Search Results

Search found 8189 results on 328 pages for 'fedora 16'.

Page 106/328 | < Previous Page | 102 103 104 105 106 107 108 109 110 111 112 113  | Next Page >

• Bitmask data insertions in SSDT Post-Deployment scripts

  - by jamiet

  On my current project we are using SQL Server Data Tools (SSDT) to manage our database schema and one of the tasks we need to do often is insert data into that schema once deployed; the typical method employed to do this is to leverage Post-Deployment scripts and that is exactly what we are doing. Our requirement is a little different though, our data is split up into various buckets that we need to selectively deploy on a case-by-case basis. I was going to use a SQLCMD variable for each bucket (defaulted to some value other than “Yes”) to define whether it should be deployed or not so we could use something like this in our Post-Deployment script: IF ($(DeployBucket1Flag) = 'Yes')BEGIN   :r .\Bucket1.data.sqlENDIF ($(DeployBucket2Flag) = 'Yes')BEGIN   :r .\Bucket2.data.sqlENDIF ($(DeployBucket3Flag) = 'Yes')BEGIN   :r .\Bucket3.data.sqlEND That works fine and is, I’m sure, a very common technique for doing this. It is however slightly ugly because we have to litter our deployment with various SQLCMD variables. My colleague James Rowland-Jones (whom I’m sure many of you know) suggested another technique – bitmasks. I won’t go into detail about how this works (James has already done that at Using a Bitmask - a practical example) but I’ll summarise by saying that you can deploy different combinations of the buckets simply by supplying a different numerical value for a single SQLCMD variable. Each bit of that value’s binary representation signifies whether a particular bucket should be deployed or not. This is better demonstrated using the following simple script (which can be easily leveraged inside your Post-Deployment scripts): /* $(DeployData) is a SQLCMD variable that would, if you were using this in SSDT, be declared in the SQLCMD variables section of your project file. It should contain a numerical value, defaulted to 0. In this example I have declared it using a :setvar statement. Test the affect of different values by changing the :setvar statement accordingly. Examples: :setvar DeployData 1 will deploy bucket 1 :setvar DeployData 2 will deploy bucket 2 :setvar DeployData 3   will deploy buckets 1 & 2 :setvar DeployData 6   will deploy buckets 2 & 3 :setvar DeployData 31  will deploy buckets 1, 2, 3, 4 & 5 */ :setvar DeployData 0 DECLARE  @bitmask VARBINARY(MAX) = CONVERT(VARBINARY,$(DeployData)); IF (@bitmask & 1 = 1) BEGIN     PRINT 'Bucket 1 insertions'; END IF (@bitmask & 2 = 2) BEGIN     PRINT 'Bucket 2 insertions'; END IF (@bitmask & 4 = 4) BEGIN     PRINT 'Bucket 3 insertions'; END IF (@bitmask & 8 = 8) BEGIN     PRINT 'Bucket 4 insertions'; END IF (@bitmask & 16 = 16) BEGIN     PRINT 'Bucket 5 insertions'; END An example of running this using DeployData=6 The binary representation of 6 is 110. The second and third significant bits of that binary number are set to 1 and hence buckets 2 and 3 are “activated”. Hope that makes sense and is useful to some of you! @Jamiet P.S. I used the awesome HTML Copy feature of Visual Studio’s Productivity Power Tools in order to format the T-SQL code above for this blog post.

  Read the article

• Converting from mp4 to Xvid avi using avconv?

  - by Ricardo Gladwell

  I normally use avidemux to convert mp4s to Xvid AVI for my Philips Streamium SLM5500. Normally I select MPEG-4 ASP (Xvid) at Two Pass with an average bitrate f 1500kb/s for video and AC3 (lav) audio and it converts correctly. However, I'm trying to using avconv so I can automate the process with a script, but when I do this the video stutters and stops playing part way through. I have a suspicion its something to do with a faulty audio conversion. The commands I'm using are as follows: avconv -y -i video.mp4 -pass 1 -vtag xvid -c:a ac3 -b:a 128k -b:v 1500k -f avi /dev/null avconv -y -i video.mp4 -pass 2 -vtag xvid -c:a ac3 -b:a 128k -b:v 1500k -f avi video.avi There is a bewildering array of arguments for avconv. Is there something I'm doing wrong? Is there a way I can script avidemux from a headless server? Please see command line output: $ avconv -y -i video.mp4 -pass 1 -vtag xvid -an -b:v 1500k -f avi /dev/null avconv version 0.8.5-6:0.8.5-0ubuntu0.12.10.1, Copyright (c) 2000-2012 the Libav developers built on Jan 24 2013 14:49:20 with gcc 4.7.2 Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'video.mp4': Metadata: major_brand : isom minor_version : 1 compatible_brands: isomavc1 creation_time : 2013-02-04 13:53:38 Duration: 00:44:09.16, start: 0.000000, bitrate: 669 kb/s Stream #0.0(und): Video: h264 (High), yuv420p, 720x404 [PAR 1:1 DAR 180:101], 538 kb/s, 25 fps, 25 tbr, 100 tbn, 50 tbc Metadata: creation_time : 2013-02-04 13:53:38 Stream #0.1(und): Audio: ac3, 44100 Hz, stereo, s16, 127 kb/s Metadata: creation_time : 2013-02-04 13:53:42 [buffer @ 0x7f4c40] w:720 h:404 pixfmt:yuv420p Output #0, avi, to '/dev/null': Metadata: major_brand : isom minor_version : 1 compatible_brands: isomavc1 creation_time : 2013-02-04 13:53:38 ISFT : Lavf53.21.1 Stream #0.0(und): Video: mpeg4, yuv420p, 720x404 [PAR 1:1 DAR 180:101], q=2-31, pass 1, 1500 kb/s, 25 tbn, 25 tbc Metadata: creation_time : 2013-02-04 13:53:38 Stream mapping: Stream #0:0 -> #0:0 (h264 -> mpeg4) Press ctrl-c to stop encoding frame=66227 fps=328 q=2.0 Lsize= 0kB time=2649.16 bitrate= 0.0kbits/s video:401602kB audio:0kB global headers:0kB muxing overhead -100.000000% $ avconv -y -i video.mp4 -pass 2 -vtag xvid -c:a ac3 -b:a 128k -b:v 1500k -f avi video.avi avconv version 0.8.5-6:0.8.5-0ubuntu0.12.10.1, Copyright (c) 2000-2012 the Libav developers built on Jan 24 2013 14:49:20 with gcc 4.7.2 Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'video.mp4': Metadata: major_brand : isom minor_version : 1 compatible_brands: isomavc1 creation_time : 2013-02-04 13:53:38 Duration: 00:44:09.16, start: 0.000000, bitrate: 669 kb/s Stream #0.0(und): Video: h264 (High), yuv420p, 720x404 [PAR 1:1 DAR 180:101], 538 kb/s, 25 fps, 25 tbr, 100 tbn, 50 tbc Metadata: creation_time : 2013-02-04 13:53:38 Stream #0.1(und): Audio: ac3, 44100 Hz, stereo, s16, 127 kb/s Metadata: creation_time : 2013-02-04 13:53:42 [buffer @ 0x12b4f00] w:720 h:404 pixfmt:yuv420p Incompatible sample format 's16' for codec 'ac3', auto-selecting format 'flt' [mpeg4 @ 0x12b3ec0] [lavc rc] Using all of requested bitrate is not necessary for this video with these parameters. Output #0, avi, to 'video.avi': Metadata: major_brand : isom minor_version : 1 compatible_brands: isomavc1 creation_time : 2013-02-04 13:53:38 ISFT : Lavf53.21.1 Stream #0.0(und): Video: mpeg4, yuv420p, 720x404 [PAR 1:1 DAR 180:101], q=2-31, pass 2, 1500 kb/s, 25 tbn, 25 tbc Metadata: creation_time : 2013-02-04 13:53:38 Stream #0.1(und): Audio: ac3, 44100 Hz, stereo, flt, 128 kb/s Metadata: creation_time : 2013-02-04 13:53:42 Stream mapping: Stream #0:0 -> #0:0 (h264 -> mpeg4) Stream #0:1 -> #0:1 (ac3 -> ac3) Press ctrl-c to stop encoding Input stream #0:1 frame changed from rate:44100 fmt:s16 ch:2 to rate:44100 fmt:flt ch:2 frame=66227 fps=284 q=2.2 Lsize= 458486kB time=2649.13 bitrate=1417.8kbits/s video:413716kB audio:41393kB global headers:0kB muxing overhead 0.741969%

  Read the article

• XNA 4.0 - Normal mapping shader - strange texture artifacts

  - by Taylor

  I recently started using custom shader. Shader can do diffuse and specular lighting and normal mapping. But normal mapping is causing really ugly artifacts (some sort of pixeling noise) for textures in greater distance. It looks like this: Image link This is HLSL code: // Matrix float4x4 World : World; float4x4 View : View; float4x4 Projection : Projection; //Textury texture2D ColorMap; sampler2D ColorMapSampler = sampler_state { Texture = <ColorMap>; MinFilter = Anisotropic; MagFilter = Linear; MipFilter = Linear; MaxAnisotropy = 16; }; texture2D NormalMap; sampler2D NormalMapSampler = sampler_state { Texture = <NormalMap>; MinFilter = Anisotropic; MagFilter = Linear; MipFilter = Linear; MaxAnisotropy = 16; }; // Light float4 AmbientColor : Color; float AmbientIntensity; float3 DiffuseDirection : LightPosition; float4 DiffuseColor : Color; float DiffuseIntensity; float4 SpecularColor : Color; float3 CameraPosition : CameraPosition; float Shininess; // The input for the VertexShader struct VertexShaderInput { float4 Position : POSITION0; float2 TexCoord : TEXCOORD0; float3 Normal : NORMAL0; float3 Binormal : BINORMAL0; float3 Tangent : TANGENT0; }; // The output from the vertex shader, used for later processing struct VertexShaderOutput { float4 Position : POSITION0; float2 TexCoord : TEXCOORD0; float3 View : TEXCOORD1; float3x3 WorldToTangentSpace : TEXCOORD2; }; // The VertexShader. VertexShaderOutput VertexShaderFunction(VertexShaderInput input, float3 Normal : NORMAL) { VertexShaderOutput output; float4 worldPosition = mul(input.Position, World); float4 viewPosition = mul(worldPosition, View); output.Position = mul(viewPosition, Projection); output.TexCoord = input.TexCoord; output.WorldToTangentSpace[0] = mul(normalize(input.Tangent), World); output.WorldToTangentSpace[1] = mul(normalize(input.Binormal), World); output.WorldToTangentSpace[2] = mul(normalize(input.Normal), World); output.View = normalize(float4(CameraPosition,1.0) - worldPosition); return output; } // The Pixel Shader float4 PixelShaderFunction(VertexShaderOutput input) : COLOR0 { float4 color = tex2D(ColorMapSampler, input.TexCoord); float3 normalMap = 2.0 *(tex2D(NormalMapSampler, input.TexCoord)) - 1.0; normalMap = normalize(mul(normalMap, input.WorldToTangentSpace)); float4 normal = float4(normalMap,1.0); float4 diffuse = saturate(dot(-DiffuseDirection,normal)); float4 reflect = normalize(2*diffuse*normal-float4(DiffuseDirection,1.0)); float4 specular = pow(saturate(dot(reflect,input.View)), Shininess); return color * AmbientColor * AmbientIntensity + color * DiffuseIntensity * DiffuseColor * diffuse + color * SpecularColor * specular; } // Techniques technique Lighting { pass Pass1 { VertexShader = compile vs_2_0 VertexShaderFunction(); PixelShader = compile ps_2_0 PixelShaderFunction(); } } Any advice? Thanks!

  Read the article

• Serial plans: Threshold / Parallel_degree_limit = 1

  - by jean-pierre.dijcks

  As a very short follow up on the previous post. So here is some more on getting a serial plan and why that happens Another reason - compared to the auto DOP is not on as we looked at in the earlier post - and often more prevalent to get a serial plan is if the plan simply does not take long enough to consider a parallel path. The resulting plan and note looks like this (note that this is a serial plan!): explain plan for select count(1) from sales; SELECT PLAN_TABLE_OUTPUT FROM TABLE(DBMS_XPLAN.DISPLAY()); PLAN_TABLE_OUTPUT -------------------------------------------------------------------------------- Plan hash value: 672559287 -------------------------------------------------------------------------------------- | Id  | Operation            | Name  | Rows  | Cost (%CPU)| Time     | Pstart| Pstop | -------------------------------------------------------------------------------------- PLAN_TABLE_OUTPUT -------------------------------------------------------------------------------- |   0 | SELECT STATEMENT     |       |     1 |     5   (0)| 00:00:01 |       |     | |   1 |  SORT AGGREGATE      |       |     1 |            |          |       |     | |   2 |   PARTITION RANGE ALL|       |   960 |     5   (0)| 00:00:01 |     1 |  16 | |   3 |    TABLE ACCESS FULL | SALES |   960 |     5   (0)| 00:00:01 |     1 |  16 | Note -----    - automatic DOP: Computed Degree of Parallelism is 1 because of parallel threshold 14 rows selected. The parallel threshold is referring to parallel_min_time_threshold and since I did not change the default (10s) the plan is not being considered for a parallel degree computation and is therefore staying with the serial execution. Now we go into the land of crazy: Assume I do want this DOP=1 to happen, I could set the parameter in the init.ora, but to highlight it in this case I changed it on the session: alter session set parallel_degree_limit = 1; The result I get is: ERROR: ORA-02097: parameter cannot be modified because specified value is invalid ORA-00096: invalid value 1 for parameter parallel_degree_limit, must be from among CPU IO AUTO INTEGER>=2 Which of course makes perfect sense...

