Search Results

Search found 4830 results on 194 pages for 'conf'.

Page 107/194 | < Previous Page | 103 104 105 106 107 108 109 110 111 112 113 114  | Next Page >

• Issues in getting Synergy setup

  - by chris

  For some reason I cannot get things working when the Linux box is the server and the macbook pro is the client. However I can get things working just fine in the inverse, unfortunately since the macbook is not the primary machine, and not powered on all the time, the later setup won't work. Here is the error that I am getting: started client connecting to '10.0.1.4': 10.0.1.4:24800 The only firewall that I have is the one on the router, so since things work with the macbook as the server I am pretty sure that is not where the problem is. Here is the .synergy.conf file section: screens Chris-MacBook-Pro: # I have tried this with the .local as well chris-archlinux.local: end section: links Chris-MacBook-Pro: right = chris-archlinux.local chris-archlinux.local: left = Chris-MacBook-Pro.local end ** Update: I should also add that I can ping the linux machine from the mac. To try get things working, I have also prevented the hosts.deny/.allow files from blocking anything. An ideas to where the problem could be?

  Read the article

• tmux combine multiple commands to one vi-copy command or tmux command to yank a line

  - by MIkhail

  In tmux, i know we can chain multiple commands to a key by using \; See Here But in vi mode, i want one single key press to go to the beginning of the current line, begin-selection, go to end-of-line, copy-selection. In tmux.conf if i give the following bind-key -t vi-copy 's' start-of-line \; begin-selection \; end-of-line \; copy-selection \; It gives me this : 69: usage: bind-key [-cnr] [-t key-table] key command [arguments] error. Or is there any alternative way to yank the current line in single key.

  Read the article

• amanda backup problem

  - by hossam alkhalili

  hello, i installed amanda on centos 5.5 to backup windows 7 and windows server 2008 over network and i used 15 minutes instillation guide but when i type amcheck DailySet1 i got request failed then if i type amservice when i amandabackup account to define the problem i got Permission denied and on root account i got OPTIONS features=ff7fffff9cfeffffd3cf1300; i use zwc on windows 7 as an agent can anyone help me thanks -sh-3.2$ amcheck DailySet1 Amanda Tape Server Host Check Holding disk /dumps/amanda: 1791315968 KB disk space available, using 1791213568 KB slot 1: volume 'DailySet1-01' Will write to volume 'DailySet1-01' in slot 1. NOTE: skipping tape-writable test NOTE: conf info dir /etc/amanda/DailySet1/curinfo does not exist NOTE: it will be created on the next run. NOTE: index dir /etc/amanda/DailySet1/index does not exist NOTE: it will be created on the next run. Server check took 0.880 seconds Amanda Backup Client Hosts Check WARNING: jrcbs01.jrc.local: selfcheck request failed: Connection refused Client check: 1 host checked in 10.020 seconds. 1 problem found. amservice 192.168.1.1 bsdtcp noop [root@jrcbs01 ~]# amservice 192.168.1.5 bsdtcp noop

  Read the article

• amanda backup problem

  - by hossam alkhalili

  hello, i installed amanda on centos 5.5 to backup windows 7 and windows server 2008 over network and i used 15 minutes instillation guide but when i type amcheck DailySet1 i got request failed then if i type amservice when i amandabackup account to define the problem i got Permission denied and on root account i got OPTIONS features=ff7fffff9cfeffffd3cf1300; i use zwc on windows 7 as an agent can anyone help me thanks -sh-3.2$ amcheck DailySet1 Amanda Tape Server Host Check Holding disk /dumps/amanda: 1791315968 KB disk space available, using 1791213568 KB slot 1: volume 'DailySet1-01' Will write to volume 'DailySet1-01' in slot 1. NOTE: skipping tape-writable test NOTE: conf info dir /etc/amanda/DailySet1/curinfo does not exist NOTE: it will be created on the next run. NOTE: index dir /etc/amanda/DailySet1/index does not exist NOTE: it will be created on the next run. Server check took 0.880 seconds Amanda Backup Client Hosts Check WARNING: jrcbs01.jrc.local: selfcheck request failed: Connection refused Client check: 1 host checked in 10.020 seconds. 1 problem found. amservice 192.168.1.1 bsdtcp noop [root@jrcbs01 ~]# amservice 192.168.1.5 bsdtcp noop

