Search Results

Search found 25959 results on 1039 pages for 'remote support'.

Page 107/1039 | < Previous Page | 103 104 105 106 107 108 109 110 111 112 113 114  | Next Page >

  • How to Route Traffic in Case PPTP Remote Client is on Same Subnet as Server

    - by Marcus Cole
    I've a PPTP server setup on my local home network (192.168.1.0/24, pfSense). Now sometimes when I'm away and want to connect remotely my client (Windows 7) is also on the same network because e.g. the hotel has set it up the same way. Thus the connection works, but I can't reach any PC on my home network because everything is routed directly to the client local router which is in the same subnet. Is there a way to work around this by messing with a configuration or adapting Windows routing table, i.e. without modifying either network?

    Read the article

  • How to enable remote device manager?

    - by Petoj
    I have a hyper-v-server-2012-r2 Core server thats not joined to any domain. What configuration must i do on the server and client to connect with MMC \ Device Manager? I have managed to connect with the Computer Management to the server and i can access every thing in there but the device manager (and a few more that im not interested in)... When i click the Device manager i get the following error: I have checked and both services are running.. If possible i would like a step by step guide what to do on a freshly installed Hyper-v Core server to get every thing in Computer Management remotely accessible including Device Manager.

    Read the article

  • csync2 ERROR: Connection to remote host failed

    - by Emil Salama
    I was unable to find any articles to answer this question, so my best bet was to post this here: Scenario We have 2x application servers in production hosting a PHP website and I would like some folders to be syncronized between the 2, the same was setup for the development environment with no issues, I've followed all instructions from the URL "http://www.cloudedify.com/synchronising-files-in-cloud-with-csync2/", I still seem to have the same result, firewall has been disabled on both boxes for troubeshooting purposes: Config Files: cysnc2.cfg nossl * *; group production { host server1; host server2; key /etc/csync-production-group.key; include /etc/httpd/sites-available; include /xxxxxx/public_html/files include /xxxxxxx/magento/media/catalog/product include /xxxxxxx/magento/media/brands exclude *.log; exclude /xxxx/public_html/file/cache; exclude /xxxxx/public_html/magento/var/cache; exclude /xxxx/public_html/logs; exclude /xxxxx/public_html/magento/var/log; backup-directory /data/sync-conflicts/; backup-generations 2; auto younger; } /etc/xinetd.d/csync2 csync2.cfg service csync2 { disable = no flags = REUSE socket_type = stream wait = no user = root group = root server = /usr/sbin/csync2 server_args = -i -D /data/sync-db/ port = 30865 type = UNLISTED log_type = FILE /data/logs/csync2/csync2-xinetd.log log_on_failure += USERID } I've made sure that the daemon is listening on both server on port 30865 and the keys matched on both servers I've run a tcpdump on each server, output as follows: 12:20:31.366771 IP server1.49919 server2.csync2: Flags [S], seq 445156159, win 14600, options [mss 1460,sackOK,TS val 794864936 ecr 0,nop,wscale 7], length 0 12:20:31.366810 IP server2.csync2 server1.49919: Flags [S.], seq 450593575, ack 445156160, win 14480, options [mss 1460,sackOK,TS val 794798911 ecr 794864936,nop,wscale 7], length 0 12:20:31.367101 IP server1.49919 server2.csync2: Flags [.], ack 1, win 115, options [nop,nop,TS val 794864937 ecr 794798911], length 0 12:20:31.367138 IP server1.49919 server2.csync2: Flags [P.], seq 1:9, ack 1, win 115, options [nop,nop,TS val 794864937 ecr 794798911], length 8 12:20:31.367147 IP server2.csync2 server1.49919: Flags [.], ack 9, win 114, options [nop,nop,TS val 794798912 ecr 794864937], length 0 12:20:31.368625 IP server2.csync2 server1.49919: Flags [R.], seq 1, ack 9, win 114, options [nop,nop,TS val 794798913 ecr 794864937], length 0 Is there anything else i'm missing or should be doing?