  Read the article

• SPARC T5-4 LDoms for RAC and WebLogic Clusters

  - by Jeff Taylor-Oracle

  I wanted to use two Oracle SPARC T5-4 servers to simultaneously host both Oracle RAC and a WebLogic Server Cluster. I chose to use Oracle VM Server for SPARC to create a cluster like this: There are plenty of trade offs and decisions that need to be made, for example: Rather than configuring the system by hand, you might want to use an Oracle SuperCluster T5-8 My configuration is similar to jsavit's: Availability Best Practices - Example configuring a T5-8 but I chose to ignore some of the advice. Maybe I should have included an  alternate service domain, but I decided that I already had enough redundancy Both Oracle SPARC T5-4 servers were to be configured like this: Cntl 0.25  4  64GB                     App LDom                    2.75 CPU's                                        44 cores                                          704 GB              DB LDom      One CPU         16 cores         256 GB   The systems started with everything in the primary domain: # ldm list NAME             STATE      FLAGS   CONS    VCPU  MEMORY   UTIL  NORM  UPTIME primary          active     -n-c--  UART    512   1023G    0.0%  0.0%  11m # ldm list-spconfig factory-default [current] primary # ldm list -o core,memory,physio NAME              primary           CORE     CID    CPUSET     0      (0, 1, 2, 3, 4, 5, 6, 7)     1      (8, 9, 10, 11, 12, 13, 14, 15)     2      (16, 17, 18, 19, 20, 21, 22, 23) -- SNIP     62     (496, 497, 498, 499, 500, 501, 502, 503)     63     (504, 505, 506, 507, 508, 509, 510, 511) MEMORY     RA               PA               SIZE                 0x30000000       0x30000000       255G     0x80000000000    0x80000000000    256G     0x100000000000   0x100000000000   256G     0x180000000000   0x180000000000   256G # Give this memory block to the DB LDom IO     DEVICE                           PSEUDONYM        OPTIONS     pci@300                          pci_0                pci@340                          pci_1                pci@380                          pci_2                pci@3c0                          pci_3                pci@400                          pci_4                pci@440                          pci_5                pci@480                          pci_6                pci@4c0                          pci_7                pci@300/pci@1/pci@0/pci@6        /SYS/RCSA/PCIE1     pci@300/pci@1/pci@0/pci@c        /SYS/RCSA/PCIE2     pci@300/pci@1/pci@0/pci@4/pci@0/pci@c /SYS/MB/SASHBA0     pci@300/pci@1/pci@0/pci@4/pci@0/pci@8 /SYS/RIO/NET0        pci@340/pci@1/pci@0/pci@6        /SYS/RCSA/PCIE3     pci@340/pci@1/pci@0/pci@c        /SYS/RCSA/PCIE4     pci@380/pci@1/pci@0/pci@a        /SYS/RCSA/PCIE9     pci@380/pci@1/pci@0/pci@4        /SYS/RCSA/PCIE10     pci@3c0/pci@1/pci@0/pci@e        /SYS/RCSA/PCIE11     pci@3c0/pci@1/pci@0/pci@8        /SYS/RCSA/PCIE12     pci@400/pci@1/pci@0/pci@e        /SYS/RCSA/PCIE5     pci@400/pci@1/pci@0/pci@8        /SYS/RCSA/PCIE6     pci@440/pci@1/pci@0/pci@e        /SYS/RCSA/PCIE7     pci@440/pci@1/pci@0/pci@8        /SYS/RCSA/PCIE8     pci@480/pci@1/pci@0/pci@a        /SYS/RCSA/PCIE13     pci@480/pci@1/pci@0/pci@4        /SYS/RCSA/PCIE14     pci@4c0/pci@1/pci@0/pci@8        /SYS/RCSA/PCIE15     pci@4c0/pci@1/pci@0/pci@4        /SYS/RCSA/PCIE16     pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c /SYS/MB/SASHBA1     pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4 /SYS/RIO/NET2    Added an additional service processor configuration: # ldm add-spconfig split # ldm list-spconfig factory-default primary split [current] And removed many of the resources from the primary domain: # ldm start-reconf primary # ldm set-core 4 primary # ldm set-memory 32G primary # ldm rm-io pci@340 primary # ldm rm-io pci@380 primary # ldm rm-io pci@3c0 primary # ldm rm-io pci@400 primary # ldm rm-io pci@440 primary # ldm rm-io pci@480 primary # ldm rm-io pci@4c0 primary # init 6 Needed to add resources to the guest domains: # ldm add-domain db # ldm set-core cid=`seq -s"," 48 63` db # ldm add-memory mblock=0x180000000000:256G db # ldm add-io pci@480 db # ldm add-io pci@4c0 db # ldm add-domain app # ldm set-core 44 app # ldm set-memory 704G  app # ldm add-io pci@340 app # ldm add-io pci@380 app # ldm add-io pci@3c0 app # ldm add-io pci@400 app # ldm add-io pci@440 app Needed to set up services: # ldm add-vds primary-vds0 primary # ldm add-vcc port-range=5000-5100 primary-vcc0 primary Needed to add a virtual network port for the WebLogic application domain: # ipadm NAME              CLASS/TYPE STATE        UNDER      ADDR lo0               loopback   ok           --         --    lo0/v4         static     ok           --         ...    lo0/v6         static     ok           --         ... net0              ip         ok           --         ...    net0/v4        static     ok           --         xxx.xxx.xxx.xxx/24    net0/v6        addrconf   ok           --         ....    net0/v6        addrconf   ok           --         ... net8              ip         ok           --         --    net8/v4        static     ok           --         ... # dladm show-phys LINK              MEDIA                STATE      SPEED  DUPLEX    DEVICE net1              Ethernet             unknown    0      unknown   ixgbe1 net0              Ethernet             up         1000   full      ixgbe0 net8              Ethernet             up         10     full      usbecm2 # ldm add-vsw net-dev=net0 primary-vsw0 primary # ldm add-vnet vnet1 primary-vsw0 app Needed to add a virtual disk to the WebLogic application domain: # format Searching for disks...done AVAILABLE DISK SELECTIONS:        0. c0t5000CCA02505F874d0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB>           /scsi_vhci/disk@g5000cca02505f874           /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD0/disk        1. c0t5000CCA02506C468d0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB>           /scsi_vhci/disk@g5000cca02506c468           /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD1/disk        2. c0t5000CCA025067E5Cd0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB>           /scsi_vhci/disk@g5000cca025067e5c           /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD2/disk        3. c0t5000CCA02506C258d0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB>           /scsi_vhci/disk@g5000cca02506c258           /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD3/disk Specify disk (enter its number): ^C # ldm add-vdsdev /dev/dsk/c0t5000CCA02506C468d0s2 HDD1@primary-vds0 # ldm add-vdisk HDD1 HDD1@primary-vds0 app Add some additional spice to the pot: # ldm set-variable auto-boot\\?=false db # ldm set-variable auto-boot\\?=false app # ldm set-var boot-device=HDD1 app Bind the logical domains: # ldm bind db # ldm bind app At the end of the process, the system is set up like this: # ldm list -o core,memory,physio NAME             primary          CORE     CID    CPUSET     0      (0, 1, 2, 3, 4, 5, 6, 7)     1      (8, 9, 10, 11, 12, 13, 14, 15)     2      (16, 17, 18, 19, 20, 21, 22, 23)     3      (24, 25, 26, 27, 28, 29, 30, 31) MEMORY     RA               PA               SIZE                0x30000000       0x30000000       32G IO     DEVICE                           PSEUDONYM        OPTIONS     pci@300                          pci_0               pci@300/pci@1/pci@0/pci@6        /SYS/RCSA/PCIE1     pci@300/pci@1/pci@0/pci@c        /SYS/RCSA/PCIE2     pci@300/pci@1/pci@0/pci@4/pci@0/pci@c /SYS/MB/SASHBA0     pci@300/pci@1/pci@0/pci@4/pci@0/pci@8 /SYS/RIO/NET0   ------------------------------------------------------------------------------ NAME             app              CORE     CID    CPUSET     4      (32, 33, 34, 35, 36, 37, 38, 39)     5      (40, 41, 42, 43, 44, 45, 46, 47)     6      (48, 49, 50, 51, 52, 53, 54, 55)     7      (56, 57, 58, 59, 60, 61, 62, 63)     8      (64, 65, 66, 67, 68, 69, 70, 71)     9      (72, 73, 74, 75, 76, 77, 78, 79)     10     (80, 81, 82, 83, 84, 85, 86, 87)     11     (88, 89, 90, 91, 92, 93, 94, 95)     12     (96, 97, 98, 99, 100, 101, 102, 103)     13     (104, 105, 106, 107, 108, 109, 110, 111)     14     (112, 113, 114, 115, 116, 117, 118, 119)     15     (120, 121, 122, 123, 124, 125, 126, 127)     16     (128, 129, 130, 131, 132, 133, 134, 135)     17     (136, 137, 138, 139, 140, 141, 142, 143)     18     (144, 145, 146, 147, 148, 149, 150, 151)     19     (152, 153, 154, 155, 156, 157, 158, 159)     20     (160, 161, 162, 163, 164, 165, 166, 167)     21     (168, 169, 170, 171, 172, 173, 174, 175)     22     (176, 177, 178, 179, 180, 181, 182, 183)     23     (184, 185, 186, 187, 188, 189, 190, 191)     24     (192, 193, 194, 195, 196, 197, 198, 199)     25     (200, 201, 202, 203, 204, 205, 206, 207)     26     (208, 209, 210, 211, 212, 213, 214, 215)     27     (216, 217, 218, 219, 220, 221, 222, 223)     28     (224, 225, 226, 227, 228, 229, 230, 231)     29     (232, 233, 234, 235, 236, 237, 238, 239)     30     (240, 241, 242, 243, 244, 245, 246, 247)     31     (248, 249, 250, 251, 252, 253, 254, 255)     32     (256, 257, 258, 259, 260, 261, 262, 263)     33     (264, 265, 266, 267, 268, 269, 270, 271)     34     (272, 273, 274, 275, 276, 277, 278, 279)     35     (280, 281, 282, 283, 284, 285, 286, 287)     36     (288, 289, 290, 291, 292, 293, 294, 295)     37     (296, 297, 298, 299, 300, 301, 302, 303)     38     (304, 305, 306, 307, 308, 309, 310, 311)     39     (312, 313, 314, 315, 316, 317, 318, 319)     40     (320, 321, 322, 323, 324, 325, 326, 327)     41     (328, 329, 330, 331, 332, 333, 334, 335)     42     (336, 337, 338, 339, 340, 341, 342, 343)     43     (344, 345, 346, 347, 348, 349, 350, 351)     44     (352, 353, 354, 355, 356, 357, 358, 359)     45     (360, 361, 362, 363, 364, 365, 366, 367)     46     (368, 369, 370, 371, 372, 373, 374, 375)     47     (376, 377, 378, 379, 380, 381, 382, 383) MEMORY     RA               PA               SIZE                0x30000000       0x830000000      192G     0x4000000000     0x80000000000    256G     0x8080000000     0x100000000000   256G IO     DEVICE                           PSEUDONYM        OPTIONS     pci@340                          pci_1               pci@380                          pci_2               pci@3c0                          pci_3               pci@400                          pci_4               pci@440                          pci_5               pci@340/pci@1/pci@0/pci@6        /SYS/RCSA/PCIE3     pci@340/pci@1/pci@0/pci@c        /SYS/RCSA/PCIE4     pci@380/pci@1/pci@0/pci@a        /SYS/RCSA/PCIE9     pci@380/pci@1/pci@0/pci@4        /SYS/RCSA/PCIE10     pci@3c0/pci@1/pci@0/pci@e        /SYS/RCSA/PCIE11     pci@3c0/pci@1/pci@0/pci@8        /SYS/RCSA/PCIE12     pci@400/pci@1/pci@0/pci@e        /SYS/RCSA/PCIE5     pci@400/pci@1/pci@0/pci@8        /SYS/RCSA/PCIE6     pci@440/pci@1/pci@0/pci@e        /SYS/RCSA/PCIE7     pci@440/pci@1/pci@0/pci@8        /SYS/RCSA/PCIE8 ------------------------------------------------------------------------------ NAME             db               CORE     CID    CPUSET     48     (384, 385, 386, 387, 388, 389, 390, 391)     49     (392, 393, 394, 395, 396, 397, 398, 399)     50     (400, 401, 402, 403, 404, 405, 406, 407)     51     (408, 409, 410, 411, 412, 413, 414, 415)     52     (416, 417, 418, 419, 420, 421, 422, 423)     53     (424, 425, 426, 427, 428, 429, 430, 431)     54     (432, 433, 434, 435, 436, 437, 438, 439)     55     (440, 441, 442, 443, 444, 445, 446, 447)     56     (448, 449, 450, 451, 452, 453, 454, 455)     57     (456, 457, 458, 459, 460, 461, 462, 463)     58     (464, 465, 466, 467, 468, 469, 470, 471)     59     (472, 473, 474, 475, 476, 477, 478, 479)     60     (480, 481, 482, 483, 484, 485, 486, 487)     61     (488, 489, 490, 491, 492, 493, 494, 495)     62     (496, 497, 498, 499, 500, 501, 502, 503)     63     (504, 505, 506, 507, 508, 509, 510, 511) MEMORY     RA               PA               SIZE                0x80000000       0x180000000000   256G IO     DEVICE                           PSEUDONYM        OPTIONS     pci@480                          pci_6               pci@4c0                          pci_7               pci@480/pci@1/pci@0/pci@a        /SYS/RCSA/PCIE13     pci@480/pci@1/pci@0/pci@4        /SYS/RCSA/PCIE14     pci@4c0/pci@1/pci@0/pci@8        /SYS/RCSA/PCIE15     pci@4c0/pci@1/pci@0/pci@4        /SYS/RCSA/PCIE16     pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c /SYS/MB/SASHBA1     pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4 /SYS/RIO/NET2   Start the domains: # ldm start app LDom app started # ldm start db LDom db started Make sure to start the vntsd service that was created, above. # svcs -a | grep ldo disabled        8:38:38 svc:/ldoms/vntsd:default online          8:38:58 svc:/ldoms/agents:default online          8:39:25 svc:/ldoms/ldmd:default # svcadm enable vntsd Now use the MAC address to configure the Solaris 11 Automated Installation. Database Logical Domain # telnet localhost 5000 {0} ok devalias screen                   /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@7/display@0 disk7                    /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p3 disk6                    /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p2 disk5                    /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p1 disk4                    /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p0 scsi1                    /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0 net3                     /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4/network@0,1 net2                     /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4/network@0 virtual-console          /virtual-devices/console@1 name                     aliases {0} ok boot net2 Boot device: /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4/network@0  File and args: 1000 Mbps full duplex Link up Requesting Internet Address for xx:xx:xx:xx:xx:xx Requesting Internet Address for xx:xx:xx:xx:xx:xx WLS Logical Domain # telnet localhost 5001 {0} ok devalias hdd1                     /virtual-devices@100/channel-devices@200/disk@0 vnet1                    /virtual-devices@100/channel-devices@200/network@0 net                      /virtual-devices@100/channel-devices@200/network@0 disk                     /virtual-devices@100/channel-devices@200/disk@0 virtual-console          /virtual-devices/console@1 name                     aliases {0} ok boot net Boot device: /virtual-devices@100/channel-devices@200/network@0  File and args: Requesting Internet Address for xx:xx:xx:xx:xx:xx Requesting Internet Address for xx:xx:xx:xx:xx:xx Repeat the process for the second SPARC T5-4, install Solaris, RAC and WebLogic Cluster, and you are ready to go. Maybe buying a SuperCluster would have been easier.

