Search Results

Search found 5226 results on 210 pages for 'pg hba conf'.

Page 106/210 | < Previous Page | 102 103 104 105 106 107 108 109 110 111 112 113  | Next Page >

• Configure audio on HP ENVY 4 ultrabook

  - by phodu_insaan

  I want to configure audio for ubuntu 12.04 on my laptop. Currently the audio just does not play. If i try and plug in headphones then somewhere midway to being fully plugged in the audio plays on the headphones, I plug in further and the sound disappears. How do I get this to work? lspci | grep audio Audio device: Intel Corporation Panther Point High Definition Audio Controller My laptop is one the beats edition HP laptops, and the driver for win7 was an IDT HD audio driver. --EDIT-- The output for cat /proc/asound/card0/codec* | grep Codec is Codec: IDT 92HD91BXX Codec: Intel PantherPoint HDMI I need to get both the IDT card to work and the HDMI card to work with my TV. --EDIT-- --EDIT 2-- I have added blacklist snd-usb-audio to the end of the file /etc/modprobe.d/alsa-base.conf Now the sound plays from my laptop speakers only when I plug in a headphones/external speaker. Otherwise no sound. :( Please help getting everything working as it should. --EDIT 2-- Thanks

  Read the article

• How can i make a Multiseat with Xephyr?

  - by Jnts

  i'm trying to make a multiseat with ubuntu, but a cant make this work. I've read a lot of "how to", and the most of then is about to do a multiseat with some distro with GDM2, or KDM. But, i'm using the lightdm of ubuntu. So now i'm trying to make this multiseat with Xephyr that i already used to make a multiseat with the Debian 4 version. But i dont know how to call Xephyr in lightdm.conf. Sorry for my totally crap english.

  Read the article

• /etc/network/interfaces doesn't always take affect

  - by user1221444

  For some reason my eth0 does not have internet on reboot sometimes. I am using a static ip. I can ping my gateway, but I am unable to ping dns servers, or anything out of my network. It seems that when my internet does work(Usually but just restarting enough times), my /etc/resolv.conf has a nameserver in it. It is empty when I have no internet access. I believe something is overwriting my interfaces settings sometimes on boot. Any help would be appreciated. I am running Ubuntu Server 12.04 64bit /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 173.213.192.234 netmask 255.255.255.248 network 173.213.192.232 broadcast 173.213.192.239 gateway 173.213.192.233 dns-nameservers 8.8.8.8 auto eth1 iface eth1 inet static address 10.0.0.106 netmask 255.255.255.0 gateway 10.0.0.1

