Search Results

Search found 92127 results on 3686 pages for 'user folders'.

Page 1065/3686 | < Previous Page | 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072  | Next Page >

  • Change Laptop Wireless Card?

    - by Craig
    I have just bought a new Samsung RV511 Laptop (the i5 Version). Anyway it comes installed with a Broadcom Wifi Card, I have a Super Atheros Mini Wifi Card that I would like to swap for the Broadcom one. I use Atheros for security auditing purposes in Linux that the Broadcom one is not good for. Trouble is I have never got to the barebones of a laptop, although I am a Custom PC Builder, laptops i generally have no concern for. Take a look at this picture, I took one back panel off to reveal some of the components: I believe the Wireless Card is where I marked the arrow pointing too. That little white square thing appears to be a sticker of the Wifi card, it says WLAN. How can I access it to swap it with my Atheros one. Do I need to remove all the outermost screws? There are screws located to the right of where I scribbled in Yellow and next to the HDD, do I just remove those? I dont want to destroy the machine, only just got it today. Appreciate some help thanks.

    Read the article

  • Saving a Word document as Web Page, Filtered drastically reduces image resolution

    - by Abdullah Jibaly
    I have a document with hundreds of images. When I save the first image (right click and save picture) it ends up with a good resolution as shown below: However, when I save the document as Web Page, Filtered, all the images end up really low-res. Here's the exact same image afterwards: I've tried the following options in the Save As dialog with no luck: In Tools > Web Options... > Pictures > Target Monitor I've set the Pixels Per Inch to the highest value, 120. In Tools > Compress Pictures > Target Output I've set it to Print (220 ppi). Any ideas would be appreciated.

    Read the article

  • Mac OS X - configuring ntpd server with on LAN with D-Link DIR-655

    - by Mark C
    Hey all, This question is pretty specific, but I hope someone will have seen this error elsewhere. I a configuring a machine running OS X 10.5.8 to be an NTP server for machines connected to a LAN that is not connected to the Internet. I am not too worried about knowing the "right" time on all the machines, but rather worried about making sure everyone has the same notion of time. I configured the NTP daemon on Mac by turning on the Set date and time automatically in System Preferences, using the server's clock, 127.127.1.0 as the reference clock. I figured I should see if the server can NTP query itself before proceeding to the clients. The weird part is when I run the ntpq -p command in a command-prompt when connected to my D-Link DIR-655 (firmware: 1.33), it hangs for about a minute or so each time before finally giving me some output. I thought the problem might have to do with Port Forwarding, so I configured the router to forward port 123 for the IP of the server, but that did not improve the situation. When I run the ntpq -p command on my school's network, on a Linksys WRT54G router, or with the wireless Airport card turned off - I have absolutely no problems - the command returns a response instantly. Is this normal? I can see why a query might take a minute or so, but I don't understand why one router does it faster than the other. I tried messing around with the ntp.conf file adding the burst, minpoll, and maxpoll options: server 127.127.1.0 burst minpoll 4 maxpoll 5 Figuring that perhaps I am polling too often and the configuration file is slowing me down, but even with this, the ntpq still hangs on the D-Link DIR-655, but does just fine on the other routers. Any thoughts on where the lag is coming from or if the lag is even a problem?

    Read the article

  • Shared printer hosted by Windows 7 to XP peers [closed]

    - by Alistair Knock
    Possible Duplicate: Add Network Printer drivers in Windows 7/Server 2008 R2? A Canon Pixma ip4600 installed all by itself when connected to a Windows 7-64 bit machine. I then updated it with the add-on Canon provide to give additional functionality. I then wish to share it with a box which is running Windows XP 32-bit. The XP box can see the printer but can't find a driver from the 7 machine, which is fine. I ask the 7 machine to get the x86 drivers, but it can't. I install the 32-bit XP drivers on the XP machine, but unlike previous Canon drivers (which unzip to give an .inf file), they assume a local printer and partially give up. I find the .inf file in the Program files\CanonBJ\... directory. Neither the XP machine, nor the 7 machine when the CanonBJ directory is shared to it, is happy with the .inf file. I attempt to install the 32-bit drivers on the 64-bit 7 machine, which, understandably, fail. Where do we go from here? (I apologise for posting in the first-person, I'm not sure why this was)

