Search Results

Search found 4715 results on 189 pages for 'ram bhat'.

Page 107/189 | < Previous Page | 103 104 105 106 107 108 109 110 111 112 113 114  | Next Page >

• Can my PowerMac G3 B&W really take a harddrive larger than 128GB?

  - by Josh Calvetti

  So it's a well known fact that the PowerMacs manufactured before 2002 cannot take a harddrive larger than 128GB. I have an old B&W that was running 10.4, and upon putting a 250GB drive inside, it told me that I had inserted a 128GB. That was expected. However, I recently decided to turn that machine into a Debian home file server. I shoved the 250GB drive inside, did some formatting, and now it tells me that it is a 250GB drive. Is this safe to use? Will all my data go corrupt after I've added more than 128GB of stuff? In case the specs are helpful to have, it's a 400MHz B&W, 1GB RAM, Rev. B.

  Read the article

• How low-power can a home server get?

  - by Halik

  I've got quite simple question actually. How green, low-power and efficient x86 home server can I build using consumer parts with rather constrained budget. After looking through some Google hits I've found out that system based on dual-core atom, some modest mITX board (gigabit lan, integrated audio and gfx etc), one RAM module and one 'green' WD HDD, powered by picoITX PSU uses about 30W at idle up to 40 at load. Can you get lower (or how much lower) then that? Maybe some VIA nano chips, or single core atom? My home server would take care of some back-upping mixed with little ftp/http traffic.

  Read the article

• Hyper-V Cluster with failover - NETWORKING

  - by Adam

  Hi We are looking to setup a 3 node Hyper-V cluster with live migration and failover using: 3 x Dell R710's with dual quad core Xeon & 128 GB RAM & 6 NICs in each 1 x Dell MD 3220i SAN We will be running this setup from a data center and so co-locating our kit. Can anybody explain how we should setup the network connections to make the system redundant? We have looked into this great article but are not sure how to get a 3 server setup correctly and reliably: http://faultbucket.ca/2011/01/hyper-v-failover-cluster-setup/. I believe we need network connections for: live migration, heartbeat, management, hyper-v etc. I assume as we are running it from a DC all IPs will have to be public IPs? Are AD servers will be VMs. One on each Hyper-V server and setup not to be HA.

  Read the article

• Memory cache Ubuntu 9.10 server x86 doesn't work as expected

  - by Matthijs

  We're using an Ubuntu 9.10 server to transfer Ghost-image files. We configured it only with Samba. And the DOS-clients connect to Samba. The latest updates are installed and so far the servers is running fine. When we image 10 pc's with the same image of 2 files of 2GB there's no disk activity. Everything is loaded in the RAM. There's 4GB in the server. But when we use 2 pc's with 2 different image files of 500 MB (8x) files then there's a lot of continuous disk activity. The speed is lower. So it seems that Ubuntu doesn't cache more then one big file. Are there settings to change this behaviour?

  Read the article

• Freebsd or Linux? as BGP router over 100mbps

  - by Yucong Sun

  I am building a server to act as a BGP border router for my 100mbps uplink in ISP. I needs these feature: 1) Dual stack BGP peering/routing (at least 100Mbps, maybe more). 2) Potential full internet BGP feed. 3) Some basic ACL functionality. The hardware is L3426/8G ram. NIC will be on-board dual port Broadcom 5716. I've worked with Linux extensively before and it seems to be able to handle 100mbps, but I heard FreeBSD is faster on networking stuff. Which one should I use? And do we have some performance benchmark numbers out there? Cheers.

  Read the article

• Slight network lag on Small Business Server 2008 R2

  - by Sir.Nathan Stassen

  I recently upgraded a network from a SBS 2003 server to a SBS 2008 R2 Server. Both I and users have noticed a slight delay in network applications and browsing network drives on the new server. It is minor, maybe a second or two at most. However I am wondering if anyone knows of anyway to optimize the networking to service requests sooner to the workstations. The network is running a 1 gig network with some 100 meg devices (mainly network printers). All workstations are XP SP3 Network software runs out of a shared folder mapped as a network drive, no sql databases. Server is a Dell Poweredge T610 with plenty of ram, cpu power, and storage.

  Read the article

• What kind of server do I need to handle 10 million requests and mySQL queries a day?

