Search Results

Search found 5262 results on 211 pages for 'commands'.

Page 105/211 | < Previous Page | 101 102 103 104 105 106 107 108 109 110 111 112  | Next Page >

• External routing for local interfaces in a virtualized network

  - by Arkaitz Jimenez

  Current setup: br0| |-- tun10 -pipe-tun0(192.240.240.1) |-- tun11 -pipe-tun1(192.240.240.2) |-- tun12 -pipe-tun2(192.240.240.3) The pipe program is a custom program that forwards data back2back between two tun interfaces. The idea is puting 2 programs in .2 and .3 while keeping .1 as the local interface in the current machine. The main problem is that I want to route packets to .2 and to .3 through .1 and br0, but as they are local interfaces, the kernel ignores any routing instruction, it just delivers the packet to the proper interface. Tried iptables, but the nat table doesn't even see ping packets to those ifaces. A "ping 192.240.240.2" delivers a icmp packet with source and dest .2 to tun1, ideally it should deliver a source .1 dest .2 at tun1 through tun0-br0-tun1 Any hint? Here the output of some commands: Output

  Read the article

• monitoring TCP/IP performance on Solaris

  - by Andy Faibishenko

  I am trying to tune a high message traffic system running on Solaris. The architecture is a large number (600) of clients which connect via TCP to a big Solaris server and then send/receive relatively small messages (.5 to 1K payload) at high rates. The goal is to minimize the latency of each message processed. I suspect that the TCP stack of the server is getting overwhelmed by all the traffic. What are some commands/metrics that I can use to confirm this, and in case this is true, what is the best way to alleviate this bottleneck?

  Read the article

• Duplicate pseudo terminals in linux

  - by bobtheowl2

  On a redhat box [ Red Hat Enterprise Linux AS release 4 (Nahant Update 3) ] Frequently we notice two people being assigned to the same pseudo terminal. For example: $who am i user1 pts/4 Dec 29 08:38 (localhost:13.0) user2 pts/4 Dec 29 09:43 (199.xxx.xxx.xxx) $who -m user1 pts/4 Dec 29 08:38 (localhost:13.0) user2 pts/4 Dec 29 09:43 (199.xxx.xxx.xxx) $whoami user2 This causes problems in a script because "who am i" returns two rows. I know there are differences between the two commands, and obviously we can change the script to fix the problem. But it still bothers me that two users are being returned with the same terminal. We suspect it may be related to dead sessions. Can anyone explain why two (non-unique) pts number are being assigned and/or how that can be prevented in the future?

  Read the article

• Mouse settings/properties dialog box won't open in Windows 7

  - by ymasood

  Hi, I have a problem trying to open my computer's mouse settings by either going to the command prompt and typing, 'control mouse', 'main.cpl' (as researched online) or simply by trying to go to the Control Panel and clicking on 'Mouse' under Hardware and Sound section. I have also tried running cmd as Administrator and trying the above commands but that is of no help. Lastly, if I search for 'mouse' and click 'Mouse' from the Windows search bar, that doesn't work either. In the past I had bought and installed Microsoft Wireless Mobile Mouse 6000 software and have just now bought and installed HP's Wireless Comfort Mobile mouse. Any help in this regard is highly recommended. I won't be able to restore or reinstall my laptop since it's a heavy use machine. Thanks! Yasser

  Read the article

• X11 Forwarding works on Windows with Xming and Putty, but not with ssh command line

  - by seaders

  I have a micro Amazon instance the I want to use for testing and everything is going fine until the title. If I set up all the info in PuTTy, open it up and run 'xclock', all runs perfectly and it opens on Xming on my local desktop. If, however, I run ssh xxxxxxx.amazonaws.com xclock I get Error: Can't open display: If I run either of ssh xxxxxxx.amazonaws.com -X DISPLAY=localhost:0:0 xclock ssh xxxxxxx.amazonaws.com -Y DISPLAY=localhost:0:0 xclock I get the same again, but just after about a 30 second delay. In .ssh/config in Windows, I do have ForwardX11 yes set, and I really can't think of anything more to get this working. The fact that PuTTy is working perfectly, not no matter what I do on the command line, I get absolutely no joy is driving me crazy. Can I even see the commands PuTTy is running somewhere, to see if it's doing some extra magic? The ssh I'm running in Windows is MinGW32's.

