connect - Page 107 - Developer IT

Laptop connects to other network but not to my home wireless

- by Nilesh

My home network's wireless SSID is say "XYZ" I also have an ethernet wire from the same router. I have two laptops A and B Earlier both A and B were able to connect to my home internet through the ethernet and wireless. Suddenly, the laptop B can no longer connect to XYZ or through ethernet. When I do plug the wire, i get the connection icon all green but when I try to access any web page it errors out (page not found) But strangely laptop B connects to my neighbours wireless SSID "ABC". I have also tested laptop B with other networks and it connects fine. Laptop A and many other devices still connect fine with my home wireless "XYZ" Strange thing is when my laptop B connects wireless through XYz, it gets the IP address but then none of the browsers (chrome,firefox, IE) can show any web pages. What settings should I be checking on laptop B that is preventing it to connect to my home internet. Thank you

Read the article

Name of my sql server instance from outside the network

- by Michel

Hi, normally i connect to my sql server instance from my local computer, and then the server name to connect to is the name of my laptop. So i can connect to server instance 'MichelLaptop' But now i'm trying to connect to my server from outside my network, and the first thing i wonder is: what is the name of the instance? i've made a redirect to my local machine in the DNS of my domain, so i said (this is not the real data) testsql.mydomain.com goes to 190.191.192.193 and when i ping testsql.mydomain.com, i get a response from 190.191.192.193 But what then is the server name?

Read the article

A router that supports connecting with 2 different wifi networks

- by Allan Deamon

I Have the following setup in one place: We have a small local ISP through wireless. I have a external parabolic antenna, connected to a external usb wifi radio, connected through USB to a desktop old PC. The pc connects do the ISP wiki network, then do a Dial Up (PPPoE) connection through the this wifi setup. This will expand with others mobiles devices to be used. When I need, I take my home wireless router and connect though Ethernet in the PC, which is shares the internet. The problem is that the PC must be always ON and working. I would like to buy a wireless router which could be an AP to the mobile devices, notebooks, etc, as also could connect to the ISP Wifi/PPPoE network. So, this device must: Have one radio with detachable antenna to connect to the external antenna. It must connect as client to a network and then dial up the PPP Have another radio serving as AP (infrastructure) to the local place This can't be very expensive. I found a candidate: ( http://www.tp-link.com/en/products/details/?categoryid=1682&model=TL-WR2543ND ) It have 3 deatachable antennas, working with dual band. Officially, his firmware doesn't support it. My supposition: If internally there is 3 or 2 distinct wlan ports (like wlan0, wlan1), and there is support, i could use a OpenWRT, DD-WRT or Tomato to make this works. It also have 1 USB port, which I cold use to connect my actual USB Wifi card on it instead to the old PC. Another alternative, is a router that can do this out of box, with the original firmware. But I don't think this is a easy thing to find.

Read the article

Mysql connections hanging in login state

- by Mark Rose

Read the article

Wired and wireless network file sharing

- by Megan

I have connected my Internet to a buffalo air station router and a swtich. Computers and Laptops on this network connect to the Internet wired and wirelessly. I would like to share files locally on this network but I can't access the laptop's which connect wirelessly. I have shared folders on each computer but I would like to know if local file sharing is possible as all the computers utimately connect to the same router. All computers are running Windows 7.

Read the article

Connecting to Windows 7 from fedora is slow

- by user44212

I use rdesktop command to connect to windows 7 machine remotely but I get a very slow reponse when I try and connent to it. The command that I used to connect to it is rdesktop -4 -C -x -b : -g 100% 192.168.1.100. I have tried using the rdesktop command to connect to the console port as well but the result is the same. I have even tried using the Terminal server client application the result is the same. I am trying to connect from fedora 14 machine to windows 7 professional is there any tweaking that needs to be done to overcome this issue either on fedora or Windows 7.

Read the article

'The rpc server is unavailable' or 'access is denied' error when using Remote desktop Services Manager on Windows 7 (but mstsc.exe works!)

