Search Results

Search found 5727 results on 230 pages for 'routed commands'.

Page 107/230 | < Previous Page | 103 104 105 106 107 108 109 110 111 112 113 114  | Next Page >

  • nginx reverse ssl proxy with multiple subdomains

    - by BrianM
    I'm trying to locate a high level configuration example for my current situation. We have a wildcard SSL certificate for multiple subdomains which are on several internal IIS servers. site1.example.com (X.X.X.194) -> IISServer01:8081 site2.example.com (X.X.X.194) -> IISServer01:8082 site3.example.com (X.X.X.194) -> IISServer02:8083 I am looking to handle the incoming SSL traffic through one server entry and then pass on the specific domain to the internal IIS application. It seems I have 2 options: Code a location section for each subdomain (seems messy from the examples I have found) Forward the unencrypted traffic back to the same nginx server configured with different server entries for each subdomain hostname. (At least this appears to be an option). My ultimate goal is to consolidate much of our SSL traffic to go through nginx so we can use HAProxy to load balance servers. Will approach #2 work within nginx if I properly setup the proxy_set_header entries? I envision something along the lines of this within my final config file (using approach #2): server { listen Y.Y.Y.174:443; #Internally routed IP address server_name *.example.com; proxy_pass http://Y.Y.Y.174:8081; } server { listen Y.Y.Y.174:8081; server_name site1.example.com; -- NORMAL CONFIG ENTRIES -- proxy_pass http://IISServer01:8081; } server { listen Y.Y.Y.174:8081; server_name site2.example.com; -- NORMAL CONFIG ENTRIES -- proxy_pass http://IISServer01:8082; } server { listen Y.Y.Y.174:8081; server_name site3.example.com; -- NORMAL CONFIG ENTRIES -- proxy_pass http://IISServer02:8083; } This seems like a way, but I'm not sure if it's the best way. Am I missing a simpler approach to this?

    Read the article

  • Minecraft server Rkit ubuntu upstart [closed]

