Search Results

Search found 17374 results on 695 pages for 'option strict'.

Page 105/695 | < Previous Page | 101 102 103 104 105 106 107 108 109 110 111 112  | Next Page >

• X11 performance problem after upgrading from Centos3 to Centos5 with an ATI Rage XL

  - by Marcelo Santos

  After upgrading a computer from Centos3 to Centos5 an application that does a lot of scrolling took a very high performance hit. top tells me that X is using a lot of CPU and that was not happening before. The machine has an ATI Rage XL with 8MB and X is using the ati driver as there is no proprietary ATI driver for this board on linux. The xorg.conf: Section "Device" Identifier "Videocard0" Driver "ati" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Group 0 Mode 0666 EndSection A similar machine that still has Centos3 installed is able to start DRI on the X server while this one is not, this is the Xorg.0.log for the Centos5 machine: drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed [drm] failed to load kernel module "mach64" (II) ATI(0): [drm] drmOpen failed (EE) ATI(0): [dri] DRIScreenInit Failed (II) ATI(0): Largest offscreen areas (with overlaps): (II) ATI(0): 1024 x 1279 rectangle at 0,768 (II) ATI(0): 768 x 1280 rectangle at 0,768 (II) ATI(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Lines Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 10 256x256 slots (==) ATI(0): Backing store disabled (==) ATI(0): Silken mouse enabled (II) ATI(0): Direct rendering disabled (==) RandR enabled I also tried using EXA instead of XAA and setting: Option "AccelMethod" "XAA" Option "XAANoOffscreenPixmaps" "true" uname -a Linux sir5.erg.inpe.br 2.6.18-128.7.1.el5 #1 SMP Mon Aug 24 08:20:55 EDT 2009 i686 i686 i386 GNU/Linux rpm -qa | grep xorg-x11-server xorg-x11-server-utils-7.1-4.fc6 xorg-x11-server-sdk-1.1.1-48.52.el5 xorg-x11-server-Xvfb-1.1.1-48.52.el5 xorg-x11-server-Xnest-1.1.1-48.52.el5 xorg-x11-server-Xorg-1.1.1-48.52.el5 The drmOpenDevice error continues when using the suggested Option "AIGLX" "true".

  Read the article

• DNS NAmeserver Aname and cname records

  - by David

  Hi - I am inexperienced in the configuration of DNS and have an issue with dominan hosting set up. I have two domains 'www.mydomain1.com' and 'www.mydomain2.com', with mydomain2 pointed at the same place as mydomain1. The domains were passed to me recently by the person who previoulsy controlled them. I have an account with fasthosts in the uk. When I accepted the domains I could not access the DNS settings and enquired with fasthosts as to why. The replied saying 'The delegate hosting option for both domains were enabled and this is the reason why you were unable to find the option to edit the advanced DNS records. I have now disabled the delegate hosting option so you can now edit the advanced DNS records for both domains in your account.' When i log into the fasthost control panel now i can access the DNS controls but both domains have no A Record of Cname record set up. I am concerned that fasthosts have blatted the previous Nameserver entries and set me up on theirs but not added any record. 'www.mydomain1.com' currently still works but 'www.mydomain2.com' does not find the site anymore. i am worried i will lose mydomain1 to as teh dns changes filter through the system. my webhosting is at 'xxx.xxx.xxx.xxx/mydomain1.com/' and this is where I want both domains to point. Any advice would be much appreciated. one thing which is confusing me is that because I am on a shared server I have to put 'xxx.xxx.xxx.xxx/mydomain1.com/' to get to my site rather than just 'xxx.xxx.xxx.xxx'. The form on fasthosts for the aname record only allows an IP to be entered - does it add the mydomain1.com/ onto the end itself? Thanks for any help given - I'm quite worried about this David

  Read the article

• CPU / Affinity mask problem in SQL 2005

  - by Robert Moir

  Hi folks, Having a problem with a SQL Server which was virtualised. The CPU mask was set on the physical host for some reason and now advanced options are not available. So I need to reconfigure the CPU affinity mask settings - which are advanced options, so this is blocked because of the affinity mask issue. I've tried doing this from the SQL server in single user command line mode, I've googled and found lots of people with similar problems but no real solution. I'm stumped. Any ideas? Sample commands and output from query analyser below. sp_configure 'show advanced options', 1 GO RECONFIGURE WITH OVERRIDE GO sp_configure 'affinity mask', 0x00000000 GO RECONFIGURE GO ----------------------------------------- Configuration option 'show advanced options' changed from 0 to 1. Run the RECONFIGURE statement to install. Msg 5832, Level 16, State 1, Line 1 The affinity mask specified does not match the CPU mask on this system. Msg 15123, Level 16, State 1, Procedure sp_configure, Line 51 The configuration option 'affinity mask' does not exist, or it may be an advanced option.

