Search Results

Search found 26223 results on 1049 pages for 'visual c 2008 express'.

Page 106/1049 | < Previous Page | 102 103 104 105 106 107 108 109 110 111 112 113  | Next Page >

• Sync clock on Windows XP machine to external (non-domain, non-workgroup) Windows Server 2008 R2 machine

  - by Eric

  I have two machines and I'd like their clocks to be in sync for various reasons. Machine 1 is an XP machine located in the office. Machine 2 is a VPS hosted by a third party running Windows Server 2008 R2. These machines are not in any kind of workgroup or on a domain together. They are completely separate machines. Machine 2 is currently syncing once a week to time.windows.com. The clock on Machine 2 does seem to wander a bit within that week interval. What I would like to do is have Machine 1 set its clock based on the clock of Machine 2. I have tried configuring w32tm on the XP machine. This is what I used for configuration: w32tm /config /syncfromflags:manual /manualpeerlist:"<ip address of machine 2>" However, whenever I issue the /resync command I get "The computer did not resync because no time data was available". I have made sure to start the windows time service on machine 2, and I have added firewall exceptions for UDP port 123. Is there something I need to configure on Machine 2 (other than just starting the time service) in order to get it to respond? Edit: I have also run w32tm /config /reliable:YES /update on Machine 2. I am still getting "The computer did not resync because no time data was available". Is there something else I'm missing?

  Read the article

• How to detach a sql server 2008 database that is not in database list?

  - by Amir

  I installed SQL Server 2008 on Windows 7. Then I created a database. After 2 days I reinstalled Windows and SQL Server. Now I am trying to attach my database file, but I have encountered the error below. I think that the files are like an attached file and I can't attach them. What is difference between an attached file and a non-attached file? How can I attach this file? Please Help Me. Error Text: TITLE: Microsoft SQL Server Management Studio Attach database failed for Server 'AMIR-PC'. (Microsoft.SqlServer.Smo) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.50.1600.1+((KJ_RTM).100402-1540+)&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach+database+Server&LinkId=20476 ------------------------------ ADDITIONAL INFORMATION: An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo) Unable to open the physical file "F:\Company.mdf". Operating system error 5: "5(Access is denied.)". (Microsoft SQL Server, Error: 5120) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.50.1600&EvtSrc=MSSQLServer&EvtID=5120&LinkId=20476

  Read the article

• how to link with static mySQL C library with Visual Studio 2008?