  Read the article

• Realtek RTL8111/8168B wired network doesn't work anymore

  - by Radar4002

  This sounds like it's a common problem upgrading 11.04, but I am having trouble finding a common solution, and one that will work for me. I just applied updates via the update manager and now my wired network connection is down. I know Ubuntu network settings is the issue, because I have a dual-boot with Win 7 and my network/internet is fine on Win 7. I don't know too much about networking, so what can I do to trouble shoot this issue? I can choose an older grub version, 2.6.38-8 instead of 2.6.38-11 and this does not resolve the issue. Here is my lspci result: 00:00.0 Host bridge: ATI Technologies Inc RD890 Northbridge only single slot PCI-e GFX Hydra part (rev 02) 00:02.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port B) 00:04.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port D) 00:05.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port E) 00:06.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port F) 00:07.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port G) 00:09.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port H) 00:0a.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (external gfx1 port A) 00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] (rev 40) 00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 41) 00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller (rev 40) 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) 00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40) 00:14.5 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:15.0 PCI bridge: ATI Technologies Inc Device 43a0 00:16.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:16.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control 01:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5700 Series] 01:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 02:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 07:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 07:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 08:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) 09:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 09:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) Here is my sudo lshw -class network: *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 03 serial: 6c:f0:49:e7:72:e8 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:40 ioport:9e00(size=256) memory:fceff000-fcefffff memory:fcef8000-fcefbfff memory:fce00000-fce1ffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:06:00.0 logical name: eth1 version: 03 serial: 6c:f0:49:e7:72:ea size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:47 ioport:8e00(size=256) memory:fddff000-fddfffff memory:fddf8000-fddfbfff memory:fdd00000-fdd1ffff

  Read the article

• export web page data to excel using javascript [on hold]

  - by Sreevani sri

  I have created web page using html.When i clicked on submit button it will export to excel. using javascript i wnt to export thadt data to excel. my html code is 1. Please give your Name:<input type="text" name="Name" /><br /> 2. Area where you reside:<input type="text" name="Res" /><br /> 3. Specify your age group<br /> (a)15-25<input type="text" name="age" /> (b)26-35<input type="text" name="age" /> (c)36-45<input type="text" name="age" /> (d) Above 46<input type="text" name="age" /><br /> 4. Specify your occupation<br /> (a) Student<input type="checkbox" name="occ" value="student" /> (b) Home maker<input type="checkbox" name="occ" value="home" /> (c) Employee<input type="checkbox" name="occ" value="emp" /> (d) Businesswoman <input type="checkbox" name="occ" value="buss" /> (e) Retired<input type="checkbox" name="occ" value="retired" /> (f) others (please specify)<input type="text" name="others" /><br /> 5. Specify the nature of your family<br /> (a) Joint family<input type="checkbox" name="family" value="jfamily" /> (b) Nuclear family<input type="checkbox" name="family" value="nfamily" /><br /> 6. Please give the Number of female members in your family and their average age approximately<br /> Members Age 1 2 3 4 5<br /> 8. Please give your highest level of education (a)SSC or below<input type="checkbox" name="edu" value="ssc" /> (b) Intermediate<input type="checkbox" name="edu" value="int" /> (c) Diploma <input type="checkbox" name="edu" value="dip" /> (d)UG degree <input type="checkbox" name="edu" value="deg" /> (e) PG <input type="checkbox" name="edu" value="pg" /> (g) Doctorial degree<input type="checkbox" name="edu" value="doc" /><br /> 9. Specify your monthly income approximately in RS <input type="text" name="income" /><br /> 10. Specify your time spent in making a purchase decision at the outlet<br /> (a)0-15 min <input type="checkbox" name="dis" value="0-15 min" /> (b)16-30 min <input type="checkbox" name="dis" value="16-30 min" /> (c) 30-45 min<input type="checkbox" name="dis" value="30-45 min" /> (d) 46-60 min<input type="checkbox" name="dis" value="46-60 min" /><br /> <input type="submit" onclick="exportToExcel()" value="Submit" /> </div> </form>

  Read the article

• T-SQL Tuesday #025 &ndash; CHECK Constraint Tricks

  - by Most Valuable Yak (Rob Volk)

  Allen White (blog | twitter), marathoner, SQL Server MVP and presenter, and all-around awesome author is hosting this month's T-SQL Tuesday on sharing SQL Server Tips and Tricks.  And for those of you who have attended my Revenge: The SQL presentation, you know that I have 1 or 2 of them.  You'll also know that I don't recommend using anything I talk about in a production system, and will continue that advice here…although you might be sorely tempted.  Suffice it to say I'm not using these examples myself, but I think they're worth sharing anyway. Some of you have seen or read about SQL Server constraints and have applied them to your table designs…unless you're a vendor ;)…and may even use CHECK constraints to limit numeric values, or length of strings, allowable characters and such.  CHECK constraints can, however, do more than that, and can even provide enhanced security and other restrictions. One tip or trick that I didn't cover very well in the presentation is using constraints to do unusual things; specifically, limiting or preventing inserts into tables.  The idea was to use a CHECK constraint in a way that didn't depend on the actual data: -- create a table that cannot accept data CREATE TABLE dbo.JustTryIt(a BIT NOT NULL PRIMARY KEY, CONSTRAINT chk_no_insert CHECK (GETDATE()=GETDATE()+1)) INSERT dbo.JustTryIt VALUES(1)   I'll let you run that yourself, but I'm sure you'll see that this is a pretty stupid table to have, since the CHECK condition will always be false, and therefore will prevent any data from ever being inserted.  I can't remember why I used this example but it was for some vague and esoteric purpose that applies to about, maybe, zero people.  I come up with a lot of examples like that. However, if you realize that these CHECKs are not limited to column references, and if you explore the SQL Server function list, you could come up with a few that might be useful.  I'll let the names describe what they do instead of explaining them all: CREATE TABLE NoSA(a int not null, CONSTRAINT CHK_No_sa CHECK (SUSER_SNAME()<>'sa')) CREATE TABLE NoSysAdmin(a int not null, CONSTRAINT CHK_No_sysadmin CHECK (IS_SRVROLEMEMBER('sysadmin')=0)) CREATE TABLE NoAdHoc(a int not null, CONSTRAINT CHK_No_AdHoc CHECK (OBJECT_NAME(@@PROCID) IS NOT NULL)) CREATE TABLE NoAdHoc2(a int not null, CONSTRAINT CHK_No_AdHoc2 CHECK (@@NESTLEVEL>0)) CREATE TABLE NoCursors(a int not null, CONSTRAINT CHK_No_Cursors CHECK (@@CURSOR_ROWS=0)) CREATE TABLE ANSI_PADDING_ON(a int not null, CONSTRAINT CHK_ANSI_PADDING_ON CHECK (@@OPTIONS & 16=16)) CREATE TABLE TimeOfDay(a int not null, CONSTRAINT CHK_TimeOfDay CHECK (DATEPART(hour,GETDATE()) BETWEEN 0 AND 1)) GO -- log in as sa or a sysadmin server role member, and try this: INSERT NoSA VALUES(1) INSERT NoSysAdmin VALUES(1) -- note the difference when using sa vs. non-sa -- then try it again with a non-sysadmin login -- see if this works: INSERT NoAdHoc VALUES(1) INSERT NoAdHoc2 VALUES(1) GO -- then try this: CREATE PROCEDURE NotAdHoc @val1 int, @val2 int AS SET NOCOUNT ON; INSERT NoAdHoc VALUES(@val1) INSERT NoAdHoc2 VALUES(@val2) GO EXEC NotAdHoc 2,2 -- which values got inserted? SELECT * FROM NoAdHoc SELECT * FROM NoAdHoc2   -- and this one just makes me happy :) INSERT NoCursors VALUES(1) DECLARE curs CURSOR FOR SELECT 1 OPEN curs INSERT NoCursors VALUES(2) CLOSE curs DEALLOCATE curs INSERT NoCursors VALUES(3) SELECT * FROM NoCursors   I'll leave the ANSI_PADDING_ON and TimeOfDay tables for you to test on your own, I think you get the idea.  (Also take a look at the NoCursors example, notice anything interesting?)  The real eye-opener, for me anyway, is the ability to limit bad coding practices like cursors, ad-hoc SQL, and sa use/abuse by using declarative SQL objects.  I'm sure you can see how and why this would come up when discussing Revenge: The SQL.;) And the best part IMHO is that these work on pretty much any version of SQL Server, without needing Policy Based Management, DDL/login triggers, or similar tools to enforce best practices. All seriousness aside, I highly recommend that you spend some time letting your mind go wild with the possibilities and see how far you can take things.  There are no rules! (Hmmmm, what can I do with rules?) #TSQL2sDay

