Search Results

Search found 6090 results on 244 pages for 'digest authentication'.

Page 106/244 | < Previous Page | 102 103 104 105 106 107 108 109 110 111 112 113  | Next Page >

• how can I restrict access to all files in a folder without web.config

  - by netNewbi3

  Hi I need to restric access to my admin folder to certain people. Those with no authentication ticket should be redirectered to a "not allowed page". How do I identify all pages in my admin folder. I have so far but is it OK? If url.Contains("/admin") Then 'If authentication ticket incorrect then `Response.Redirect("~/notallowed_admin.aspx")` End If And not, I cannot use my web.config for this particular issue. Many thanks

  Read the article

• How can I forward ALL traffic over a site-to-site VPN on Cisco ASA?

  - by Scott Clements

  Hi There, I currently have two Cisco ASA 5100 routers. They are at different physical sites and are configured with a site-to-site VPN which is active and working. I can communicate with the subnets on either site from the other and both are connected to the internet, however I need to ensure that all the traffic at my remote site goes through this VPN to my site here. I know that the web traffic is doing so as a "tracert" confirms this, but I need to ensure that all other network traffic is being directed over this VPN to my network here. Here is my config for the ASA router at my remote site: hostname ciscoasa domain-name xxxxx enable password 78rl4MkMED8xiJ3g encrypted names ! interface Ethernet0/0 nameif NIACEDC security-level 100 ip address x.x.x.x 255.255.255.0 ! interface Ethernet0/1 description External Janet Connection nameif JANET security-level 0 ip address x.x.x.x 255.255.255.248 ! interface Ethernet0/2 shutdown no nameif security-level 100 no ip address ! interface Ethernet0/3 shutdown no nameif security-level 100 ip address dhcp setroute ! interface Management0/0 nameif management security-level 100 ip address 192.168.100.1 255.255.255.0 management-only ! passwd 2KFQnbNIdI.2KYOU encrypted ftp mode passive clock timezone GMT/BST 0 clock summer-time GMT/BDT recurring last Sun Mar 1:00 last Sun Oct 2:00 dns domain-lookup NIACEDC dns server-group DefaultDNS name-server 154.32.105.18 name-server 154.32.107.18 domain-name XXXX same-security-traffic permit inter-interface same-security-traffic permit intra-interface access-list ren_access_in extended permit ip any any access-list ren_access_in extended permit tcp any any access-list ren_nat0_outbound extended permit ip 192.168.6.0 255.255.255.0 192.168.3.0 255.255.255.0 access-list NIACEDC_nat0_outbound extended permit ip 192.168.12.0 255.255.255.0 192.168.3.0 255.255.255.0 access-list JANET_20_cryptomap extended permit ip 192.168.12.0 255.255.255.0 192.168.3.0 255.255.255.0 access-list NIACEDC_access_in extended permit ip any any access-list NIACEDC_access_in extended permit tcp any any access-list JANET_access_out extended permit ip any any access-list NIACEDC_access_out extended permit ip any any pager lines 24 logging enable logging asdm informational mtu NIACEDC 1500 mtu JANET 1500 mtu management 1500 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-522.bin no asdm history enable arp timeout 14400 nat-control global (NIACEDC) 1 interface global (JANET) 1 interface nat (NIACEDC) 0 access-list NIACEDC_nat0_outbound nat (NIACEDC) 1 192.168.12.0 255.255.255.0 access-group NIACEDC_access_in in interface NIACEDC access-group NIACEDC_access_out out interface NIACEDC access-group JANET_access_out out interface JANET route JANET 0.0.0.0 0.0.0.0 194.82.121.82 1 route JANET 0.0.0.0 0.0.0.0 192.168.3.248 tunneled timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout uauth 0:05:00 absolute http server enable http 192.168.12.0 255.255.255.0 NIACEDC http 192.168.100.0 255.255.255.0 management http 192.168.9.0 255.255.255.0 NIACEDC no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto map JANET_map 20 match address JANET_20_cryptomap crypto map JANET_map 20 set pfs crypto map JANET_map 20 set peer X.X.X.X crypto map JANET_map 20 set transform-set ESP-AES-256-SHA crypto map JANET_map interface JANET crypto isakmp enable JANET crypto isakmp policy 10 authentication pre-share encryption aes-256 hash sha group 2 lifetime 86400 crypto isakmp policy 30 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 50 authentication pre-share encryption aes-256 hash sha group 5 lifetime 86400 tunnel-group X.X.X.X type ipsec-l2l tunnel-group X.X.X.X ipsec-attributes pre-shared-key * telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd address 192.168.100.2-192.168.100.254 management dhcpd enable management ! ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect http ! service-policy global_policy global prompt hostname context no asdm history enable Thanks in advance, Scott

  Read the article

• Postfix certificate verification failed for smtp.gmail.com

  - by Andi Unpam

  I have problem, my email server using postfix with gmail smtp, i use account google apps, but always ask for SASL authentication failed, I sent an email using php script, after I see the error logs in the wrong password, after I open the URL from the browser and no verification postfixnya captcha and could return, but after 2-3 days later happen like that again. This my config postfix #myorigin = /etc/mailname smtpd_banner = Hostingbitnet Mail Server biff = no append_dot_mydomain = no readme_directory = no myhostname = webmaster.hostingbitnet.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = localhost, webmaster.hostingbitnet.com, localhost.localdomain, 103.9.126.163 relayhost = [smtp.googlemail.com]:587 relay_transport = relay relay_destination_concurrency_limit = 1 mynetworks = 127.0.0.0/8, 192.168.0.0/16, 172.16.0.0/16, 10.0.0.0/8, 103.9.126.0/24 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all default_transport = smtp relayhost = [smtp.gmail.com]:587 smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/google-apps smtp_sasl_security_options = noanonymous smtp_use_tls = yes smtp_sender_dependent_authentication = yes tls_random_source = dev:/dev/urandom default_destination_concurrency_limit = 1 smtp_tls_CAfile = /etc/postfix/tls/root.crt smtp_tls_cert_file = /etc/postfix/tls/cert.pem smtp_tls_key_file = /etc/postfix/tls/privatekey.pem smtp_tls_session_cache_database = btree:$data_directory/smtp_tls_session_cache smtp_tls_security_level = may smtp_tls_loglevel = 1 smtpd_tls_CAfile = /etc/postfix/tls/root.crt smtpd_tls_cert_file = /etc/postfix/tls/cert.pem smtpd_tls_key_file = /etc/postfix/tls/privatekey.pem smtpd_tls_session_cache_database = btree:$data_directory/smtpd_tls_session_cache smtpd_tls_security_level = may smtpd_tls_loglevel = 1 #secure smtpd_recipient_restrictions = permit_mynetworks,permit_sasl_authenticated,check_client_access hash:/var/lib/pop-before-smtp/hosts,reject_unauth_destination Log from mail.log Oct 30 14:51:13 webmaster postfix/smtp[9506]: Untrusted TLS connection established to smtp.gmail.com[74.125.25.109]:587: TLSv1 with cipher RC4-SHA (128/128 bits) Oct 30 14:51:15 webmaster postfix/smtp[9506]: 87E2739400B1: SASL authentication failed; server smtp.gmail.com[74.125.25.109] said: 535-5.7.1 Please log in with your web browser and then try again. Learn more at?535 5.7.1 https://support.google.com/mail/bin/answer.py?answer=78754 ix9sm156630pbc.7 Oct 30 14:51:15 webmaster postfix/smtp[9506]: setting up TLS connection to smtp.gmail.com[74.125.25.108]:587 Oct 30 14:51:15 webmaster postfix/smtp[9506]: certificate verification failed for smtp.gmail.com[74.125.25.108]:587: untrusted issuer /C=US/O=Equifax/OU=Equifax Secure Certificate Authority Oct 30 14:51:16 webmaster postfix/smtp[9506]: Untrusted TLS connection established to smtp.gmail.com[74.125.25.108]:587: TLSv1 with cipher RC4-SHA (128/128 bits) Oct 30 14:51:17 webmaster postfix/smtp[9506]: 87E2739400B1: to=<[email protected]>, relay=smtp.gmail.com[74.125.25.108]:587, delay=972, delays=967/0.03/5.5/0, dsn=4.7.1, status=deferred (SASL authentication failed; server smtp.gmail.com[74.125.25.108] said: 535-5.7.1 Please log in with your web browser and then try again. Learn more at?535 5.7.1 https://support.google.com/mail/bin/answer.py?answer=78754 s1sm3850paz.0) Oct 30 14:51:17 webmaster postfix/error[9508]: B3960394009D: to=<[email protected]>, orig_to=<root>, relay=none, delay=29992, delays=29986/5.6/0/0.07, dsn=4.7.1, status=deferred (delivery temporarily suspended: SASL authentication failed; server smtp.gmail.com[74.125.25.108] said: 535-5.7.1 Please log in with your web browser and then try again. Learn more at?535 5.7.1 https://support.google.com/mail/bin/answer.py?answer=78754 s1sm3850paz.0) BTW I made cert follow the link here http://koti.kapsi.fi/ptk/postfix/postfix-tls-cacert.shtml and it worked, but after 2/3 days my email back to problem invalid SASL, and then i'm required to log in use a browser and enter the captcha there but success log in after input captcha, and my email server can send emails from telnet or php script. but it will be back in trouble after 2/3days later. My question is how to make it permanent certificate? Thanks n greeting.