  Read the article

• Finding throuput of CPU and Hardrive on Solaris

  - by Jim

  How do i find the throughput of a CPU and the Hardisk on an open solaris machine. Using MPstat or iostat. I'm having a hard time identifying the throughput if it is given at all in the commands output. Eg. in mpstat there is very little explanation as to what the columns mean http://docs.sun.com/app/docs/doc/816-5166/mpstat-1m?l=en&a=view&q=syscl+mpstat I've been using the syscl column divided by time interval to find the throughput but to be honest i have no idea what a system call truelly is. I'm trying to to analyze a hardrive and CPU while writing a file to the hardisk and when at rest Thanks in advance. Jim

  Read the article

• Have suggestions for these assembly mnemonics?

  - by Noctis Skytower

  Greetings! Last semester in college, my teacher in the Computer Languages class taught us the esoteric language named Whitespace. In the interest of learning the language better with a very busy schedule (midterms), I wrote an interpreter and assembler in Python. An assembly language was designed to facilitate writing programs easily, and a sample program was written with the given assembly mnemonics. Now that it is summer, a new project has begun with the objective being to rewrite the interpreter and assembler for Whitespace 0.3, with further developments coming afterwards. Since there is so much extra time than before to work on its design, you are presented here with an outline that provides a revised set of mnemonics for the assembly language. This post is marked as a wiki for their discussion. Have you ever had any experience with assembly languages in the past? Were there some instructions that you thought should have been renamed to something different? Did you find yourself thinking outside the box and with a different paradigm than in which the mnemonics were named? If you can answer yes to any of those questions, you are most welcome here. Subjective answers are appreciated! Stack Manipulation (IMP: [Space]) Stack manipulation is one of the more common operations, hence the shortness of the IMP [Space]. There are four stack instructions. hold N Push the number onto the stack copy Duplicate the top item on the stack copy N Copy the nth item on the stack (given by the argument) onto the top of the stack swap Swap the top two items on the stack drop Discard the top item on the stack drop N Slide n items off the stack, keeping the top item Arithmetic (IMP: [Tab][Space]) Arithmetic commands operate on the top two items on the stack, and replace them with the result of the operation. The first item pushed is considered to be left of the operator. add Addition sub Subtraction mul Multiplication div Integer Division mod Modulo Heap Access (IMP: [Tab][Tab]) Heap access commands look at the stack to find the address of items to be stored or retrieved. To store an item, push the address then the value and run the store command. To retrieve an item, push the address and run the retrieve command, which will place the value stored in the location at the top of the stack. save Store load Retrieve Flow Control (IMP: [LF]) Flow control operations are also common. Subroutines are marked by labels, as well as the targets of conditional and unconditional jumps, by which loops can be implemented. Programs must be ended by means of [LF][LF][LF] so that the interpreter can exit cleanly. L: Mark a location in the program call L Call a subroutine goto L Jump unconditionally to a label if=0 L Jump to a label if the top of the stack is zero if<0 L Jump to a label if the top of the stack is negative return End a subroutine and transfer control back to the caller halt End the program I/O (IMP: [Tab][LF]) Finally, we need to be able to interact with the user. There are IO instructions for reading and writing numbers and individual characters. With these, string manipulation routines can be written. The read instructions take the heap address in which to store the result from the top of the stack. print chr Output the character at the top of the stack print int Output the number at the top of the stack input chr Read a character and place it in the location given by the top of the stack input int Read a number and place it in the location given by the top of the stack Question: How would you redesign, rewrite, or rename the previous mnemonics and for what reasons?

  Read the article

• How to install MariaDB rpms in CentOS 6.4 using rpm (not yum cmd) + handling mysql-libs conflicts

