Search Results

Search found 5685 results on 228 pages for 'encrypted partition'.

Page 106/228 | < Previous Page | 102 103 104 105 106 107 108 109 110 111 112 113  | Next Page >

• Restoring the exact state of a linux install to a different laptop with different sized drives and other hardware

  - by user259774

  I have an IBM running a Manjaro install that has already been used and settled into, with packages installed, browser profiles, etc, etc. The drive is 60gb, and it has a swap partition and an ext4 root partition. I need to move this profile to a Toshiba computer with a 320gb drive. How should I go about this? My inclination would be to shut down the toshiba, boot a live linux system, dd the whole 60gb drive to a file, boot the toshiba to a live system, then dd the file to its 320gb drive. Would this work? I know that it wouldn't with windows, but I believe this is an artificially imposed limitation from Microsoft. Is this correct, or is Linux similarly limited? If not, how could I go about this? Would clonezilla work, or would the hardware disparities prevent it from working?

  Read the article

• Asus AT3-IONT & Win XP [closed]

  - by user59178

  Hello! I'm trying to install Windows XP on my nettop (Asus AT3-IONT motherboard). There is a problem - when the progress comes to partition selection, it sees all the partitions on the hard drive, but when I'm selecting any partition, it says that it's not compatible with Windows XP. Windows 7 was installed without any problems, but XP and 2003 R2 have this problem. How can I solve it? P.S. I already have Windows 7, I need exactly XP or 2003 for my work. Thanks.

  Read the article

• How to format HDD with MHDD Tool.

  - by PP

  I have copied MHDD application on a bootable CD and i wan to use it to low level format my HDD which had some bad sectors on it. so how can mark these badsecotrs using MHDD application? Pluse can i partition/format my HDD using MHDD because after low level format i want to setup window xp on that drive. can some one explain me step by step procedure to how to lovel format driven and partition/format it and then setup xp on that. Link to MHDD app. http://hddguru.com/content/en/software/2005.10.02-MHDD/ Thanks, PP.

  Read the article

• There are no drives listed during windows 7 system recovery

  - by Kragen

  I'm trying to use the Windows 7 system recovery disk to repair a boot sector, however I'm finding that when I boot the recovery disk, it doesn't list / mount any of my disk partitions, and so I can't perform the recovery. The partitions are all NTFS formatted, and the drivers used to read the disks all seem to be fairly straightforward Microsoft drivers, so I shouldn't need to load any extra drivers to see my partitions (its a Dell Latitude D530) Diskpart correctly lists the partitions (complete with labels) - it just that when I attempt to switch to that partition it gives me the "This partition does not contain a recognised file system" message. Has anyone got any idea how I can work out why my partitions are not visible?

  Read the article

• Creating a USB stick for installing centos 6.x using DVD1 and DVD2 iso files

  - by user250563

  First, we create 2 partitions on the USB stick that is let's say 16GB. first partition is let's say only 1GB and the second partition is the rest of what is available. after we "w" write the changes, the USB now has 2 partitions. 1 is 1GB 1 is more than 14GB so , we have... sdb1 and sdb2 now. now we need to turn these partitions into filesystems some say i should run these commands after those procedures. mkfs.vfat -F 32 /dev/sdb1 mkfs.ext3 /dev/sdb2 but some web pages recommend using: mkfs.vfat -n BOOT /dev/sdb1 mkfs.ext2 -m 0 -b 4096 -L DATA /dev/sdb2 which is it? so let's say the DVDs are called: CentOS-6.4-x86_64-bin-DVD1.iso CentOS-6.4-x86_64-bin-DVD2.iso so we make a directory: mkdir -p /mnt/dvd1 and then mount it: mount -o loop CentOS-6.4-x86_64-bin-DVD1.iso /mnt/dvd1 and i suppose we don't make a directory for dvd2 and we don't have to mount it ? at this point i do not know what should be done. but i think this step might be next: we make the USB bootable by finding the file named mbr.bin and then moving it to there via these commnad. dd conv=notrunc bs=440 count=1 if=/usr/lib/syslinux/mbr.bin of=/dev/sdb parted /dev/sdb set 1 boot on in other words we are "dd-ing it to 'sdb' not sdb1' or 'sdb2'. and then we use parted to set the boot to on for sdb so far everything looks good? here is the confusing parts.. how exactly do i move these iso files to the usb drive? EVERYTHING BELOW IS A GUESS. so at this point i should copy the folder /mnt/dvd1/isolinux to usb's sdb1 or sdb2 ? rename it to syslinux ? and then inside this syslinux folder there will be a file called... isolinux.cfg ? which should be renamed to syslinux.cfg ? and then copy the contents of /mnt/dvd1/images/* to USB's sdb2 ? but i think i am also suppose to copy and paste the both CentOS-6.4-x86_64-bin-DVD1.iso CentOS-6.4-x86_64-bin-DVD2.iso somewhere into this USB's sdb2 partition, correct ? almost like a drag and drop kind of a thing? or do they go into any folders ? centos' own web site has some instructions but those instructions do not work. http://wiki.centos.org/HowTos/InstallFromUSBkey i once got this working but things got ruined, i have to do it again and this time take notes.