  Read the article

• Troubleshooting sudoers via ldap

  - by dafydd

  The good news is that I got sudoers via ldap working on Red Hat Directory Server. The package is sudo-1.7.2p1. I have some LDAP/Kerberos users in an LDAP group called wheel, and I have this entry in LDAP: # %wheel, SUDOers, example.com dn: cn=%wheel,ou=SUDOers,dc=example,dc=com cn: %wheel description: Members of group wheel have access to all privileges. objectClass: sudoRole objectClass: top sudoCommand: ALL sudoHost: ALL sudoUser: %wheel So, members of group wheel have administrative privileges via sudo. This has been tested and works fine. Now, I have this other sudo privilege set up to allow members of a group called Administrators to perform two commands as the non-root owner of those commands. # %Administrators, SUDOers, example.com dn: cn=%Administrators,ou=SUDOers,dc=example,dc=com sudoRunAsGroup: appGroup sudoRunAsUser: appOwner cn: %Administrators description: Allow members of the group Administrators to run various commands . objectClass: sudoRole objectClass: top sudoCommand: appStop sudoCommand: appStart sudoCommand: /path/to/appStop sudoCommand: /path/to/appStart sudoUser: %Administrators Unfortunately, members of Administrators are still refused permission to run appStart or appStop: -bash-3.2$ sudo /path/to/appStop [sudo] password for Aaron: Sorry, user Aaron is not allowed to execute '/path/to/appStop' as root on host.example.com. -bash-3.2$ sudo -u appOwner /path/to/appStop [sudo] password for Aaron: Sorry, user Aaron is not allowed to execute '/path/to/appStop' as appOwner on host.example.com. /var/log/secure shows me these two sets of messages for the two attempts: Oct 31 15:02:36 host sudo: pam_unix(sudo:auth): authentication failure; logname=Aaron uid=0 euid=0 tty=/dev/pts/3 ruser= rhost= user=Aaron Oct 31 15:02:37 host sudo: pam_krb5[1508]: TGT verified using key for 'host/[email protected]' Oct 31 15:02:37 host sudo: pam_krb5[1508]: authentication succeeds for 'Aaron' ([email protected]) Oct 31 15:02:37 host sudo: Aaron : command not allowed ; TTY=pts/3 ; PWD=/auto/home/Aaron ; USER=root ; COMMAND=/path/to/appStop Oct 31 15:02:52 host sudo: pam_unix(sudo:auth): authentication failure; logname=Aaron uid=0 euid=0 tty=/dev/pts/3 ruser= rhost= user=Aaron Oct 31 15:02:52 host sudo: pam_krb5[1547]: TGT verified using key for 'host/[email protected]' Oct 31 15:02:52 host sudo: pam_krb5[1547]: authentication succeeds for 'Aaron' ([email protected]) Oct 31 15:02:52 host sudo: Aaron : command not allowed ; TTY=pts/3 ; PWD=/auto/home/Aaron ; USER=appOwner; COMMAND=/path/to/appStop The questions: Does sudo have some sort of verbose or debug mode where I can actually watch it capture the sudoers privilege list and determine whether or not Aaron should have the privilege to run this command? (This question is probably independent of where the sudoers database is kept.) Does sudo work with some background mechanism that might have a log level I could turn up? Right now, I can't fix a problem I can't identify. Is this an LDAP search failure? Is this a group member matching failure? Identifying why the command fails will help me identify the fix... Next step: Recreate the privilege in /etc/sudoers, and see if it works locally... Cheers!

  Read the article

• ASA 5505 stops local internet when connected to VPN

  - by g18c

  Hi I have a Cisco ASA router running firmware 8.2(5) which hosts an internal LAN on 192.168.30.0/24. I have used the VPN Wizard to setup L2TP access and I can connect in fine from a Windows box and can ping hosts behind the VPN router. However, when connected to the VPN I can no longer ping out to my internet or browse web pages. I would like to be able to access the VPN, and also browse the internet at the same time - I understand this is called split tunneling (have ticked the setting in the wizard but to no effect) and if so how do I do this? Alternatively, if split tunneling is a pain to setup, then making the connected VPN client have internet access from the ASA WAN IP would be OK. Thanks, Chris names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.30.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address 208.74.158.58 255.255.255.252 ! ftp mode passive access-list inside_nat0_outbound extended permit ip any 10.10.10.0 255.255.255.128 access-list inside_nat0_outbound extended permit ip 192.168.30.0 255.255.255.0 192.168.30.192 255.255.255.192 access-list DefaultRAGroup_splitTunnelAcl standard permit 192.168.30.0 255.255.255.0 access-list DefaultRAGroup_splitTunnelAcl_1 standard permit 192.168.30.0 255.255.255.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool LANVPNPOOL 192.168.30.220-192.168.30.249 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 192.168.30.0 255.255.255.0 route outside 0.0.0.0 0.0.0.0 208.74.158.57 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 192.168.30.0 255.255.255.0 inside snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 TRANS_ESP_3DES_SHA crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.30.3 vpn-tunnel-protocol l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value DefaultRAGroup_splitTunnelAcl_1 username user password Cj7W5X7wERleAewO8ENYtg== nt-encrypted privilege 0 tunnel-group DefaultRAGroup general-attributes address-pool LANVPNPOOL default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key ***** tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global prompt hostname context : end

  Read the article

• got VPN l2l connect between a site & HQ but not traffice using ASA5505 on both ends

  - by vinlata

  Hi, Could anyone see what did I do wrong here? this is one configuration of site1 to HQ on ASA5505, I can get connected but seems like no traffic going (allowed) between them, could it be a NAT issue? any helps would much be appreciated Thanks interface Vlan1 nameif inside security-level 100 ip address 172.30.205.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address pppoe setroute ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 shutdown ! interface Ethernet0/3 shutdown ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 shutdown ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! passwd .dIuXDIYzD6RSHz7 encrypted ftp mode passive dns server-group DefaultDNS domain-name errg.net object-group network HQ network-object 172.22.0.0 255.255.0.0 network-object 172.22.0.0 255.255.128.0 network-object 172.22.0.0 255.255.255.128 network-object 172.22.1.0 255.255.255.128 network-object 172.22.1.0 255.255.255.0 access-list inside_access_in extended permit ip any any access-list outside_access_in extended permit icmp any any echo-reply access-list outside_20_cryptomap extended permit ip 172.30.205.0 255.255.255.0 o bject-group HQ access-list inside_nat0_outbound extended permit ip 172.30.205.0 255.255.255.0 o bject-group HQ access-list policy-nat extended permit ip 172.30.205.0 255.255.255.0 172.22.0.0 255.255.0.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 nat-control global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) 172.30.205.0 access-list policy-nat access-group inside_access_in in interface inside access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout uauth 0:05:00 absolute username errgadmin password Os98gTdF8BZ0X2Px encrypted privilege 15 http server enable http 64.42.2.224 255.255.255.240 outside http 172.22.0.0 255.255.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto map outside_map 190 match address outside_20_cryptomap crypto map outside_map 190 set pfs crypto map outside_map 190 set peer 66.7.249.109 crypto map outside_map 190 set transform-set ESP-3DES-SHA crypto map outside_map 190 set phase1-mode aggressive crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 30 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 65535 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp nat-traversal 190 crypto isakmp ipsec-over-tcp port 10000 tunnel-group 66.7.249.109 type ipsec-l2l tunnel-group 66.7.249.109 ipsec-attributes pre-shared-key * telnet timeout 5 ssh 172.30.205.0 255.255.255.0 inside ssh 172.22.0.0 255.255.0.0 outside ssh 64.42.2.224 255.255.255.240 outside ssh 172.25.0.0 255.255.128.0 outside ssh timeout 5 console timeout 0 management-access inside vpdn group PPPoEx request dialout pppoe vpdn group PPPoEx localname [email protected] vpdn group PPPoEx ppp authentication pap vpdn username [email protected] password ********* dhcpd address 172.30.205.100-172.30.205.131 inside dhcpd dns 172.22.0.133 68.94.156.1 interface inside dhcpd wins 172.22.0.133 interface inside dhcpd domain errg.net interface inside dhcpd enable inside ! ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect netbios inspect rsh inspect rtsp inspect skinny inspect esmtp inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp ! end

  Read the article

• Cannot SSH after resetting firewall on VPS

  - by Thomas Buckley

  I'm having trouble trying to SSH to my Debian 5 VPS with blacknight. It was working fine until I did the following: Logged into 'Parallels Infrastructure Manager' - Container - Firewall - Set to 'Normal Firewall settings'. It told me there was an error with the IPTables and offered the option again with a checkbox to 'reset' firewall settings, I selected this. I can see that that the default rules are been applied ( anything from anyone on any port and allowing anything to happen). Whenever I attempt to SSH I get the following debug info: thomas@localmachine:~/.ssh$ ssh -v thomas@hostname OpenSSH_5.8p1 Debian-7ubuntu1, OpenSSL 1.0.0e 6 Sep 2011 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to hostname [***********] port 22. debug1: Connection established. debug1: identity file /home/thomas/.ssh/id_rsa type 1 debug1: Checking blacklist file /usr/share/ssh/blacklist.RSA-4096 debug1: Checking blacklist file /etc/ssh/blacklist.RSA-4096 debug1: identity file /home/thomas/.ssh/id_rsa-cert type -1 debug1: identity file /home/thomas/.ssh/id_dsa type -1 debug1: identity file /home/thomas/.ssh/id_dsa-cert type -1 debug1: identity file /home/thomas/.ssh/id_ecdsa type -1 debug1: identity file /home/thomas/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1p1 Debian-5 debug1: match: OpenSSH_5.1p1 Debian-5 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8p1 Debian-7ubuntu1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA ************************************* debug1: Host 'hostname' is known and matches the RSA host key. debug1: Found key in /home/thomas/.ssh/known_hosts:2 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/thomas/.ssh/id_rsa debug1: Authentications that can continue: publickey debug1: Trying private key: /home/thomas/.ssh/id_dsa debug1: Trying private key: /home/thomas/.ssh/id_ecdsa debug1: No more authentication methods to try. Permission denied (publickey). I had my public/private RSA keys set up and working fine before I reset the firewall settings. I had also made the following changes to my /etc/ssh/sshd_config file on the VPS: PermitRootLogin no PasswordAuthentication no X11Forwarding no UsePAM no UseDNS no AllowUsers thomas Could it be something to do with the SSH server & client having different versions between my local machine and VPS? Any help appreciated. Output with ssh -vvv thomas@localcomputer:~/.ssh$ ssh -vvv thomas@**************** OpenSSH_5.8p1 Debian-7ubuntu1, OpenSSL 1.0.0e 6 Sep 2011 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to ************ [*************] port 22. debug1: Connection established. debug3: Incorrect RSA1 identifier debug3: Could not load "/home/thomas/.ssh/id_rsa" as a RSA1 public key debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug2: key_type_from_name: unknown key type 'Proc-Type:' debug3: key_read: missing keytype debug2: key_type_from_name: unknown key type 'DEK-Info:' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /home/thomas/.ssh/id_rsa type 1 debug1: Checking blacklist file /usr/share/ssh/blacklist.RSA-4096 debug1: Checking blacklist file /etc/ssh/blacklist.RSA-4096 debug1: identity file /home/thomas/.ssh/id_rsa-cert type -1 debug1: identity file /home/thomas/.ssh/id_dsa type -1 debug1: identity file /home/thomas/.ssh/id_dsa-cert type -1 debug1: identity file /home/thomas/.ssh/id_ecdsa type -1 debug1: identity file /home/thomas/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1p1 Debian-5 debug1: match: OpenSSH_5.1p1 Debian-5 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8p1 Debian-7ubuntu1 debug2: fd 3 setting O_NONBLOCK debug3: load_hostkeys: loading entries for host "*****************" from file "/home/thomas/.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /home/thomas/.ssh/known_hosts:1 debug3: load_hostkeys: loaded 1 keys debug3: order_hostkeyalgs: prefer hostkeyalgs: [email protected],[email protected],ssh-rsa debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: [email protected],[email protected],ssh-rsa,[email protected],[email protected],[email protected],[email protected],[email protected],ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 127/256 debug2: bits set: 498/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA *********************************************************** debug3: load_hostkeys: loading entries for host "*********************" from file "/home/thomas/.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /home/thomas/.ssh/known_hosts:1 debug3: load_hostkeys: loaded 1 keys debug1: Host '****************' is known and matches the RSA host key. debug1: Found key in /home/thomas/.ssh/known_hosts:1 debug2: bits set: 516/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/thomas/.ssh/id_rsa (0x7fa7028b6010) debug2: key: /home/thomas/.ssh/id_dsa ((nil)) debug2: key: /home/thomas/.ssh/id_ecdsa ((nil)) debug1: Authentications that can continue: publickey debug3: start over, passed a different list publickey debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/thomas/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey debug1: Trying private key: /home/thomas/.ssh/id_dsa debug3: no such identity: /home/thomas/.ssh/id_dsa debug1: Trying private key: /home/thomas/.ssh/id_ecdsa debug3: no such identity: /home/thomas/.ssh/id_ecdsa debug2: we did not send a packet, disable method debug1: No more authentication methods to try. Permission denied (publickey). sshd_config # Package generated configuration file # See the sshd(8) manpage for details # What ports, IPs and protocols we listen for Port 22 # Use these options to restrict which interfaces/protocols sshd will bind to #ListenAddress :: #ListenAddress 0.0.0.0 Protocol 2 # HostKeys for protocol version 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key #Privilege Separation is turned on for security UsePrivilegeSeparation yes # Lifetime and size of ephemeral version 1 server key KeyRegenerationInterval 3600 ServerKeyBits 768 # Logging SyslogFacility AUTH LogLevel INFO # Authentication: LoginGraceTime 120 PermitRootLogin no StrictModes yes RSAAuthentication yes PubkeyAuthentication yes #AuthorizedKeysFile %h/.ssh/authorized_keys # Don't read the user's ~/.rhosts and ~/.shosts files IgnoreRhosts yes # For this to work you will also need host keys in /etc/ssh_known_hosts RhostsRSAAuthentication no # similar for protocol version 2 HostbasedAuthentication no # Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication #IgnoreUserKnownHosts yes # To enable empty passwords, change to yes (NOT RECOMMENDED) PermitEmptyPasswords no # Change to yes to enable challenge-response passwords (beware issues with # some PAM modules and threads) C hallengeResponseAuthentication no # Change to no to disable tunnelled clear text passwords PasswordAuthentication no # Kerberos options #KerberosAuthentication no #KerberosGetAFSToken no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes X11Forwarding no X11DisplayOffset 10 PrintMotd no PrintLastLog yes TCPKeepAlive yes #UseLogin no #MaxStartups 10:30:60 #Banner /etc/issue.net # Allow client to pass locale environment variables AcceptEnv LANG LC_* Subsystem sftp /usr/lib/openssh/sftp-server UsePAM no UseDNS no AllowUsers thomas Thanks

