Search Results

Search found 48664 results on 1947 pages for 'internet access'.

Page 106/1947 | < Previous Page | 102 103 104 105 106 107 108 109 110 111 112 113  | Next Page >

  • Mobile Internet Modem Olivetti Olicard 155 does not work in Ubuntu 12.10

    - by João Fracassi
    I have a problem, I bought a 3G mobile modem, but does not work in Ubuntu 12.10, also did not work on Ubuntu 12.04. I installed the USB Modeswitch and has the same flaw, does not recognize the modem within the connection manager, I connect the modem to the USB port and wait up to 20 minutes and does not recognize the modem. I ran the command recognizes the modem and lsusb as "Bus 001 Device 007: ID 0b3c: C004 Olivetti TechCenter." Does anyone have this modem, you can help me solve the problem, or does anyone have a solution? Because the manufacturer does not support Linux and according to some forums usbmodeswitch supports esste model. Olivetti Olicard modem 155.

    Read the article

  • Migrate reports from MS Access to OOo Base

    - by John Gardeniers
    I'm currently looking at upgrading our office machines from Office XP to Office 2010. For most users the standard edition is fine but just a few of us use Access. There are only a couple of standalone Access databases but the program is used fairly extensively (mostly by myself) as a front end to MySQL. As the cost different between standard and pro versions of Office 2010 is about $170 (AUD) I'm looking at possible alternatives to Access. I'm no huge fan of Open Office but could be convinced to use it if I can find a way to migrate the many reports we currently have in Access. The data is not a problem. So far I've found nothing to suggest this is even possible/practical but perhaps someone here knows otherwise. I'm also open to suggestions for other alternatives to Access but it must be able to produce flexible reports easily. That is the one real strength of Access in my view. Because of its subjective nature I'm making this community wiki.

    Read the article

  • MacOSX VirtualHost: "You don't have permission to access / on this server" error

    - by David Casillas
    The Apache instalation of MacOSX is running Ok. I have tried to create a VirtualHost called test.local, but as soon as I uncomment from /private/etc/apache2/httpd.conf the line Include /private/etc/apache2/extra/httpd-vhosts.conf , and try to access test.local virtualhost I get an error "You don't have permission to access / on this server". The VirtualHost configuration in /private/etc/apache2/extra/httpd-vhosts.conf is: <VirtualHost *:80> ServerName test.local DocumentRoot "/Users/username/Sites/Test/public" <Directory "/Users/username/Sites/Test/public"> Options Indexes FollowSymLinks Includes AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> I have also include the VirtualHost in hosts file: 127.0.0.1 test.local

    Read the article

  • Is it possible to search an apt repository via a web browser?

    - by Bryan
    I've installed the beta version of Ubuntu 10.04 server edition (x64), but the system doesn't have an internet connection. Is there a way I can find out what packages are in the apt repository with nothing more than a web browser? The reason I'm asking, is because I will have an internet connection available when the production system goes live, but it simply isn't possible to internet connect my development system.

    Read the article

  • Can't access local network when connect to pppoe

    - by shantanu
    I am using DSL(PPPOE) connection in ubuntu. It has two part (I am not sure), when I just connect the cable, system automatically get an IP address started with 172.x.x.x(DHCP). When I connect using username/password (PPPOE) I get another IP started with 10.x.x.x and can access internet but can't access some local IP (in my LAN), which are some FTP, media server provided by my ISP. I complained about that to my ISP but they reply Windows is working It's true, Windows 7 is working fine with this settings. I can access internet and local server at the same time. Also I use a WIFI router (TP-link TL-WR340G/TL-WR340GD) which result the same problem. So when I connect cable directly to system and use Windows 7 than everything is fine. Otherwise problem. Similar problem discussed here. Edit before connect. route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 172.100.0.1 0.0.0.0 UG 0 0 0 eth0 172.100.0.0 0.0.0.0 255.255.0.0 U 1 0 0 eth0 after connect. Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 10.12.44.91 0.0.0.0 UG 0 0 0 ppp0 10.12.44.91 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 ifconfig after connect eth0 Link encap:Ethernet HWaddr 74:d0:2b:d5:b3:6c inet6 addr: fe80::76d0:2bff:fed5:b36c/64 Scope:Link inet6 addr: 2002:ac64:154:c:76d0:2bff:fed5:b36c/64 Scope:Global inet6 addr: fec0::c:76d0:2bff:fed5:b36c/64 Scope:Site UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:26582 errors:0 dropped:18 overruns:0 frame:0 TX packets:2340 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2542063 (2.5 MB) TX bytes:244938 (244.9 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:4118 errors:0 dropped:0 overruns:0 frame:0 TX packets:4118 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:336759 (336.7 KB) TX bytes:336759 (336.7 KB) ppp0 Link encap:Point-to-Point Protocol inet addr:10.12.44.95 P-t-P:10.12.44.91 Mask:255.255.255.255 inet6 addr: fe80::a536:c7ae:e079:d88d/10 Scope:Link UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1 RX packets:689 errors:0 dropped:0 overruns:0 frame:0 TX packets:744 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:385746 (385.7 KB) TX bytes:75296 (75.2 KB) I used network manager to create network(DSL connection)

