Search Results

Search found 16442 results on 658 pages for 'computer forensics'.

Page 105/658 | < Previous Page | 101 102 103 104 105 106 107 108 109 110 111 112  | Next Page >

• Impossible quandrary involving UCK, graphics card, and Nvidia drivers

  - by InkBlend

  I have a computer that I want to install Ubuntu on. It is an older gaming computer with a Nvidia graphics card. When I attempt to boot any unmodified Linux distribution onto it, I get a "Boot error" message, which I assume is because the computer uses a discrete graphics card, which the Linux kernel does not have support for. Ordinarily, that would not be a problem, as I would just plug the monitor into the VGA port built in to the motherboard. However, this particular model of motherboard does not have an on-board graphics connector, so I am stuck with using the graphics card connection. That further would not be a problem; all I would have to do would be to use UCK to create a customized Ubuntu image that included the graphics drivers. Except for the fact that the Nvidia Linux drivers must be installed on a computer with a Nvidia graphics card present. So while using UCK, the driver installer fails with a message stating that there is no Nvidia graphics card present. How do I get Ubuntu on my desktop computer?

  Read the article

• Why has my computer started to make noises when I turn it on after I put it into sleep mode for the first time a week ago?

  - by Acid2

  I would usually have my pc on all day and fully shut it down at night time before I went to bed. I decided to put it into sleep mode instead the other day and everything was fine but when I woke it from sleep, I was presented with the blue screen of death and it started with some weird noise that sounded like some spinning part was off balance or possibly hitting something periodically. Sounds like it could be a fan or maybe the HDD. I'm not sure why sleep mode would mess up the hardware. Anyway, now sometimes, randomly, when I turn my computer on from a previous shut down, I still get to hear the noise but the start-up is normal. Sometimes I don't hear anything for the entire duration while I have it on and sometimes it goes away after a few minutes and sometimes it doesn't and I have to restart, like it isn't going away right now. I can hear the noise as I type this. Anyone got possible solutions? I don't want to open the system and mess up other stuff. I'm also not sure if I should take it somewhere to have it fixed - it might not make the noise then and work like normal and nothing would seem like needing to be fixed. Add: I'm running Windows 7, if that's of any relevance.

  Read the article

• Looking for a way to give acces to some programs for a limited period of time

  - by R. L.

  I install Linux on computers and add to the base installation some other programs. This computer then is sold to a customer as a larger instrument. Now, I am looking for a way to implement some kind licence for this computer so the user can use it for a year and then he would need to "renew" the licence. It is not my intention to lock the whole computer , blocking or deleting some folders should be enough. The only way I could think of was to setup a cron job that deletes my programs, or a second way would be to set the user account to expire after a year. But I give the computer with sudo privilages so the above solutions wouldn't be 100% safe. It is not my intention to encrypt any code, I just want block the possibility to execute certain programs. Is there a way or a program that would "licence the computer" ? Ideally it should be invisible to the user. After one year the program stops working and "he doesn't know why."

  Read the article

• How to configure what certificates can be issued using Web Enrollment in Windows Server 2008 R2 Enterprise?

  - by antik

  I have a CA installed on of my Windows Servers in a small farm of systems. I've installed the Certification Authority Web Enrollment and Certificate Enrollment Web Service roles on the CA. I want to issue a Computer certificate to a computer not jointed to my domain. The user attempting web enrollment has domain credentials. The user was able to navigate to https://myServerHostname/certsrv and request a User certificate successfully. However, the user needs a Computer cert as well. From the certsrv site, the user tried the following: Advanced Certificate Request Create and Submit a Request to this CA However, the Computer certificate template is not available under the Certificate Template heading. He is only seeing "User" and "Basic EFS". How do I configure the CA to allow him to request a Computer cert for his system?

  Read the article

• Upgrade two computers on the same WIFI network from 12.04 to 12.10

  - by deshmukh

  I have two computers on the same WIFI network at home. Both run on Ubuntu 12.04 and both will need to update to 12.10 shortly. There are some applications that are installed on one but not on the other and vice versa. But they share a large many applications. Please indicate how can I upgrade both in such a way that: I download all the packages required on Computer 1 Move the downloaded packages to the other computer using external HD (that is much quicker than over WIFI) Then upgrade Computer 1 Then upgrade Computer 2 -- after it downloads any packages that are not already available. Also, I am a newbie and would be grateful if the process is simple and properly explained.

