Search Results

Search found 10388 results on 416 pages for 'hardware selection'.

Page 107/416 | < Previous Page | 103 104 105 106 107 108 109 110 111 112 113 114  | Next Page >

• No HDMI Audio with GeForce 9600GT and nForce board

  - by Bobby

  I've been trying to get HDMI with sound working for the last few days, and I'm a little bit out of ideas. (I've verified that the hardware/Setup works via Windows.) aplay does not list my HDMI device: $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: NVidia [HDA NVidia], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 1: ALC662 rev1 Digital [ALC662 rev1 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 I've already compiled the alsa drivers (1.0.24) from a snapshot (with --with-oss=no) and added the line options snd-hda-intel model=auto # Tried 3stack-dig and 6stack-dig too to /etc/modprobe.d/alsa-base.conf. Still, the device does not show up. If it is important, the HDMI TV is at the moment not configured to be part of the X session (I've tried that to, at least with X restart, and it didn't change anything). What did I miss? $ lspci 00:00.0 Host bridge: nVidia Corporation Device 07c3 (rev a2) 00:00.1 RAM memory: nVidia Corporation nForce 630i memory controller (rev a2) 00:01.0 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:01.1 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:01.2 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:01.3 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:01.4 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:01.5 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:01.6 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:02.0 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:03.0 ISA bridge: nVidia Corporation MCP73 LPC Bridge (rev a2) 00:03.1 SMBus: nVidia Corporation MCP73 SMBus (rev a1) 00:03.2 RAM memory: nVidia Corporation MCP73 Memory Controller (rev a1) 00:03.4 RAM memory: nVidia Corporation MCP73 Memory Controller (rev a1) 00:04.0 USB Controller: nVidia Corporation GeForce 7100/nForce 630i USB (rev a1) 00:04.1 USB Controller: nVidia Corporation MCP73 [nForce 630i] USB 2.0 Controller (EHCI) (rev a1) 00:08.0 IDE interface: nVidia Corporation MCP73 IDE (rev a1) 00:09.0 Audio device: nVidia Corporation MCP73 High Definition Audio (rev a1) 00:0a.0 PCI bridge: nVidia Corporation MCP73 PCI Express bridge (rev a1) 00:0b.0 PCI bridge: nVidia Corporation MCP73 PCI Express bridge (rev a1) 00:0c.0 PCI bridge: nVidia Corporation MCP73 PCI Express bridge (rev a1) 00:0d.0 PCI bridge: nVidia Corporation MCP73 PCI Express bridge (rev a1) 00:0e.0 IDE interface: nVidia Corporation MCP73 IDE (rev a2) 00:0f.0 Ethernet controller: nVidia Corporation MCP73 Ethernet (rev a2) 02:00.0 VGA compatible controller: nVidia Corporation G94 [GeForce 9600 GT] (rev a1)   $ aplay -L default pulse Playback/recording through the PulseAudio sound server front:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Front speakers surround40:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Digital IEC958 (S/PDIF) Digital Audio Output dmix:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct sample mixing device dmix:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct sample mixing device dsnoop:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct sample snooping device dsnoop:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct sample snooping device hw:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct hardware device without any conversions hw:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct hardware device without any conversions plughw:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Hardware device with all software conversions plughw:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Hardware device with all software conversions