    Read the article

  • Group Policy for IE Security Zones

    - by Doug Luxem
    We are currently using the following Group Policy to control the Internet Explorer security zones: User Configuration\Administrative Templates\Windows Components\Internet Explorer\Internet Control Panel\Security Page Then setting the Site to Zone Assignment List with the various values using the following chart: Value Setting ------------------------------ 0 My Computer 1 Local Intranet Zone 2 Trusted sites Zone 3 Internet Zone 4 Restricted Sites Zone This works well; however, users are then unable to edit (or especially add) to their zone settings. Is there a way to lock in our custom zone settings while still giving users the ability to add their own sites to the security zones? Yes, I do realize the slight security risk in opening this up.

    Read the article

  • Can connect to shared folder on Windows Server 2012, but access denied when accessing

    - by Cylindric
    I have a Windows Server 2012 (non-domain) with a folder that's shared out as TestShare. The share permissions are Everyone has full access, and there is a local user TestUser that has full access to the actual folder. On GuestServer I can connect and/or map a drive to \HostServer\TestShare, specifying the username and password for TestUser. NTFS permissions: Share permissions Effective Access Report The problem is that when I try to access the folder, I get an "access denied" message. On the host server I can see the user connected to the share in the Sessions manager, so the password is correct and being recognised. If I use an incorrect password I don't get the "completed successfully" message, nor the 'open session'. What else can be blocking access to the shared files, when the share seems to be set, and the folder permissions seem to be set, and the connection seems to be okay? The network is recognised as "public", and the relevant firewall rules seem to be enabled - even disabling the firewall doesn't help.

    Read the article

  • I see files in filezilla, but the internet denies their existance

    - by Zach L.
    I am doing some updates to a 10-year old site, and I am baffled. Everything worked great locally, so I uploaded a bunch of stuff to the server using filezilla. Within filezilla I can see all of the files, but for some reason I get a 404 when trying to view them. It seems as though (at least for the folder Im currently checking) this is happening for items which are "farther down the list" alphabetically. I tried to re-upload a file individually but it didn't change anything. Is this an indication that I hit some sort of limit with the hosting company? And if so why can I still view the files from filezilla? Please offer guidance. I am at a loss.

    Read the article

  • Access Control Management Tool ACM.exe

    - by kaleidoscope
    The Access Control Management Tool (Acm.exe) is a command-line tool you can use to perform management operations (CREATE, UPDATE, GET, GET ALL, and DELETE) on the AppFabric Access Control entities (scopes, issuers, token policies, and rules). Basic Syntax The command line for Acm.exe follows the basic pattern of verb-noun. For example: acm.exe <command> <resource> [-option:<option value>] This tool will automatically generate random keys, which helps ensure that they can't easily be guessed by an attacker. Note that ACM.EXE is a thin wrapper around a REST Web Service (the AC management service). That helps to remember the commands it accepts, which are the typical resource management commands for a REST service: · Get(All) · Create · Update · Delete ACM.EXE.config file can be used to configure Host, Service and the Management key for a Service Namespace. Geeta, G