  Read the article

• Migrating Virtual Iron guest to Oracle VM 3.x

  - by scoter

  As stated on the official site, Oracle in 2009, acquired a provider of server virtualization management software named Virtual Iron; you can find all the acquisition details at this link. Into the FAQ on the official site you can also view that, for the future, Oracle plans to fully integrate Virtual Iron technology into Oracle VM products, and any enhancements will be delivered as a part of the combined solution; this is what is going on with Oracle VM 3.x. So, customers started asking us to migrate Virtual Iron guests to Oracle VM. IMPORTANT: This procedure needs a dedicated OVM-Server with no-guests running on top; be careful while execute this procedure on production environments. In these little steps you will find how-to migrate, as fast as possible, your guests between VI ( Virtual Iron ) and Oracle VM; keep in mind that OracleVM has a built-in P2V utility ( Official Documentation )  that you can use to migrate guests between VI and Oracle VM. Concepts: VI repositories.  On VI we have the same "repository" concept as in Oracle VM; the difference between these two products is that VI use a raw-lun as repository ( instead of using ocfs2 and its capabilities, like ref-links ). The VI "raw-lun" repository, with a pure operating-system perspective, may be presented as in this picture: Infact on this "raw-lun" VI create an LVM2 volume-group. The VI "raw-lun" repository, with an hypervisor perspective, may be presented as in this picture: So, the relationships are: LVM2-Volume-Group <-> VI Repository LVM2-Logical-Volume <-> VI guest virtual-disk The first step is to present the VI repository ( raw-lun ) to your dedicated OVM-Server. Prepare dedicated OVM-Server On the OVM-Server ( OVS ) you need to discover new lun and, after that, discover volume-group and logical-volumes containted in VI repository; due to default OVS configuration you need to edit lvm2 configuration file: /etc/lvm/lvm.conf     # By default for OVS we restrict every block device:     # filter = [ "r/.*/" ] and comment the line starting with "filter" as above. Now you have to discover the raw-lun presented and, next, activate volume-group and logical-volumes: #!/bin/bash for HOST in `ls /sys/class/scsi_host`;do echo '- - -' > /sys/class/scsi_host/$HOST/scan; done CPATH=`pwd` cd /dev for DEVICE in `ls sd[a-z] sd?[a-z]`;do echo '1' > /sys/block/$DEVICE/device/rescan; done cd $CPATH cd /dev/mapper for PARTITION in `ls *[a-z] *?[a-z]`;do partprobe /dev/mapper/$PARTITION; done cd $CPATH vgchange -a yAfter that you will see a new device:[root@ovs01 ~]# cd /dev/6000F4B00000000000210135bef64994[root@ovs01 6000F4B00000000000210135bef64994]# ls -l 6000F4B0000000000061013* lrwxrwxrwx 1 root root 77 Oct 29 10:50 6000F4B00000000000610135c3a0b8cb -> /dev/mapper/6000F4B00000000000210135bef64994-6000F4B00000000000610135c3a0b8cb By your OVM-Manager create a guest server with the same definition as on VI:same core number as VI source guestsame memory as VI source guestsame number of disks as VI source guest ( you can create OVS virtual disk with a small size of 1GB because the "clone" will, eventually, extend the size of your new virtual disks )Summarizing:source-virtual-disk path ( VI ):/dev/mapper/6000F4B00000000000210135bef64994-6000F4B00000000000610135c3a0b8cbdest-virtual-disk path ( OVS ):/OVS/Repositories/0004fb00000300006cfeb81c12f12f00/VirtualDisks/0004fb000012000055e0fc4c5c8a35ee.img ** ** = to identify your virtual disk you have verify its name under the "vm.cfg" file of your new guest.Clone VI virtual-disk to OVS virtual-diskdd if=/dev/mapper/6000F4B00000000000210135bef64994-6000F4B00000000000610135c3a0b8cb of=/OVS/Repositories/0004fb00000300006cfeb81c12f12f00/VirtualDisks/0004fb000012000055e0fc4c5c8a35ee.img Clean unsupported parameters and changes on OVS.1. Restore original /etc/lvm/lvm.conf    # By default for OVS we restrict every block device:     filter = [ "r/.*/" ]    and uncomment the line starting with "filter" as above.2. Force-stop lvm2-monitor service  # service lvm2-monitor force-stop 3. Restore original /etc/lvm directories ( archive, backup and cache )  # cd /etc/lvm  # rm -fr archive backup cache; mkdir archive backup cache4. Reboot OVSRefresh OVS repository and start your guest.By OracleVM Manager refresh your repository:By OracleVM Manager start your "migrated" guest: Comments and corrections are welcome.  Simon COTER 

  Read the article

• How do I rotate my monitor using xorg?