  Read the article

• Another sound not working post

  - by Thomas Smart

  Tried all the other "sound not working" posts i think, lost count. purge/reinstall alsa and pulse, reboot, add user to audio group, various lines in the alsa config file such as "options snd-hda-intel model=" then tried different options like generic, auto, basic, default, etc. tried pulseaudio -k && sudo alsa force-reload a few times, with and without rebooting. Hardware: 16gb ram, core I7-4790, Intel Haswell mboard with onboard sound and graphics Multimedia: Audio Adapter: HDA-Intel-HDA Intel HDMI OS: Ubuntu server 14.04 with ubuntu-desktop installed. GUI sound settings lists only the dummy sound card alsamixer -c 0 ¦ Card: HDA Intel HDMI F1: Help ¦ ¦ Chip: Intel Haswell HDMI F2: System information ¦ ¦ View: F3:[Playback] F4: Capture F5: All F6: Select sound card ¦ ¦ Item: S/PDIF ¦ ¦ +--+ ¦ ¦ ¦OO¦ ¦ ¦ +--+ ¦ ¦ < S/PDIF > ¦ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 aplay -L default Playback/recording through the PulseAudio sound server null Discard all samples (playback) or generate zero samples (capture) pulse PulseAudio Sound Server hdmi:CARD=HDMI,DEV=0 HDA Intel HDMI, HDMI 0 HDMI Audio Output dmix:CARD=HDMI,DEV=3 HDA Intel HDMI, HDMI 0 Direct sample mixing device dsnoop:CARD=HDMI,DEV=3 HDA Intel HDMI, HDMI 0 Direct sample snooping device hw:CARD=HDMI,DEV=3 HDA Intel HDMI, HDMI 0 Direct hardware device without any conversions plughw:CARD=HDMI,DEV=3 HDA Intel HDMI, HDMI 0 Hardware device with all software conversions cat /proc/asound/cards 0 [HDMI ]: HDA-Intel - HDA Intel HDMI HDA Intel HDMI at 0xf7d14000 irq 46 cat /proc/asound/devices 1: : sequencer 2: [ 0- 3]: digital audio playback 3: [ 0- 0]: hardware dependent 4: [ 0] : control 33: : timer mplayer -ao alsa:device=hdmi /usr/share/sounds/ubuntu/stereo/system-ready.ogg MPlayer 1.1-4.8 (C) 2000-2012 MPlayer Team mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing /usr/share/sounds/ubuntu/stereo/system-ready.ogg. libavformat version 54.20.4 (external) Mismatching header version 54.20.3 libavformat file format detected. [lavf] stream 0: audio (vorbis), -aid 0 Load subtitles in /usr/share/sounds/ubuntu/stereo/ ========================================================================== Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders libavcodec version 54.35.0 (external) AUDIO: 44100 Hz, 1 ch, floatle, 80.0 kbit/5.67% (ratio: 10000->176400) Selected audio codec: [ffvorbis] afm: ffmpeg (FFmpeg Vorbis) ========================================================================== [AO_ALSA] alsa-lib: confmisc.c:768:(parse_card) cannot find card '1' [AO_ALSA] alsa-lib: conf.c:4248:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory [AO_ALSA] alsa-lib: confmisc.c:392:(snd_func_concat) error evaluating strings [AO_ALSA] alsa-lib: conf.c:4248:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory [AO_ALSA] alsa-lib: confmisc.c:1251:(snd_func_refer) error evaluating name [AO_ALSA] alsa-lib: conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory [AO_ALSA] alsa-lib: conf.c:4727:(snd_config_expand) Evaluate error: No such file or directory [AO_ALSA] alsa-lib: pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM hdmi [AO_ALSA] Playback open error: No such file or directory Failed to initialize audio driver 'alsa:device=hdmi' Could not open/initialize audio device -> no sound. Audio: no sound Video: no video Exiting... (End of file) mplayer -ao alsa:device=hw=0.3 /usr/share/sounds/ubuntu/stereo/system-ready.ogg MPlayer 1.1-4.8 (C) 2000-2012 MPlayer Team mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing /usr/share/sounds/ubuntu/stereo/system-ready.ogg. libavformat version 54.20.4 (external) Mismatching header version 54.20.3 libavformat file format detected. [lavf] stream 0: audio (vorbis), -aid 0 Load subtitles in /usr/share/sounds/ubuntu/stereo/ ========================================================================== Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders libavcodec version 54.35.0 (external) AUDIO: 44100 Hz, 1 ch, floatle, 80.0 kbit/5.67% (ratio: 10000->176400) Selected audio codec: [ffvorbis] afm: ffmpeg (FFmpeg Vorbis) ========================================================================== [AO_ALSA] Format floatle is not supported by hardware, trying default. AO: [alsa] 44100Hz 2ch s16le (2 bytes per sample) Video: no video Starting playback... A: 0.4 (00.4) of 0.8 (00.7) 0.1% Exiting... (End of file) Thank you for your time and help :)

  Read the article

• Change the background color of selected text in Google Docs to increase readability [migrated]

  - by gene_wood

  How can I override or change the background color of text selected in Google Docs? It is difficult for me to see the difference and I would like to increase the contrast or difference. After Google restyled Google Docs last year (or earlier this year), I've been unable to see selected text. It's possible this is a visual deficiency with my eyes. In Google Docs, under both Google Chrome (17.0.963.83 (Official Build 127885) m) and Firefox (11.0), when I select text inside a Google Doc, the selected text has a background of color #d6e0f5. Compare this to the default browser background color of #2f65c0. (I determined the color of the selected text background by taking a screenshot and using the color picker tool in Photoshop). I've tested this using a brand new Firefox profile as well as google chrome profile. Here's a section of a screenshot showing the selected text : I've tried using a userscript to override the CSS to go back to the default text selection color using the "Stylish" plugin with this css : ::selection { background:#2f65c0; color:#ffffff; } ::-moz-selection { background:#2f65c0; color:#ffffff; } ::-webkit-selection { background:#2f65c0; color:#ffffff; } This code works on other sites, but I'm unable to get it to work on Google Docs. (I tested on other sites but applying the userscript to a different domain and using bright yellow instead of the default dark blue #2f65c0.) When you use Google Docs, do you have the same color background for selected text or something different? (To test this, browse to docs.google.com , create a document, type text into the document, select the text with the mouse by dragging over it, take a screenshot, load the screenshot up in an image editor and determine the background color of the selected text.) This color differential (between light blue #d6e0f5 and white #fffff) may be easy to see for others and the problem lies with my eyes.

