Search Results

Search found 14435 results on 578 pages for 'disk usage'.

Page 107/578 | < Previous Page | 103 104 105 106 107 108 109 110 111 112 113 114  | Next Page >

  • New SSD, is the MBR broken? DISK BOOT FAILURE

    - by Shevek
    I've been running Windows 7 on a WD 500gb SATA single drive, single partition setup for some time with no issues. I've just installed a new Kingston V Series 64gb SSD and performed a clean install of Win7 to it, deleting the partitions on the 500gb and using that as a data drive. All was well for a few reboots but then I started to get "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER" messages. If I put the Win7 install DVD back in the drive it boots fine. Tried a clean install again, after replacing SATA cables and swapping SATA ports, with a complete partition wipe of both drives. Again, rebooted fine a few times then back with the "DISK BOOT FAILURE" error. Looked on the web and found some discussions about it so I then started from scratch again. This time I wiped the MBR on both drives using MBRWork, disconnected the 500gb and reinstalled to the SSD. Removed the install DVD and installed all the drivers which involved many reboots, all with no problem. To make sure I also did a few cold boots as well. Reconnected the 500gb, initialised, partitioned and formatted it. Copied data to it and did some more reboots and shutdowns. All was ok. Then out of the blue comes another "DISK BOOT FAILURE" and again, if the Win7 install DVD is in the drive it boots fine. So, is the SSD a bad'un? TIA UPDATE: It was a BIOS issue! I found a hidden away option for HDD boot order, which was separate from the usual HDD/CDRom/FDD boot order option. The WD was set to boot before the SSD... Swapped them round and all is well. Still don't understand how it worked at first though... Thanks Solaris

    Read the article

  • The Connected Company: WebCenter Portal - Feedback - Analytics and Polls

    - by Michael Snow
    Evernote Export body, td { }Guest Post by: Mitchell Palski, Staff Sales Consultant The importance of connecting peers has been widely recognized and socialized as a critical component of employee intranets. Organizations are striving to provide mediums for sharing knowledge and improving awareness across their enterprise. Indirectly, the socialization of your enterprise should lead to cost savings and improved product/service quality. However, many times the direct effects of connecting an organization’s leadership with its employees are overlooked. Oracle WebCenter Portal can help you bridge that gap by gathering implicit and explicit feedback. Implicit Feedback Through Usage Analytics Analytics allows administrators to track and analyze WebCenter Portal traffic and usage. Analytics provides the following basic functionality: Usage Tracking Metrics: Analytics collects and reports metrics of common WebCenter Portal functions, including community and portlet traffic. Behavior Tracking: Analytics can be used to analyze WebCenter Portal metrics to determine usage patterns, such as page visit duration and usage over time. User Profile Correlation: Analytics can be used to correlate metric information with user profile information. Usage tracking reports can be viewed and filtered by user profile data such as country, company or title. Usage analytics help measure how users interact with website content – allowing your IT staff and business analysts to make informed decisions when planning development for your next intranet enhancement. For example: If users are not accessing your Announcements page and missing critical information that they need to be aware of, you may elect to use graphical links on the home page to direct more users to that page. As a result, the number of employee help-requests to HR decreases. If users are not accessing your News page to read recent articles, you may elect to stop spending as much time updating the page with new stories and cut costs in your communications department. You notice that there is a high volume of users accessing the Employee Dashboard page so your organization decides to continue making personalization enhancements to the page and investing in the Portal tool that most users are accessing. Usage analytics aren’t necessarily a new concept in the IT industry. What sets WebCenter Portal Analytics apart is: Reports are tailored for WebCenter specific tools Report can be easily added to a page as simple as a drag-and-drop Explicit Feedback Through Polls WebCenter Portal users can create, edit, take, and analyze online polls. With polls, you can survey your audience (such as their opinions and their experience level), check whether they can recall important information, and gather feedback and metrics. How many times have you been involved in a requirements discussion and someone has asked a question similar to “Well how do you know that no one likes our home page?” and the response is “Everyone says they hate it! That’s all anyone complains about.” No one has any measurable, quantifiable metric to gauge user satisfaction. Analytics measure usage, but your organization also needs to measure the quality of your portal as defined by the actual people that use it. With that information, your leadership can make informed decisions that will not only match usage patterns but also relate to employees on a personal level. The end result is a connection between employees and leadership that gives everyone in the organization a sense of ownership of their Portal rather than the feeling of development decisions being segregated to leadership only. Polls can be created and edited through the Poll Manager: Polls and View Poll Results can easily be added to a page through drag-and-drop. What did we learn? Being a “connected” company doesn’t just mean helping employees connect with each other horizontally across your enterprise. It also means connecting those employees to the decisions that affect their everyday activities. Through WebCenter Portal Usage Analytics and Polls, any decision that is made to remove a Portal page, update a Portal page, or develop new Portal functionality, can be justified by quantifiable metrics. Instead of fielding complaints and hearing that your employees don’t have a voice, give those employees a voice and listen!

