Search Results

Search found 86473 results on 3459 pages for 'new guy'.

Page 105/3459 | < Previous Page | 101 102 103 104 105 106 107 108 109 110 111 112  | Next Page >

• New PC: win7 install issues with 2x3TB in RAID1

  - by goober

  Background / Components Not sure what I've done wrong. Built one PC before successfully in a similar way but this one seems to be struggling. I have the following components: ASUS P8Z68-V/Pro Gen 3 (updated to latest firmware) 16GB (2x8GB) RAM corsair hx850 power supply 2x3TB drives on the intel z68 controller 1x128GB SSD on the Marvel controller sapphire 7950 The problem I set up my 3 TB disks in RAID1 controller appears to recognize them fine during boot as one 2.7TB raid1 volume windows setup sees two disks, both 746 GB, but will only let me install to one and appears to work fine. windows appears to install fine after installer reboots, I receive "windows failed to start" error referencing code 0xc000000e and "\Windows\system32\winload.exe every time I do an install, a new additional "win7" entry is added to the boot menu; all lead to this error. What I've tried: updated the BIOS to the latest firmware attempted to repair the install tried clearing / removing raid / re-raiding drives tried formatting the drives during install attempted to clear the menu Of entries (can't figure out how to do that) No matter how many times I destroy the raid array, format the disks, etc. the boot entries keep piling up. Any idea where I'm going wrong?

  Read the article

• Fixed ruby/mysql connection with new libmysql.dll, and broke Apache in the process

  - by jmtoporek

  Ok so bit of background - all my development has been on a local Windows 7 machine. I had Apache with PHP/MySQL running with no issues. Been using ruby (1.9.3 and latest rails release 3.2.9) with built in webrick server, but had a devil of a time connecting to mysql. Did some research, updated my libmysql.dll file in c:/ruby/bin and it worked! Very happy... except now Apache stopped working. In my attempt to resolve the issue I found an older copy of libmysql.dll, renamed the new file, copied the old file back to c:ruby/bin and apache works, ruby does not. So I can take this ass backwards approach but obviously this seems pretty stupid. I was surprised that Apache was using the dll file in ruby/bin folder. I presume this is related to path variables perhaps? I guess I was hoping someone could direct me as to how I can use one dll file for apache and another for ruby. Or if you have some other smarter approach - I've smart enough to follow directions to install apache from scratch and enable php on windows as well as ubuntu, but I'm not much of a sys admin, just a semi competent web developer.

  Read the article

• Specify default group and permissions for new files in a certain directory

  - by mislav

  I have a certain directory in which there is a project shared by multiple users. These users use SSH to gain access to this directory and modify/create files. This project should only be writeable to a certain group of users: lets call it "mygroup". During an SSH session, all files/directories created by the current user should by default be owned by group "mygroup" and have group-writeable permissions. I can solve the permissions problem with umask: $ cd project $ umask 002 $ touch test.txt File "test.txt" is now group-writeable, but still belongs to my default group ("mislav", same as my username) and not to "mygroup". I can chgrp recursively to set the desired group, but I wanted to know is there a way to set some group implicitly like umask changes default permissions during a session. This specific directory is a shared git repo with a working copy and I want git checkout and git reset operations to set the correct mask and group for new files created in the working copy. The OS is Ubuntu Linux. Update: a colleague suggests I should look into getfacl/setfacl of POSIX ACL but the solution below combined with umask 002 in the current session is good enough for me and is much more simple.

  Read the article

• New router, slower internet connection?

  - by qwerty

  So, we just bought a new router a few hours ago, and it does work. However, for some reason the speed is just ridiculously slow (compared to before, at least)! If i run a test on speedtest.net i get the following results: http://i.imgur.com/68JyH.png which are pretty good. But for some reason it's like the connection just "hangs" for a second when i navigate to a site through the browser (have tried different browsers). It's not on all sites, it kind of happens randomly. I think the browser cache might be speeding some sites up, because if i visit a site that i HAVEN'T visited before (since i cleared my cache), it takes like two seconds (if not more) to open the site. If i have visited it, it opens directly (it barely loads). Not sure what to do, really. Any suggestions on what might speed it up? Any settings i can play with in the router settings? The router is of the brand Belkin. I'm not sure about the model though, it says "Belkin, Play Max Wireless Router" on the box? Thanks in advance! EDIT: Alright, it takes a lot more than two seconds. At least 3-4 depending on the site. Any suggestions?

  Read the article

• Unexpected media key behavior on new Acer Aspire

  - by Morgan May

  I'm having weird issues with the media keys (play/pause, previous, next, etc.) on a new Acer Aspire laptop. This is the first Acer I've owned and also my first Windows 7 computer, so I'm not sure whether the behavior is a result of some hidden Acer process that I haven't rooted out yet, or some Windows 7 option that I'm not aware of, or something else. I'm experiencing two issues that I suspect are related. Both problems are intermittent but happen more often than not. The media player I'm using is Winamp. I'm pretty sure I've had the same problem when using other media players, but when I tried to verify that before posting this, I only had the problems with Winamp. Because the problems are intermittent, I'm not sure if that's significant. 1) When I press the Play/Pause media key, in addition to playing or pausing the media player, it brings up a little menu in the center of the screen that lists my removable drives (CD/DVD, USB drives, etc.). To make the menu go away I have to either click away from it or hit Escape. Selecting a drive on the menu doesn't seem to do anything. 2) When I press the Previous or Next media keys, it skips 2+ tracks instead of just one (the exact number seems to vary). I've poked around all the control panel options that I can find, and looked through all the utilities that came with the computer with no luck. There's nothing that I can find in the (very slim) documentation, either. I have a hunch that the problem is caused by whatever utility manages global hotkeys, but I haven't found any way to configure that. Any guidance would be greatly appreciated. UPDATE: It looks like Winamp was the culprit. I did have the problem when using other media players, but when I uninstalled Winamp, the problem went away. I'd like to use Winamp, but I can survive with other players.