    Read the article

  • OSX 10.6 goes unresponsive

    - by mjb
    This behavior continues to perplex me. My MBP, running 10.6.7, stops responding to all Apple-based software. Whatever software I have open remains open (Terminal, iTunes, Safari), but if I try to use the F-shortcuts or launch any OSX-based software not already open (System Preferences for example) it just bounces in the dock then never launches. I also cannot reboot without hard rebooting. I left terminal open, so I see the following in /var/log/system.log Jun 25 19:39:02 mjb-2 com.apple.ReportCrash.Root[59432]: 2011-06-25 19:39:02.585 ReportCrash[59432:7f1f] Saved crash report for CoreServicesUIAgent[59576] version ??? (???) to /Library/Logs/DiagnosticReports/CoreServicesUIAgent_2011-06-25-193902_localhost.crash Jun 25 19:39:02 mjb-2 com.apple.ReportCrash.Root[59432]: 2011-06-25 19:39:02.586 ReportCrash[59432:b10f] Saved crash report for quicklookd[59571] version ??? (???) to /Library/Logs/DiagnosticReports/quicklookd_2011-06-25-193902_localhost.crash Two requests: (1) please don't send this off to the Apple area so it can die a slow painful rotting death of tumbleweed. (2) Suggest what I should kill -9 or logs to look at to cut this sh*$ out. Cheers, mjb

    Read the article

  • How do I create a wifi network bridge with qemu on OS X?

    - by a paid nerd
    I grabbed a small FreeBSD live CD and QEMU, and I'm trying to bridge my Mac OS X 10.8 wifi connection so that the guest OS is available on my LAN. However, the guest OS never gets a DHCP lease. This works perfectly with VirtualBox in their "bridged" network mode, so I know it can be done. I need to get it working with QEMU because VirtualBox doesn't support the architecture that I need for this project. Here's what I've done so far based on hours of googling: Installed TUNTAP for OS X Told OS X to supposedly forward all packets, even ARP: (NOTE: This doesn't appear to work.) $ sudo sysctl -w net.inet.ip.forwarding=1 $ sudo sysctl -w net.link.ether.inet.proxyall=1 $ sudo sysctl -w net.inet.ip.fw.enable=1 Created a bridge: $ sudo ifconfig bridge0 create $ sudo ifconfig bridge0 addm en0 addm tap0 $ sudo ifconfig bridge0 up $ ifconfig bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether ac:de:xx:xx:xx:xx Configuration: priority 0 hellotime 0 fwddelay 0 maxage 0 ipfilter disabled flags 0x2 member: en0 flags=3<LEARNING,DISCOVER> port 4 priority 0 path cost 0 member: tap0 flags=3<LEARNING,DISCOVER> port 8 priority 0 path cost 0 tap0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 ether ca:3d:xx:xx:xx:xx open (pid 88244) Started tcpdump with -I in the hopes that it enables promiscuous mode on the wifi device: $ sudo tcpdump -In -i en0 Run QEMU using the bridged network instructions: $ qemu-system-x86_64 -cdrom mfsbsd-9.2-RELEASE-amd64.iso -m 1024 \ -boot d -net nic -net tap,ifname=tap0,script=no,downscript=no But the guest system never gets a DHCP lease: If I tcpdump -ni tap0, I see lots of traffic from the wireless network. But if I tcpdump -ni en0, I don't see any DHCP traffic from the QEMU guest OS. Any ideas? Update 1: I tried sudo defaults write "/Library/Preferences/SystemConfiguration/com.apple.Boot" "Kernel Flags" "net.inet.ip.scopedroute=0" and rebooting per this mailing list suggestion, but this didn't help. In fact, it made VirtualBox bridged mode stop working.

    Read the article

  • Blinking power button

    - by Mike Ramsey
    A friend asked me to look at his Gateway DX4640 desktop. When he presses the power button, power goes to the mobo (NVIDIA nForce 630i MCP73PV, GeForce 7100 chipset) and the CPU fan starts spinning. The power button slowely blinks on and off (blue) and the screen briefly says no signal and then goes black. And nothing else; no post code beeps. My initial two conjectures were: 1. Vista was stuck in sleep/hibernation mode, or 2. A power off had left the mobo in a bad state. The fix for both is to: a) Unplug the AC power cord b) hold the power button for 30 second to fully discharge the mobo It didn't help. I left the system unplugged from AC power for an hour. No change. I am out of ideas. Has anybody seen anything like this before? What does a blinking blue power button mean? How can I get more data points to guide trouble shooting? --Thank you, --Mike

    Read the article

  • Sharing external storage between different operating systems?