    Read the article

  • VLAN support on Juniper EX - 2200 switches

    - by liv2hak
    I have 6 Juniper switches (EX - 2200) connected to each other as shown in the network topology below. I have two PC's that I am using PC1 - (used for configuring the 6 switches via minicom) PC2 - to monitor the traffic between the switches via the Ports that are marked with arrows in the diagram. STEP 1: I create a new vlan On Switch 3 (SW3) that includes Port 12 and Port 22. I also assign l3-interface to the vlan (vlan_2) with ip address - 192.168.1.7. Now I plug-in Port 0 of Switch 3 on PC2. Now I try pinging 192.168.1.7 from PC2 (192.168.1.10) I want to know what will happen? My postulation is that I will not be able to ping SW3 from PC2.This is because SW3 (Port 12 and Port 22) is a part of a vlan_2 and vlan_2 logically breaks up broadcast domains and so 192.168.1.7 will not be reachable from 192.168.1.10. Now I have an l3-interface on SW1 with IP 192.168.1.1 using default vlan( vlan-id 0). Similarly I have enabled IP on SW2 - 192.168.1.2 SW3 - 192.168.1.3 SW4 - 192.168.1.4 SW5 - 192.168.1.5 SW6 - 192.168.1.6 all using default vlan. Now I plug in Port 12 of SW3 (blue cable) into the PC2. I try to ping 192.168.1.1 from PC2. What will happen at this stage.? My postulation is that I will be able to ping switch 1.Is this correct? Also another question is that can a single port on a Switch be added multiple VLANS? I am a beginner at network configuration? Any help would be highly appreciated. (Please ignore the CISCO symbol on the switches in the diagram.All swithes are Junper EX 22-00.)

    Read the article

  • Processor with higher FSB than motherboard can support.

    - by Wesley
    Hi all, Please redirect me if there is a similar question, but I have an ECS P4VXASD2+ (V5.0) motherboard, which supports a 533 MHz FSB. I want to put in a Pentium 4 3.2 GHz processor (Socket 478) with an FSB of 800 MHz. Would this be possible? Would the FSB of the processor just be limited to 533 MHz? Thanks in advance.

    Read the article

  • Using a cell phone as a PC remote control

    - by Mahmoud Hossam
    I have a sony ericsson phone that can control any PC using bluetooth, as long as it has permission to do so, of course. It doesn't require any server software of any kind, it just works out of the box with any PC (or mac) that is bluetooth enabled. Is there any program I could use that has the same functionality? I don't want to install anything on the PC, I just want to be able to use the program installed on the phone. I prefer Java ME/Android/Symbian apps, I don't have an iPhone.

    Read the article

  • Ubuntu 9.10 Samba NT_STATUS_CONNECTION_REFUSED errors on remote machines.

    - by user40730
    SAMBA I'm running Samba on Ubuntu 9.10 on a MacBook Pro using Parallels. When I run the smbtree command, I get the following errors: peterv@MBP17U<2005$: sudo smbtree Enter root's password: session request to 192.168.1.156 failed (Called name not present) HADEN \SERVER2 cli_start_connection: failed to connect to SERVER2<20 (0.0.0.0). Error NT_STATUS_CONNECTION_REFUSED \MBP17WIN MBP17win cli_start_connection: failed to connect to MBP17WIN<20 (0.0.0.0). Error NT_STATUS_CONNECTION_REFUSED \MBP17U \MBP17U\IPC$ IPC Service () \MBP17U\Perl \MBP17U\Home \MBP17U\print$ \MBP17 MBP17 cli_start_connection: failed to connect to MBP17<20 (0.0.0.0). Error NT_STATUS_CONNECTION_REFUSED Fri Apr 16 05:24:47 EDT 2010 The MBP17 failure is an OS X system, the SERVER2 failure is a Windows XP system. Running testparm shows no errors. Can someone please help me out?

    Read the article

  • Save Remote SSL Certificate via Linux Command Line

    - by Jim
    Can you think of any linux command-line method for saving the certificate presented by a HTTPS server? Something along the lines of having curl/wget/openssl make a SSL connection and save the cert rather than the HTTP response content. The gui equivalent to what I'm looking for would be to browse to the HTTPS site, double-click on the browser "secure site" icon, and export the cert. Except the goal here is to do it non-interactively. Thanks, Jim

    Read the article

  • Security permissions for remote shared folders

    - by Tomas Lycken
    I have two servers running Windows Server 2003, and I want copy files from one server (A), programmatically with a windows service running under the Local System account, to a shared folder on the other (B). I keep getting "access denied" errors, and I can't figure out what security settings I need to set to open the shared folder for writing. This is what I've done on the recieving end: On A, right-click on the folder to share, choose the tab "Sharing" and select "Share this folder". Set a share name. Click "Permissions", add the group "Everyone" and give it full control. I tried choosing the "Security" tab to give some permissions there as well, but the "Add" dialog only finds local users, despite the fact that B shows up in the "Workgroup computers" dialog. After further inspection, this is the case also for the "Permissions" dialog under the "Sharing" tab (are they the same?).