  Read the article

• Mod_pagespeed, Varnish and Apache cache issues after new code pushes

  - by WerkkreW

  I have a rather strange issue. In my environment we are running a load balanced cluster of 8 apache servers with a master-master MySQL backend. In front of apache we have Varnish in the cache layer. We have been running Apache mod_pagespeed for several weeks now and for the most part it has been working great. The issue arises when we do fresh code updates from Git, and and/all of the JS/CSS assets change. Basically the problem appears to be two fold. One, after the code push we generally take the opportunity to flush varnish, restart apache, and restart varnish. In doing this all of the mod_pagespeed combinied/minified files are cleared out ensuring that all of the new JS/CSS assets are fresh. The problem is, upon doing this the file names that mod_pagespeed creates change, but the old files (appear) to be still cached for many people client side leading to very unexpected results. However, if we do not restart apache, the changes to the files may or may not appear client side due to the cached minified assets. The simple solution is to disable mod_pagespeed, however I would rather not do that as it has made a fairly large impact in performance. I feel as if there must be a better way to deal with the inconsistencies in cache between the client and server to prevent having people to go to great lengths or perform a large number of page refreshes to see a working page. I can provide configuration snippets if anyone needs them. If you would like to inspect the site, source, headers, or anything try the following addresses: http://wellplayed.org http://wellplayed.org/tv Thanks in advance!

  Read the article

• Windows Server 2003 (w/Exchange) move to new machine

  - by James Booker

  I have an ageing domain controller (the only one on a 10-pc network) which needs rebooting often. I have a Dell Poweredge 2850 server doing nothing, so I'd like to move the DC to that, but here's the catch - I don't have Win2k Server Std install media any more as it's been lost. I purchased "Easus Todo Backup Advanced Server" which claims to be able to recover to dissimilar metal, but it's not quite working (although I don't think it's the product's fault) I know the server and PERC RAID card are good because I installed Ubuntu on the logical drive (4 x 72GB disks RAID 5) no problems. I've booted frmo the Easus Todo backup CD (which is WinPE based) and recovered to the logical disk on the RAID (after installing driver inside the WinPE environment from a NAS drive) The problem is when I boot the server, I can get the OS selection menu, but any option results in a blank screen, with no errors. I figure this is probably because the driver wasn't installed on the old machine (which is IDE-based (i know, i know!) and doesn;t have a RAID controller) I've booted from the CD and copied the mraid35x.sys file to the c:\windows\system32\drivers folder on the recovered system, but it makes no difference. I made a boot.ini with rdisks 0-10 defined, and booting from each of these resulted in a file error (i.e. 'this isn't a real disk') - the only disk that gets any response (the blank screen) is multi(0)disk(0)rdisk(0)partition(1) which just gives me the blank black screen and no disk activity. Is there any way I can force the drvier to be installed on the source system (so i can do a full backup again), i've tried right-clicking the oemsetup.inf and clicking install, but it didn't actually do anything. I attempted to force it with the 'Add new hardware' wizard and forcing with the 'have disk' option but it still gave me no hardware to select. Also I've got an identical machine running WinXP which uses the PERC driver successfully (which was obviously done at install time) and the boot.ini settings are the same : multi(0)disk(0)rdisk(0)partition(1) Any ideas would be appreciated.

  Read the article

• Video adapter problem on new motherboard

  - by Dmitriy Matveev

  Something bad happened to my PC several days ago. I wasn't near my PC, so I have no idea about what happened it was just halted. When I tried to boot it was entering infinite loops of a few seconds power up (cpu, hdds, etc) and then power down. I've tried to boot the system with no additional components (that includes hdd, video, network adapters and even memory) connected and that didn't solved the problem, so I've made a decision that most likely it's either some a problem with power unit or with motherboard. I've tried to replace my power unit by another one (which was expected to be working) and the problem didn't resolved again. I've bought a new MB (ASUS P5KPL-AM SE) and tried to get it running with my old CPU and memory (I hope it's still alive). Since this MB include on-board video I've tried to run the PC without installation of mine video. The PC wasn't running and the BIOS was beeping one long signal following by two short (Does it means a video problem?). After that I've installed my video adapter to PCI-E slot and tried to boot the system again and the BIOS was beeping the same. I don't get it. I may expect some problem with CPU and/or memory since I don't know what happened to my PC (maybe some power failure or something different), but not with video and not with on-board video on newly bought MB. How can I understand what's wrong with my system now?

  Read the article

• Stack overflow error after creating a instance using 'new'

  - by Justin

  EDIT - The code looks strange here, so I suggest viewing the files directly in the link given. While working on my engine, I came across a issue that I'm unable to resolve. Hoping to fix this without any heavy modification, the code is below. void Block::DoCollision(GameObject* obj){ obj->DoCollision(this); } That is where the stack overflow occurs. This application works perfectly fine until I create two instances of the class using the new keyword. If I only had 1 instance of the class, it worked fine. Block* a = new Block(0, 0, 0, 5); AddGameObject(a); a = new Block(30, 0, 0, 5); AddGameObject(a); Those parameters are just x,y,z and size. The code is checked before hand. Only a object with a matching Collisonflag and collision type will trigger the DoCollision(); function. ((*list1)->m_collisionFlag & (*list2)->m_type) Maybe my check is messed up though. I attached the files concerned here http://celestialcoding.com/index.php?topic=1465.msg9913;topicseen#new. You can download them without having to sign up. The main suspects, I also pasted the code for below. From GameManager.cpp void GameManager::Update(float dt){ GameList::iterator list1; for(list1=m_gameObjectList.begin(); list1 != m_gameObjectList.end(); ++list1){ GameObject* temp = *list1; // Update logic and positions if((*list1)->m_active){ (*list1)->Update(dt); // Clip((*list1)->m_position); // Modify for bounce affect } else continue; // Check for collisions if((*list1)->m_collisionFlag != GameObject::TYPE_NONE){ GameList::iterator list2; for(list2=m_gameObjectList.begin(); list2 != m_gameObjectList.end(); ++list2){ if(!(*list2)->m_active) continue; if(list1 == list2) continue; if( (*list2)->m_active && ((*list1)->m_collisionFlag & (*list2)->m_type) && (*list1)->IsColliding(*list2)){ (*list1)->DoCollision((*list2)); } } } if(list1==m_gameObjectList.end()) break; } GameList::iterator end    = m_gameObjectList.end(); GameList::iterator newEnd = remove_if(m_gameObjectList.begin(),m_gameObjectList.end(),RemoveNotActive); if(newEnd != end)        m_gameObjectList.erase(newEnd,end); } void GameManager::LoadAllFiles(){ LoadSkin(m_gameTextureList, "Models/Skybox/Images/Top.bmp", GetNextFreeID()); LoadSkin(m_gameTextureList, "Models/Skybox/Images/Right.bmp", GetNextFreeID()); LoadSkin(m_gameTextureList, "Models/Skybox/Images/Back.bmp", GetNextFreeID()); LoadSkin(m_gameTextureList, "Models/Skybox/Images/Left.bmp", GetNextFreeID()); LoadSkin(m_gameTextureList, "Models/Skybox/Images/Front.bmp", GetNextFreeID()); LoadSkin(m_gameTextureList, "Models/Skybox/Images/Bottom.bmp", GetNextFreeID()); LoadSkin(m_gameTextureList, "Terrain/Textures/Terrain1.bmp", GetNextFreeID()); LoadSkin(m_gameTextureList, "Terrain/Textures/Terrain2.bmp", GetNextFreeID()); LoadSkin(m_gameTextureList, "Terrain/Details/TerrainDetails.bmp", GetNextFreeID()); LoadSkin(m_gameTextureList, "Terrain/Textures/Water1.bmp", GetNextFreeID()); Block* a = new Block(0, 0, 0, 5); AddGameObject(a); a = new Block(30, 0, 0, 5); AddGameObject(a); Player* d = new Player(0, 100,0); AddGameObject(d); } void Block::Draw(){ glPushMatrix(); glTranslatef(m_position.x(), m_position.y(), m_position.z()); glRotatef(m_facingAngle, 0, 1, 0); glScalef(m_size, m_size, m_size); glBegin(GL_LINES); glColor3f(255, 255, 255); glVertex3f(m_boundingRect.left, m_boundingRect.top, m_position.z()); glVertex3f(m_boundingRect.right, m_boundingRect.top, m_position.z()); glVertex3f(m_boundingRect.left, m_boundingRect.bottom, m_position.z()); glVertex3f(m_boundingRect.right, m_boundingRect.bottom, m_position.z()); glVertex3f(m_boundingRect.left, m_boundingRect.top, m_position.z()); glVertex3f(m_boundingRect.left, m_boundingRect.bottom, m_position.z()); glVertex3f(m_boundingRect.right, m_boundingRect.top, m_position.z()); glVertex3f(m_boundingRect.right, m_boundingRect.bottom, m_position.z()); glEnd(); // DrawBox(m_position.x(), m_position.y(), m_position.z(), m_size, m_size, m_size, 8); glPopMatrix(); } void Block::DoCollision(GameObject* obj){ GameObject* t = this;   // I modified this to see for sure that it was causing the mistake. // obj->DoCollision(NULL); // Just revert it back to /* void Block::DoCollision(GameObject* obj){     obj->DoCollision(this);   }   */ }

