Search Results

Search found 19746 results on 790 pages for 'local dependency'.

Page 106/790 | < Previous Page | 102 103 104 105 106 107 108 109 110 111 112 113  | Next Page >

  • How to change the $PATH in Mac OSX

    - by Samuel Elgozi
    I've installed git via the instaler and not with terminal with commands, and my $PATH changed, the path to the 'local' git was added the the end of the variable, and my $PATH changed to this: /usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/local/git/bin However, that doesnt help me, because i the path to Xcode's git comes first. so what I've done is the next, I added this lines to my '.bash_profile': export PATH="/usr/local/git/bin:$PATH" and now my path is the next: /usr/local/git/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/local/git/bin And I wanted to know how to remove the duplication from the end of the Path so I end up with: /usr/local/git/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin Thanks Ahead! And sorry if my english is too bad..

    Read the article

  • Unmet Dependencies with kdelibs5-data

    - by Jitesh
    I was trying to install Amarok 1.4 on Ubuntu 12.04 (Gnome-classic), by following this instructions. Problem started after giving these two commands dpkg -i kdelibs5-data_4.6.2-0ubuntu4_all.deb dpkg -i kdelibs-data_3.5.10.dfsg.1-5ubuntu2_all.deb Now, immediately after these commands, Ubuntu Updater popped up and gave me an error that the package catalog is broken and needs to be repaired. Nothing can be installed or removed till then. It also offered a suggestion to run apt-get install -f. I tried that, but again got the same error.Also tried apt-get clean followed by apt-get install -f. Again got the following output: jitesh@jitesh-desktop:~$ sudo apt-get clean jitesh@jitesh-desktop:~$ sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: kdelibs5-data The following packages will be upgraded: kdelibs5-data 1 upgraded, 0 newly installed, 0 to remove and 18 not upgraded. 2 not fully installed or removed. Need to get 2,832 kB of archives. After this operation, 2,998 kB disk space will be freed. Do you want to continue [Y/n]? y Get:1 http: //in.archive.ubuntu.com/ubuntu/precise-updates/main kdelibs5-data all 4:4.8.4a-0ubuntu0.2 [2,832 kB] Fetched 2,832 kB in 32s (86.6 kB/s) dpkg: dependency problems prevent configuration of kdelibs5-data: libplasma3 (4:4.8.4a-0ubuntu0.2) breaks kdelibs5-data (<< 4:4.6.80~) and is installed. Version of kdelibs5-data to be configured is 4:4.6.2-0ubuntu4. kate-data (4:4.8.4-0ubuntu0.1) breaks kdelibs5-data (<< 4:4.6.90) and is installed. Version of kdelibs5-data to be configured is 4:4.6.2-0ubuntu4. katepart (4:4.8.4-0ubuntu0.1) breaks kdelibs5-data (<< 4:4.6.90) and is installed. Version of kdelibs5-data to be configured is 4:4.6.2-0ubuntu4. dpkg: error processing kdelibs5-data (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of kdelibs-data: kdelibs-data depends on kdelibs5-data; however: Package kdelibs5-data is not configured yet. No apport report written because MaxReports is reached already dpkg: error processing kdelibs-data (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already Errors were encountered while processing: kdelibs5-data kdelibs-data W: Duplicate sources.list entry http://archive.canonical.com/ubuntu/ precise/partner i386 Packages (/var/lib/apt/lists/archive.canonical.com_ubuntu_dists_precise_partner_binary-i386_Packages) W: You may want to run apt-get update to correct these problems E: Sub-process /usr/bin/dpkg returned an error code (1) As I thought the error was related to configuring kdelibs, I tried to configure using dpkg. But got the following errors: jitesh@jitesh-desktop:~$ sudo dpkg --configure -a dpkg: dependency problems prevent configuration of kdelibs5-data: libplasma3 (4:4.8.4a-0ubuntu0.2) breaks kdelibs5-data (<< 4:4.6.80~) and is installed. Version of kdelibs5-data to be configured is 4:4.6.2-0ubuntu4. kate-data (4:4.8.4-0ubuntu0.1) breaks kdelibs5-data (<< 4:4.6.90) and is installed. Version of kdelibs5-data to be configured is 4:4.6.2-0ubuntu4. katepart (4:4.8.4-0ubuntu0.1) breaks kdelibs5-data (<< 4:4.6.90) and is installed. Version of kdelibs5-data to be configured is 4:4.6.2-0ubuntu4. dpkg: error processing kdelibs5-data (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of kdelibs-data: kdelibs-data depends on kdelibs5-data; however: Package kdelibs5-data is not configured yet. dpkg: error processing kdelibs-data (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: kdelibs5-data kdelibs-data jitesh@jitesh-desktop:~$ Now I dont have any idea how to proceed. I am unable to install anything from Software Centre or using Terminal now. Some basic info: Core2Duo, dual booting Ubuntu 12.04 with Win7. Fresh install of Ubuntu 12.04 (not upgrade). Incidentally, I had first upgraded from 10.04 and had succesfully installed Amarok 1.4 following this same method. But due to other issues, i had to format and do a clean install of 12.04. Now when I tried to install Amarok 1.4, I'm getting these errors. I also have digiKam and k3b installed, if that can be of any help. I use digiKam a lot, so removing KDE is not feasible for me. Any help on this issue will be highly appreciated. Thanks in advance.