  - by Calvin

  I'm a new bie of server administration and I'm looking for a powerful hosting service to host my new website. This website is basically a back-end of an mobile online game, and it will: handle up to 10 million of HTTPS request and mySQL queries a day store up to 2000 GB file on the hard disk transfer probably 5000 GB data in and out per month it runs on PHP and mySQL have 10 million records in mySQL database, for each record there are 5-10 fields, around 100 bytes each I really don't know what kind of a server I need to handle these requirements, my question is: what cpu/ram do I need for a dedicated server or vps? what hosting companies are able to offer this kind of dedicated server or VPS? what about cloud computing? I've researched Amazon EC2 but it seems complicated to me. And I've contacted Rackspace but strangely they said Cloudsites is not suitable for my requirements. I wonder if there is other cloud hosting company. any other alternative method? thanks very much!

  Read the article

• How accurate is apache benchmark?

  - by matthewsteiner

  Alright, so I'm in development right now and I'd like to understand exactly how good the benchmarks are. I've just been using apache benchmark. Do they include the server sending the files? Also, is "requests per second" literally how many users can visit the page within one second? If it's at 30 requests per second, can literally 30 people be refreshing pages every second and the server will be fine? It seems like a lot to me. I know a lot of people get way better stats out of their servers, but I haven't done much optimization yet. Also, will increasing your ram increase you rps linearly? I have 512mb, so if I upgrade to 1gb, would that mean I'd get about 60 rps? How does concurrency affect your rps?

  Read the article

• dell u2410 3dMark Benchmark distortion problems

  - by Scanningcrew

  Ive been doing burn in testing for a new system I have put together and I am running into some video distortion problems with running the 3DMark benchmark tools (Both 06 and Vantage). The graphics will be fine, then sometimes during a test switch the screen will light up with thin horizontal ranibow lines (Something that looks very "glitchy") If i turn the monitor off and back on it clears up. All the tests "pass" and my system gets good marks but it concerns me if I might have problems with games (The screen returns to normal if I dont resest monitor and just let tests pass). I want to return a problem component now before its too late if it is something with the new hardware. Also, I am monitoring temp with thermal laser gun and the card itself is not going above 65c. Any ideas? System: Asrock x58 Xtreme - Last BIOS (1.80) EVGA Geforce GTX 285 w/ latest nvidia drivers (Connect via DVI1) Dell U2410(Set to 59hz refresh 1900x1202 -although I believe benchmarks run 1200x1024) Windows 7 Ultimate 64 12Gb DDR3 1600 RAM

  Read the article

• Virtualizing WindowsXP on Linux Fedora 12 for Photoshop....

  - by Rae

  I am running a Linux server from 2000, I have Fedora12 installed as the OS. I know you can virtualize Windows XP on the system to be able to run Windows programs, but the problem is I My server has only one 1333Mhz Pentium 3 processor and 1G of Ram. granted this is a pretty kick ass computer for the day, but lacking the second processor I'm afraid that I will not be able to run Windows virtualization to support Photoshop CS3. Is there any program out there that runs similar to Photoshop, like windows Digital Image suite 10, that will run smoothly in my Linux Fedora 12 environment? or can I virtualize windows and run the Windows digital image suite 10, without slowing or corrupting my system?

  Read the article

• Looking for Linux text editor

  - by Daniel

  I'm looking for VIM replacement. My key points are: Extensible in sane language (such as Python, Ruby, or even Lua, after vimscript everything will do). Also GUI part should be extensible too, so no SublimeText2. GUI. Preferrably GTK+. Lightweight. I don't understand IDEs like Eclipse/NetBeans consuming up to 1G of RAM. File browser panel. Splits, tabs and windows. There should be ability to split views tabs infinite number of times (or while they fit to screen). VCS support (optional: especially Git) Snippets & autocompletion (not mandatory, but I would very love to have those) Any ideas?

  Read the article

• How to enable Hardware-assisted decoding in Ubuntu 9.10, specifically for Totem and/or Gnome MPlayer

  - by techtechmo

  Hi all, just wanted to ask about Hardware-assisted 720p video playback on an Intel Atom D510 machine, running on Ubuntu 9.10 Karmic Koala. When I use Boxee with Hardware Assisted Decoding activated, I am able to play 720p videos -- whether on the local harddisk drive or on a remote server, through LAN. However when I play the same 720p videos through Totem or through Gnome MPlayer, the resulting playback suffers from stuttering and slideshow-like slowdowns. Would it be possible to make 720p video playback on Totem and Gnome MPlayer more smooth given that my machine's processor in the Intel Atom D510? If yes, how? Boxee seems to manage, so I assume it should also be possible to tweak Totem and/or Gnome MPlayer to be able to do the same. As an added note, I the machine's OS is Linux Mint 8. Installed RAM is 2GB.