  - by user1106405

  I have just installed KUbuntu 12.10, and I am attempting to rotate my monitor 90 deg to the left. When I add the option to rotate, the monitor seems to ignore the directive. I'm currently using dual 02:00.0 VGA compatible controller: NVIDIA Corporation GF104 [GeForce GTX 460] (rev a1) 03:00.0 VGA compatible controller: NVIDIA Corporation GF104 [GeForce GTX 460] (rev a1) and NVidia driver version 310 My xorg.conf is as follows: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 304.51 (buildd@komainu) Fri Oct 12 12:53:49 UTC 2012 # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 310.14 ([email protected]) Tue Oct 9 13:04:01 PDT 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 1280 0 Screen 1 "Screen1" RightOf "Screen0" Screen 2 "Screen2" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Samsung SyncMaster" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 60.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "DELL 1908WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 EndSection Section "Monitor" Identifier "Monitor2" VendorName "Unknown" ModelName "DELL 1907FP" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 76.0 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 460" BusID "PCI:2:0:0" Screen 0 EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 460" BusID "PCI:2:0:0" Screen 1 EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 460" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: 1920x1200 +0+0; DFP-0: 1920x1200_60 +0+0; DFP-0: 1600x1200 +0+0; DFP-0: 1600x1200_60 +0+0; DFP-0: 1280x1024 +0+0; DFP-0: 1280x1024_60 +0+0; DFP-0: 1280x960 +0+0; DFP-0: 1280x960_60 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 1024x768_60 +0+0; DFP-0: 800x600 +0+0; DFP-0: 800x600_60 +0+0; DFP-0: 800x600_56 +0+0; DFP-0: 640x480 +0+0; DFP-0: 640x480_60 +0+0; DFP-0: nvidia-auto-select @1920x1080 +0+0; DFP-0: nvidia-auto-select @1920x720 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: 1920x1200 +0+0; DFP-0: 1920x1200_60 +0+0; DFP-0: 1600x1200 +0+0; DFP-0: 1600x1200_60 +0+0; DFP-0: 1280x1024 +0+0; DFP-0: 1280x1024_60 +0+0; DFP-0: 1280x960 +0+0; DFP-0: 1280x960_60 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 1024x768_60 +0+0; DFP-0: 800x600 +0+0; DFP-0: 800x600_60 +0+0; DFP-0: 800x600_56 +0+0; DFP-0: 640x480 +0+0; DFP-0: 640x480_60 +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DFP-2: nvidia-auto-select +0+0" Option "Rotate" "left" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Enable" EndSection Edit: If I delete the xorg.conf and reboot, I am able to rotate my monitor, however, my third monitor is not recognized: Screen 0: minimum 8 x 8, current 3360 x 1200, maximum 16384 x 16384 DVI-I-0 disconnected (normal left inverted right x axis y axis) DVI-I-1 disconnected (normal left inverted right x axis y axis) DVI-I-2 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 518mm x 324mm 1920x1200 60.0*+ 1600x1200 60.0 1280x1024 60.0 1280x960 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 HDMI-0 disconnected (normal left inverted right x axis y axis) DVI-I-3 connected 1440x900+1920+0 (normal left inverted right x axis y axis) 408mm x 255mm 1440x900 59.9*+ 75.0 1280x1024 75.0 60.0 1280x800 59.8 1152x864 75.0 1024x768 75.0 70.1 60.0 800x600 75.0 72.2 60.3 56.2 640x480 75.0 72.8 59.9

  Read the article

• How to disable automatic login?

  - by iammilind

  I was playing around with "User accounts" and somehow set automatic login. Now, when I start my PC, it just has one button named as "login". Clicking that button, directly logs me in to my PC. There is no music or no asking for password while logging in. As a side effect, it asks me separately for keyring password How to disable auto login and make login/keyring password unified again like before? NOTE: Attempting to disable Automatic Login from System Settings User Accounts does not work. This is the content of my /etc/lightdm/lightdm.conf (where I have commented the autologin for my username mgandhi): [SeatDefaults] greeter-session=unity-greeter user-session=ubuntu #autologin-user=mgandhi

  Read the article

• How can I run samba?

  - by depesz

  I have server running Ubuntu 10.10. Never used samba before, as I never had windows machines, but now I need it. So I did: apt-get install samba smbfs smbclient. Packages are installed, but I have no idea how to configure it. All howtos I found on the net relate to /etc/samba/something.conf, where I don't even have /etc/samba directory. The only config I found is /etc/default/samba, which contains (aside from comments) only: RUN_MODE="daemons" All I want is to be able to have access to some directories on the Ubuntu machine from Windows, nothing else.

  Read the article

• dnsmasq not running

  - by Yevgeniy M.

  i installed ubuntu 12.04 on a netbook with 16GB SSD. To keep the installation small i used the mini.iso i got from here. Everything worked fine, but i noticed that dnsmasq does not get started by NetworkManager. On a different machine i installed 12.04 from a regular iso and netstat shows dnsmasq running and listening on port 53. NetworkManager.conf look identically on both systems. The line dns=dnsmasq is present. Although i do not really need dnsmasq - name resolution works fine without - i would like to know the reason why dnsmasq is running on one system, but does not run on the other and how i could adjust this behavior. Thx in advance!