    Read the article

  • is it necessary to format windows XP OS to do partitioning for Ubuntu, and how do I do it properly to then install Ubuntu from disk

    - by Brother V
    is it necessary to format windows XP OS to do partitioning for Ubuntu, and how do I do it properly to then install Ubuntu 10.10 from disk, and would it work from 10.10 to get 12.04 updates? Thank you all; for being, for being soooo forth-giving and for all you ever will to be. I endeavor to support and be of such torch-carrying also, and Am honored by the beautious examples of the people in these forums.

    Read the article

  • How do I share a complete XP disk so it can be seen from a Windows 7 system? (To move all files to a

    - by Ian Ringrose
    This should be easier! (both computers can see the internet etc so I know the network it’s self is working) I have a normal home network with a Windows XP machine on it and the new Windows 7 (64 bit) machine. So I can transfer the files to the new Windows 7 machine, I wish to share the complete disk (and all files) from the Windows XP machine and access them from the Windows 7 machine. Is there a step by step set of instructions for doing this anywhere? So fare I have: put both computers into the same workgroup put the windows 7 machine into work network mode so it can see the XP machine in the work group shared the XP disk as read only But when I try to access a lot of the folders on the XP disks, I am told I am not allowed to access them. (I was not asked for any passwords by the windows 7 machine when I accessed the XP machine. The XP machine just has its default account with no password set on it) The XP machine runs XP home and hence has "simple file shairing" turn on. So it seems that even if I create a admin account (with password) and connect with that account, it still comes in as "guest" on the XP machine. Chooseing to share the folder I want access to rather then the top of the disk drive seems to work, but is a pain as I need to share each user's folder with a different share name. If the new computer was not a laptop, I would just plug the hard disk from the old machine into it, but being a laptop I don't have that option.

    Read the article

  • How do I change file protections running XP on a disk from Windows Server?

    - by cdkMoose
    I had a Windows Server 2003 machine running at home, along with my desktop which I use for development. Server went belly up, but since my desktop is reasonably powerful, I figured I would move the disk from the file server (it was OK) into my XP machine to keep all of the files. Disk comes up fine and shows all of the files. I have been getting access denied errors when trying to work with some of the files. When I display attributes in Explorer, none of them are marked Read-Only. When I view properties on the directories, the Read-Only checkbox is not checked, but has a green background(which I thought meant mixed usage for files in the directory). When I click on the checkbox to clear it and click Apply, the disk does some work and all looks well. However, I continue to get the Access Denied errors, the files still don't show any Read-Only attribute and the directory properties shows the green background again on the Read-Only checkbox. I did check the box which says to apply the change to the folder and all files /subfilders under it. I am assuming that the issue relates to userids/permissions carried over from the Server install. So, why does it let me think I can change the attribute when I can't and how can I correct this problem so that the disk correctly recognizes the ids from XP?

    Read the article

  • How to backup/restore full-disk encryption ubuntu 11.10?