  Read the article

• Android application listed as compatible with Sony Xperia S but still filtered from google play

  - by mlidal

  I have published an Android application and some users are complaining that it is listed as not compatible with Sony Xperia S. According to the developer console Xperia S (LT26i) is listed as compatible. Do anyone know of any reason why the app is still filtered from google play? I have seen people reporting problems with big apk files. This app is about 20Mb in size, with the largest file being 14Mb. Quite a bit but not enough to cause problems I think... Here is the output from aapt dump badging: package: name='no.bouvet.nrkut' versionCode='4' versionName='1.0' sdkVersion:'4' targetSdkVersion:'13' uses-permission:'android.permission.ACCESS_FINE_LOCATION' uses-permission:'android.permission.ACCESS_COARSE_LOCATION' uses-permission:'android.permission.ACCESS_WIFI_STATE' uses-permission:'android.permission.ACCESS_NETWORK_STATE' uses-permission:'android.permission.INTERNET' uses-permission:'android.permission.WRITE_EXTERNAL_STORAGE' application-label:'UT.no' application-icon-120:'res/drawable-ldpi/utno_launcher.png' application-icon-160:'res/drawable-mdpi/utno_launcher.png' application-icon-240:'res/drawable-hdpi/utno_launcher.png' application-icon-320:'res/drawable-xhdpi/utno_launcher.png' application: label='UT.no' icon='res/drawable-mdpi/utno_launcher.png' launchable-activity: name='no.bouvet.nrkut.MainActivity' label='UT.no' icon='' uses-feature:'android.hardware.location' uses-feature:'android.hardware.location.gps' uses-feature:'android.hardware.location.network' uses-feature:'android.hardware.wifi' uses-feature:'android.hardware.touchscreen' uses-feature:'android.hardware.screen.portrait' main other-activities search supports-screens: 'small' 'normal' 'large' 'xlarge' supports-any-density: 'true' locales: '--_--' densities: '120' '160' '240' '320'

  Read the article

• Will WCF allow me to use object references across boundries on objects that implement INotifyPropert

  - by zimmer62

  So I've created a series of objects that interact with a piece of hardware over a serial port. There is a thread running monitoring the serial port, and if the state of the hardware changes it updates properties in my objects. I'm using observable collections, and INotifyPropertyChanged. I've built a UI in WPF and it works great, showing me real time updating when the hardware changes and allows me to send changes to the hardware as well by changing these properties using bindings. What I'm hoping is that I can run the UI on a different machine than what the hardware is hooked up to without a lot of wiring up of events. Possibly even allow multiple UI's to connect to the same service and interact with this hardware. So far I understand I'm going to need to create a WCF service. I'm trying to figure out if I'll be able to pass a reference to an object created at the service to the client leaving events intact. So that the UI will really just be bound to a remote object. Am I moving the right direction with WCF? Also I see tons of examples for WCF in C#, are there any good practical use examples in VB that might be along the lines of what I'm trying to do?