  Read the article

• TrueCrypt & upgrading your hard drive?

  - by Danielb

  I currently use TrueCrypt to encrypt the hard drive in a Win7 laptop (everything in a single partition). I am looking to upgrade the hard drive to a model with significantly more storage capacity. I've had a look through the documentation but I couldn't see anything about this particular scenario. I assume I need to do something like the following: Remove the encryption from the existing drive. Clone the existing drive image onto the new hard drive. Physically install the new drive into the laptop. Resize the single partition to use all the space in the new drive. Encrypt all of the new bigger drive with TrueCrypt.

  Read the article

• Raid 5 GPT Partitioning

  - by user39325

  Hi, i have a Dell Poweredge r710 server with five 1 TB disks. All of them are in RAID 5. I was trying to install Centos but it sais "Your boot partition is on disk using GPT Partition...". I read somewhere that centos cant install on 2TB disk, so i made some partiotions smaller, but it's not workin. any idea? p.s. i am going to install Proxmox on that, but Proxmox same doesnt accept 2TB disks...

  Read the article

• Adding Ubuntu installation to VIsta boot loader

  - by frapfap

  Hi, I had a Vista partition and created a partition and installed Ubuntu 9.10. During the Ubuntu installation I unchecked "Install Boot Loader" so it didn't install the GRUB bootloader. I wanted to keep Vistas boot loader so I could manage it within Vista as I know you can - Ive just forgot where in the Control Panel you do it! Anyway for some reason I incorrectly assumed that the Ubuntu entry would be added to the Vista boot loader. How do enable to choose which OS to use during booting up the computer as at the moment it just automatically loads Vista? Apologies if I'm technically incorrect - what I explained is what I thought was going on!! Thanks.

  Read the article

• Can't use sudo on ubuntu

  - by martin.malek

  After update and reboot I get 'user is not in the sudoers file. This incident will be reported.' when trying to call sudo. The problem is that I don't have a GRUB with revovery option. I try to boot from live cd but I'm not able to access the system partition, only the partition with grub. Can I somehow enable the recovery mode in GRUB? Or boot throw the live CD from first hard drive with some option for that?

  Read the article

• Lenovo B460e laptop Unknown filesystem

  - by Dinesh

  I got a Lenovo B460e laptop yesterday (given by the TN Govt). It has WINDOWS 7 Pro Set it up the way I liked it... all software drivers and all. I wanted extra drives, so I entered the WINDOWS diskadmin and changed my partition setup, by splitting and I did the partition setup in the installing proces, so I split my harddisk into 4 parts. So far so good. When I rebooted, I entered GRUB RESCUE MODE. In this mode I know the only command “ls”. Which gives like (hd0) (hd0,msdos5) (hd0,msdos4) (hd0,msdos2) (hd0,msdos1). This Lap does not have a CD drive, otherwise I could have formatted the OS and installed a new OS using WINDOWS 7 CD. Now I don’t know what I’m supposed to do. Any idea on how to fix this?