    - by ggc
    How to backup/restore full-disk encryption ubuntu 11.10? I would like to put the RAW encrypted file system and restore on another computer. Encryption Details: crypt setup via Ubuntu alterate CD Installer only thing unencrypted is /boot File systems setup: boot- j swap-swap everything else-ext 4 Any suggestions? I have considered backing up the file system stripped of encryption, but I would prefer to keep the os encrypted while transferring. Thanks for any help!

    Read the article

  • How to bring Paging File usage metric to zero?

    - by AngryHacker
    I am trying to tune a SQL Server. Per Brent Ozar's Performance Tuning Video, he says the PerfMon's Paging File:%Usage should be zero or ridiculously close to it. The average metric on my box is around 1.341% The box has 18 GB of RAM, the SQL Server is off, the Commit Charge Total is 1GB and yet the PerfMon metric is not 0. The Performance of the Task Manager states that PF Usage is 1.23GB. What should I do to better tune the box?

    Read the article

  • How to limit network usage for concrete application in linux that is running in it?

    - by B14D3
    I'm looking for something like nice for cpu, but for network usage that will limit application network consumption to level that will configure. I have problems with xapian-replicate-server that is consuming 80 % of my network. It's causing mysql connections problem (mysql server is working on this machine too). I can't move xapian or mysql to other machine so i need to limit xapian network usage to a decent level. Is there any tool that will help me do this ?

    Read the article

  • Why is 64 bit Ubuntu not recomended for daily usage?

    - by REA_ANDREW
    I am just in the process of setting up a new laptop which came with Windows 7 64 bit installed. I am going to set it up to dual boot Windows 7 and Ubuntu. When I went to get the Ubuntu download I noticed that the 64 bit version is labelled with Not recomended for daily desktop usageNot recomended for daily desktop usage Why would this be? Why is 64 bit Ubuntu not recommended for daily desktop usage?

    Read the article

  • SQL Server Analysis Services 2005 crash when disk is full?

    - by squillman
    One of our SQL boxes ran itself out of disk space last night. This particular server has both the database engine and analysis services on it. Database engine was not happy about having no disk space on the volume where all the data files are, but analysis services just plain died. At least, the only thing I have to blame is the full volume. Has anyone experienced a SSAS that they've been able to directly tie to no disk space? I've got nothing else in the SQL or event logs to blame...

    Read the article

  • On booting my laptop warns me about failure of hard disk is imminent...can it be repaired or to be replaced..?

    - by nrb
    when I am booting my laptop (Lenovo G550) it gives an error message prior to that.. SMART Failure Predicted on Hard Disk O:Hitachi HTS543225l9A300-(PM) Warning : Immediately back up your data and replace your hard disk drive. Afailure may be imminent. Press F1 to continue.. Once it started, it runs smoothly, I also verified its status by running some internal HDD tests by Hard Disk Senitel software..It shows no bad sector , no virus, no damage , normal temperature ... it suggests every thing is OK except its health... Now my question is that then what is the wrong with it..? It may be wrong with plates (dusty) or the read/write heads...then can I go for repair it or replace it...? My system now reminds me every half an hour to resolve this problem since last 10 days... Help me.

    Read the article

  • How do I fix "Setup did not find any hard disk drives installed in your computer" error during Win X

    - by CT
    I just bought a nettop. It came with WinXP Home. I first installed Win 7 on it. I wasn't that happy with the performance so I decided to go back to XP. I am using an external dvd drive and a Win XP Pro disc. I boot from the dvd drive and during the install get this error: Setup did not find any hard disk drives installed in your computer. Make sure any hard disk drives are powered on and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or setup program. Setup cannot continue. To quit Setup, press F3. This is the nettop in question: http://www.newegg.com/Product/Product.aspx?Item=N82E16883103228

    Read the article

  • How can I join non-consecutive partitions on internal hard disk?

    - by Andy
    I recently installed a new, larger hard disk in my PC at work (the office wouldn't spring for an upgrade for my 75GB disk, so I brought my own 2TB disk in from home). I managed to clone the original drive using CloneZilla, but now I have a 75GB partition on my new drive, followed by a 300MB partition, followed by a 1794.65GB of unallocated space. What I want is to add the unallocated space to the 75GB partition, thereby maximizing my C: drive. However, when I right-click on the C: partition, the option to "Extend Volume" is grayed out. How do I get all my fancy new extra space to be part of my C: drive? I also tried booting with GParted, but I get the same deal - cannot adjust the C: drive because there's no contiguous space.