  Read the article

• .NET Framework 1.1 on IIS 7

  - by Zack Peterson

  I have inherited a .NET Framework 1.1 web site that I must host with IIS 7 on Windows Server 2008. I'm having some trouble. 1. Installation I installed .NET Framework 1.1 following these instructions. The installation automatically created a new Application Pool "ASP.NET 1.1". I use that. 2. Trouble When I launch the web site I see web.config runtime errors: The tag contains an invalid value for the 'culture' attribute. I fix that one and then see: Child nodes are not allowed. I don't want to keep playing this whack-a-mole game. Something must be wrong. 3. Am I sure this is .NET 1.1? I examine the automatically created application pool. I see that it's 1.1. Advanced Settings... Basic Settings... This doesn't seem right. While 1.1 is set, it's not an option in the Advanced drop down selectors. And why in the Basic box is it just "v1.1" and not ".NET Framework v1.1.4322"? That would be more consistent. 4. I cannot create other .NET 1.1 App Pools I cannot select .NET Framework 1.1 for other application pools. It's not an option in the drop down selectors. What's up with that? What now? Why isn't v1.1 an option for all AppPools? How can I verify my application is in fact using .NET Framework 1.1? Why might I get these runtime errors?

  Read the article

• windows 7: Event 55 The file system structure on the disk is corrupt and unusable

  - by Radio

  Here is a real bad one! Windows 7 RTM with SP1 installed [Version 6.1.7601]. Recently tried to delete some folder on my hard drive and Windows prompted "Error 0x80070570: The file or directory is corrupted and unreadable", and at the same time placed an Event 55 describing "The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on \Device\HarddiskVolume2." Ran chkdsk, first with /f option, then with /r option. Result in both cases was: no errors found, 0 bad sectors. No problems chkdsk found at all! Went through StackExchange, Google and spent over 6 hours on this. Still cannot figure out the problem. Re-installing/Re-Formatting is not an option! What did I try: Hotfix - Windows6.1-KB982927-x64.msu - gave me an error about incompatibility with my computer, however it totally matches my system. CRC of hotfix was ok. Windows Repair Console found startup errors and fixed those, but this didn't help an issue, even by running chkdsk c: /R from it. http://support.microsoft.com/kb/246026 does not promise anything good. sfc /scannow does not help too. Replaced hard drive by cloning an old one using True Image, repeated all steps above. At the same time, some minor glitches started to appear in my Windows, like side panel and notification area settings are getting reset. Goal is to delete the folder and get rid of Event 55. Sounds like NTFS bug. Please help. This is completely ridiculous.

  Read the article

• XP Suddenly asking for password

  - by ProfKaos

  Is there any sane explanation for a client's Acer Aspire 1 netbook, running XP Home SP 2, suddenly starting to ask for a login password at boot? He has a strict policy of not using passwords, and I removed his login password weeks ago. The story is that suddenly this morning, for the first time, it is asking for a login password.

  Read the article

• XP Suddenly asking for password

  - by ProfKaos

  Is there any sane explanation for a client's Acer Aspire 1 netbook, running XP Home SP 2, suddenly starting to ask for a login password at boot? He has a strict policy of not using passwords, and I removed his login password weeks ago. The story is that suddenly this morning, for the first time, it is asking for a login password.