    Read the article

  • does ipad support voice recording???

    - by Abdullah Waseer
    Hi, i have made an application in iphone which supports video recording and i want it to launch on iPad too but currently i dont know whether ipad device supports voice recording or not. can anyone please tell me whether IPAD SUPPORTS VOICE RECORDING??? thanks...

    Read the article

  • SCCM 2012 - some remote clients unable to download some applications, 401.2 error

    - by growse
    I've got a small SCCM 2012 deployment with about 35 clients attached. Most of these clients are in the same network as the single SCCM host, but three are about 1000 miles away. Oddly, these three clients have stopped being able to download some application packages over BITS. Publishing a new package works for all the other clients, but for these three it never seems to download. If I go to the software centre, it just hangs at "0% downloaded". On the client, the DataTransfer.log says (repeatedly): CDTSJob::HandleErrors: DTS Job '{2DCBBB4C-6D84-479A-9218-885B72C834B9}' BITS Job '{E78147DD-4A26-4942-B4FD-6EC3EB77EECD}' under user 'S-1-5-18' OldErrorCount 442 NewErrorCount 443 ErrorCode 0x80072EE2 DataTransferService 30/07/2012 09:27:41 2964 (0x0B94) CDTSJob::HandleErrors: DTS Job ID='{2DCBBB4C-6D84-479A-9218-885B72C834B9}' URL='http://sccm-host:80/SMS_DP_SMSPKG$/Content_3e7f6982-6346-4f27-ae00-ad5dcb391455.1' ProtType=1 DataTransferService 30/07/2012 09:27:41 2964 (0x0B94) Cas.log says (repeatedly): Location update from CTM for content Content_3e7f6982-6346-4f27-ae00-ad5dcb391455.1 and request {AD041FCB-03D2-4FE6-A6FA-38A6B80FB2A1} ContentAccess 30/07/2012 08:33:39 5048 (0x13B8) Download location found 0 - http://lonsbrndsccm02.mcs.int.thomsonreuters.com/SMS_DP_SMSPKG$/Content_3e7f6982-6346-4f27-ae00-ad5dcb391455.1 ContentAccess 30/07/2012 08:33:39 5048 (0x13B8) Download request only, ignoring location update ContentAccess 30/07/2012 08:33:39 5048 (0x13B8) On the server, I've enabled failed request log tracing. The raw IIS log says the following: 2012-07-30 08:28:42 10.13.111.35 GET /SMS_DP_SMSPKG$/Content_3e7f6982-6346-4f27-ae00-ad5dcb391455.1/sccm /NSCP-0.4.0.172-x64.msi 80 - 10.2.27.19 Microsoft+BITS/7.5 401 2 5 293 Which is a 401.2 error, meaning access denied. The failed request log is large, but the punchline is that it chucks out a Unauthorized: Access is denied due to invalid credentials. message. All clients are members of the same domain and appear to be (otherwise) working great. I've re-installed the SCCM client, deleted and re-added the computer to SCCM. Some other packages seem to work fine, the daily anti-malware delta gets downloaded and patched without issue. Why are these packages failing?

    Read the article

  • SSH: Tunnel multiple ports to remote server

    - by user1594322
    See attached diagram. Host A - Windows server Host B - Linux server Host C - VMWare ESXi server From host A I can SSH to host B over the VPN tunnel. I can ping host C from host B, but not from host A. I am assuming this is because host C has lost its default gateway. Host C is a VMWware ESXi server, so I would need to tunnel several ports (80,443,902) in order to reach host C from host A. What is the correct ssh syntax to create the tunnel in order to reach host C from host A, and can I do it using a single command, or do I need to run three commands (one for each port, 80,443,902)?