    Read the article

  • Can you shrink the sparse disk image of a Mac OS X guest OS in VMWare Fusion?

    - by Paul D. Waite
    I use VMWare Fusion on my Mac to run a virtual Windows 7 machine, and the Microsoft IE compatibility Windows XP virtual machines. In VMWare Tools on the Windows guest OSes, there’s a “Shrink” option that lets you reduce the size of the sparse disk image used by the guest OS, to save hard drive space on your host OX. I’ve recently created another virtual machine, this time running Snow Leopard Server. I was wondering if I could shrink the spare disk image used by this machine too, but I can’t find a VMWare Tools app on the Mac guest OS, even though VMWare Tools have been installed (as VMWare’s Shared Folders feature is working). Is there any way to shrink the sparse disk image used by Mac OS X guest OSes in VMWare Fusion?

    Read the article

  • How do I fix "Setup did not find any hard disk drives installed in your computer" error during Win XP Pro install?

    - by CT.
    I just bought a nettop. It came with WinXP Home. I first installed Win 7 on it. I wasn't that happy with the performance so I decided to go back to XP. I am using an external dvd drive and a Win XP Pro disc. I boot from the dvd drive and during the install get this error: Setup did not find any hard disk drives installed in your computer. Make sure any hard disk drives are powered on and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or setup program. Setup cannot continue. To quit Setup, press F3. This is the nettop in question: http://www.newegg.com/Product/Product.aspx?Item=N82E16883103228

    Read the article

  • How to remove bad disk from LVM2 with the less data loss on other PVs?

    - by Walkman
    I had a LVM2 volume with two disks. The larger disk became corrupt, so I cant pvmove. What is the best way to remove it from the group to save the most data from the other disk? Here is my pvdisplay output: Couldn't find device with uuid WWeM0m-MLX2-o0da-tf7q-fJJu-eiGl-e7UmM3. --- Physical volume --- PV Name unknown device VG Name media PV Size 1,82 TiB / not usable 1,05 MiB Allocatable yes (but full) PE Size 4,00 MiB Total PE 476932 Free PE 0 Allocated PE 476932 PV UUID WWeM0m-MLX2-o0da-tf7q-fJJu-eiGl-e7UmM3 --- Physical volume --- PV Name /dev/sdb1 VG Name media PV Size 931,51 GiB / not usable 3,19 MiB Allocatable yes (but full) PE Size 4,00 MiB Total PE 238466 Free PE 0 Allocated PE 238466 PV UUID oUhOcR-uYjc-rNTv-LNBm-Z9VY-TJJ5-SYezce So I want to remove the unknown device (not present in the system). Is it possible to do this without a new disk ? The filesystem is ext4.

    Read the article

  • When HDD becomes full, how to create a symbolic link to the data store on another disk?

    - by Brij Raj Singh
    I have a Linux Ubuntu machine which has an X GB hard disk. There is folder, say, /opt/software/data. The disk /dev/sda1 is almost full and I have attached another disk at /dev/sda2 which is mounted at /hdd2. Is it possible for me to link the folders /opt/software/data with /hdd2/software/data so, that every file get stored in the /hdd2/software/data but may be referred from the /opt/software/data? I can't do a reinstall of the software that creates this data, to change the default location of storage.

    Read the article

  • What is the best way to shutdown hard disk?

    - by Sunil
    Right Now I'm using hdparm command in unix to shut down the hard disk but there are few issues with it. when it wakes back up it consumes lots power. Is there any other way to do it? Many times when I put my hard disk to sleep, I can see few bursts at the beginning and then after a while it goes to sleep. I think its because of the journaling system in ubuntu (which I use) Have anybody encountered that? What would be the best linux/unix operating system (eg: ubuntu/centos/redhat) to work on extensive hard disk operations? I would highly appreciate if you could share the problems you encountered while doing this operation.