  - by Jean-Denis Muys

  Hi, My project is running fine, but its requirement for some DLLs means it cannot be simply dragged and dropped by the end user. The DLLs are not loaded when put side by side with my executable, because my executable is not an application, and its location is not in the few locations where Windows looks for DLL. I already asked a question about how to make their loading happen. None of the suggestions worked (see the question at http://stackoverflow.com/questions/2637499/how-can-a-win32-app-plugin-load-its-dll-in-its-own-directory) So I am now exploring another way: get rid of the DLLs altogether, and link with static versions of them. This is failing for the last of those DLLs. So I am at this point where all but one of the libraries are statically linked, and everything is fine. The last library is the standard C library for mySQL, aka Connector/C. The problem I have may or may not be related with that origin. Whenever I switched to the static library in the linker additional dependency, I get the following errors (log at the end): 1- about 40 duplicate symbols (e.g. _toupper) mutually between LIBCMT.lib and MSVCRT.lib. Interestingly, I can't control the inclusion of these two libraries: they are from Visual Studio and automatically included. So why are these symbol duplicate when I include mySQL's static lib, but not its DLL? Searching C:\Program Files\Microsoft Visual Studio 9.0\VC\lib\MSVCRT.lib: Searching C:\Program Files\Microsoft Visual Studio 9.0\VC\lib\OLDNAMES.lib: Searching C:\Program Files\Microsoft Visual Studio 9.0\VC\lib\msvcprt.lib: Searching C:\Program Files\Microsoft Visual Studio 9.0\VC\lib\LIBCMT.lib: LIBCMT.lib(setlocal.obj) : error LNK2005: _setlocale already defined in MSVCRT.lib(MSVCR90.dll) Searching C:\Program Files\Microsoft Visual Studio 9.0\VC\lib\MSVCRT.lib: MSVCRT.lib(MSVCR90.dll) : error LNK2005: _toupper already defined in LIBCMT.lib(toupper.obj) 2- two warnings that MSVCRT and LIBCMT conflicts with use of other libs, with a suggestion to use /NODEFAULTLIB:library:. I don't understand that suggestion: what am I supposed to do and how? LINK : warning LNK4098: defaultlib 'MSVCRT' conflicts with use of other libs; use /NODEFAULTLIB:library LINK : warning LNK4098: defaultlib 'LIBCMT' conflicts with use of other libs; use /NODEFAULTLIB:library 3- an external symbol is undefined: _main. So does that mean that the static mySQL lib (but not the DLL) references a _main symbol? For the sake of it, I tried to define an empty function named _main() in my code, with no difference. LIBCMT.lib(crt0.obj) : error LNK2001: unresolved external symbol _main As mentioned in my first question, my code is a port of a fully working Mac version of the code. Its a plugin for a host application that I don't control. The port currently works, albeit with installation issues due to that lone remaining DLL. As a Mac programmer I am rather disoriented with Visual Studio and Windows which I find confusing, poorly designed and documented, with error messages that are very difficult to grasp and act upon. So I will be very grateful for any help. Here is the full set of errors: 1 Searching C:\Program Files\Microsoft Visual Studio 9.0\VC\lib\MSVCRT.lib: 1 Searching C:\Program Files\Microsoft Visual Studio 9.0\VC\lib\OLDNAMES.lib: 1 Searching C:\Program Files\Microsoft Visual Studio 9.0\VC\lib\msvcprt.lib: 1 Searching C:\Program Files\Microsoft Visual Studio 9.0\VC\lib\LIBCMT.lib: 1LIBCMT.lib(setlocal.obj) : error LNK2005: _setlocale already defined in MSVCRT.lib(MSVCR90.dll) 1LIBCMT.lib(tidtable.obj) : error LNK2005: __encode_pointer already defined in MSVCRT.lib(MSVCR90.dll) 1LIBCMT.lib(tidtable.obj) : error LNK2005: __encoded_null already defined in MSVCRT.lib(MSVCR90.dll) 1LIBCMT.lib(tidtable.obj) : error LNK2005: __decode_pointer already defined in MSVCRT.lib(MSVCR90.dll) 1LIBCMT.lib(tolower.obj) : error LNK2005: _tolower already defined in MSVCRT.lib(MSVCR90.dll) 1LIBCMT.lib(invarg.obj) : error LNK2005: __set_invalid_parameter_handler already defined in MSVCRT.lib(MSVCR90.dll) 1LIBCMT.lib(invarg.obj) : error LNK2005: __invalid_parameter_noinfo already defined in MSVCRT.lib(MSVCR90.dll) 1LIBCMT.lib(crt0dat.obj) : error LNK2005: __amsg_exit already defined in MSVCRT.lib(MSVCR90.dll) 1LIBCMT.lib(crt0dat.obj) : error LNK2005: __initterm_e already defined in MSVCRT.lib(MSVCR90.dll) 1LIBCMT.lib(crt0dat.obj) : error LNK2005: _exit already defined in MSVCRT.lib(MSVCR90.dll) 1LIBCMT.lib(crtheap.obj) : error LNK2005: __malloc_crt already defined in MSVCRT.lib(MSVCR90.dll) 1LIBCMT.lib(dosmap.obj) : error LNK2005: __errno already defined in MSVCRT.lib(MSVCR90.dll) 1LIBCMT.lib(file.obj) : error LNK2005: __iob_func already defined in MSVCRT.lib(MSVCR90.dll) 1LIBCMT.lib(mlock.obj) : error LNK2005: __unlock already defined in MSVCRT.lib(MSVCR90.dll) 1LIBCMT.lib(mlock.obj) : error LNK2005: _lock already defined in MSVCRT.lib(MSVCR90.dll) 1LIBCMT.lib(winxfltr.obj) : error LNK2005: __CppXcptFilter already defined in MSVCRT.lib(MSVCR90.dll) 1LIBCMT.lib(crt0init.obj) : error LNK2005: ___xi_a already defined in MSVCRT.lib(cinitexe.obj) 1LIBCMT.lib(crt0init.obj) : error LNK2005: ___xi_z already defined in MSVCRT.lib(cinitexe.obj) 1LIBCMT.lib(crt0init.obj) : error LNK2005: ___xc_a already defined in MSVCRT.lib(cinitexe.obj) 1LIBCMT.lib(crt0init.obj) : error LNK2005: ___xc_z already defined in MSVCRT.lib(cinitexe.obj) 1LIBCMT.lib(hooks.obj) : error LNK2005: "void __cdecl terminate(void)" (?terminate@@YAXXZ) already defined in MSVCRT.lib(MSVCR90.dll) 1LIBCMT.lib(winsig.obj) : error LNK2005: _signal already defined in MSVCRT.lib(MSVCR90.dll) 1LIBCMT.lib(fflush.obj) : error LNK2005: _fflush already defined in MSVCRT.lib(MSVCR90.dll) 1LIBCMT.lib(tzset.obj) : error LNK2005: __tzset already defined in MSVCRT.lib(MSVCR90.dll) 1LIBCMT.lib(_ctype.obj) : error LNK2005: _isspace already defined in MSVCRT.lib(MSVCR90.dll) 1LIBCMT.lib(_ctype.obj) : error LNK2005: _iscntrl already defined in MSVCRT.lib(MSVCR90.dll) 1LIBCMT.lib(getenv.obj) : error LNK2005: _getenv already defined in MSVCRT.lib(MSVCR90.dll) 1LIBCMT.lib(strnicmp.obj) : error LNK2005: __strnicmp already defined in MSVCRT.lib(MSVCR90.dll) 1LIBCMT.lib(osfinfo.obj) : error LNK2005: __get_osfhandle already defined in MSVCRT.lib(MSVCR90.dll) 1LIBCMT.lib(osfinfo.obj) : error LNK2005: __open_osfhandle already defined in MSVCRT.lib(MSVCR90.dll) [...] 1 Searching C:\Program Files\Microsoft Visual Studio 9.0\VC\lib\MSVCRT.lib: 1MSVCRT.lib(MSVCR90.dll) : error LNK2005: _toupper already defined in LIBCMT.lib(toupper.obj) 1MSVCRT.lib(MSVCR90.dll) : error LNK2005: _isalpha already defined in LIBCMT.lib(_ctype.obj) 1MSVCRT.lib(MSVCR90.dll) : error LNK2005: _wcschr already defined in LIBCMT.lib(wcschr.obj) 1MSVCRT.lib(MSVCR90.dll) : error LNK2005: _isdigit already defined in LIBCMT.lib(_ctype.obj) 1MSVCRT.lib(MSVCR90.dll) : error LNK2005: _islower already defined in LIBCMT.lib(ctype.obj) 1MSVCRT.lib(MSVCR90.dll) : error LNK2005: __doserrno already defined in LIBCMT.lib(dosmap.obj) 1MSVCRT.lib(MSVCR90.dll) : error LNK2005: _strftime already defined in LIBCMT.lib(strftime.obj) 1MSVCRT.lib(MSVCR90.dll) : error LNK2005: _isupper already defined in LIBCMT.lib(_ctype.obj) [...] 1Finished searching libraries 1 Creating library z:\PCdev\Test\RK_Demo_2004\plugins\Test.bundle\contents\windows\Test.lib and object z:\PCdev\Test\RK_Demo_2004\plugins\Test.bundle\contents\windows\Test.exp 1Searching libraries [...] 1Finished searching libraries 1LINK : warning LNK4098: defaultlib 'MSVCRT' conflicts with use of other libs; use /NODEFAULTLIB:library 1LINK : warning LNK4098: defaultlib 'LIBCMT' conflicts with use of other libs; use /NODEFAULTLIB:library 1LIBCMT.lib(crt0.obj) : error LNK2001: unresolved external symbol _main