  Read the article

• Upcoming EMEA, APAC & US Events with MySQL in 2014

  - by Lenka Kasparova

  As an update to the previous announcement from Mar 25, 2014 please find below the updated list of events where MySQL Community team is attending and/or supporting. This time you can find not only EMEA & APAC ones but also conferences & events we are covering in the US & Canada. You are invited to meet our engineers at the events below.   EMEA  NEW!! BGOUG, Sandanski, Bulgaria, June 13, 2014  Georgi Kodinov will attend and speak at this local Oracle User Group event. Feel free to come. PHP Tour Lyon, Lyon, France, June 23-24, 2014 MySQL team is going to be part of this show as well, we are not going to have a booth here but very active networking by our french MySQL team around the event. Come to meet us and talk to us! NEW!! Converge Conference, Glasgow, Scotland, August 15-16, 2014  MySQL Community Manager, David Stokes attends with MySQL talk. NEW!! CakeFest, Madrid, Spain, August 21-24, 2014  A talk on "Scaling Your MySQL instances AND keeping your Sanity" will be given by the MySQL Community Manager, David Stokes. Froscon 2014, St.Augustin, Germany, August 23-24, 2014 Please visit our booth as well as watch the Froscon website for the schedule updates. NEW!! SymfonyLive, UK, London, September 25-26, 2014 MySQL Community Magers, David Stokes & Morgan Tocker submitted MySQL talks for this show. Schedule will be announced later on. DrupalCon Amsterdam, The Netherlands, September 29-Oct 3, 2014 Meet us at our booth at DrupalCon Amsterdam. For the schedule please watch the DrupalCon website. All Your Base, Oxford UK, October 17, 2014  Come to visit our MySQL booth and talk to our MySQL experts. NEW!! WebTechCon / IPC, Munich Germany, October 26-29, 2014 NEW!! DOAG, Nuremberg, Germany, November 18-20, 2014 There will be a full day of MySQL talks and one full day of MySQL workshop & sessions with live demo. This event is simply hard to miss! NEW!! Forum PHP Paris, France, November 21-22, 2014 More details: TBD NEW!! UK OUG, Liverpool, UK, December 8-10, 2014 MySQL will be part of the Oracle booth and we hope to get more space for MySQL talks.  USA NEW!! Texas Linux Fest, Austin, Texas, US, June 13-14, 2014 NEW!! SouthEast Linux Fest, Charlotte, US, June 20-22, 2014 NEW!! Debian Conference 2014, Portland, OR, US, August 23-31, 2014 NEW!! FossetCon, Orlando, US, September 11-13, 2014 NEW!! Oracle Open World, San Francisco, US, September 29-October 3, 2014 NEW!! MySQL Central @ Open/World, San Francisco, US, September 29-October 3, 2014 NEW!! PyTexas 2014, Dallas, TX, US, October 3-5, 2014 NEW!! All Things Open (replacing POSSCON), Raleigh, NC, October 23-24, 2014 NEW!! Ohio LinuxFest 2014, Columbus, Ohio, US, October 24-25, 2014 NEW!! ZendCon PHP, Santa Clara, US, October 27-30, 2014 NEW!! Kuali Days 2014, Indianapolis, US, November 10-13, 2014 NEW!! Live 360, Orlando, FL, US, November 17-20, 2014 APAC OpenSourceConference Japan, Hokkaido, June 13-14, 2014 MySQL is represented by Ryusuke Kajiyama with the talk on "MySQL Technology Updates". NEW!! db tech showcase, Osaka Japan, June 18-20, 2014 Three MySQL talks are scheduled for this show, "MySQL for Oracle DBA" & "MySQL Technology Updates" by Ryusuke Kajiyama. The last talk will be on MySQL Fabric by Yoshiaki Yamasaki. NEW!! PyCon Singapore, Singapore, June 18-20, 2014 Ryusuke Kajiyama will be talking about "Sharding and scale-out using Python-based MySQL Fabric". NEW!! COSCUP, Taipei, Taiwan, July 19-20, 2014 We are going to run a technical session on MySQL Workbench & one talk on how to make MySQL better MySQL. NEW!! PyCon New Zealand, Wellington, New Zealand, September 13-14, 2014 MySQL talks were submitted as well as one talk by Solaris Modernization team on Python & Solaris, watch the website for schedule updates. NEW!! PyCon Japan, Tokyo Japan, September 13-15, 2014 MySQL will be a MySQL session speaker, no schedule is announced yet. Ruby Kaigi, Tokyo, Japan, September 18-20, 2014 Another event MySQL supports and attends in APAC region. Ruby Kaigi is the international Ruby Conference in Japan, Tokyo. Ruby started in Japan, so Ruby Kaigi has excellent speakers and developers! MySQL team is going to be present at this conference with MySQL talks and active networking around the venue. NEW!! PyCon India, Bangalore, India, September 26-28, 2014 A MySQL talk on "MySQL Utilities scaling MySQL with Python" has been submitted, please watch the PyCon website for the schedule updates. NEW!! OpenSourceConference Japan, Tokyo, October 18-19, 2014 NEW!! OpenSource India, Bengaluru, India, November 7-8, 2014 NEW!! OpenSourceConference Japan, Fukuoka, November 14-15, 2014 You can check the MySQL wikis for updates on the conferences we are attending. Next time I hope to have more details for each event above (especially for the US ones).