    - by user1637491
    I have an Intel server running Ubuntu Server 12.04.1 I am working on moving my CraftBukkit Minecraft Server to the new platform. I read the upstart ubuntu cookbook and wrote a .conf file I have a minecraft user (named minecraft) and its home Directory is /home/minecraft it contains prwxrwxrwx 1 minecraft minecraft 0 Sep 19 14:49 command-fifo drwx------ 8 minecraft minecraft 4096 Sep 19 14:50 HDsaves drwx------ 2 minecraft minecraft 4096 Aug 31 15:13 logrolls -rw-r--r-- 1 root root 5 Sep 19 14:49 minecraft.pid drwxrwxrwx 8 minecraft minecraft 180 Sep 19 14:49 ramdisk -rw------- 1 minecraft minecraft 119 Sep 19 10:34 save.sh drwxrwxrwx 9 minecraft minecraft 4096 Sep 19 14:50 server -rw-rw-r-- 1 minecraft minecraft 44 Aug 31 11:40 shutdown.sh the server directory contains drwxrwxrwx 6 minecraft minecraft 4096 Aug 30 13:32 Backups -rwxrwxrwx 1 minecraft minecraft 0 Sep 18 12:26 banned-ips.txt -rwxrwxrwx 1 minecraft minecraft 17 Sep 18 12:26 banned-players.txt drwxrwxrwx 4 minecraft minecraft 4096 Aug 30 12:26 buildcraft -rwxrwxrwx 1 minecraft minecraft 1447 Sep 18 12:26 bukkit.yml -rwxrwxrwx 1 minecraft minecraft 0 Aug 30 11:05 command-fifo drwxrwxrwx 2 minecraft minecraft 4096 Aug 30 12:26 config lrwxrwxrwx 1 minecraft minecraft 23 Sep 19 14:49 craftbukkit.jar -> ramdisk/craftbukkit.jar -rwxrwxrwx 1 minecraft minecraft 17419 Sep 18 12:26 ForgeModLoader-0.log -rwxrwxrwx 1 minecraft minecraft 17420 Sep 18 12:24 ForgeModLoader-1.log -rwxrwxrwx 1 minecraft minecraft 17420 Sep 18 11:53 ForgeModLoader-2.log -rwxrwxrwx 1 minecraft minecraft 2576 Aug 30 11:05 help.yml drwxrwxrwx 2 minecraft minecraft 4096 Aug 30 12:31 lib drwxrwxrwx 3 minecraft minecraft 4096 Sep 19 14:49 logrolls -rwxrwxrwx 1 minecraft minecraft 200035 Sep 4 17:58 Minecraft_RKit.jar lrwxrwxrwx 1 minecraft minecraft 12 Sep 19 14:49 mods -> ramdisk/mods -rwxrwxrwx 1 minecraft minecraft 5 Sep 18 12:26 ops.txt -rwxrwxrwx 1 minecraft minecraft 0 Aug 30 11:05 permissions.yml lrwxrwxrwx 1 minecraft minecraft 15 Sep 19 14:49 plugins -> ramdisk/plugins lrwxrwxrwx 1 minecraft minecraft 16 Sep 19 14:49 redpower -> ramdisk/redpower -rw-r--r-- 1 root root 255 Sep 19 15:10 server.log -rwxrwxrwx 1 minecraft minecraft 464 Sep 8 11:09 server.properties drwxrwxrwx 3 minecraft minecraft 4096 Sep 5 16:05 SpaceModule drwxrwxrwx 3 minecraft minecraft 4096 Aug 30 13:07 toolkit -rwxrwxrwx 1 minecraft minecraft 1433 Sep 14 21:04 wepif.yml -rwxrwxrwx 1 minecraft minecraft 0 Sep 18 12:26 white-list.txt lrwxrwxrwx 1 minecraft minecraft 13 Sep 19 14:49 world -> ramdisk/world lrwxrwxrwx 1 minecraft minecraft 20 Sep 19 14:49 world_nether -> ramdisk/world_nether lrwxrwxrwx 1 minecraft minecraft 21 Sep 19 14:49 world_the_end -> ramdisk/world_the_end the startup .conf file: # Starts the minecraft server after loading JRE from ramdisk # # for now im still working on it description "minecraft-server" start on filesystem or runlevel [2345] stop on runlevel [!2345] oom score -999 kill timeout 60 pre-start script sh /usr/lib/jvm/java.sh end script script cd /home/minecraft echo "$(date) Starting minecraft" sudo cp -r /home/minecraft/HDsaves/* ramdisk sudo chown -R minecraft:minecraft ramdisk sudo chmod -R 777 ramdisk sudo ln -sf ramdisk/* server sudo chown -R minecraft:minecraft server sudo chmod -R 777 server sudo mv server/server.log server/logrolls/ zip server/logrolls/temp.zip server/logrolls/server.log sudo mv server/logrolls/temp.zip server/logrolls/"$(date)".log.zip sudo rm server/logrolls/server.log sudo rm -f command-fifo sudo mkfifo command-fifo sudo chown minecraft:minecraft command-fifo sudo chmod 777 command-fifo echo "$(date) Root commands finished" echo "$(date) Starting Wrapper" cd server sudo -u minecraft java -Xmx30M -Xms30M -XX:MaxPermSize=40M -Djava.awt.headless=true -jar Minecraft_RKit.jar timv:*spoilers* <> /home/minecraft/command-fifo & sudo echo $! >| /home/minecraft/minecraft.pid echo "$(date) Minecraft Started" end script pre-stop script cd /home/minecraft PID=`cat minecraft.pid` if [ "$PID" != "" ]; then echo "Stopping MineCraft Server PID=$PID" sudo echo save-all >> command-fifo sudo echo .stopwrapper >> command-fifo wait $PID sudo rm minecraft.pid sudo rsync -rt --delete ramdisk/* HDsaves/ echo "$(date) ramdisk save complete" echo "MineCraft save-shutdown complete." else echo "MineCraft not running" fi end script so when I start it up the upstart gererated log says: Wed Sep 19 14:49:30 CDT 2012 Starting minecraft adding: server/logrolls/server.log (stored 0%) Wed Sep 19 14:49:56 CDT 2012 Root commands finished Wed Sep 19 14:49:56 CDT 2012 Starting Wrapper Wed Sep 19 14:49:56 CDT 2012 Minecraft Started

    Read the article

  • VPN with client-to-client direct connectivity?