  - by Pat C

  I need to script the install of MariaDB using the rpm command in CentOS 6.4. I can't use yum since it's going to be an offline install so there's no access to the repository. The only MySQL package installed is mysql-libs as various other packages in CentOS depend on it. When I did a test install of MariaDB with yum it correctly accounted for mysql-libs and uninstalled it at the end as MariaDB could handle the dependencies after it was installed: [root@new-host-6 ~]# yum install MariaDB-client MariaDB-common MariaDB-compat MariaDB-devel MariaDB-server MariaDB-shared Loaded plugins: downloadonly, fastestmirror, refresh-packagekit, security, verify Loading mirror speeds from cached hostfile * base: mirrors.kernel.org * extras: mirror.keystealth.org * updates: mirror.umd.edu Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package MariaDB-client.x86_64 0:5.5.32-1 will be installed ---> Package MariaDB-common.x86_64 0:5.5.32-1 will be installed ---> Package MariaDB-compat.x86_64 0:5.5.32-1 will be obsoleting ---> Package MariaDB-devel.x86_64 0:5.5.32-1 will be installed ---> Package MariaDB-server.x86_64 0:5.5.32-1 will be installed ---> Package MariaDB-shared.x86_64 0:5.5.32-1 will be obsoleting ---> Package mysql-libs.x86_64 0:5.1.66-2.el6_3 will be obsoleted --> Finished Dependency Resolution Dependencies Resolved ==================================================================================================================================================================== Package Arch Version Repository Size ==================================================================================================================================================================== Installing: MariaDB-client x86_64 5.5.32-1 mariadb 10 M MariaDB-common x86_64 5.5.32-1 mariadb 23 k MariaDB-compat x86_64 5.5.32-1 mariadb 2.7 M replacing mysql-libs.x86_64 5.1.66-2.el6_3 MariaDB-devel x86_64 5.5.32-1 mariadb 5.6 M MariaDB-server x86_64 5.5.32-1 mariadb 34 M MariaDB-shared x86_64 5.5.32-1 mariadb 1.1 M replacing mysql-libs.x86_64 5.1.66-2.el6_3 Transaction Summary ==================================================================================================================================================================== Install 6 Package(s) Total download size: 53 M Is this ok [y/N]: y Downloading Packages: (1/6): MariaDB-5.5.32-centos6-x86_64-client.rpm | 10 MB 00:06 (2/6): MariaDB-5.5.32-centos6-x86_64-common.rpm | 23 kB 00:00 (3/6): MariaDB-5.5.32-centos6-x86_64-compat.rpm | 2.7 MB 00:02 (4/6): MariaDB-5.5.32-centos6-x86_64-devel.rpm | 5.6 MB 00:06 (5/6): MariaDB-5.5.32-centos6-x86_64-server.rpm | 34 MB 00:23 (6/6): MariaDB-5.5.32-centos6-x86_64-shared.rpm | 1.1 MB 00:00 -------------------------------------------------------------------------------------------------------------------------------------------------------------------- Total 1.3 MB/s | 53 MB 00:40 warning: rpmts_HdrFromFdno: Header V4 DSA/SHA1 Signature, key ID 1bb943db: NOKEY Retrieving key from https://yum.mariadb.org/RPM-GPG-KEY-MariaDB Importing GPG key 0x1BB943DB: Userid: "Daniel Bartholomew (Monty Program signing key) <[email protected]>" From : https://yum.mariadb.org/RPM-GPG-KEY-MariaDB Is this ok [y/N]: y Running rpm_check_debug Running Transaction Test Transaction Test Succeeded Running Transaction Warning: RPMDB altered outside of yum. Installing : MariaDB-compat-5.5.32-1.x86_64 1/7 Installing : MariaDB-common-5.5.32-1.x86_64 2/7 Installing : MariaDB-server-5.5.32-1.x86_64 3/7 chown: cannot access `/var/lib/mysql': No such file or directory PLEASE REMEMBER TO SET A PASSWORD FOR THE MariaDB root USER ! To do so, start the server, then issue the following commands: '/usr/bin/mysqladmin' -u root password 'new-password' '/usr/bin/mysqladmin' -u root -h new-host-6 password 'new-password' Alternatively you can run: '/usr/bin/mysql_secure_installation' which will also give you the option of removing the test databases and anonymous user created by default. This is strongly recommended for production servers. See the MariaDB Knowledgebase at http://kb.askmonty.org or the MySQL manual for more instructions. Please report any problems with the '/usr/bin/mysqlbug' script! The latest information about MariaDB is available at http://mariadb.org/. You can find additional information about the MySQL part at: http://dev.mysql.com Support MariaDB development by buying support/new features from Monty Program Ab. You can contact us about this at [email protected]. Alternatively consider joining our community based development effort: http://kb.askmonty.org/en/contributing-to-the-mariadb-project/ Installing : MariaDB-devel-5.5.32-1.x86_64 4/7 Installing : MariaDB-client-5.5.32-1.x86_64 5/7 Installing : MariaDB-shared-5.5.32-1.x86_64 6/7 Erasing : mysql-libs-5.1.66-2.el6_3.x86_64 7/7 Verifying : MariaDB-common-5.5.32-1.x86_64 1/7 Verifying : MariaDB-server-5.5.32-1.x86_64 2/7 Verifying : MariaDB-devel-5.5.32-1.x86_64 3/7 Verifying : MariaDB-client-5.5.32-1.x86_64 4/7 Verifying : MariaDB-compat-5.5.32-1.x86_64 5/7 Verifying : MariaDB-shared-5.5.32-1.x86_64 6/7 Verifying : mysql-libs-5.1.66-2.el6_3.x86_64 7/7 Installed: MariaDB-client.x86_64 0:5.5.32-1 MariaDB-common.x86_64 0:5.5.32-1 MariaDB-compat.x86_64 0:5.5.32-1 MariaDB-devel.x86_64 0:5.5.32-1 MariaDB-server.x86_64 0:5.5.32-1 MariaDB-shared.x86_64 0:5.5.32-1 Replaced: mysql-libs.x86_64 0:5.1.66-2.el6_3 Complete! My question is, what is the equivalent way to install the MariaDB packages using the rpm command only as opposed to yum? If I do rpm -ivh MariaDB*.rpm, I will get a ton of messages like the following about conflicts with mysql-libs: file /etc/my.cnf from install of MariaDB-common-5.5.32-1.x86_64 conflicts with file from package mysql-libs-5.1.66-2.el6_3.x86_64 file /usr/share/mysql/charsets/Index.xml from install of MariaDB-common-5.5.32-1.x86_64 conflicts with file from package mysql-libs-5.1.66-2.el6_3.x86_64 I then used the --force option to install the MariaDB rpms and uninstalled mysql-lib, I didn't get any weird messages but I'm not sure that is the cleanest method to handle the conflicts and do the install. So can someone confirm that installing MariaDB with the following rpm commands would be the same as using yum to install the packages and handle mysql-libs conflicts/removal: rpm -ivh --force MariaDB*.rpm rpm -e mysql-libs Thanks for any input!