  Read the article

• Getting front audio jacks to work

  - by Ashfame

  I run Ubuntu 10.10 on my Intel D945. My front audio ports don't work in Ubuntu, the rear one does. I never got it working earlier when I had Ubuntu 10.04 but this time I am going to try it again. My codec is SigmaTel STAC9227 My ALSA information is here. Handy details: !!ALSA Version !!------------ Driver version: 1.0.23 Library version: 1.0.23 Utilities version: 1.0.23 !!Loaded ALSA modules !!------------------- snd_hda_intel snd_hda_intel I know something that I will have to change the model of my module to make the front audio jack works but I couldn't find a model related line in my ALSA configuration file - /etc/modprobe.d/alsa-base.conf (I was able to get to that point in Ubuntu 10.04, may be something has changed). How can I proceed from here?

  Read the article

• How to adjust DPI in 14.04

  - by jake

  I asked about fixing DPI in 12.04. The 14.04 release notes list "Support for High-DPI screens and desktop scaling." Post upgrade, it seems that nothing has changed. Similar symptoms from my previous post persist: The 1" square here is closer to 1/2" Despite the line xserver-command=X -dpi 170 in /etc/lightdm/lightdm.conf, xdpyinfo reports 96x96 dpi I did find that I was able to use the "Scale for menu and title bars" slider in System SettingsDisplays to fix title bar text size instead of setting org.gnome.desktop.interface text-scaling-factor as described here. The last post also mentions that in Gnome 3, DPI is hard coded to 96. Is this a limitation in 14.04? (I am somewhat ignorant to the distinction between Gnome and Unity) Can I do anything to properly set my DPI?

  Read the article

• Why is Lubuntu default desktop environment

  - by John

  So I just wanted to try things out on 14.04, so I did sudo apt-get install lxde sudo apt-get install lubuntu-desktop When I get to the greeter, it reads Lubuntu (Default) Lubuntu Netbook LXDE Openbox Ubuntu Why is Lubuntu default? I don't know if its because its the last thing I installed or if its because it is in alphabetical order. I'm tempted to test this theory by installing Xubuntu and see if it becomes default. I'd like it to read Ubuntu (Default) and have the Ubuntu splash instead. When I open lightdm.conf, there is no line "user-session" nor "greeter-session". They are missing. Is this normal and I have to add it manually?

  Read the article

• How do I set up XDMCP access via GDM?

  - by np_hard

  I am a newbie to ubuntu linux, and want to setup xdmcp access, so i can access it from my windows box using xming. part of it is learning exercise also, since i know i could use vnc to directly connect to ubuntu. I modified the gdm's custom.conf file like this [xdmcp] Enable=true but when i launch xlaunch, i see a blank screen, further diagnosing with wireshark, i got that the udp port 177 on the linux box is unreachable so i disabled the firewall on linux box, but still same result. I checked with nmap and there is no service listening on UDP 177 port, the gdnsetup on natty is quite different from the older version, where setting up xdmcp was in UI

  Read the article

• [News] Coup de pouce ? la communaut? .NET belge

  Petit coup de pouce ? un nouveau venu dans la communaut? .NET, le site DotNetHub. Un site .NET qui cible principalement la Belgique francophone, le Luxembourg, la France et la Suisse. Pour Steve Degosserie co-cr?ateur du site : "DotNetHub est un endroit o? vous pourrez trouver toute une s?rie d?informations via des news, blogging, articles, des supports de conf?rences ou encore des podcasts". Longue vie ? DotNetHub !

  Read the article

• Problem installing skype on ubuntu 12.10 : Error in sound packages

  - by damned

  I tried to install Skype on my ubuntu 12.10 via command line $ sudo apt-get install skype I received this error : The following packages have unmet dependencies: libasound2-plugins:i386 : Depends: libasound2:i386 (>= 1.0.25) but it is not going to be installed skype-bin:i386 : Depends: libasound2:i386 (>= 1.0.23) but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). When I tried the suggestion, $ sudo apt-get -f install I get the following error : Unpacking libasound2:i386 (from .../libasound2_1.0.25-3ubuntu3_i386.deb) ... dpkg: error processing /var/cache/apt/archives/libasound2_1.0.25-3ubuntu3_i386.deb (--unpack): trying to overwrite shared '/usr/share/alsa/alsa.conf', which is different from other instances of package libasound2:i386 No apport report written because MaxReports is reached already dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/libasound2_1.0.25-3ubuntu3_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) Configuration of my ubuntu is as follows : $ uname -a Linux sumitb-pc 3.5.0-21-generic #32-Ubuntu SMP Tue Dec 11 18:51:59 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux Please help me out here ! :)

  Read the article

• Having tried differen ways but none worked - How do I disable a service from auto-start at boot in Ubuntu?