    - by Johannes Ernst
    When setting up a VPN, clients (say client1 and client2) usually authenticate to a server, and together the three constitute the VPN. When client1 wishes to send a packet to client2, this packet usually gets routed by way of server. Are there products / configuration blueprints for products where it is possible to send packets directly from client1 to client2 without going though server? (if the underlying network topology permits it, e.g. no firewalls in the way) If not, is there a way by which client1 can send a packet to client2 by way of server, without the server being able to snoop on the content of the packet? (E.g. because the packet is encrypted with the public key of client2) I just asked in the OpenVPN forum, and the answer I got was "not with OpenVPN". So my question is: are there other products with which this is possible? Open-source preferred ... One use case: client1 and client2, typically in separate offices, find themselves both at headquarters. Do they still need to talk to each other via the public internet? Links appreciated. Thank you.

    Read the article

  • IIS 404 custom error

    - by Greg B
    I've deployed an ASP.NET 3.5 app to a 64bit Windows 2003 R2 server. In the web.config I have the following <customErrors mode="RemoteOnly" defaultRedirect="/404/"> <error statusCode="404" redirect="/404/"/> <error statusCode="500" redirect="/500/"/> </customErrors> In the website properties in IIS Manager I have set the 404 and 500 errors to Type = "URL" and the same URLs as in the web.config. I have a wildcard application map to the .NET 2.0 aspnet_isapi.dll with "Verify file exists" turned off. If I try to hit a fake .aspx file I successfully get sent to the 404 page. I belive this is because there is an explicit mapping for .aspx to the .NET DLL. If I try to access a fake directory I simply recieve a plain text response saying: The system cannot find the file specified. It would appear that these requests for directories are not being routed through the .NET pipeline, which is what I would expect (and need) to happen becuase of the wildcard application mapping. Any ideas?

    Read the article

  • How to make Exchange 2003 non-authoritive

    - by Romski
    Background We are a small company with an internally hosted Exchange 2003. It receives email for 2 domains (the company was renamed a few years back). For the sake of argument, the domains are: oldname.com newname.com We have moved newname.com to a hosted exchange service, and our DNS record is correctly routing emails. Our internal server still receives email for oldname.com, although we have asked our hosting company to accept emails for that domain. Problem My problem is that emails generated internally from monitoring software, printer, etc. are being caught by our (defunct) internal server and being delivered to the old mailboxes. I believe that what is happening is that our internal exchange server considers itself to be the authoritive server for newname.com. I think it must be looking in active directory for a mailbox and delivering it internally without ever going outside. Attempt to fix I started to follow the article here: http://support.microsoft.com/kb/321721. I removed the SMTP recipient policy for newname.com, and added a dummy address and made it primary. I also answered yes for updating the associated emails. I then restarted the Microsoft Exchange Routing System and SMTP, but emails are still being routed internally. Is there a way to force the exchange server to route all emails for the domain newname.com to the new hosted service?