  Read the article

• connecting to redis from wsgi application

  - by W_P

  I am running redis and httpd with mod_wsgi on the same server. I have a wsgi application using a virtualenv and the follow virtualhost conf: WSGIPythonPath /var/www/wsgi <VirtualHost *:80> ServerName test.example.com DocumentRoot /var/www/html WSGIScriptAlias / /var/www/wsgi/myapp/app.wsgi CustomLog logs/test.example.com-access-log common ErrorLog logs/test.example.com-error-log <Directory /var/www/wsgi/myapp> Order allow,deny Allow from all WSGIScriptReloading On </Directory> </VirtualHost> I have a sites.pth in my /var/www/wsgi directory, adding myapp to the PYTHONPATH, and this is my /var/www/wsgi/myapp/app.wsgi: activate_this = '/var/www/envs/myapp/bin/activate_this.py' execfile( activate_this, dict(__file__=activate_this) ) from myapp.application import app as application Sorry, I am trying to edit the question to have the rest of my info by it keeps timing out before the edits go through

  Read the article

• Ubuntu 9.10 and Squid 2.7 Transparent Proxy TCP_DENIED

  - by user298814

  Hi, We've spent the last two days trying to get squid 2.7 to work with ubuntu 9.10. The computer running ubuntu has two network interfaces: eth0 and eth1 with dhcp running on eth1. Both interfaces have static ip's, eth0 is connected to the Internet and eth1 is connected to our LAN. We have followed literally dozens of different tutorials with no success. The tutorial here was the last one we did that actually got us some sort of results: http://www.basicconfig.com/linuxnetwork/setup_ubuntu_squid_proxy_server_beginner_guide. When we try to access a site like seriouswheels.com from the LAN we get the following message on the client machine: ERROR The requested URL could not be retrieved Invalid Request error was encountered while trying to process the request: GET / HTTP/1.1 Host: www.seriouswheels.com Connection: keep-alive User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US) AppleWebKit/532.9 (KHTML, like Gecko) Chrome/5.0.307.11 Safari/532.9 Cache-Control: max-age=0 Accept: application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,/;q=0.5 Accept-Encoding: gzip,deflate,sdch Cookie: __utmz=88947353.1269218405.1.1.utmccn=(direct)|utmcsr=(direct)|utmcmd=(none); __qca=P0-1052556952-1269218405250; __utma=88947353.1027590811.1269218405.1269218405.1269218405.1; __qseg=Q_D Accept-Language: en-US,en;q=0.8 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 Some possible problems are: Missing or unknown request method. Missing URL. Missing HTTP Identifier (HTTP/1.0). Request is too large. Content-Length missing for POST or PUT requests. Illegal character in hostname; underscores are not allowed. Your cache administrator is webmaster. Below are all the configuration files: /etc/squid/squid.conf, /etc/network/if-up.d/00-firewall, /etc/network/interfaces, /var/log/squid/access.log. Something somewhere is wrong but we cannot figure out where. Our end goal for all of this is the superimpose content onto every page that a client requests on the LAN. We've been told that squid is the way to do this but at this point in the game we are just trying to get squid setup correctly as our proxy. Thanks in advance. squid.conf acl all src all acl manager proto cache_object acl localhost src 127.0.0.1/32 acl to_localhost dst 127.0.0.0/8 acl localnet src 192.168.0.0/24 acl SSL_ports port 443 # https acl SSL_ports port 563 # snews acl SSL_ports port 873 # rsync acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl Safe_ports port 631 # cups acl Safe_ports port 873 # rsync acl Safe_ports port 901 # SWAT acl purge method PURGE acl CONNECT method CONNECT http_access allow manager localhost http_access deny manager http_access allow purge localhost http_access deny purge http_access deny !Safe_ports http_access deny CONNECT !SSL_ports http_access allow localhost http_access allow localnet http_access deny all icp_access allow localnet icp_access deny all http_port 3128 hierarchy_stoplist cgi-bin ? cache_dir ufs /var/spool/squid/cache1 1000 16 256 access_log /var/log/squid/access.log squid refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern (Release|Package(.gz)*)$ 0 20% 2880 refresh_pattern . 0 20% 4320 acl shoutcast rep_header X-HTTP09-First-Line ^ICY.[0-9] upgrade_http0.9 deny shoutcast acl apache rep_header Server ^Apache broken_vary_encoding allow apache extension_methods REPORT MERGE MKACTIVITY CHECKOUT cache_mgr webmaster cache_effective_user proxy cache_effective_group proxy hosts_file /etc/hosts coredump_dir /var/spool/squid access.log 1269243042.740 0 192.168.1.11 TCP_DENIED/400 2576 GET NONE:// - NONE/- text/html 00-firewall iptables -F iptables -t nat -F iptables -t mangle -F iptables -X echo 1 | tee /proc/sys/net/ipv4/ip_forward iptables -t nat -A POSTROUTING -j MASQUERADE iptables -t nat -A PREROUTING -p tcp --dport 80 -j REDIRECT --to-port 3128 networking auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 142.104.109.179 netmask 255.255.224.0 gateway 142.104.127.254 auto eth1 iface eth1 inet static address 192.168.1.100 netmask 255.255.255.0