  Read the article

• SQL Server 08 Express error when connecting to localhost - "Timeout expired". Works with ::1 or 127

  - by Adam A

  EDIT New info: Navigating to localhost:1434 in Chrome gives me an "ERR_EMPTY_RESPONSE", while other ports give me an "Oops! This link appears to be broken". So it seems to binding ok there? So here's my setup so far: I've configured Windows Firewall to allow TCP on 1433 and UDP on 1434. I've set up SQL Server to use any IP on Port 1433 (using the SQL Server Configuration Manager). My hosts file contains the default entries ("127.0.0.1 localhost" and "::1 localhost"). I sometimes have a debug session of Visual Web Developer running a webserver, but it's on a specific port (localhost:5XXXX). What I've tried: I CAN ping localhost in a cmd prompt. I CAN connect to the database through SSMS if I specify 127.0.0.1 or ::1 as the server name. I CAN'T connect to the database through SSMS (or ADO.NET) if I specify localhost as the server name. I've tried both Windows and SQL Authentication The error I get is the standard Can't connect to localhost. Additional Information -- Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. (Microsoft Sql Server) Other considerations: Stopping the Visual Web Developer web server from the taskbar doesn't affect the sql problem. The SQL error log says that it's listening on some piped name url at start up (I don't see how this would affect localhost but not 127.0.0.1 though). I could probably just use 127.0.0.1 everywhere, but it scares me that localhost isn't working and I'd like to figure out why. I'm not much of a networking or sql server guy so I'm stuck. If you want me to try anything to help diagnose just put it in a comment and I'll give it a go. Netstat results: Setting SDK environment relative to C:\Program Files\Microsoft SDKs\Windows\v6.1 Targeting Windows Server 2008 x86 DEBUG C:\Program Files\Microsoft SDKs\Windows\v6.1netstat -ano | findstr 1434 UDP 0.0.0.0:1434 *:* 6868 UDP [::]:1434 *:* 6868 C:\Program Files\Microsoft SDKs\Windows\v6.1netstat -ano | findstr 1433 TCP 0.0.0.0:1433 0.0.0.0:0 LISTENING 2268 TCP 127.0.0.1:1433 127.0.0.1:50758 ESTABLISHED 2268 TCP 127.0.0.1:50758 127.0.0.1:1433 ESTABLISHED 5008 TCP [::]:1433 [::]:0 LISTENING 2268 TCP [::1]:1433 [::1]:51202 ESTABLISHED 2268 TCP [::1]:1433 [::1]:51616 ESTABLISHED 2268 TCP [::1]:51202 [::1]:1433 ESTABLISHED 5008 TCP [::1]:51616 [::1]:1433 ESTABLISHED 5008 C:\Program Files\Microsoft SDKs\Windows\v6.1 SQL Server Log File: In case it helps 2010-01-30 12:58:59.01 Server Microsoft SQL Server 2008 (SP1) - 10.0.2531.0 (Intel X86) Mar 29 2009 10:27:29 Copyright (c) 1988-2008 Microsoft Corporation Express Edition on Windows NT 6.0 (Build 6002: Service Pack 2) 2010-01-30 12:58:59.01 Server (c) 2005 Microsoft Corporation. 2010-01-30 12:58:59.01 Server All rights reserved. 2010-01-30 12:58:59.01 Server Server process ID is 2268. 2010-01-30 12:58:59.01 Server System Manufacturer: 'Dell Inc.', System Model: 'Inspiron 1545'. 2010-01-30 12:58:59.01 Server Authentication mode is MIXED. 2010-01-30 12:58:59.02 Server Logging SQL Server messages in file 'c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\Log\ERRORLOG'. 2010-01-30 12:58:59.02 Server This instance of SQL Server last reported using a process ID of 7396 at 1/30/2010 12:57:38 PM (local) 1/30/2010 5:57:38 PM (UTC). This is an informational message only; no user action is required. 2010-01-30 12:58:59.02 Server Registry startup parameters: -d c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\master.mdf -e c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\Log\ERRORLOG -l c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\mastlog.ldf 2010-01-30 12:58:59.02 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required. 2010-01-30 12:58:59.02 Server Detected 2 CPUs. This is an informational message; no user action is required. 2010-01-30 12:58:59.08 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required. 2010-01-30 12:58:59.17 Server Node configuration: node 0: CPU mask: 0x00000003 Active CPU mask: 0x00000003. This message provides a description of the NUMA configuration for this computer. This is an informational message only. No user action is required. 2010-01-30 12:58:59.30 spid7s Starting up database 'master'. 2010-01-30 12:58:59.41 spid7s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required. 2010-01-30 12:58:59.67 spid7s FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'SQLEXPRESS'. 2010-01-30 12:58:59.92 spid7s SQL Trace ID 1 was started by login "sa". 2010-01-30 12:58:59.94 spid7s Starting up database 'mssqlsystemresource'. 2010-01-30 12:58:59.95 spid7s The resource database build version is 10.00.2531. This is an informational message only. No user action is required. 2010-01-30 12:59:00.82 spid7s Server name is 'DELL\SQLEXPRESS'. This is an informational message only. No user action is required. 2010-01-30 12:59:00.83 Server A self-generated certificate was successfully loaded for encryption. 2010-01-30 12:59:00.84 Server Server is listening on [ 'any' 1433]. 2010-01-30 12:59:00.84 Server Server is listening on [ 'any' 1433]. 2010-01-30 12:59:00.84 spid10s Starting up database 'model'. 2010-01-30 12:59:00.85 Server Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\SQLEXPRESS ]. 2010-01-30 12:59:00.86 Server Server local connection provider is ready to accept connection on [ \\.\pipe\MSSQL$SQLEXPRESS\sql\query ]. 2010-01-30 12:59:00.86 Server Dedicated administrator connection support was not started because it is disabled on this edition of SQL Server. If you want to use a dedicated administrator connection, restart SQL Server using the trace flag 7806. This is an informational message only. No user action is required. 2010-01-30 12:59:00.87 Server The SQL Server Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Error: 0x54b, state: 3. Failure to register an SPN may cause integrated authentication to fall back to NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies. 2010-01-30 12:59:00.87 spid7s Informational: No full-text supported languages found. 2010-01-30 12:59:00.87 Server SQL Server is now ready for client connections. This is an informational message; no user action is required. 2010-01-30 12:59:00.91 spid7s Starting up database 'msdb'. 2010-01-30 12:59:01.21 spid10s Clearing tempdb database. 2010-01-30 12:59:02.78 spid10s Starting up database 'tempdb'. 2010-01-30 12:59:03.30 spid13s The Service Broker protocol transport is disabled or not configured. 2010-01-30 12:59:03.30 spid13s The Database Mirroring protocol transport is disabled or not configured. 2010-01-30 12:59:03.31 spid7s Recovery is complete. This is an informational message only. No user action is required. 2010-01-30 12:59:03.31 spid13s Service Broker manager has started.