    Read the article

  • rvm doesnt work when specifiying the path...?

    - by jtzero
    when typing in the path to the rvm it doesnt work $which rvm /usr/local/bin/rvm $ruby -v ruby 1.9.2p0 (2010-08-18 revision 29036) [i686-linux] $/usr/local/bin/rvm use 1.8.7 Using /usr/local/rvm/gems/ruby-1.8.7-p302 $ruby -v ruby 1.9.2p0 (2010-08-18 revision 29036) [i686-linux] #now w/o the path $rvm use 1.8.7 Using /usr/local/rvm/gems/ruby-1.8.7-p302 $ruby -v ruby 1.8.7 (2010-08-16 patchlevel 302) [i686-linux] $whereis rvm rvm: /usr/local/bin/rvm /usr/local/lib/rvm /usr/local/rvm .... /etc/bash.bashrc .... if [[ -n "$PS1" ]]; then ... [[ -s "/usr/local/rvm/scripts/rvm" ]] && . "/usr/local/rvm/scripts/rvm" anyone seen this?

    Read the article

  • Local user vs. domain user? What is the right way here?

    - by ebeeb
    I'm a software developer in a company with 6 employees. Everyone has a machine for him-/herself, so none of the machines is shared. I'm currently setting up my machine with Windows 8 and was experimenting a bit with domain and local user accounts. Correct me please if I'm wrong, but I think the idea behind is, that domain users generally should not be able to modify the configuration of a machine (like installing software), since they are able to login on every single machine in the domain. The local user (usually just one local administrator per machine) is the one who cares about the configuration of the machine. But in my case the login into the domain is just for being able to access directories/servers in the domain (I do not really know the details, all I know is, that loggin into the domain user account is necessary). So overall I've got a local admin account and a domain account used on my machine. While working I'm logged in to my domain user account. But it annoys me, that I always need to enter the credentials of my local user account when I'm about to update/install something, which happens quite often as a software developer. I fixed this with adding the domain account into the user accounts in my control panel and putting it into the Administrators group. The only thing I wanted to know about this: is there something REALLY bad about doing this? Or is there maybe a more common way to be able to act like a local admin, while logged in as a domain user? PS: I'm sorry about the tags, but I don't know the proper ones. I'd be glad if some of the superuser experts could fix this :-)

    Read the article

  • Can I set up samba so it automatically allows all the local usernames and passwords?

    - by dialer
    I have set up samba like this (this is the complete smb.conf): [global] log file = /var/log/samba/log log level = 2 security = user [homes] browsable = false read only = no valid users = %S I'd like to enable every user on server to access their home directories, but for some unknown reason only my 'administrator' account can do so. (I have done that with ftp before, but now smb is also needed). When I try to smbclient -L localhost -U [user], I get NT_STATUS_LOGON_FAILURE, except with the administrator (which is the user created during the ubuntu installation, not root). The samba log file says NT_STATUS_NO_SUCH_USER: [2012/04/04 20:26:02.081454, 2] smbd/reply.c:554(reply_special) netbios connect: name1=LOCALHOST 0x20 name2=DIALER-X 0x0 [2012/04/04 20:26:02.081733, 2] smbd/reply.c:565(reply_special) netbios connect: local=localhost remote=dialer-x, name type = 0 [2012/04/04 20:26:02.087200, 2] auth/auth.c:314(check_ntlm_password) check_ntlm_password: Authentication for user [public] - [public] FAILED with error NT_STATUS_NO_SUCH_USER I suspect that I have to manually create samba users, but the man pages state that If the client has passed a username/password pair and that username/password pair is validated by the UNIX system's password programs, the connection is made as that username. To me that sounds like as long as the provided username/password is a valid login on the server, it should work. Am I missing something totally obvious? I don't want / can't afford to manually update the samba users and passwords to match the server's. 11.10