  Read the article

• Creating a development environment from a shared hosting production environment (LAMP)

  - by bobo

  The production server is shared, I don't have access to php.ini and httpd.conf and most PHP settings cannot be set or overrided using ini_set PHP function. So I would like to create a local development environment having configurations as close as it can be to those of the production environment (LAMP). I don't have shell access to the server but using exec PHP function to run some simple commands is possible. I am using Windows XP Pro and I am going to install on VMWare a linux distribution that is more or less the same as the production server. However, installing apache, mysql and php, and then configuring them like those on the production server is not a easy task. It would be great if there exists any tools that are useful in this situation, tools that can analyze/ inspect the production server and then produce something that can help replicating the environment would be useful. If not, what should I be aware of when I try to manually replicate the production environment?

  Read the article

• Nginx ssl redirection of images

  - by krishna raj

  Hi. I am trying to set up nginx as reverse proxy for a tomcat server using SSL connection. I want the client's browser to load my tomcat application when nginx reverse proxy's IP is called from client's browser. My tomcat application's address is 192.168.25.25 and nginx proxy's address is 192.168.25.50 In my nginx.conf file i have added these lines # location / { proxy_pass https://192.168.25.25:443/myapp/; proxy_redirect https://192.168.25.25/myapp/ https://192.168.25.25/; } # Some of the images in my application is stored at 192.168.25.25/images/ . Now these directories cant be accessed as the proxy_pass is set to 192.168.25.25:443/myapp. Is there way to access images directory also without changing proxy_pass ? Thanks in advance.

  Read the article

• WebDAV, SVN, Apache2 on OS X 10.6.2

  - by David

  I'm trying to configure SVN server on OS X 10.6.2 via Apache2. Whenever I enable the module in Wev - Settings - Services then try accessing the site, it fails. So I attempted an apachectl configtest and I'm getting a crazy amount of errors: httpd: Syntax error on line 132 of /private/etc/apache2/httpd.conf: Cannot load /usr/libexec/apache2/mod_dav_fs.so into server: dlopen(/usr/libexec/apache2/mod_dav_fs.so, 10): Symbol not found: _dav_add_response\n Referenced from: /usr/libexec/apache2/mode_dev_fs.so\n Expected in: flat namespace\n in /usr/livexec/apache2/mod_dav_fs.so When I attempt disabling the related services and enabling then one by one (dav_fs_module, dav_module, dav_svn_module and authz_svn_mod each seems to fail. What the heck. :-( Thanks in advance, Dave

  Read the article

• How to calibrate Wacom tablets under Ubuntu Lucid?

  - by Calvin Fisher

  I've been using Wacom tablets on Linux for quite some time, almost exclusively in Ubuntu, and in previous versions I've used xidump to track input values. I would use that information to put calibration settings in my xorg.conf file. However, in the most recent Ubuntu release, this command does not exist, and the package wacom-tools that previously installed it has now been removed. Is there a new method for calibrating Wacom pads under Linux? Should I have been using a different method all along for obtaining this information?

  Read the article

• Software restriction policies set in the registry don't update Local Group Policy

  - by Jon Rhoades

  The joys of a Samba domain... First off Domain Group policy can't be used until Samba 4 arrives. We need to setup Software Restriction Policies (SRPs) on most of the computers in our Samba domain and I would dearly like to automate this. (We are moving away from just disabling the Windows installer). The traditional way is to set SRPs using Local Group Policy (LGP) Computer Conf-Windows Settings-SRP but this involves visiting every machine as it can't be set using in NTConfig.pol. It is possible to attempt to create the SRPs directly in the registry: [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\Safer\CodeIdentifiers\262144\Paths\{30628f61-eb47-4d87-823b-6683a09eda87}] "LastModified"=hex(b):40,a2,94,09,b5,5d,ca,01 "Description"="" "SaferFlags"=dword:00000000 "ItemData"="C:\\location\\subfolder" SaferFlags DWORD seems to be what turns it on or off, but although this seems to work it does not update the Local Group Policy - SRPs still show as "No SRPs Defined". Where does the LGP store this setting - is it even in the registry and more importantly - Is there a cleverer way of setting up SRPs?