    Read the article

  • Debian network bridge configuration - /etc/network/interfaces

    - by Mathias
    I'm running a Lenny Xen dom0 hosting multiple virtual machines in a routed IP setup. To get an additional private subnet, I created the bridge xenbr0 in the dom0 with the following commands: brctl addbr xenbr0 ifconfig xenbr0 10.0.0.1 netmask 255.255.255.0 ifconfig xenbr0 up This works as expected, and domU interfaces are added to the bridge by Xen on VM start. My only problem is: how the heck do i specify this configuration in /etc/network/interfaces that it remains permanent and the bridge is available after a reboot? I tried the following config as found on a lot of tutorials: auto xenbr0 iface xenbr0 inet static address 10.0.0.1 netmask 255.255.255.0 network 10.0.0.0 broadcast 10.0.0.255 bridge_stp no I get 2 different errors, depending on if the bridge already exists or not. If it doesn't exist: root@dom0:~# brctl show bridge name bridge id STP enabled interfaces root@dom0:~# /etc/init.d/networking restart Reconfiguring network interfaces...if-up.d/mountnfs[eth0]: waiting for interface xenbr0 before doing NFS mounts (warning). SIOCSIFADDR: No such device xenbr0: ERROR while getting interface flags: No such device SIOCSIFNETMASK: No such device SIOCSIFBRDADDR: No such device xenbr0: ERROR while getting interface flags: No such device xenbr0: ERROR while getting interface flags: No such device Failed to bring up xenbr0. done. And if it exists: root@dom0:~# brctl show bridge name bridge id STP enabled interfaces xenbr0 8000.000000000000 no root@dom0:~# /etc/init.d/networking restart Reconfiguring network interfaces...if-up.d/mountnfs[eth0]: waiting for interface xenbr0 before doing NFS mounts (warning). RTNETLINK answers: File exists Failed to bring up xenbr0. done. Could anyone point me in the right direction please? The bridge works fine when created manually, i just need the right config file entries. The most tutorials I found add some devices to the bridge in the config, is that maybe the problem why it is not working? I don't have any interfaces I want to add to the bridge on creation as they get added later on VM start... Thanks, Mathias

    Read the article

  • DansGuardian/Squid Traffic doesn't get back to user

    - by DKNUCKLES
    I've purchased a Squid appliance that I'm attempting to implement, however the lack of documentation has left me a bit high and dry. Forgive me if this is a silly question, but this is my first attempt at implementing Squid. From what I can ascertain from the documentation (or lack thereof), the users connect to DansGuardian first at port 8080 where the filtering is done, at which point it forwards it to the Squid appliance at port 3128. The traffic is then sent to the internet. The setup I have is as follows Gateway (MikroTik router) : 192.168.88.1 Squid/DansGuardian :192.168.88.100 Client : 192.168.88.238 Client --- Gateway --- Proxy --- Internet I have set up a simple NAT rule to forward all traffic from the client machine (for testing purposes) to go to the DansGuardian. The traffic seems to get there, although I see a lot of SYN_RECV w/ a netstat -antp command on the virtual appliance machine. From this I gather that the traffic is NOT being routed back to the client machine. Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:8080 0.0.0.0:* LISTEN - tcp 0 0 192.168.88.100:8080 192.168.88.238:55786 SYN_RECV - tcp 0 0 192.168.88.100:8080 192.168.88.238:55787 SYN_RECV - tcp 0 0 192.168.88.100:8080 192.168.88.238:55785 SYN_RECV - tcp 0 0 192.168.88.100:8080 192.168.88.238:55788 SYN_RECV - tcp 0 0 0.0.0.0:10000 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN - Is this a routing issue or an issue with the Squid Appliance?