    Read the article

  • Unable to print login-required images in IE

    - by Tim Fountain
    I have some images in a section of a site that require the user to be logged in in order to view. These images are served by a PHP script, which checks the user's login state and if valid, serves the binary data with the appropriate headers. This all works fine. The issue comes when a user tries to print one of these images. In Internet Explorer, when they go to print preview they get the broken image box with a red cross in the corner instead of the actual file. This is what gets printed also. All other browsers can print the images without issue. I have some images elsewhere on the site that are also served via. PHP but these don't require a login. These print fine. The PHP-powered HTML pages on the site that require a login also print fine in IE. It's just login-required images. The user hitting print preview does not seem to result in additional HTTP request to the server for the file. However I do see an additional HTTP request a few seconds later that comes from the same IP (may or may not be related), This request includes no host header, no REQUEST_URI and no user agent. The 'please login' page sends an appropriate 403 header. I've also added a far-in-future expires header to the image response itself to ensure that browsers can serve/print the files from their own cache but this hasn't made any difference. Why can't IE print the images and what else can I do to investigate or fix the problem?

    Read the article

  • Installing MoinMoin -wiki to my user directory on a server with no root access

    - by deiga
    Hello all, I've been trying to install MoinMoin -wiki on this webserver, where I have no root access. The server doesn't support wsgi, but it does support cgi/fcgi/etc. I've scoured google for a simple guide on how to accomplish this, but the only guides I found were from the year 2004 or so. Other guides always assumed that one has root access. So can anyone link a good tutorial for my question or just help me out here? Your help is appreciated :) P.S. Sorry if this is the wrong stack -page

    Read the article

  • Cisco PIX 515 doesn't seem to be passing traffic through according to static route

    - by Liquidkristal
    Ok, so I am having a spot of bother with a Cisco PIX515, I have posted the current running config below, now I am no cisco expert by any means although I can do basic stuff with them, now I am having trouble with traffic sent from the outside to address: 10.75.32.25 it just doesn't appear to be going anywhere. Now this firewall is deep inside a private network, with an upstream firewall that we don't manage. I have spoken to the people that look after that firewall and they say they they have traffic routing to 10.75.32.21 and 10.75.32.25 and thats it (although there is a website that runs from the server 172.16.102.5 which (if my understanding is correct) gets traffic via 10.75.32.23. Any ideas would be greatly appreciated as to me it should all just work, but its not (obviously if the config is all correct then there could be a problem with the web server that we are trying to access on 10.75.32.25, although the users say that they can get to it internally (172.16.102.8) which is even more confusing) PIX Version 6.3(3) interface ethernet0 auto interface ethernet1 auto interface ethernet2 auto nameif ethernet0 outside security0 nameif ethernet1 inside security100 nameif ethernet2 academic security50 fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names name 195.157.180.168 outsideNET name 195.157.180.170 globalNAT name 195.157.180.174 gateway name 195.157.180.173 Mail-Global name 172.30.31.240 Mail-Local name 10.75.32.20 outsideIF name 82.219.210.17 frogman1 name 212.69.230.79 frogman2 name 78.105.118.9 frogman3 name 172.16.0.0 acadNET name 172.16.100.254 acadIF access-list acl_outside permit icmp any any echo-reply access-list acl_outside permit icmp any any unreachable access-list acl_outside permit icmp any any time-exceeded access-list acl_outside permit tcp any host 10.75.32.22 eq smtp access-list acl_outside permit tcp any host 10.75.32.22 eq 8383 access-list acl_outside permit tcp any host 10.75.32.22 eq 8385 access-list acl_outside permit tcp any host 10.75.32.22 eq 8484 access-list acl_outside permit tcp any host 10.75.32.22 eq 8485 access-list acl_outside permit ip any host 10.75.32.30 access-list acl_outside permit tcp any host 10.75.32.25 eq https access-list acl_outside permit tcp any host 10.75.32.25 eq www access-list acl_outside permit tcp any host 10.75.32.23 eq www access-list acl_outside permit tcp any host 10.75.32.23 eq https access-list acl_outside permit tcp host frogman1 host 10.75.32.23 eq ssh access-list acl_outside permit tcp host frogman2 host 10.75.32.23 eq ssh access-list acl_outside permit tcp host frogman3 host 10.75.32.23 eq ssh access-list acl_outside permit tcp any host 10.75.32.23 eq 2001 access-list acl_outside permit tcp host frogman1 host 10.75.32.24 eq 8441 access-list acl_outside permit tcp host frogman2 host 10.75.32.24 eq 8441 access-list acl_outside permit tcp host frogman3 host 10.75.32.24 eq 8441 access-list acl_outside permit tcp host frogman1 host 10.75.32.24 eq 8442 access-list acl_outside permit tcp host frogman2 host 10.75.32.24 eq 8442 access-list acl_outside permit tcp host frogman3 host 10.75.32.24 eq 8442 access-list acl_outside permit tcp host frogman1 host 10.75.32.24 eq 8443 access-list acl_outside permit tcp host frogman2 host 10.75.32.24 eq 8443 access-list acl_outside permit tcp host frogman3 host 10.75.32.24 eq 8443 access-list acl_outside permit tcp any host 10.75.32.23 eq smtp access-list acl_outside permit tcp any host 10.75.32.23 eq ssh access-list acl_outside permit tcp any host 10.75.32.24 eq ssh access-list acl_acad permit icmp any any echo-reply access-list acl_acad permit icmp any any unreachable access-list acl_acad permit icmp any any time-exceeded access-list acl_acad permit tcp any 10.0.0.0 255.0.0.0 eq www access-list acl_acad deny tcp any any eq www access-list acl_acad permit tcp any 10.0.0.0 255.0.0.0 eq https access-list acl_acad permit tcp any 10.0.0.0 255.0.0.0 eq 8080 access-list acl_acad permit tcp host 172.16.102.5 host 10.64.1.115 eq smtp pager lines 24 logging console debugging mtu outside 1500 mtu inside 1500 mtu academic 1500 ip address outside outsideIF 255.255.252.0 no ip address inside ip address academic acadIF 255.255.0.0 ip audit info action alarm ip audit attack action alarm pdm history enable arp timeout 14400 global (outside) 1 10.75.32.21 nat (academic) 1 acadNET 255.255.0.0 0 0 static (academic,outside) 10.75.32.22 Mail-Local netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.30 172.30.30.36 netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.23 172.16.102.5 netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.24 172.16.102.6 netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.25 172.16.102.8 netmask 255.255.255.255 0 0 access-group acl_outside in interface outside access-group acl_acad in interface academic route outside 0.0.0.0 0.0.0.0 10.75.32.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server RADIUS protocol radius aaa-server LOCAL protocol local snmp-server host outside 172.31.10.153 snmp-server host outside 172.31.10.154 snmp-server host outside 172.31.10.155 no snmp-server location no snmp-server contact snmp-server community CPQ_HHS no snmp-server enable traps floodguard enable telnet 172.30.31.0 255.255.255.0 academic telnet timeout 5 ssh timeout 5 console timeout 0 terminal width 120 Cryptochecksum:hi2u : end PIX515#