  Read the article

• Nginx + CodeIgniter + Invision power board rewrite rule probem.

  - by Ufuk

  Hello, I have a setup where I have a folder structre like: / /application /system /forum index.php My ngix configuration: if (!-f $request_filename) { rewrite ^/(.*)$ /index.php/$1 last; } location ~ /index.php { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; include /usr/local/nginx/conf/fastcgi_params; fastcgi_param SCRIPT_FILENAME /var/www/vhosts/mydomain.com/httpdocs/index.php; } This setup works correctly and redirects urls to correct controller of codeigniter yet it does also forward www.mydomain.com/forum to codeigniter, which eventually shows a 404 page of CodeIgniter. Does anyone know the correct configuration for my setups? Thank you.

  Read the article

• setting ulimit and ubuntu 8.04

  - by Wizzard

  Hi there, We have two ubuntu 8.04 servers. With the database server I set the table_cache to 1000 however when I restart mysql the status only shows 257 and the open files limit says 1024 I adjusted ulimit by doing ulimit -n 8192 and then restarting mysql; this seemed to do the tick however after a few hours I did ulimit -n and saw it had returned back to 1024 Bit of a worry. I edited the /etc/security/limits.conf and added mysql soft nofile 8192 mysql hard nofile 8192 then rebooted, no change. I then edited and change mysql to * rebooted, no change I then edited and changed it to one line * - nofile 8192 and rebooted, no change. cat /proc/sys/fs/file-max gives me 768730 sysctl fs.file-max gives me fs.file-max = 768730 I am at a bit of a loss to how I can set and keep the ulimit value set so I can increase the table cache properly on mysql.

  Read the article

• How do I make kdump use a permissible range of memory for the crash kernel?

  - by Philip Durbin

  I've read the Red Hat Knowledgebase article "How do I configure kexec/kdump on Red Hat Enterprise Linux 5?" at http://kbase.redhat.com/faq/docs/DOC-6039 and http://prefetch.net/blog/index.php/2009/07/06/using-kdump-to-get-core-files-on-fedora-and-centos-hosts/ The crashkernel=128M@16M kernel parameter works fine for me in a RHEL 6.0 beta VM, but not on the RHEL 5.5 hosts I've tried. dmesg shows me: Memory for crash kernel (0x0 to 0x0) notwithin permissible range disabling kdump Here's the line from grub.conf: kernel /vmlinuz-2.6.18-194.3.1.el5 ro root=/dev/md2 console=ttyS0,115200 panic=15 rhgb quiet crashkernel=128M@16M How do I make kdump use a permissible range of memory for the crash kernel?

  Read the article

• automysqlbackup not working weirdly on shared host

  - by KPL

  I'm on HostGator and I have not-root-level SSH access. I manually setup automysqlbackup in a /home/user/automysqlbackup folder. Created a file called runbackup in the same folder, chmod +x'ed it. The content : /home/user/automysqlbackup/automysqlbackup /home/user/automysqlbackup/myserver.conf Now, when I run ./runbackup from shell, no email is sent. I've setup a daily cron job. The crontab line reads - 24 06 * * * /home/user/automysqlbackup/runbackup When the crontab is run, I do get an email, but, the subject is WARNING: Error Reported - MySQL Backup Log and SQL Files for localhost - 012-03-19_06h24m The email does have an attachment, but it just has the SQL for creating tables. No data in the several rows at all. I don't know what wrong I'm doing and this is freaking me out! I tried writing a custom script as well, using this guide, but mutt doesn't send email, then. The OS used by HostGator is CentOS.