    Read the article

  • Public-to-Public IPSec tunnel: NAT confusion

    - by WuckaChucka
    I know this is possible -- and apparently fairly common with larger companies that don't/can't route private addresses for overlap reasons -- but I can't wrap my head around how to get this to work. I'm playing around with pfSense, Vyatta and a Cisco 5505 right now, hardware-wise. So here's my setup: WEST: Vyatta outside: 10.0.0.254/24 inside: 172.16.0.1/24 machine a: 172.16.0.200/24 EAST: Cisco 5505 outside: 10.0.0.210/24 inside: 192.168.10.1 machine b (webserver): 192.168.10.2 So what we're trying to do is this: route traffic across the tunnel from machine A to machine B without using private addresses. i.e. 172.16.0.200 makes a TCP request to 10.0.0.210:80, and as far as EAST is concerned, it sees a src IP of 10.0.0.254. On WEST, I have your typical many-to-one Source NAT to translate 172.16.0.0/24 to 10.0.0.254 and that's confirmed to be working. Also on WEST, I have the following IPSec config: Local IP: 10.0.0.254 Peer IP: 10.0.0.210 local subnet: 10.0.0.254/32 remote subnet: 10.0.0.210/32 I have the reversed configuration on EAST. What happens when I make a request from machine A to 10.0.0.210:80 is that the SNAT translates the private address of machine A to 10.0.0.254 and it's routed out (and discarded at the other end) without establishing the tunnel. What I'm assuming is happening is that the inside interface on WEST receives a packet from 172.16.0.200 and since this doesn't match the local subnet defined in the tunnel configuration, it's not processed by the IPSec engine and the tunnel is not established. How do you make this work? Seems like a chicken and egg thing with the NAT and IPSec and I just can't wrap my head around how this can be done: can I say, "if a packet is received on the inside interface with a destination of 10.0.0.210, translate it to 10.0.0.254 before the IPSec engine inspects it"?

    Read the article

  • How to restore Linode to Vagrant VM?

    - by Iain Elder
    I'm trying to set up a Linux development environment so I can safely make changes to my website without breaking the live site. Linode hosts my live site. A simple solution would be to host my development server on Linode as well, but I want to avoid doubling my hosting costs. The cheapest way I see is to use Vagrant on my Windows workstation to host my development environment. After I attempt to restore the backup to Vagrant and reboot the VM, I can no longer ssh into the Vagrant host. It's probably because by restoring the backup I overwrite some special Vagrant configuration, but I'm not sure how to avoid that. How do I make this approach work? If my approach is fundamentally wrong, can you suggest an alternative? Creating the backup On the Linode I used these commands to create a compressed copy of the entire filesystem, while ignoring things that shouldn't be included in the backup: $ sudo rsync -ahvz --exclude={/dev/*,/proc/*,/sys/*,/tmp/*,/run/*,/mnt/*,/backup/*} /* /backup/2 $ sudo tar -czf /backup/2.gz /backup/2 The backup file is called 2.gz because this is thesecond backup. The first backup is called 1.gz. I use WinSCP to copy the backup file to my Windows workstation. Setting up the Vagrant host I need a Vagrant box that matches my Linode operating system (Ubuntu 12.04.3 LTS, kernel 3.9.3). I selected the closet match from vagrantbox.es: Ubuntu Server Precise 12.04.3 amd64 Kernel is ready for Docker (Docker not included) On my workstation I ran these commands to add the box and initialize and boot an instance: $ vagrant box add ubuntu-precise http://nitron-vagrant.s3-website-us-east-1.amazonaws.com/vagrant_ubuntu_12.04.3_amd64_virtualbox.box $ mkdir linode-test $ cd linode-test $ vagrant init ubuntu-precise $ vagrant up Now Vagrant is running a machine with SSH on port 2222. The operating system version is the same. The kernel version is 3.8.0. Sounds close enough. Restoring the backup With WinSCP I copied the backup file 2.gz to /home/vagrant/2.gz on the Vagrant box. With PuTTY I connected via ssh to my new Vagrant box: On the box move the backup to the filesystem root. $ sudo mv 2.gz / Extract the archive to the filesystem root: $ sudo tar -xvpz -f 2.gz -C / --strip-components=2 (I discovered I need to use strip components because all files in the archive have the prefix backup/2/. I'll fix this for the next backup.) After the tar command completes, I log out of the box. Testing the backup When I try to log in again, it doesn't let me log in as vagrant with a password any more. It does let me log in as iain, my user on the live Linode, with a password. That surprised me because I disabled password authentication on my live Linode. I figured that I have to restart the ssh service for the change to take effect. Instead of restarting just ssh, I chose to restart the whole system. Now I can't even get to the login screen. PuTTY says "connection refused" when I try to connect. What went wrong?