  Read the article

• Windows Server 2008 backup VHD's - is it possible to mount/open in Windows 7?

  - by Simon

  Hi All, Is it possible to mount the VHD files created by the Windows Server 2008 backup utility onto a Windows 7 (release) client? Following an array failure I was very worried that there was a problem with both the backup sets on different USB drives as attaching the VHD to a Win 7 box did not show the expected structure (instead they behaved like unformatted disk space). Subsequently, I've attached the backup drive to a 2008r2 machine that I'd intended to be the replacement and the backup set can be browsed without issue (seemingly). When the new disks arrive I'll go through the recovery process and see where we are, but it looks promising so far. Is it simply the case that you can't take server created VHD's and mount them on desktop machines? (Rather than hyper-ventilating at the thought of years of lost photos and email, I'm now just mildly curious) Edit:One thing that has confused things is that the backup utility on Win7 is more restrictive about restoring from external devices than the equivilent on 2008r2. With r2, I can restore files 'from another server' and browse to external storage. Win7 only allows the back to be located on a network share. Once my box of new disks arrive and I've got something to restore onto, I'll move the smaller of the backup VHDs onto network storage reachable by Win7 and see if the VHD is readable. I haven't read up on the VHD process used by the backup app - I'm assuming it's a base VHD and differencing files used for incremental backups and that the restore app understands this. Finally: In retrospect the question should have been, 'can I restore a 2008r2 backup set via a Win 7 client' Thanks

  Read the article

• SQL Server 2008: Getting Login failed for user "Domain\User". Failed to open the explicitly specified database [CLIENT: IP.ADD.RR.ESS]

  - by GodEater

  This is a very similar issue to " SQL Server 2008 login problem with ASP.NET application: Failed to open the explicitly specified database " which unfortunately seems to have gone unsolved. My issue here is subtly different. Firstly the account failing login is not 'NT AUTHORITY\NETWORK SERVICE' - it's an actual domain account. Secondly, there are two machines involved - I gathered from the first question it was a single machine running both the IIS and SQL instances. The application which is trying to connect to the database is an ASP.NET one running on another server (if that makes any different, I'm not sure it does.) The ConnectionString being used in the web.config for the application is : data source=MySQLServer;initial catalog=MyDatabase;integrated security=sspi; And the Application Pool is set to NetworkService for Identity. So - in the web app, I get the following error : Cannot open database "MyDatabase" requested by the login. The login failed. Login failed for user 'MyDomain\WebServerMachineName$' In the SQL Server logs I see : Login failed for user 'MyDomain\WebServerMachineName$'. Reason: Failed to open the explicitly specified database. [CLIENT: Web.Server.IP.Address] Running this bit of SQL against the database in question : USE [MyDatabase] GO SELECT SDP.name AS [User Name], SDP.type_desc AS [User Type], UPPER(SDPS.name) AS [Database Role] FROM sys.database_principals SDP INNER JOIN sys.database_role_members SDRM ON SDP.principal_id=SDRM.member_principal_id INNER JOIN sys.database_principals SDPS ON SDRM.role_principal_id = SDPS.principal_id Gets me this result : MyDomain\WebServerMachineName$ WINDOWS_USER DB_DDLADMIN MyDomain\WebServerMachineName$ WINDOWS_USER DB_DATAREADER MyDomain\WebServerMachineName$ WINDOWS_USER DB_DATAWRITER Which appears to me to indicate I've got the permissions right. Anyone have any idea why it's not working, or how I can narrow the issue down some more?