  Read the article

• WebDAV, SVN, Apache2 on OS X 10.6.2

  - by David

  Hi there, I'm trying to configure SVN server on OS X 10.6.2 via Apache2. Whenever I enable the module in Wev - Settings - Services then try accessing the site, it fails. So I attempted an apachectl configtest and I'm getting a crazy amount of errors: httpd: Syntax error on line 132 of /private/etc/apache2/httpd.conf: Cannot load /usr/libexec/apache2/mod_dav_fs.so into server: dlopen(/usr/libexec/apache2/mod_dav_fs.so, 10): Symbol not found: _dav_add_response\n Referenced from: /usr/libexec/apache2/mode_dev_fs.so\n Expected in: flat namespace\n in /usr/livexec/apache2/mod_dav_fs.so When I attempt disabling the related services and enabling then one by one (dav_fs_module, dav_module, dav_svn_module and authz_svn_mod each seems to fail. What the heck. :-( Thanks in advance, Dave

  Read the article

• Cyrus IMAP: Unable to connect to remote host: Connection refused

  - by Nick

  I'm working on setting up a Cyrus 2.2 IMAP server on Ubuntu Server 9.04. If I telnet from the server itself: # telnet localhost imap I get: * OK IMAP Cyrus IMAP4 v2.2.13-Debian-2.2.13-14ubuntu3 server ready Which is what I should be seeing. If I try from another machine on the network: telnet 192.168.5.122 imap I get: telnet: Unable to connect to remote host: Connection refused UPDATE: From /etc/cyrus.conf # add or remove based on preferences imap cmd="imapd -U 30" listen="imap" prefork=0 maxchild=100 imaps cmd="imapd -s -U 30" listen="imaps" prefork=0 maxchild=100 #pop3 cmd="pop3d -U 30" listen="pop3" prefork=0 maxchild=50 #pop3s cmd="pop3d -s -U 30" listen="pop3s" prefork=0 maxchild=50 #nntp cmd="nntpd -U 30" listen="nntp" prefork=0 maxchild=100 #nntps cmd="nntpd -s -U 30" listen="nntps" prefork=0 maxchild=100 To the best of my knowledge, there is no firewall running on the box. I've tried restarting the saslauthd and cyrus2.2 daemons, with no effect. What else can I try?

  Read the article

• Centos Virtual host loading default page

  - by ntechi

  I have asked a question which was related to this but not same, I have a centos VPS, which has two wordpress websites, one is mbas.co.in and another is onlinemba123.com, now for virtual hosting using just ONE IP ADDRESS, first I started mbas.co.in, which is working fine, when I added onlinemba123.com then, it is loading default Centos page instead of my website, and I am just testing my onlinemba123 website, I haven't configured DNS for it, I am testing it through editing my PC's hosts file, My website folder names are also same as in the conf file below Now my question is how can I load my website instead of Default page, is my virtual host config fine? My virtual host config: NameVirtualHost *:80 <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /var/www/html/www.mbas.co.in ServerName mbas.co.in ErrorLog logs/mbas.co.in-error_log CustomLog logs/mbas.co.in-access_log common </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /var/www/html/www.onlinemba123.com ServerName www.onlinemba123.com ErrorLog logs/onlinemba123-error_log CustomLog logs/onlinemba123-access_log common </VirtualHost> My computers host file is: xx.xxx.xxx.xxx www.onlinemba123.com

  Read the article

• Tomcat 6 IP restrictions

  - by KB22

  I need to protect a certain folder within a web application of mine from access from outside of an defined IP range. With O'Reilly's Tomcat Tips I figured that: <Context path="/path/to/secret_files" ...> <Valve className="org.apache.catalina.valves.RemoteAddrValve" allow="127.0.0.1" deny=""/> </Context> Is the way to go? I'm not that much into tomcat configuration so I'm dazzled a little as to where to put these restrictions. Do I put this Within my web.xml or is this a thing I need to add to some general tomcat conf file?

  Read the article

• Disable ProxyPass rules within a virtual host on apache 2

  - by chinto

  I have a global proxypass rule in httpd.conf rules at global level ProxyPass /test/css http://myserver:7788/test/css ProxyPassReverse /test/css http://myserver:7788/test/css and I have a virtual host Listen localhost:7788 NameVirtualHost localhost:7788 <VirtualHost localhost:7788> Alias /test/css/ "C:/jboss/server/default/deploy/test.ear/test-web-app.war/css/" </VirtualHost> I would like to disable all global proxypass rules applying in this virtual host? NoProxy doesn't seem to work. (The reason I would like to do this is I have below global rules which create a 502 proxy loop if applied within this virtual host #pass all requests to application server ProxyPass /test http://localhost:8080/test ProxyPassReverse /test http://localhost:8080/test ) What I'm trying to do is, serve all static content (like css) using apache, while still proxying all the rest of requests to the application server.