    Read the article

  • How can I run fsck on a disk image via Mac Terminal?

    - by mvizual
    I want to run fsck on a disk image before I use it to restore (replace) a corrupted volume. Using Terminal, what would be the proper command, syntax, and options for this operation? I've just recently become acquainted with Terminal and line commands, so syntax and specific options aren't part of my computing vocabulary. I'm using Terminal 2.1.2, bash, OS 10.6.8. Ultimately, I'm trying to restore an image to a secondary startup volume (external drive). The image is mounted on my desktop and I want to check it for errors before I use it. Disk Utility runs "repair disk" successfully but the integrity of the image is suspect.

    Read the article

  • Vmware Workstation 10 connect remote server (Debian, Guest-Windows XP) Does not allow raw disk access nor shared folders

    - by Alex
    The setup: Ubuntu with local Vmware Workstation 10 (everything works locally) Connects(File- Connect to Server) Debian server with the same Vmware Workstation 10 (Windows XP Guest) Debian setup does not allow raw disk access nor shared folders (most options does not exist) No shared folder No physical disk option I use root user for this machine. Default install. I've tried to add shared folder from command line - it does not work. How to enable shared folders or raw disk access? I have created new Windows 8 64 bit template from scratch - I cannot use physical HDD either, and no SharedFolder option. I think this is something about security policy of remote server.

    Read the article

  • Ubuntu: Resize the root LVM(2?) partition

    - by user12259
    I have an Ubuntu virtual machine running in VirtualBox 2.2.4, and I created it on an 8gb virtual disk which is too small. So, I am trying to increase the size of the disk. So far, I have done this: Created a new larger virtual disk Added the 2nd disk to the machine Used CloneZilla to clone the first disk onto the 2nd disk Removed the first disk Booted up off the 2nd (larger disk) But now I'm still stuck with an 8gb partition on my new 100gb virtual disk. Whats the easiest path from here to having a 100gb partition? :) I gather GPart can resize partitions, but it doesn't seem to support LVM2 partitions, which mine seems to be. thx Alex

    Read the article

  • Recommended storage scheme for home server? (LVM/JBOD/RAID 5...)

    - by j-g-faustus
    Are there any guidelines for which storage scheme(s) makes most sense for a multiple-disk home server? I am assuming a separate boot/OS disk (so bootability is not a concern, this is for data storage only) and 4-6 storage disks of 1-2 TB each, for a total storage capacity in the range 4-12 TB. The file system is ext4, I expect there will be only one big partition spanning all disks. As far as I can tell, the alternatives are individual disks pros: works with any combination of disk sizes; losing a disk loses only the data on that disk; no need for volume management. cons: data management is clumsy when logical units (like a "movies" folder) are larger than the capacity of any single drive. JBOD span pros: can merge disks of any size. cons: losing a disk loses all data on all disks LVM pros: can merge disks of any size; relatively simple to add and remove disks. cons: losing a disk loses all data on all disks RAID 0 pros: speed cons: losing one drive loses all data; disks must be same size RAID 5 pros: data survives losing one disk cons: gives up one disk worth of capacity; disks must be same size RAID 6 pros: data survives losing two disks cons: gives up two disks worth of capacity; disks must be same size I'm primarily considering either LVM or JBOD span simply because it will let me reuse older, smaller-capacity disks when I upgrade the system. The runner-up is RAID 0 for speed. I'm planning on having full backups to a separate system, so I expect the extra redundancy from RAID levels 5 or 6 won't be important. Is this a fair representation of the alternatives? Are there other considerations or alternatives I have missed? And what would you recommend?