- by tbone

I am trying to connect to a Windows XP workstation from a Windows 7 Ultimate workstation using Remote Desktop Services Manager. I am able to do a Remote Desktop (mstsc.exe) session from the Win7 machine to the WinXP machine with no problem at all. When running the Remote Desktops Admin (tsmmc.msc) too on a Windows XP box, I can also connect with no problem. However, when I use the new Remote Desktop Services Manager on Windows 7 and try to connect, I get the error: "The rpc server is unavailable" What could cause this? Has there been some fundamental change in Remote Desktop Services Manager, does it connect in a different way somehow? Update #1 Turned off firewall on the Windows XP box and the "The rpc server is unavailable" error went away; so RDSM seems to be using an entirely new port/connection/service compared to mstsc.exe or the old Remote Desktops Admin tool. Now... after disabling the firewall, I get a new error: Access is Denied. After doing some googling, I found some articles discussing this; basically, the error is very misleading - the actual problem is, if either side of the connection has dual monitors, and they are not both Win7 Ultimate, then you cannot connect using Remote Desktop Services Manager...the reason is, by default it uses the /multimon switch, and this switch requires a certain level of Windows license - and, there seems to be no way of changing this default (if anyone knows of a way to change this default, please post an answer or comment!). Nice going Microsoft. http://social.technet.microsoft.com/Forums/en-US/windowsserver2008r2rds/thread/4d06278f-e0f4-4f8e-a8e1-3697ee967ef4 http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/Windows_7/Q_26225743.html

Read the article

How to test Laptop NIC's throughput using a router and PC - without be bounded?

- by 0x90

My setup includes: Cisco router An i-7 PC running windows A laptop with high speed wifi nic, which I want to check its throughput. I would like to run an FTP server on the PC. hook the router over cables to the PC. I would like to have the PC create its own subnet accessible via the cisco router that would be hooked directly to the PC's nic. From the laptop I want to connect via wifi to the PC's wireless router and connect to the ftp server on the PC. is it possible? how do i connect the router to the PC nic and make it broadcast a subnet via wifi for my laptop to connect to? how do i configure an FTP server to operate only on this subnet?

Read the article

Connecting with SMB from Mac to Windows server

- by Jérôme

I'm trying to connect from my Mac to a directory on a Windows server. Here is what I'm doing from the finder : menu Go->connect to server->smb://srv-fichiers1/Personnel/conujer I get an error (error code -36). But, from the finder window, if I click on Shared->All->srv-fichier1->Personnel->conujer, I have access to the directory. I don't understand why I cannot connect straight to conujer.

Read the article

Strange RDP / Remote Desktop problem

- by John Landheer

I'll try to be as specific as I can be: Server is running SBS 2008 R2 (with all updates) Server is connected to the internet Server has 2 NIC's, one is disabled Server is running RDP Service (accessible directly from the internet, I know, not as secure as it should be) Computers A and B are on the same local net. Computers A and B are both Windows 7. Users X and Y are both admins on the server Computer A can connect as user X to the server with mstsc Computer A can connect as user Y to the server with mstsc Computer B can connect as user X to the server with mstsc computer B CANNOT connect as user Y to the server with mstsc! The last point is the problem, I get an authentication error. This used to work flawlessly for the last year. The server and desktops have been rebooted. I find it very strange....

Read the article

Curious enigma of a network cable / connection / quality

- by Foo Bar

So, the situation is like this: I'm renting an apartment in a large house and I'm sharing internet with the landlord who lives downstairs. The internet is (in my best guess) optical 20/20Mbit. I don't know how it's all wired in his flat (haven't been there / seen it). Anyway, in my flat comes a cable which seems to be connected directly to the optic to ethernet router (and the password is the default one, so I have access, he he). There was a switch connected to that and to wires that go around the flat, and the wiring is terrible. It's even mixing phone and ethernet, and from what I see some cables are even interconnected!? Anyways, this cable that comes to my flat is very short. I can barely connect my computer on it, but if I do, I seem to get decent speed / performance. Not great, but decent. If, however, I connect switch to it (tried 2 different switches and a wifi switch) it's all blinking but I can't even connect to 192.168.1.1 (the router). DHCP fails, ping is losing 80-100% of replies. So I connected this cable directly to the other cable which goes to my work room, with a connector that has two female jacks and no electronics. Now when I connect my computer in my room, again, the performance is decent. When I connect WRT54GL (with tomato, DHCP disabled) to it and I plug a cable in this WRT and to my computer... the performance is gone. Download seems okay on Speedtest, but upload is .2Mbps and it's connecting forever. So what kind cable troll am I having here? Any ideas?