  Read the article

• List repositories from multiple projects in Trac using mod_python

  - by Steffen Eriksen

  Currently working on a customized webpage that shows the available projects I have in Trac (1.0.1). I am using mod_python to connect the trac interface. I found a standard page for this, but it didn't show listing of repositories. The page showed some variables to link to the different projects, but I can't find variables to the different repositories inside the projects. I have set up the webpage from reading this: http://trac.edgewall.org/wiki/TracInterfaceCustomization (under Site Appearance) Short summary; editing ../conf.d/trac.conf: PythonOption TracEnvParentDir /parent/dir/of/projects PythonOption TracEnvIndexTemplate /path/to/template And making a template file I can edit at /path/to/template: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xmlns:py="http://genshi.edgewall.org/" xmlns:xi="http://www.w3.org/2001/XInclude"> <head> <title>Available Projects</title> </head> <body> <h1>Available Projects</h1> <ul> <dl> <li py:for="project in projects" py:choose=""> <a py:when="project.href" href="$project.href" title="$project.description">$project.name</a> ## <dd> WANT TO ADD CODE HERE! </dd> <py:otherwise> <small>$project.name: <em>Error</em> <br /> ($project.description)</small> </py:otherwise> </li> </dl> </ul> </body> </html> So... The code I want to add is something like: <dd py:for="repos in project.repository" py:choose=""> <a py:when="repos.href" href="$repos.href"> $repos.name</a> </dd> I can't figure out where to add the variables, or if there already exists some variables I can use. After searching through the files it seemed like main.py had something to do with the variables (/usr/local/Trac-1.0.1/trac/web/main.py), but at first look it didn't seem easy to just add more variables. Is there a simple way to find the rest of the variables ? And how hard is it to add more variables? Will it perhaps be easier to do this an alternative way ? All I need is to link to the repositories dynamically

  Read the article

• Virtual Fileserver

  - by Sergei

  Hi, We are planning to move our production servers to the datacenter and virtualize remaining servers in the process.Datacenter will have HP blades with vSphere on top.Currentliy we are using Celerra NS20 as fileserver.Since datacenter is using HP kit and EVA 4400 as SAN, we cannot have Celerra there, as EMC supoprt for Celerra does not work for non EMC array. I have searched for possible options and one of them was to have HP NAS blade X3800sb instead of Celerra.However this seems like overkill for me.We are only using Celerra for about 100 users and 50 servers and I think having X3800sb could be waste of resources. The other option would be to have a virtual fileserver as a part of vmware environment in datacenter.We only need CIFS to be provided.The only option I can think of is Windows Storage server.We had a bad expirience with Windows servers used as fileservers ( memory leaks one thing) in the past and this was one of the reasons we moved to Celerra. What are the other options?We need something as reliable as Celerra with as many options as possible.For example , Celerra has per folder quotas, deduplication, dynamic volume allocation, automatic failover, VTLU, replication. Also we would need to replicate NAS data to the failover site.We could use block level replication , SAN-to-SAN, but this would mean wasted bandwidth, as we need only subset of folders to be replicated.We used CA XSoft for windows servers in the past and Celerra has option for Celerra replication. Thank you very much in advance, Please ask me if I missed any details!

  Read the article

• Win7 Credential manager and accessing SQL Server from outside of the domain

  - by David Lively

  My SQL Server is set to use windows authentication. If I am connected to the domain directly from my Win7 Ultimate x64 machine, SQL Management Studio (SSMS) will let me authenticate with Windows authentication. However, if I am connected via the VPN (from a different machine that is not joined to the domain), it won't. If I start SSMS with the following command line: C:\Windows\system32>runas /netonly /user:domainname\username "C:\Program Files (x86)\Microsoft SQL...\ssms.exe" then connecting to the SQL Server (which is in the domain) with Windows Authentication works fine. I'd like to save these credentials so that I don't have to launch SSMS from the command line, or modify the shortcut. I know I can use the SysInternals ShellRunAs extension to do this, but I again have to enter my domain username and password each time, and shift+right-click to see that menu option. The Windows Credential Manager seems designed to solve this problem, and works for network shares. However, it doesn't seem to work for SSMS. Any suggestions? I've tried using the /savecred option with runas to create the necessary credentials, but that appears to be incompatible with the /netonly option. Running the above command line with the addition of /savecred just displays the runas help screen. Grrr. Argh.

  Read the article

• What is wrong with my Watcher (incron-like) daemon?