  Read the article

• Cisco 881 losing NAT NVI translation config after reload

  - by MasterRoot24

  This is a weird one, so I'll try to explain in as much detail as I can so I'm giving the whole picture. As I've mentioned in my other questions, I'm in the process of setting up a new Cisco 881 as my WAN router and NAT firewall. I'm facing an issue where NAT NVI rules that I have configured are not enabled after a reload of the router, regardless of the fact that they are present in the startup-config. In order to clarify this a little, here's the relevant section of my current running-config: Router1#show running-config | include nat source ip nat source list 1 interface FastEthernet4 overload ip nat source list 2 interface FastEthernet4 overload ip nat source static tcp 192.168.1.x 1723 interface FastEthernet4 1723 ip nat source static tcp 192.168.1.x 80 interface FastEthernet4 80 ip nat source static tcp 192.168.1.x 443 interface FastEthernet4 443 ip nat source static tcp 192.168.1.x 25 interface FastEthernet4 25 ip nat source static tcp 192.168.1.x 587 interface FastEthernet4 587 ip nat source static tcp 192.168.1.x 143 interface FastEthernet4 143 ip nat source static tcp 192.168.1.x 993 interface FastEthernet4 993 ...and here's the mappings 'in action': Router1#show ip nat nvi translations | include --- tcp <WAN IP>:25 192.168.1.x:25 --- --- tcp <WAN IP>:80 192.168.1.x:80 --- --- tcp <WAN IP>:143 192.168.1.x:143 --- --- tcp <WAN IP>:443 192.168.1.x:443 --- --- tcp <WAN IP>:587 192.168.1.x:587 --- --- tcp <WAN IP>:993 192.168.1.x:993 --- --- tcp <WAN IP>:1723 192.168.1.x:1723 --- --- ...and here's proof that the mappings are saved to startup-config: Router1#show startup-config | include nat source ip nat source list 1 interface FastEthernet4 overload ip nat source list 2 interface FastEthernet4 overload ip nat source static tcp 192.168.1.x 1723 interface FastEthernet4 1723 ip nat source static tcp 192.168.1.x 80 interface FastEthernet4 80 ip nat source static tcp 192.168.1.x 443 interface FastEthernet4 443 ip nat source static tcp 192.168.1.x 25 interface FastEthernet4 25 ip nat source static tcp 192.168.1.x 587 interface FastEthernet4 587 ip nat source static tcp 192.168.1.x 143 interface FastEthernet4 143 ip nat source static tcp 192.168.1.x 993 interface FastEthernet4 993 However, look what happens after a reload of the router: Router1#reload Proceed with reload? [confirm]Connection to router closed by remote host. Connection to router closed. $ ssh joe@router Password: Authorized Access only Router1>en Password: Router1#show ip nat nvi translations | include --- Router1# Router1#show ip nat translations | include --- tcp 188.222.181.173:25 192.168.1.2:25 --- --- tcp 188.222.181.173:80 192.168.1.2:80 --- --- tcp 188.222.181.173:143 192.168.1.2:143 --- --- tcp 188.222.181.173:443 192.168.1.2:443 --- --- tcp 188.222.181.173:587 192.168.1.2:587 --- --- tcp 188.222.181.173:993 192.168.1.2:993 --- --- tcp 188.222.181.173:1723 192.168.1.2:1723 --- --- Router1# Here's proof that the running config should have the mappings setup as NVI: Router1#show running-config | include nat source ip nat source list 1 interface FastEthernet4 overload ip nat source list 2 interface FastEthernet4 overload ip nat source static tcp 192.168.1.2 1723 interface FastEthernet4 1723 ip nat source static tcp 192.168.1.2 80 interface FastEthernet4 80 ip nat source static tcp 192.168.1.2 443 interface FastEthernet4 443 ip nat source static tcp 192.168.1.2 25 interface FastEthernet4 25 ip nat source static tcp 192.168.1.2 587 interface FastEthernet4 587 ip nat source static tcp 192.168.1.2 143 interface FastEthernet4 143 ip nat source static tcp 192.168.1.2 993 interface FastEthernet4 993 At this point, the mappings are not working (inbound connections from WAN on the HTTP/IMAP fail). I presume that this is because my interfaces are using ip nat enable for use with NVI mappings, instead of ip nat inside/outside. So, I re-apply the mappings: Router1#configure ter Router1#configure terminal Enter configuration commands, one per line. End with CNTL/Z. Router1(config)#ip nat source static tcp 192.168.1.2 1723 interface FastEthernet4 1723 Router1(config)#ip nat source static tcp 192.168.1.2 80 interface FastEthernet4 80 Router1(config)#ip nat source static tcp 192.168.1.2 443 interface FastEthernet4 443 Router1(config)#ip nat source static tcp 192.168.1.2 25 interface FastEthernet4 25 Router1(config)#ip nat source static tcp 192.168.1.2 587 interface FastEthernet4 587 Router1(config)#ip nat source static tcp 192.168.1.2 143 interface FastEthernet4 143 Router1(config)#ip nat source static tcp 192.168.1.2 993 interface FastEthernet4 993 Router1(config)#end ... then they show up correctly: Router1#show ip nat nvi translations | include --- tcp 188.222.181.173:25 192.168.1.2:25 --- --- tcp 188.222.181.173:80 192.168.1.2:80 --- --- tcp 188.222.181.173:143 192.168.1.2:143 --- --- tcp 188.222.181.173:443 192.168.1.2:443 --- --- tcp 188.222.181.173:587 192.168.1.2:587 --- --- tcp 188.222.181.173:993 192.168.1.2:993 --- --- tcp 188.222.181.173:1723 192.168.1.2:1723 --- --- Router1# Router1#show ip nat translations | include --- Router1# ... furthermore, now from both WAN and LAN, the services mapped above now work until the next reload. All of the above is required every time I have to reload the router (which is all too often at the moment :-( ). Here's my full current config: ! ! Last configuration change at 20:20:15 UTC Tue Dec 11 2012 by xxx version 15.2 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname xxx ! boot-start-marker boot-end-marker ! ! enable secret 4 xxxx ! aaa new-model ! ! aaa authentication login local_auth local ! ! ! ! ! aaa session-id common ! memory-size iomem 10 ! crypto pki trustpoint TP-self-signed-xxx enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-xxx revocation-check none rsakeypair TP-self-signed-xxx ! ! crypto pki certificate chain TP-self-signed-xxx certificate self-signed 01 xxx quit ip gratuitous-arps ip auth-proxy max-login-attempts 5 ip admission max-login-attempts 5 ! ! ! ! ! ip domain list dmz.xxx.local ip domain list xxx.local ip domain name dmz.xxx.local ip name-server 192.168.1.x ip cef login block-for 3 attempts 3 within 3 no ipv6 cef ! ! multilink bundle-name authenticated license udi pid CISCO881-SEC-K9 sn xxx ! ! username admin privilege 15 secret 4 xxx username joe secret 4 xxx ! ! ! ! ! ip ssh time-out 60 ! ! ! ! ! ! ! ! ! interface FastEthernet0 no ip address ! interface FastEthernet1 no ip address ! interface FastEthernet2 no ip address ! interface FastEthernet3 switchport access vlan 2 no ip address ! interface FastEthernet4 ip address dhcp ip access-group 101 in ip nat enable duplex auto speed auto ! interface Vlan1 ip address 192.168.1.x 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip nat enable ! interface Vlan2 ip address 192.168.0.x 255.255.255.0 ! ip forward-protocol nd ip http server ip http access-class 1 ip http authentication local ip http secure-server ! ! ip nat source list 1 interface FastEthernet4 overload ip nat source list 2 interface FastEthernet4 overload ip nat source static tcp 192.168.1.x 1723 interface FastEthernet4 1723 ! ! access-list 1 permit 192.168.0.0 0.0.0.255 access-list 2 permit 192.168.1.0 0.0.0.255 access-list 101 permit udp 193.x.x.0 0.0.0.255 any eq 5060 access-list 101 deny udp any any eq 5060 access-list 101 permit ip any any ! ! ! ! control-plane ! ! banner motd Authorized Access only ! line con 0 exec-timeout 15 0 login authentication local_auth line aux 0 exec-timeout 15 0 login authentication local_auth line vty 0 4 access-class 2 in login authentication local_auth length 0 transport input all ! ! end I'd appreciate it greatly if anyone can help me find out why these mappings are not setup correctly using the saved config after a reload.

  Read the article

• SQL Server 08 Express error when connecting to localhost - "Timeout expired". Works with ::1 or 127.0.0.1

  - by Adam A

  EDIT New info: Navigating to localhost:1434 in Chrome gives me an "ERR_EMPTY_RESPONSE", while other ports give me an "Oops! This link appears to be broken". So it seems to binding ok there? So here's my setup so far: I've configured Windows Firewall to allow TCP on 1433 and UDP on 1434. I've set up SQL Server to use any IP on Port 1433 (using the SQL Server Configuration Manager). My hosts file contains the default entries ("127.0.0.1 localhost" and "::1 localhost"). I sometimes have a debug session of Visual Web Developer running a webserver, but it's on a specific port (localhost:5XXXX). What I've tried: I CAN ping localhost in a cmd prompt. I CAN connect to the database through SSMS if I specify 127.0.0.1 or ::1 as the server name. I CAN'T connect to the database through SSMS (or ADO.NET) if I specify localhost as the server name. I've tried both Windows and SQL Authentication The error I get is the standard Can't connect to localhost. Additional Information -- Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. (Microsoft Sql Server) Other considerations: Stopping the Visual Web Developer web server from the taskbar doesn't affect the sql problem. The SQL error log says that it's listening on some piped name url at start up (I don't see how this would affect localhost but not 127.0.0.1 though). I could probably just use 127.0.0.1 everywhere, but it scares me that localhost isn't working and I'd like to figure out why. I'm not much of a networking or sql server guy so I'm stuck. If you want me to try anything to help diagnose just put it in a comment and I'll give it a go. Netstat results: Setting SDK environment relative to C:\Program Files\Microsoft SDKs\Windows\v6.1 Targeting Windows Server 2008 x86 DEBUG C:\Program Files\Microsoft SDKs\Windows\v6.1netstat -ano | findstr 1434 UDP 0.0.0.0:1434 *:* 6868 UDP [::]:1434 *:* 6868 C:\Program Files\Microsoft SDKs\Windows\v6.1netstat -ano | findstr 1433 TCP 0.0.0.0:1433 0.0.0.0:0 LISTENING 2268 TCP 127.0.0.1:1433 127.0.0.1:50758 ESTABLISHED 2268 TCP 127.0.0.1:50758 127.0.0.1:1433 ESTABLISHED 5008 TCP [::]:1433 [::]:0 LISTENING 2268 TCP [::1]:1433 [::1]:51202 ESTABLISHED 2268 TCP [::1]:1433 [::1]:51616 ESTABLISHED 2268 TCP [::1]:51202 [::1]:1433 ESTABLISHED 5008 TCP [::1]:51616 [::1]:1433 ESTABLISHED 5008 C:\Program Files\Microsoft SDKs\Windows\v6.1 SQL Server Log File: In case it helps 2010-01-30 12:58:59.01 Server Microsoft SQL Server 2008 (SP1) - 10.0.2531.0 (Intel X86) Mar 29 2009 10:27:29 Copyright (c) 1988-2008 Microsoft Corporation Express Edition on Windows NT 6.0 (Build 6002: Service Pack 2) 2010-01-30 12:58:59.01 Server (c) 2005 Microsoft Corporation. 2010-01-30 12:58:59.01 Server All rights reserved. 2010-01-30 12:58:59.01 Server Server process ID is 2268. 2010-01-30 12:58:59.01 Server System Manufacturer: 'Dell Inc.', System Model: 'Inspiron 1545'. 2010-01-30 12:58:59.01 Server Authentication mode is MIXED. 2010-01-30 12:58:59.02 Server Logging SQL Server messages in file 'c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\Log\ERRORLOG'. 2010-01-30 12:58:59.02 Server This instance of SQL Server last reported using a process ID of 7396 at 1/30/2010 12:57:38 PM (local) 1/30/2010 5:57:38 PM (UTC). This is an informational message only; no user action is required. 2010-01-30 12:58:59.02 Server Registry startup parameters: -d c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\master.mdf -e c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\Log\ERRORLOG -l c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\mastlog.ldf 2010-01-30 12:58:59.02 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required. 2010-01-30 12:58:59.02 Server Detected 2 CPUs. This is an informational message; no user action is required. 2010-01-30 12:58:59.08 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required. 2010-01-30 12:58:59.17 Server Node configuration: node 0: CPU mask: 0x00000003 Active CPU mask: 0x00000003. This message provides a description of the NUMA configuration for this computer. This is an informational message only. No user action is required. 2010-01-30 12:58:59.30 spid7s Starting up database 'master'. 2010-01-30 12:58:59.41 spid7s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required. 2010-01-30 12:58:59.67 spid7s FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'SQLEXPRESS'. 2010-01-30 12:58:59.92 spid7s SQL Trace ID 1 was started by login "sa". 2010-01-30 12:58:59.94 spid7s Starting up database 'mssqlsystemresource'. 2010-01-30 12:58:59.95 spid7s The resource database build version is 10.00.2531. This is an informational message only. No user action is required. 2010-01-30 12:59:00.82 spid7s Server name is 'DELL\SQLEXPRESS'. This is an informational message only. No user action is required. 2010-01-30 12:59:00.83 Server A self-generated certificate was successfully loaded for encryption. 2010-01-30 12:59:00.84 Server Server is listening on [ 'any' 1433]. 2010-01-30 12:59:00.84 Server Server is listening on [ 'any' 1433]. 2010-01-30 12:59:00.84 spid10s Starting up database 'model'. 2010-01-30 12:59:00.85 Server Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\SQLEXPRESS ]. 2010-01-30 12:59:00.86 Server Server local connection provider is ready to accept connection on [ \\.\pipe\MSSQL$SQLEXPRESS\sql\query ]. 2010-01-30 12:59:00.86 Server Dedicated administrator connection support was not started because it is disabled on this edition of SQL Server. If you want to use a dedicated administrator connection, restart SQL Server using the trace flag 7806. This is an informational message only. No user action is required. 2010-01-30 12:59:00.87 Server The SQL Server Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Error: 0x54b, state: 3. Failure to register an SPN may cause integrated authentication to fall back to NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies. 2010-01-30 12:59:00.87 spid7s Informational: No full-text supported languages found. 2010-01-30 12:59:00.87 Server SQL Server is now ready for client connections. This is an informational message; no user action is required. 2010-01-30 12:59:00.91 spid7s Starting up database 'msdb'. 2010-01-30 12:59:01.21 spid10s Clearing tempdb database. 2010-01-30 12:59:02.78 spid10s Starting up database 'tempdb'. 2010-01-30 12:59:03.30 spid13s The Service Broker protocol transport is disabled or not configured. 2010-01-30 12:59:03.30 spid13s The Database Mirroring protocol transport is disabled or not configured. 2010-01-30 12:59:03.31 spid7s Recovery is complete. This is an informational message only. No user action is required. 2010-01-30 12:59:03.31 spid13s Service Broker manager has started.