Read the article

force connection using USB adapter

- by James

Hi all I am new to Linux, so even though this is probably a simple problem it remains unsolved after more then 3 hours of googling :-( I run running ubuntu 10.04 LTS on an Acer Aspire 5520G . the laptop has a wireless adapter, but since I wanted better range I got an Edimax EW-7711USN USB adapter. now , when running ifconfig I am able to see both adapters where as the laptop native adapter is listed as wlan0 and the usb adapter is listed as wlan1. but listing available networks from the wireless network applet , all the connection are listed under wlan0 , the usb adapter is costencly listed as disconnected. this is what I have been trying to do so far 1) ifconfig wlan0 down - I got disconnected from the net but still was not able to get the usb to connect 2) used the wireless connection dialog to connect to a hidden network with the usb adapter - I was able to connect to the network but with no Internet access 3) disable wireless using the laptop function button - both wireless adapters where disabled can anyone suggest a way to connect to to the wireless network using the USB adapter rather then the built in one ? Thanks

Read the article

What is an Acer Converter Port?

- by ShadowHero

What is this port "Acer Converter Port"? Very little information can be found on the internet. It's basically the same as miniDP? Can I connect a monitor like Dell U2713H on this one? EDIT From this page: http://acer.custhelp.com/app/answers/detail/a_id/30837/~/frequently-asked-questions-on-the-aspire-r7-series 9. Can I connect a DisplayPort monitor to the Acer Converter Port? The Acer Converter Port uses the same physical port as a Mini DisplayPort, but is designed to connect to an Acer proprietary cable. If you connect a DisplayPort monitor, Acer cannot guarantee the functionality of the monitor. No damage should occur to either monitor or notebook by connecting a Mini DisplayPort cable. So, the question is, can someone confirm this will work for sure?

Read the article

My Laptop (HP/Compaq 2510p) running ubuntu 10.04 LTS keeps losing the WLAN connection.

- by Ernelli

I am using Wicd and can successfully connect to my ADSL router (Thomson TG 787) using WPA PSK. But with regular interval I lose the ability to connect to Internet. I can ping the GW and can actually ping servers on the Internet but not connect to them using HTTP (Tested with both Firefox and wget). I would suspect the router unless for the fact that the problem does not show up when running Windows XP on the same computer and also, when the problem arises, a simple disconnect/connect in Wicd solves the problem, which does not involve the router (Except for the DHCP request). I have searched Ubuntu forums without luck, most problems described relate to specific network drivers or other problems. Does anyone have the same experience with Linux/Ubuntu and WLAN?

Read the article

Any consumer routers with Outgoing VPN support?

- by Brian Lacy

When I'm working at home, I need to be able to connect to three different outgoing VPNs, two of which happen to use the same internal IP addressing schemes (192.168.0.*). I also need a static address for my VirtualBox VM so I can connect to my testing web server. Are there any routers which will allow me to connect to multiple outgoing VPNs and assign different internal IP addresses through NAT? Is such a thing even possible, or are there alternate solutions available? Thanks!

Read the article

Error when sending mail to an external mail server from Postfix on CentOS

- by yankitwizzy

I just installed Postfix. i have not yet done any configuration on it. Each time I try to use it to sendmail from another application, it keeps telling me that COnnection was refused from the ip I want to connect to. This is the error I get [root@localhost /]# telnet mail.abuse.org Trying 69.43.160.153... telnet: connect to address 69.43.160.153: Connection refused telnet: Unable to connect to remote host: Connection refused COuld someone please help me the problem

Read the article

Howto dianostic problem in MySQL Cluster?

- by maj

Hi, I have set up a MySQL cluster following exactly this howto. Page 1 is completed, but the problem I can see the nodes in ndb_mgm for a little while, and then I get ndb_mgm> show; Cluster Configuration --------------------- [ndbd(NDB)] 2 node(s) id=2 (not connected, accepting connect from 192.168.0.101) id=3 (not connected, accepting connect from 192.168.0.102) [ndb_mgmd(MGM)] 1 node(s) id=1 @192.168.0.103 (Version: 5.1.45) [mysqld(API)] 2 node(s) id=4 (not connected, accepting connect from any host) id=5 (not connected, accepting connect from any host) ndb_mgm> So the questions is; How do I diagnostic this problem? Does there exist log files I can look in?

