Search Results

Search found 4282 results on 172 pages for 'social networks'.

Page 105/172 | < Previous Page | 101 102 103 104 105 106 107 108 109 110 111 112  | Next Page >

• Is 50% download speed on a wireless G network normal?

  - by Bartlomiej Skwira

  I have a wired connection of about 36Mb/s, but my wireless speed is max at about 18-19Mb/s. I have a WRT54G-TM (T-Mobile, 802.11G) router with DD-WRT firmware - I've upgraded it to latest build. Done some settings changes: changed channel - 13 wireless network mode - G-only ACK Timing - 0 Fragmentation Threshold and RTS Threshold - 2304 Basic Rate - All Signal/Noise ratio: -46/-94, signal quality ~50-60%. Is this normal with G networks? Edit: The AP is located about 2 meters from laptop, no walls or metal objects, but its next to a TV. I've done a channel scan (had problems locating it, go to "Status - Wireless - Site survey" - lame naming) and everybody else is on channels 1 and 6. Switched to channel 11 but it didn't help. As for trasmit power I got best results with default 71mw. The antenna might be a factor, I'm using the default 2 antennas.

  Read the article

• no driver found error showing while installing windows 7

  - by Shyam s

  I accidentally deleted all my windows 7 drive partitions while installing Ubuntu in my laptop.On booting into ubuntu it is showing 450gb NTFs file partition.30 GB drive linux file system partition. so when i was reinstalling my Os with windows 7.i am not able to view my drives.it is showing drivers not found.I have searched the google followed the steps mentioned in this link. http://social.technet.microsoft.com/Forums/en/w7itproinstall/thread/d460efd3-eac4-4ef8-b95f-b8208b24f44f my laptop is i3 machine and i changed sata to ACHI.still it is showing same error. How can reinstall windows 7. thanks in advance.

  Read the article

• Mac OS X change IP configuration automatically by location (by Wifi network)?

  - by Seppo Sade

  Can Mac OS X be setup to automatically configure its Airport interface with a static IP address when connected to a Wifi network with a certain name, and on all other Wifi networks use DHCP? Currently I'm using the "Locations" feature of the "Network" section in System Preferences to manually switch between two IP address setups. I have a "my static IP" setup, and a default "DHCP" setup. However this requires entering System Preferences to change the Location drop-down each time when switching locations. Can this be automated? Preferably this would be done without third-party software.

  Read the article

• I found two usb sticks on the ground. Now what ?

  - by Stefano Borini

  As from subject. I want to see what's inside. I am seriously interested in finding the owner if possible and returning them, but I am worried it could be an attempt at social engineering. I own a macbook intel with OSX 10.6. It is a very important install. What would you do in my situation if you want to see the content without risks ? Any proposal welcome. Edit: I decided not to plug them in, and I brought them to the hotel reception. They will forward it to the police.

  Read the article

• Computer connects to lan, but not the internet

  - by Jay

  I have a computer with Vista Home that can connect to the router, but it cannot get on the internet. I cannot ping google.com, the request times out. I've tried this on two separate networks and have no trouble with other computers connecting. I've renewed ipconfig, reset winsock, updated the wireless adapter, and the hosts file looks fine. I've tried disabling the firewall as well as a direct wired connection. I did a scan with Norton and it didn't find anything. Is there anything else I can try before resorting to a system restore? Update (Copied from Answer) Windows Update was able to find updates and install them (though, they could have already been downloaded previously). When I pinged Google by using their IP 66.102.9.103, it said it lost 25 percent of the packets. I successfully flushed the DNS but it didn't help. Also, I found safe mode with networking works fine.

  Read the article

• What is a Dynamic way to Connect to a Virtual Machine's Webserver from its Host Machine? [closed]

  - by Jonnybojangles

  As a Web-Developer what is the most efficient (automated) way to connect to a Virtual Machine (VM) running a development webserver from it’s Host Machine (the machine running the VM) when you do not have control over the networks (home, Startbucks, work, etc) you are connected to? Currently I start my VM (a VirtualBox VM running CentOS), run ifconfig to determine the VM’s current IP. I then take that IP and map it my Host machine’s host file so that I can access the VM’s webserver from the Host. I feel that this is not an efficient way to connect to my VM’s webserver because each time I connect to a new network (a few times a day) I need to repeat the IP look up and host file update, and sometimes restart the VM's network service.