  Read the article

• EF4 Code First Control Unicode and Decimal Precision, Scale with Attributes

  - by Dane Morgridge

  There are several attributes available when using code first with the Entity Framework 4 CTP5 Code First option.  When working with strings you can use [MaxLength(length)] to control the length and [Required] will work on all properties.  But there are a few things missing. By default all string will be created using unicode so you will get nvarchar instead of varchar.  You can change this using the fluent API or you can create an attribute to make the change.  If you have a lot of properties, the attribute will be much easier and require less code. You will need to add two classes to your project to create the attribute itself: 1: public class UnicodeAttribute : Attribute 2: { 3: bool _isUnicode; 4:  5: public UnicodeAttribute(bool isUnicode) 6: { 7: _isUnicode = isUnicode; 8: } 9:  10: public bool IsUnicode { get { return _isUnicode; } } 11: } 12:  13: public class UnicodeAttributeConvention : AttributeConfigurationConvention<PropertyInfo, StringPropertyConfiguration, UnicodeAttribute> 14: { 15: public override void Apply(PropertyInfo memberInfo, StringPropertyConfiguration configuration, UnicodeAttribute attribute) 16: { 17: configuration.IsUnicode = attribute.IsUnicode; 18: } 19: } The UnicodeAttribue class gives you a [Unicode] attribute that you can use on your properties and the UnicodeAttributeConvention will tell EF how to handle the attribute. You will need to add a line to the OnModelCreating method inside your context for EF to recognize the attribute: 1: protected override void OnModelCreating(System.Data.Entity.ModelConfiguration.ModelBuilder modelBuilder) 2: { 3: modelBuilder.Conventions.Add(new UnicodeAttributeConvention()); 4: base.OnModelCreating(modelBuilder); 5: } Once you have this done, you can use the attribute in your classes to make sure that you get database types of varchar instead of nvarchar: 1: [Unicode(false)] 2: public string Name { get; set; }   Another option that is missing is the ability to set the precision and scale on a decimal.  By default decimals get created as (18,0).  If you need decimals to be something like (9,2) then you can once again use the fluent API or create a custom attribute.  As with the unicode attribute, you will need to add two classes to your project: 1: public class DecimalPrecisionAttribute : Attribute 2: { 3: int _precision; 4: private int _scale; 5:  6: public DecimalPrecisionAttribute(int precision, int scale) 7: { 8: _precision = precision; 9: _scale = scale; 10: } 11:  12: public int Precision { get { return _precision; } } 13: public int Scale { get { return _scale; } } 14: } 15:  16: public class DecimalPrecisionAttributeConvention : AttributeConfigurationConvention<PropertyInfo, DecimalPropertyConfiguration, DecimalPrecisionAttribute> 17: { 18: public override void Apply(PropertyInfo memberInfo, DecimalPropertyConfiguration configuration, DecimalPrecisionAttribute attribute) 19: { 20: configuration.Precision = Convert.ToByte(attribute.Precision); 21: configuration.Scale = Convert.ToByte(attribute.Scale); 22:  23: } 24: } Add your line to the OnModelCreating: 1: protected override void OnModelCreating(System.Data.Entity.ModelConfiguration.ModelBuilder modelBuilder) 2: { 3: modelBuilder.Conventions.Add(new UnicodeAttributeConvention()); 4: modelBuilder.Conventions.Add(new DecimalPrecisionAttributeConvention()); 5: base.OnModelCreating(modelBuilder); 6: } Now you can use the following on your properties: 1: [DecimalPrecision(9,2)] 2: public decimal Cost { get; set; } Both these options use the same concepts so if there are other attributes that you want to use, you can create them quite simply.  The key to it all is the PropertyConfiguration classes.   If there is a class for the datatype, then you should be able to write an attribute to set almost everything you need.  You could also create a single attribute to encapsulate all of the possible string combinations instead of having multiple attributes on each property. All in all, I am loving code first and having attributes to control database generation instead of using the fluent API is huge and saves me a great deal of time.

  Read the article

• MVC Portable Areas &ndash; Static Files as Embedded Resources

  - by Steve Michelotti

  This is the third post in a series related to build and deployment considerations as I’ve been exploring MVC Portable Areas: #1 – Using Web Application Project to build portable areas #2 – Conventions for deploying portable area static files #3 – Portable area static files as embedded resources In the last post, I walked through a convention for managing static files.  In this post I’ll discuss another approach to manage static files (e.g., images, css, js, etc.).  With this approach, you *also* compile the static files as embedded resources into the assembly similar to the *.aspx pages. Once again, you can set this to happen automatically by simply modifying your *.csproj file to include the desired extensions so you don’t have to remember every time you add a file: 1: <Target Name="BeforeBuild"> 2: <ItemGroup> 3: <EmbeddedResource Include="**\*.aspx;**\*.ascx;**\*.gif;**\*.css;**\*.js" /> 4: </ItemGroup> 5: </Target> We now need a reliable way to serve up these static files that are embedded in the assembly. There are a couple of ways to do this but one way is to simply create a Resource controller whose job is dedicated to doing this. 1: public class ResourceController : Controller 2: { 3: public ActionResult Index(string resourceName) 4: { 5: var contentType = GetContentType(resourceName); 6: var resourceStream = Assembly.GetExecutingAssembly().GetManifestResourceStream(resourceName); 7:   8: return this.File(resourceStream, contentType); 9: return View(); 10: } 11:   12: private static string GetContentType(string resourceName) 13: { 14: var extention = resourceName.Substring(resourceName.LastIndexOf('.')).ToLower(); 15: switch (extention) 16: { 17: case ".gif": 18: return "image/gif"; 19: case ".js": 20: return "text/javascript"; 21: case ".css": 22: return "text/css"; 23: default: 24: return "text/html"; 25: } 26: } 27: } In order to use this controller, we need to make sure we’ve registered the route in our portable area registration (shown in lines 5-6): 1: public class WidgetAreaRegistration : PortableAreaRegistration 2: { 3: public override void RegisterArea(System.Web.Mvc.AreaRegistrationContext context, IApplicationBus bus) 4: { 5: context.MapRoute("ResourceRoute", "widget1/resource/{resourceName}", 6: new { controller = "Resource", action = "Index" }); 7:   8: context.MapRoute("Widget1", "widget1/{controller}/{action}", new 9: { 10: controller = "Home", 11: action = "Index" 12: }); 13:   14: RegisterTheViewsInTheEmbeddedViewEngine(GetType()); 15: } 16:   17: public override string AreaName 18: { 19: get { return "Widget1"; } 20: } 21: } In my previous post, we relied on a custom Url helper method to find the actual physical path to the static file like this: 1: <img src="<%: Url.AreaContent("/images/arrow.gif") %>" /> Hello World! However, since we are now embedding the files inside the assembly, we no longer have to worry about the physical path. We can change this line of code to this: 1: <img src="<%: Url.Resource("Widget1.images.arrow.gif") %>" /> Hello World! Note that I had to fully quality the resource name (with namespace and physical location) since that is how .NET assemblies store embedded resources. I also created my own Url helper method called Resource which looks like this: 1: public static string Resource(this UrlHelper urlHelper, string resourceName) 2: { 3: var areaName = (string)urlHelper.RequestContext.RouteData.DataTokens["area"]; 4: return urlHelper.Action("Index", "Resource", new { resourceName = resourceName, area = areaName }); 5: } This method gives us the convenience of not having to know how to construct the URL – but just allowing us to refer to the resource name. The resulting html for the image tag is: 1: <img src="/widget1/resource/Widget1.images.arrow.gif" /> so we can always request any image from the browser directly. This is almost analogous to the WebResource.axd file but for MVC. What is interesting though is that we can encapsulate each one of these so that each area can have it’s own set of resources and they are easily distinguished because the area name is the first segment of the route. This makes me wonder if something like this ResourceController should be baked into portable areas itself. I’m definitely interested in anyone has any opinions on it or have taken alternative approaches.

  Read the article

• Free and Open Source Software in Oracle Solaris 11.1

  - by user13277799

  Oracle Solaris 11.1 contains number of Free and Open Source packages. The following table contains important FOSS packages with their versions available in this latest Oracle Solaris release. a2ps 4.14 aalib 1.4.0 pmtools 20071116 apache-ant 1.7.1 httpd 2.2.22 mod_dtrace 0.3.1 mod_fcgid 2.3.6 tomcat-connectors 1.2.28 mod_perl 2.0.4 mod_proxy_html 3.1.1 modsecurity-apache 2.5.9 mod_wsgi 3.3 apr 1.3.9 apr-util 1.3.9 areca 7.1 autoconf 2.68 autogen 5.9 automake 1.10 automake 1.11.2 automake 1.9.6 bash 4.1 bcc 0.16.17 beanshell 2.0b4 db 5.1.25 bind 9.6-ESV-R7-P2 binutils 2.21.1 bison 2.3 bzip2 1.0.6 cdrtools 3.00 clisp 2.47 cmake 2.8.6 gnu 0.5.11 conflict 20100627 convmv 1.15 coreutils 8.5 cups 1.4.5 curl 7.21.2 cvs 1.12.13 diffutils 2.8.7 doxygen 1.7.6.1 ejabberd 2.1.8 elinks 0.11.7 emacs 23.4 otp_src R12B-5 fcgi 2.4.0 fetchmail 6.3.22 flex 2.5.35 foomatic-db 20080903 foomatic-db-engine 3.0-20080903 foomatic-filters 4.0.15 foomatic-filters-ppds 20080818 fping 2.4b2_to gawk 3.1.8 gcc 3.4.3 gcc 4.5.2 gd 2.0.35 gdb 6.8 gdbm 1.8.3 gettext 0.16.1 grep 2.10 ghostscript 9.00 git 1.7.9.2 gnu-gs-fonts-other 6.0 gnu-gs-fonts-std 6.0 gmp 4.3.2 gnupg 2.0.17 gnuplot 4.6.0 pth 2.0.7 gocr 0.48 gperf 3.0.3 gpgme 1.1.8 grails 1.0.3 graphviz 2.28.0 tar 1.26 guile 1.8.6 gutenprint 5.2.7 gzip 1.4 hal-cups-utils 0.6.19 hexedit 1.2.12 hplip 3.10.9 httping 1.4.4 hwdata 0.5.11 iftop 0.17 ilmbase 1.0.1 ImageMagick 6.3.4 iperf 2.0.4 ipmitool 1.8.11 ircii 20060725 dhcp 4.1-ESV-R7 junit 4.10 INIT 2011-02-08 lcms 1.19 less 436 lftp 4.3.1 libassuan 2.0.1 confuse 2.6 libedit 20110802-3.0 libee 0.3.2 libestr 0.1.2 libevent 1.4.14b expat 2.1.0 libidn 1.19 libksba 1.1.0 libmcrypt 2.5.8 libmemcached 0.16 libmng 1.0.10 neon 0.29.5 libnet 1.1.5 libpcap 1.1.1 librsync 0.9.7 libsigsegv 2.6 libsndfile 1.0.23 libtecla 1.6.1 libtool 2.4.2 libtorrent 0.12.2 libusbugen 0.1.8 libusb 0.1.8 libxml2 2.7.6 libxslt 1.1.26 lighttpd 1.4.23 links 1.03 logilab-astng 0.19.0 logilab-common 0.40.0 lua 5.1.4 m4 1.4.12 make 3.82 mc 4.7.5.2 meld 1.4.0 memcached 1.4.5 memcached-java 2.0.1 mercurial 2.2.1 mpc 0.9 mpfr 2.4.2 mutt 1.5.21 mysql 5.1.37 ncftp 3.2.3 net-snmp 5.4.1 nethack 3.4.3 nmap 5.51 ntp-dev 4.2.5 open-fabrics 1.5.3 openexr 1.6.1 openldap 2.4.30 openscap 0.8.1 openssl 0.9.8q openssl 1.0.0j libopenusb 1.0.1 p7zip 9.20.1 pam_pkcs11 0.6.0 patch 2.5.9 pconsole 1.0 pcre 8.21 perl 5.12.4 DBI 1.58 Net-SSLeay 1.36 pmtools 1.10 XML-Parser 2.36 XML-Simple 2.18 PHP 5.2.17 PHP 5.3.14 pinentry 0.7.6 privoxy 3.0.17 proftpd 1.3.3 psutils p17 pv 1.2.0 pwgen 2.06 pylint 0.18.0 CherryPy 3.1.2 coverage 3.5 jsonrpclib 0.1.3 ldtp 2.1.1 M2Crypto 0.21.1 Mako 0.4.1 nose 1.1.2 ply 3.1 pybonjour 1.1.1 pycups 1.9.46 pycurl 7.19.0 lxml 2.3.3 pyOpenSSL 0.11 Python 2.6.8 Python 2.7.3 setuptools 0.6 quagga 0.99.19 quilt 0.60 rdiff-backup 1.3.3 readline 5.2 rpm2cpio 0.5.11 rsync 3.0.8 rsyslog 6.2.0 rtorrent 0.8.2 ruby 1.8.7 samba 3.6.6 sane-backends 1.0.19 sane-frontends 1.0.14 screen 4.0.3 sed 4.2.1 sendmail 8.14.5 slang 2.2.4 slib 3b1 slrn 0.9.9 snort 2.8.4.1 sox 14.3.2 spawn-fcgi 1.6.3 squid 3.1.18 stdcxx 4.2.1 subversion 1.7.5 sudo 1.8.4.5 swig 1.3.35 expect 5.45 tcl 8.5.9 tk 8.5.9 tls 1.6 tcpdump 4.1.1 tcsh 6.17.00 texinfo 4.7 tidy 1.0.0 timezone apache-tomcat 6.0.35 top 3.8beta1 trousers 0.3.6 unixODBC 2.3.0 unrar 4.1.4 unzip 6.0 vim 7.3 visual-panels wget 1.12 which 2.16 wireshark 1.8.2 wxGTK 2.8.12 xorriso 0.6.0 xz 5.0.1 zip 3.0 zlib 1.2.3 zsh 4.3.17