Read the article

putty ssh client become not responding frequently in windows 7

- by Sankaran

with celeron processor and 512 MB ram windows 7 takes too much time even to open a folder in windows explorer. I connect to internet with GPRS modem. When I tried to connect with remote linux machine with putty ssh client. The problem is the putty becomes Not responding in 2 or 3 minutes. I've to connect again and putty goes Not responding again. When i tried in Safe mode with networking, GPRS modem is not even detected. the modem is USB data card. Is it possible load USB drive in safe mode of windows 7 or any other possibility to connect with remote machine via ssh

Read the article

WIFI connection not working

- by chris verwey

We have a wireless network that is set to secure, it does show as unsecure on my laptop, and desktop connect to router but no internet access. other computers on the network require password to connect to router and get internet access. Iphone and Ipads connect using password and also have internet access, what can I do to fix it. Laptop = dell e6410 Router = netgear The laptop work on other wireless networks without any problem

Read the article

Use vmconnect from another AD domain

- by user1459015

I try to connect remotly to the KVM (console) of an Hyper-V Virtual Machine using vmconnect.exe but I'm dealing with some kind of a problem : When I connect from a computer within the same AD of my Hyper-V Host, everything work fine but when I try to connect from a computer not within the same AD, wmconnect say that my RCP services is not running on the host The problem is that it doesn't ask me for any credentials and so, i can't authenticate in the AD Does someone have any clues ?

Read the article

OpenVPN: Single certificate authority, multiple VPNs

- by darwish

The company in which I work has a single site (I'll refer it as "Site A"). There are several private networks within site A. We have a running instance of OpenVPN which allows some employees to connect to one of the private networks in site A. We're planning to extend our facilities to another site (which I'll refer as "Site B") and we wish to connect both sites using OpenVPN. The VPN which will connect sites A to B will be a trunk link, meaning it will have access to all networks. If we use the same certificate authority for both VPN servers, this will allow the employees, which can only to one of the private networks within site A, to connect to the site-to-site link, which will give them access to all networks. Off course this is undesirable. Using 2 different certificate authorities seems like the obvious solution, but it doesn't feel right. I wounder if there's a way to maintain permission control within a single certificate authority.

Read the article

Why am I unable to telnet to a local port that has a listening service?

- by Skip Huffman

I suspect this is either a very simple question, or a very complex one. I have a headless server running ubuntu 10.04 that I can ssh into. I have full root access to the system. I am trying to set up an ssh tunnel to allow me to vnc to the system (but that isn't my question. I have vnc running on port 5903, here is the netstat output for that: Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:5903 0.0.0.0:* LISTEN 7173/Xtightvnc tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 465/sshd But when I try to telnet to that port, from within the same system and login, I get unable to connect errors # telnet localhost 5903 Trying ::1... Trying 127.0.0.1... telnet: Unable to connect to remote host: Connection timed out I am able to telnet to port 22 (as a verification) ~# telnet localhost 22 Trying ::1... Connected to localhost. Escape character is '^]'. SSH-2.0-OpenSSH_5.3p1 Debian-3ubuntu7 I have tried to open up any possible ports using ufw (probably clumsy fashion) # ufw status numbered Status: active To Action From -- ------ ---- [ 1] 5903 ALLOW IN Anywhere [ 2] 22 ALLOW IN Anywhere What else might be blocking this connection locally? Thank you, Edit: The only reference to port 5903 in iptable -L -n is this: Chain ufw-user-input (1 references) target prot opt source destination ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:5903 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:5903 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:22 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:8080 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:8080 I can post the whole output if that will be useful. hosts.allow and hosts.deny both contain only comments. Re-Edit: Some other questions pointed me to nmap, so I ran a portscan through that utility: # nmap -v -sT localhost -p1-65535 Starting Nmap 5.00 ( http://nmap.org ) at 2011-11-09 09:58 PST NSE: Loaded 0 scripts for scanning. Warning: Hostname localhost resolves to 2 IPs. Using 127.0.0.1. Initiating Connect Scan at 09:58 Scanning localhost (127.0.0.1) [65535 ports] Discovered open port 22/tcp on 127.0.0.1 Connect Scan Timing: About 18.56% done; ETC: 10:01 (0:02:16 remaining) Connect Scan Timing: About 44.35% done; ETC: 10:00 (0:01:17 remaining) Completed Connect Scan at 10:00, 112.36s elapsed (65535 total ports) Host localhost (127.0.0.1) is up (0.00s latency). Interesting ports on localhost (127.0.0.1): Not shown: 65533 filtered ports PORT STATE SERVICE 22/tcp open ssh 80/tcp closed http Read data files from: /usr/share/nmap Nmap done: 1 IP address (1 host up) scanned in 112.43 seconds Raw packets sent: 0 (0B) | Rcvd: 0 (0B) I think this shows that 5903 is blocked somehow. Which I pretty much knew. The question remains what is blocking it and how to modify. Re-re-edit: To check Paul Lathrop's suggested answer, I first verified my ip address with ifconfig: eth0 Link encap:Ethernet HWaddr 02:16:3e:42:28:8f inet addr:10.0.10.3 Bcast:10.0.10.255 Mask:255.255.255.0 Then tried to telnet to 5903 from that address: # telnet 10.0.10.3 5903 Trying 10.0.10.3... telnet: Unable to connect to remote host: Connection timed out No luck. Re-re-re-re-edit: Ok, I think I have isolated it a bit to vncserver, not the firewall, darn it. I shut off vncserver and had netcat listen on port 5903. My vnc client then was able to establish a connnection and sit and wait for a response. Looks like I should be chasing a vnc problem. At least that is progress Thanks for the help