  Read the article

• Release build in MVS 2010 professional v/s express for C

  - by yCalleecharan

  Hi, recently I discovered that "executing" a C program as a release build instead of a debug build optimizes the code and makes it run much faster. This is accessed through project properties configuration manager menu. I would like to know if this feature is the same in the professional version and the express edition of MVS 2010 in terms of speed optimization. I have the express edition. Also, I would like to know if C programs run with the same speed as in both the professional and express editions. I understand that the professional edition has many "software" tools for the serious programmer. Thanks a lot..

  Read the article

• CONTAINSTABLE with wildcard works different in SQL Server 2005 and SQL Server 2008?

  - by musuk

  I have two same databases one on SQL Server 2005 and one on SQL Server 2008, it have same SQL_Latin1_General_CP1_CI_AS Collation, and full text search catalogs have the same settings. These two databases contains table with same data, NTEXT string: "...kræve en forklaring fra miljøminister Connie Hedegaard.." My problem is: CONTAINSTABLE on SQL Server 2008 finds nothing if query is: select * from ContainsTable(SearchIndex_7, Content, '"miljø*"') ct but SQL Server 2005 works perfectly and finds necessary record. SQL Server 2008 finds necessary record if query is: select * from ContainsTable(SearchIndex_7, Content, '"milj*"') ct or select * from ContainsTable(SearchIndex_7, Content, '"miljøminister"') What can be reason for so strange behavior?

  Read the article

• CONTAINSTABLE with wildcard works different in SQLServer 2005 and SQLServer 2008?

  - by musuk

  I have two same databases one on SQLServer 2005 and one on SqlServer 2008, it have same SQL_Latin1_General_CP1_CI_AS Collation, and full text search catalogs have the same settings. These two databases contains table with same data, NTEXT string: "...kræve en forklaring fra miljøminister Connie Hedegaard.." My problem is: CONTAINSTABLE on SQLServer 2008 finds nothing if query is: select * from ContainsTable(SearchIndex_7, Content, '"miljø*"') ct but SQLServer 2005 works perfectly and finds necessary record. SQLServer 2008 finds necessary record if query is: select * from ContainsTable(SearchIndex_7, Content, '"milj*"') ct or select * from ContainsTable(SearchIndex_7, Content, '"miljøminister"') What can be reason for so strange behavior?

  Read the article

• Which events specifically cause Windows 2008 to mark a SAN volume offline?

  - by Jeremy

  I am searching for specific criteria/events that will cause Windows 2008 to mark a SAN volume as offline in disk management, even though it is connected to that SAN volume via FC or iSCSI. Microsoft states that "A dynamic disk may become Offline if it is corrupted or intermittently unavailable. A dynamic disk may also become Offline if you attempt to import a foreign (dynamic) disk and the import fails. An error icon appears on the Offline disk. Only dynamic disks display the Missing or Offline status." I am specifically wondering if, on the SAN, changing the path to the disk (such as the disk being presented to the host via a different iSCSI target IQN or a different LUN #) would cause a volume to be offlined in disk management. Thanks! Edit: I have already found two reasons why a disk might be set offline, disk signature collisions and the SAN disk policy. Bounty would be awarded to someone who can find further documented reasons related to changes in the volume's path. Disk signature collisions: http://blogs.technet.com/b/markrussinovich/archive/2011/11/08/3463572.aspx SAN disk policy: http://jeffwouters.nl/index.php/2011/06/disk-offline-with-error-the-disk-is-offline-because-of-a-policy-set-by-an-administrator/

  Read the article

• Cant kill process on Windows Server 2008!! - Thread in Wait:Executive State

  - by adrian

  I hope someone can help me with our issue we are having. We have a major issue with a process that we can not kill and the only way to get rid of the process is to reboot the machine. I have tried killing it from the normal task manager but no joy. I have tried killing it using the taskkill /F command from a command prompt and no joy. The command reports as sucessful but the process remains. I have tried to start task manager with system rights by calling "psexec -s -i -d taskmgr" and attempting to kill the process but no joy I have tried killing it from Process Explorer but again the process remains. I have tried creating a scheduled task that runs under the SYSTEM name to kill the task but that also does not kill it : schtasks /create /ru system /sc once /st 13:16 /tn test1 /tr "taskkill /F /PID 1576" /it Nothing I do will kill this process. Even logging off and logging back on will not kill this process. Using Process Explorer I notice that there is on stubborn thread that is in the Wait:Executive state. I have tried to kill this thread using Process Explorer but again no joy. We are using Windows Server 2008 R2 64-Bit. The server is brand new and windows is freshly installed. Now heres the thing. We have brought two identical servers from Dell with the same specs and the same OS installed and I can not replicate this issue on the other server. Only on this server, under certain circumstances does this server process hang and can not be restarted! I have also changed the compatability mode by setting it the process to "Windows 2003" but this has not helped. I have noticed in Process Explorer that DEP is turned on but im not sure this has got any bearing on the issue ot not. Please, can someone help??