  Read the article

• Ethernet switch not working

  - by Froskoy

  I've just tried using two different ethernet switches on my network to replace an 8-port Netgear gigabit ethernet switch, which works fine, but doesn't have enough ports for what I need. Computers are connected to a TP-Link TD-8840T router via a switch. They use DHCP for IP address assignment. One switch is a TigerSwitch 6924M, which I'd expect to be difficult to set up, since it is second hand and has an advanced configuration menu, which I can't access without a serial port. However, the second switch that I tried is a new TP-Link TL-SF024, which doesn't appear to have any configuration options, so that can't be the problem. When I say "not working," I mean that although they display that they are connected to a network, they cannot access the internet. For example commands like "ping -c10 google.co.uk" come up with 100% packet loss. What could be causing the problem and how do I fix it?

  Read the article

• Cisco login on-failure using syslog doesn't show username on failure?

  - by Jim

  interesting issue I am running into. I am trying to get syslog rmeote logging working with a Cisco switch. i have it working and logging for both on-success and on-failure. However when it is a failed login attempt it does not show the user name that tried to log in in the logs? Here is what the log looks like after a failed login: %SEC_LOGIN-4-LOGIN_FAILED: Login failed [user: ] [Source: 10.0. 0.6] [localport: 23] [Reason: Login Authentication Failed] Here is what I ahve in the sh run: login block-for 60 attempts 3 within 60 login delay 1 login on-failure log login on-success log archive log config logging enable notify syslog contenttype plaintext logging trap notifications logging facility local4 logging 10.0.0.8 aaa new-model aaa authentication login default local group tacacs+ aaa authorization config-commands aaa authorization exec default local group tacacs+

  Read the article

• nagios-nrpe-unable-to-read-output [closed]

  - by Bill S

  Oracle Linux; Icinga; Nagios plugins I did all the easy steps command runs fine standalone through my normal login; looked at /var/log/messages to see if any clues there Trying to run plugin under nrpe login - cant login don't know password; does this password matter? can I reset it? clone id? Any way to have shell being executed log all commands and output to somewhere? Trying to run this shell script plugin "nqcmd OBIEE plugin for Nagios" from this URL: http://www.rittmanmead.com/2012/09/advanced-monitoring-of-obiee-with-nagios/ I went through script and made sure that everything obvious was set to 755 Any help would be appreciated

  Read the article

• Simple web-frontend for remote svn administration?