  Read the article

• Exploring TCP throughput with DTrace

  - by user12820842

  One key measure to use when assessing TCP throughput is assessing the amount of unacknowledged data in the pipe. This is sometimes termed the Bandwidth Delay Product (BDP) (note that BDP is often used more generally as the product of the link capacity and the end-to-end delay). In DTrace terms, the amount of unacknowledged data in bytes for the connection is the different between the next sequence number to send and the lowest unacknoweldged sequence number (tcps_snxt - tcps_suna). According to the theory, when the number of unacknowledged bytes for the connection is less than the receive window of the peer, the path bandwidth is the limiting factor for throughput. In other words, if we can fill the pipe without the peer TCP complaining (by virtue of its window size reaching 0), we are purely bandwidth-limited. If the peer's receive window is too small however, the sending TCP has to wait for acknowledgements before it can send more data. In this case the round-trip time (RTT) limits throughput. In such cases the effective throughput limit is the window size divided by the RTT, e.g. if the window size is 64K and the RTT is 0.5sec, the throughput is 128K/s. So a neat way to visually determine if the receive window of clients may be too small should be to compare the distribution of BDP values for the server versus the client's advertised receive window. If the BDP distribution overlaps the send window distribution such that it is to the right (or lower down in DTrace since quantizations are displayed vertically), it indicates that the amount of unacknowledged data regularly exceeds the client's receive window, so that it is possible that the sender may have more data to send but is blocked by a zero-window on the client side. In the following example, we compare the distribution of BDP values to the receive window advertised by the receiver (10.175.96.92) for a large file download via http. # dtrace -s tcp_tput.d ^C BDP(bytes) 10.175.96.92 80 value ------------- Distribution ------------- count -1 | 0 0 | 6 1 | 0 2 | 0 4 | 0 8 | 0 16 | 0 32 | 0 64 | 0 128 | 0 256 | 3 512 | 0 1024 | 0 2048 | 9 4096 | 14 8192 | 27 16384 | 67 32768 |@@ 1464 65536 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ 32396 131072 | 0 SWND(bytes) 10.175.96.92 80 value ------------- Distribution ------------- count 16384 | 0 32768 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ 17067 65536 | 0 Here we have a puzzle. We can see that the receiver's advertised window is in the 32768-65535 range, while the amount of unacknowledged data in the pipe is largely in the 65536-131071 range. What's going on here? Surely in a case like this we should see zero-window events, since the amount of data in the pipe regularly exceeds the window size of the receiver. We can see that we don't see any zero-window events since the SWND distribution displays no 0 values - it stays within the 32768-65535 range. The explanation is straightforward enough. TCP Window scaling is in operation for this connection - the Window Scale TCP option is used on connection setup to allow a connection to advertise (and have advertised to it) a window greater than 65536 bytes. In this case the scaling shift is 1, so this explains why the SWND values are clustered in the 32768-65535 range rather than the 65536-131071 range - the SWND value needs to be multiplied by two since the reciever is also scaling its window by a shift factor of 1. Here's the simple script that compares BDP and SWND distributions, fixed to take account of window scaling. #!/usr/sbin/dtrace -s #pragma D option quiet tcp:::send / (args[4]-tcp_flags & (TH_SYN|TH_RST|TH_FIN)) == 0 / { @bdp["BDP(bytes)", args[2]-ip_daddr, args[4]-tcp_sport] = quantize(args[3]-tcps_snxt - args[3]-tcps_suna); } tcp:::receive / (args[4]-tcp_flags & (TH_SYN|TH_RST|TH_FIN)) == 0 / { @swnd["SWND(bytes)", args[2]-ip_saddr, args[4]-tcp_dport] = quantize((args[4]-tcp_window)*(1 tcps_snd_ws)); } And here's the fixed output. # dtrace -s tcp_tput_scaled.d ^C BDP(bytes) 10.175.96.92 80 value ------------- Distribution ------------- count -1 | 0 0 | 39 1 | 0 2 | 0 4 | 0 8 | 0 16 | 0 32 | 0 64 | 0 128 | 0 256 | 3 512 | 0 1024 | 0 2048 | 4 4096 | 9 8192 | 22 16384 | 37 32768 |@ 99 65536 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ 3858 131072 | 0 SWND(bytes) 10.175.96.92 80 value ------------- Distribution ------------- count 512 | 0 1024 | 1 2048 | 0 4096 | 2 8192 | 4 16384 | 7 32768 | 14 65536 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ 1956 131072 | 0

  Read the article

• Give a session on C++ AMP – here is how

  - by Daniel Moth

  Ever since presenting on C++ AMP at the AMD Fusion conference in June, then the Gamefest conference in August, and the BUILD conference in September, I've had numerous requests about my material from folks that want to re-deliver the same session. The C++ AMP session I put together has evolved over the 3 presentations to its final form that I used at BUILD, so that is the one I recommend you base yours on. Please get the slides and the recording from channel9 (I'll refer to slide numbers below). This is how I've been presenting the C++ AMP session: Context (slide 3, 04:18-08:18) Start with a demo, on my dual-GPU machine. I've been using the N-Body sample (for VS 11 Developer Preview). (slide 4) Use an nvidia slide that has additional examples of performance improvements that customers enjoy with heterogeneous computing. (slide 5) Talk a bit about the differences today between CPU and GPU hardware, leading to the fact that these will continue to co-exist and that GPUs are great for data parallel algorithms, but not much else today. One is a jack of all trades and the other is a number cruncher. (slide 6) Use the APU example from amd, as one indication that the hardware space is still in motion, emphasizing that the C++ AMP solution is a data parallel API, not a GPU API. It has a future proof design for hardware we have yet to see. (slide 7) Provide more meta-data, as blogged about when I first introduced C++ AMP. Code (slide 9-11) Introduce C++ AMP coding with a simplistic array-addition algorithm – the slides speak for themselves. (slide 12-13) index<N>, extent<N>, and grid<N>. (Slide 14-16) array<T,N>, array_view<T,N> and comparison between them. (Slide 17) parallel_for_each. (slide 18, 21) restrict. (slide 19-20) actual restrictions of restrict(direct3d) – the slides speak for themselves. (slide 22) bring it altogether with a matrix multiplication example. (slide 23-24) accelerator, and accelerator_view. (slide 26-29) Introduce tiling incl. tiled matrix multiplication [tiling probably deserves a whole session instead of 6 minutes!]. IDE (slide 34,37) Briefly touch on the concurrency visualizer. It supports GPU profiling, but enhancements specific to C++ AMP we hope will come at the Beta timeframe, which is when I'll be spending more time talking about it. (slide 35-36, 51:54-59:16) Demonstrate the GPU debugging experience in VS 11. Summary (slide 39) Re-iterate some of the points of slide 7, and add the point that the C++ AMP spec will be open for other compiler vendors to implement, even on other platforms (in fact, Microsoft is actively working on that). (slide 40) Links to content – see slide – including where all your questions should go: http://social.msdn.microsoft.com/Forums/en/parallelcppnative/threads.   "But I don't have time for a full blown session, I only need 2 (or just 1, or 3) C++ AMP slides to use in my session on related topic X" If all you want is a small number of slides, you can take some from the session above and customize them. But because I am so nice, I have created some slides for you, including talking points in the notes section. Download them here. Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• Generate texture for a heightmap

  - by James

  I've recently been trying to blend multiple textures based on the height at different points in a heightmap. However i've been getting poor results. I decided to backtrack and just attempt to recreate one single texture from an SDL_Surface (i'm using SDL) and just send that into opengl. I'll put my code for creating the texture and reading the colour values. It is a 24bit TGA i'm loading, and i've confirmed that the rest of my code works because i was able to send the surfaces pixels directly to my createTextureFromData function and it drew fine. struct RGBColour { RGBColour() : r(0), g(0), b(0) {} RGBColour(unsigned char red, unsigned char green, unsigned char blue) : r(red), g(green), b(blue) {} unsigned char r; unsigned char g; unsigned char b; }; // main loading code SDLSurfaceReader* reader = new SDLSurfaceReader(m_renderer); reader->readSurface("images/grass.tga"); // new texture unsigned char* newTexture = new unsigned char[reader->m_surface->w * reader->m_surface->h * 3 * reader->m_surface->w]; for (int y = 0; y < reader->m_surface->h; y++) { for (int x = 0; x < reader->m_surface->w; x += 3) { int index = (y * reader->m_surface->w) + x; RGBColour colour = reader->getColourAt(x, y); newTexture[index] = colour.r; newTexture[index + 1] = colour.g; newTexture[index + 2] = colour.b; } } unsigned int id = m_renderer->createTextureFromData(newTexture, reader->m_surface->w, reader->m_surface->h, RGB); // functions for reading pixels RGBColour SDLSurfaceReader::getColourAt(int x, int y) { Uint32 pixel; Uint8 red, green, blue; RGBColour rgb; pixel = getPixel(m_surface, x, y); SDL_LockSurface(m_surface); SDL_GetRGB(pixel, m_surface->format, &red, &green, &blue); SDL_UnlockSurface(m_surface); rgb.r = red; rgb.b = blue; rgb.g = green; return rgb; } // this function taken from SDL documentation // http://www.libsdl.org/cgi/docwiki.cgi/Introduction_to_SDL_Video#getpixel Uint32 SDLSurfaceReader::getPixel(SDL_Surface* surface, int x, int y) { int bpp = m_surface->format->BytesPerPixel; Uint8 *p = (Uint8*)m_surface->pixels + y * m_surface->pitch + x * bpp; switch (bpp) { case 1: return *p; case 2: return *(Uint16*)p; case 3: if (SDL_BYTEORDER == SDL_BIG_ENDIAN) return p[0] << 16 | p[1] << 8 | p[2]; else return p[0] | p[1] << 8 | p[2] << 16; case 4: return *(Uint32*)p; default: return 0; } } I've been stumped at this, and I need help badly! Thanks so much for any advice.

  Read the article

• WiFi stops working after a while in Lenovo ThinkPad W520 (Ubuntu 12.04)

  - by el10780

  After several minutes(I do not know how many) there is no internet connection on my laptop via Wi-Fi.Ubuntu doesn't show any kind of message that my WiFi was disconnected neither there is a signal drop,but suddenly Firefox stops connecting to web pages.I checked my modem/router and it seems that it is working fine.I tried also to reboot the WiFi device and nothing happens.The only thing that it makes it work again is a reboot of the system and if I do not want to do a reboot then I am enforced to connect to the Internet using Ethernet cable.Does anybody know what is happening? ## Some Hardware info that might be helpful ## el10780@ThinkPad-W520:~$ sudo lshw -class network *-network description: Ethernet interface product: 82579LM Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 04 serial: f0:de:f1:f1:be:10 size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=1.5.1-k duplex=full firmware=0.13-3 ip=192.168.0.10 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:50 memory:f3a00000-f3a1ffff memory:f3a2b000-f3a2bfff ioport:6080(size=32) *-network description: Wireless interface product: Centrino Advanced-N + WiMAX 6250 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 5e serial: 64:80:99:63:14:74 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-26-generic firmware=41.28.5.1 build 33926 ip=192.168.0.6 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn resources: irq:52 memory:f3900000-f3901fff *-network description: Ethernet interface physical id: 1 bus info: usb@2:1.3 logical name: wmx0 serial: 00:1d:e1:53:b2:e8 capabilities: ethernet physical configuration: driver=i2400m firmware=i6050-fw-usb-1.5.sbcf link=no el10780@ThinkPad-W520:~$ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:16.3 Serial controller: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b4) 00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b4) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [Quadro 1000M] (rev a1) 03:00.0 Network controller: Intel Corporation Centrino Advanced-N + WiMAX 6250 (rev 5e) 0d:00.0 System peripheral: Ricoh Co Ltd Device e823 (rev 08) 0d:00.3 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 PCIe IEEE 1394 Controller (rev 04) 0e:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) el10780@ThinkPad-W520:~$ rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no 3: i2400m-usb:2-1.3:1.0: WiMAX Soft blocked: yes Hard blocked: no The weirdest thing is this screenshot which I took after running the **Additional Drivers** program.I mean I have a NVidia Quadro 1000M and my Intel Centrino WiFi Card and this shows that there are not proprietay drivers for my system. http://imageshack.us/photo/my-images/268/screenshotfrom201207062.png/

  Read the article

• Need help partitioning when reinstalling Ubuntu 14.04

  - by Chris M.