  Read the article

• Windows Server 2008 can't start postgresql-x64-9.0 service: could not create any TCP/IP sockets

  - by Rob

  After rebooting a Windows Server 2008 machine to apply system updates, we recently we began having some issues running PostgreSQL 9.0. When we noticed the problem, we reverted the Windows updates, but the issue persists: From services.msc, attempting to start the postgresql-x64-9.0 service fails. Half-way through starting the progress bar becomes very slow, and eventually responds with error 1053; "the service did not respond in a timely fashion." Interestingly enough, bringing up the task manager shows multiple instances of postgres.exe have been started, and looking at the log file shows: 2011-02-10 14:44:02 ESTLOG: database system is ready to accept connections I then tried killing the processes, and starting via the command-line (as the user postgres), but I receive a different error: C:/Program Files/PostgreSQL/9.0/bin/pg_ctl.exe start -N "postgresql-x64-9.0" -D "F:/SHARE/postgres" -w waiting for server to start............................................................... pg_ctl: could not start server ESTWARNING: could not create listen socket for "192.168.0.101" ESTFATAL: could not create any TCP/IP sockets The log file again indicates that the database is ready to accept connections. Also, using netstat indicates that no other processes are using port 5432; I can't think of any other obvious reason that opening the listen socket might fail. Any help would be greatly appreciated.

  Read the article

• Poor performance on IIS7, only on Windows Server 2008, fine on Windows 7?

  - by user32005

  Hi, I'm new to IIS7 but have experience with other versions. I've been working on an application that works great in a dev environment (as always) but when I push it to a windows server 2008/IIS7 box performance takes a noticeable hit. The dev environment is Windows7/IIS7. The configuration in IIS is the same on the dev box as the server. I've tried all sorts of things to try and find a reason for this but I cant come to any conclusion. I've ruled out database problems on the live box as all data is cached after the first request. I've confirmed this to be true and made sure there is no additional database traffic. I've ruled out network issues with a combination of monitoring requests with fiddler and local debugging on the server. Whenever the code runs on the server there seems to be a performance issue. The server: Intel Core 2 Quad CPU Q6600 @ 2.40ghz with 2gb RAM. I know this is not fantastic but I was expecting it to at least perform as well as my dev environment (which is running much more on a lower spec). The CPU using peaks at under 60%, and memory usage is less than half of the available. I've enabled failed request tracing and most of the time is spent in a custom HttpModule, this module works to handle every request, I cant get any more detail as to what within the module may be causing the problem. Any ideas, I've been pulling my hair out for days now. Thanks

  Read the article

• A little guidance setting up FTP server authentication on Windows Server 2008 R2 standard?

  - by Ropstah

  I have a (clean) server running Windows Server 2008 R2 standard. I would just like to use it for serving a website and a FTP server through IIS. IIS is installed and serves my website propery. I have now added a FTP site but when I try to logon using my user/pass i get the following error: 530 User cannot login From this article (http://support.microsoft.com/kb/200475) I understand that these four causes can be pointed out: The Allow only anonymous connections security setting has been turned on in the Microsoft Management Console (MMC). Not the case The username does not have the Log on locally permission in User Manager. The user is in the Users group, however I'm not able to logon through RDP. I tried configuring this by following this article through GPMC however this only works when I'm logged in as a domain user on a domain controller which I'm not: I'm logged in as administrator The username does not have the Access this computer from the network permission in User Manager. Not sure what this implies...? The Domain Name was not specified together with the username (in the form of DOMAIN\username). Tried adding the server name: server\username, not working... I am an absolute server noob and I'd just like to be able to connect through FTP... Any guidance is highly appreciated!

  Read the article

• Visual Studio 2008\Backup Files folder created when every new VS instance is opened.

  - by Lukasz Podolak

  Hi, I think I have something broken with the path that VS 2008 saves the backup files. Since few days, it creates a new "Visual Studio 2008" directory in the same folder that my .sln file exists. Then, after the time of the first auto-save expires, the backup files are being saved to this folder. I browsed the tools-options dialog but I haven't found a way to set the directory to by static: C:\documents and setings\\My Documents\Visual Studio 2008\Backup Files. Can anybody point me with the right solution to this problem (probably the correct registry entry - I guess) ? thanks

  Read the article

• Issues Upgraging to Visual Studio 2010

  - by ringerce

  Just curious how many people are actually running 2010 and what's your feedback so far? Can I run 2010 concurrently with 2008 without issues? Also, are 2008 projects 100% compatible with 2010 and if so should I just uninstall 2008? Thanks for any feedback.

  Read the article

• Why am I missing 4GB of RAM on Windows Server 2008 R2 64bit?