  - by Stefan Lasiewski

  We run a SVN repository. Some of our more advanced users need to be able to perform some SVN administration without relying on the system administrator. They need to be able to do things like create SVN repositories, delete SVN repositories,, and perform commands like 'svnadmin dump' and 'svnadmin load'. We'd like to avoid SSH access on these FreeBSD machines, and would rather provide a service interface through a Web UI. I'm looking for a simple script (or a small number of scripts) which use Perl or PHP. I found svnadmin or svnadmin.pl, but was hoping to find something with a larger user community or which has been recommended by others. It looks like Trac allows SVN administration, but comes with may more features then we need.

  Read the article

• How to FTP via CLI? [closed]

  - by Ryan

  So I have a Debian machine and I want to transfer data on here to a Windows based FTP account. I've managed to open up firewalling for outbound FTP on the Debian source, but have never used FTP via CLI before. Does anyone know how I can go about transferring data? I am starting to get really confused with what to transfer from where. If I ssh to the Debian machine and then connect to the Windows FTP account, then try put and get commands, it never seems to recognise the path of the source files on the Debian machine.

  Read the article

• Are their any suggestions for this new assembly language?

  - by Noctis Skytower

  Greetings! Last semester in college, my teacher in the Computer Languages class taught us the esoteric language named Whitespace. In the interest of learning the language better with a very busy schedule (midterms), I wrote an interpreter and assembler in Python. An assembly language was designed to facilitate writing programs easily, and a sample program was written with the given assembly mnemonics. Now that it is summer, a new project has begun with the objective being to rewrite the interpreter and assembler for Whitespace 0.3, with further developments coming afterwards. Since there is so much extra time than before to work on its design, you are presented here with an outline that provides a revised set of mnemonics for the assembly language. This post is marked as a wiki for their discussion. Have you ever had any experience with assembly languages in the past? Were there some instructions that you thought should have been renamed to something different? Did you find yourself thinking outside the box and with a different paradigm than in which the mnemonics were named? If you can answer yes to any of those questions, you are most welcome here. Subjective answers are appreciated! Stack Manipulation (IMP: [Space]) Stack manipulation is one of the more common operations, hence the shortness of the IMP [Space]. There are four stack instructions. hold N Push the number onto the stack copy Duplicate the top item on the stack copy N Copy the nth item on the stack (given by the argument) onto the top of the stack swap Swap the top two items on the stack drop Discard the top item on the stack drop N Slide n items off the stack, keeping the top item Arithmetic (IMP: [Tab][Space]) Arithmetic commands operate on the top two items on the stack, and replace them with the result of the operation. The first item pushed is considered to be left of the operator. add Addition sub Subtraction mul Multiplication div Integer Division mod Modulo Heap Access (IMP: [Tab][Tab]) Heap access commands look at the stack to find the address of items to be stored or retrieved. To store an item, push the address then the value and run the store command. To retrieve an item, push the address and run the retrieve command, which will place the value stored in the location at the top of the stack. save Store load Retrieve Flow Control (IMP: [LF]) Flow control operations are also common. Subroutines are marked by labels, as well as the targets of conditional and unconditional jumps, by which loops can be implemented. Programs must be ended by means of [LF][LF][LF] so that the interpreter can exit cleanly. L: Mark a location in the program call L Call a subroutine goto L Jump unconditionally to a label if=0 L Jump to a label if the top of the stack is zero if<0 L Jump to a label if the top of the stack is negative return End a subroutine and transfer control back to the caller exit End the program I/O (IMP: [Tab][LF]) Finally, we need to be able to interact with the user. There are IO instructions for reading and writing numbers and individual characters. With these, string manipulation routines can be written. The read instructions take the heap address in which to store the result from the top of the stack. print chr Output the character at the top of the stack print int Output the number at the top of the stack input chr Read a character and place it in the location given by the top of the stack input int Read a number and place it in the location given by the top of the stack Question: How would you redesign, rewrite, or rename the previous mnemonics and for what reasons?

  Read the article

• How can I allow a linux subversion user to only execute svnserve?