  Read the article

• What is the RSA SecurID packet format?

  - by bmatthews68

  I am testing a client application that authenticates using RSA SecurID hardware tokens. The authentication is failing and I am not finding any useful information in the log files. I am using Authentication Manager 8.0 and the Java SDK. I have a traffic capture which I would like to analyze with Wireshark to and from port 5500 on the authentication agent. But I can't find the packet format searching the internet or on the the RSA SecurCare knowledge base. Can anybody direct me to the packet format? Here is an extract from the rsa_api_debug.log file which dumps the UDP payload of the request and the response: [2013-11-06 15:11:08,602] main - b.a():? - Sending 508 bytes to 192.168.10.121; contents: 5c 5 0 3 3 5 0 0 2 0 0 0 0 0 1 ea 71 ee 50 6e 45 83 95 8 39 4 72 e 55 cf cc 62 6d d5 a4 10 79 89 13 d5 23 6a c1 ab 33 8 c3 a1 91 92 93 4f 1e 4 8d 2a 22 2c d0 c3 7 fc 96 5f ba bf 0 80 60 60 9d 1d 9c b9 f3 58 4b 43 18 5f e0 6d 5e f5 f4 5d df bf 41 b9 9 ae 46 a0 a9 66 2d c7 6 f6 d7 66 f1 4 f8 ad 8a 9f 4d 7e e5 9c 45 67 16 15 33 70 f0 1 d5 c0 38 39 f5 fd 5e 15 4f e3 fe ea 70 fa 30 c9 e0 18 ab 64 a9 fe 2c 89 78 a2 96 b6 76 3e 2e a2 ae 2e e0 69 80 8d 51 9 56 80 f4 1a 73 9a 70 f3 e7 c1 49 49 c3 41 3 c6 ce 3e a8 68 71 3f 2 b2 9b 27 8e 63 ce 59 38 64 d1 75 b7 b7 1f 62 eb 4d 1d de c7 21 e0 67 85 b e6 c3 80 0 60 54 47 e ef 3 f9 33 7b 78 e2 3e db e4 8e 76 73 45 3 38 34 1e dd 43 3e 72 a7 37 72 5 34 8e f4 ba 9d 71 6c e 45 49 fa 92 a f6 b bf 5 b 4f dc bd 19 0 7e d2 ef 94 d 3b 78 17 37 d9 ae 19 3a 7e 46 7d ea e4 3a 8c e1 e5 9 50 a2 eb df f2 57 97 bc f2 c3 a7 6f 19 7f 2c 1a 3f 94 25 19 4b b2 37 ed ce 97 f ae f ec c9 f5 be f0 8f 72 1c 34 84 1b 11 25 dd 44 8b 99 75 a4 77 3d e1 1d 26 41 58 55 5f d5 27 82 c d3 2a f8 4 aa 8d 5e e4 79 0 49 43 59 27 5e 15 87 a f4 c4 57 b6 e1 f8 79 3b d3 20 69 5e d0 80 6a 6b 9f 43 79 84 94 d0 77 b6 fc f 3 22 ca b9 35 c0 e8 7b e9 25 26 7f c9 fb e4 a7 fc bb b7 75 ac 7b bc f4 bb 4f a8 80 9b 73 da 3 94 da 87 e7 94 4c 80 b3 f1 2e 5b d8 2 65 25 bb 92 f4 92 e3 de 8 ee 2 30 df 84 a4 69 a6 a1 d0 9c e7 8e f 8 71 4b d0 1c 14 ac 7c c6 e3 2a 2e 2a c2 32 bc 21 c4 2f 4d df 9a f3 10 3e e5 c5 7f ad e4 fb ae 99 bf 58 0 20 0 0 0 0 0 0 0 0 0 0 [2013-11-06 15:11:08,602] main - b.b():? - Enterring getResponse [2013-11-06 15:11:08,618] main - b.a():? - Enterring getTimeoutValue(AceRequest AceAuthV4Request[AbstractAceRequest[ hdr=AcePacketHeader[Type=92 Ver=5 AppID=3 Enc=ENCRYPT Hi-Proto=5 Opt=0 CirID=0] created=1383750668571 trailer=AcePackeTrailer[nonce=39e7a607b517c4dd crc=722833884]] user=bmatthews node-sec-req=0 wpcodes=null resp-mac=0 m-resp-mac=0 client=192.168.10.3 passcode==ZTmY|? sec-sgmt=AceSecondarySegments[ cnt=3] response=none]) [2013-11-06 15:11:08,618] main - b.a():? - acm base timeout: 5 [2013-11-06 15:11:08,618] main - b.b():? - Timeout is 5000 [2013-11-06 15:11:08,618] main - b.b():? - Current retries: 0 [2013-11-06 15:11:10,618] main - b.b():? - Received 508 bytes from 192.168.10.121; contents: 6c 5 0 3 3 6 0 0 0 0 0 1 4d 18 55 ca 18 df 84 49 70 ee 24 4a a5 c3 1c 4e 36 d8 51 ad c7 ef 49 89 6e 2e 23 b4 7e 49 73 4 15 d f4 d5 c0 bf fc 72 5b be d1 62 be e0 de 23 56 bf 26 36 7f b f0 ba 42 61 9b 6f 4b 96 88 9c e9 86 df c6 82 e5 4c 36 ee dc 1e d8 a1 0 71 65 89 dc ca ee 87 ae d6 60 c 86 1c e8 ef 9f d9 b9 4c ed 7 55 77 f3 fc 92 61 f9 32 70 6f 32 67 4d fc 17 4e 7b eb c3 c7 8c 64 3f d0 d0 c7 86 ad 4e 21 41 a2 80 dd 35 ba 31 51 e2 a0 ef df 82 52 d0 a8 43 cb 7c 51 c 85 4 c5 b2 ec 8f db e1 21 90 f5 d7 1b d7 14 ca c0 40 c5 41 4e 92 ee 3 ec 57 7 10 45 f3 54 d7 e4 e6 6e 79 89 9a 21 70 7a 3f 20 ab af 68 34 21 b7 1b 25 e1 ab d 9f cd 25 58 5a 59 b1 b8 98 58 2f 79 aa 8a 69 b9 4c c1 7d 36 28 a3 23 f5 cc 2b ab 9e f a1 79 ab 90 fd 5f 76 9f d9 86 d1 fc 4c 7a 4 24 6d de 64 f1 53 22 b0 b7 91 9a 7c a2 67 2a 35 68 83 74 6a 21 ac eb f8 a2 29 53 21 2f 5a 42 d6 26 b8 f6 7f 79 96 5 3b c2 15 3a b d0 46 42 b7 74 4e 1f 6a ad f5 73 70 46 d3 f8 e a3 83 a3 15 29 6e 68 2 df 56 5c 88 8d 6c 2f ab 11 f1 5 73 58 ec 4 5f 80 e3 ca 56 ce 8 b9 73 7c 79 fc 3 ff f1 40 97 bb e3 fb 35 d1 8d ba 23 fc 2d 27 5b f7 be 15 de 72 30 b e d6 5c 98 e8 44 bd ed a4 3d 87 b8 9b 35 e9 64 80 9a 2a 3c a2 cf 3e 39 cb f6 a2 f4 46 c7 92 99 bc f7 4a de 7e 79 9d 9b d9 34 7f df 27 62 4f 5b ef 3a 4c 8d 2e 66 11 f7 8 c3 84 6e 57 ba 2a 76 59 58 78 41 18 66 76 fd 9d cb a2 14 49 e1 59 4a 6e f5 c3 94 ae 1a ba 51 fc 29 54 ba 6c 95 57 6b 20 87 cc b8 dc 5f 48 72 9c c0 2c dd 60 56 4e 4c 6c 1d 40 bd 4 a1 10 4e a4 b1 87 83 dd 1c f2 df 4c [2013-11-06 15:11:10,618] main - a.a():? - Response status is: 1 [2013-11-06 15:11:10,618] main - a.a():? - Authenticaton failed for bmatthews ! [2013-11-06 15:11:10,618] main - AuthSessionFactory.shutdown():? - RSA Authentication API shutdown invoked [2013-11-06 15:11:10,618] main - AuthSessionFactory.shutdown():? - RSA Authentication API shutdown successful