    - by CT
    I just received a Lacie 1TB external usb/firewire/esata drive. I have 2 machines. A macbook running osx 10.6 and a desktop running windows 7. I would like to rip my dvd collection to iso and store on my external. Right now I use my macbook's disk utility to rip dvds to iso. However my desktop is what is connected to my hdtv. I mainly just use the desktop for media. I'd like to format the external with a 200 GB partition for time machine backups and have the rest for storage. DVD iso are often above 8GB so that sort of eliminates FAT file systems correct? Do I have any options to be able to have my mac and pc both see the drive?

    Read the article

  • ubuntu gnome short cut keys

    - by benjipete
    Hi, I have done something quite silly and not sure how to fix it. I modified some of the gnome keyboard short cuts and was trying to disable the "Run Application" command. In the process I assigned it to the delete key and every time I hit delete the "Run Application" window comes up. It would not normally be a problem but the "Keyboard Shortcuts" no long has the short cut in the window so I can't disable it. Any help advice would be appreciated. Cheers Ben

    Read the article

  • Replace spaces in file names from cmd line unix

    - by Aly
    Hi I have a bunch of files with spaces in the name, is there a way to mv them to new files without spaces in. For example I have the file Hello World.pdf I want to move it to Hello_World.pdf. Obviously for the one file I can use the mv command but I want to do it to all files in a folder. Thanks

    Read the article

  • Can I turn my Mac Mini into a Wi-Fi Hotspot without additional tool

    - by user262325
    Hello everyone I have an app need to test via wifi. I just wonder if there is a way to turn my Mac Mini into a Wi-Fi Hotspot without additional tool. I try to setup airport new network name is"mymacmini'. My iPod Touch also can recognize the network "mymacmini". I set my iPod wifi as "mymacmini" But if I try to connect to Internet, Safari always reports failure and connnection with Wifi. I hope to know if I need purchase a wireless router for MAc Mini or there are something wrong I did above? Thanks interdev

    Read the article

  • Optimize shell and awk script

    - by bryan
    I am using a combination of a shell script, awk script and a find command to perform multiple text replacements in hundreds of files. The files sizes vary between a few hundred bytes and 20 kbytes. I am looking for a way to speed up this script. I am using cygwin. The shell script - #!/bin/bash if [ $# = 0 ]; then echo "Argument expected" exit 1 fi while [ $# -ge 1 ] do if [ ! -f $1 ]; then echo "No such file as $1" exit 1 fi awk -f ~/scripts/parse.awk $1 > ${1}.$$ if [ $? != 0 ]; then echo "Something went wrong with the script" rm ${1}.$$ exit 1 fi mv ${1}.$$ $1 shift done The awk script (simplified) - #! /usr/bin/awk -f /HHH.Web/{ if ( index($0,"Email") == 0) { sub(/HHH.Web/,"HHH.Web.Email"); } printf("%s\r\n",$0); next; } The command line find . -type f | xargs ~/scripts/run_parser.sh

    Read the article

  • Cannot find Ruby on Rails installed

    - by James
    I've managed to install Ruby and the gems install (rvm?) but now I'm stuck actually installing Ruby on Rails. Every time I execute, gem install rails Terminal says that it's fetching each file and that it successfully installed it: 1 gem installed However when I then run the rails command, I'm told that it's not installed and to run the gem install rails command again. I've attempted to install with sudo but the same thing happens. I've restarted after an install and that's not worked. Ideas?