  Read the article

• Cannot install xdebug

  - by Nathan Mann

  I'm getting a large number of undefined references when using $ld xdebug.so I have added the "zend_extension="/bla/xdebug.so"" to the conf for apache and it is giving me a config test failed because it cannot find the file. The file has been chown'd to www-data, so I do not believe it is a permissions error. I have run the wizard at xdebug.org/wizard.php to make sure the version would be correct, I updated to the version it recommended with an install from source and still receive the same error with apache and same output from $ld. I originally installed xdebug with: $apt-get install php5-xdebug And have also tried with: $pecl install xdebug

  Read the article

• What's required to configure Ubuntu to use a specific DNS server?

  - by ks78

  I've setup two Amazon EC2 instances, both running Ubuntu Server. One is configured as a DNS server running bind9, which will be used to allow EC2 instances to communicate with each other based on hostname rather than IP, since their private IPs may change. I think I have the DNS server setup correctly. I want to use the second EC2 instance to test the DNS server. Using Webmin, I've added the DNS server's private IP to the client's DNS Servers list and added the domain to the Search Domains list. I did have to edit /etc/dhcp3/dhclint.conf to make my changes stick. After reboot, I expected I'd be able to ping or nslookup the DNS server from the test client, but it can't seem to find the server. Is there something I'm missing? What's required to configure an Ubuntu client to use a DNS server? I just want to make sure I'm not missing something before I assume the server's the problem.

  Read the article

• how change nginx temp & log folder or disable logging completely

  - by Ehsan Khodarahmi

  I'm running nginx 1.3.5 under windows seven, I need to execute nginx directly from a read-only media (CD or DVD), but when I want to run it, it fails with this error: nginx: [alert] could not open error log file: CreateFile() "logs/error.log" fail ed (5: Access is denied) 2012/08/28 13:52:46 [emerg] 5604#2864: CreateDirectory() "J:\nginx-1.3.5/temp/client_body_temp" failed (5: Access is denied) where J is my CD-ROM drive letter. I've changed nginx.conf to disable logging completely, but seems anyway it still tries to build a file named 'error.log' in '/logs' folder & some extra temporary contents in '/temp' folder at the startup, so I want to change 'logs' & 'temp' directory path to windows temp folder (%temp%), but I dont have any idea that how can I do it. Also I want to know why nginx still creates 'logs/error.log' after disableing error logging ?

  Read the article

• Set Error-Pages for all Applications in Tomcat

  - by user38511

  I'm trying to set up custom error pages in tomcat 6, because I don't want the default ones to show up. My error pages are static html, no jsp or anything dynamic. I know how to do this through the web.xml in each application but I'd prefere to setup the error pages only once for the entire server. I tried to add the following fragment to the global web.xml (in conf), but no matter what I add under location, it does not show. <error-page> <error-code>404</error-code> <location>/404.html</location> </error-page> What do I need to do to gobally define custom error pages? Thanks!