    Read the article

  • Baisse de la vitesse globale des connexions mondiales, serait-ce du à l'usage de plus en plus fréque

    Baisse de la vitesse globale des connexions mondiales, serait-ce du à l'usage de plus en plus fréquent du Net mobile ? Malgré une constante croissance des débits les plus rapides, cette rapidité ne s'étend pas pour autant à toutes les connexions Internet du monde. Selon un rapport sur l'état du Net basé sur des informations collectées pendant les trois derniers mois de l'année 2009, le nombre de connexions d'une vitesse de 2 Mbps et plus serait en déclin depuis l'année dernière. Cette étude a étudié les données émanant de 465 adresses IP uniques en provenance de 234 pays qui se sont connectées sur le réseau d'Akamai (l'entreprise à l'origine du rapport), au dernier trimestre 2009. C'est 16% de connexions en plus com...

    Read the article

  • Very high CPU and low RAM usage - is it possible to place some of swap some of the CPU usage to the RAM (with CloudLinux LVE Manager installed)?

    - by Chriswede
    I had to install CloudLinux so that I could somewhat controle the CPU ussage and more importantly the Concurrent-Connections the Websites use. But as you can see the Server load is way to high and thats why some sites take up to 10 sec. to load! Server load 22.46 (8 CPUs) (!) Memory Used 36.32% (2,959,188 of 8,146,632) (ok) Swap Used 0.01% (132 of 2,104,504) (ok) Server: 8 x Intel(R) Xeon(R) CPU E31230 @ 3.20GHz Memory: 8143680k/9437184k available (2621k kernel code, 234872k reserved, 1403k data, 244k init) Linux Yesterday: Total of 214,514 Page-views (Awstat) Now my question: Can I shift some of the CPU usage to the RAM? Or what else could I do to make the sites run faster (websites are dynamic - so SQL heavy) Thanks top - 06:10:14 up 29 days, 20:37, 1 user, load average: 11.16, 13.19, 12.81 Tasks: 526 total, 1 running, 524 sleeping, 0 stopped, 1 zombie Cpu(s): 42.9%us, 21.4%sy, 0.0%ni, 33.7%id, 1.9%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 8146632k total, 7427632k used, 719000k free, 131020k buffers Swap: 2104504k total, 132k used, 2104372k free, 4506644k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 318421 mysql 15 0 1315m 754m 4964 S 474.9 9.5 95300:17 mysqld 6928 root 10 -5 0 0 0 S 2.0 0.0 90:42.85 kondemand/3 476047 headus 17 0 172m 19m 10m S 1.7 0.2 0:00.05 php 476055 headus 18 0 172m 18m 9.9m S 1.7 0.2 0:00.05 php 476056 headus 15 0 172m 19m 10m S 1.7 0.2 0:00.05 php 476061 headus 18 0 172m 19m 10m S 1.7 0.2 0:00.05 php 6930 root 10 -5 0 0 0 S 1.3 0.0 161:48.12 kondemand/5 6931 root 10 -5 0 0 0 S 1.3 0.0 193:11.74 kondemand/6 476049 headus 17 0 172m 19m 10m S 1.3 0.2 0:00.04 php 476050 headus 15 0 172m 18m 9.9m S 1.3 0.2 0:00.04 php 476057 headus 17 0 172m 18m 9.9m S 1.3 0.2 0:00.04 php 6926 root 10 -5 0 0 0 S 1.0 0.0 90:13.88 kondemand/1 6932 root 10 -5 0 0 0 S 1.0 0.0 247:47.50 kondemand/7 476064 worldof 18 0 172m 19m 10m S 1.0 0.2 0:00.03 php 6927 root 10 -5 0 0 0 S 0.7 0.0 93:52.80 kondemand/2 6929 root 10 -5 0 0 0 S 0.3 0.0 161:54.38 kondemand/4 8459 root 15 0 103m 5576 1268 S 0.3 0.1 54:45.39 lvest

    Read the article

  • Linux fsck.ext3 says "Device or resource busy" although I did not mount the disk.