  I upgraded to 14.04 about a month ago on my HP Mini netbook (about 16 GB hard disk). A few days ago the system crashed (I don't know why but I was using internet at the time). When I restarted the computer, Ubuntu would not load. Instead, I got a message from the BIOS saying Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key I took this to mean that I needed to reinstall 14.04. When I try to reinstall Ubuntu from the USB stick, I choose "Erase disk and install Ubuntu" but then I get a message: Some of the partitions you created are too small. Please make the following partitions at least this large: / 3.3 GB If you do not go back to the partitioner and increase the size of these partitions, the installation may fail. At first I hit Continue to see if it would install anyway, and it gave the message: The attempt to mount a file system with type ext4 in SCSI1 (0,0,0), partition # 1 (sda) at / failed. You may resume partitioning from the partitioning menu. The second time I hit Go Back, and it took me to the following partitioning table: Device Type Mount Point Format Size Used System /dev/sda /dev/sda1 ext4 (checked) 3228 MB Unknown /dev/sda5 swap (not checked) 1063 MB Unknown + - Change New Partition Table... Revert Device for boot loader installation: /dev/sda ATA JM Loader 001 (4.3 GB) At this point I'm not sure what to do. I've never partitioned my hard drive before and I don't want to screw things up. (I'm not particularly tech savvy.) Can you instruct me what I should do. (P.S. I'm afraid the table might not appear as I typed it in.) Results from fdisk: ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 4294 MB, 4294967296 bytes 255 heads, 63 sectors/track, 522 cylinders, total 8388608 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sda doesn't contain a valid partition table Disk /dev/sdb: 7860 MB, 7860125696 bytes 155 heads, 31 sectors/track, 3194 cylinders, total 15351808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009a565 Device Boot Start End Blocks Id System /dev/sdb1 * 2768 15351807 7674520 b W95 FAT32 ubuntu@ubuntu:~$ Here is what it displays when I open the Disks utility (I tried the screenshot terminal command you suggested but it didn't seem to do anything): 4.3 GB Hard Disk /dev/sda Model: JM Loader 001 (01000001) Size: 4.3 GB (4,294,967,296 bytes) Serial Number: 01234123412341234 Assessment: SMART is not supported Volumes Size: 4.3 GB (4,294,967,296 bytes) Device: /dev/sda Contents: Unknown (There is a button in the utility that when you click it gives the following options: Format... Create Disk Image... Restore Disk Image... Benchmark but SMART Data & Self-Tests... is dimmed out) When I hit F9 Change Boot Device Order, it shows the hard drive as: SATA:PM-JM Loader 001 When I hit F10 to get me into the BIOS Setup Utility, under Diagnostic it shows: Primary Hard Disk Self Test Not Support NetworkManager Tool State: disconnected Device: eth0 Type: Wired Driver: atl1c State: unavailable Default: no HW Address: 00:26:55:B0:7F:0C Capabilities: Carrier Detect: yes Wired Properties Carrier: off When I run command lshw -C network, I get: WARNING: you should run this program as super-user. *-network description: Network controller product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:01:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:16 memory:feafc000-feafffff *-network description: Ethernet interface product: AR8132 Fast Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: c0 serial: 00:26:55:b0:7f:0c capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.1-NAPI latency=0 link=no multicast=yes port=twisted pair resources: irq:43 memory:febc0000-febfffff ioport:ec80(size=128) WARNING: output may be incomplete or inaccurate, you should run this program as super-user.

  Read the article

• Is there a way to install i386 packages w/ it's i386 dependencies?

  - by foh1981

  I'm using Ubuntu 11.10 64-bit and I wish to install the CAD application DraftSight, which as of now only come in a 32-bit .deb file. I have installed this with some success before, but since 11.10 supports multiarch I would like to install the i386 versions of DraftSights dependencies. Ubuntu Software Center cannot handle the file, nor gdebi-gtk ('wrong architecture'). I can use dpkg with --force-architecture but there's A LOT of dependencies which I need to manually install afterward. Is there a way to automatically install these? Or semi-automatically with a script of some sort? (I'm thinking something along the lines of extracting the dependencies and adding :i386 and then feed that to apt-get or something...) Below is the output of dpkg-deb --info of the package in question. Package: dassault-systemes-draftsight Version: 2011.7.1198 Section: applications Priority: extra Architecture: i386 Pre-Depends: libexpat1 (>=2.0.1-4), libglib2.0-0 (>=2.22.3-0), libpcre3 (>=7.8-3), libselinux1 (>=2.0.85-2), zlib1g (>=1:1.2.3.3.dfsg-13), libc6 (>=2.10.1-0), libx11-6 (>=2:1.2.2-1), libxau6 (>=1:1.0.4-2), libxcomposite1 (>=1:0.4.0-4), libxcursor1 (>=1:1.1.9-1build1), libxdamage1 (>=1:1.1.1-4), libxdmcp6 (>=1:1.0.2-3), libxext6 (>=2:1.0.99.1-0), libxfixes3 (>=1:4.0.3-2build1), libxi6 (>=2:1.2.1-2), libxinerama1 (>=2:1.0.3-2), libxrandr2 (>=2:1.3.0-2), libxrender1 (>=1:0.9.4-2), libatk1.0-0 (>=1.28.0-0), libcairo2 (>=1.8.8-2), libdirectfb-extra (>=1.2.7-2), libfontconfig1 (>=2.6.0-1), libfreetype6 (>=2.3.9-5), libgtk2.0-0 (>=2.18.3-1), libpango1.0-0 (>=1.26.0-1), libpixman-1-0 (>=0.14.0-1), libpng12-0 (>=1.2.37-1), libxcb-render-util0 (>=0.3.6-1), libxcb-render0 (>=1.4-1), libxcb1 (>=1.4-1), debconf (>= 1.1) | debconf-2.0 Depends: libcomerr2 (>=1.41.9-1), libdbus-1-3 (>=1.2.16-0), libexpat1 (>=2.0.1-4), libgcc1 (>=1:4.4.1-4), libgcrypt11 (>=1.4.4-2), libglib2.0-0 (>=2.22.3-0), libgpg-error0 (>=1.6-1), libkeyutils1 (>=1.2-10), libpcre3 (>=7.8-3), libuuid1 (>=2.16-1), zlib1g (>=1:1.2.3.3.dfsg-13), libc6 (>=2.10.1-0), libgl1-mesa-glx (>=7.6.0-1), libglu1-mesa (>=7.6.0-1), libice6 (>=2:1.0.5-1), libsm6 (>=2:1.1.0-2), libx11-6 (>=2:1.2.2-1), libxau6 (>=1:1.0.4-2), libxdamage1 (>=1:1.1.1-4), libxdmcp6 (>=1:1.0.2-3), libxext6 (>=2:1.0.99.1-0), libxfixes3 (>=1:4.0.3-2build1), libxrender1 (>=1:0.9.4-2), libxt6 (>=1:1.0.5-3), libxxf86vm1 (>=1:1.0.2-1), libaudio2 (>=1.9.2-1), libavahi-client3 (>=0.6.25-1), libavahi-common3 (>=0.6.25-1), libcups2 (>=1.4.1-5), libdrm2 (>=2.4.14-1), libfontconfig1 (>=2.6.0-1), libgnutls26 (>=2.8.3-2), libgssapi-krb5-2 (>=1.7dfsg~beta3-1), libk5crypto3 (>=1.7dfsg~beta3-1), libkrb5-3 (>=1.7dfsg~beta3-1), libkrb5support0 (>=1.7dfsg~beta3-1), libstdc++6 (>=4.4.1-4), libtasn1-3 (>=2.2-1), libxcb1 (>=1.4-1), sendmail Installed-Size: 284948 Maintainer: Dassault Systemes <[email protected]> Homepage: www.3ds.com Description: With DraftSight, you can easily create professional CAD drawings. Supported file formats are DWT, DXF and DWG.

  Read the article

• T-SQL (SCD) Slowly Changing Dimension Type 2 using a merge statement

  - by AtulThakor

  Working on stored procedure recently which loads records into a data warehouse I found that the existing record was being expired using an update statement followed by an insert to add the new active record. Playing around with the merge statement you can actually expire the current record and insert a new record within one clean statement. This is how the statement works, we do the normal merge statement to insert a record when there is no match, if we match the record we update the existing record by expiring it and deactivating. At the end of the merge statement we use the output statement to output the staging values for the update,  we wrap the whole merge statement within an insert statement and add new rows for the records which we inserted. I’ve added the full script at the bottom so you can paste it and play around.   1: INSERT INTO ExampleFactUpdate 2: (PolicyID, 3: Status) 4: SELECT -- these columns are returned from the output statement 5: PolicyID, 6: Status 7: FROM 8: ( 9: -- merge statement on unique id in this case Policy_ID 10: MERGE dbo.ExampleFactUpdate dp 11: USING dbo.ExampleStag s 12: ON dp.PolicyID = s.PolicyID 13: WHEN NOT MATCHED THEN -- when we cant match the record we insert a new record record and this is all that happens 14: INSERT (PolicyID,Status) 15: VALUES (s.PolicyID, s.Status) 16: WHEN MATCHED --if it already exists 17: AND ExpiryDate IS NULL -- and the Expiry Date is null 18: THEN 19: UPDATE 20: SET 21: dp.ExpiryDate = getdate(), --we set the expiry on the existing record 22: dp.Active = 0 -- and deactivate the existing record 23: OUTPUT $Action MergeAction, s.PolicyID, s.Status -- the output statement returns a merge action which can 24: ) MergeOutput -- be insert/update/delete, on our example where a record has been updated (or expired in our case 25: WHERE -- we'll filter using a where clause 26: MergeAction = 'Update'; -- here   Complete source for example 1: if OBJECT_ID('ExampleFactUpdate') > 0 2: drop table ExampleFactUpdate 3:  4: Create Table ExampleFactUpdate( 5: ID int identity(1,1), 3: go 6: PolicyID varchar(100), 7: Status varchar(100), 8: EffectiveDate datetime default getdate(), 9: ExpiryDate datetime, 10: Active bit default 1 11: ) 12:  13:  14: insert into ExampleFactUpdate( 15: PolicyID, 16: Status) 17: select 18: 1, 19: 'Live' 20:  21: /*Create Staging Table*/ 22: if OBJECT_ID('ExampleStag') > 0 23: drop table ExampleStag 24: go 25:  26: /*Create example fact table */ 27: Create Table ExampleStag( 28: PolicyID varchar(100), 29: Status varchar(100)) 30:  31: --add some data 32: insert into ExampleStag( 33: PolicyID, 34: Status) 35: select 36: 1, 37: 'Lapsed' 38: union all 39: select 40: 2, 41: 'Quote' 42:  43: select * 44: from ExampleFactUpdate 45:  46: select * 47: from ExampleStag 48:  49:  50: INSERT INTO ExampleFactUpdate 51: (PolicyID, 52: Status) 53: SELECT -- these columns are returned from the output statement 54: PolicyID, 55: Status 56: FROM 57: ( 58: -- merge statement on unique id in this case Policy_ID 59: MERGE dbo.ExampleFactUpdate dp 60: USING dbo.ExampleStag s 61: ON dp.PolicyID = s.PolicyID 62: WHEN NOT MATCHED THEN -- when we cant match the record we insert a new record record and this is all that happens 63: INSERT (PolicyID,Status) 64: VALUES (s.PolicyID, s.Status) 65: WHEN MATCHED --if it already exists 66: AND ExpiryDate IS NULL -- and the Expiry Date is null 67: THEN 68: UPDATE 69: SET 70: dp.ExpiryDate = getdate(), --we set the expiry on the existing record 71: dp.Active = 0 -- and deactivate the existing record 72: OUTPUT $Action MergeAction, s.PolicyID, s.Status -- the output statement returns a merge action which can 73: ) MergeOutput -- be insert/update/delete, on our example where a record has been updated (or expired in our case 74: WHERE -- we'll filter using a where clause 75: MergeAction = 'Update'; -- here 76:  77:  78: select * 79: from ExampleFactUpdate 80: 