  - by Nick G

  I noticed today that a server was very low on memory. It physically has 8GB installed and runs Windows 2008 R2 Standard 64bit. It also hosts 2 virtual machines using HyperV. Server is Dell Poweredge R510. However the host OS reports in task manager that it only has 4GB of RAM, despite actually having 8GB and it being a 64bit OS. Computer properties shows Installed memory: 8.00GB (3.99GB usuable). Why would "usable" be half the real RAM installed under a 64bit OS? Additionally nearly all of the 4GB of visible RAM on the host OS is being used by something without anything showing up in task manager (presumably HyperV as it's allocated 3.6GB to the virtual machines its hosting). However that doesn't explain where the other 4GB has gone which Windows can't even see. Where is my missing 4GB of RAM? Update: Dell OpenManage says this: Total Installed Capacity 8192 MB Total Installed Capacity Available to the OS 4096 MB So looks like Nathan's suggestion of memory mirroring might be correct. I'll have to reboot to check this (I think?) Update 2 OK. So I reboot and I get a message saying "the amount of system memory has changed" (despite not having touched the hardware in a year). Once Windows has booted, all 8GB is visible again. Looks like I probably have a hardware RAM issue (I'll perhaps try reseating it whenever I can chuck everyone off the server next). Thanks for your answers and comments. I was hoping it was going to be the mirrored-RAM option but it seems not - that's not even mentioned in the BIOS.

  Read the article

• Server 2008 R2 boot is at 2 hours and counting. What now?

  - by Jesse

  This morning, we rebooted our Server 2008 R2 box. No problem, came right back up. Then we shut it down and let it install windows updates. While it was off, we added some RAM. Then we turned it back on. The system came right back up to the "press ctrl-alt-delete" screen, so far, so good. I logged in. The system got as far as "Applying Group Policy" -- then spent almost an hour applying drive mappings. Finally finished that, and has now spent 30 minutes on waiting for the Event Notification Service. I still haven't been able to log in. Remote desktop service doesn't appear to be running yet. I tried viewing the event log from another machine. I see that the box is writing to the Security log, but there are no events in System or Application in the last 45 minutes. Digging through the System log of events from 45 minutes ago, I see a bunch of timeouts: A timeout (30000 milliseconds) was reached while waiting for a transaction response from the ShellHWDetection service. [lots of these] A timeout (30000 milliseconds) was reached while waiting for a transaction response from the wuauserv service. A timeout (30000 milliseconds) was reached while waiting for a transaction response from the SessionEnv service. A timeout (30000 milliseconds) was reached while waiting for a transaction response from the Schedule service. A timeout (30000 milliseconds) was reached while waiting for a transaction response from the CertPropSvc service. What can I do? Should I try shutting it down remotely, or will that do more damage?

  Read the article

• How do I remove duplicate SQL Server 2008 instances after upgrading from SQL Server 2005?

  - by andypike

  I've just upgraded an existing SQL Server 2005 to 2008 by running the installer (not the platform installer). It all seems to have worked - there were no errors reported and my code that connects to these databases still works fine. The problem is, when I try installing SQL Server Management Studio Express 2008 I am shown then following error message when I select to add new features to an existing instance of SQL Server 2008: The SQL Server instance 'SQL1MINUS102' already has an Instance ID '2' that is different than the specified Instance ID 'SQL1MINUS102'. Specifying more than one instance ID for the same SQL Server instance is not supported. Here is a screenshot of the installation dialog and the setup discovery report: Screenshot Notice that there are two instances with the same name. So any ideas how I should recifiy this so that I can install Management studio? Thanks in advance

  Read the article

• How to improve network performance between two Win 2008 KMV guest having virtio driver already?

  - by taazaa

  I have two physical servers with Ubuntu 10.04 server on them. They are connected with a 1Gbps card over a gigabit switch. Each of these host servers has one Win 2008 guest VM. Both VMs are well provisioned (4 cores, 12GB RAM), RAW disks. My asp.net/sql server applications are running much slower compared to very similar physical setups. Both machines are setup to use virtio for disk and network. I used iperf to check network performance and I get: Physical host 1 ----- Physical Host 2: 957 Mbits/sec Physical host 1 ----- Win 08 Guest 1: 557 Mbits/sec Win 08 Guest 1 ----- Phy host 1: 182 Mbits/sec Win 08 Guest 1 ----- Win 08 Guest 2: 111 Mbits /sec My app is running on Win08 Guest 1 and Guest 2 (web and db). There is a huge drop in network throughput (almost 90%) between the two guest. Further the throughput does not seem to be symmetric between host and guest as well. The CPU utilization on the guests and hosts is less than 2% right now (we are just testing right now). Apart from this, there have been random slow downs in the network to as low as 1 Mbits/sec making the whole application unusable. Any help to trouble shoot this would be appreciated.

  Read the article

• PHP mail() function stopped working on Windows 2008 R2 IIS 7.5. Why?

  - by Karl

  PHP 5.3.13 and as noted IIS 7.5. PHP mail() was working fine until I did 3 things (at the same time). (a) added memory to the server taking it from 4gb to 5gb; (b) ran Windows Update and applied all available updates; (c) removed SQL server installation. Windows 2008 R2 SMTP server still works fine. I know this because I can drop a file in the pickup folder and the mail is delivered. This PHP test script: <?php $to='my_name@another_domain.com'; $subject='Test email using PHP'; $message='This is a test email message'. "\r\n"; $headers='From:[email protected]' . "\r\n" . 'Reply-To:[email protected]' . "\r\n" . 'X-Mailer: PHP/' . phpversion(); mail($to, $subject, $message, $headers, '[email protected]'); ?> creates this entry in the PHP log file: mail() on [C:\www\pgs.com\store\admin\test_php_mail.php:1]: To: my_name@another_domain.com -- Headers: From:[email protected] Reply-To:[email protected] X-Mailer: PHP/5.3.13 PHP's mail.log. When using PHP now, I never see a file dropping on the IIS pickup folder. And on other thing, when using previouly working features on the site (such as password recovery), there is no entry made in the mail.log. (The mail log has just been setup to help solve this problem.) How do I fix this? Or at least how do I diagnose the problem? Thanks.