  Read the article

• svn 503 error when commit new files

  - by philipp

  I am struggling with a strange error when I try to commit my repository. I have a V-server with webmin installed on it. Via Webmin I installed an svn module, created repositories and everything worked fine until three days ago. Trying to commit brings the following error: Commit failed (details follow): Server sent unexpected return value (503 Service unavailable) in response to PROPFIND request for '/svn/rle/!svn/wrk/a1f963a7-0a33-fa48-bfde-183ea06ab958/RLE/.htaccess' Server sent unexpected return value (503 Service unavailable) in response to PROPFIND request for '/svn/rle/RLE/.htaccess' I google everywhere and found only very few solutions. One indicated that a wrong error document is set, another one dealt about the problem that filenames might cause this error and last but not least a wrong proxy configuration in the local svn config could be the reason. After trying all of the solutions suggested I could not reach anything. Only after a server reboot there was a little difference in the error-message, telling me that the server was not able to move a temp file, because the operation was permitted. So I also controlled the permissions of the svn directory, but also with no success. An svn update than restored the "normal" error from above and nothing changed since then. The only change I made on the server, I guess that this could be the reason why svn does not work anymore, was to install the php5_mysql module for apache via apt-get install php5_mysql. Atg the moment I have totally no idea where I could search. I don't know if the problem is on my server or in my repository and I would be glad to get any hint to solve this. Thanks in advance Greetings philipp error log: [Tue Oct 25 19:23:02 2011] [error] [client 217.50.254.18] Could not create activity /svn/rle/!svn/act/d8dd436f-d014-f047-8e87-01baac46a593. [500, #0] Tue Oct 25 19:23:02 2011] [error] [client 217.50.254.18] could not begin a transaction [500, #1] [Tue Oct 25 19:24:21 2011] [error] [client 217.50.254.18] Could not create activity /svn/rle/!svn/act/adac52c2-6f46-f540-b218-2f2ff03b51a4. [500, #0] http.conf: <Location /svn> DAV svn SVNParentPath /home/xxx/svn AuthType Basic AuthName xxx.de AuthUserFile /home/xxx/etc/svn.basic.passwd Require valid-user AuthzSVNAccessFile /home/xxx/etc/svn-access.conf Satisfy Any ErrorDocument 404 default RewriteEngine off </Location> The permissions for the repository directory are : rwxrwxrwx (0777). the directory /svn/rle/!svn/act/adac52c2-6f46-f540-b218-2f2ff03b51a4 does not exist on the server. I think this is part of the repository. So, I just just want to admit that i tried to reach the repository via Browser and i worked, I could see everything, so the error only occurs when I try to commit new files. I also created a second repository and tried to commit files in there, what gave me the same error.

  Read the article

• Can't install new database in OpenLDAP 2.4 with BDB on Debian

  - by Timothy High

  I'm trying to install an openldap server (slapd) on a Debian EC2 instance. I have followed all the instructions I can find, and am using the recommended slapd-config approach to configuration. It all seems to be just fine, except that for some reason it can't create my new database. ldap.conf.bak (renamed to ensure it's not being used): ########## # Basics # ########## include /etc/ldap/schema/core.schema include /etc/ldap/schema/cosine.schema include /etc/ldap/schema/nis.schema include /etc/ldap/schema/inetorgperson.schema pidfile /var/run/slapd/slapd.pid argsfile /var/run/slapd/slapd.args loglevel none modulepath /usr/lib/ldap # modulepath /usr/local/libexec/openldap moduleload back_bdb.la database config #rootdn "cn=admin,cn=config" rootpw secret database bdb suffix "dc=example,dc=com" rootdn "cn=manager,dc=example,dc=com" rootpw secret directory /usr/local/var/openldap-data ######## # ACLs # ######## access to attrs=userPassword by anonymous auth by self write by * none access to * by self write by * none When I run slaptest on it, it complains that it couldn't find the id2entry.bdb file: root@server:/etc/ldap# slaptest -f ldap.conf.bak -F slapd.d bdb_db_open: database "dc=example,dc=com": db_open(/usr/local/var/openldap-data/id2entry.bdb) failed: No such file or directory (2). backend_startup_one (type=bdb, suffix="dc=example,dc=com"): bi_db_open failed! (2) slap_startup failed (test would succeed using the -u switch) Using the -u switch it works, of course. But that merely creates the configuration. It doesn't resolve the underlying problem: root@server:/etc/ldap# slaptest -f ldap.conf.bak -F slapd.d -u config file testing succeeded Looking in the database directory, the basic files are there (with right ownership, after a manual chown), but the dbd file wasn't created: root@server:/etc/ldap# ls -al /usr/local/var/openldap-data total 4328 drwxr-sr-x 2 openldap openldap 4096 Mar 1 15:23 . drwxr-sr-x 4 root staff 4096 Mar 1 13:50 .. -rw-r--r-- 1 openldap openldap 3080 Mar 1 14:35 DB_CONFIG -rw------- 1 openldap openldap 24576 Mar 1 15:23 __db.001 -rw------- 1 openldap openldap 843776 Mar 1 15:23 __db.002 -rw------- 1 openldap openldap 2629632 Mar 1 15:23 __db.003 -rw------- 1 openldap openldap 655360 Mar 1 14:35 __db.004 -rw------- 1 openldap openldap 4431872 Mar 1 15:23 __db.005 -rw------- 1 openldap openldap 32768 Mar 1 15:23 __db.006 -rw-r--r-- 1 openldap openldap 2048 Mar 1 15:23 alock (note that, because I'm doing this as root, I had to also change ownership of some of the files created by slaptest) Finally, I can start the slapd service, but it dies in the attempt (text from syslog): Mar 1 15:06:23 server slapd[21160]: @(#) $OpenLDAP: slapd 2.4.23 (Jun 15 2011 13:31:57) $#012#011@incagijs:/home/thijs/debian/p-u/openldap-2.4.23/debian/build/servers/slapd Mar 1 15:06:23 server slapd[21160]: config error processing olcDatabase={1}bdb,cn=config: Mar 1 15:06:23 server slapd[21160]: slapd stopped. Mar 1 15:06:23 server slapd[21160]: connections_destroy: nothing to destroy. I manually checked the olcDatabase={1}bdb file, and it looks fine to my amateur eye. All my specific configs are there. Unfortunately, syslog isn't reporting a specific error in this case (if it were a file permission error, it would say). I've tried uninstalling and reinstalling slapd, changing permissions, Googling my wits out, but I'm tapped out. Any OpenLDAP genius out there would be greatly appreciated!