  Read the article

• ORE graphics using Remote Desktop Protocol

  - by Sherry LaMonica

  Oracle R Enterprise graphics are returned as raster, or bitmap graphics. Raster images consist of tiny squares of color information referred to as pixels that form points of color to create a complete image. Plots that contain raster images render quickly in R and create small, high-quality exported image files in a wide variety of formats. However, it is a known issue that the rendering of raster images can be problematic when creating graphics using a Remote Desktop connection. Raster images do not display in the windows device using Remote Desktop under the default settings. This happens because Remote Desktop restricts the number of colors when connecting to a Windows machine to 16 bits per pixel, and interpolating raster graphics requires many colors, at least 32 bits per pixel.. For example, this simple embedded R image plot will be returned in a raster-based format using a standalone Windows machine:  R> library(ORE) R> ore.connect(user="rquser", sid="orcl", host="localhost", password="rquser", all=TRUE)  R> ore.doEval(function() image(volcano, col=terrain.colors(30))) Here, we first load the ORE packages and connect to the database instance using database login credentials. The ore.doEval function executes the R code within the database embedded R engine and returns the image back to the client R session. Over a Remote Desktop connection under the default settings, this graph will appear blank due to the restricted number of colors. Users who encounter this issue have two options to display ORE graphics over Remote Desktop: either raise Remote Desktop's Color Depth or direct the plot output to an alternate device. Option #1: Raise Remote Desktop Color Depth setting In a Remote Desktop session, all environment variables, including display variables determining Color Depth, are determined by the RCP-Tcp connection settings. For example, users can reduce the Color Depth when connecting over a slow connection. The different settings are 15 bits, 16 bits, 24 bits, or 32 bits per pixel. To raise the Remote Desktop color depth: On the Windows server, launch Remote Desktop Session Host Configuration from the Accessories menu.Under Connections, right click on RDP-Tcp and select Properties.On the Client Settings tab either uncheck LimitMaximum Color Depth or set it to 32 bits per pixel. Click Apply, then OK, log out of the remote session and reconnect.After reconnecting, the Color Depth on the Display tab will be set to 32 bits per pixel.  Raster graphics will now display as expected. For ORE users, the increased color depth results in slightly reduced performance during plot creation, but the graph will be created instead of displaying an empty plot. Option #2: Direct plot output to alternate device Plotting to a non-windows device is a good option if it's not possible to increase Remote Desktop Color Depth, or if performance is degraded when creating the graph. Several device drivers are available for off-screen graphics in R, such as postscript, pdf, and png. On-screen devices include windows, X11 and Cairo. Here we output to the Cairo device to render an on-screen raster graphic.  The grid.raster function in the grid package is analogous to other grid graphical primitives - it draws a raster image within the current plot's grid.  R> options(device = "CairoWin") # use Cairo device for plotting during the session R> library(Cairo) # load Cairo, grid and png libraries  R> library(grid) R> library(png)  R> res <- ore.doEval(function()image(volcano,col=terrain.colors(30))) # create embedded R plot  R> img <- ore.pull(res, graphics = TRUE)$img[[1]] # extract image  R> grid.raster(as.raster(readPNG(img)), interpolate = FALSE) # generate raster graph R> dev.off() # turn off first device   By default, the interpolate argument to grid.raster is TRUE, which means that what is actually drawn by R is a linear interpolation of the pixels in the original image. Setting interpolate to FALSE uses a sample from the pixels in the original image.A list of graphics devices available in R can be found in the Devices help file from the grDevices package: R> help(Devices)

  Read the article

• Libgdx 2D Game, Random generated World of random size, how to get mouse coordinates?

  - by Solom

  I'm a noob and English is not my mothertongue, so please bear with me! I'm generating a map for a Sidescroller out of a 2D-array. That is, the array holds different values and I create blocks based on that value. Now, my problem is to match mouse coordinates on screen with the actual block the mouse is pointing at. public class GameScreen implements Screen { private static final int WIDTH = 100; private static final int HEIGHT = 70; private OrthographicCamera camera; private Rectangle glViewport; private Spritebatch spriteBatch; private Map map; private Block block; ... @Override public void show() { camera = new OrthographicCamera(WIDTH, HEIGHT); camera.position.set(WIDTH/2, HEIGHT/2, 0); glViewport = new Rectangle(0, 0, WIDTH, HEIGHT); map = new Map(16384, 256); map.printTileMap(); // Debugging only spriteBatch = new SpriteBatch(); } @Override public void render(float delta) { // Clear previous frame Gdx.gl.glClearColor(1, 1, 1, 1 ); Gdx.gl.glClear(GL20.GL_COLOR_BUFFER_BIT); GL30 gl = Gdx.graphics.getGL30(); // gl.glViewport((int) glViewport.x, (int) glViewport.y, (int) glViewport.width, (int) glViewport.height); spriteBatch.setProjectionMatrix(camera.combined); camera.update(); spriteBatch.begin(); // Draw Map this.drawMap(); // spriteBatch.flush(); spriteBatch.end(); } private void drawMap() { for(int a = 0; a < map.getHeight(); a++) { // Bounds check (y) if(camera.position.y + camera.viewportHeight < a)// || camera.position.y - camera.viewportHeight > a) break; for(int b = 0; b < map.getWidth(); b++) { // Bounds check (x) if(camera.position.x + camera.viewportWidth < b)// || camera.position.x > b) break; // Dynamic rendering via BlockManager int id = map.getTileMap()[a][b]; Block block = BlockManager.map.get(id); if(block != null) // Check if Air { block.setPosition(b, a); spriteBatch.draw(block.getTexture(), b, a, 1 ,1); } } } } As you can see, I don't use the viewport anywhere. Not sure if I need it somewhere down the road. So, the map is 16384 blocks wide. One block is 16 pixels in size. One of my naive approaches was this: if(Gdx.input.isButtonPressed(Input.Buttons.LEFT)) { Vector3 mousePos = new Vector3(); mousePos.set(Gdx.input.getX(), Gdx.input.getY(), 0); camera.unproject(mousePos); System.out.println(Math.round(mousePos.x)); // *16); // Debugging // TODO: round // map.getTileMap()[mousePos.x][mousePos.y] = 2; // Draw at mouse position } I confused myself somewhere down the road I fear. What I want to do is, update the "block" (or rather the information in the Map/2D-Array) so that in the next render() there is another block. Basically drawing on the spriteBatch g So if anyone could point me in the right direction this would be highly appreciated. Thanks!

  Read the article

• Faster Memory Allocation Using vmtasks

  - by Steve Sistare

  You may have noticed a new system process called "vmtasks" on Solaris 11 systems: % pgrep vmtasks 8 % prstat -p 8 PID USERNAME SIZE RSS STATE PRI NICE TIME CPU PROCESS/NLWP 8 root 0K 0K sleep 99 -20 9:10:59 0.0% vmtasks/32 What is vmtasks, and why should you care? In a nutshell, vmtasks accelerates creation, locking, and destruction of pages in shared memory segments. This is particularly helpful for locked memory, as creating a page of physical memory is much more expensive than creating a page of virtual memory. For example, an ISM segment (shmflag & SHM_SHARE_MMU) is locked in memory on the first shmat() call, and a DISM segment (shmflg & SHM_PAGEABLE) is locked using mlock() or memcntl(). Segment operations such as creation and locking are typically single threaded, performed by the thread making the system call. In many applications, the size of a shared memory segment is a large fraction of total physical memory, and the single-threaded initialization is a scalability bottleneck which increases application startup time. To break the bottleneck, we apply parallel processing, harnessing the power of the additional CPUs that are always present on modern platforms. For sufficiently large segments, as many of 16 threads of vmtasks are employed to assist an application thread during creation, locking, and destruction operations. The segment is implicitly divided at page boundaries, and each thread is given a chunk of pages to process. The per-page processing time can vary, so for dynamic load balancing, the number of chunks is greater than the number of threads, and threads grab chunks dynamically as they finish their work. Because the threads modify a single application address space in compressed time interval, contention on locks protecting VM data structures locks was a problem, and we had to re-scale a number of VM locks to get good parallel efficiency. The vmtasks process has 1 thread per CPU and may accelerate multiple segment operations simultaneously, but each operation gets at most 16 helper threads to avoid monopolizing CPU resources. We may reconsider this limit in the future. Acceleration using vmtasks is enabled out of the box, with no tuning required, and works for all Solaris platform architectures (SPARC sun4u, SPARC sun4v, x86). The following tables show the time to create + lock + destroy a large segment, normalized as milliseconds per gigabyte, before and after the introduction of vmtasks: ISM system ncpu before after speedup ------ ---- ------ ----- ------- x4600 32 1386 245 6X X7560 64 1016 153 7X M9000 512 1196 206 6X T5240 128 2506 234 11X T4-2 128 1197 107 11x DISM system ncpu before after speedup ------ ---- ------ ----- ------- x4600 32 1582 265 6X X7560 64 1116 158 7X M9000 512 1165 152 8X T5240 128 2796 198 14X (I am missing the data for T4 DISM, for no good reason; it works fine). The following table separates the creation and destruction times: ISM, T4-2 before after ------ ----- create 702 64 destroy 495 43 To put this in perspective, consider creating a 512 GB ISM segment on T4-2. Creating the segment would take 6 minutes with the old code, and only 33 seconds with the new. If this is your Oracle SGA, you save over 5 minutes when starting the database, and you also save when shutting it down prior to a restart. Those minutes go directly to your bottom line for service availability.

  Read the article

• 11???OTN?????????????&???? (10/24 ??)

  - by OTN-J Master

  ???????????????????????????????????????????????????????????????????????????? ???11????????????????????????????????????????????????????????????????????????????????????????????11?????????????????????????????????????????Oracle DBA & Developer Day??14?????????????????????????????????????????????????????????????????????????????????????????????????????????!10??????????? ?10/24???????? Oracle Database Appliance??? 11?6?(?)15:30 ~ 17:00 @ ??????????(??????)??????????????????????????????????·?????Oracle Database Appliance????????????????????????????????????????????????Oracle Database Appliance?????·???????????????·??????????????????????????Oracle Database Appliance????????????????? ?????!?????????????????? 11?7?(?)13:30 ~ 17:10 @  ??????????(??????)????????Oracle Database 11g Release2??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????·????????????????????????????? ???Java?3?????!Java?????? 11?12?(?)14:30 ~ 17:30 @  ??????????(??????)????????????????????????????????????·?????????????Java???????????????????Java???????????????????????????????????????????????????????????????????????? ?????????????????Java?????????????????????????????????????Java????????????????????????????? JPOUG Tech Talk Night #3 “Upgrade, Migrate and Consolidate to Oracle Database 12c(?)” 11?12?(?)19:00 ~20:30 @ ??????????(??·???) ???????? JPOUG??????????????????????????US?Oracle ????? 2?????Oracle Database 12c??????????????????????? ???????Oracle OpenWorld?????????????????????? ???????????Web??????????????????????? ??????????????????????????????????! ????! ???????? ~WebLogic Server???????????~ ]?1?] ???????????????11?13?(?)18:30 ~20:00 @ ?????? ????????????(??)?WebLogic Server ??????????????????Java???????????????Java EE??????WebLogic Server?JVM???????????????????????????????????????????????WebLogic Server???????????????????WebLogic Server?????????????????????????????????????11g(10.3.6)????12c(12.1.2)??????????????????????????????? ??????WebLogic Server???????????!Oracle DBA & Developer Day 2013 11?14?(?) @ ???????????(??·???)Oracle Database?Oracle WebLogic Server?Oracle Coherence?Oracle Solaris??????????????????????????????????????1?????????????????????????? ??????????????????????·????????????????????????????????6???????????????· Oracle Database - ???????·???????????????·????· Oracle Database - ??????·??????????· Oracle Database - ??????????· Oracle Database 12c?????? (Oracle University??)· Oracle Fusion Middleware????????· Oracle Solaris?Oracle Hardware????????? ">????!????????????????????????11?19?(?)14:30 ~ 16:50 @ ??????????(??????)??????????????????????????????????????????????????????????????????????????????????????????????????????? ???? ??????????????????????????????????????????????????????????????????????????????????????????????????????????E??????????????????????????????????????????????????????????? ????~!!?????????????????!~????????????~?presented by ???? 11?20?(?)18:30~20:00 @ ?????????? ???? ???????(??)????·??????????????????????????????????????????????????????????????!???????????????Oracle??????????????????????????????????Oracle Database ?????????????????????????????????????????Database Configuration Assitant??????????????????????????????????????????????? ??Oracle Database????????????????????????????????????????Database??(??·???·??????)???????????????????????!?????! ?????????/???????????? 11?21?(?)10:00 ~ 17:30 @ ??????????(??????)?Oracle Application Testing Suite??Web?????????????????????????????????????????????????????????????????????????????????????????????????????????????????Oracle Application Testing Suite?????????????????????????????????????????????????????Oracle Exadata ???? ???? 11?21?(?)13:30 ~ 17:30 @ ??????????(??????)11?28?(?)13:30 ~ 17:30 @ ?????? ????????????(??)?????????????????Oracle Exadata X3 Database In-Memory Machine???·????????????????????????????????????????????????????????????????????Oracle Exadata????????????????????????????????????????????????????????????????? ?! Click??????? in ?? ~90?????! Oracle Database 12c??? & Oracle Database ??????? ~11?22?(?)13:30~16:50 @  ???????? 406???????Oracle Database ??????????????????????????·????????????????????????????? Oracle Database12c ?????90?????????! ???????????? ~Oracle Database 12c ??? ??? ~11?27?(?)18:30 ~20:00 @ ?????????????????(???)Oracle ???????SQL????????????????????????????????????SQL?????????????????????Oracle Database 12c?????????????????????????????????????????????????????????Oracle Database 12c???????????????11g?????????????? ???????????35???? ~??????·??????&Oracle Database?????? ~11?29?(?)13:30 ~16:40 @ RCC?????? 7F 704???(??)?35?????????????????? Oracle?????????????·?????? ?Enterprise Manager???????????????Tips ?????????????????!?????????????????!!