  Read the article

• Gmail rejects emails. Openspf.net fails the tests

  - by pablomedok

  I've got a problem with Gmail. It started after one of our trojan infected PCs sent spam for one day from our IP address. We've fixed the problem, but we got into 3 black lists. We've fixed that, too. But still every time we send an email to Gmail the message is rejected: So I've checked Google Bulk Sender's guide once again and found an error in our SPF record and fixed it. Google says everything should become fine after some time, but this doesn't happen. 3 weeks already passed but we still can't send emails to Gmail. Our MX setup is a bit complex, but not too much: We have a domain name delo-company.com, it has it's own mail @delo-company.com (this one is fine, but the problems are with sub-domain name corp.delo-company.com). Delo-company.com domain has several DNS records for the subdomain: corp A 82.209.198.147 corp MX 20 corp.delo-company.com corp.delo-company.com TXT "v=spf1 ip4:82.209.198.147 ~all" (I set ~all for testing purposes only, it was -all before that) These records are for our corporate Exchange 2003 server at 82.209.198.147. Its LAN name is s2.corp.delo-company.com so its HELO/EHLO greetings are also s2.corp.delo-company.com. To pass EHLO check we've also created some records in delo-company.com's DNS: s2.corp A 82.209.198.147 s2.corp.delo-company.com TXT "v=spf1 ip4:82.209.198.147 ~all" As I understand SPF verifications should be passed in this way: Out server s2 connects to MX of the recepient (Rcp.MX): EHLO s2.corp.delo-company.com Rcp.MX says Ok, and makes SPF check of HELO/EHLO. It does NSlookup for s2.corp.delo-company.com and gets the above DNS-records. TXT records says that s2.corp.delo-company.com should be only from IP 82.209.198.147. So it should be passed. Then our s2 server says RCPT FROM: Rcp.MX` server checks it, too. The values are the same so they should also be positive. Maybe there is also a rDNS check, but I'm not sure what is checked HELO or RCPT FROM. Our PTR record for 82.209.198.147 is: 147.198.209.82.in-addr.arpa. 86400 IN PTR s2.corp.delo-company.com. To me everything looks fine, but anyway all emails are rejected by Gmail. So, I've checked MXtoolbox.com - it says everything is fine, I passed http://www.kitterman.com/spf/validate.html Python check, I did 25port.com email test. It's fine, too: Return-Path: <[email protected]> Received: from s2.corp.delo-company.com (82.209.198.147) by verifier.port25.com id ha45na11u9cs for <[email protected]>; Fri, 2 Mar 2012 13:03:21 -0500 (envelope-from <[email protected]>) Authentication-Results: verifier.port25.com; spf=pass [email protected] Authentication-Results: verifier.port25.com; domainkeys=neutral (message not signed) [email protected] Authentication-Results: verifier.port25.com; dkim=neutral (message not signed) Authentication-Results: verifier.port25.com; sender-id=pass [email protected] Content-class: urn:content-classes:message MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----_=_NextPart_001_01CCF89E.BE02A069" Subject: test Date: Fri, 2 Mar 2012 21:03:15 +0300 X-MimeOLE: Produced By Microsoft Exchange V6.5 Message-ID: <[email protected]> X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: test Thread-Index: Acz4jS34oznvbyFQR4S5rXsNQFvTdg== From: =?koi8-r?B?89XQ0tXOwMsg8MHXxcw=?= <[email protected]> To: <[email protected]> I also checked with [email protected], but it FAILs all the time, no matter which SPF records I make: <s2.corp.delo-company.com #5.7.1 smtp;550 5.7.1 <[email protected]>: Recipient address rejected: SPF Tests: Mail-From Result="softfail": Mail From="[email protected]" HELO name="s2.corp.delo-company.com" HELO Result="softfail" Remote IP="82.209.198.147"> I've filled Gmail form twice, but nothing happens. We do not send spam, only emails for our clients. 2 or 3 times we did mass emails (like New Year Greetings and sales promos) from corp.delo-company.com addresses, but they where all complying to Gmail Bulk Sender's Guide (I mean SPF, Open Relays, Precedence: Bulk and Unsubscribe tags). So, this should be not a problem. Please, help me. What am I doing wrong? UPD: I also tried Unlocktheinbox.com test and the server also fails this test. Here is the result: http://bit.ly/wYr39h . Here is one more http://bit.ly/ypWLjr I also tried to send email from that server manually via telnet and everything is fine. Here is what I type: 220 mx.google.com ESMTP g15si4811326anb.170 HELO s2.corp.delo-company.com 250 mx.google.com at your service MAIL FROM: <[email protected]> 250 2.1.0 OK g15si4811326anb.170 RCPT TO: <[email protected]> 250 2.1.5 OK g15si4811326anb.170 DATA 354 Go ahead g15si4811326anb.170 From: [email protected] To: Pavel <[email protected]> Subject: Test 28 This is telnet test . 250 2.0.0 OK 1330795021 g15si4811326anb.170 QUIT 221 2.0.0 closing connection g15si4811326anb.170 And this is what I get: Delivered-To: [email protected] Received: by 10.227.132.73 with SMTP id a9csp96864wbt; Sat, 3 Mar 2012 09:17:02 -0800 (PST) Received: by 10.101.128.12 with SMTP id f12mr4837125ann.49.1330795021572; Sat, 03 Mar 2012 09:17:01 -0800 (PST) Return-Path: <[email protected]> Received: from s2.corp.delo-company.com (s2.corp.delo-company.com. [82.209.198.147]) by mx.google.com with SMTP id g15si4811326anb.170.2012.03.03.09.15.59; Sat, 03 Mar 2012 09:17:00 -0800 (PST) Received-SPF: pass (google.com: domain of [email protected] designates 82.209.198.147 as permitted sender) client-ip=82.209.198.147; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates 82.209.198.147 as permitted sender) [email protected] Date: Sat, 03 Mar 2012 09:17:00 -0800 (PST) Message-Id: <[email protected]> From: [email protected] To: Pavel <[email protected]> Subject: Test 28 This is telnet test

  Read the article

• Encryption is hard: AES encryption to Hex

  - by Rob Cameron

  So, I've got an app at work that encrypts a string using ColdFusion. ColdFusion's bulit-in encryption helpers make it pretty simple: encrypt('string_to_encrypt','key','AES','HEX') What I'm trying to do is use Ruby to create the same encrypted string as this ColdFusion script is creating. Unfortunately encryption is the most confusing computer science subject known to man. I found a couple helper methods that use the openssl library and give you a really simple encryption/decryption method. Here's the resulting string: "\370\354D\020\357A\227\377\261G\333\314\204\361\277\250" Which looks unicode-ish to me. I've tried several libraries to convert this to hex but they all say it contains invalid characters. Trying to unpack it results in this: string = "\370\354D\020\357A\227\377\261G\333\314\204\361\277\250" string.unpack('U') ArgumentError: malformed UTF-8 character from (irb):19:in `unpack' from (irb):19 At the end of the day it's supposed to look like this (the output of the ColdFusion encrypt method): F8E91A689565ED24541D2A0109F201EF Of course that's assuming that all the padding, initialization vectors, salts, cypher types and a million other possible differences all line up. Here's the simple script I'm using to encrypt/decrypt: def aes(m,k,t) (aes = OpenSSL::Cipher::Cipher.new('aes-256-cbc').send(m)).key = Digest::SHA256.digest(k) aes.update(t) << aes.final end def encrypt(key, text) aes(:encrypt, key, text) end def decrypt(key, text) aes(:decrypt, key, text) end Any help? Maybe just a simple option I can pass to OpenSSL::Cipher::Cipher that will tell it to hex-encode the final string?

  Read the article

• Is it possible to convert a 40-character SHA1 hash to a 20-character SHA1 hash?

  - by ewitch

  My problem is a bit hairy, and I may be asking the wrong questions, so please bear with me... I have a legacy MySQL database which stores the user passwords & salts for a membership system. Both of these values have been hashed using the Ruby framework - roughly like this: hashedsalt = Digest::SHA1.hexdigest("--#{Time.now.to_s}--#{login}--") hashedpassword = Digest::SHA1.hexdigest("#{hashedsalt}:#{password}") So both values are stored as 40-character strings (varchar(40)) in MySQL. Now I need to import all of these users into the ASP.NET membership framework for a new web site, which uses a SQL Server database. It is my understanding that the the way I have ASP.NET membership configured, the user passwords and salts are also stored in the membership database (in table aspnet_Membership) as SHA1 hashes, which are then Base64 encoded (see here for details) and stored as nvarchar(128) data. But from the length of the Base64 encoded strings that are stored (28 characters) it seems that the SHA1 hashes that ASP.NET membership generates are only 20 characters long, rather than 40. From some other reading I have been doing I am thinking this has to do with the number of bits per character/character set/encoding or something related. So is there some way to convert the 40-character SHA1 hashes to 20-character hashes which I can then transfer to the new ASP.NET membership data table? I'm pretty familiar with ASP.NET membership by now but I feel like I'm just missing this one piece. However, it may also be known that SHA1 in Ruby and SHA1 in .NET are incompatible, so I'm fighting a losing battle... Thanks in advance for any insight.