  Read the article

• New Wine in New Bottles

  - by Tony Davis

  How many people, when their car shows signs of wear and tear, would consider upgrading the engine and keeping the shell? Even if you're cash-strapped, you'll soon work out the subtlety of the economics, the cost of sudden breakdowns, the precious time lost coping with the hassle, and the low 'book value'. You'll generally buy a new car. The same philosophy should apply to database systems. Mainstream support for SQL Server 2005 ends on April 12; many DBAS, if they haven't done so already, will be considering the migration to SQL Server 2008 R2. Hopefully, that upgrade plan will include a fresh install of the operating system on brand new hardware. SQL Server 2008 R2 and Windows Server 2008 R2 are designed to work together. The improved architecture, processing power, and hyper-threading capabilities of modern processors will dramatically improve the performance of many SQL Server workloads, and allow consolidation opportunities. Of course, there will be many DBAs smiling ruefully at the suggestion of such indulgence. This is nothing like the real world, this halcyon place where hardware and software budgets are limitless, development and testing resources are plentiful, and third party vendors immediately certify their applications for the latest-and-greatest platform! As with cars, or any other technology, the justification for a complete upgrade is complex. With Servers, the extra cost at time of upgrade will generally pay you back in terms of the increased performance of your business applications, reduced maintenance costs, training costs and downtime. Also, if you plan and design carefully, it's possible to offset hardware costs with reduced SQL Server licence costs. In his forthcoming SQL Server Hardware book, Glenn Berry describes a recent case where he was able to replace 4 single-socket database servers with one two-socket server, saving about $90K in hardware costs and $350K in SQL Server license costs. Of course, there are exceptions. If you do have a stable, reliable, secure SQL Server 6.5 system that still admirably meets the needs of a specific business requirement, and has no security vulnerabilities, then by all means leave it alone. Why upgrade just for the sake of it? However, as soon as a system shows sign of being unfit for purpose, or is moving out of mainstream support, the ruthless DBA will make the strongest possible case for a belts-and-braces upgrade. We'd love to hear what you think. What does your typical upgrade path look like? What are the major obstacles? Cheers, Tony.

  Read the article

• Viewing at Impossible Angles

  - by kemer

  The picture of the little screwdriver with the Allen wrench head to the right is bound to invoke a little nostalgia for those readers who were Sun customers in the late 80s. This tool was a very popular give-away: it was essential for installing and removing Multibus (you youngsters will have to look that up on Wikipedia…) cards in our systems. Back then our mid-sized systems were gargantuan: it was routine for us to schlep around a 200 lb. desk side box and 90 lb. monitor to demo a piece of software your smart phone will run better today. We were very close to the hardware, and the first thing a new field sales systems engineer had to learn was how put together a system. If you were lucky, a grizzled service engineer might run you through the process once, then threaten your health and existence should you ever screw it up so that he had to fix it. Nowadays we make it much easier to learn the ins and outs of our hardware with simulations–3D animations–that take you through the process of putting together or replacing pieces of a system. Most recently, we have posted three sophisticated PDFs that take advantage of Acrobat 9 features to provide a really intelligent approach to documenting hardware installation and repair: Sun Fire X4800/X4800 M2 Animations for Chassis Components Sun Fire X4800/X4800 M2 Animations for Sub Assembly Module (SAM) Sun Fire X4800/X4800 M2 Animations for CMOD Download one of these documents and take a close look at it. You can view the hardware from any angle, including impossible ones. Each document has a number of procedures, that break down into steps. Click on a procedure, then a step and you will see it animated in the drawing. Of course hardware design has generally eliminated the need for things like our old giveaway tools: components snap and lock in. Often you can replace redundant units while the system is hot, but for heaven’s sake, you’ll want to verify that you can do that before you try it! Meanwhile, we can all look forward to a growing portfolio of these intelligent documents. We would love to hear what you think about them. –Kemer

  Read the article

• Vista install works on one computer, but bluescreens another (on which Vista is known to work)

  - by Ken

  I hope my explanations make some sense -- please ask for clarification if they don't. I had a computer running Windows Vista (Ultimate, 64-bit). All was well! Then one day there was a nasty power surge at the office, and it died. (We didn't have surge protectors at the office, unfortunately. I assumed our lines were conditioned elsewhere, or was not an issue here. Oops.) After some testing, it was determined that the PSU, motherboard, and RAM were bad. While waiting for new hardware to arrive, I put my hard disk in a spare PC which had identical parts (mobo/CPU/RAM/PSU/video). Everything worked perfectly. The only way I could even tell it wasn't my computer is because Vista asked to re-activate itself with the new hardware, which worked fine, too. So the hard disk seems OK. Then the new parts arrived. The old motherboard model is no longer manufactured, so it's a new one with the same CPU/RAM/videocard/etc. slots. The PSU is also new, while the RAM I'm using is from the spare PC mentioned above. When I put it together and tried booting with my old hard disk, it starts to boot Windows, and then (fairly early in the process) gives a bluescreen and immediately reboots (so I can't see whatever the bluescreen is trying to tell me). I tried "safe mode", which also bluescreened. I tried booting the Vista DVD and running the repair utility, which found a Vista install, confirmed that it would not boot, and, eventually, declared that it was unable to repair it. I installed Vista fresh on a new hard disk, with the new mobo/etc., and it works perfectly. (That's what I'm running now.) I've also booted a Linux CD here, which ran great, and I've run Memtest86+ for a while, which found no errors. So all the hardware apart from the old hard disk seems OK, too. I don't think the problem is with my old Vista hard disk, since I used that with another mobo/CPU just fine. I don't think it's any other part of the new hardware, since I'm able to use it (and test it) with no trouble. It's just the combination of my old Vista install plus the new PC hardware that's not happy. I can get my data off my old hard disk and onto my new hard disk, and reinstall my apps, but it would be nice if I could fix things so I could continue to use my old hard disk as before. The latest hypothesis I've heard is that Vista had trouble with the new hardware (i.e., motherboard), but we have no idea what to do about that (except Safe Mode, which didn't work). Suggestions? Hypotheses for what's not right about this combination of Vista install and motherboard? Thanks!