    - by matnagel
    I am running an ubuntu 8.04 server instance with a 8GB virtual disk on vmware 1.0.9. For disk maintenance I made a copy of the virtual disk (by making a copy of the 2 vmdk files of sda on the stopped vm on the host) and added it to the original vm. Now this vm has it's original virtual disk sda plus a 1:1 copy (sdd). There are 2 additional disk sdb and sdc which I ignore.) I would expect sdb not to be mounted when I start the vm. So I try tp do a ext2 fsck on sdd from the running vm, but it reports fsck reported that sdb was mounted. $ sudo fsck.ext3 -b 8193 /dev/sdd e2fsck 1.40.8 (13-Mar-2008) fsck.ext3: Device or resource busy while trying to open /dev/sdd Filesystem mounted or opened exclusively by another program? The "mount" command does not tell me sdd is mounted: $ sudo mount /dev/sda1 on / type ext3 (rw,relatime,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) /sys on /sys type sysfs (rw,noexec,nosuid,nodev) varrun on /var/run type tmpfs (rw,noexec,nosuid,nodev,mode=0755) varlock on /var/lock type tmpfs (rw,noexec,nosuid,nodev,mode=1777) udev on /dev type tmpfs (rw,mode=0755) devshm on /dev/shm type tmpfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) /dev/sdc1 on /mnt/r1 type ext3 (rw,relatime,errors=remount-ro) /dev/sdb1 on /mnt/k1 type ext3 (rw,relatime,errors=remount-ro) securityfs on /sys/kernel/security type securityfs (rw) When I ignore the warning and continue the fsck, it reported many errors. How do I get this under control? Is there a better way to figure out if sdd is mounted? Or how is it "busy? How to unmount it then? How to prevent ubuntu from automatically mounting. Or is there something else I am missing? Also from /var/log/syslog I cannot see it is mounted, this is the last part of the startup sequence: kernel: [ 14.229494] ACPI: Power Button (FF) [PWRF] kernel: [ 14.230326] ACPI: AC Adapter [ACAD] (on-line) kernel: [ 14.460136] input: PC Speaker as /devices/platform/pcspkr/input/input3 kernel: [ 14.639366] udev: renamed network interface eth0 to eth1 kernel: [ 14.670187] eth1: link up kernel: [ 16.329607] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/ kernel: [ 16.367540] parport_pc 00:08: reported by Plug and Play ACPI kernel: [ 16.367670] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] kernel: [ 19.425637] NET: Registered protocol family 10 kernel: [ 19.437550] lo: Disabled Privacy Extensions kernel: [ 24.328857] loop: module loaded kernel: [ 24.449293] lp0: using parport0 (interrupt-driven). kernel: [ 26.075499] EXT3 FS on sda1, internal journal kernel: [ 28.380299] kjournald starting. Commit interval 5 seconds kernel: [ 28.381706] EXT3 FS on sdc1, internal journal kernel: [ 28.381747] EXT3-fs: mounted filesystem with ordered data mode. kernel: [ 28.444867] kjournald starting. Commit interval 5 seconds kernel: [ 28.445436] EXT3 FS on sdb1, internal journal kernel: [ 28.445444] EXT3-fs: mounted filesystem with ordered data mode. kernel: [ 31.309766] eth1: no IPv6 routers present kernel: [ 35.054268] ip_tables: (C) 2000-2006 Netfilter Core Team mysqld_safe[4367]: started mysqld[4370]: 100124 14:40:21 InnoDB: Started; log sequence number 0 10130914 mysqld[4370]: 100124 14:40:21 [Note] /usr/sbin/mysqld: ready for connections. mysqld[4370]: Version: '5.0.51a-3ubuntu5.4' socket: '/var/run/mysqld/mysqld.sock' port: 3 /etc/mysql/debian-start[4417]: Upgrading MySQL tables if necessary. /etc/mysql/debian-start[4422]: Looking for 'mysql' in: /usr/bin/mysql /etc/mysql/debian-start[4422]: Looking for 'mysqlcheck' in: /usr/bin/mysqlcheck /etc/mysql/debian-start[4422]: This installation of MySQL is already upgraded to 5.0.51a, u /etc/mysql/debian-start[4436]: Checking for insecure root accounts. /etc/mysql/debian-start[4444]: Checking for crashed MySQL tables.

    Read the article

< Previous Page | 103 104 105 106 107 108 109 110 111 112 113 114  | Next Page >