    Read the article

  • Remote NX login to Ubuntu, Gnome can't mount CD/DVD drive

    - by T.J. Crowder
    Even though I'm sitting next to it, I log into my Ubuntu 10.04 LTS system via NX Free Edition from another system at the moment (this is temporary, not worth buying a KVM for). Curiously, though, when I do that Gnome's auto-mounting fails for CD/DVD media (I haven't tried other kinds) with a "Not Authorized" error. For instance here's what happens when I put the Ubuntu 10.04 LTS installation CD in: This does not happen if I log into it locally (not via NX) with the same user account. When using NX, I can mount the media if I go to mount directly: tjc@midnight:~$ sudo mkdir /media/dvd tjc@midnight:~$ sudo mount -r -t iso9660 /dev/sr0 /media/dvd tjc@midnight:~$ ls /media/dvd autorun.inf casper dists install isolinux md5sum.txt pics pool preseed README.diskdefines ubuntu wubi.exe ...which, along with the "not authorized" error, suggests some kind of permissions problem to me (doh). What I find odd is that the same user is involved in both cases (local and via NX). I'm new to Ubuntu on the desktop (used it and other distros on servers for years), so I'm afraid I don't know how this auto-mounting is happening. I think it's handled by the gvfs package and its daemon, but that's about as far as I got (and perhaps I've taken a left turn even getting that far). Although I can work around it with mount, does anyone know how I might get auto-mounting to work?

    Read the article

  • Remote RAID Control ESXi Dell PowerEdge 2950 OpenManage

    - by yoyomommy
    I was wondering how one can add a drive into an existing RAID array while ESXi is still running. I have read that you are able to use Dell OpenManage to do this. I have installed OMSA 7.0 on the VMWare ESXi host (5.0 and fully updated) and I've installed OpenManage Essentials on a Windows Server 2008 R2 guest. The issue that I'm having is that OpenManage is unable to see my RAID controller. I have seen videos and photos as parts of guides on how to do this online, so I would assume that the functionality exists and I just have it set up wrong.

    Read the article

  • Application losing Printer within Terminal Services for remote users

    - by Richard
    Question: What I need to do is have a permanent link to a printer, normally only accessible through Terminal Services (Printer Redirect), to allow Sage Line 50 layouts to see that printer persistently, even after users have disconnected and reconnected to the Terminal Services session? Although the printer is accessible each time a user connects to the Sage Server via Terminal Services, it is given a different session number and therefore the Sage Layout sees it as a different printer. History behind question: Users using Terminal Services connecting to a Sage Server on a different site Using Sage Line 50 v 15 on that Server Users want to print invoices (sage layouts) locally Sage Server cannot see the users local printers, to get around this user uses the Print redirect features of Terminal Services The individual reports can be edited to point to a specific printer by default. This means the user just has to select an invoice and click print, then select the layout/report wanted and it auto prints that invoice to the default printer specified. The problem occurs because the layouts are edited to point to the users local printer "Ricoh 1018d (session#)", note the "(session#)" as this is the users local printer being redirected through the terminal services session. Users are able to print using the sage layouts once the default printer is setup within the layout and saved, but as soon as the users disconnects from the Terminal Services session and then reconnect in the morning go to print, it has lost the connection to that printer. I understand why its failed, because that the printer is on a per session basis and the layout would not be able to hold on to the connection from a previous session. Thanks in advance for any assistance...

    Read the article

  • Cassandra Remote Connection

    - by Lyuben Todorov
    I'm not managing to connect to cassandra from outside machines. The database is hosted on a windows machine and im trying to connect through a mac (but this shouldn't cause problems) Local connection works: C:\cassandra\bin>cassandra-cli Starting Cassandra Client Connected to: "Test Cluster" on 127.0.0.1/9160 Welcome to Cassandra CLI version 1.1.6 But fails from other machines on the same network bin/cassandra-cli --host 192.168.0.10 --port 9160 org.apache.thrift.transport.TTransportException: java.net.ConnectException: Operation timed out at org.apache.thrift.transport.TSocket.open(TSocket.java:183) at org.apache.thrift.transport.TFramedTransport.open(TFramedTransport.java:81) at org.apache.cassandra.cli.CliMain.connect(CliMain.java:70) at org.apache.cassandra.cli.CliMain.main(CliMain.java:246) Exception connecting to 192.168.0.10/9160. Reason: Operation timed out. Welcome to Cassandra CLI version 1.2.0-beta3 Type 'help;' or '?' for help. Type 'quit;' or 'exit;' to quit. There is a router on the network but these ports have been triggred Ports: 1024, 7000, 7001, 7199, 9160 And the same ports were forwarded to 192.168.0.10 (where Cassandra is hosted) Cassandra version is 1.0.7 And the settings I think i need to change in cassandra.yaml listen_address: 192.168.0.10 rpc_address: I'm not really sure if I've missed any steps. Any help would be appreciated.