  Read the article

• SSH into Fedora 17 will not work with new users

  - by psion

  I just deployed a new Fedora 17 server on the Amazon EC2. I was able to log in as ec2-user with my generated keypair, but I cannot log in under normal circumstances as a user I created. This is just a normal ssh: ssh user@ip-address Any ideas on what is going on here? EDIT: This is a snippit from my sshd_config file # To disable tunneled clear text passwords, change to no here! PasswordAuthentication no #PermitEmptyPasswords no PasswordAuthentication no EDIT AGAIN: This is the output of ssh -v. OpenSSH_5.8p2, OpenSSL 1.0.0i-fips 19 Apr 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to 107.23.2.165 [107.23.2.165] port 22. debug1: Connection established. debug1: identity file /home/psion/.ssh/id_rsa type 1 debug1: identity file /home/psion/.ssh/id_rsa-cert type -1 debug1: identity file /home/psion/.ssh/id_dsa type 2 debug1: identity file /home/psion/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9 debug1: match: OpenSSH_5.9 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA 19:cb:84:21:a9:0e:83:96:2f:6a:fa:7d:ce:39:0f:31 debug1: Host '107.23.2.165' is known and matches the RSA host key. debug1: Found key in /home/psion/.ssh/known_hosts:5 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug1: Next authentication method: gssapi-keyex debug1: No valid Key exchange context debug1: Next authentication method: gssapi-with-mic debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_1000' not found debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_1000' not found debug1: Unspecified GSS failure. Minor code may provide more information debug1: Unspecified GSS failure. Minor code may provide more information debug1: Next authentication method: publickey debug1: Offering DSA public key: /home/psion/.ssh/id_dsa debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug1: Offering RSA public key: /home/psion/.ssh/id_rsa debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug1: No more authentication methods to try. Permission denied (publickey,gssapi-keyex,gssapi-with-mic).

  Read the article

• Windows 7 x64 installation freezes on new PC build

  - by jhsowter

  Symptoms While attempting to install Windows 7 (64 bit) on my new PC build, it freezes usually at the point where it is expanding the windows image, but has frozen as early as accepting the licence agreement, and as late as just after the first restart. My specs are at the bottom of the post. So far I have tried the following to identify the problem, in rough chronological order: Tried different hard drives with different sata cables. Same symptoms. I later used a different computer to install windows on the same hard drive with no problems. Tried the RAM in different slots, and tried one RAM stick instead of two. Same symptoms. Updated the BIOS to 1.60. Same symptoms. Ran Memtest86+ with RAM in dual channel. It passed about 6 times when I left it running overnight. Used USB to install windows instead of an optical drive. Same symptoms. Change SATA configuration from AHCI to IDE. Same symptoms. Tried various different SATA ports. Same symptoms. Updated BIOS to 1.70. Same symptoms. I saw the RAM did not list my motherboard as being supported even though the motherboard did list the RAM as being supported. So I tried some Kingston DDR3 1333MHz RAM instead. Same symptoms. Other (possibly) pertinent information My CPU idles at about 30 °C. I can't tell what it gets to when it's working. When I installed the CPU, the lever which locks the CPU in place took quite a bit of force to pull down. Now I didn't just yank it down without rechecking the CPU was seated properly about 5 times, but it does seems unusual, and I wonder if the CPU was seated badly if I would see these symptoms? I am out of ideas and don't know how to diagnose any further. I suppose either the motherboard or CPU must be the problem. I am on the verge of taking it to a specialist. The Question How should I proceed from here? Is there anything I can rule out as being the source of the symptoms I am seeing? My Specs CPU: Intel i5 3570k RAM: G.Skill RipjawsX 8GB kit HDD: single 3.5" 500GB SATA or 160GB 2.5" SATA (at different times and sometime together. But no RAID or anything). MB: ASRock Extreme4 Z77 PSU: Silverstone Strider Plus 600W ST60F-P