  Read the article

• installing linux on a mac

  - by Ahmet vardar

  Hi, i have mac pro and i wanted to install debian on it but i guess i have problem now. i have windows 7 installed on bootcamp partition, before i started installing linux, i created a partition size of 75 gb then i restarted mac and boot it from debian dvd. then i divided that 75 gb to 2 partitions, one is 600 mb freespace other is ext3 formatted. i installed debian (but it just used 1 dvd even though i got 5 dvd downloaded) then mac restarted. but now i cannot even see windows on bootlist. it just let me boot in mac os x now. how can i fix this? thanks

  Read the article

• How to view bad blocks on mounted ext3 filesystem?

  - by Basilevs

  I've ran fsck -c on the (unmounted) partition in question a while ago. The process was unattended and results were not stored anywhere (except badblock inode). Now I'd like to get badblock information to know if there are any problems with the harddrive. Unfortunately, partition is used in the production system and can't be unmounted. I see two ways to get what I want: Run badblocks in read-only mode. This will probably take a lot of time and cause unnecessary bruden on the system. Somehow extract information about badblocks from the filesystem iteself. How can I view known badblocks registered in mounted filesystem?

  Read the article

• After upgrading to Mac OS X Lion, I can't boot Windows anymore

  - by J. Pablo Fernández

  I upgraded to Mac OS X Lion and I can't run the installed Windows anymore. It seems the issue is that the Lion installation created extra partitions so the Windows partition has a different number one. It's disk0s4 instead of disk0s3 (if I recall correctly). Searching online found several discussions about it but only one with a proposed solution, https://discussions.apple.com/thread/3199099, essentially: bootrec.exe /FixMbr bootrec.exe /FixBoot bootrec.exe /RebuildBcd which didn't work. bootrec.exe /FixBoot claims that no windows partition has been found.

  Read the article

• Lenova B460e laptop Unknown filesystem

  - by Dinesh

  I got Lenova B460e laptop yesterday (by TN Govt). It has WINDOWS 7 Proff….. Setup it up the way I liked it... all software drivers and all. I wanted extra drives, so I entered the WINDOWS diskadmin and changed my partition setup, by splitting and I did the partition setup in the installing proces, so I splitted my harddisk into 4 parts. So far so good. When I rebooted, I entered GRUB RESCUE MODE. In this mode I know the only command “ls”. Which gives like (hd0) (hd0,msdos5) (hd0,msdos4) (hd0,msdos2) (hd0,msdos1). In this Lap I do not have CD drive also, otherwise I could have done Format the OS and installed new OS using WINDOWS 7 CD. Now I don’t know what I’m supposed to do. Anyone an idea how to fix this?

  Read the article

• Prevent Windows 7 prompt format USB HDD

  - by mike

  I am running Windows 7. I have a USB HDD 100% formatted with a Trucypt partition. When I insert the drive into my system, Windows asks if I would like to format the drive, each time I insert the drive. So how do I turn this prompt off? If so, I would prefer it be applied globally (e.g. no more prompts for any other drives). Since its an invisible partition unless mounted with Trucypt, Windows is always going to think nothing is there and continue to prompt me. I don't want to hit enter on the keyboard a few times by mistake doing something else and have it to go through the process. I'll lose everything. It is all backed up BTW. Will just be inconvienient.

  Read the article

• Arch linux ati graphics crash after grub install

  - by Jay

  Ok, so I've had an arch linux w/ gnome 3 installed for a while now. And a while ago I installed ubuntu as another partition, I think to fix an issue that cause arch to fail. So, it was all working fine, but then I went and reinstalled grub 1 on the arch partition; Ubuntu had overwritten it on the install. Then when I tried to boot into arch it booted, but the graphics wasn't working correctly: gdm wouldn't even show, and there were weird colors instead. So, I uninstalled xf86-video-ati and then installed xf86-video-vesa. That made gdm run in fallback mode and I was able to boot to gnome 3 fallback mode (or whatever it's called). But I can't seem to get the graphics working correctly.