  Read the article

• Securing an ADF Application using OES11g: Part 1

  - by user12587121

  Future releases of the Oracle stack should allow ADF applications to be secured natively with Oracle Entitlements Server (OES). In a sequence of postings here I explore one way to achive this with the current technology, namely OES 11.1.1.5 and ADF 11.1.1.6. ADF Security Basics ADF Bascis The Application Development Framework (ADF) is Oracle’s preferred technology for developing GUI based Java applications.  It can be used to develop a UI for Swing applications or, more typically in the Oracle stack, for Web and J2EE applications.  ADF is based on and extends the Java Server Faces (JSF) technology.  To get an idea, Oracle provides an online demo to showcase ADF components. ADF can be used to develop just the UI part of an application, where, for example, the data access layer is implemented using some custom Java beans or EJBs.  However ADF also has it’s own data access layer, ADF Business Components (ADF BC) that will allow rapid integration of data from data bases and Webservice interfaces to the ADF UI component.   In this way ADF helps implement the MVC  approach to building applications with UI and data components. The canonical tutorial for ADF is to open JDeveloper, define a connection to a database, drag and drop a table from the database view to a UI page, build and deploy.  One has an application up and running very quickly with the ability to quickly integrate changes to, for example, the DB schema. ADF allows web pages to be created graphically and components like tables, forms, text fields, graphs and so on to be easily added to a page.  On top of JSF Oracle have added drag and drop tooling with JDeveloper and declarative binding of the UI to the data layer, be it database, WebService or Java beans.  An important addition is the bounded task flow which is a reusable set of pages and transitions.   ADF adds some steps to the page lifecycle defined in JSF and adds extra widgets including powerful visualizations. It is worth pointing out that the Oracle Web Center product (portal, content management and so on) is based on and extends ADF. ADF Security ADF comes with it’s own security mechanism that is exposed by JDeveloper at development time and in the WLS Console and Enterprise Manager (EM) at run time. The security elements that need to be addressed in an ADF application are: authentication, authorization of access to web pages, task-flows, components within the pages and data being returned from the model layer. One  typically relies on WLS to handle authentication and because of this users and groups will also be handled by WLS.  Typically in a Dev environment, users and groups are stored in the WLS embedded LDAP server. One has a choice when enabling ADF security (Application->Secure->Configure ADF Security) about whether to turn on ADF authorization checking or not: In the case where authorization is enabled for ADF one defines a set of roles in which we place users and then we grant access to these roles to the different ADF elements (pages or task flows or elements in a page). An important notion here is the difference between Enterprise Roles and Application Roles. The idea behind an enterprise role is that is defined in terms of users and LDAP groups from the WLS identity store.  “Enterprise” in the sense that these are things available for use to all applications that use that store.  The other kind of role is an Application Role and the idea is that  a given application will make use of Enterprise roles and users to build up a set of roles for it’s own use.  These application roles will be available only to that application.   The general idea here is that the enterprise roles are relatively static (for example an Employees group in the LDAP directory) while application roles are more dynamic, possibly depending on time, location, accessed resource and so on.  One of the things that OES adds that is that we can define these dynamic membership conditions in Role Mapping Policies. To make this concrete, here is how, at design time in Jdeveloper, one assigns these rights in Jdeveloper, which puts them into a file called jazn-data.xml: When the ADF app is deployed to a WLS this JAZN security data is pushed to the system-jazn-data.xml file of the WLS deployment for the policies and application roles and to the WLS backing LDAP for the users and enterprise roles.  Note the difference here: after deploying the application we will see the users and enterprise roles show up in the WLS LDAP server.  But the policies and application roles are defined in the system-jazn-data.xml file.  Consult the embedded WLS LDAP server to manage users and enterprise roles by going to the domain console and then Security Realms->myrealm->Users and Groups: For production environments (or in future to share this data with OES) one would then perform the operation of “reassociating” this security policy and application role data to a DB schema (or an LDAP).  This is done in the EM console by reassociating the Security Provider.  This blog posting has more explanations and references on this reassociation process. If ADF Authentication and Authorization are enabled then the Security Policies for a deployed application can be managed in EM.  Our goal is to be able to manage security policies for the applicaiton rather via OES and it's console. Security Requirements for an ADF Application With this package tour of ADF security we can see that to secure an ADF application with we would expect to be able to take care of at least the following items: Authentication, including a user and user-group store Authorization for page access Authorization for bounded Task Flow access.  A bounded task flow has only one point of entry and so if we protect that entry point by calling to OES then all the pages in the flow are protected.  Authorization for viewing data coming from the data access layer In the next posting we will describe a sample ADF application and required security policies. References ADF Dev Guide: Fusion Middleware Fusion Developer's Guide for Oracle Application Development Framework: Enabling ADF Security in a Fusion Web Application Oracle tutorial on securing a sample ADF application, appears to require ADF 11.1.2 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• How to combine twill and python into one code that could be run on "Google App Engine"?

  - by brilliant

  Hello everybody!!! I have installed twill on my computer (having previously installed Python 2.5) and have been using it recently. Python is installed on disk C on my computer: C:\Python25 And the twill folder (“twill-0.9”) is located here: E:\tmp\twill-0.9 Here is a code that I’ve been using in twill: go “some website’s sign-in page URL” formvalue 2 userid “my login” formvalue 2 pass “my password” submit go “URL of some other page from that website” save_html result.txt This code helps me to log in to one website, in which I have an account, record the HTML code of some other page of that website (that I can access only after logging in), and store it in a file named “result.txt” (of course, before using this code I firstly need to replace “my login” with my real login, “my password” with my real password, “some website’s sign-in page URL” and “URL of some other page from that website” with real URLs of that website, and number 2 with the number of the form on that website that is used as a sign-in form on that website’s log-in page) This code I store in “test.twill” file that is located in my “twill-0.9” folder: E:\tmp\twill-0.9\test.twill I run this file from my command prompt: python twill-sh test.twill Now, I also have installed “Google App Engine SDK” from “Google App Engine” and have also been using it for awhile. For example, I’ve been using this code: import hashlib m = hashlib.md5() m.update("Nobody inspects") m.update(" the spammish repetition ") print m.hexdigest() This code helps me transform the phrase “Nobody inspects the spammish repetition” into md5 digest. Now, how can I put these two pieces of code together into one python script that I could run on “Google App Engine”? Let’s say, I want my code to log in to a website from “Google App Engine”, go to another page on that website, record its HTML code (that’s what my twill code does) and than transform this HTML code into its md5 digest (that’s what my second code does). So, how can I combine those two codes into one python code? I guess, it should be done somehow by importing twill, but how can it be done? Can a python code - the one that is being run by “Google App Engine” - import twill from somewhere on the internet? Or, perhaps, twill is already installed on “Google App Engine”?

  Read the article

• What is the proper way to code a read-while loop in Scala?

  - by ARKBAN

  What is the "proper" of writing the standard read-while loop in Scala? By proper I mean written in a Scala-like way as opposed to a Java-like way. Here is the code I have in Java: MessageDigest md = MessageDigest.getInstance( "MD5" ); InputStream input = new FileInputStream( "file" ); byte[] buffer = new byte[1024]; int readLen; while( ( readLen = input.read( buffer ) ) != -1 ) md.update( buffer, 0, readLen ); return md.digest(); Here is the code I have in Scala: val md = MessageDigest.getInstance( hashInfo.algorithm ) val input = new FileInputStream( "file" ) val buffer = new Array[ Byte ]( 1024 ) var readLen = 0 while( readLen != -1 ) { readLen = input.read( buffer ) if( readLen != -1 ) md.update( buffer, 0, readLen ) } md.digest The Scala code is correct and works, but feels very un-Scala-ish. For one it is a literal translation of the Java code, taking advantage of none of the advantages of Scala. Further it is actually longer than the Java code! I really feel like I'm missing something, but I can't figure out what. I'm fairly new to Scala, and so I'm asking the question to avoid falling into the pitfall of writing Java-style code in Scala. I'm more interested in the Scala way to solve this kind of problem than in any specific helper method that might be provided by the Scala API to hash a file. (I apologize in advance for my ad hoc Scala adjectives throughout this question.)

  Read the article

• x509 certificate Information

  - by sid

  Certificate: Data: Version: 3 (0x2) Serial Number: 95 (0x5f) Signature Algorithm: sha1WithRSAEncryption Issuer: C=, O=, CN= Validity Not Before: Apr 22 16:42:11 2008 GMT Not After : Apr 22 16:42:11 2009 GMT Subject: C=, O=, CN=, L=, ST= Subject Public Key Info: Public Key Algorithm: rsaEncryption RSA Public Key: (1024 bit) Modulus (1024 bit): ... ... ... Exponent: 65537 (0x10001) X509v3 extensions: X509v3 Key Usage: critical Digital Signature, Key Encipherment X509v3 Extended Key Usage: critical Code Signing X509v3 Authority Key Identifier: keyid: ... Signature Algorithm: sha1WithRSAEncryption a9:55:56:9b:9e:60:7a:57:fd:7:6b:1e:c0:79:1c:50:62:8f: ... ... -----BEGIN CERTIFICATE----- ... ... ... -----END CERTIFICATE----- In This Certificate, Which is the public key? is Modulus? what does the Signature Algorithm, a9:55:56:... represent (is it message digest)? And what is between -----BEGIN CERTIFICATE----- & -----END CERTIFICATE-----, is That the whole certificate? As I am novice, little bit confusing between the message digest and public key? Thanks in Advance-opensid

  Read the article

• trouble setting up anonymous login in ejabberd

  - by sofia

  Hi, In ejabberd.cfg I have the following {host_config, "thisislove-MacBook-2.local", [{auth_method, [internal, anonymous]}, {allow_multiple_connections, false}, {anonymous_protocol, both}]}. but when using speeqe javascript client (speeqe.com) to connect, I see it sends <body rid='1366284187' xmlns='http://jabber.org/protocol/httpbind' to='thisislove-macbook-2.local' xml:lang='en' wait='60' hold='1' window='5' content='text/xml; charset=utf-8' ver='1.6' xmpp:version='1.0' xmlns:xmpp='urn:xmpp:xbosh'/> and the server responds with <body xmlns='http://jabber.org/protocol/httpbind' sid='f89bf034b02fa6b884bb0c55be3f1f69e45e3866' wait='60' requests='2' inactivity='30' maxpause='120' polling='2' ver='1.8' from='thisislove-macbook-2.local' secure='true' authid='353072658' xmlns:xmpp='urn:xmpp:xbosh' xmlns:stream='http://etherx.jabber.org/streams' xmpp:version='1.0'><stream:features xmlns:stream='http://etherx.jabber.org/streams'><mechanisms xmlns='urn:ietf:params:xml:ns:xmpp-sasl'><mechanism>DIGEST-MD5</mechanism><mechanism>PLAIN</mechanism></mechanisms><register xmlns='http://jabber.org/features/iq-register'/></stream:features></body> Notice the mechanisms, DIGEST-MD5 & PLAIN. If I'm not mistaken it should have ANONYMOUS as a mechanism as well. So what happens is that speeqe simply terminates the connection. As such I'm thinking i must be missing something in the anonymous configuration or the muc config. In the mod_muc configg, I have {mod_muc, [ %%{host, "conference.@HOST@"}, {access, muc}, {access_create, muc}, {access_persistent, muc}, {access_admin, muc_admin}, {max_room_name, 190}, {max_room_desc, 190}, {max_users, 500} ]} So what am I missing? Thanks

  Read the article

• Agile web development with rails

  - by Steve

  Hi.. This code is from the agile web development with rails book.. I don't understand this part of the code... User is a model which has name,hashed_password,salt as its fields. But in the code they are mentioning about password and password confirmation, while there are no such fields in the model. Model has only hashed_password. I am sure mistake is with me. Please clear this for me :) User Model has name,hashed_password,salt. All the fields are strings require 'digest/sha1' class User < ActiveRecord::Base validates_presence_of :name validates_uniqueness_of :name attr_accessor :password_confirmation validates_confirmation_of :password validate :password_non_blank def self.authenticate(name, password) user = self.find_by_name(name) if user expected_password = encrypted_password(password, user.salt) if user.hashed_password != expected_password user = nil end end user end def password @password end def password=(pwd) @password = pwd return if pwd.blank? create_new_salt self.hashed_password = User.encrypted_password(self.password, self.salt) end private def password_non_blank errors.add(:password,"Missing password")if hashed_password.blank? end def create_new_salt self.salt = self.object_id.to_s + rand.to_s end def self.encrypted_password(password, salt) string_to_hash = password + "wibble" + salt Digest::SHA1.hexdigest(string_to_hash) end end