  Read the article

• WSUS Updates - Best Practice

  - by What'sTheStoryWishBone

  We have an isolated enviornment of a few hundred servers in which we use WSUS to push updates too. We have thousands of updates which to manage and push to devices testing along the way to ensure the update will not break anything. What are the best practices that you all follow in your enteprise networks to ensure an update does not go out to all the machines that will break something? We currently have ours broken into customized groups for each type of machine. There is one "Test Group" which has one PC of each type which we apply updates to for error checking. Is this a similar procedure others follow or is their an easier safer way to manage the thousands of WSUS updates?

  Read the article

• Personal Browsing Monitor Software [closed]

  - by jmadden93

  Anyone know of any personal browsing monitor software? I'd like to be able to monitor my own browsing habbits and the time I spend on entertainment, vs work vs educational sites. Something that offers more than simply looking at the history feature built into browsers. It would be nice if it gave you a breakdown of how much time you spend on certain categories of sites like social media, vs video, vs. news, productivity, etc. I think it would be useful to know how one spends their time.

  Read the article

• Make user uploads go to different hard drive?

  - by Andrew Fashion

  I am using a pre-made social networking script where all user uploads go to site.com/public/user/ How can I make /public/user/ my secondary hard drive so all user uploads are uploaded to my second harddrive and not the primary hard drive. I have over 100GB of images, and I want them on my other HDD now. Thank you. I am running CentOS 5.5 64bit w/ Apache and PHP I have two 250GB Sata HDDs sudo parted /dev/sda print Model: ATA WDC WD2500KS-00M (scsi) Disk /dev/sda: 250GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 107MB 107MB primary ext3 boot 2 107MB 8595MB 8488MB primary linux-swap 3 8595MB 10.7GB 2147MB primary ext3 4 10.7GB 250GB 239GB extended 5 10.7GB 250GB 239GB logical ext3 Information: Don't forget to update /etc/fstab, if necessary. 5 10.7GB 250GB 239GB logical ext3

  Read the article

• Personally identifiable information (PII) on shared web hosting

  - by S. Cobbs

  Hey folks, I am providing web hosting services (shared and dedicated) and have had one of my shared hosting clients mention needing an SSL cert for their site where they are collecting insurance quotes in a form, including names and social security numbers. My privacy sense is tingling, and I'm pretty sure it's not legal (in the US) to do this on a shared system, but can't find anything to support my thoughts outside of PCI-DSS, but the customer isn't processing payments through the site so I'm not sure if that applies. I'm reading lots of policy documents where people advise to minimize and manage the PII footprint internally, but as the host I don't want to put all of my customer's clients at possible risk. I'm not looking here for legal advice necessarily, but perhaps someone in a similar position to mine can provide some rule of thumb or point me in the right direction.

  Read the article

• What is your approach to draw a representation of your network ?

  - by Kartoch

  Hello, I'm looking to the community to see how people are drawing their networks, i.e. using symbols to represent complex topology. You can have hardware approach, where every hardware unit are represented. You can also have "entity" approach, where each "service" is shown. Both are interesting but it is difficult to have both on the same schema (but this is needed, especially using virtualization environment). Furthermore, it is difficult to have complex informations on such representation. For instance security parameters (encrypted link, need for authentication) or specific details (protocol type, ports, encapsulation). So my question is: where your are drawing a representation of your network, what is your approach ? Are you using methodology and/or specific softwares ? What is your recommendations for information to put (or not) ? How to deal with the complexity when the network becomes large and/or you want to put a lot of information on it ? Examples and links to good references will be appreciated.

  Read the article

• Intercepting LAN network traffic via WiFi

  - by user1613655

  Let's get straight to the point. This is my fictive network architecture: My question is: Would it be possible for Laptop B to intercept traffic sent and received by Laptop A? Please note that B only has WiFi access and no physical control over Router B. Furthermore, Router A and B create different wireless networks with different encryption keys. If both shared the same wireless network or Laptop B had LAN-access to Router B, the answer would be trivial, but I'm not sure how the answer turns out in this scenario :-/ Thanks for your valuable help!