  Read the article

• Binding Image.Source to String in WPF ?

  - by Mohammad

  I have below XAML code : <Window x:Class="WpfApplication1.Window1" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" DataContext="{Binding RelativeSource={RelativeSource Self}}" WindowStartupLocation="CenterScreen" Title="Window1" Height="300" Width="300"> <Grid> <Image x:Name="TestImage" Source="{Binding Path=ImageSource}" /> </Grid> </Window> Also, there is a method that makes an Image from a Base64 string : Image Base64StringToImage(string base64ImageString) { try { byte[] b; b = Convert.FromBase64String(base64ImageString); MemoryStream ms = new System.IO.MemoryStream(b); System.Drawing.Image img = System.Drawing.Image.FromStream(ms); ////////////////////////////////////////////// //convert System.Drawing.Image to WPF image System.Drawing.Bitmap bmp = new System.Drawing.Bitmap(img); IntPtr hBitmap = bmp.GetHbitmap(); System.Windows.Media.ImageSource imageSource = System.Windows.Interop.Imaging.CreateBitmapSourceFromHBitmap(hBitmap, IntPtr.Zero, Int32Rect.Empty, BitmapSizeOptions.FromEmptyOptions()); Image wpfImage = new Image(); wpfImage.Source = imageSource; wpfImage.Width = wpfImage.Height = 16; ////////////////////////////////////////////// return wpfImage; } catch { Image img1 = new Image(); img1.Source = new BitmapImage(new Uri(@"/passwordManager;component/images/TreeView/empty-bookmark.png", UriKind.Relative)); img1.Width = img1.Height = 16; return img1; } } Now, I'm gonna bind TestImage to the output of Base64StringToImage method. I've used the following way : public string ImageSource { get; set; } ImageSource = Base64StringToImage("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").Source.ToString(); but nothing happen. How can I fix it ? BTW, I'm dead sure that the base64 string is correct

  Read the article

• How to programmatically create customcontrol and change its values in Silverlight 4

  - by user361317

  Hi! I want to create a custom tabcontrol class which has an icon before the text, and I want to be able to change the icon in the constructor of the new tabcontrol. I use implicit styles in Silverlight 4, and the custom tabcontrol should not have any xaml of its own, just the class and the implicit xaml style in my App.xaml. I cannot, however, get this to work. This is my code: <!-- Style for generic tabcontrols --> 20,0,0,0 <Style TargetType="controls:TabItem"> <Setter Property="IsTabStop" Value="False"/> <Setter Property="Background" Value="#FFDBEDFB"/> <Setter Property="BorderBrush" Value="#FFA3AEB9"/> <Setter Property="BorderThickness" Value="1"/> <Setter Property="Padding" Value="6,2,6,2"/> <Setter Property="HorizontalContentAlignment" Value="Stretch"/> <Setter Property="VerticalContentAlignment" Value="Stretch"/> <Setter Property="MinWidth" Value="5"/> <Setter Property="MinHeight" Value="5"/> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="controls:TabItem"> <Grid x:Name="Root" Cursor="Hand" Height="25"> <VisualStateManager.VisualStateGroups> <VisualStateGroup x:Name="CommonStates"> <VisualStateGroup.Transitions> <VisualTransition GeneratedDuration="0"/> <VisualTransition GeneratedDuration="0:0:0.1" To="MouseOver"/> </VisualStateGroup.Transitions> <VisualState x:Name="Normal"/> <VisualState x:Name="MouseOver"> <Storyboard> <DoubleAnimationUsingKeyFrames BeginTime="0" Duration="00:00:00.001" Storyboard.TargetName="FocusVisualTop" Storyboard.TargetProperty="(UIElement.Opacity)"> <SplineDoubleKeyFrame KeyTime="0" Value="0"/> </DoubleAnimationUsingKeyFrames> </Storyboard> </VisualState> <VisualState x:Name="Disabled"> <Storyboard> <DoubleAnimationUsingKeyFrames Storyboard.TargetName="DisabledVisualTopSelected" Storyboard.TargetProperty="(UIElement.Opacity)"> <SplineDoubleKeyFrame KeyTime="0" Value="1"/> </DoubleAnimationUsingKeyFrames> <DoubleAnimationUsingKeyFrames Storyboard.TargetName="DisabledVisualTopUnSelected" Storyboard.TargetProperty="(UIElement.Opacity)"> <SplineDoubleKeyFrame KeyTime="0" Value="1"/> </DoubleAnimationUsingKeyFrames> </Storyboard> </VisualState> </VisualStateGroup> <VisualStateGroup x:Name="SelectionStates"> <VisualState x:Name="Unselected"/> <VisualState x:Name="Selected"/> </VisualStateGroup> <VisualStateGroup x:Name="FocusStates"> <VisualState x:Name="Focused"> <Storyboard> <ObjectAnimationUsingKeyFrames Duration="0" Storyboard.TargetName="FocusVisualTop" Storyboard.TargetProperty="Visibility"> <DiscreteObjectKeyFrame KeyTime="0" Value="Visible"/> </ObjectAnimationUsingKeyFrames> </Storyboard> </VisualState> <VisualState x:Name="Unfocused"> <Storyboard> <ObjectAnimationUsingKeyFrames Duration="0" Storyboard.TargetName="FocusVisualElement" Storyboard.TargetProperty="Visibility"> <DiscreteObjectKeyFrame KeyTime="0" Value="Collapsed"/> </ObjectAnimationUsingKeyFrames> </Storyboard> </VisualState> </VisualStateGroup> </VisualStateManager.VisualStateGroups> <Grid x:Name="TemplateTopUnselected" Margin="1"> <Border x:Name="BorderTop" BorderThickness="1,1,1,0"> <Border x:Name="GradientTop" BorderThickness="1,1,1,0" CornerRadius="5,5,0,0"> <Border.BorderBrush> <LinearGradientBrush EndPoint="0.5,1" StartPoint="0.5,0"> <GradientStop Color="#FFB1CCEE" Offset="0"/> <GradientStop Color="#CCB1CCEE" Offset="1"/> </LinearGradientBrush> </Border.BorderBrush> <Border.Background> <LinearGradientBrush EndPoint="0.5,1" StartPoint="0.5,0"> <GradientStop Color="#FFCEE0F7" Offset="0.091"/> <GradientStop Color="#FFDEECFD" Offset="0.996"/> <GradientStop Color="White"/> </LinearGradientBrush> </Border.Background> <Grid Margin="3,3,3,2"> <Grid.RowDefinitions> <RowDefinition Height="16"/> </Grid.RowDefinitions> <Grid.ColumnDefinitions> <ColumnDefinition Width="16"/> <ColumnDefinition/> <ColumnDefinition Width="15"/> </Grid.ColumnDefinitions> <Image x:Name="TabInactiveIcon" Source="group.png" Margin="0" HorizontalAlignment="Center" VerticalAlignment="Center" Opacity="0.395"/> <ContentControl x:Name="HeaderTopUnselected" Cursor="{TemplateBinding Cursor}" Margin="3,0" FontSize="{TemplateBinding FontSize}" Foreground="#FF416AA3" IsTabStop="False" FontFamily="Tahoma" Grid.Column="1" HorizontalAlignment="Center" VerticalAlignment="Center"/> <Button x:Name="TabInactiveCloseButton" Template="{StaticResource TabItemCloseButton}" Cursor="Hand" Height="10" HorizontalAlignment="Right" Margin="0" VerticalAlignment="Top" Width="10" Content="Button" Grid.Column="2" d:LayoutOverrides="GridBox"/> </Grid> </Border> </Border> <Border x:Name="DisabledVisualTopUnSelected" IsHitTestVisible="false" Opacity="0" Background="#8CFFFFFF" CornerRadius="3,3,0,0"/> </Grid> <Border x:Name="FocusVisualElement" Margin="-1" IsHitTestVisible="false" Visibility="Collapsed" BorderBrush="#FF6DBDD1" BorderThickness="1" CornerRadius="3,3,0,0"/> <Grid x:Name="TemplateTopSelected" Margin="0,0,0,-3" Visibility="Collapsed"> <Border x:Name="BorderTop1" BorderThickness="1,1,1,0"> <Border x:Name="GradientTop1" BorderThickness="1,1,1,0" CornerRadius="5,5,0,0"> <Border.BorderBrush> <LinearGradientBrush EndPoint="0.5,1" StartPoint="0.5,0"> <GradientStop Color="#FFB1CCEE" Offset="0"/> <GradientStop Color="#CAB1CCEE" Offset="1"/> </LinearGradientBrush> </Border.BorderBrush> <Border.Background> <LinearGradientBrush EndPoint="0.5,1" StartPoint="0.5,0"> <GradientStop Color="#FFCEE0F7" Offset="0.091"/> <GradientStop Color="White" Offset="0.974"/> <GradientStop Color="White"/> </LinearGradientBrush> </Border.Background> <Grid Margin="3,3,3,2"> <Grid.RowDefinitions> <RowDefinition Height="16"/> </Grid.RowDefinitions> <Grid.ColumnDefinitions> <ColumnDefinition Width="16"/> <ColumnDefinition/> <ColumnDefinition Width="15"/> </Grid.ColumnDefinitions> <Image x:Name="TabActiveIcon" Source="user.png" Margin="0" HorizontalAlignment="Center" VerticalAlignment="Center"/> <ContentControl x:Name="HeaderTopSelected" Cursor="{TemplateBinding Cursor}" Margin="3,0" FontSize="{TemplateBinding FontSize}" Foreground="#FF416AA3" IsTabStop="False" FontFamily="Tahoma" FontWeight="Bold" Grid.Column="1" HorizontalAlignment="Center" VerticalAlignment="Center"/> <Button x:Name="TabActiveCloseButton" Template="{StaticResource TabActiveCloseButton}" Cursor="Hand" Height="10" HorizontalAlignment="Right" Margin="0" VerticalAlignment="Top" Width="10" Content="Button" Grid.Column="2" d:LayoutOverrides="GridBox"/> </Grid> </Border> </Border> <Border x:Name="FocusVisualTop" Margin="-2,-2,-2,0" IsHitTestVisible="false" Visibility="Collapsed" BorderThickness="1,1,1,0" CornerRadius="3,3,0,0"/> <Border x:Name="DisabledVisualTopSelected" Margin="-2,-2,-2,0" IsHitTestVisible="false" Opacity="0" Background="#8CFFFFFF" CornerRadius="3,3,0,0"/> </Grid> </Grid> </ControlTemplate> </Setter.Value> </Setter> </Style> and my class public class ClosableTabItem : TabItem { public static readonly DependencyProperty TabIconProperty = DependencyProperty.RegisterAttached("TabInactiveIcon", typeof(Image), typeof(ClosableTabItem), null); public Image TabIcon { get { return (Image)GetValue(ClosableTabItem.TabIconProperty); } set { SetValue(ClosableTabItem.TabIconProperty, value); } } public ClosableTabItem(string header, ContentControl content, TabItemIcons icon) { // I need to be able to set the header, content and icon here } private Image GetTabIcon(TabItemIcons icon) { Image img = new Image(); switch (icon) { case TabItemIcons.User: img.Source = new BitmapImage(new Uri("/icons/user.png", UriKind.Relative)); break; case TabItemIcons.Group: img.Source = new BitmapImage(new Uri("/icons/group.png", UriKind.Relative)); break; default: break; } return img; } } This is driving me nuts, and I can't find any examples where anyone has done this without having a xaml page for the custom tab. Is this even possible? Can someone point me in the right direction? Cheers! - jonah

  Read the article

• Solving Diophantine Equations Using Python

  - by HARSHITH

  In mathematics, a Diophantine equation (named for Diophantus of Alexandria, a third century Greek mathematician) is a polynomial equation where the variables can only take on integer values. Although you may not realize it, you have seen Diophantine equations before: one of the most famous Diophantine equations is: We are not certain that McDonald's knows about Diophantine equations (actually we doubt that they do), but they use them! McDonald's sells Chicken McNuggets in packages of 6, 9 or 20 McNuggets. Thus, it is possible, for example, to buy exactly 15 McNuggets (with one package of 6 and a second package of 9), but it is not possible to buy exactly 16 nuggets, since no non- negative integer combination of 6's, 9's and 20's adds up to 16. To determine if it is possible to buy exactly n McNuggets, one has to solve a Diophantine equation: find non-negative integer values of a, b, and c, such that 6a + 9b + 20c = n. Write an iterative program that finds the largest number of McNuggets that cannot be bought in exact quantity. Your program should print the answer in the following format (where the correct number is provided in place of n): "Largest number of McNuggets that cannot be bought in exact quantity: n"

  Read the article

< Previous Page | 102 103 104 105 106 107 108 109 110 111 112 113  | Next Page >