    Read the article

  • Jetty 7 hightide distribution, JSP and JSTL support

    - by Lior Cohen
    Hello guys. I've been struggling with Jetty 7 and its support for JSP and JSTL. My JSP file: <%@ page language="java" contentType="text/html; charset=utf-8" pageEncoding="utf-8" %> <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <html> <%@taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %> <head> <title>blah</title> </head> <body> <table id="data"> <tr class="columns"> <td>Hour</td> <c:forEach var="campaign" items="${campaigns}"> <td>${campaign}</td> </c:forEach> </tr> <c:forEach var="hour" items="${results}"> <tr> <td class="hour">${hour.key}</td> <c:forEach var="campaign" items="${campaigns}"> <td>${hour[campaign]}</td> </c:forEach> </tr> </c:forEach> </table> </body> </html> The JSP portions above work as expected. JSTL, however, does not. The campaigns and results variables are request attributes set by a servlet. I get the following errors: WARN: ... compiler.TagLibraryInfoImpl: Unknown element (deferred-value) in attribute WARN: ... compiler.TagLibraryInfoImpl: Unknown element (deferred-value) in attribute WARN: ... compiler.TagLibraryInfoImpl: Unknown element (deferred-value) in attribute ERROR: ... javax.servlet.ServletException: java.lang.AbstractMethodError: javax.servlet.jsp.PageContext.getELContext()Ljavax/el/ELContext; I am not bundling any jar files into my .war file deployed to jetty. The version of jetty I'm using is: jetty-hightide-7.0.1.v20091125 The classpath: /usr/local/jetty/lib/jetty-xml-7.0.1.v20091125.jar:/usr/local/jetty/lib/servlet-api-2.5.jar:/usr/local/jetty/lib/jetty-http-7.0.1.v20091125.jar:/usr/local/jetty/lib/jetty-continuation-7.0.1.v20091125.jar:/usr/local/jetty/lib/jetty-server-7.0.1.v20091125.jar:/usr/local/jetty/lib/jetty-security-7.0.1.v20091125.jar:/usr/local/jetty/lib/jetty-servlet-7.0.1.v20091125.jar:/usr/local/jetty/lib/jetty-webapp-7.0.1.v20091125.jar:/usr/local/jetty/lib/jetty-deploy-7.0.1.v20091125.jar:/usr/local/jetty/lib/jetty-servlets-7.0.1.v20091125.jar:/usr/local/jetty/lib/jsp/ant-1.6.5.jar:/usr/local/jetty/lib/jsp/core-3.1.1.jar:/usr/local/jetty/lib/jsp/jetty-jsp-2.1-7.0.1.v20091125.jar:/usr/local/jetty/lib/jsp/jsp-2.1-glassfish-9.1.1.B60.25.p2.jar:/usr/local/jetty/lib/jsp/jsp-api-2.1-glassfish-9.1.1.B60.25.p2.jar:/usr/local/jetty/resources:/usr/local/jetty/lib/jetty-util-7.0.1.v20091125.jar:/usr/local/jetty/lib/jetty-io-7.0.1.v20091125.jar Any help would be greatly appreciated. Thanks in advance, Lior.

    Read the article

  • Centos yum install git-sv

    - by bob
    Running yum install on Centos yum install git-svn is producing the following errors: Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * addons: mirror.eshk.hk * base: centos.01link.hk * epel: mirror.bjtu.edu.cn * extras: mirror.eshk.hk * rpmforge: apt.sw.be * updates: mirror.vpshosting.com.hk Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package git-svn.i386 0:1.7.3.4-1.el5.rf set to be updated --> Processing Dependency: perl(SVN::Core) for package: git-svn --> Processing Dependency: perl(Error) for package: git-svn --> Processing Dependency: perl(Term::ReadKey) for package: git-svn --> Running transaction check ---> Package perl-Error.noarch 1:0.17010-1.el5 set to be updated ---> Package perl-TermReadKey.i386 0:2.30-4.el5 set to be updated ---> Package subversion-perl.i386 0:1.4.2-4.el5_3.1 set to be updated --> Processing Dependency: subversion = 1.4.2-4.el5_3.1 for package: subversion-perl --> Finished Dependency Resolution subversion-perl-1.4.2-4.el5_3.1.i386 from base has depsolving problems --> Missing Dependency: subversion = 1.4.2-4.el5_3.1 is needed by package subversion-perl-1.4.2-4.el5_3.1.i386 (base) Error: Missing Dependency: subversion = 1.4.2-4.el5_3.1 is needed by package subversion-perl-1.4.2-4.el5_3.1.i386 (base) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest The program package-cleanup is found in the yum-utils package.