  Read the article

• CUDA, Supercomputing for the Masses: Part 16

  CUDA 3.0 provides expanded capabilities Supercomputer - Supercomputing - High-performance computing - Computer Science - Research Institutes

  Read the article

• WMV will play audio but not show images (dark screen)

  - by GUI Junkie

  This happens on one computer. On the other computer I can see the video. I've installed GStreamer, FFMpeg and Ubuntu Restricted Extras. On the computer where it doesn't work, I've tried both Movie Player and VLC. There must be some difference between the two computers, but how can I obtain all the system information in such a way that a diff could be reasonably done? Or just any other suggestion on how to solve this would be appreciated. :-)

  Read the article

• can not wakeup suspend com[puter

  - by user3528144

  I am unable to wake up my suspend Ubuntu 13.10. I click on suspend accidentally and HD led continues flash, but I tried to press any key keyboard, and CTL-ALT-PS R-E-I-S-U-B and power button, but can not wake up computer. I had to unplug power and put power back on to reboot computer. I would like to know are there any way to wake up suspend computer? Your help and information is great appreciated, regards, Iccsi,

  Read the article

• Google Chrome wont start after changing hostname

  - by user254473

  I tried to start google chrome in terminal several times, and I keep receiving the following message: ... :ERROR:process_singleton_linux.cc(309)] The profile appears to be in use by another Google Chrome process (8629) on another computer ("previous name of the computer"). Chrome has locked the profile so that it doesn't get corrupted. If you are sure no other processes are using this profile, you can unlock the profile and relaunch Chrome. ... :ERROR:simple_message_box_views.cc(208)] Unable to show a dialog outside the UI thread message loop: Google Chrome - The profile appears to be in use by another Google Chrome process (8629) on another computer ("previous name of the computer"). Chrome has locked the profile so that it doesn't get corrupted. If you are sure no other processes are using this profile, you can unlock the profile and relaunch Chrome. Any suggestions? Thanks in advance.

  Read the article

• Fresh install of 12.04 Kernel panic

  - by user70260

  I am attempting to install Ubuntu 12.04 on my computer. After the Ubuntu splash screen, the computer throws up this error: sr 2:0:1:0: [sr0] Unhandled error code Kernel panic - not syncing: Attempted to kill init! PID: 1, comm: run-init Not Tainted 3.2.0-23-generic #36-Ubuntu The computer hardware is as follows: Core 2 quad 9400, 8gb RAM, GTX 275, 3 Mech HD, 2 SSD, Win 7 install. I would like to dual boot Ubuntu on this computer if possible. I did try placing this disk in my laptop and booted successfully which leads me to believe the fault lies with the desktop. Under windows all hardware seems to work ok. Any ideas?

  Read the article

• How do I bridge connections in Debian?

  - by Josh

  In windows I can select Local Area Connection and Wireless Network Connection, right click and select Bridge Connections How can I achieve the same effect in Linux? (Debian to be exact) Pretty much I want Computer B to connect to Computer A via ethernet cable. Well Computer A is connected wirelessly. Allowing Computer B to get on the internet. == UPDATE == I've enabled IP forwarding and used the following iptables command: iptables -t nat -A POSTROUTING -o wlan0 -j MASQUERADE I'm still unable to access the internet from Computer B though.

  Read the article

• Network connection via USB

  - by Fco

  Can I get my Nexus One/Android on my local network over USB instead of WiFi and browse to my computer's IP address, the one to which the phone would be connected to, via USB? For instance, let's say my computer has an IP address 100.1.1.1 and when I go to it from the computer I would go to my localhost and see a website I've set up locally in the computer. Then, I connect my phone to that computer via USB. Can I then go to 100.1.1.1 from the browser and see the same website? All this through the USB, no WiFi?