  Read the article

• Solution to: Hotmail Senders receiving NDR : “550-Please turn on SMTP Authentication in your mail client…”

  - by Tony Yustein

  Original question is here original question I can not answer to that question because the system requires me to have 10 credits, very nice.... This error is based mostly on mobile devices, mostly on iPhones and mostly on mobile networks. This is how much I have narrowed it to. I believe: Hotmail checks where your are connecting from If it is a mobile network it requires additional security for sending messages but the default iPhone config does not have this option for hotmail if the user creates the hotmail account on the iPhone with SMTP AUTH enabled manually it might solve the situation Cheers, Tony

  Read the article

• two shops network

  - by edward

  okay so, I just opened up two shops in my hometown. The two stores is about 6 blocks apart, connecting them by wire is not really feasible in cost wise. What kind of network topology should I use for my small shops, there will be 5 computers, one is the sales computer ,another 4 as mentioned is the guest computer. I want the sales and guest computers network to be seperated. Both shops have same computers. The guest computers serves up simple website that has my shop catalog on it, I'm thinking of using a web server. So, how am i suppose to setup these networks, im planning to add in more computers in the future. Is it I need to station a single server at a shop, and all the computer connected to it? or is there any more effective methods? I'm no networking expert, would love to hear some advice.

  Read the article

• How can I tell if a host is bridged and acting as a router

  - by makerofthings7

  I would like to scan my DMZ for hosts that are bridged between subnets and have routing enabled. Since I have everything from VMWare servers, to load balancers on the DMZ I'm unsure if every host is configured correctly. What IP, ICMP, or SNMP (etc) tricks can I use to poll the hosts and determine if the host is acting as a router? I'm assuming this test would presume I know the target IP, but in a large network with many subnets, I'd have to test many different combinations of networks and see if I get success. Here is one example (ping): For each IP in the DMZ, arp for the host MAC Send a ICMP reply message to that host directed at an online host on each subnet I think that there is a more optimal way to get the information, namely from within ICMP/IP itself, but I'm not sure what low level bits to look for. I would also be interested if it's possible to determine the "router" status without knowing the subnets that the host may be connected to. This would be useful to know when improving our security posture.

  Read the article

• Memcached clustered alternative

  - by Johan Kooijman

  I'm looking to replace memcached. We have a LOT of traffic to our central memcached node which I'd like to split. There's only so much trunking networks I can do. My general idea is to install a memcached-type daemon on every webserver and have the daemons replicate set/delete/updates over all the daemons, so that each webserver connects to a socket or on localhost. All data should be available on all nodes. The alternatives: - repcached (max 2 masters) - redis (single master) - couchdb/mongodb/handlersocket - persistent data on disk, I'd like to remove the disk part to gain more performance. Any hints?

  Read the article

• Error when starting Outlook 2007 on Windows 7

  - by Jared

  Every time I start Outlook 2007 SP2 on my Windows 7 box Outlook will look like its loading fine, then I get this error message: cannot start microsoft office outlook. cannot open the outlook window and outlook will close. I was able to get outlook to start by using outlook.exe /resetnavpane in the Start-Search box, a nice tip which I got from this social.microsoft.com page. But it didn't fix the problem since outlook is still complaining when it starts after a reboot. What can I do to get outlook to startup normally?

  Read the article

• What are the methods of separating network spaces in a LAN?

  - by dash17291

  Please detail me the methods. My thoughts: put the servers in separate (sub)networks the servers are forced to go through the firewall but no NAT is required assign more IP addresses to the internal interface of the server choosing gateway addresses from the clients and servers IP address ranges split DNS Netfilter/{iptables, ipset} could be heavily involved, I'm talking about Linux servers. See for example: Destination NAT Onto the Same Network from internal clients Please do not explain what is NAT or DNS. This is a theoretical question, but my poor English knowledge prevent me to describe it in a fancy fashion.

  Read the article

• Isolated Network Set-Up

  - by Isaac Kleinman

  I am looking to set up a small network for a client which would be isolated from his primary network. (I'm hoping to set-up the additional network as VMs on the primary network.) I've instructed the client to request a bunch of static ip addresses from his ISP, but I'm not sure how to proceed with setting this up. What hardware will I need and how do I go about the configuration? Heavy security is not my concern. All that's really required is that web requests from the two networks be presented to the outside world with different ip addresses.