  - by eric01

  I have installed Watcher this way: both watcher.py and watcher.ini are located in /etc I also installed pyinotify and it does work when I use python -m pyinotify -v /var/www However, I want to use the daemon and when I start watcher.py, I get weird lines on my watcher.log (see below). I also included my watcher.ini file. Note: I have the latest version of Python. The watcher.py can be found here What is wrong with what I did? Also, do I really need pyinotify? Thanks a lot for your help watcher.ini: [DEFAULT] logfile=/var/log/watcher.log pidfile=/var/run/watcher.pid [job1] watch=/var/www events=create,delete,modify recursive=true command=mkdir /home/mockfolder ## just using this as test watcher.log: 2012-09-22 04:28:23.822029 Daemon started 2012-09-22 04:28:23.822596 job1: /var/www Traceback (most recent call last): File "/etc/watcher.py", line 359, in <module> daemon.start() File "/etc/watcher.py", line 124, in start self.run() File "/etc/watcher.py", line 256, in run autoadd = self.config.getboolean(section,'autoadd') File "/usr/lib/python2.7/ConfigParser.py", line 368, in getboolean v = self.get(section, option) File "/usr/lib/python2.7/ConfigParser.py", line 618, in get raise NoOptionError(option, section) ConfigParser.NoOptionError: No option 'autoadd' in section: 'job1'

  Read the article

• when should be choose simple php mail and when smpt with loggin+password?

  - by user43353

  Hi, My Case: web application that need to send 1,000 messages per day to main gmail account. (Only need to send email, not need receive emails - email client) 1. option - use php mail function + sendmail + config php.ini php example: <?php $to = '[email protected]'; $subject = 'the subject'; $message = 'hello'; $headers = 'From: [email protected]' . "\r\n" . 'Reply-To: [email protected]' . "\r\n" . 'X-Mailer: PHP/' . phpversion(); mail($to, $subject, $message, $headers); ?> php.ini config (ubuntu): sendmail_path = /usr/sbin/sendmail -t -i pros:don't need email account, easy to setup cons:? 2. option - use Zend_Mail + transport on smpt+ password auto php example(need include Zend_Mail classes): $config = array('auth' => 'login', 'username' => 'myusername', 'password' => 'password'); $transport = new Zend_Mail_Transport_Smtp('mail.server.com', $config); $mail = new Zend_Mail(); $mail->setBodyText('This is the text of the mail.'); $mail->setFrom('[email protected]', 'Some Sender'); $mail->addTo('[email protected]', 'Some Recipient'); $mail->setSubject('TestSubject'); $mail->send($transport); pros:? cons:? Questions: Can 1 option be filtered by gmail email server as spam? please can you add pros + cons to options above Thanks

  Read the article

• Haproxy and CNAME

  - by user123354

  I want to create a simple load balancer for the two servers. The problem is with CNAME records, I think. Let's say I have two the same applications on AppFog.com. app1.aws.af.cm and app2.aws.af.cm Here is my haproxy.cfg file: global maxconn 2000 daemon defaults mode http clitimeout 60000 srvtimeout 30000 contimeout 4000 option httpclose listen http_proxy bind [myip]:80 mode http stats enable stats auth user:passwd stats uri /stats balance source option httpchk option forwardfor server host01 app1.aws.af.cm:80 maxconn 300 check server host02 app2.aws.af.cm:80 maxconn 300 check But this only resolving IP for domain app1.aws.af.cm and app2.aws.af.cm, which obviously doesn't work if I open this IP in web browser. The problem is that AppFog doesn't have public IP for application (same as OpenShift). How to do that Haproxy to perform a proper connection between Load Balancer and this two servers? Example: This is real app - http://freechat.eu01.aws.af.cm Haproxy only resolves IP for this domain which is 46.51.204.8:80 Of course this IP will not show my application, only an error page. Sorry for my poor English.