  Read the article

• How to move a ruby on rails application to a new server

  - by ManiacZX

  I have a rails app on an old Ubuntu server I need to move onto a new machine. I haven't worked with ruby on rails so I don't really know anything about the structure of the app. I want to load this onto an Ubuntu 8.04 AMI on Amazon EC2 and am looking for any information regarding the migration process such as: Do I copy over the entire folder defined as the application root in the mongrel config (for ex: /u/apps/myapp/current) or just certain folders? Am I looking for trouble if I go with the latest versions of ruby and the various gems? Any general gotchas to look out for in the process. Current server information: root@webnode001:/# cat /proc/version Linux version 2.6.15-27-server (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP Fri Dec 8 18:43:54 UTC 2006 root@webnode001:/# rails -v Rails 1.2.3 root@webnode001:/# mongrel_rails cluster::configure --version Version 1.0.1 root@webnode001:/# gem -v 0.9.0 root@webnode001:/# gem list -l *** LOCAL GEMS *** actionmailer (1.3.3, 1.2.5) Service layer for easy email delivery and testing. actionpack (1.13.3, 1.12.5) Web-flow and rendering framework putting the VC in MVC. actionwebservice (1.2.3, 1.1.6) Web service support for Action Pack. activerecord (1.15.3, 1.15.2, 1.14.4) Implements the ActiveRecord pattern for ORM. activesupport (1.4.2, 1.4.1, 1.3.1) Support and utility classes used by the Rails framework. cgi_multipart_eof_fix (2.1) Fix an exploitable bug in CGI multipart parsing which affects Ruby <= 1.8.5 when multipart boundary attribute contains a non-halting regular expression string. daemons (1.0.7, 1.0.5, 1.0.4, 1.0.2) A toolkit to create and control daemons in different ways eventmachine (0.7.2, 0.7.0) Ruby/EventMachine socket engine library fastercsv (1.2.0, 1.1.0) FasterCSV is CSV, but faster, smaller, and cleaner. fastthread (1.0) Optimized replacement for thread.rb primitives ferret (0.11.4) Ruby indexing library. gem_plugin (0.2.2, 0.2.1) A plugin system based only on rubygems that uses dependencies only mongrel (1.0.1, 0.3.13.4) A small fast HTTP library and server that runs Rails, Camping, Nitro and Iowa apps. mongrel_cluster (0.2.1) Mongrel plugin that provides commands and Capistrano tasks for managing multiple Mongrel processes. mysql (2.7) MySQL/Ruby provides the same functions for Ruby programs that the MySQL C API provides for C programs. piston (1.3.3) Piston is a utility that enables merge tracking of remote repositories. rails (1.2.3, 1.1.6) Web-application framework with template engine, control-flow layer, and ORM. rake (0.7.3, 0.7.1) Ruby based make-like utility. sources (0.0.1) This package provides download sources for remote gem installation swiftiply (0.5.1) A fast clustering proxy for web applications.

  Read the article

• Looking for a new backup solution to replace dying tape drive

  - by E3 Group

  We're running Windows Server 2003 SBS and another machine with Server 2003 Standard on it. The SBS server is about 7 years old running pretty much 24/7 - a HP server of some description. We have an Ultrium 448 cycling LTO2 400GB tapes daily and incrementally backing up approximately 100gb worth of data (20gb C:\ and system state, 40gb exchange, 40gb database for some crap marketing software) on BackupExec 10D. As of 5 months ago, the backups have been consistently failing with IO errors, bad reads and some write errors. When I say consistent, I mean every time and we haven't had a proper backup for the entire 5 months - So if the server explodes tomorrow, 7 years worth of data will just cease to exist. I've only just recently rejoined the company and am looking at rectifying the more concerning problems, so the first thing I did was try a backup to an USB2.0 external drive. It was excruciatingly slow. In fact it was so slow it took 40 hours and it still wasn't finished. I ended up cancelling it and reconfiguring the selections again to reduce file size. This, however, isn't a permanent solution. I concluded that the IO error was either from a faulty tape drive (which has a tape stuck in there right now and not coming out) or from a dying SCSI controller. Neither of them are good news and both are extremely expensive to fix. I'm operating on an extremely low budget so have been looking at outsourcing the backups. A company in Sydney (where I'm located) offer incremental online backups via a NAS. It costs almost double a new tape drive but offers monthly repayments which will let us get through times when cash flow is minimal. It seems like a sweet deal but it is still a little bit pricey. So I'm looking for a cheaper, yet reliable solution. Maybe some in-house NAS or something offsite? The idea is to avoid using tapes. Are there any recommendations for rectifying my current situation? Or are tapes the only way to go? I'm concerned that the server will die one day in the near future and I must be able to restore it to another server with different hardware.

  Read the article

• New monitor connected to HDMI adaptor doesn't show output after booting

  - by Paul

  Hello out there in the multiple monitors’ world. I am a very old newbie in your world and need help. I just purchased a new Asus VH236H monitor and hooked it up the HDMI port of an ATI Radeon HD4300 / 4500 Series display adaptor. I left the old Princeton LCD19 (TMDS) hooked up to the DVI port of the same display adaptor. Both monitors displayed the boot sequence, after I fired good old Sarastro2 (Asus P5Q Pro Turbo – Dual Core E5300 – 2.60 GHz) up. The Asus lacked one half of a second behind the Princeton until the Windows 7 Ultimate SP 1 boot up was complete. Then the Asus displayed “HDMI NO SIGNAL” and went into hibernation. The Princeton stayed lit up as before. Both monitors are displayed on the “Screen Resolution Setup Display” and I plaid around with them for a while. The only thing I accomplished was to shove the desktop icons from the Princeton to the still hibernating Asus. The “Multiple displays:” is set to “Extend these displays”, the Orientation is “Landscape” and the Resolutions are set on both to the “recommended” one. Both monitors show that they work properly in the advanced Properties display. What am I doing wrong, what am I missing? Never mind the opinions about the different resolutions of the two monitors. I always can unhook the Princeton and give it to a Goodwill Store if I do not like the setup. I just would like to make it work. Any constructive help is very much appreciated, Thank you. Thank you Anees Bakrain Only the ATI Radeon HD 4300/4500 Series adapter is displayed in the Device Manager, for that reason I have to assume that the onboard display adaptor is not active. All 40 drivers of Sarastro2 are up to date and the HDMI cable can not be the problem because both monitors displayed the boot sequence up to the moment when Windows 7 was loaded completely. This was the moment, when the Asus monitor lost its signal. Both connectors, HDMI and DVI are connected and removing the DVI connector would not solve my problem of running both monitors simultaneously. However, your suggestions shifted my seventy one year old brain into the next gear. The only question remaining is; “Why the signals to the Asus monitor stop after the sequence is complete”. The ATI Radeon HD 4300/4500 Series adapter seems to be capable of sending simultaneous HDMI and DVI signals, what is done during the boot sequence. Why do the signals change after the boot sequence is complete is the key question or der springende Punkt? Is this a correct assumption slhck?