  - by sbleon

  I've got a user that I'd like to only be able to use subversion. We like to use svn+ssh:// URLs sometimes (for public keys and whatnot), so I need them to be able to connect over ssh and run only the svnserve command. When using a svn+ssh URL, svn ssh'es in and passes the arguments "-c svnserve -t". I wrote a custom shell as follows to filter the commands that can be run. This works, but it's not passing the input to svnserve, so when I try to "svn up" I get "svn: Connection closed unexpectedly". #!/bin/bash if [ "$1" == "-c" ] && [ "$2" == "svnserve" ] && [ "$3" == "-t" ] && [ "$4" == ""] ; then exec svnserve -t else echo "Access denied. User may only run svnserve." fi

  Read the article

• how to disable isight auto adjustments ?

  - by George Profenza

  The built-in isight cam on my macbook machine keeps re-adjusting the lighting (and focus I think). I need to manually set those, but I found nothing of any use in System Preferences or System Profiler. Any way to access the settings ? Any magic terminal commands that allows access to the camera ? Anyone has a driver that allows for any camera access ? 'mac - it just works'...sure, if you want to use it like a kid. the second you actually want to do something with you mac other than the basic things, you can do on ANY regular machine anyway, your 'rights' are done with, as apple seems to only encourage dumb clients. I'm not saying saying this applies to all mac users, but the 'typical/average' one in my view is only going to use it for media(music,video) and web(facebook,blogging, all that) and maybe podcasting,webcasting,etc....ok this is turning into a rant, so I will finish here.

  Read the article

• Virtualmin deactivating PHP on new virtual servers

  - by Josh

  This is related to my other question... but the situation is much worse now. After updating to the most recent version of Virtualmin, when I create new accounts, Virtualmin sets up their VirtualHost entries as follows: <Directory /home/username/public_html> Options -Indexes +IncludesNOEXEC +FollowSymLinks +ExecCGI allow from all AllowOverride All AddHandler fcgid-script .php FCGIWrapper /home/username/fcgi-bin/php.fcgi .php </Directory> <Directory /home/username/cgi-bin> allow from all </Directory> [...] RemoveHandler .php Now, not only is it specifically inserting AddHandler fcgid-script and FCGIWrapper... which I do not want because I am using mod_fastcgi, but it's also setting up PHP in such a way that it will never work! It's adding a RemoveHandler .php after setting up the handler for PHP! Where is this behavior configured and how can I stop it? Better yet, how can I make Virtualmin not include any PHP commands at all in the VirtualHost section?

  Read the article

• How to make BASH try and autocomplete on Enter

  - by swatso33

  I've noticed that for many of the commands I use in bash I have actually learned how many letters of the command I must type before I can press [TAB] to have bash successfully autocomplete the command. For example when opening chromium I dont usually type the whole command but instead type $ chrom[TAB][ENTER] and bash successfully autocompletes the command to chromium before I hit the [ENTER] key. Is there a way to make autocomplete work without having to hit [TAB]? My general thinking is that if I type $ chrom[ENTER] bash could check and see that chrom isnt a valid command, but it would make sense to autocomplete it to chromium since that is the only command that starts with chrom

  Read the article

• search solution to integrate community mailing-lists into a website on shared hosting

  - by Thomas Traub

  The community (300 members), cocktailnetwork, has a website, cocktailnetwork.eu and about ten mailing lists. We want to manage the mailing lists from inside the website (lists and subscribers) and link the list's informations with the member profiles on the site. We are on shared hosting. The community members use the lists to send mails to all other members / groups of members. They can subscribe / unsubscribe from a list. The administrators can in addition create / delete / modify lists. Right now I use ezmlm with QmailAdmin, the lists are completly seperated from the website. I could link the data via remote administration commands, but that's not very satisfactory, does not allow the creation of new lists and it's an deprecated feature of our hosting package, sooner or later we'll need to switch anyway. Do You know of an elegant solution for us ? Any web service with a good, stable API ? Thanks.