    Read the article

  • Cannot install Visual Editor Plugin on Eclipse

    - by lyuba
    I try to follow the instructions from here to install a Visual editor pulgin for Eclipse: http://wiki.eclipse.org/VE/Update Both online and offline installations fails with the following mistake: Cannot complete request. Generating details. Here is the complete log: Cannot complete the install because of a conflicting dependency. Software being installed: Java EMF Model 1.4.0.v20090826-1446-7H-FPbAcggQleH8hJifHfUd (org.eclipse.jem.feature.group 1.4.0.v20090826-1446-7H-FPbAcggQleH8hJifHfUd) Software currently installed: Eclipse IDE for Java EE Developers 1.2.2.20100217-2310 (epp.package.jee 1.2.2.20100217-2310) Only one of the following can be installed at once: Java EMF Model BeanInfo (Introspection) Support 2.0.300.v200905030615 (org.eclipse.jem.beaninfo 2.0.300.v200905030615) Java EMF Model BeanInfo (Introspection) Support 2.0.300.R3_1_maintenance (org.eclipse.jem.beaninfo 2.0.300.R3_1_maintenance) Cannot satisfy dependency: From: Eclipse IDE for Java EE Developers 1.2.2.20100217-2310 (epp.package.jee 1.2.2.20100217-2310) To: org.eclipse.epp.package.jee.feature.feature.group [1.2.2.20100217-2310] Cannot satisfy dependency: From: Java EE IDE Feature 1.2.2.20100217-2310 (org.eclipse.epp.package.jee.feature.feature.group 1.2.2.20100217-2310) To: org.eclipse.jst.web_ui.feature.feature.group 0.0.0 Cannot satisfy dependency: From: Java EMF Model 1.4.0.v20090826-1446-7H-FPbAcggQleH8hJifHfUd (org.eclipse.jem.feature.group 1.4.0.v20090826-1446-7H-FPbAcggQleH8hJifHfUd) To: org.eclipse.jem.beaninfo [2.0.300.R3_1_maintenance] Cannot satisfy dependency: From: JST Web Core 3.1.1.v200908121609-7S7CFyvFIhIehVidwyfk0m (org.eclipse.jst.web_core.feature.feature.group 3.1.1.v200908121609-7S7CFyvFIhIehVidwyfk0m) To: org.eclipse.jem.beaninfo [2.0.300.v200905030615] Cannot satisfy dependency: From: JST Web Core 3.1.1.v200908121609-7S7CG-dFIhIeq7kV6qxaLD (org.eclipse.jst.web_core.feature.feature.group 3.1.1.v200908121609-7S7CG-dFIhIeq7kV6qxaLD) To: org.eclipse.jem.beaninfo [2.0.300.v200905030615] Cannot satisfy dependency: From: JST Web UI 3.1.1.v200908121609-7E77FBfDlwYa_9sdy2q77doi14gl (org.eclipse.jst.web_ui.feature.feature.group 3.1.1.v200908121609-7E77FBfDlwYa_9sdy2q77doi14gl) To: org.eclipse.jst.web_core.feature.feature.group [3.1.1.v200908121609-7S7CFyvFIhIehVidwyfk0m] Cannot satisfy dependency: From: JST Web UI 3.1.1.v200908121609-7E77FBiDlwYcICNdz-5z-9PGqZCy (org.eclipse.jst.web_ui.feature.feature.group 3.1.1.v200908121609-7E77FBiDlwYcICNdz-5z-9PGqZCy) To: org.eclipse.jst.web_core.feature.feature.group [3.1.1.v200908121609-7S7CG-dFIhIeq7kV6qxaLD] Has anybody encountered something like this? Appreciate your ideas!

    Read the article

  • Can I use MSBUILD to investigate which dependency causes a source unit to be recompiled?

    - by Seb Rose
    I have a legacy C++ application with a deep graph of #includes. Changes to any header file often cause recompiles of seemingly unrelated source files. The application is built using a Visual Studio 2005 solution (sln) file. Can MSBUILD be invoked in a way that it reports which dependency(ies) are causing a source file to be recompiled? Is there any other tool that might be able to help?

    Read the article

  • How do make dependency generation work for C? (Also..decode this sed/make statement!)