  Read the article

• Disaster recovery backup of files/photos for personal use

  - by Renesis

  I'm looking for the best method to store a backup of important files and 5+ years of digital photos that is safe from some type of fire/flood disaster in my home. I'm looking for: Affordable: Less than $100/yr or first-time cost. Reliable: At least a smaller chance of failing than there is of fire or flood Easy for initial backup and to add to, and at least semi-easy to recover. I recently purchased a small home safe for physical vitals. It was inexpensive, solid, and is fire/water safe. If I had a physical copy of the digital files, the safe would work fine for this, but I don't know what to store in it that adequately meets the requirements above. Hard drive - I read that the danger of it not spinning up makes a hard drive a bad choice for this type of storage, although it was my first thought and would definitely be the simplest choice - very easy to take out once a month and add files to. DVDs - Way too much of a hassle for both backup and restore. Tape - No idea on the affordability of this option Online - Given that I have at least 300GB already and ever-increasing megapixels means ever-bigger files, and my ISP upload is about 2Mb at the best, this just doesn't sound like a good option for me, but I could be convinced. Other - Have I missed something? Also, I'm already covered both for sync between computers (Dropbox) and a nightly backup of these files (External HDD). The problem with the nightly backup is obviously that it's always with the computer and in a disaster would be destroyed along with it. Is anyone else doing something similar? Is the HDD as poor of a choice as I read, or is it a feasible option? Maybe two to reduce the likelihood of failure?

  Read the article

• Outlook 2007 "Mark as Not Junk" Dialog Confusion

  - by David

  Outlook 2007's "Not Junk" button opens the "Mark as Not Junk" dialog. The dialog works correctly if I keep the "Always trust e-mail from <email address>" option checked. That is, the message is removed from the Junk folder and returns to the Inbox. However, if I uncheck the "Always trust" box, pressing OK dismisses the dialog, but nothing else happens. Why not? According to Outlook help, "When you mark a message as not junk, you are given the option of adding the sender or the mailing list name to your Safe Senders List or Safe Recipients List." That sure makes it sound like this is just an option, and not necessary for the core functionality of the action. I really don't want to trust a (possibly forged) From: address, but I do want my mail back in the Inbox. I could manually drag it, but I'm assuming that marking a message as not junk also trains some kind of bayesian filter. Am I mistaken? Thanks.

  Read the article

• SharePoint 2010 Enterprise wiki - [New page] missing

  - by icelava

  I am trying to ramp up knowledge on SharePoint deployment and usage (never did before), due to a direction to use SharePoint 2010 as a repository platform (wiki format) for our customer's infrastructure documentation. In my test virtual server, a new site of Enterprise wiki template was setup. Went into Site Actions Manage Site Features to activate Wiki Page Home Page. The default sub-web then went from /Pages to /SitePages and looks like the default Team template. The odd thing is the Site Actions is missing the New Page option. My colleague does not understand why this is the case, as it ought to be there. The original /Pages sub-web does have the option. What conditions are in play that influences the appearance of that option? UPDATE Another phenomenon observed is in the Site Actions View All Site Content view, the wiki document libraries listed in the grid will have their hyperlink (e.g. "Site Pages") lead straight to the direct default page. It would not show its own table listing of pages under that document library, unlike the original Pages document library, which expectedly show up as a listing. I wonder if this hints to any problems.

  Read the article

• Pip installs on Archlinux fails to build egg

  - by stmfunk

  I was trying to install nltk on my Archlinux server but it repeatedly fails with the following error output /usr/lib/python3.3/distutils/dist.py:257: UserWarning: Unknown distribution option: 'entry_points' warnings.warn(msg) /usr/lib/python3.3/distutils/dist.py:257: UserWarning: Unknown distribution option: 'zip_safe' warnings.warn(msg) /usr/lib/python3.3/distutils/dist.py:257: UserWarning: Unknown distribution option: 'test_suite' warnings.warn(msg) usage: setup.py [global_opts] cmd1 [cmd1_opts] [cmd2 [cmd2_opts] ...] or: setup.py --help [cmd1 cmd2 ...] or: setup.py --help-commands or: setup.py cmd --help error: invalid command 'bdist_egg' /tmp/pip_build_root/nltk/distribute-0.6.21-py3.3.egg Traceback (most recent call last): File "./distribute_setup.py", line 143, in use_setuptools raise ImportError ImportError During handling of the above exception, another exception occurred: Traceback (most recent call last): File "", line 16, in File "/tmp/pip_build_root/nltk/setup.py", line 23, in distribute_setup.use_setuptools() File "./distribute_setup.py", line 145, in use_setuptools return _do_download(version, download_base, to_dir, download_delay) File "./distribute_setup.py", line 125, in _do_download _build_egg(egg, tarball, to_dir) File "./distribute_setup.py", line 116, in _build_egg raise IOError('Could not build the egg.') OSError: Could not build the egg. ---------------------------------------- Cleaning up... Command python setup.py egg_info failed with error code 1 in /tmp/pip_build_root/nltk Storing complete log in /root/.pip/pip.log This error is also occurring for matplotlib buts thats the only other library I found it to fail on so far. pyyaml installs fine. The install works perfectly under virtualenv on my mac which is using python 2.7 but the server is using python 3.3. Any help is appreciated.