    Read the article

  • IP Micro-outages, telephone micro-outages, and CATV micro-outages

    - by Michael Graff
    This is a long and complicated question, mostly because it has been going on for 2.5 years without a solution in sight. It also is only one-third computer related, the other two-thirds are cable TV and cable-phone related. Background I have COX Communications for a cable provider, and we get Internet, digital cable TV, and digital phone service through them. The Internet is a SB5101 right now, and has been a DPC2100 and SB5120 in the past. Same results. The phone service is provided through a telephone interface mounted on the outside of the house (not classic VoIP) and the CATV is through a Scientific Atlanta receiver without DVR. I do have a TiVo connected to the CATV box. Symptoms The CATV shows "blocking" -- sometimes very very short duration where a few blocks appear on the screen. Sometimes it lasts long enough that the video "pauses" for 2-5 seconds, and rarely but not unseen the audio also fails. The CATV decoder box shows no correctable (FEC) or uncorrectable errors. That is, all BER counters are zero for the video stream. The Internet shows "micro-outages" where it appears that sent packets are not making it out, but I continue to receive packets from local modems. That is, pings stop coming back, but I continue to see modems broadcast for DHCP, and sometimes they ask more than once. The cable modem shows no errors during this time, but cable modems lie like you would not believe. It is actually possible to unplug the coax from the modem for 20 seconds and it reports NO ERRORS to the provider's tools. The phone service cuts out for 1-3 seconds, infrequently. When this happens, I hear NOTHING (not even comfort noise) and the remote side hears a "click" as if I were getting a call waiting message. However, there is no call incoming, other than the one I'm currently on of course. Things SEEM to happen more frequently when the temperature outside swings from cold to warm, so fall/spring seems worse than summer/winter. All micro-outages occur between once or twice a day (which I could ignore) to 10 times per hour. All SNR, signal levels, noise levels, etc. show very close to optimal when measured. COX's diagnosis This is a continual pain for me. Over the last 2.5 years, they have opened, "fixed" something, and closed the tickets. They close it without confirming that it is indeed better, and when I reopen they cannot do that, but instead they open a new ticket and send yet another low-level tech out to do the same signal tests and report that all is OK. I've finally gotten a line tech who has a clue and is motivated enough to pursue this with me. We have tried things like switching the local nodes over to UPS and generator power, but this does not trigger the noise. We have tried replacing all cabling, the tap outside my house, the modem, the CATV decoder -- all without resolution. Recently they have decided it is both my computer or switch, my TiVo, and my phone that are all broken and causing this issue. My debugging steps I spent the worse day of my TV-watching life yesterday and part of today. I watched live TV without the TiVo. I witnessed blocking, but it did "feel different." and was actually more severe. Some days it is better, some days it is worse, so perhaps this was just a very bad day. Today, I connected the TiVo to my DVD player, and ran two very long movies through it. I saw no blocking at all during nearly 6 hours of video. Suggestions? Does anyone have any suggestions on what to do next? I understand perhaps only the IP side can be addressed here, but it is one of the more limiting debugging options.

    Read the article

  • Cannot get Windows snipping tool to auto run with AutoHotKey

    - by jasondavis
    I am trying to get Windows 7 sniping tool to run when I hit my PRINTSCREEN keyboard button with AUTOHOTKEY. I have been unsuccessful so far though. Here is what I have for the AutoHotKey script. I have tried this PRINTSCREEN::Run, c:\windows\system32\SnippingTool.exe and this PRINTSCREEN::Run, SnippingTool.exe and this PRINTSCREEN::Run, SnippingTool And all those give me this error when I hit the PRINTSCREEN button... It basicly says it cannot find the file, however the file path seems to be correct, I can copy paste it into a window and it opens the snipping tool, any ideas why it will not work? Here is the full code to my AHK file... ; ; AutoHotkey Version: 1.x ; Language: English ; Platform: Win7 ; Author: Jason Davis <friendproject@> ; ; Script Function: ; Template script (you can customize this template by editing "ShellNew\Template.ahk" in your Windows folder) ; #NoEnv ; Recommended for performance and compatibility with future AutoHotkey releases. SendMode Input ; Recommended for new scripts due to its superior speed and reliability. SetWorkingDir %A_ScriptDir% ; Ensures a consistent starting directory. /* PRINTSCREEN = Will run Windows 7 snipping tool */ PRINTSCREEN::Run, c:\windows\system32\SnippingTool.exe return

    Read the article

  • Does mailx send mail using an SMTP relay or does it directly connect to the target SMTP server?