    Read the article

  • 14.04 LTS, 32-bit, Software Updater error "Failed to download repository information: Check your internet connection"

    - by Lucas W
    There isn't much to say about this one: when I run Software Updater, I get the above error message. That can't be good. Interestingly, when I click on "Settings..." and then close the settings dialogue that pops up, all of a sudden Software Updater successfully finds updates and installs them. I thought I should bring this to the attention of the Ubuntu community. sudo apt-get update returns the following: W: Failed to fetch http://ppa.launchpad.net/deluge-team/ppa/ubuntu/dists/trusty/main/binary-i386/Packages 404 Not Found E: Some index files failed to download. They have been ignored, or old ones used instead. I have screen captures, but I don't have enough reputation points to post them.

    Read the article

  • Internet Explorer 8 developer tools debugging on Windows XP

    - by Suresh Behera
    Although , Microsoft officially not going support Windows XP  but still many healthcare companies preferred to use windows XP internally. They buy windows 7 laptop and convert to Windows XP.This sounds funny but it true. I was trying to use IE’s Developer tools(F12) to debug one of JavaScript issue found that “jscript.dll” has to be registered explicitly    to your machine. even if i have IE8 and javsascript enabled on browser it was not stopping on breakpoint. Solution : register...(read more)

    Read the article

  • Get access to files on old HD installation and remove system files

    - by Blake
    I have been fooling with ubuntu for only a year or so. Added SSD installed ubuntu(12.04 64bit) connected old drive with ubuntu on it. everything seems to work well, except for access to some files. I would like to do two things: 1) move the swap file from the SSD to the partition on the HD. 2) remove ubuntu system files and gain full access to my other files. I can still remove the SSD and run ubuntu from the HD, so if I am approaching this incorrectly please advise. Thanks in advance Blake

    Read the article

  • How to Access Boot Options 12.04 Live USB

    - by Ryan Kampmeier
    I'm attempting to install 12.04 on my computer but booting from my USB drive results in a blank screen. This has happened since 10.04 and has always been fixed by putting nomodeset in the boot command, but now I can't access the boot options with F6 for some reason. How can I access the boot options? I booted into the live image on a different computer and it worked fine. I'm sure it's because of my Nvidia graphics. When I boot into the live image it shows a small gray box in the lower left corner of the screen and that's it. I can't edit the boot options or do anything else. Thanks in advance.