  Read the article

• DRBD Not syncing between my nodes

  - by Mike Curry

  Some version info: Operating system is Ubuntu 11.10, on EC2, kernel is 3.0.0-16-virtual and the application info is: Version: 8.3.11 (api:88) GIT-hash: 0de839cee13a4160eed6037c4bddd066645e23c5 build by buildd@allspice, 2011-07-05 19:51:07 Getting some strange errors in dmesg (seen below) as well, there is no replication happening. I have made my first node primary and its showing: drbd driver loaded OK; device status: version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 m:res cs ro ds p mounted fstype 0:r0 StandAlone Primary/Unknown UpToDate/DUnknown r----s ext3 my secondary node is showing: drbd driver loaded OK; device status: version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 m:res cs ro ds p mounted fstype 0:r0 StandAlone Secondary/Unknown Inconsistent/DUnknown r----s Showing /proc/drbd on the master shows: version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 0: cs:StandAlone ro:Primary/Unknown ds:UpToDate/DUnknown r----s ns:0 nr:0 dw:4 dr:1073 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:262135964 Showing /proc/drbd on the slave shows that there is nothing being transfered... version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 0: cs:StandAlone ro:Secondary/Unknown ds:Inconsistent/DUnknown r----s ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:262135964 Here is my config... resource r0 { protocol C; startup { wfc-timeout 15; degr-wfc-timeout 60; } net { cram-hmac-alg sha1; shared-secret "test123; } on drbd01 { device /dev/drbd0; disk /dev/xvdm; address 23.XX.XX.XX:7788; # blocked out ip meta-disk internal; } on drbd02 { device /dev/drbd0; disk /dev/xvdm; address 184.XX.XX.XX:7788; #blocked out ip meta-disk internal; } } I have run the following on the master: sudo drbdadm -- --overwrite-data-of-peer primary all There is no firewall between the systems. Here is the dmesg with some errors: [2285172.969955] drbd: initialized. Version: 8.3.11 (api:88/proto:86-96) [2285172.969960] drbd: srcversion: DA5A13F16DE6553FC7CE9B2 [2285172.969962] drbd: registered as block device major 147 [2285172.969965] drbd: minor_table @ 0xffff88000276ea00 [2285173.000952] block drbd0: Starting worker thread (from drbdsetup [1300]) [2285173.003971] block drbd0: disk( Diskless -> Attaching ) [2285173.006150] block drbd0: No usable activity log found. [2285173.006154] block drbd0: Method to ensure write ordering: flush [2285173.006158] block drbd0: max BIO size = 4096 [2285173.006165] block drbd0: drbd_bm_resize called with capacity == 524271928 [2285173.008512] block drbd0: resync bitmap: bits=65533991 words=1023969 pages=2000 [2285173.008518] block drbd0: size = 250 GB (262135964 KB) [2285173.079566] block drbd0: bitmap READ of 2000 pages took 17 jiffies [2285173.081189] block drbd0: recounting of set bits took additional 1 jiffies [2285173.081194] block drbd0: 250 GB (65533991 bits) marked out-of-sync by on disk bit-map. [2285173.081203] block drbd0: Suspended AL updates [2285173.081210] block drbd0: disk( Attaching -> UpToDate ) [2285173.081214] block drbd0: attached to UUIDs 1C1291D39584C1D1:0000000000000004:0000000000000000:0000000000000000 [2285173.095016] block drbd0: conn( StandAlone -> Unconnected ) [2285173.095046] block drbd0: Starting receiver thread (from drbd0_worker [1301]) [2285173.099297] block drbd0: receiver (re)started [2285173.099304] block drbd0: conn( Unconnected -> WFConnection ) [2285173.099330] block drbd0: bind before connect failed, err = -99 [2285173.099346] block drbd0: conn( WFConnection -> Disconnecting ) [2285173.295788] block drbd0: Discarding network configuration. [2285173.295815] block drbd0: Connection closed [2285173.295826] block drbd0: conn( Disconnecting -> StandAlone ) [2285173.295840] block drbd0: receiver terminated [2285173.295844] block drbd0: Terminating drbd0_receiver Edit: Reading some other similar issues, it was suggested to do a 'drbdadm dump all', so I figured it couldn't hurt. ubuntu@drbd01:~$ drbdadm dump all /etc/drbd.conf:19: in resource r0, on drbd01: IP 23.XX.XX.XX not found on this host. and on slave: root@drbd02:~# drbdadm dump all /etc/drbd.conf:25: in resource r0, on drbd02: IP 184.XX.XX.XX not found on this host. Strange it doesn't find its own ip, however, this is an Amazon EC2 system using an elastic IP... here are my ipconfigs for both... master: ubuntu@drbd01:~$ ifconfig eth0 Link encap:Ethernet HWaddr 22:00:0a:1c:27:11 inet addr:10.28.39.17 Bcast:10.28.39.63 Mask:255.255.255.192 inet6 addr: fe80::2000:aff:fe1c:2711/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1569 errors:0 dropped:0 overruns:0 frame:0 TX packets:1169 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:124409 (124.4 KB) TX bytes:213601 (213.6 KB) Interrupt:26 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) slave: root@drbd02:~# ifconfig eth0 Link encap:Ethernet HWaddr 12:31:3f:00:14:9d inet addr:10.160.27.107 Bcast:10.160.27.255 Mask:255.255.254.0 inet6 addr: fe80::1031:3fff:fe00:149d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:915 errors:0 dropped:0 overruns:0 frame:0 TX packets:774 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:75381 (75.3 KB) TX bytes:109673 (109.6 KB) Interrupt:26 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

  Read the article

< Previous Page | 103 104 105 106 107 108 109 110 111 112 113 114  | Next Page >