  Read the article

• Recommended CPU upgrade for Dell Vostro 220 with E7300 processor?

  - by Justin Grant

  I've got a Dell Vostro 220 with an E7300 processor (Intel Core 2 Duo @ 2.66Mhz, LGA775 socket) and I'm thinking about upgrading my processor so I can run Windows Server 2008 R2 with Hyper-V, which requires Hardware Virtualization support in the processor. Yes, I know this is underpowered for a server, I'm actually using it as a desktop machine but I'd like to use Hyper-V instead of Virtual Server (which I'm using now for running VMs). I'd like to keep the same motherboard and ideally the same CPU fan and RAM too. Any suggestions for a good, relatively cheap (under $200) processor upgrade?

  Read the article

• MAC OS for Intel based PCs

  - by Maven

  I have an Intel dual core PC with 4GB of RAM and Graphics card. For on of my student Assignment I need to install Latest possible MAC OS on my system as a secondary OS. Like on boot it asks me that which OS i want to boot with Win 8.1 or Mac Os.. I searched on the internet and found two conflicting opinion some people said there are few MAC OS Version which can be directly installed on Intel PCs some says there aren't? I am here to get rid of the confusion that is an official latest possible MAC OS version for Intel based PCs? If not what are my options if I want to run MAC OS on my PC. Please not that Virtualization options won’t work for me, it has to be working as full OS not an os inside another.

  Read the article

• Unable to run VMs on hyper-v

  - by PRAWAT-DS

  Folks/Mates, I need some advise and assistance regarding the testing of Hyper-V. Here is my h/ware configuration: 1) Intel i5 processor (i5-750) 2) Intel M/B DP55WB 3) 6 GB DDR3 RAM OS = Server 2008 R2 Standart (evaluation copy). I installed 2008 r2 on my machine and added hyper-v role to it. I created 2 VMs and installed OS. But after finishing the OS installation the VMs are not booting up. After finishing the OS installation, the VM reboots automatically (normal behaviour) and shows "preparing your system for first time" after that it reboots and didn't come online. Few things to notice, when I am running "securable" on my server 2008 R2 OS it shows that processor is not supporting h/ware virtulization, but (since my desktop is dual boot) when I am running "securable" on my windows 7 OS, it shows that process "does" supports hardware virtulization. VT option is already enabled in BIOS. Any help and suggestions are highly appreciated :) Thanks in advance. Pradeep Rawat

  Read the article

• serving static assets via http is really slow compared to sshfs (apache2/nginx)

  - by s1lv3r

  After migrating to a new VPS I had some users complaining about slow loading images on their sites. After creating some test files with dd I realized that I can download all files via sshfs with full speed while downloads via web are painfully slow. The larger the file is and the longer the transfer takes, the slower the transfer speed gets. I thought I had some problems with Apache and just spend the whole evening with replacing Apache2 against nginx for static file serving - with no effect at all. No I/O wait states in top. Tons of RAM free, no high CPU utilization and hdparm shows a decent I/O performance at all times. I just have no idea anymore, what's happening on this server. This is a link to a demo file: http://master.dealux.de/file.tgz Anybody an idea what I can check out?

  Read the article

• Linux cron spamming me then stops about php/suhosin

  - by acidzombie24

  My server emails me when any messages goes to root. cron sends me messages. Today I got over 300 emails from my server all of which are PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20090626+lfs/suhosin.so' - /usr/lib/php5/20090626+lfs/suhosin.so: cannot open shared object file: No such file or directory in Unknown on line 0 I have no idea why. I went to debug it however 5hours ago it stopped so theres nothing i could look at except maybe logs. Why did this maybe happen? Disk isn't full and I have enough ram available.

  Read the article

• Shared SQL Server 2008

  - by nazaf

  Hi, I have a Windows Hyper VPS plan with 1024 MB of RAM. After installing SQL Server 2008 Express, my memory usage went up to 75% without running my site yet. I know that SQL Server consumes a lot of memory, so I decided to host my DB on a shared server. Which of the following is more scalable: install my DB on my VPS, or on a shared server ? If the latter, then can you recommend me a good shared server? Thanks.

  Read the article

• A good Linux alternative to Ubuntu for a working environment.