  Read the article

• Most cost efficient way to backup Subversion data to S3?

  - by sludge

  I'm looking at using S3 as an offsite backup repo for my Subversion database. When I dump my SVN database, it's about 10 gigabytes. I would like to avoid the charge of uploading that data repeatedly. The anatomy of this large file such that new changes to Subversion modify the tail of the file, with everything else staying the same. Because Amazon S3 does not allow you to "patch" files with changes, I will have to upload ten gigs every time I instantiate a backup after doing a simple submit to Subversion. Here are the options as I see them: Option 1 I am looking at duplicity which has --volsize which splits data over an amount of megs. Is it possible to split the Subversion dumps using this so further incremental backups are measured in megabytes? Option 2 Can I just backup the hot subversion repository? This seems like a bad idea if it is in the middle of writing a submit. However, I have the option of taking the repo offline between the hours of midnight and 4am. Each revision in my Berkeley DB uses a file as its record.

  Read the article

• Overscan in Catalyst Control Center

  - by alex

  I've connected my PC to my TV via HDMI (I've also tried using DVI). Whatever the resolution (anything from 800 x 600 to 1080p), the image displayed on the TV does not fill the entire screen surface; there's a black border on the edge of the image. This happens in both Vista and Windows 7. After a bit of searching I came to the conclusion it's got something to do with overscan done by the graphics card (ATI 3200HD). It's definitely not the TV because on my old PC there were no such problems. I've searched for the option in Catalyst Control Center 9.9 but it's not available for the TV; if I connect a normal LCD display, the option is there, but only for the LCD screen. If I choose Configure for my TV, where the overscan option should be, it takes me to the Welcome tab in CCC. How can I make the image fill the entire screen? How can I enable/disable overscan for my TV?

  Read the article

• Remote paging with Nagios when network is down and email won't work -- cellular modems and alternatives

  - by Quinten

  What is the best option for remote paging when network services are down? I'm looking for a solution that can let me know when network services are down during off-hours only, and especially when email/smtp services are out. Therefore, it needs to be redundant to our network and power supply. I'm imagining a cellular modem is one option. What's the price range for these? Is anybody using them and feel that they are worth the cost? I'm imagining that it's something we would end up sending an emergency page ~ 1x/month at most, so I'd like the pricing to reflect that--I don't mind a high per-page cost as long as it has a low recurring cost. Another option would be to expose at least one server to remote ping, and run a check script on a remote server. Are there paid options for this? Currently, we run Nagios on a Linux VM on a Windows 2008 Hyper-V host. It would be great if the solution would work in that environment, but I know it's tricky with external devices, and we could move Nagios to a standalone workstation if needed.

  Read the article

• Custom Extensions on Managed Chromebooks

  - by user417669

  I am a developer looking for the best way to set up different schools with their own custom, private extensions (ie School A should be the only one with access to Extension A). Theoretically, I am aware that there are a few ways to get a custom, private extension pushed out on a domain: Host the .crx on a server and click "Specify a Custom App" in the management console. Create a Domain App by uploading a zip to the Chrome Web Store Upload the extension from my developer account to the Chrome Web Store and publish to a single "trusted tester," or make it unlisted Option (1), hosting the .crx, has not been working. I am not sure why, but the extension is simply not pushing out. I link directly to the crx file, which has the right ID and MIME type, still, no dice. If anyone has any tips or suggestions for getting this to work, I would love to hear them! Option (2), having the school create a domain app, seems a bit inefficient because it requires all schools to upload their own zip. So essentially I would have to email a zip file to the school, and have them publish it. All updates to the extension will also require a similar process, so this doesn't seem ideal. I doubt that option (3) would work. If I published to the admin as a "trusted tester", I don't think that the other people in the domain would be able to access it. If it is unlisted, I do not know how an admin could find it in the Chrome Web Store dialog. Also, I would rather avoid security through obscurity. Has anyone had success with hosting the extension and using the Specify a Custom App feature? Any other suggestions for getting a Custom Extension pushed out by the management console? Thanks so much!