  - by Howard Guo

  This really doesn't make sense. I've been using many other distros and never had such difficulty managing autostart services. I found three ways of disabling autostart services, and none of them works for me: update-rc.d -f service_name remove chkconfig --level 12345 service_name off sysv-rc-conf I tried all the three ways to disable mysql daemon, mongo daemon, redis server, cups daemon, yet all of the utilities confirmed that the daemons are disabled, yet they still automatically start on boot. Please suggest the most correct way to disable services from auto-start at boot. Thank you! btw, it's running 12.04

  Read the article

• dhcpd fails to start

  - by TECHPREACHER

  I recently installed Ubuntu 11.10 I then used apt-get to grab isc-dhcp3. I removed Network-Manager and manually configured my network interface eth0. In addition, I hand edited a dhcpd.conf file and designated eth0 as the listen port in /etc/default/isc-dhcp-server. However, each time I attempt to start dhcpd it fails. When I view the syslog file, the last line is as follows: "Not configured to listen on any interfaces!" My eth0 interface works fine. I can ping addresses inside and outside the network and perform DNS queries. Any help would be greatly appreciated. AJ

  Read the article

• Sharing samba-folder with root access

  - by Industrial

  Hi everyone, I have a staging server in my network running Ubuntu server 10.10, being my main development area. As I need to access the files in the Apache root from other computers in the network, I have setup samba with the following settings: [www] comment = Apache root www path = /var/www writable = yes force user = root force group = root On the host computer, running Ubuntu 10.10 desktop, I am trying to mount the drive with a bash file looking like below: #!/bin/bash sudo mount -t cifs //192.168.1.5/www /media/www/ -o username=myusername,password=mypassword,rw,iocharset=utf8,file_mode=0777,dir_mode=0777 What happens is that I get mount error(13): Permission denied Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) thrown in my face whilst trying to execute the mount. I've done exactly the same, with exactly the same smb.conf & mount-bash file on another computer in my network, but this just wont work. What am I doing wrong? I am running out of ideas.

  Read the article

• Need to adjust touchpad edge scroll area

  - by MikeVB

  I have an Acer Aspire that I have dual booting XP and Ubuntu. On the Windows side, the driver allows you to set how close your finger has to be to the edge of the touchpad before it goes into scroll mode. In Ubuntu I don't have the option (at least in the GUI) to change the scroll area on the pad. Is there a conf file or other way to change this? I'm constantly getting into the scroll area during normal usage. I would like to leave it on without losing so much pad area to the scroll feature. Thanks a lot.

  Read the article

• How do I get Catalyst 11.10 with ATI Radeon Mobility HD 5470 working on an HP DV7?

  - by S Kumar

  I have a HP DV7 with a HD 5470 512M card. Installation of the Catalyst 11.10 is repeatedly failing on a fresh install of Ubuntu 11.10. Catalyst 11.8 proprietary drivers were working well with Ubuntu 11.04. I have tried installing directly from the .run and generating the distribution specific packages. Nothing has worked. After installation which goes through successfully, the system hangs on reboot after the flashing dots. I have to replace the /etc/X11/xorg.conf to get the X working. I have followed instructions as per the http://wiki.cchtml.com/index.php/Main_Page wiki. Request for support to ATI/AMD gives the response that this model is unsupported on Linux by HP :). Updated 14-Nov I have reverted back to the open source drivers which work well enough for me.