  Read the article

• Why won't sql server express 2008 service restart after I enable TCP/IP Protocol?

  - by John

  Whenever I enable TCP/IP connections on my SQL Server Express 2008 database server running on Windows XP SP3, I cannot restart the service, it simply states "The request failed or did respond in a timely fashion". Any suggestions of what I may have configured incorrectly? [update] Here is the applicable part of the Error Log: MSSQL$SQLEXPRESS Server failed to list on 'any' 3060. Error: 0x2747. To proceed, notify you system administrator. MSSQL$SQLEXPRESS TDSSNIClient initialization failed with error 0x2747, status code 0xa. Reason: Unable to initialize the TCP/IP listener. An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full. MSSQL$SQLEXPRESS TDSSNIClient initialization failed with error 0x2747, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full. MSSQL$SQLEXPRESS Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log. MSSQL$SQLEXPRESS SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.

  Read the article

• Can I recover a non-system disk deleted during 2008 R2 setup?

  - by serialhobbyist

  I've done a truly stupid thing and 'deleted' the data disk on a Server 2008 R2 box. Can I recover it? If so, how? I was rebuilding the box because a motherboard change had broken things. I've built loads of boxes and was going through the standard stuff without much concentration. I got to the disk screen which normally displays the two paritions on the drive: the recovery one and the system one. As normal, I deleted the two things I saw. It was only when two lots of unallocated space didn't merge into one that the full horror of what I'd done hit me. Yes, I've got backups... of the stuff I have space to back up. The real irony is that, earlier in the day, I'd ordered to 1 TB disks to deal with the problem. So, anyway, I'd really like to get this partition back because it'll save me a lot of time. How can I do it?

  Read the article

• SQL SERVER – DATE and TIME in SQL Server 2008

  - by pinaldave

  I was thinking about DATE and TIME datatypes in SQL Server 2008. I earlier wrote about the about best practices of the same. Recently I had written one of the script written for SQL Server 2008 had to run on SQL Server 2005 (don’t ask me why!), I had to convert the DATE and TIME datatypes to DATETIME. Let me run quick demo for the same. DECLARE @varDate AS DATE DECLARE @varTime AS TIME SET @varDate = '10/10/2010' SET @varTime = '12:12:12' SELECT CAST(@varDate AS DATETIME) C_Date SELECT CAST(@varTime AS DATETIME) C_Time As seen in example when DATE is converted to DATETIME it adds the of midnight. When TIME is converted to DATETIME it adds the date of 1900 and it is something one wants to consider if you are going to run script from SQL Server 2008 to earlier version with CONVERT. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: SQL, SQL Authority, SQL DateTime, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Date and Time Support in SQL Server 2008