  Read the article

• Diff 2 large XML files to produce a delta xml file

  - by aniln

  Need to be able to diff 2 large / very large XML files and produce the delta XML file. Also, as this process will be part of a larger automated process on below hardware / OS config. Machine hardware: sun4v OS version: 5.10 Processor type: sparc Hardware: SUNW,SPARC-Enterprise-T5220 Please let me know if there's an installable application on Solaris which can be called as part of a ksh script Example: Run driver_script.ksh Above script will have a line: xml_delta file1.xml file2.xml delta_file.xml where xml_delta is the installable application which produces the delta file after comparing file1.xml and file2.xml

  Read the article

• Performance of Virtual machines on very low end machines

  - by TheLQ

  I am managing a few cheap servers as my user base isn't large enough to get much more powerful servers. I also don't have the money lying around to invest in a server to prepare for the larger user base. So I'm stuck with the old hardware I have. I am toying with the idea of virtualizing all the current OS's with most likely VMware vSphere Hypervisor (AKA ESXi) Xen (ESXi has too strict of an HCL, and my hardware is too old). Big reasons for doing so: Ability to upgrade and scale hardware rapidly - This is most likely what I'll be doing as I distribute services, get a bigger server, centralize (electricity bills are horrible), distribute, get a bigger server, etc... Manually doing this by reinstalling the entire OS would be a big pain Safety from me - I've made many rookie mistakes, like doing lots of risky work on a vital production server. With a VM I can just backup the state, work on my machine, test, and revert if necessary. No worries, and no OS reinstallation Safety from other factors - As I scale servers might go down, and a backup VM can instantly be started. Various other reasons. However the limiting factor here is hardware. And I mean very depressing hardware. The current server's run off of a Pentium 3 and 4, and have 512 MB and 768 MB RAM respectively (RAM can be upgraded soon however). Is the Virtualization layer small enough to run itself and a Linux OS effectively? Will performance be acceptable (50% CPU overhead for every operation isn't acceptable)? Does it leave enough RAM for the Linux OS? Is this even feasible?

  Read the article

• Enable automatic driver install in Windows XP

  - by Peter

  When Windows detects new hardware (be it graphic card or USB Peripheral) it automatically installs driver and if it can't find a driver it shows "Found New hardware wizard" that allows you to manually select a driver. My problem is that this "Found New hardware wizard" shows up every time when I plug a new device and I have to click Next Next Next.. until it finishes installation. It's just like in Windows 98 ;) I want to fix it to the way it's supposed to be. It's got nothing to do with "Windows Update" and "Driver Signing" settings in "System properties - Hardware" tab, those are on default settings. Here is the same problem I have, but those replies ale completely useless

  Read the article

• Re-open Word document to previous cursor location with identical page vertical position

  - by Malcolm

  I would like to return to my previous point of edit with the page vertically positioned identical to its original vertical position. The Shift+F5 technique returns me to the previous point of edit, but the page I return to is vertically positioned on the screen in a somewhat random manner. In other words, if my cursor is 300 vertical pixels from the top of the document viewport, I would like to re-open my page so that the location of the cursor is still 300 vertical pixels from the top of my viewport. The following can be used to determine the vertical position (on the screen) of my text cursor: ActiveWindow.GetPoint pLeft, pTop, pWidth, pHeight, Selection.Range So the challenge becomes how to scroll my document in such a manner as to return my text cursor to its original vertical position (pHeight)? There is no corresponding ActiveWindow.SetPoint and ActiveWindow.ScrollIntoView scrolls a selection range into view, but offers no control over the vertical position of the selection range on the screen.

  Read the article

• Backup Exec 2010 throwing error trying to restore Exchange mailbox

  - by Mindflux

  Error category : Resource ErrorsError : e000848c - Unable to attach to a resource. Make sure that all selected resources exist and are online, and then try again. If the server or resource no longer exists, remove it from the selection list. Edit the selection list properties, click the View Selection DFor additional information regarding this error refer to link V-79-57344-33932 I've got the Exchange agent loaded on the Exchange server. Through talking with some other folks I've added the Exchange Management Console to the Media(Backup) server. None of this has helped. I can back up Exchange all day long, however I cannot restore from it. I've followed the link given (V-79-57344-33923) which goes here and none of that has helped either. Server is running: Win Server 2008 w/ SP2 (64 bit) Backup Exec 2010 I am backing up to a Tandberg T24 tape library.