    - by Derek
    Hi all. I have a make build system that I am trying to decipher that someone else wrote. I am getting an error when I run it on a redhat system, but not when I run it on my solaris system. The versions of gmake are the same major revision (one off on minor revision). This is for building a C project, and the make system has a global Makefile.global that is inherited by each directory's local Makefile The Makefile.global has all the targets in it, starting with all: $(LIB) $(BIN) where LIB builds libs and BIN builds binaries. jumping down the targets I have $(LIB) : $(GEN_LIB) $(GEN_LIB) : $(GEN_DEPS) $(GEN_OBJS) $(AR) $(ARFLAGS) $(GEN_LIB) $(GEN_OBJS) $(GEN_DEPS) : @set -e; rm -f $@; \ $(CC) $(CDEP_FLAG) $(CFLAGS) $(INCDIRS) `basename $@ | sed 's/\.d/\.c/' | sed 's,^,$(HOME_SRC)/,'` | sed 's,\(.*\)\.o: ,$(GEN_OBJDIR)/\1.o $@ :,g' > [email protected] ; \ cat [email protected] > $@ ; \ cat [email protected] | cut -d: -f2 | grep '\.h' | sed 's,\.h,.h :,g' >> $@ ; \ rm [email protected] $(GEN_OBJS) : $(CC) $(CFLAGS) $(INCDIRS) -c $(*F).c -lmpi -o $@ I think these are all the relevant targets I need to include to answer my question. Definitions of those variables: CC = icc CDEP_FLAG = -M CFLAGS = various compiler flags ifdef type flags INCDIRS = include directory where all .h files are GEN_OBJDIR = /lib/objs HOME_SRC = . GEN_LIB = lib/$(LIB) GEN_DEPDIR=/lib/deps GEN_DEPS = $(addprefix $(GEN_DEPDIR)/,$(addsuffix .d,$(basename $(OBJS)))) I think this has everything covered you need. Basically self explanatory from the names. Now as best I can tell, this is generating in /lib/deps a .d file that has the object and source dependencies in it. In other words, for the utilities.a library, I will get a utils.o and utils.c dependency stack, all in the file utils.d There is some syntax error that is being generated in that file I think, because I get the following error: ../lib/deps/util.d:25: *** target pattern contains no '%'. Stop. gmake[2]: *** [all] Error 2 gmake[1]: *** [all] Error 2 gmake: *** [all] Error 2 I am not sure if my error is in the dependency generation, or some further down part, like the object generation target? If you need further info, let me know, I will add to post

    Read the article

  • Where can I hire local programmers with very specific skillsets?

    - by Lostsoul
    I have been browsing the site and haven't found a exact fit to this question so I'll post it but if its already answered(since I'm sure its a common problem, then let me know). I have a business and want to create a totally different product in a different industry than I'm currently in, so I learned how to program and created a working prototype. I have a bit of savings and am getting some cash flow from my current business so I can go out and hire a developer(in the future hopefully it can be permenant but right now I just need a person willing to work on contract and code on weekends or their spare time and I just want to pay in cash instead of equity or future promises). At first I wasn't sure what kind of developer to hire but this question helped me understand I should target specific skills I need as opposed to general programmers. This poses a problem for me since general programmers are everywhere but if I want specific skills I'm unsure how to get them. I thought about a list of approaches but it doesn't feel complete or effective since it seems to be assuming good developers are actively looking. If it helps I want someone local(since this is my first developer hire) and looking for skills like cuda, hadoop, hbase, java and c. Any suggestions? As a FYI, I have been thinking of approaching it as: Go to meet ups for one or more skills I need. Use LinkedIn to find people with the skills I need Search for job postings that contain skills I need and then use linkedIn to reach out to that firms employees since many profiles on linkedin are not very updated or detailed but job postings generally are. Send postings to universities and maybe find a student who loves technology so much they learned these tools on their own. Post on job board. Not sure how successful it will be to post to monster. Use Craigslist, not sure if a highly skilled developer would go here for work. What am I missing? I could be wrong but it seems like good/smart/able developers aren't hunting for work non-stop(especially in this tech job market). Plus most successful people I know have work/life balance so I'm not sure if the best ones really care about code after work. Lastly, most of the skills I need aren't used in big corporations so not sure how aggressively smart developers at small shops look for work. I don’t really know any developers personally, so but should I be using the above plan or if they live balanced lives should I be looking outside of the regular resources(and instead focus on asking around my gym or my accountant or something)? Sorry, I'm making huge assumptions here, I guess because developers are a total mystery to me. I kind of wish Jane Goodall wrote a book on understanding developers social behaviour better :-p

    Read the article

  • How to deal with MySQL Connector/ODBC error "Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock'"