Read the article

Connecting to network device behind NAT from local LAN using the external port and IP

- by lumbric

I noticed at several different LANs connected to the Internet through a NAT the following phenomena. There is a server in the LAN and there is a port forwarding to reach this server also from outside the LAN through the NAT. E.g. consider a LAN with the address 192.168.0.* and a SSH server at 192.168.0.2 with port 22 and a forwarding from port 2222 at the NAT 192.168.0.1 to 192.168.0.2:22. If the NAT's external IP is 44.33.22.11, one can connect to the SSH server through 44.33.22.11:2222. Surprisingly this works only from outside the LAN. If one tries to connect to 44.33.22.11:2222 from behind the NAT, there is no answer. Of course one could simply use 192.168.0.2:22, but often it is simpler to use the external IP. The typical use case for me is the configuration on a laptop computer. Usually the user uses any arbitrary Internet connection to connect to his home or office server, but sometimes he will use also the LAN to connect to it and it would be annoying to have to different configurations or bookmarks. Why does it fail to connect from inside the LAN? Is there any good work around?

Read the article

Iptables - Open Port Only for one Server IP (allow connections from a specific range)

- by user1015314

My server has multiple IPs, 1.1.1.1 1.1.1.2 and i have a service which listens to a port e.g. 88 Now i want, when somebody from outside, wants to connect to the port, that he can only connect, to that port, if he connects to the ip 1.1.1.2:88 but if he tries to connect to 1.1.1.1:88 it should not react and it should look like that it dont exists and drops all connections. Ok, than i need for 1.1.1.2:88 that only allows a specific ip range outside connecters. for example only 9.*.*.* can connect to that port and ip. I'm using Centos. Thank you for your help.

Read the article

NetworkManager detects no networks with a RTL8188CE

- by Cormac O'Brien

I'm on a 2011 Lenovo Thinkpad T420i with a Realtek RTL8188CE WiFi adapter. Here's the scenario: I pop in the Ubuntu LiveCD to install. Laptop detects all networks in range, I connect to my home network, internet working great. Once Ubuntu finishes installing, the home network I am connected to is the only one which appears in the applet list. Upon restarting or waking from suspend, NetworkManager does not detect any networks – it simply displays "Disconnected" under the Wireless Network section of the menu. I am able to connect to my home network by using the "Connect to Hidden Wireless Network" option and it works immediately. I have yet to test if this works with other SSIDs. I have tried reinstalling the entire OS as well as NetworkManager and my wireless drivers. For hardware info, I ran: cormac@cormac-T420:~$ sudo lshw -c network Here is the output for my wireless card: *-network description: Wireless interface product: RTL8188CE 802.11b/g/n WiFi Adapter vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: d0:df:9a:08:73:50 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rtl8192ce driverversion=3.2.0-26-generic firmware=N/A ip=192.168.1.138 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 ioport:5000(size=256) memory:f2500000-f2503fff I can provide more information if required. This was not a problem in Natty or Oneiric. I hope this can be fixed, I don't want to have to ask for an SSID wherever I need to connect.

Search Results

Search found 14951 results on 599 pages for 'connect'.

Page 107/599 | < Previous Page | 103 104 105 106 107 108 109 110 111 112 113 114 | Next Page >

- by Nilesh

- by Michel

- by Allan Deamon

- by Mark Rose

- by Megan

- by user44212

- by tbone

- by 0x90

- by Jérôme

- by John Landheer

- by Foo Bar

- by James

- by ShadowHero

- by Ernelli

- by Brian Lacy

- by yankitwizzy

- by maj

- by Sankaran

- by chris verwey

- by user1459015

- by darwish

- by Skip Huffman

- by lumbric

- by user1015314

- by Cormac O'Brien

< Previous Page | 103 104 105 106 107 108 109 110 111 112 113 114 | Next Page >