  Read the article

• ubuntu 14.04 slow

  - by TURN A

  so i upgraded to ubuntu 14.04 from 12.04 with a usb but i have internet ,my computer is really slow at 1024x768 definition ,everything works super slow ,windows closing and opening and streaming videos ,everything ive used so far.but it works fine at 800x600 definition ,i want it to be fine at the higher definition ,how do i make it run well at 1024x768 ? in additional drivers nothing shows ,and my computer mirrors by default for some reason ,i tried stopping it from mirroring but most buttons dont want to work and weird glitches happen ,the system doesnt work well when not mirroring , i dont care if it mirrors or not i just want good performance .thank you in advance for any answers !! here are the computer specs Processor 1.8 GHz 8032 RAM 2 GB DDR3 Memory Speed 1066 MHz Hard Drive 32 GB Graphics Coprocessor Graphics Media Accelerator HD Wireless Type 802.11B, 802.11G, 802.11n Number of USB 2.0 Ports 4 Expand Other Technical Details Brand Name Asus Item model number EB1030-B003L Hardware Platform Linux Operating System Ubuntu Item Weight 1.5 pounds Item Dimensions L x W x H 1.14 x 6.70 x 8.60 inches Color Black Processor Brand Intel Processor Count 1 Computer Memory Type DDR3 SDRAM Flash Memory Size 32 Hard Drive Interface Solid State Optical Drive Type No

  Read the article

• Keep IMAP messages locally when deleted remotely

  - by user74328

  I use my email from my phone and my computer via IMAP. I want to set something up so that if I delete a message via my phone, my computer will still keep the message locally. For example, assume I leave my computer on, with a synchronize interval of 5 minutes. I want to be able to send something from my phone, wait 5 minutes to be sure my computer has downloaded the item from the Sent folder, then delete it from the IMAP sent folder via my phone, but have the computer at home keep it's copy. Is this possible with any readily available email clients out there? I have Thunderbird and Outlook at the moment, but would be willing to learn a new interface for this feature. How can I accomplish this?

  Read the article

• No image from graphics card but image from onboard video

  - by ReAzem

  I have an HD 5970 running on a P8Z68-v LE motherboard and I have no image comming out of the graphic card. When I plug my screen on my motherboard, I see the bios and the OS. When I plug my screen on the graphic card, I don't see anything. I know that the graphic card works because I have tested it on another computer. I know the motherboard works because I tested it with another graphic card and it worked. I know that the graphic card works with the computer because I have another computer with a P8Z68-LE and an HD 5970. I know it is not an OS issue because I should atleast be able to see the bios. I have tried unplugging my HDDs so that the OS dont interfere with anything. Using a 1000W power supply Using another HD5970 on the computer works. So this is a problem with my HD5970, but why is the graphic card working on my other computer?

  Read the article

• Microsoft to Take Down Global "Botnet"

  Microsoft won the right in a U.S. court to deactivate an international computer network that the software claims harmful computer codes.

  Read the article

• Microsoft to Take Down Global "Botnet"

  Microsoft won the right in a U.S. court to deactivate an international computer network that the software claims harmful computer codes.

  Read the article

• ASUS WL-500gP v2 network between two local machines

  - by Epsiloncool

  I have two windows XP machines in my home networks, connected with ASUS WL-500gp V2 which also used as internet router. Problem is: while I have both computers normally goes to internet (used DHCP, static routes is ON, routing table is empty, operation mode is Home Gateway). I see both computers listed on the Network Neighborhood on 1st computer (wired to router), can enter to my own computer, but can not enter to other. I see only one computer (2nd) on the Network Neighborhood on 2nd computer (connected thru Wi-Fi), can enter to itself, getting error when trying to enter 1st computer address in address line (like \My1stComp). What is the problem? I totally crazy founding problem about 3 months.

  Read the article

• Ubuntu Won't Install On Custom Build

  - by Dallas

  just built my first computer, trying to install Ubuntu, when I tell my BIOS to startup from disk drive it says "Please insert boot media into boot device" so I insert my burned disc and my computer thinks for a few seconds and then prompts me again. Any idea why? Tried multiple times, burned two discs, I have even confirmed that my build works by swapping hard drives with the computer I'm currently using to post this, so I'm kinda out of answers right now and hoping you guys can help me find something I've done wrong, thanks in advance for any help.

  Read the article

• How do I turn a Wi-Fi "hotspot" into a local wired network?