    - by user12653020
    I am sure many users run into a mysterious problem when perfectly working ODBC configurations started failing with errors like: Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' The above error message might be preceded with something like [nxDc[yQ]. At the same time odbc.ini specifies in its DSN different SOCKET=/tmp/mysql.sock or a TCP connection SERVER=<remote_host_or_ip>. The question is, what had happened that the ODBC driver started to ignore the DSN options? The clue lies in the corrupted string [nxDc[yQ], which actually was [UnixODBC][MySQL] with each 2nd symbol removed. This is the case of bad conversion from SQLCHAR to SQLWCHAR. The UnixODBC driver manager took a single-byte character string from the client application and tried to convert it into the wide (multi-byte) characters for the Unicode version of MyODBC driver: Initially the piece of the connection string was represented by 1-byte chars like: [S][E][R][V][E][R][=][m][y][h][o][s][t][;] after the bad conversion to wide chars (commonly 2-byte UTF-16) [SE][RV][ER][=m][yh][os][t;] instead of [S\0][E\0][R\0][V\0][E\0][R\0][=\0][m\0][y\0][h\0][o\0][s\0][t\0][;\0] Naturally, the MyODBC driver could not parse the bad string and tried to use the default connection type (SOCKET) with the default value (/var/lib/mysql/mysql.sock) Now we know what happened, but why it happened? In most cases it happened because of using ODBCManageDataSourcesQ4 utility or its older analog ODBCConfig. When registering ODBC drivers they put lots of additional options and one of these options badly affects the UnixODBC driver manager itself. The solution is simple - remove or comment out the option in odbcinst.ini file (it is empty by default) set for the driver: [MySQL ODBC 5.2.6 Driver] Description    = Driver         = /home/dbs/myodbc526/lib/libmyodbc5w.so Driver64       = /home/dbs/myodbc526/lib/libmyodbc5w.so Setup          = /home/dbs/myodbc526/lib/libmyodbc5S.so Setup64        = /home/dbs/myodbc526/lib/libmyodbc5S.so UsageCount     = 1 CPTimeout      = 0 CPTimeToLive   = 0 IconvEncoding  =  # <--------- remove this line Trace          = TraceFile      = TraceLibrary   = After applying this simple solution (remove the line with IconvEncoding = ) everything came to normal. Prior to removing that line I tried putting different encoding names there, but the result was not good, so I really don't know how to properly use it. Unfortunately, UnixODBC manuals say nothing about it. Therefore, removing this option was the only way to get things done.

    Read the article

  • Getting PATH right for python after MacPorts install

    - by BenjaminGolder
    I can't import some python libraries (PIL, psycopg2) that I just installed with MacPorts. I looked through these forums, and tried to adjust my PATH variable in $HOME/.bash_profile in order to fix this but it did not work. I added the location of PIL and psycopg2 to PATH. I know that Terminal is a version of python in /usr/local/bin, rather than the one installed by MacPorts at /opt/local/bin. Do I need to use the MacPorts version of Python in order to ensure that PIL and psycopg2 are on sys.path when I use python in Terminal? Should I switch to the MacPorts version of Python, or will that cause more problems? In case it is helpful, here are more facts: PIl and psycopg2 are installed in /opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages which pythonreturns/usr/bin/python echo $PATHreturns (I separated each path for easy reading): :/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/ :/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages :/opt/local/bin :/opt/local/sbin :/usr/local/git/bin :/usr/bin :/bin :/usr/sbin :/sbin :/usr/local/bin :/usr/local/git/bin :/usr/X11/bin :/opt/local/bin in python, sys.path returns: /Library/Frameworks/SQLite3.framework/Versions/3/Python /Library/Python/2.6/site-packages/numpy-override /Library/Frameworks/GDAL.framework/Versions/1.7/Python/site-packages /Library/Frameworks/cairo.framework/Versions/1/Python /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python26.zip /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6 /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/plat-darwin /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/plat-mac /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/plat-mac/lib-scriptpackages /System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/lib-tk /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/lib-old /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/lib-dynload /Library/Python/2.6/site-packages /System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python/PyObjC /System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python/wx-2.8-mac-unicode I welcome any criticism and comments, if any of the above looks foolish or poorly conceived. I'm new to all of this. Thanks! Running OSX 10.6.5 on a MacBook Pro, invoking python 2.6.1 from Terminal

    Read the article

  • How to remotely open gedit with SFTP URL in Gnome through SSH?