  Read the article

• How does the LeftHand SAN perform in a Production environment?

  - by Keith Sirmons

  Howdy, I previously asked this ServerFault question: Does anyone have experience with lefthands VSA SAN The general consensus looks like it does not perform well enough for a production SQL server even at a light load. So the new question is, How does LeftHand's SAN perform on the HP or Dell dedicated Hardware boxes? We are looking at the Starter SAN with 2 HP nodes in a 2-way replication, 2 ESX servers hosting a total of 2 Active Directory server, 1 MS SQL server, 1 File Server, and 1 General Purpose Server for things like Virus Scan (All Microsoft Server 2005 or 2008). The reason I am looking at LeftHand is for the complete software package. I plan to have a DR site and like how the SAN can perform an Async Replication to the offsite location without having to go back to the Vendor for more licenses. I also like the redundancy built into the Network Raid architecture. I have looked at other SANS and found different faults with them. For example, Dell's EqualLogic: Found that although the individual box is very redundant in hardware, the Data once spanned across multiple boxes is not redundant, if a node goes down you have lost the only copy of the data sitting on that hardware (One thing is certain, all hardware fails... When? is the only question.). I have used an XioTech SAN as well.. Well worth the money BTW, but I think it is overkill for the size of the office I am targeting. The cost to get the hardware redundancy in the XioTech makes it a little out of reach for the budget I am working in. Thank you, Keith

  Read the article

• Timing issue with autohotscript, fails to dump or open destination file

  - by learnerforever

  I've created a autohotscript to quickly dump selected text into my jot file on the Desktop and I think I'm facing a timing error. The script works like thus: Select text when reading a text file, browsing internet, reading PDF, etc. Hit Ctrl + J Contents of selected text is dumped into my jot file. When I press Ctrl + J very quickly, it sometimes doesn't come up in my jot file and sometimes when I keep pressing Ctrl + J for a long time, many instances of the text appear. Could somebody please point out what's wrong with this script and how I can improve it. ^j:: Clipboard := "" ; clear Send, ^c ; simulate Ctrl+C (=selection in clipboard) selection = %Clipboard% ; save the content of the clipboard FileAppend, `n%selection%`n,C:\Users\jagrati\Desktop\jots.txt return

  Read the article

• Software mirroring (RAID1) versus "Fake Raid" for new Windows 7 install

  - by kquinn

  I've just ordered two new hard drives for my main desktop and a copy of Windows 7 Professional 64-bit. I'd like to do a clean install of Win7 onto the new drives (leaving my old XP Pro boot partition around for a while in case something goes disastrously wrong, etc.). I want to have them set up in mirrored (RAID-1) mode. My understanding is that Win7 Pro can do software mirroring, but can I set this up directly at install time? If so, how? Note that I'd like the disk to be split into three partitions (OS/Apps&Data/Bulk data), all of which should be mirrored. Would it be better (more reliable or faster) to use my motherboard's hardware RAID support? My motherboard is an older nVidia nForce 680i SLI, which is not the most stable of motherboards, and I'm not sure how trustworthy its RAID1 configuration might be (or if Win7 could even detect and install onto a hardware-mirrored volume). Also, the performance characteristics of RAID1 are rather different than RAID0 or RAID5, and I'm wondering if Win7's software mirroring might actually be faster than hardware RAID1 (for example, I'm more of a Unix admin when I have to wear the sysadmin hat, and I've had great success deploying ZFS; most hardware RAID1 implementations have to read both disks and compare results to look for data errors, but ZFS can read from only one disk in the mirror and just use the built-in checksum, meaning it can have up to 2x the number of reads in-flight, as long as there's no data corruption). Edit: Okay, my question about whether Windows 7 can do software mirroring has been answered, and it can. I'm still unsure whether Windows software RAID or my motherboard's hardware "fake RAID" function is a better choice, though. Remember, I'm only interested in mirroring -- not the more complicated striping or parity operations that generally show the poor performance of crappy motherboard RAID solutions.

  Read the article

• Performance experiences for running Windows 7 on a Thin-Client?