  - by Max Schmeling

  Here's the situation: In a remote "office" I have a computer with no network connection, that I need to network with when I'm at this remote office. There is a wireless network where this computer is, but no wireless adapter in the computer. I have a laptop running Windows 7 that can connect to the wireless, and the computer is running Windows Vista. What is the best way to get them both connected? I know I can buy a USB wireless adapter or something for the computer, but is there an easy way to do it with what I've got?

  Read the article

• What's the lightest Ubuntu desktop environment? [duplicate]

  - by user242125

  This question already has an answer here: How do I find out which version and derivative of Ubuntu is right for my hardware in terms of minimal system requirements? 5 answers My computer has 1GB ram and a very low graphic card, but I don't know how much powerful it is. My computer is very slow with Ubuntu Unity and I saw that there are many desktop environments which are much faster, even for a slow computer. So, what's the lightest desktop environment.

  Read the article

• How to get MMF2 or similar program

  - by Feldpausch All4

  I took a Game Design class a while ago that used Multimedia Fusion 2. Now I would like to get it on my computer, but I don't have the disk anymore. I have access to the program on my Dad's computer, but I want to get it on mine. Is there a way to get MMF2 for free on my computer? If not, are there any other free game design programs like MMF2 (knowing code is not necessary)? Edit: If I paid the $50 to upgrade to 2.5, could I put it on a second computer, or is that not possible?

  Read the article

• Game Database Connectivity Java

  - by The Kraken

  I'm developing a simple multi-player puzzle game in Java. Both players should be able to view the same game board on his own computer. Then, when one player makes an action in the game (ex. drags an object onto a coordinate space), the game's view should update automatically on the other computer's game screen. I'd like all this to happen over the internet, not requiring both computers to be on the same LAN connection. If I need to use SQL/PHP to accomplish this, I'm unsure how to design the database to accomplish something as simple as the following: Player A drags element onscreen Game sends coordinates of element to database/server Player B's computer detects a change to an item in the database Player B's computer grabs the coordinates of Player A's item Player B's machine draws onscreen elements at the received coordinates Could somebody point me in the right direction?

  Read the article

• Is it legal to install WIndows 7 Professional (OEM) on VMWare? [closed]

  - by Domina

  Possible Duplicate: Can you help me with my software licensing issue? I recently heard that Microsoft allow you to install OEM version of windows 7 into Virtual Machine. I'm not 100% sure whether it is true or not and would like to re-confirm with you guys. FYI, I have 2 computers. Let's say "computer A" and "Computer B". I bought a copy of WIndows 7 Professional OEM edition recently and already installed it on my Computer A. I've two questions: Is it legal to install it again on a VMWare/Virtual PC on my Computer A? Is it legal to install it on VMWare/Virtual PC on my Computer B? Thanks.

  Read the article

• mysql backup and restore from ib_logfile failure

  - by i need help

  Here's the case: After computer being hacked, we are in a rush to backup all data out to other computer. As a result, the mysql databases are not backup out as sql statement. What we have done is backup out all the physical files/folders in the C drive to new computer. Eg: C:\Program Files\MySQL\MySQL Server 4.1\data In this case, all data for mysql are inside unreadable file. Inside data folder consist of files like ib_logfile0, ib_logfile1, but not ib_data1 All database's table structure format are inside each respective folder. (Some folder have .frm, .opt) (some other folder have .frm, .myd, .myi) How can I retrieve back the data from the database in a new computer? I tried to install the same mysql version(4.1) at new computer, then replace all backup files inside data folder into this mysql in new computer. Then restart mysql service. When I restart, it fail: Could not start mysql service on local computer. error 1067: process terminated unexpectedly. Error log showing: InnoDB: The first specified data file .\ibdata1 did not exist: InnoDB: a new database to be created! 090930 10:24:49 InnoDB: Setting file .\ibdata1 size to 10 MB InnoDB: Database physically writes the file full: wait... InnoDB: Error: log file .\ib_logfile0 is of different size 0 87031808 bytes InnoDB: than specified in the .cnf file 0 25165824 bytes! 090930 10:24:49 [ERROR] Can't init databases 090930 10:24:49 [ERROR] Aborting 090930 10:24:49 [Note] C:\Program Files\MySQL\MySQL Server 4.1\bin\mysqld-nt: Shutdown complete

  Read the article

< Previous Page | 101 102 103 104 105 106 107 108 109 110 111 112  | Next Page >