  Read the article

• Hard freeze on new computer

  - by mphair

  OCZ Gold 3x2GB 240-Pin DDR3 SDRAM PC312800 Palit NE5T240SFHD01 GeForce GT240 1GB 128-bit GDDR5 ASUS P7P55D-E LGA 1156 P55 SATA 6Gb/s USB 3.0 ATX Intel Motherboard Intel Core i7-860 Lynnfield 2.8GHz 8MB L3 Cache LGA 1156 95W Quad-Core Processor SAMSUNG 22X Optical drive (DVD+-R/RW) CORSAIR CMPSU-620HX 620W ATX12V V2.2 Windows 7 Ultimate x64 Brand new system (got it from newegg two days ago) and it booted up and installed windows and ran for a day just fine. Yesterday, I boot it up in the afternoon and run various games at full graphics for most of the day. I turn on WoW and play for a few hours and it hard stalls. No numlock switching, no mouse feedback but nothing going wrong on the screen. No BSOD. I wait a bit to see if the stall is just a temporary one, but then force shutdown the computer. Upon reboot, everything seems fine, windows sees that it didn't shut down properly but I go into normal boot and restart WoW. I'm able to load it up and start running around when it freezes again. This time when I restart, it doesn't even get to BIOS. It starts (power goes on) and it just hangs with no output to the monitors. I shut it off and went to bed. This morning, I turned it on and went into BIOS setup. I'm not terribly experienced with messing with BIOS settings but I checked over them the best I could. Everything seems fine so I boot into windows and browse the internet for a bit looking for a solution, hard freeze within 10 minutes. I restart and go into BIOS and check the CPU temperature, 40c. I'm kinda stumped here. Some people say it might be a memory issue, but why would it take so long for it to come up? Could it have been slowly accessing one memory stick at a time and then it just got to a bad one and that's what is causing it to fail? It seems odd that I don't get a BSOD from a hardware failure. Having the screen just halt with no input or output change seems like a software thing to me. Any thoughts?

  Read the article

• Repair BAD Sectors or Buy a new HDD?

  - by Nehal J. Wani

  I have a Seagate internal hard disk drive. I recently opened up my laptop [Dell Inspiron N5010] [Warranty has expired], cleaned it and it worked normally after waking up from hibernation. However, when I restarted it, it stuck on windows loading screen, then tried to boot from Dell recovery partition but failed. It gave the error: Windows has encounter a problem communicating with a device connected to your computer. This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removable storage is properly connected and then restart your computer If you continue to receive this error message, contact the hardware manufacturer. Status: 0xc00000e9 Info: An unexpected I/O error has occurred. While cleaning, I had mistakenly touched the round silvery thing at the bottom of the HDD. I don't know whether this has caused the problem or not. Since I have Fedora also installed in the same HDD, I can boot from it but it shows weird read errors when I ask it to mount Windows partitions. The disk utility also says that the Hard Disk has many bad sectors and needs to be replaced. I downloaded Seatools from Seagate website and used it. In the long test, I gave it permission to repair the first 100 errors which it did successfully. Now I am confused at what I should do. Internal Hard Disk Costs: a. Internal HDD 500GB Costs: Rs3518 b.1 External HDD 500GB Costs: Rs3472 b.2 External HDD 1TB Costs: Rs5500 c. Internal to External Converter Costs: Rs650 I have the following options: (i) Buy an External HDD, backup my data. Try to repair bad sectors of HDD. Then two cases arise: (a) My Internal HDD gets repaired [almost] (b) My internal HDD doesn't get repaired. Then I need to buy another internal HDD and replace the damaged one. OR break the seal of the external one and put it inside my laptop as internal. Breaking the case involves risks. (ii) Buy a Internal HDD and an Internal to External Converter Case [Not very reliable], backup my data. Try to repair bad sectors of HDD. Then two cases arise: (a) My Internal HDD gets repaired [almost] (b) My internal HDD doesn't get repaired. Then I need to just put in the new internal HDD I just bought. Experts, please guide me as to what will be the most VFM option? Also, if a HDD is failing, is it that I shouldn't read from it too otherwise there is a chance of other sectors failing? What I mean is, is it wrong to read from the HDD without taking backup first?

  Read the article

• IE won't load PDF in a window created with window.open

  - by Dean

  Here's the problem, which only occurs in Internet Explorer (IE). I have a page that has links to several different types of files. Links from these files execute a Javascript function that opens a new window and loads the specific file. This works great, unless the file I need to open in the new window is a PDF in which case the window is blank, even though the URL is in the address field. Refreshing that window using F5 doesn't help. However, if I put the cursor in the address field and press <enter> the PDF loads right up. This problem only occurs in IE. I have seen it in IE 7 and 8 and am using Adobe Acrobat Reader 9. In Firefox (PC and Mac) everything works perfectly. In Chrome (Mac), the PDF is downloaded. In Safari (Mac) it works. In Opera (Mac) it prompts me to open or save. Basically, everything probably works fine, except for IE. I have searched for similar problems and have seen some posts where it was suggested to adjust some of the Internet Options on IE. I have tried this but it doesn't help, and the problem wasn't exactly the same anyway. Here's the Javascript function I use to open the new window. function newwin(url,w,h) { win = window.open(url,"temp","width="+w+",height="+h+",menubar=yes,toolbar=yes,location=yes,status=yes,scrollbars=auto,resizable=yes"); win.focus(); } You can see that I pass in the URL as well as the height, h, and width, w, of the window. I've used a function like this for years and as far as I know have never had a problem. I call the newwin() function using this. <a href="javascript:newwin('/path/document.pdf',400,300)">document.pdf</a> (Yes, I know there are other, better ways than using inline JS, and I've even tried some of them because I've run out of things to try, but nothing works.) So, if anyone has an idea as to what might be causing this problem, I'd love to hear it.