  Read the article

• Mac updated just now, postgres now broken

  - by user52224

  I run postgres 9.1 / ruby 1.9.2 / rails 3.1.0 on a maxbook air for local dev. It's all been running smoothly for months, (though this is the first time I've done development on a mac.) It's a macbook air from last year, and today I got the mac osx software update message as I have a few times before, and my system downloaded approx 450mb of updates and restarted. It now says it's on OSX 10.7.3. Point is, postgres has stopped working, when I start my thin server (mirror heroku cedar) as normal, and then browse to my rails app I get: PG::Error could not connect to server: Permission denied Is the server running locally and accepting connections on Unix domain socket "/var/pgsql_socket/.s.PGSQL.5432"? What happened? After browsing around a few questions I'm still confused, but here's some extra info: Running psql from command line gives same error I can run pgadmin 3 and connect via it and run SQL no problems Running which psql shows the version as /usr/bin/psql I created a PostgreSQL user back when I got the mac (it's always been on lion) I've no idea why, almost certainly I was following a tutorial which I neglected to store in my notes. Point is I am aware there is a _postgres user as well. I know it's rubbish, but apart from a note on passwords, I don't have any extra info on how I configured postgres - though the obvious implication is that I did not use the _postgres user. Anyone have suggestions or information on what might have changed / what I can try to debug and fix? Thanks. Edit: Playing around based on this question and answer: http://stackoverflow.com/questions/7975414/check-status-of-postgresql-server-mac-os-x, see this string of commands: $ sudo su postgreSQL bash-3.2$ /Library/PostgreSQL/9.1/bin/pg_ctl start -D /Library/PostgreSQL/9.1/data pg_ctl: another server might be running; trying to start server anyway server starting bash-3.2$ 2012-04-08 19:03:39 GMT FATAL: lock file "postmaster.pid" already exists 2012-04-08 19:03:39 GMT HINT: Is another postmaster (PID 68) running in data directory "/Library/PostgreSQL/9.1/data"? bash-3.2$ exit

  Read the article

• Programmaticaly change lightdm autologin session type

  - by marcinpz

  I have problem with lightdm setting autologin session type (using my config tool). Lightdm logs into previously selected session. I see that autologin-session is UNIMPLEMENTED in version 1.2.1. Maybe I can somehow cheat lightdm? but it seems program writes actual state when stopping and overwrites my changes to /home/user/.dmrc and /var/cache/lightdm/user.dmrc. At the current I have two sessions: default and kiosk. in /etc/lightdm/lightdm.conf I have line: user-session=desktop but after I logged into kiosk session it starts all the time. Changing .dmrc and /var/cache/lightdm/dmrc/user.dmrc doesn't work.

  Read the article

• Numlock doesn't work after logging in

  - by Tobi

  I've a strange problem after upgrading to Ubuntu 11.10 The Numlock of my Apple Keyboard (white, wired) doesn't work anymore. Strange thing because it works with the guest account but not with my user account. I did change the lightdm.conf to get the numlock working for the login and it works, but nor in my user account. Even stranger, pushing zero effects a right click? I also tried different keyboard layouts, but it shows Numlock on (stuck on) but doesn't work. Any idea which config file stores information about this?

  Read the article

• What's the recommend way to enable disable services?

  - by NES

  I read about how to enable and disable services in Ubuntu and it seems that there are different possibilities manage theme? The first method i found is update-rc.d to add new services to startup, which aims on the /etc/init.d folder and it's contents. The other one i found is the way to edit .conf the files in /etc/init folder. What's the recommended way to enable / disable / add services and why? Could you please give a short bulletproof step by step example how to add a service xyz in Ubuntu and enable and disable it?

  Read the article

• Zoneminder user control reset

  - by benjimeistro

  i have ubuntu 12.04 and i think i was an idiot and set all the restrictions to view" in the "users" tab on ZoneManager not "edit" as it should be. Now i cant do anything in the options, ive tried to find the conf file to edit to no avail. Uninstalled Zoneminder, apache and SQLite and reinstalled, but it just reverts all the settings back to the "view" setting. Ive googled all day tried to edit the sql files with sql browser, and it tells me its not a valid sql file.. many thanks in advance for any help. Ben

  Read the article

• How to install Edubuntu on a system with low memory (256 Mb)?

  - by int_ua

  I'm preparing an old system with 256 Mb RAM to send it to some children. It doesn't have Ethernet controller and there are no Internet access at the destination. I've chosen Edubuntu for obvious reasons and modified it with UCK trying to minimize memory usage just to install, let alone using it yet. But Ubiquity won't start even in openbox (edited /etc/lightdm/lightdm.conf) because there are no space left on /cow right after booting. I've already deleted things like ibus, zeitgeist, update-manager (no network access after all), twisted-core, plymouth logos. I'm thinking about creating a swap partition on HDD, can it be later added to expand this /cow ? Is there a package for the text-mode installation which is used on Alternate CDs? I don't want to re-create Edubuntu from an Alternate CD. This behavior is reproducible in VM limited to 256Mb RAM.

  Read the article

< Previous Page | 102 103 104 105 106 107 108 109 110 111 112 113  | Next Page >