  Read the article

• Clonezilla multiple disks restore to single disk

  - by Farseeker

  I have a clonezilla image from a machine that had 3 seperate disks (one partition per disk). I want to know if I can restore that image to another computer that has a hard drive that's much larger than the original, but only has one drive. Clonezilla is stating that it can't do this automatically, and perhaps I should try cnvt-ocs-dev but I've no idea what that means (Google is less than forthcoming with information about it too). Ok so I found out what cnvt-ocs-dev is, and that allows me to move source/destination targets between physical disks, but it doesn't seem to be able to move the partition as well.

  Read the article

• dd clone hard drive: Input/Output Error though "chkdsk" says OK

  - by unknown (google)

  Hi, I've used dd to clone hard drives before using 'dd' and a live cd, but have run into a problem. The issue: dd fails with an "Input/Output Error" on /dev/sda3 , even though windows "check disk" (chkdsk) says it's ok. Context: Trying to replace my laptop hard drive w/ a faster one of the same size Laptop has NTFS on a 320gb hard drive Booting into knoppix Knoppix recognizes 'original' drive (/dev/sda) I am using a usb connection for ‘new' drive (irrelevant, but just an fyi) Knoppix recognizes the usb drive as /dev/sdb Using dd, as follows: dd if=/dev/sda of=/dev/sdb "dd" gives the I/O error above at 82Gb (out of 320Gb) I then tried checking each partition as follows and found it failed on /dev/sda3: dd if=/dev/sda1 of=/dev/null dd if=/dev/sda2 of=/dev/null dd if=/dev/sda3 of=/dev/null I have ran windows xp chkdsk on the offending drive in both "find only" and "find and fix" mode and it reports no errors Question How can I find and fix the error on my original hard drive partition (i.e. /dev/sda3) so that dd reads it successfully?

  Read the article

• Installing Domain Controller on Hyper-V Host

  - by MichaelGG

  Given a resource limited setup consisting of 2 host machines (HyperV-01 and HyperV-02), is it OK to put the domain controllers in parent partition, instead of their own VM? The main reason is that if the DCs go into a child partition, starting from cold on both machines could lead to a bit of an issue, as there'd be no DCs around until well after both parents have booted. I'm guessing this might cause undesirable effects. Am I correct to be worried about joining the host systems to a domain that's only on VMs? The biggest drawback I've heard so far is that if AD gets heavily used, its resources could cut into HyperV's. I'm not concerned about that for this deployment. Any other suggestions? (Besides finding a 3rd machine and running AD on it.)

  Read the article

• Use one home directory for more than one operating system

  - by Just Jake

  I want to configure the same user account across multiple operating systems. Right now, I'm set up for general use in Mac OS 10.6.6 "Snow Leopard," and I have about 200gb of files in my home directory (/Users/justjake/). I want to use this user (and home directory) for other operating systems on other partitions. For example, I have Mac OS 10.5 installed on a 12gb partition. How can I share permissions, user accounts across my two operating systems? Would moving the my /Users directory from 10.6 to it's own partition then mounting it using /etc/fstab solve my issue?

  Read the article

• Error when running adprep32 /rodcprep, trying to add a 2008 domain controller to a 2003 domain

  - by virtuist

  I'm trying to migrate a Small Business Server 2003 to Server 2008 domain. The problem is when I run the adprep32 /rodcprep command as specified as the final step in Step 3 of this article: http://www.experts-exchange.com/Software/Server_Software/Email_Servers/Exchange/A_2881-Migrate-Small-Business-Server-2003-to-Exchange-2010-and-Windows-2008-R2.html I get an error "Adprep could not contact a replica for partition..." which is described in detail here: http://support.microsoft.com/kb/949257 I've also attached the AdPrep.log file for full details. So when I try to run DCPromo on my new Server 2008 PDC (it's not the PDC yet, but want it to be soon), I get an error saying that /rodcprep hasn't ran so there could be errors if I continue. Anyone ran into this or have any suggestions on how to help? Can Dsmgmt be ran on server 2003 to help solve this? Assuming it's a partition error.