  Read the article

• How to start new browser window in cpecified location whith cpecified size

  - by Pritorian

  Hi all! I create a new instance and trying to resize new instance of browser like this: [System.Runtime.InteropServices.DllImport("user32.dll")] private static extern bool GetWindowInfo(IntPtr hwnd, ref tagWINDOWINFO pwi); [System.Runtime.InteropServices.StructLayout(System.Runtime.InteropServices.LayoutKind.Sequential)] public struct tagRECT { /// LONG->int public int left; /// LONG->int public int top; /// LONG->int public int right; /// LONG->int public int bottom; } [System.Runtime.InteropServices.StructLayout(System.Runtime.InteropServices.LayoutKind.Sequential)] public struct tagWINDOWINFO { /// DWORD->unsigned int public uint cbSize; /// RECT->tagRECT public tagRECT rcWindow; /// RECT->tagRECT public tagRECT rcClient; /// DWORD->unsigned int public uint dwStyle; /// DWORD->unsigned int public uint dwExStyle; /// DWORD->unsigned int public uint dwWindowStatus; /// UINT->unsigned int public uint cxWindowBorders; /// UINT->unsigned int public uint cyWindowBorders; /// ATOM->WORD->unsigned short public ushort atomWindowType; /// WORD->unsigned short public ushort wCreatorVersion; } [System.Runtime.InteropServices.DllImport("user32.dll")] private static extern bool MoveWindow(IntPtr hWnd, int X, int Y, int nWidth, int nHeight, bool bRepaint); [System.Runtime.InteropServices.DllImport("user32.dll")] private static extern bool UpdateWindow(IntPtr hWnd); private void button2_Click(object sender, EventArgs e) { using (System.Diagnostics.Process browserProc = new System.Diagnostics.Process()) { browserProc.StartInfo.FileName = webBrowser1.Url.ToString(); browserProc.StartInfo.WindowStyle = System.Diagnostics.ProcessWindowStyle.Minimized; int i= browserProc.Id; tagWINDOWINFO info = new tagWINDOWINFO(); info.cbSize = (uint)System.Runtime.InteropServices.Marshal.SizeOf(info); browserProc.Start(); GetWindowInfo(browserProc.MainWindowHandle, ref info); browserProc.WaitForInputIdle(); string str = browserProc.MainWindowTitle; MoveWindow(browserProc.MainWindowHandle, 100, 100, 100, 100, true); UpdateWindow(browserProc.MainWindowHandle); } } But I get an "No process is associated with this object". Could anyone help? Or mb other ideas how to run new browser window whith specified size and location?

  Read the article

• Opening pop up in Joomla

  - by user258100

  I am trying to have people be able to open HTML widgets by clicking on a button in my Joomla page. All the widgets are different sizes. The code is entered as HTML in Jumi. Currently I have the action set to: "On click open in new window without browser navigation." The problem is this this always opens in a full screen size with the widget showing up in a corner. How do I control the size of this new window for each widget? Thanks

  Read the article

• Create new etherpad using PHP and CURL

  - by Kyle Mathews

  I'm trying to write a simple PHP script which automatically sets up new etherpads (see http://etherpad.com/). They don't have an API (yet) for creating new pads so I'm trying to figure if I can do things another way. After playing around some, I found that if you append a random string to etherpad.com to a not-yet-created pad, it'll come back with a form asking if you want to create a new etherpad at that address. If you submit that form, a new pad will be created at that URL. My thought then was I could just create a PHP script using CURL that would duplicate that form and trick etherpad into creating a new pad at whatever URL I give it. I wrote the script but so far I can't get it working. Can someone tell me what I'm doing wrong? First, here's the HTML form on the etherpad creation page: ` <p><tt id="padurl">http://etherpad.com/lsdjfsljfa-fdj-lsdf</tt></p> <br/> <p>There is no EtherPad document here. Would you like to create one?</p> <input type="hidden" value="lsdjfsljfa-fdj-lsdf" name="padId"/> <input type="submit" value="Create Pad" id="createPad"/> ` Then here's my code which tries to submit the form using CURL $ch = curl_init(); //set POST variables $url = "http://etherpad.com/ep/pad/create?padId=ldjfal-djfa-ldkfjal"; $fields = array( 'padId'=>urlencode("ldjfal-djfa-ldkfjal"), ); $useragent="Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30)"; // set user agent curl_setopt($ch, CURLOPT_USERAGENT, $useragent); //url-ify the data for the POST foreach($fields as $key=>$value) { $fields_string .= $key.'='.$value; } print_r($fields_string); //open connection $ch = curl_init(); //set the url, number of POST vars, POST data curl_setopt($ch,CURLOPT_URL,$url); curl_setopt($ch,CURLOPT_POST,count($fields)); curl_setopt($ch,CURLOPT_POSTFIELDS,$fields_string); //execute post $result = curl_exec($ch); print_r($result); //close connection curl_close($ch); When I run the script, PHP reports back that everything executed correctly but etherpad doesn't create my pad. Any clues what's going on?

  Read the article

• Referencing both an old version and new version of the same DLL (VB.Net)

  - by ckittel

  Consider the following situation: WidgetCompany produced a .NET DLL in 2006 called Widget.dll, version 1.0. I consumed this Widget.dll file throughout my VB.Net application. Over time, WidgetCompany has been updating Widget.dll, I never bothered to keep up, continuing to ship version 1.0 of Widget.dll with my software. It's now 2010, my project is now a VB.Net 3.5 application and WidgetCompany has come out with Widget.dll version 3.0. It looks and functions almost identical to Widget.dll version 1.0, using all the same namespaces and type names from before. However, Widget.dll version 3.0 has many run-time breaking changes since 1.0 and I cannot simply cut over to the new version; however, I don't want to continue developing against the 1.0 version and therefore keep digging myself deeper in the hole. What I want to do is do all new development in my project with Widget.dll version 3.0, whilst keeping Widget.dll version 1.0 around until I find time to convert all of my 1.0 consumption to the newer 3.0 code. Now, for starters, I obviously cannot simply reference both Widget.dll (Ver 1.0) and Widget.dll (Ver 3.0) in Visual Studio. Doing so gives me the following message: "A reference to 'Widget.dll' could not be added. A reference to the component 'Widget' already exists in the project." To work around that, I can simply rename version 3.0 Widget.dll to Widget.3.dll. But this is where I'm stuck. Any attempts to reference types found in "the dll" leads to ambiguity and the compiler obviously doesn't have any clue as to what I really want in this or that case. Is there something I can do that gives a DLL a new "root" Namespace or something? For example, if I could say "Widget.dll has a new root namespace of Legacy" then I could update existing code to reference the types found in Legacy.<RootNamespace> namespace while all new code could simply reference types from the <RootNamespace> namespace. Pipe dream or reality? Are there other solutions to situations this (besides "don't get in this situation in the first place")?

  Read the article

• Why can't I reclaim my dynamically allocated memory using the "delete" keyword?

  - by synaptik

  I have the following class: class Patient { public: Patient(int x); ~Patient(); private: int* RP; }; Patient::Patient(int x) { RP = new int [x]; } Patient::~Patient() { delete [] RP; } I create an instance of this class on the stack as follows: void f() { Patient p(10); } Now, when f() returns, I get a "double free or corruption" error, which signals to me that something is attempted to be deleted more than once. But I don't understand why that would be so. The space for the array is created on the heap, and just because the function from inside which the space was allocated returns, I wouldn't expect the space to be reclaimed. I thought that if I allocate space on the heap (using the new keyword), then the only way to reclaim that space is to use the delete keyword. Help! :)

  Read the article

< Previous Page | 101 102 103 104 105 106 107 108 109 110 111 112  | Next Page >