  - by Peter Bernier

  Has anyone else tried installing Windows 7 on thin-client hardware? I'd be very interested to hear about other people's experiences and what sort of hardware tweaks they had to do to get it to work. (Yes, I realize this is completely unsupported.. half the fun of playing with machines and beta/RC versions is trying out unsupported scenarios. :) ) I managed to get Windows 7 installed on a modified Wyse 9450 Thin-Client and while the performance isn't great, it is usable, particularly as an RDP workstation. Before installing 7, I added another 256Mb of ram (512 total), a 60G laptop hard-drive and a PCI videocard to the 9450 (this was in order to increase the supported screen resolution). I basically did this in order to see whether or not it was possible to get 7 installed on such minimal hardware, and see what the performance would be. For a 550Mhz processor, I was reasonably impressed. I've been using the machine for RDP for the last couple of days and it actually seems slightly snappier than the default Windows XP embedded install (although this is more likely the result of the extra hardware). I'll be running some more tests later on as I'm curious to see particularl whether the streaming video performance will improve. I'd love to hear about anyone's experiences getting 7 to work on extremely low-powered hardware. Particularly any sort of tweaks that you've discovered in order to increase performance..

  Read the article

• Error starting Hyper-V VM

  - by Peter Bernier

  I'm trying to start a VM on a new Hyper-V installation and I'm receiving the following error: The virtual machine could not be started because the hypervisor is not running. The following actions may help you resolve the problem: 1) Verify that the processor of the physical computer has a supported version of hardware-assisted virtualization. 2) Verify that hardware-assisted virtualization and hardware-assisted data execution protection are enabled in the BIOS of the physical computer. (If you edit the BIOS to enable either setting, you must turn off the power to the physical computer and then turn it back on. Resetting the physical computer is not sufficient.) 3) If you have made changes to the Boot Configuration Data store, review these changes to ensure that the hypervisor is configured to launch automatically. My machine supports virtualization at the hardware level and it is enabled in BIOS. Why am I receiving this error?

  Read the article

• Stability, x86 Vs Sparc

  - by Jason T

  Our project are plan to migrate from Sparc to x86, and our HA requirement is 99.99%, previous on Sparc, we assume the hardware stability would like, hardware failure every 4 month or even one year, and also we have test data for our application, then we have requirement for each unplanned recovery (fail over) to achieve 99.99% (52.6 minutes unplanned downtime per year). But since we are going to use Intel x86, it seems the hardware stability is not so good as Sparc, but we don't have the detail data. So compare with Sparc, how about the stability of the Intel x86, should we assume we have more unplanned downtime? If so, how many, double? Where I can find some more detail of this two type of hardware?

  Read the article

• Cassandra on heterogeneous servers

  - by happy-coding

  I am currently running 4 cassandra nodes with the following hardware in a Apache Cassandra cluster: AMD Athlon 64 X2 6000+ 8G RAM 750G hard disk It shows not such a good writing performance and a really bad read performance with sometimes also timeouts. I was wondering if it makes sense to add 2 nodes with a different hardware (8 CPUs and more RAM) to improve this. Or does a cassandra cluster works best with the same hardware in every node? Thanks & best regards

  Read the article

• Insert Hyperlink via VBA

  - by Martin

  I have a Word VBA macro that loops through a directory and writes down the file path of files selected for some criteria into a new Word document. Works well as plain text (as part of a loop): wdDocResults.Content.InsertAfter objFile.Path & Chr(13) However, I'd like them to be hyperlinks. The following works as single macro, but when called from within another script, it does nothing at all (no matter if path is provided as variable or string, or as H:... or \\MyServernameAsNetDrive...): ActiveDocument.Hyperlinks.Add Anchor:=Selection.Range, Address:= objFile.Path, _ SubAddress:="", ScreenTip:="", TextToDisplay:=objFile.Path If try to select the current line in order to make sure something is selected at the right place -- error: out of memory": wrdDocResults.Content.InsertAfter objFil.Path Selection.Expand wdLine ActiveDocument.Hyperlinks.Add Anchor:=Selection.Range, Address:= objFile.Path, _ SubAddress:="", ScreenTip:="", TextToDisplay:=objFile.Path I also tried inserting a string resembling the Hyperlink field code ({ Hyperlink "..." }, which is of course not recognized... Any help is appreciated... Thanks in advance!