    Read the article

  • NETKEY IPsec and ARP

    - by Shawn J. Goff
    I'm wondering if I have the correct routing setup for an IPsec tunnel. I have control over the IPsec endpoints and the hosts connected to one side. These hosts are connecting to the tunnel so that they have access to the network on the other side of what I will call the IPsec server. I don't have control of the network upstream of this server. Normally, the IPsec server will not respond to ARP requests for the hosts on the other side of the tunnel. So when a packet arrives for one of my hosts the server gets ARP requests, but the upstream router gets no response, and cannot construct the ethernet frame to send me the packets. If I was using one of the swan stacks, I would have a separate interface, and I'd probably just need to turn on proxyarp, but I'm using NETKEY, which doesn't use a separate interface for the tunnel. To solve the problem for now, I have added an eth0.5 vlan to the IPsec server, turned on proxyarp for that interface, and added all routes my hosts addresses to that interface so that it will respond to those ARP requests (and will therefore get relevant packets routed to it). This works, but it feels wrong. What is the correct way to get the upstream router to send me the traffic for these hosts?

    Read the article

  • SharePoint Records Center Submitted E-mail Records not picked up

    - by Kenneth Verburg
    We have set up a new SharePoint 2007 site with a Records Repository. We're using Exchange 2007 Managed Folders to route e-mails to this repository based on the 'label' attached to the e-mail as set in the Exchange 2007 journaling options. E-mails added to a Managed Folder get sent to SharePoint, they end up in the "Submitted E-mail Records" list of the Records Repository. That's according to plan, but the e-mails are not routed to the respective document library as defined by the label. Instead an error appears in the event viewer for every e-mail listed in the Submitted E-mail Records list, on every interval of the records repository schedule (set to every two minutes for testing purposes): Value cannot be null, parameter name: g. Sending a document from the SharePoint site iself to the Records Repository via the Send To... link works fine, but e-mails get stuck in the list... We have set Document Libraries in the Respository with and without content types (with matching names with the Label and the Record Routing rule set). Any ideas what could be wrong? This is in the event log: Every two minutes the following error appears in the Application Log: Source: Office SharePoint Server Category: Records Center Type: Error Event ID: 4975 User: N/A Computer: SPS2007 Description: Value cannot be null. Parameter name: g For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    Read the article

  • Reuse remote ssh connections and reduce command/session logging verbosity?

    - by ewwhite
    I have a number of systems that rely on application-level mirroring to a secondary server. The secondary server pulls data by means of a series of remote SSH commands executed on the primary. The application is a bit of a black box, and I may not be able to make modifications to the scripts that are used. My issue is that the logging in /var/log/secure is absolutely flooded with requests from the service user, admin. These commands occur many times per second and have a corresponding impact on logs. They rely on passphrase-less key exchange. The OS involved is EL5 and EL6. Example below. Is there any way to reduce the amount of logging from these actions. (By user? By source?) Is there a cleaner way for the developers to perform these ssh executions without spawning so many sessions? Seems inefficient. Can I reuse the existing connections? Example log output: Jul 24 19:08:54 Cantaloupe sshd[46367]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:54 Cantaloupe sshd[46446]: Accepted publickey for admin from 172.30.27.32 port 33526 ssh2 Jul 24 19:08:54 Cantaloupe sshd[46446]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:54 Cantaloupe sshd[46446]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:54 Cantaloupe sshd[46475]: Accepted publickey for admin from 172.30.27.32 port 33527 ssh2 Jul 24 19:08:54 Cantaloupe sshd[46475]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:54 Cantaloupe sshd[46475]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:54 Cantaloupe sshd[46504]: Accepted publickey for admin from 172.30.27.32 port 33528 ssh2 Jul 24 19:08:54 Cantaloupe sshd[46504]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:54 Cantaloupe sshd[46504]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:54 Cantaloupe sshd[46583]: Accepted publickey for admin from 172.30.27.32 port 33529 ssh2 Jul 24 19:08:54 Cantaloupe sshd[46583]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:54 Cantaloupe sshd[46583]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:54 Cantaloupe sshd[46612]: Accepted publickey for admin from 172.30.27.32 port 33530 ssh2 Jul 24 19:08:54 Cantaloupe sshd[46612]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:54 Cantaloupe sshd[46612]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:55 Cantaloupe sshd[46641]: Accepted publickey for admin from 172.30.27.32 port 33531 ssh2 Jul 24 19:08:55 Cantaloupe sshd[46641]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:55 Cantaloupe sshd[46641]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:55 Cantaloupe sshd[46720]: Accepted publickey for admin from 172.30.27.32 port 33532 ssh2 Jul 24 19:08:55 Cantaloupe sshd[46720]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:55 Cantaloupe sshd[46720]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:55 Cantaloupe sshd[46749]: Accepted publickey for admin from 172.30.27.32 port 33533 ssh2 Jul 24 19:08:55 Cantaloupe sshd[46749]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:55 Cantaloupe sshd[46749]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:55 Cantaloupe sshd[46778]: Accepted publickey for admin from 172.30.27.32 port 33534 ssh2 Jul 24 19:08:55 Cantaloupe sshd[46778]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:55 Cantaloupe sshd[46778]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:55 Cantaloupe sshd[46857]: Accepted publickey for admin from 172.30.27.32 port 33535 ssh2