    - by Álvaro Justen
    My setup is weird and I can't change it now. I have two machines: local-machine: it's my desktop running Ubuntu with Gnome remote-machine: it's one virtual machine, also running Ubuntu but without X In both machines I have my private and public SSH keys. I need to run SSH from remote-machine to local-machine and run gedit (in local-machine, under the default $DISPLAY) but openning a file in remote-machine throught SFTP. Something like this: myuser@remote-machine:~$ ssh local-machine "DISPLAY=:0.0 gedit sftp://remote-machine/some/file" The command above doesn't work. gedit shows this message: Could not open the file sftp://remote-machine/some/file. gedit cannot handle sftp: locations. Note that: /some/file exists on remote-machine. I can SSH normally from remote-machine to local-machine using my SSH key without any problems! I can run the command DISPLAY=:0.0 gedit sftp://remote-machine/some/file in a terminal on local-machine and gedit opens the file on remote-machine without any problems - but the terminal in which I executed the command is running in DISPLAY :0 (really, it's gnome-terminal). I also tried -t option of SSH client (to force pseudo-tty allocation) but it didn't work. If I try to run DISPLAY=:0.0 gedit sftp://remote-machine/some/file in local-machine but under a tty (for example in tty1, by pressing <Ctrl>+<Alt>+<F1>) it doesn't not work - I get the same error when running from remote-machine. I found that if I pass the environment variable DBUS_SESSION_BUS_ADDRESS with a correct value, it works! So, if I do something like that: myuser@local-machine:~$ env | grep DBUS_SESSION_BUS_ADDRESS > env.txt myuser@local-machine:~$ scp env.txt remote-machine: and then: myuser@remote-machine:~$ ssh local-machine "DISPLAY=:0.0 $(cat env.txt) gedit sftp://remote-machine/some/file" it works! The problem is that I'm not on local-machine so I can't get the correct value for this env variable. Is there any other way to make this work?

    Read the article

  • Cannot connect to local network shares when connected to VPN. Error: "the user name could not be found"

    - by Nick G
    I keep finding that on our small company LAN (7 users, 3 servers) that some servers keep becoming "not accessible" for the purposes of file sharing. They display the message "\SERVER is not accessible. You might not have permission to use this network resource. The user name could not be found". But I don't know why "the user name could not be found" as all the machines are on the same domain and the PDC and BDC seem to be behaving OK. EDIT: VPN seems to be the cause: It turns out I can see the server if I use the IP address (\\1.2.3.4\ etc) or the FQ active directory name (eg \server.domainname.local) but not if I use the server name on its own or a mapped network drive originally created from the "short" name. Oddly though, my machine has no issue resolving the server's DNS name as I can ping the machine name OK and it immediately comes back with the IP, however nslookup seems to fail. It seems to be a problem with how Windows looks up machine names when connected to VPNs. When I'm connected to a VPN, windows seems to use the DNS assocated with the VPN and not the one on the domain controller. This behavior to me, seems incorrect as surely that would mean connecting to any VPN would break any ability to lookup local machine names for servers and printers etc. So I guess the real question now is, how can I make my machine still search the local Active Directory DNS (the PDC) even when connected to a VPN? More info in my comments below.

    Read the article

  • Convert raw IMAP server data into local folders, then upload partial dataset to new IMAP server?

    - by Manca Weeks
    I am transitioning a company with about 30 IMAP accounts, loaded with data (about 77GB total), to a new email host. The majority of the data will be converted into a local archive and distributed to the company computers as a static reference data set. The server side folders the users absolutely cannot do without being on the server will be uploaded back to the new server. I used Mac OS X Mail (Snow Leopard 10.6.6) to download the content. I notice some messages have the name [xxx].partial.emlx, which leads me to believe they have not been downloaded all the way. I have root access to the mail server data and could download the IMAP server data via FTP. I am not sure what utility to use to convert that data to local Mail.app mailboxes. Furthermore, I would appreciate any input on the best way to upload a portion of the data to the new server (GoDaddy), preserving the original dates of the messages. edit OK - forget the raw server data. I found a script that apparently does pretty good archiving IMAP folders to local mbx files. My main quest now is to batch upload a mailbox hierarchy to the new IMAP server without having to start-stop and deal with similar issues. Anyone know of a utility (hopefully for OS X, but if not, I'll fire up my XP virtual system...) that would be capable of this? Thanks, M

