP-0: nvidia-auto-select +1280+0, DFP-2: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

    Read the article

  • noexec option enabled in fstab is not getting applicable for limited user. Is it a bug?

    - by user170918
    noexec option enabled in fstab is not getting applicable for limited user. Is it a bug? cat /etc/fstab # / was on /dev/sda2 during installation UUID=fd7e2645-3cc4-4c6c-8b1b-016711c2fd07 / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda1 during installation UUID=f3e58f86-8999-4678-a5ec-0a4b621c6e37 /boot ext4 defaults 0 2 # /home was on /dev/sda9 during installation UUID=bcbc1c4d-46a9-4b2a-bb0a-6fe1bdeaed22 /home ext4 defaults,nodev,nosuid 0 2 # /tmp was on /dev/sda5 during installation UUID=8538eecc-bd16-40fe-ad66-7d7b9287839e /tmp ext4 defaults,noexec,nosuid,nodev 0 2 # /var was on /dev/sda6 during installation UUID=292696cf-fc15-40ab-9cd8-cee9bff7e165 /var ext4 defaults,nosuid,nodev 0 2 # /var/log was on /dev/sda7 during installation UUID=fab1f85b-ae09-4ce0-b169-c01205eb8f9c /var/log ext4 defaults,noexec,nosuid,nodev 0 2 # /var/log/audit was on /dev/sda8 during installation UUID=602f5003-4ac0-49e9-99d3-b29378ce9430 /var/log/audit ext4 defaults,noexec,nosuid,nodev 0 2 # swap was on /dev/sda3 during installation UUID=a538d35b-b2e9-47f2-b72d-5dbbcf0afca0 none swap sw 0 0 /dev/sdb1 /mnt/usblpsc auto noauto,user,rw,noexec,nosuid,nodev 0 0 /dev/sdc1 /mnt/usblpsc auto noauto,user,rw,noexec,nosuid,nodev 0 0 /dev/sdd1 /mnt/usblpsc auto noauto,user,rw,noexec,nosuid,nodev 0 0 sudo users are not able to paste executable files in /bin into the file system which have the noexec option set. But limited users are able to paste the same files into the file system which have noexec option set. Why is it so?

    Read the article

  • Ubuntu 13.10. After login, no desktop displayed. Two Nvidia Graphics Cards, Four Monitors

    - by jmerkow
    I am working on an issue with my Ubuntu 13.10 installation. I am attempting to get 4 monitors up and running but I am having some trouble. So far, I installed and updated to the latest NVIDIA drivers (331.20). Initially X would not start (after installation) so I replaced my xorg.conf with xorg.conf.failsafe. This fixed that problem, but then I tried to enable the other 2 monitors (other video card) and xorg fails to start once again (after I login there is no desktop). I am fairly new to linux but I am not a complete beginner, but I'm not comfortable poking around too much on my own to troubleshoot yet.... lspci -nn | grep VGA: 03:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF110 [GeForce GTX 570 Rev. 2] [10de:1086] (rev a1) 05:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF110 [GeForce GTX 580] [10de:1080] (rev a1) It seems that the nvidia-settings tool does not result in a good xorg.conf file. Here it is: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 331.20 (buildmeister@swio-display-x86-rhel47-05) Wed Oct 30 18:20:32 PDT 2013 Section "ServerLayout" Identifier "Default Layout" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection ... Section "Monitor" Identifier "Configured Monitor" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "SHARP HDMI" HorizSync 15.0 - 68.0 VertRefresh 55.0 - 76.0 EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "Samsung SyncMaster" HorizSync 0.0 - 0.0 VertRefresh 0.0 EndSection Section "Device" Identifier "Configured Video Device" Driver "vesa" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 570" BusID "PCI:3:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 580" BusID "PCI:5:0:0" EndSection Section "Screen" Identifier "Default Screen" Device "Configured Video Device" Monitor "Configured Monitor" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-1" Option "metamodes" "HDMI-0: nvidia-auto-select +640+0, DVI-I-3: nvidia-auto-select +0+1080" Option "SLI" "Off" Option "MultiGPU" "Off" Option "BaseMosaic" "off" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DVI-I-2: nvidia-auto-select +0+0" Option "SLI" "Off" Option "MultiGPU" "Off" Option "BaseMosaic" "off" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection

    Read the article

  • Jqgrid search option not working and edit popups not closed after submit

    - by Sajith
    i have facing two problem in Jqgrid. Search option not working and there is not closed editpopups after submit. my code below <table id="jQGridpending" style="width:auto"> </table> <div id="jQGridpendingPager"> </div> <table id="searchpending"></table> <div id="filterpending"></div> jQuery("#jQGridpending").jqGrid({ url: '@Url.Action("DiscountRequest", "Admin")', datatype: "json", mtype: "POST", colNames: [ "Id", "ClientName", "BpName", "Pdt", "DiscountReq", "DiscountAllowed", "Status", ], colModel: [ { name: "Id", width: 100, key: true, formatter: "integer", sorttype: "integer", hidden: true }, { name: "ClientName", width: 150, sortable: true,search:true,stype:'text', editrules: { required: false } }, { name: "BpName", width: 200, sortable: true, editable: false, editrules: { required: false } }, { name: "Pdt", width: 150, sortable: true, editable: false, editrules: { required: false } }, { name: "DiscountReq", width: 150, sortable: false, editable: false, editrules: { required: false } }, { name: "DiscountAllowed", width: 200, sortable: true, editable: true, editrules: { required: true } }, { name: 'Status', index: 'Status', width: 200, sortable: false, editable: true, formatter: 'select', edittype: 'select', editoptions: { value: "pending:pending;approved:approved;rejected:rejected" } }, @* { name: "Status", width: 200, sortable: false, editable: true, editrules: { required: true, minValue: 1, }, edittype: "select", editoptions: { async: false, dataUrl: "@Url.Action("GetStatus", "Admin")", buildSelect: function (response) { var s = "<select>"; s += '<option value="0">--Select--</option><option value="pending">pending</option>'; return s + "</select>"; } } },*@ //{ name: "Status", width: 150, sortable: true, editable: true, editrules: { required: true } }, //{ name: "Created", width: 120, formatter: "date", formatoptions: { srcformat: "ISO8601Long", newformat: "n/j/Y g:i:s A" }, align: "center", sorttype: "date" }, ], loadtext: "Processing pending request data please wait...", rowNum: 10, gridview: true, autoencode: true, loadonce: true, height: "auto", rownumbers: true, prmNames: { id: "Id" }, rowList: [10, 20, 30], pager: '#jQGridpendingPager', sortname: 'id', sortorder: "asc", viewrecords: true, jqModal: true, caption: "Pending List", reloadAfterSubmit: true, editurl: '@Url.Action("UpdateDiscount", "Admin")', }); jQuery("#jQGridpending").jqGrid('navGrid', '#jQGridpendingPager', { search: true,recreateFilter: true, add: false, searchtext: "Search", edittext: "Edit", deltext: "Delete", }, {//EDIT url: '@Url.Action("UpdateDiscount", "Admin")', width: "auto", jqModal: true, closeOnEscape: true, closeAfterEdit: true, reloadAfterSubmit: true, afterSubmit: function () { // Reload grid records after edit a entry in the db. $(this).jqGrid('setGridParam', { datatype: 'json' }); return [true, '', false]; }, }, {//DELETE url: '@Url.Action("DelDiscount", "Admin")', closeOnEscape: true }, {//SEARCH closeOnEscape: true, searchOnEnter: true, multipleSearch: true, //overlay: 0, width: "auto", height: "auto", });

    Read the article

  • Header Div Position Edit according to Content Div

    - by Melih Mucuk
    I want to design my web site. I have two main div, one of them "header", other "content". I want to set width property:80% and I set center for both of them. But I don't do that. Other question about header div. I uploaded an image and I want to design like this. How can I do all of them? My CSS: #main { margin:0px auto; margin-left:50px; margin-right:50px; margin-top:25px; margin-bottom:25px; height:auto; text-align:center;} #content { width:80%; height:auto; margin:0px auto; } #header { width:80%; height:100px; top:20px; } #header_left { float:left ; height: 100px; text-align: center; } #header_right { margin:0px auto; height:30px; text-align:center; margin-top:35px; } #header_social { float:right; height:30px; text-align:center; margin-top:35px;} My client code: <div id="main"> <div id="content"> <div id="header"> <div id="header_left"> <asp:Image ID="Image1" runat="server" /> </div> <div id="header_right"> <asp:LinkButton ID="LinkButton5" runat="server" ForeColor="Gray"></asp:LinkButton>&nbsp;| <asp:LinkButton ID="LinkButton4" runat="server" ForeColor="Gray" ></asp:LinkButton>&nbsp;| <asp:LinkButton ID="LinkButton3" runat="server" ForeColor="#FF3300" ></asp:LinkButton>&nbsp;| <asp:LinkButton ID="LinkButton2" runat="server" ForeColor="Gray" ></asp:LinkButton>&nbsp;| <asp:LinkButton ID="LinkButton1" runat="server" ForeColor="Gray" ></asp:LinkButton> </div> <div id="header_social"> <asp:ImageButton ID="ImageButton1" runat="server"/> <asp:ImageButton ID="ImageButton2" runat="server"/> </div> </div> ******CONTENT FIELD***** </div> </div>

    Read the article

< Previous Page | 101 102 103 104 105 106 107 108 109 110 111 112  | Next Page >