    Read the article

  • Host spreads wrong MAC Adress of router on the WIFI

    - by JavaIsMyIsland
    Strange things are going on our network. Since yesterday a host which is actually not on our subnet spreads wrong ARP Replys on our network. To be precise, only on the WIFI. If I connect my Laptop to the cable ethernet, it gets the right MAC adress of the router. Also my Android phone and my Ubuntu system do get the right MAC Adress. So I took a look at wireshark. When I clear the ARP cache of the windows machine, the first ARP response is correct and comes from the router. But like 10 ms later another ARP response comes from another host in the WIFI. The host changes its IP Adresses from time to time and they look like they are not on our subnet. So I can not use the internet because DNS is not working anymore. Sometimes the router wins the race condition and the mac adress is set correctly in the arp cache. I first thought, this is an arp-poisoning mitm attack but it does not make sense if the packets get not routed correctly?! I restarted the router but it didn't help. I have no access to the router, else I would change the shared key to make sure there is no intruder on the wifi.

    Read the article

  • GRE Tunnel over IPsec with Loopback

    - by Alek
    Hello, I'm having a really hard time trying to estabilish a VPN connection using a GRE over IPsec tunnel. The problem is that it involves some sort of "loopback" connection which I don't understand -- let alone be able to configure --, and the only help I could find is related to configuring Cisco routers. My network is composed of a router and a single host running Debian Linux. My task is to create a GRE tunnel over an IPsec infrastructure, which is particularly intended to route multicast traffic between my network, which I am allowed to configure, and a remote network, for which I only bear a form containing some setup information (IP addresses and phase information for IPsec). For now it suffices to estabilish a communication between this single host and the remote network, but in the future it will be desirable for the traffic to be routed to other machines on my network. As I said this GRE tunnel involves a "loopback" connection which I have no idea of how to configure. From my previous understanding, a loopback connection is simply a local pseudo-device used mostly for testing purposes, but in this context it might be something more specific that I do not have the knowledge of. I have managed to properly estabilish the IPsec communication using racoon and ipsec-tools, and I believe I'm familiar with the creation of tunnels and addition of addresses to interfaces using ip, so the focus is on the GRE step. The worst part is that the remote peers do not respond to ping requests and the debugging of the general setup is very difficult due to the encrypted nature of the traffic. There are two pairs of IP addresses involved: one pair for the GRE tunnel peer-to-peer connection and one pair for the "loopback" part. There is also an IP range involved, which is supposed to be the final IP addresses for the hosts inside the VPN. My question is: how (or if) can this setup be done? Do I need some special software or another daemon, or does the Linux kernel handle every aspect of the GRE/IPsec tunneling? Please inform me if any extra information could be useful. Any help is greatly appreciated.