    - by iamrohitbanga
    Suppose i send a mail using the following the following command: mailx [email protected] then does mailx first try to find out the SMTP server of my ISP for relaying the mail or does it connect directly. Does it depend on whether my PC has a public IP address or it is behind a NAT. How do I check the settings of mailx on my PC? How can I verify this using tcpdump?

    Read the article

  • Music but no voices on headphones

    - by TheEmeritus
    I have a laptop with Windows 7 and I have headphones for a couple of months, and only recently they started to play only the music, while the voices are there, but just very faint. I tried to connect them to another computer (PC, windows XP) and they worked fine, which made me think the problem isn't with the headphones but with the laptop. I've searched online and found a few solutions, none of the seemed to work. Such as: plugging in and out my jack until you can hear better, checking the headphones on other computers. Other relevant info: The headphones come with a mic if I right click the sound icon - sound devices. Then I dont see any 'headphones', not even if I tell it to show disabled devices. All I see is a 'speakers' icon, yet it's there even if the headphones are disconnected, and is always active. So if anyone has any idea I'd appreciate it :) Thanks!

    Read the article

  • remote desktop to Fedora 20 with xrdp

    - by 5YrsLaterDBA
    I was able to setup xrdp on my Fedora 13 machine and access it from my Windows 7 machine by follow the steps on the first post on this thread It was simple and easy. But when i try the same on my Fefora 20 machine, things are quite different. There is no error message but some new info like these: # chkconfig --levels 35 xrdp on Note: Forwarding request to 'systemctl enable xrdp.service'. # service xrdp start Redirecting to /bin/systemctl start xrdp.service and then I cannot remote it from my window machine. I also did the following based on the last post of above threa: # yum -y install tigervnc-server Any configuration I should do to make xrdp works for me? I was able to ping each other. EDIT: I can access the shared folder on my Windows machine from my Fedora 20. It seems the problem is on the Fedora side. how to know the service on linux is running? The "service --status-all" cannot give me useful information.

    Read the article

  • Accessing SQL Server in Windows XP Mode Virtual Pc

    - by DavidStein
    I have a laptop running 64bit Windows 7 Ultimate. I created a Virtual PC using Microsoft XP Mode. I've installed SQL Server 2000 on the Virtual Machine. I have SQL Server 2008 R2 installed on the Windows 7 machine (laptop). I can browse to the SQL 2000 instance (it sees it), but I cannot successfully connect using either Windows or SQL Server Authentication. I don't get an error, the attempt just times out. I have the Windows XP Mode Firewall turned off, and there doesn't appear to be anything in the Event logs either. Any ideas how I can query the XP Mode SQL Server from the Windows 7 machine?

    Read the article

  • What does it mean for the file name to be shown with red background

    - by user56614
    I'm trying to install Cisco VPN client on Linux Ubuntu 10.04. The installer creates the directory, places all the necessary files in it, and then fails to launch the binary. I tried to launch it myself, the system rebukes me too. Closer inspection yields the following: eugene@eugene-desktop:/opt/cisco/vpn/bin$ sudo chmod u+x vpnagentd eugene@eugene-desktop:/opt/cisco/vpn/bin$ ls -la total 5124 drwxr-xr-x 2 root root 4096 2010-10-23 11:51 . drwxr-xr-x 6 root root 4096 2010-10-23 11:51 .. -rwxr-xr-x 1 root root 1607236 2010-10-23 11:51 vpn -rwsr-xr-x 1 root root 1204692 2010-10-23 11:51 vpnagentd -r--r--r-- 1 root root 697380 2010-10-23 11:51 vpndownloader.sh -rwxr-xr-x 1 root root 1712708 2010-10-23 11:51 vpnui -rwxr-xr-x 1 root root 3654 2010-10-23 11:51 vpn_uninstall.sh eugene@eugene-desktop:/opt/cisco/vpn/bin$ ./vpnagentd bash: ./vpnagentd: No such file or directory eugene@eugene-desktop:/opt/cisco/vpn/bin$ sudo ./vpnagentd sudo: unable to execute ./vpnagentd: No such file or directory The file name "vpnagentd" is shown in white letters with red background. The other three executables are in green letters with black background, as expected. Any ideas?

    Read the article

< Previous Page | 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072  | Next Page >