  Read the article

• how to set up dual wireless routers (G and N) with single broadband connection

  - by user15973

  A local cafe has an 802.11g wireless router attached to either an 8- or 12Mbs broadband connection. Although many customers still have -g devices, an increasing number are showing up with 802.11n devices (e.g. Mac laptops, iPads). The cafe owner is content with his router's area coverage, but he would like for his customers to be able to take advantage of the higher -n download speeds. He could simply replace the -g router with a -n router, but reportedly -n routers slow down considerably when servicing both -g and -n connections. Another option would be to buy the -n router, run an Ethernet cable between the two routers, and (of course) hook up the broadband connection to one of the two routers. Still another option would be to attach an ordinary, wired switch to the broadband connection and then attach both routers to the switch. Aside from the cost issue, what are the tradeoffs of those approaches? Which would you recommend, and why? Is there a better option than the ones I mentioned? Thank you in advance for your advice.

  Read the article

• diskmgmt.msc: Cannot delete volume from USB

  - by Notinlist

  I have an USB drive with about 8GB of size. It has a single partition of size 169MB. Don't know why, I got it that way. I wanted to delete this small (FAT32) partition and create a single NTFS volume on it. First, I noticed that the "Delete volumme" option is disabled (grayed out). I then tried "Change drive letter and paths..." and removed "F:", that way I made sure that there are no open files on it. The "Delete volume" was still disabled. Then I got suspicious, and right clicked on the "Unallocated" area and I noticed that I did not have any useful option. All "New * volume" items are disabled. I exited from diskmgmt.msc, ran a cmd.exe with administrator privileges, ran the diskmgmt.msc from it, same experiences. Why can't i do anything with this disk? I've read some advices about downloading some alternative free software, but I rather not do it if possible. I still hope that Windows 7 Enterprise 64bit alone can reinitialize an USB drive without external help. I also cannot do anything with my other 8GB pendrive. It's all an NTFS volume, I tried to delete it, but the option is disabled here too. Maybe I have some settings somewhere that prevents my from partitioning USB disks. (I have the freedom to remove my D: partition which is the second - not counding the "System reserved" - on my SSD disk.)

  Read the article

• Limit YouTube to specific videos

  - by Neil Barnwell

  A friend of mine has a son who likes to watch YouTube, but she would like to limit his access with some sort of white-list. This is more strict than simple over-18 stuff. I've thought of a static webpage with embedded video players on, but I don't know how to limit general search access to YouTube.

  Read the article

• Virtualize SBS 2003 - P2V vs migrating to new VM

  - by jlehtinen

  I need to virtualize a SBS 2003 server in my work environment. I need some tips on what people think is the best way to proceed. Background: The SBS 2003 server is the primary DC for the domain and also hosts FTP, RRAS(VPN), DNS, and file shares. Exchange is NOT used, neither is SQL server. DHCP is done via a firewall appliance. I have added a Server 2003 VM to the domain and promoted it to the DC role. AD/DNS is replicating here correctly. This was mainly done to provide fault-tolerance to the domain, I was not intending to make this VM the primary DC. I've already asked about buying upgraded licensing for Server 2008/2012 but was refused due to cost. Options: I see (at least) two routes I could take to complete this. From what I've read option 2 is the "preferred" method, but there's a few steps where I'm not clear on what to expect. Option 1.) P2V the primary DC Power off primary DC Power off secondary DC (to prevent USN rollback in case P2V has issue) P2V (cold clone) primary DC Boot new PDC VM Allow new hardware to detect Remove old NIC hardware from device manager Assign old IPs to new virtual NICs Reboot PDC VM, confirm connectivity and no major issues Power on secondary DC, confirm replication Option 2.) Create new VM, transfer roles, remove original DC from domain Create new VM, install SBS 2003 Do I need the original SBS install discs for this? MS migration doc mentions this. Add VM to domain, promote to DC role Does this start 7 day timer where two SBS servers can be in same domain? Set up RRAS on new VM Set up IIS/FTP on new VM Move file shares to new VM Transfer FSMO roles to new VM DC dcpromo original primary DC out of domain

  Read the article

< Previous Page | 101 102 103 104 105 106 107 108 109 110 111 112  | Next Page >