    Read the article

  • Unable to access the server via SSH?

    - by Rishee
    when I am trying to access the server through ssh it says: ssh: connect to host xx.yyy.zzz.x port 22: Connection refused and on the server in auth.log it shows following log entry: Address xx.yyy.zzz.x maps to xx.yyy.zzz.x.static-pune-vsnl.net.in, but this does not map back to the address - POSSIBLE BREAK-IN ATTEMPT! I have created a user account for that user and it is also in enabled status. Requested info It is Ubuntu 11.10 It is configured as SSH Server using openssh-server I am trying to connect to this server using Putty from Windows 7 i.e. My Desktop I have also asked this in superuser as per the request of @zpletan and link to that question is given below. http://superuser.com/questions/408080/unable-to-access-the-server-via-ssh Thanks in advance.

    Read the article

  • How to install packages without internet connection

    - by user114874
    I'm just beginner to linux operating system I have following doubts 1.Now i am using ubuntu 10.10 version i dont have net connection in my home So how can i install packages manually for ex: if me and my friend have same version and same hardware config if he installed installed all packages in his laptop can i install all his packages by copy packages from his lap to mine ?? if there is a way then how to do it?? Thx guys in advance..... :)

    Read the article

  • SEO is Internet Marketing's Gold Rush

    Search Engine Optimization is a lot like the Gold Rush of 1848. Those willing to take on the risk and expense early on found enough gold to finance larger mining operations and were the big winners, while latecomers oftentimes were left behind.

    Read the article

  • Accessing and controlling to the modem by ethernet connection

    - by iwd35
    I have a PC and I connectted to my modem (via ethernet cable). I want to prepare interface (VS2010) and I want to connect it and do the following: Modem access the admin page (IP: 192.168.1.1 password: admin password: admin) Wireless band (2.4GHz or 5GHz) changing Network mode (N-only, B/G/N- Mixed) changing channel changing (channel 1, 2,3, etc.) The project will be a desktop application. I will use VB .NET; modem model:cisco linksys wag320. How I can do it?

    Read the article

  • Dual Boot: access Mac OS HD folders from Ubuntu

    - by dresde
    I did it!!! I'm right now writting from Ubuntu 11.10 installed in my MacBook Pro using Dual Boot!!! THe only thing is, how can I now access my Mac folders? From Ubuntu if I try to open Music, Documents or any of those folders related to the Mac user I get the following: [The folder contents could not be displayed. You do not have the permissions necessary to view the contents of "Music"] I can access them if I run Nautilus from root (gksudo nautilus), but I would like to just be able to browse those folders. Thanks!

    Read the article

  • Is there an easy way to configure an Ubuntu system to function as a proxy/file server from behind an NAT?

    - by amol.kamath
    Sorry for the long question, but the situation/desire is quite complex. Here is my setup: I have a laptop which I carry around everywhere and I have a desktop sitting at home, connected to the internet through a router using NAT. My objective is to create a connection from my laptop to my desktop that can allow me to (in order of priority): Use the desktop as a proxy server Access files on the desktop remotely Control said desktop from the laptop using VNC or similar. Now here is the scene. I have already looked up and tried several ways to achieve the above goals. Teamviewer - I used it and didn't like it. This is not an option. SSH - This seems ideal, I have figured a way to use this for both proxy and file sharing. However, I am currently unable to connect it due to the NAT. I have a separate thread trying to get that to work here. VPN - I've figured out how to use this method for proxy, but not file sharing. However this faces the same problem as the above: I can't get it to connect through the NAT. Does anyone have any other solutions for what I want? Otherwise, if there are solutions to connecting through the NAT, please tell me (in the other thread). Thanks

    Read the article

< Previous Page | 102 103 104 105 106 107 108 109 110 111 112 113  | Next Page >