  - by Aamir Hasan

    Using the New Date and Time Data Types Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} 1.       The new date and time data types in SQL Server 2008 offer increased range and precision and are ANSI SQL compatible. 2.       Separate date and time data types minimize storage space requirements for applications that need only date or time information. Moreover, the variable precision of the new time data type increases storage savings in exchange for reduced accuracy. 3.       The new data types are mostly compatible with the original date and time data types and use the same Transact-SQL functions. 4.       The datetimeoffset data type allows you to handle date and time information in global applications that use data that originates from different time zones. SELECT c.name, p.* FROM politics pJOIN country cON p.country = c.codeWHERE YEAR(Independence) < 1753ORDER BY IndependenceGO8.    Highlight the SELECT statement and click Execute ( ) to show the use of some of the date functions.T-SQLSELECT c.name AS [Country Name],        CONVERT(VARCHAR(12), p.Independence, 107) AS [Independence Date],       DATEDIFF(YEAR, p.Independence, GETDATE()) AS [Years Independent (appox)],       p.GovernmentFROM politics pJOIN country cON p.country = c.codeWHERE YEAR(Independence) < 1753ORDER BY IndependenceGO10.    Select the SET DATEFORMAT statement and click Execute ( ) to change the DATEFORMAT to day-month-year.T-SQLSET DATEFORMAT dmyGO11.    Select the DECLARE and SELECT statements and click Execute ( ) to show how the datetime and datetime2 data types interpret a date literal.T-SQLSET DATEFORMAT dmyDECLARE @dt datetime = '2008-12-05'DECLARE @dt2 datetime2 = '2008-12-05'SELECT MONTH(@dt) AS [Month-Datetime], DAY(@dt)     AS [Day-Datetime]SELECT MONTH(@dt2) AS [Month-Datetime2], DAY(@dt2)     AS [Day-Datetime2]GO12.    Highlight the DECLARE and SELECT statements and click Execute ( ) to use integer arithmetic on a datetime variable.T-SQLDECLARE @dt datetime = '2008-12-05'SELECT @dt + 1GO13.    Highlight the DECLARE and SELECT statements and click Execute ( ) to show how integer arithmetic is not allowed for datetime2 variables.T-SQLDECLARE @dt2 datetime = '2008-12-05'SELECT @dt2 + 1GO14.    Highlight the DECLARE and SELECT statements and click Execute ( ) to show how to use DATE functions to do simple arithmetic on datetime2 variables.T-SQLDECLARE @dt2 datetime2(7) = '2008-12-05'SELECT DATEADD(d, 1, @dt2)GO15.    Highlight the DECLARE and SELECT statements and click Execute ( ) to show how the GETDATE function can be used with both datetime and datetime2 data types.T-SQLDECLARE @dt datetime = GETDATE();DECLARE @dt2 datetime2(7) = GETDATE();SELECT @dt AS [GetDate-DateTime], @dt2 AS [GetDate-DateTime2]GO16.    Draw attention to the values returned for both columns and how they are equal.17.    Highlight the DECLARE and SELECT statements and click Execute ( ) to show how the SYSDATETIME function can be used with both datetime and datetime2 data types.T-SQLDECLARE @dt datetime = SYSDATETIME();DECLARE @dt2 datetime2(7) = SYSDATETIME();SELECT @dt AS [Sysdatetime-DateTime], @dt2     AS [Sysdatetime-DateTime2]GO18.    Draw attention to the values returned for both columns and how they are different.Programming Global Applications with DateTimeOffset 2.    If you have not previously created the SQLTrainingKitDB database while completing another demo in this training kit, highlight the CREATE DATABASE statement and click Execute ( ) to do so now.T-SQLCREATE DATABASE SQLTrainingKitDBGO3.    Select the USE and CREATE TABLE statements and click Execute ( ) to create table datetest in the SQLTrainingKitDB database.T-SQLUSE SQLTrainingKitDBGOCREATE TABLE datetest (  id integer IDENTITY PRIMARY KEY,  datetimecol datetimeoffset,  EnteredTZ varchar(40)); Reference:http://www.microsoft.com/downloads/details.aspx?FamilyID=E9C68E1B-1E0E-4299-B498-6AB3CA72A6D7&displaylang=en   

  Read the article

• Using progress dialog in Visual Studio extensions

  - by Utkarsh Shigihalli

  Originally posted on: http://geekswithblogs.net/onlyutkarsh/archive/2014/05/23/using-progress-dialog-in-visual-studio-extensions.aspxAs a Visual Studio extension developer you are required to keep the aesthetics of Visual Studio in tact when you integrate your extension with Visual Studio. Your extension looks odd when you try to use windows controls and dialogs in your extensions. Visual Studio SDK exposes many interfaces so that your extension looks as integrated with Visual Studio as possible. When your extension is performing a long running task, you have many options to notify the progress to the user. One such option is through Visual Studio status bar. I have previously blogged about displaying progress through Visual Studio status bar. In this blog post I am going to highlight another way using IVsThreadedWaitDialog2 interface. One thing to note is, as the IVsThreadedWaitDialog2 interface name suggests it is a dialog hence user cannot perform any action when the dialog is being shown. So Visual Studio seems responsive to user, even when a task is being performed. Visual Studio itself makes use of this interface heavily. One example is when you are loading a solution (.sln) with lot of projects Visual Studio displays dialog implemented by this interface (screenshot below). So the first step is to get the instance of IVsThreadedWaitDialog2 interface using IServiceProvider interface. var dialogFactory = _serviceProvider.GetService(typeof(SVsThreadedWaitDialogFactory)) as IVsThreadedWaitDialogFactory; IVsThreadedWaitDialog2 dialog = null; if (dialogFactory != null) { dialogFactory.CreateInstance(out dialog); } So if your have the package initialized properly out object dialog will be not null and would contain the instance of IVsThreadedWaitDialog2 interface. Once the instance is got, you call the different methods to manage the dialog. I will cover 3 methods StartWaitDialog, EndWaitDialog and HasCanceled in this blog post. You show the progress dialog as below. if (dialog != null && dialog.StartWaitDialog( "Threaded Wait Dialog", "VS is Busy", "Progress text", null, "Waiting status bar text", 0, false, true) == VSConstants.S_OK) { Thread.Sleep(4000); } As you can see from the method syntax it is very similar to standard windows message box. If you pass true to the 7th parameter to StartWaitDialog method, you will also see a cancel button allowing user to cancel the running task. You can react when user cancels the task as below. bool isCancelled; dialog.HasCanceled(out isCancelled); if (isCancelled) { MessageBox.Show("Cancelled"); } Finally, you can close the dialog when you complete the task running as below. int usercancel; dialog.EndWaitDialog(out usercancel); To help you quickly experience the above code, I have created a sample. It is available for download from GitHub. The sample creates a tool window with two buttons to demo the above explained scenarios. The tool window can be accessed by clicking View –> Other Windows -> ProgressDialogDemo Window

  Read the article

< Previous Page | 102 103 104 105 106 107 108 109 110 111 112 113  | Next Page >