  Read the article

• Prevent EC2 machine from halt, poweroff, shutdown

  - by Adam Matan

  Hi, EC2 Ubuntu servers erase all disk contents when being shut down. Following an unfortunate accident, I have decided to prevent the command-live halt, poweroff and shutdown. What's the best way to do it? I thought about renaming these commands (at /sbin) to something like HALT_RENAMED___ERASES_ALL_DISK_CONTENTS. Are there any files, other than the three listed above, that needs to be handled? I've noticed that halt and poweroff are merely links to reboot. Should reboot be renamed, too? Adam

  Read the article

• Bind "media" keys on MacBook keyboard to application menu items

  - by Austin

  Currently, I am using PandoraBoy to listen to my Pandora stations. In the preferences, it allows you to set global hotkeys to control playing, like/dislike, volume, stations, etc. What I would like to do is allow the built-in media keys on my MacBook Pro's keyboard (F7-F12: Previous, Play/Pause, Next, Mute, Volume Up, Volume Down) to control PandoraBoy like they do iTunes. Right now, I am using Command-F(7-12) to control it, but that requires me to hold down the "fn" and command keys Is there a way to bind these commands to the media keys without needing to function-shift them?

  Read the article

• Openstack keystone issue

  - by kevin

  i am having an issue with keystone,keystone is configured with users nova,glance and admin user and their endpoints are also defined. when performing keystone token-get it is showing token,but for commands like keystone user-list its showing No handlers could be found for logger "keystoneclient.client" Unable to communicate with identity service: 404 Not Found The resource could not be found. . (HTTP 404) but after setting these env variables it worked export SERVICE_ENDPOINT=http://192.168.10.15:35357/v2.0 export SERVICE_TOKEN=token but after that for keystone token-get its showing 'Client' object has no attribute 'service_catalog' Why is it so?How can it be fixed any ideas

  Read the article

• How can I shrink the Address toolbar in the Task Bar?

  - by Iszi

  I like being able to run commands straight from my Task Bar. So, I've enabled the Address toolbar on my new Windows 7 system - just like I had on my old XP system. However, the bar seems to have a mandatory minimum length that's a bit longer than I'd prefer. It's about twice as long, if memory serves, as the minimum size allowed in XP. Is there any way I can adjust this minimum length, through a Registry key or some other means? (Note: I've also got a related question, about removing the Refresh button at the end of the bar.) EDIT: For clarity, I'm adding a screenshot. The toolbar I want to shorten is the one circled below, with an empty text-entry field that has a drop-down and "Refresh" button. I currently have it positioned between a Quick Launch toolbar and the Taskbar. On the far side of the Taskbar, before the System Tray, is a Desktop toolbar.

  Read the article

• Very Large number of connections in TIME_WAIT state; Server is slow, ipconntrac

  - by Sparsh Gupta

  I have a nginx server with load balancing and reverse proxy. Right now its behing another nginx but very soon I plan to make it front, where it will receive TCP connections from clients directly at a rate of 500req/second I am having some big troubles with the server. I have pasted my configurations here and I am kinda sure that the problem is with ipconntrac and similar things which are alient to me http://paste.org/pastebin/view/28543 root@load_balancer:/proc/sys/net/ipv4# netstat -an|awk '/tcp/ {print $6}'|sort|uniq -c 67 CLOSING 727 ESTABLISHED 173 FIN_WAIT1 183 FIN_WAIT2 19 LAST_ACK 5 LISTEN 447 SYN_RECV 1 SYN_SENT 27970 TIME_WAIT Its a ubuntu machine with mainly nginx (load balancer and reverse proxy) installed. It surely isnt great. Can you help me understand whats going on and how can I fix it. This is my live server and I am sure its in a bad shape right now. Any document or commands to fix this, or settings I should make to make this better and reduce time wait and fin_wait1/2 better would be awesome.

  Read the article

• new vhost - main host AWstats

  - by vn

  Hi, I just began working at this new job and I have to config a new host for stats with awstats. I once used awstats on my own server, no biggie. Now, I'm on a multi-sites server with the acces_log files nicely splitted. I copied a awstats.conf file from one of the sites that already has (working) stats. I changed the LogFile and SiteDomain values as mentioned from http://awstats.sourceforge.net/docs/awstats_setup.html#BUILD_UPDATE, saved the conf and ran the commands perl awstats.pl -config=mysite -update and perl awstats.pl -config=mysite -output -staticlinks awstats.mysite.html (yes I changed it with my infos...) PROBLEM IS : whenever I try to access the html file or the dynamic page (with the config option on awstats.pl like my working site does), I get the stats of the MAIN site from access.log itself (and not access_log-mysite) from what it says at the top of the page and from the hostname on the left tab (stats for mysite.com)... what did I do wrong? There's no errors from what I see... Thanks a lot for any help

  Read the article

< Previous Page | 101 102 103 104 105 106 107 108 109 110 111 112  | Next Page >