  Read the article

• Extending C drive not possible

  - by gokul

  This is my computer partition list. You can see my C drive is running very low on disk space. I wanted to extend my disk space, so I used mmc Disk managment to shrink a volume, but I can't extend it to the C drive because the extended volume in dropdown list of C is not clickable. I've tried many packages, but none were able to do it. My C drive is simple, basic, NTFS, healthy (boot, crash dump, primary partition). The MMC Windows: What should I do?

  Read the article

• CentOS - Add additional hard drive raid arrays on Dell Perc 5/i card

  - by Quanano

  We have a Dell Poweredge 2900 system with Dell Perc 5/i card and 4 SAS hard drives attached, with NTFS partitions on them. We installed CentOS on one raid array on this controller with a different controller and it is working fine. We are now trying to access the drives shown above and they are not being shown in /dev as sdb, etc. sda is the drive that we installed centos on and it has sda1, sda2, sda3, etc. The CDROM has been picked up as well. If I scan for scsi devices then the perc and adaptec controllers are both found. sg0 is the CDROM and sg2 is the centos installed, however I think sg1 is the other drive but I cannot see anyway to mount the partitions, as only the drive is listed in /dev. Thanks. EXTRA INFO fdisk -l: Disk /dev/sda: 72.7 GB, 72746008576 bytes 255 heads, 63 sectors/track, 8844 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x11e3119f Device Boot Start End Blocks Id System /dev/sda1 * 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 64 8845 70528000 8e Linux LVM Disk /dev/mapper/vg_lal2server-lv_root: 34.4 GB, 34431041536 bytes 255 heads, 63 sectors/track, 4186 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_root doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_swap: 21.1 GB, 21139292160 bytes 255 heads, 63 sectors/track, 2570 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_swap doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_home: 16.6 GB, 16647192576 bytes 255 heads, 63 sectors/track, 2023 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_home doesn't contain a valid partition table These are all from the install hdd not the additional hard drives modprobe a320raid FATAL: Module a320raid not found. lsscsi -v: [0:0:0:0] cd/dvd TSSTcorp CDRWDVD TS-H492C DE02 /dev/sr0 dir: /sys/bus/scsi/devices/0:0:0:0 [/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0] [4:0:10:0] enclosu DP BACKPLANE 1.05 - dir: /sys/bus/scsi/devices/4:0:10:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:0:10/4:0:10:0] [4:2:0:0] disk DELL PERC 5/i 1.03 /dev/sda dir: /sys/bus/scsi/devices/4:2:0:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:2:0/4:2:0:0] . lsmod: Module Size Used by fuse 66285 0 des_generic 16604 0 ecb 2209 0 md4 3461 0 nls_utf8 1455 0 cifs 278370 0 autofs4 26888 4 ipt_REJECT 2383 0 ip6t_REJECT 4628 2 nf_conntrack_ipv6 8748 2 nf_defrag_ipv6 12182 1 nf_conntrack_ipv6 xt_state 1492 2 nf_conntrack 79453 2 nf_conntrack_ipv6,xt_state ip6table_filter 2889 1 ip6_tables 19458 1 ip6table_filter ipv6 322029 31 ip6t_REJECT,nf_conntrack_ipv6,nf_defrag_ipv6 bnx2 79618 0 ses 6859 0 enclosure 8395 1 ses dcdbas 9219 0 serio_raw 4818 0 sg 30124 0 iTCO_wdt 13662 0 iTCO_vendor_support 3088 1 iTCO_wdt i5000_edac 8867 0 edac_core 46773 3 i5000_edac i5k_amb 5105 0 shpchp 33482 0 ext4 364410 3 mbcache 8144 1 ext4 jbd2 88738 1 ext4 sd_mod 39488 3 crc_t10dif 1541 1 sd_mod sr_mod 16228 0 cdrom 39771 1 sr_mod megaraid_sas 77090 2 aic79xx 129492 0 scsi_transport_spi 26151 1 aic79xx pata_acpi 3701 0 ata_generic 3837 0 ata_piix 22846 0 radeon 1023359 1 ttm 70328 1 radeon drm_kms_helper 33236 1 radeon drm 230675 3 radeon,ttm,drm_kms_helper i2c_algo_bit 5762 1 radeon i2c_core 31276 4 radeon,drm_kms_helper,drm,i2c_algo_bit dm_mirror 14101 0 dm_region_hash 12170 1 dm_mirror dm_log 10122 2 dm_mirror,dm_region_hash dm_mod 81500 11 dm_mirror,dm_log blkid: /dev/sda1: UUID="bc4777d9-ae2c-4c58-96ea-cedb342b8338" TYPE="ext4" /dev/sda2: UUID="j2wRZr-Mlko-QWBR-BndC-V2uN-vdhO-iKCuYu" TYPE="LVM2_member" /dev/mapper/vg_lal2server-lv_root: UUID="9238208a-1daf-4c3c-aa9b-469f0387ebee" TYPE="ext4" /dev/mapper/vg_lal2server-lv_swap: UUID="dbefb39c-5871-4bc9-b767-1ef18f12bd3d" TYPE="swap" /dev/mapper/vg_lal2server-lv_home: UUID="ec698993-08b7-443e-84f0-9f9cb31c5da8" TYPE="ext4" dmesg shows: megaraid_sas: fw state:c0000000 megasas: fwstate:c0000000, dis_OCR=0 scsi2 : LSI SAS based MegaRAID driver scsi 2:0:0:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:1:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:2:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:3:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:4:0: Direct-Access HITACHI HUS154545VLS300 D590 PQ: 0 ANSI: 5 scsi 2:0:5:0: Direct-Access HITACHI HUS154545VLS300 D590 PQ: 0 ANSI: 5 scsi 2:0:8:0: Direct-Access FUJITSU MBA3073RC D305 PQ: 0 ANSI: 5 scsi 2:0:9:0: Direct-Access FUJITSU MBA3073RC D305 PQ: 0 ANSI: 5 i.e. the 3 RAID Arrays Seagate Hitatchi and Fujitsu hard drives respectively. FURTHER UPDATE I have installed the megaraid storage manager console and connected to the server. It appears that the two CentOS installation hard drives are OK. The other 6 drives, one raid array of 4 and one raid array of 2 disks. The other drives are listed as (Foreign) Unconfigured Good.