    Read the article

  • IIS6 Virtual Directory 500 Error on Remote Share

    - by David
    We have our servers at the server farm in a domain. Let's call it LIVE. Our developer computers live in a completely separate corporate domain, miles and miles away. Let's call it CORP. We have a large central storage unit (unix) that houses images and other media needed by many webservers in the server farm. The IIS application pools run as (let's say) LIVE\MediaUser and use those credentials to connect to a central storage share as a virtual directory, retrieve the images, and serve them as if they were local on each server. The problem is in development. On my development machine. I log in as CORP\MyName. My IIS 6 application pool runs as Network Service. I can't run it as a user from the LIVE domain because my machine isn't (and can not be) joined to that domain. I try to create a virtual directory, point it to the same network directory, click Connect As, uncheck the "Always use the authenticated user's credentials when validating access to the network directory" checkbox so that I can enter the login info, enter the credentails for LIVE\MediaUser, click OK, verify the password, etc. This doesn't work. I get "HTTP Error 500 - Internal server error" from IIS. The IIS log file reports sc-status = 500, sc-substatus = 16, and sc-win32-status = 1326. The documentation says this means "UNC authorization credentials are incorrect" and the Win32 status means "Logon failure: unknown user name or bad password." This would be all and good if it were anywhere close to accurate. I double- and trouble-checked it. Tried multiple known good logins. The IIS manager allows me to view the file tree in its window, it's only the browser that kicks me out. I even tried going to the virtual directory's Directory Security tab, and under Authentication and Access Control, I tried using the same LIVE domain username for the anonymous access credential. No luck. I'm not trying to run any ASP, ASP.NET, or other dynamic anything out of the virtual directory. I just want IIS to be able to load static images, css, and js files. If anyone has some bright ideas I would be most appreciative!

    Read the article

  • Backup server (OSX) like time machine to backup remote ubuntu 12.04 server [on hold]

    - by Mad
    I've searched my ass of for an good solution to backup my ubuntu server thats in a datacenter. Local we have an osx server with some external drives attached to it. This is for the local working stations that handle timemachine. What i like to do is fetch the files (or mount the root of my ubuntu server) and make an time machine backup from it. I just have one problem that if my osx server crashes i can't put back the system because it contains not only the osx server but also the ubuntu server from the data center. I've used Back in time on ubuntu to do the exact same thing but this was to Ubuntu (local) from Ubuntu (datacenter). So does anybody has an solution? Here are my requirements: Set time intervals for backups; need to be backed up nightly. Set time intervals for keeping backups; hourly, weekly, monthy etc Able to back up all computers and servers from an offsite location the local osx server (10.9). Manageable from that one location to login with ssh to do rsync or rsnapshot Has a GUI (osx) Act like time machine, backup only the files that has been changed. Restore to a point back in time.

    Read the article

  • Cross platform support for network attached USB hubs?

    - by larsks
    I am looking at network-attached USB hubs in order to run licensed software in a virtualized environment when hardware dongles are required. Are there any solutions that will work with both Linux and Windows? Most of the dedicated devices -- such as the Zonet ZUH2214 or the (oddly expensive) Digi AnywherUSB/2 -- appear to be Windows-only. Linux has the the USB/IP project, for which there appear to be Windows drivers, but the last "News" post on the site was in 2007, so I'm not entirely confident about the viability of the project. Has anyone out there found a solution that will work well in both environments?

    Read the article

  • Looking for a help desk ticketing system..

    - by Dan
    Hi guys Im looking for a good help desk ticket solution. It must perform the following actions for it to be useful. It needs to have a single point of contact via email..e.g [email protected] If we recieve a telephone(or an email outside of the system) we need to be able to create a ticket as if had been added via the single point of contact, this needs to be done with ease in order to save time. Certain people within our organisation deal with certain customers, so if the email/ custom input support call as mentioned in bullet 2 is picked up as having a relationship with that certain person in our organisation it needs to be sent to them/put in their queue for them to work on. If a person is out of office or sick any tickets sent to them must be forwarded to somebody else or put into a seperate pool of tickets that anybody can access. Perhaps have an agent that sorts through tickets in the pool and assigns them to anybody who is available, preferably the person with fewest tickets in their queue/list. Once a customer emails and the system logs it they immediately get a response with a ticket number and maybe details of who is dealing with the problem. Any correspondance in relation to a particular ticket is automatically grouped into some sort of message, and not made into a load of separate tickets. I.e system scans incoming email subjects for ticket numbers and assosciates it with exisiting tickets if that number exists. Any help is much appreciated Thanks P.S I have taken a look at OTRS but i'm not feeling it so unless someone can convince me I guess i'm after an alternative.