    Read the article

  • need to stop mysql server on my mac os x

    - by al0ne evenings
    I just installed xampp on my mac os x. When I tried start mysql it display a message that mysql is already running on this computer. In order to start mysql stop first mysql. I tried following ways to stop it but neither of them works. mysqladmin version sudo /usr/local/mysql/mysql.server stop //mysql.server command not found mysqladmin -u root -p password shutdown //restarts the server but not shutdown when i use which mysql command it shows this path /usr/local/bin/mysql and when I issue ps aux | grep mysqld command I get following output zafarsaleem 85209 0.0 0.3 2699804 13204 ?? S 7:51AM 0:00.88 /Applications/MAMP/Library/bin/mysqld --basedir=/Applications/MAMP/Library --datadir=/Applications/MAMP/db/mysql --plugin-dir=/Applications/MAMP/Library/lib/plugin --lower-case-table-names=0 --log-error=/Applications/MAMP/logs/mysql_error_log.err --pid-file=/Applications/MAMP/tmp/mysql/mysql.pid --socket=/Applications/MAMP/tmp/mysql/mysql.sock --port=8889 zafarsaleem 85093 0.0 0.0 2435488 924 ?? S 7:51AM 0:00.03 /bin/sh /Applications/MAMP/Library/bin/mysqld_safe --port=8889 --socket=/Applications/MAMP/tmp/mysql/mysql.sock --lower_case_table_names=0 --pid-file=/Applications/MAMP/tmp/mysql/mysql.pid --log-error=/Applications/MAMP/logs/mysql_error_log zafarsaleem 86693 0.0 0.0 2425480 180 s004 R+ 8:30AM 0:00.00 grep mysqld zafarsaleem 86507 0.0 0.3 2678756 11364 ?? S 8:07AM 0:00.63 /usr/local/Cellar/mysql/5.5.20/bin/mysqld --basedir=/usr/local/Cellar/mysql/5.5.20 --datadir=/usr/local/var/mysql --plugin-dir=/usr/local/Cellar/mysql/5.5.20/lib/plugin --max-allowed-packet=32M --log-error=/usr/local/var/mysql/Zafars-MacBook-Pro-2.local.err --pid-file=/usr/local/var/mysql/Zafars-MacBook-Pro-2.local.pid zafarsaleem 86447 0.0 0.0 2435488 920 ?? S 8:07AM 0:00.02 /bin/sh /usr/local/bin/mysqld_safe --max_allowed_packet=32M Please help. How can I resolve this issue.

    Read the article

  • Active Directory Restricted Group confusion

    - by pepoluan
    I am trying to implement Restricted Group policy for my company's AD infrastructure, namely standardizing the local "Administrators" group. The documentation (and various webpages) said that the "Members of this group" policy will wipe out the "Administrators" group. However, an experiment made me confused: I created 2 GPOs: GPO-A replaces the Local Administrators with a list of domain users (e.g., "Alice" and "Bob") GPO-B inserts a domain user (e.g., "Charlie" -- not part of GPO A) into the Local Administrators Experiment 1: GPO-A gets applied first (link order 2) Everything happens as expected: GPO-A cleans out Local Admins and add "Alice" & "Bob" gets added; GPO-B adds "Charlie". Experiment 2: GPO-B is applied first What happens: "Charlie" gets added to the Local Admins group (which also contains 2 local users) The local users on the PC gets deleted, and "Alice" and "Bob" gets added. Result: Local Admins contain "Alice", "Bob", and "Charlie" My confusion: In Experiment 2, I thought GPO-A will totally erase the Local Admins group, including users added by GPO-B (since GPO-A gets applied after GPO-B). As it happens, it only erase local users from the Local Admins, but keeps the domain users. So, is that the way it should be? Or am I doing something incorrectly?

    Read the article

  • Why can a local root turn into any LDAP user?

    - by Daniel Gollás
    I know this has been asked here before, but I am not satisfied with the answers and don't know if it's ok to revive and hijack an older question. We have workstations that authenticate users on an LDAP server. However, the local root user can su into any LDAP user without needing a password. From my perspective this sounds like a huge security problem that I would hope could be avoided at the server level. I can imagine the following scenario where a user can impersonate another and don't know how to prevent it: UserA has limited permissions, but can log into a company workstation using their LDAP password. They can cat /etc/ldap.conf and figure out the LDAP server's address and can ifconfig to check out their own IP address. (This is just an example of how to get the LDAP address, I don't think that is usually a secret and obscurity is not hard to overcome) UserA takes out their own personal laptop, configures authentication and network interfaces to match the company workstation and plugs in the network cable from the workstation to their laptop, boots and logs in as local root (it's his laptop, so he has local root) As root, they su into any other user on LDAP that may or may not have more permissions (without needing a password!), but at the very least, they can impersonate that user without any problem. The other answers on here say that this is normal UNIX behavior, but it sounds really insecure. Can the impersonated user act as that user on an NFS mount for example? (the laptop even has the same IP address). I know they won't be able to act as root on a remote machine, but they can still be any other user they want! There must be a way to prevent this on the LDAP server level right? Or maybe at the NFS server level? Is there some part of the process that I'm missing that actually prevents this? Thanks!!

    Read the article

< Previous Page | 102 103 104 105 106 107 108 109 110 111 112 113  | Next Page >