  Read the article

• How to install OSX into VirtualBox on a Macbook Air using Apple's Reinstall USB

  - by eug

  I'm currently dual-booting OSX and Ubuntu on my Macbook Air, but it'd be nice to run OSX within Ubuntu via VirtualBox. This seems possible using VirtualBox and is legal - there's even a post on an Oracle blog describing this: http://blogs.oracle.com/karim/entry/installing_mac_os_x_in. Actually, I've read elsewhere that it's only legal with OSX Server, but can't find a reason why it'd be illegal with normal OSX - please let me know if you think otherwise. The problem I have is that a MacBook Air doesn't come with a bootable DVD, but with a "Reinstall Drive" which is a USB stick that comes up as a CDROM drive. It doesn't seem to be ISO9660-formatted though but has an Apple partition table, with OSX installed on an HFS partition. refit says that it has a "boot.efi" as well. I don't know Apple booting/partitioning very well and would really appreciate some advice on how to convert this USB into an ISO or boot it in VirtualBox some other way.

  Read the article

• dragonflyBSD NFS server and windows 2008 client promission deny

  - by altman

  I have setup a dragonflyBSD NFS server and a windows 2008 NFS client(it's in the linux-KVM). The dragonflyBSD exports file like this: /tank -mapall=root windows-client and i setup my windows 2008 a NFS client all right. There is my win cmd to mount NFS. mount \\dragonfly-server\tank e:\ After finished my configuration. I found the windows client can mount the remote tank partition. And i can create a file or a dir. But when i try to delete the file i just create. It alerts permission deny. You must have the permission.And the same result when i try to write to the text i create in the NFS partition I don't know why i just can create the file through NFS, but can't do any thing else. Is there any body can help?

  Read the article

< Previous Page | 102 103 104 105 106 107 108 109 110 111 112 113  | Next Page >