    Read the article

  • Wamp virtualhost with supporting of remote access

    - by Farid
    To cut the long story short, I've setup a Wamp server with local virtual host for domain like sample.dev, now I've bind my static IP and port 80 to my Apache and asked the client to make some changes in his hosts file and add x.x.x.x sample.dev , I've also configured my httpd virtual host like this : <VirtualHost *:80> ServerAlias sample.dev DocumentRoot 'webroot_directory' </VirtualHost> Client can reach to my web server using the direct access by ip address, but when he tries using the sample domain looks like he gets in to some infinite loop. The firewall is off too. What would be the problem?! Thanks.

    Read the article

  • Dual Monitor support rdp 7 to win 7 on esxi

    - by rphilli5
    I am trying to RDP from a Windows 7 Professional dual monitor physical machine to a Windows 7 Professional VM hosted on esxi 4.0. I can get the spanning option to work to both monitors, but I have tried 3 different methods of connecting but have not been able to use true multiple monitors. At different times, I tried checking the "use all monitors" option, command line mstsc /multimon and added the line use multimon:i:1 to the .rdp file. None of these worked. Any ideas? The physical machine can connect to other Windows 7 physical machines with true multi monitor access. I also have the same issue when going from a 32bit RC1 machine to a Windows 7 Professional x64, but not when going in the reverse direction. Here's the .rdp: screen mode id:i:2 use multimon:i:1 desktopwidth:i:1440 desktopheight:i:900 session bpp:i:16 winposstr:s:0,1,341,118,1139,568 compression:i:1 keyboardhook:i:2 audiocapturemode:i:0 videoplaybackmode:i:1 connection type:i:1 displayconnectionbar:i:1 disable wallpaper:i:1 allow font smoothing:i:0 allow desktop composition:i:0 disable full window drag:i:1 disable menu anims:i:1 disable themes:i:1 disable cursor setting:i:0 bitmapcachepersistenable:i:1 full address:s:192.168.1.5 audiomode:i:0 redirectprinters:i:1 redirectcomports:i:0 redirectsmartcards:i:1 redirectclipboard:i:1 redirectposdevices:i:0 redirectdirectx:i:1 autoreconnection enabled:i:1 authentication level:i:2 prompt for credentials:i:0 negotiate security layer:i:1 remoteapplicationmode:i:0 alternate shell:s: shell working directory:s: gatewayhostname:s: gatewayusagemethod:i:4 gatewaycredentialssource:i:4 gatewayprofileusagemethod:i:0 promptcredentialonce:i:1 use redirection server name:i:0 drivestoredirect:s:

    Read the article

  • Clone remote CentOS server to local test server?

    - by dannymcc
    We have a dedicated server running ContOS 5.5. The server runs our Magento store and a basic php website with mysql. I have a spare rack server in my office (HP ProLiant DL360 G4) that has more than enough storage space to store a duplicate of our dedicated server. I would like to clone the dedicated server entirely and have a local duplicate. It wouldn't need to be kept in sync because I can do that with GIT. The reason I want to do this is simple; learn more about the dedicated server and CentOS. Is this possible? I have SSH access to the dedicated server and obviously complete access to the local server.

    Read the article

  • Remote backup with Amazon S3

    - by mjr
    Does anyone know of some good Mac software to sync a network attached storage device or a drobo to Amazon S3? I'd love to mail them a storage device for the first dump and then do nightly syncs.

    Read the article

  • Does PF support divert like IPFW?

    - by Massimiliano Torromeo
    Hi, I'm currently using IPFW on 3 dedicated firewall servers, and I would like to convert them to PF for some of its functionalities, but I need divert to work. Specifically I am teeing packets to a custom application for network analysis purposes. Is it (or something similar) supported in PF?

    Read the article

< Previous Page | 103 104 105 106 107 108 109 110 111 112 113 114  | Next Page >