  - by Roozak

  Hi, Im running a decent laptop with 3GB ram and 2GHz Core Duo. I use it mainly for working which requires several SSH and SFTP connections to servers and running a VM most of the time. Nothing much more intensive than that. I like using Ubuntu 9.10 however I have the issue of Nautilus and the top/bottom menus freezing up on me constantly - dare I say it, alot more problems than when I was using Windows Vista. Im just looking for recommendations of other operating systems which would be suitable for the task. Thanks

  Read the article

• Vista: Improving troubleshoot approach skills

  - by Chau

  I'm not a Windows SuperUser, but neither just the regular user. I don't mind browsing the Registry, using Process Explorer, reading the Event logs, (un)installing new drivers and so on, but all this only makes me solve some problems. I tend though to run into problems where these tools aren't enough. Which tools should I learn about to improve my troubleshooting skills in Windows? Currently I'm using Windows Vista x64 (not moved to 7 yet), facing audio/video stuttering problems and I think this is a good place to improve my troubleshooting skills. I know this post is similar to this question, but my machine is only hanging occationally. Specs: Intel Q6600 Stock speed ASUS P5QD Turbo 4GB ram NVIDIA GTS-8800 640 HDA Xplosion 7.1 Seasonic 430W Windows Vista Business x64

  Read the article

• Post Error, Fixed/Removable Media Error

  - by Dan

  Hi, I really do not know what I am missing here. I ordered parts for a new server. The board is an Intel s3420GP. From the diagnostic LEDs I get the error message: 0xB1h which corresponds to "Fixed Media: Disabling fixed media" and 0xB8h which corresponds to "Removable Media: Resetting removable media device." I can not for the life of me figure out what it is talking about. I have two identical motherboards and both gave the error message. I don't have a second CPU yet, so I can't test that. There are no beeps or anything. It seems the server resets every 10 seconds or so (the speaker does work, I put the RAM in the wrong slots on purpose to test this out, and the correct error POST code came up) Please help me, I'm not sure where else to turn or to ask

  Read the article

• Graphics Startup Screen

  - by Wesley

  Specs: AMD Athlon XP 2400+ @ 1987 MHz / 2x 512MB PC3200 DDR RAM / 160GB IDE HDD / 128MB GeForce 6200 AGP / FIC AM37 / Windows XP Pro SP3 So, every time I start up my machine, there's a startup screen for the graphics card. It should display "NVIDIA GeForce 6200 VGA BIOS" with some other copyright information underneath it. However, it randomly changed to say "NV44A VGA BIOS." I think the GeForce 6200 codename is NV44A or something, but is there someway to change it back to say "GeForce 6200 VGA BIOS" or, if not, to completely stop it from showing upon startup? (Graphics drivers are all up to date.) Thanks in advance.

  Read the article

• HD movies stutter.

  - by Absolute0

  I just put together a new system build in the hopes that all of my daily tasks would run smoothly and without any hiccups. Unfortunately I am still seeing some sound and sometimes video stuttering when playing HD movies in VLC (no problems with xvid/divx files). My setup is as follows: Intel core i5 750 quad core 2.66mhz 4GB ram asus p55 motherboard radeon hd 5570 video card 650gb 7200rpm western digital sata HDD 23" Nec ea23wmi monitor Operating System: Windows 7 What might be the main bottleneck that needs upgrading to fix my delays? Seems like the hard drive might be the problem but anything faster than 7200rpm is beyond my budget for a decent hard drive. Could it be anything else?

  Read the article

• Getting BootMgr not found errors repeatedly on Win7 x64

  - by abszero

  So here is the basic configuration of the box: Primary RAID 1 (Mirror, Bootable): 2x 300GB WD SATA drives AMD Phenom Quad Core x64 @2.2 ASUS M3N78 Pro Board 4GB RAM Win 7 Ultimate Additionally, this box is a Host OS for several CentOS Boxes via VirtualBox. The box runs like a champ but, for whatever reason, everytime I restart the machine I get a BootMgr not found error when the box tries to boot. I pop in my Win DVD, select 'Repair Windows' then 'Fix Start Up Problems' and everything works fine...once. When I restart the box again I have to go back through this process. Any ideas on what is going on?

  Read the article

• bash process uses 90% CPU, comes back on computer restart

  - by Sano

  I’ve replaced the old HDD of my late 2008 unibody MacBook (8 GB of RAM, running OS X 10.7.4) with an OCZ Vertex 3 SSD. After doing this, I've installed Lion and restored my data from a Time Machine backup. Everything is fine, except for a process named “bash” that permanently uses about 90 % CPU. If I kill it via Activity Monitor, everything goes back to normal, but unfortunately the process comes back every time I restart the computer. I've tried do zap the PRAM, reinstall 10.7.4 from the combo package, and even simply wait for more than 2 hours, but the problem is still here.

  Read the article

< Previous Page | 103 104 105 106 107 108 109 110 111 112 113 114  | Next Page >