  Read the article

• What's the best scenario for using a wireless router with Comcast Business Class

  - by Buck

  Just had Comcast Business Class internet installed (usage details at bottom of post). During the call to order I asked about the hardware they'd be providing and was told it was a docsis 3 modem that I'd have to pay $7.00/month for. Figuring I'd have to buy a router anyway, I decided to get my own modem - a Surfboard SB6121 Docsis 3. I called in to tech support to ask some questions and learned that the modem they would have provided DID have a router built in. It's an SMCD3G-CCR. It's not wireless (we need wireless). The guy explained that it was better to have their hardware here because if there's a problem with our service and we're using our own hardware, chances are they'll blame it on our hardware and do nothing since they don't support it. He explained that I could still hang my own wireless router off their modem/router and if we ever had any service problems, we'd be able to plug directly into their hardware and they'd be able to tell where the problem is and they wouldn't be able to pawn it off onto "customer provided equipment". That all said, a few questions: 1. Am I better off returning my Surfboard modem and getting the Comcast one? If I get a wireless router and plug into one of the ethernet ports of the Comcast device, should I NOT plug anything else into the Comcast device since it would be a different network from anything connecting via the wireless router? Is that correct? Given that I know VERY LITTLE about networking and setting up hardware like this... since I need wireless and will HAVE to get a wireless router to work with this Comcast device, do I need to do anything with the settings of the Comcast device? Do I use security on the Comcast device or the wireless router or both? Any suggestions or anything I need to think about, given this scenario, in order to use a business-type voip service like RingCentral or Jive or Nextiva? Any recommendations on a wireless router for this scenario? We are running 2 PCs (possibly 3-4 in the future) - could be wired for the time being if needed but would prefer wireless; would like to have a networked hard drive and a networked printer; NEED business-type VOIP service asap for 2 phone lines. Would like to hook up some IP cameras at some point (but not the kind that require static IPs since I don't have one nor do I plan to pay Comcast another $15/month for one). I don't have or plan to have any type of web servers or anything like that. Want to use WPA or WPA2 security and take advantage of the NAT feature of the router for additional protection (that's the extent of my networking knowledge).

  Read the article

• Logging upload attempt with proftpd

  - by Amit Sonnenschein

  I have a logging server that i use with external hardware, the idea is that a special hardware is uploading logs about it's operation every few hours and from the server i can do whatever i need to do with the information, the old server was getting a bit too old and i've moved to a new one, i've install lamp,proftpd and ssh (just the same as i had on the old server). now for some reason the logs are not being uploaded and i don't know why. the hardware uses a direct ftp access - i've the proftpd.log and saw that the connection is not being rejected (just to make sure i didn't make a mistake with the user/pass) my problem is that for some reason the upload itself is failing... it might be due to wrong path (as it's hard coded in the hardware) but i can't really know as proftpd wont give me any details.. i've tried to change the loglevel to "debug" thinking it would give me more information but i don't see any change... is there any other way i can make sure proftpd logs EVERTHING ?

  Read the article

• Performance experiences for running Windows 7 on a Thin-Client?

  - by Peter Bernier

  Has anyone else tried installing Windows 7 on thin-client hardware? I'd be very interested to hear about other people's experiences and what sort of hardware tweaks they had to do to get it to work. (Yes, I realize this is completely unsupported.. half the fun of playing with machines and beta/RC versions is trying out unsupported scenarios. :) ) I managed to get Windows 7 installed on a modified Wyse 9450 Thin-Client and while the performance isn't great, it is usable, particularly as an RDP workstation. Before installing 7, I added another 256Mb of ram (512 total), a 60G laptop hard-drive and a PCI videocard to the 9450 (this was in order to increase the supported screen resolution). I basically did this in order to see whether or not it was possible to get 7 installed on such minimal hardware, and see what the performance would be. For a 550Mhz processor, I was reasonably impressed. I've been using the machine for RDP for the last couple of days and it actually seems slightly snappier than the default Windows XP embedded install (although this is more likely the result of the extra hardware). I'll be running some more tests later on as I'm curious to see particularl whether the streaming video performance will improve. I'd love to hear about anyone's experiences getting 7 to work on extremely low-powered hardware. Particularly any sort of tweaks that you've discovered in order to increase performance..

  Read the article

• In a virtual machine monitor such as VMware’s ESXi Server, how are shadow page tables implemented?

  - by ali01

  My understanding is that VMMs such as VMware's ESXi Server maintain shadow page tables to map virtual page addresses of guest operating systems directly to machine (hardware) addresses. I've been told that shadow page tables are then used directly by the processor's paging hardware to allow memory access in the VM to execute without translation overhead. I would like to understand a bit more about how the shadow page table mechanism works in a VMM. Is my high level understanding above correct? What kind of data structures are used in the implementation of shadow page tables? What is the flow of control from the guest operating system all the way to the hardware? How are memory access translations made for a guest operating system before its shadow page table is populated? How is page sharing supported? Short of straight up reading the source code of an open source VMM, what resources can I look into to learn more about hardware virtualization?

  Read the article

< Previous Page | 103 104 105 106 107 108 109 110 111 112 113 114  | Next Page >