  Read the article

• ASUS WL-500gP v2 network between two local machines

  - by Epsiloncool

  I have two windows XP machines in my home networks, connected with ASUS WL-500gp V2 which also used as internet router. Problem is: while I have both computers normally goes to internet (used DHCP, static routes is ON, routing table is empty, operation mode is Home Gateway). I see both computers listed on the Network Neighborhood on 1st computer (wired to router), can enter to my own computer, but can not enter to other. I see only one computer (2nd) on the Network Neighborhood on 2nd computer (connected thru Wi-Fi), can enter to itself, getting error when trying to enter 1st computer address in address line (like \My1stComp). What is the problem? I totally crazy founding problem about 3 months.

  Read the article

• Windows 7 Mapped Network Drive Multiplying to Create Duplicates all the way to Z:

  - by bendiy

  A strange issue came in today from some users. At least two Windows 7 x64 boxes that have duplicate mappings of a network drive. The drive is not mapped with a log in script, but done manual through "Map Network Drive". Everything has been fine for months, but all of the sudden, Explorer looks like this: Files (\\fileServerPath) (S:) Files (\\fileServerPath) (T:) Files (\\fileServerPath) (U:) Files (\\fileServerPath) (V:) Files (\\otherServerPath) (W:) Files (\\fileServerPath) (X:) Files (\\fileServerPath) (Y:) Files (\\fileServerPath) (Z:) There are some other networks drives mixed in there that did not duplicate. The drive is normally mapped to S:\, but it decided to make its way to Z:. What is going on here? I've found this and will be trying soon: http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/b5647cc3-15d0-4776-bb00-a869bd8f930b

  Read the article

• What are the pros & cons of these MySQL engines for OLTP -- XtraDB, PBXT, or TokuDB?

  - by Continuation

  I'm working on a social website with an approximate read/write split of 90/10. Trying to decide on a MySQL engine. The ones I'm interested in are: XtraDB PBXT TokuDB What are the pros and cons of them for my use case? A few specific questions: PBXT uses log-based structure that avoids double-writes. It sounds very elegant, but the benchmark I've seen doesn't show any/much advantages over XtraDB. Do you have any experience with PBXT/XtraDB you can share? TokuDB sounds VERY interesting. But all the benchmarks I've seen are about single-threaded bulk inserts - inserting 100M rows for example. that's not very relevant for OLTP. What about its performance with large number of concurrent threads writing and reading at the same time? Anyone has tried that?

  Read the article

• Prompt for credentials in a batch script

  - by Inteladu

  I am trying to perform a network copy of files via a batch script. However, as usual there are some networks where the 'copy' command fails saying 'Bad username or password'. And when I try using xcopy, it never works. I have also tried using, net use \\server\ password /user:domain\username net use \\server\ipc$ /user:domain\username password But none of these work. Any ideas on how I can accomplish this? I was also wondering if it is possible to prompt the ususal Windows login dialog for this...(just an idea) Any leads on this would be highly appreciated. Thanks & Regards, inteladu

  Read the article

• What is an Automated way to Access a Virtual Machine's Webserver from its Host Machine? [closed]

  - by Jonnybojangles

  As a Web-Developer what is the most efficient (automated) way to connect to a Virtual Machine (VM) running a development webserver from it’s Host Machine (the machine running the VM) when you do not have control over the networks (home, Startbucks, work, etc) you are connected to? Currently I start my VM (a VirtualBox VM running CentOS), run ifconfig to determine the VM’s current IP. I then take that IP and map it my Host machine’s host file so that I can access the VM’s webserver from the Host. I feel that this is not an efficient way to connect to my VM’s webserver because each time I connect to a new network (a few times a day) I need to repeat the IP look up and host file update, and sometimes restart the VM's network service.

  Read the article

• How can I uninstall Facebook Messenger for Firefox?

  - by BennyMcBenBen

  I have Firefox beta installed and when I visited Facebook the other day I turned on Messenger for Firefox. I tried it and I think I'll pass. However, I do not see any way to uninstall it. I skimmed through Firefox Options and returned to the Facebook "Turn On" page, but I do not see a Turn Off button anywhere. I can't even hide the Facebook buttons added to my navigation toolbar by dragging them into the Customize Toolbar window. The Mozilla article announcing the Social API claims "It’s just as easy to remove", but offers no instructions on how to do so. How can I turn off or uninstall Facebook Messenger for Firefox?

  Read the article

< Previous Page | 101 102 103 104 105 106 107 108 109 110 111 112  | Next Page >