  Read the article

• Archbeat Link-O-Rama Top 10 Facebook Faves for October 20-26, 2013

  - by OTN ArchBeat

  Here's this week's list of the Top 10 items shared on the OTN ArchBeat Facebook Page from October 27 - November 2, 2013. Visualizing and Process (Twitter) Events in Real Time with Oracle Coherence | Noah Arliss This OTN Virtual Developer Day session explores in detail how to create a dynamic HTML5 Web application that interacts with Oracle Coherence as it’s processing events in real time, using the Avatar project and Oracle Coherence’s Live Events feature. Part of OTN Virtual Developer Day: Harnessing the Power of Oracle WebLogic and Oracle Coherence, November 5, 2013. 9am to 1pm PT / 12pm to 4pm ET / 1pm to 5pm BRT. Register now! HTML5 Application Development with Oracle WebLogic Server | Doug Clarke This free OTN Virtual Developer Day session covers the support for WebSockets, RESTful data services, and JSON infrastructure available in Oracle WebLogic Server. Part of OTN Virtual Developer Day: Harnessing the Power of Oracle WebLogic and Oracle Coherence, November 5, 2013. 9am to 1pm PT / 12pm to 4pm ET / 1pm to 5pm BRT. Register now! Video: ADF BC and REST services | Frederic Desbiens Spend a few minutes with Oracle ADF principal product manager Frederic Desbiens and learn how to publish ADF Business Components as RESTful web services. One Client Two Clusters | David Felcey "Sometimes its desirable to have a client connect to multiple clusters, either because the data is dispersed or for instance the clusters are in different locations for high availability," says David Felcey. David shows you how in this post, which includes a simple example. Exceptions Handling and Notifications in ODI | Christophe Dupupet Oracle Fusion Middleware A-Team director Christophe Dupupet reviews the techniques that are available in Oracle Data Integrator to guarantee that the appropriate individuals are notified in the event that ODI processes are impacted by network outages or other mishaps. Securing WebSocket applications on Glassfish | Pavel Bucek WebSocket is a key capability standardized into Java EE 7. Many developers wonder how WebSockets can be secured. One very nice characteristic for WebSocket is that it in fact completely piggybacks on HTTP. In this post Pavel Bucek demonstrates how to secure WebSocket endpoints in GlassFish using TLS/SSL. Oracle Coherence, Split-Brain and Recovery Protocols In Detail | Ricardo Ferreira Ricardo Ferreira's article "provides a high level conceptual overview of Split-Brain scenarios in distributed systems," focusing on a "specific example of cluster communication failure and recovery in Oracle Coherence." Non-programmatic Authentication Using Login Form in JSF (For WebCenter & ADF) | JayJay Zheng Oracle ACE JayJay Zheng shares an approach that "avoids the programmatic authentication and works great for having a custom login page developed in WebCenter Portal integrated with OAM authentication." The latest article in the Industrial SOA series looks at mobile computing and how companies are developing SOA to go. http://pub.vitrue.com/PUxT Tech Article: SOA in Real Life: Mobile Solutions The ACE Director Thing | Dr. Frank Munz Frank Munz finally gets around to blogging about achieving Oracle ACE Director status and shares some interesting insight into what will change—and what won't—thanks to that new status. A good, short read for those interested in learning more about the Oracle ACE program. Thought for the Day "Even if you're on the right track, you'll get run over if you just sit there." — Will Rogers, American humorist (November 4, 1879 – August 15, 1935) Source: brainyquote.com

  Read the article

• Joy! | Important Information About Your iPad 3G

  - by Jeff Julian

  Looks like I was one of the lucky 114,000 who AT&T lost their email to “hackers”.  Why is “hackers” in “double quotes”.  I can just imagine some executive at AT&T in their “Oh No, We Messed Up Meeting” saying, what happened?  Then someone replied, well we have had a breach and “hackers” broke in (using the quote in the air gesture) and stole our iPad 3G customers emails. Oh well, I am sure my email has been sold and sold again by many different vendors, why not AT&T now.  At least Dorothy Attwood could have gave us her email to give to someone else instead of blinking it through a newsletter system. June 13, 2010 Dear Valued AT&T Customer, Recently there was an issue that affected some of our customers with AT&T 3G service for iPad resulting in the release of their customer email addresses. I am writing to let you know that no other information was exposed and the matter has been resolved.  We apologize for the incident and any inconvenience it may have caused. Rest assured, you can continue to use your AT&T 3G service on your iPad with confidence. Here’s some additional detail: On June 7 we learned that unauthorized computer “hackers” maliciously exploited a function designed to make your iPad log-in process faster by pre-populating an AT&T authentication page with the email address you used to register your iPad for 3G service.  The self-described hackers wrote software code to randomly generate numbers that mimicked serial numbers of the AT&T SIM card for iPad – called the integrated circuit card identification (ICC-ID) – and repeatedly queried an AT&T web address.   When a number generated by the hackers matched an actual ICC-ID, the authentication page log-in screen was returned to the hackers with the email address associated with the ICC-ID already populated on the log-in screen. The hackers deliberately went to great efforts with a random program to extract possible ICC-IDs and capture customer email addresses.  They then put together a list of these emails and distributed it for their own publicity. As soon as we became aware of this situation, we took swift action to prevent any further unauthorized exposure of customer email addresses.  Within hours, AT&T disabled the mechanism that automatically populated the email address. Now, the authentication page log-in screen requires the user to enter both their email address and their password. I want to assure you that the email address and ICC-ID were the only information that was accessible. Your password, account information, the contents of your email, and any other personal information were never at risk.  The hackers never had access to AT&T communications or data networks, or your iPad.  AT&T 3G service for other mobile devices was not affected. While the attack was limited to email address and ICC-ID data, we encourage you to be alert to scams that could attempt to use this information to obtain other data or send you unwanted email. You can learn more about phishing by visiting the AT&T website. AT&T takes your privacy seriously and does not tolerate unauthorized access to its customers’ information or company websites.   We will cooperate with law enforcement in any investigation of unauthorized system access and to prosecute violators to the fullest extent of the law. AT&T acted quickly to protect your information – and we promise to keep working around the clock to keep your information safe.  Thank you very much for your understanding, and for being an AT&T customer. Sincerely, Dorothy Attwood Senior Vice President, Public Policy and Chief Privacy Officer for AT&T Technorati Tags: AT&T,iPad 3G,Email

  Read the article

• The endpoint reference (EPR) for the Operation not found is

  - by Denise Wu

  I have been struggling with the following error the last couple of days can you please help! I generated my server and client code using the wsdl2java tool from a wsdl 2.0 file. When invoking the webservice I am getting the following error: org.apache.axis2.AxisFault: The endpoint reference (EPR) for the Operation not found is /axis2/services/MyService/authentication/?username=Denise345&password=xxxxx and the WSA Action = null My service is displayed on the axis2 webpage with all available methods. Here is the output from TcpMon ============== Listen Port: 8090 Target Host: 127.0.0.1 Target Port: 8080 ==== Request ==== GET /axis2/services/MyService/authentication/?username=Denise345&password=xxxxx HTTP/1.1 Content-Type: application/x-www-form-urlencoded; charset=UTF-8 SOAPAction: "" User-Agent: Axis2 Host: 127.0.0.1:8090 ==== Response ==== HTTP/1.1 500 Internal Server Error Server: Apache-Coyote/1.1 Content-Type: application/xml;charset=UTF-8 Transfer-Encoding: chunked Date: Thu, 12 May 2011 15:53:20 GMT Connection: close 12b <soapenv:Reason xmlns:soapenv="http://www.w3.org/2003/05/soap-envelope"> <soapenv:Text xml:lang="en-US">The endpoint reference (EPR) for the Operation not found is /axis2/services/MyService/authentication/?username=Denise345&password=xxxxx and the WSA Action = null</soapenv:Text></soapenv:Reason> 0 ============== I am using: * axis2-1.5.4 * Tomcat 7.0.8 * wsdl 2.0 file Please help!

  Read the article

• Silverlight 4 - MVC 2 ASP.NET Membership integration "single sign on"

  - by Scrappydog

  Scenario: I have an ASP.NET MVC 2 site using ASP.NET Forms Authentication. The site includes a Silverlight 4 application that needs to securely call internal web services. The web services also need to be publically exposed for third party authenticated access. Challenges: Securely accessing webservices from Silverlight using the current users identity without requiring the user to re-login in in the Silverlight application. Providing a secure way for third party applications to access the same webservices the same users credentials, ideally with out using ASP.NET Forms Authentication. Additional details and limitations: This application is hosted in Azure. We would rather NOT use RIA Services if at all possible. Solutions Under Consideration: I think that if the webservices are part of the same MVC site that hosts the Silverlight application then forms authentication should probably "just work" from Silverlight based on the users forms auth cookies. But this seems to rule out the possibility of hosting the webservices seperately (which is desirable in our scenario). For third-party access to the web services I'm guessing that seperate endpoints with a different authenication solution is probably the right answer, but I would rather only support one version of the services if possible... Questions: Can anybody point me towards any sample applications that implements something like this? How would you recommend implementing this solution?

  Read the article

• how to run pentaho bi-server on CentOS 6.2 and PostgreSQL 8.4.x?

  - by gtludwig

  I'm trying to run an instance of Pentaho's bi-server-ce on a freshly installed CentOS 6.2 using PostgreSQL 8.4.x. I've installed a JDK 1.6 instance and it is working. Also I've a tomcat 6.0.35 instance where I run a few apps. I'd like bi-server to be one of many apps I run on this tomcat. Regarding Pentaho's Bi-Server installation I'm following the guide from https://docs.google.com/document/edit?id=1OnvHYsa-nYgwP8bjqRqjP5Vy-gLI5xomOHZtOvA00Ns#bookmark=id.2d95068df264 I've adapted the steps to my local installation, but still I can't start the server. I get the following error when trying to start the pentaho app: Jul 23, 2012 12:00:30 PM org.apache.catalina.startup.ContextConfig validateSecurityRoles INFO: WARNING: Security role name PENTAHO_ADMIN used in an without being defined in a 12:00:31,953 ERROR [JDBCExceptionReporter] FATAL: Ident authentication failed for user "hibuser" 12:00:32,222 ERROR [JDBCExceptionReporter] FATAL: Ident authentication failed for user "hibuser" 12:00:32,223 ERROR [SchemaUpdate] could not get database metadata org.postgresql.util.PSQLException: FATAL: Ident authentication failed for user "hibuser" (...) I do believe it's something related to the postgre user hibuser, but all settings on all files seem to be OK. Also I've a copy of the postgresql jar driver on tomcat's /lib folder. I've run out of ideas, can anyone throw me light here?

  Read the article

< Previous Page | 102 103 104 105 106 107 108 109 110 111 112 113  | Next Page >