    Read the article

  • Exchange 2003-Exchange 2010 post migration GAL/OAB problem

    - by user68726
    I am very new to Exchange so forgive my newbie-ness. I've exhausted Google trying to find a way to solve my problem so I'm hoping some of you gurus can shed some light on my next steps. Please forgive my bungling around through this. The problem I cannot download/update the Global Address List (GAL) and Offline Address Book (OAB) on my Outlook 2010 clients. I get: Task 'emailaddress' reported error (0x8004010F) : 'The operation failed. An object cannot be found.' ---- error. I'm using cached exchange mode, which if I turn off Outlook hangs completely from the moment I start it up. (Note I've replaced my actual email address with 'emailaddress') Background information I migrated mailboxes, public store, etc. from a Small Business Server 2003 with Exchange 2003 box to a Server 2008 R2 with Exchange 2010 based primarily on an experts exchange how to article. The exchange server is up and running as an internet facing exchange server with all of the roles necessary to send and receive mail and in that capacity is working fine. I "thought" I had successfully migrated everything from the SBS03 box, and due to huge amounts of errors in everything from AD to the Exchange install itself I removed the reference to the SBS03 server in adsiedit. I've still got access to the old SBS03 box, but as I said the number of errors in everything is preventing even the uninstall of Exchange (or the starting of the Exchange Information Store service), so I'm quite content to leave that box completely out of the picture while trying to solve my problem. After research I discovered this is most likely because I failed to run the “update-globaladdresslist” (or get / update) command from the Exchange shell before I removed the Exchange 2003 server from adsiedit (and the network). If I run the command now it gives me: WARNING: The recipient "domainname.com/Microsoft Exchange System Objects/Offline Address Book - first administrative group" is invalid and couldn't be updated. WARNING: The recipient "domainname.com/Microsoft Exchange System Objects/Schedule+ Free Busy Information – first administrative group" is invalid and couldn't be updated. WARNING: The recipient "domainname.com/Microsoft Exchange System Objects/ContainernameArchive" is invalid and couldn't be updated. WARNING: The recipient "domainname.com/Microsoft Exchange System Objects/ContainernameContacts" is invalid and couldn't be updated. (Note that I’ve replaced my domain with “domainname.com” and my organization name with “containername”) What I’ve tried I don’t want to use the old OAB, or GAL, I don’t care about either, our GAL and distribution lists needed to be organized anyway, so at this point I really just want to get rid of the old reference to the “first administrative group” and move on. I’ve tried to create a new GAL and tell Exchange 2010 to use that GAL instead of the old GAL, but I'm obviously missing some of the commands or something dumb I need to do to start over with a blank slate/GAL/OAB. I'm very tempted to completely delete the entire "first administrative group" tree from adsiedit and see if that gets rid of the ridiculous reference that no longer exists but I dont want to break something else. Commands run to try to create a new GAL and tell exch10 to use that GAL: New-globaladdresslist –name NAMEOFNEWGAL Set-globaladdresslist GUID –name NAMEOFNEWGAL This did nothing for me except now when I run get-globaladdresslist or with the | FL pipe I see two GALs listed, the “default global address list” and the “NAMEOFNEWGAL” that I created. After a little more research this morning it looks like you can't change/delete/remove the default address list, and the only way to do what I'm trying to do would be to maybe remove the default address list via adsiedit and recreate with a command something like new-GlobalAddressList -Name "Default Global Address List" -IncludedRecipients AllRecipients. This would be acceptable but I've searched and searched and can't find instructions or a breakdown of where exactly the default GAL lives in AD, and if I'd have to remove multiple child references/records. Of interest I'm getting an event ID 9337 in my application log OALGen did not find any recipients in address list \Global Address List. This offline address list will not be generated. -\NAMEOFMYOAB --------- on my Exchange 2010 box, which pretty much to me seems to confirm my suspicion that the empty GAL/OAB is what's causing the Outlook client 0x8004010F error. Help please!

    Read the article

  • Using Round Robin DNS on simple VPN setup

    - by dannymcc
    We have two internet connections which are load balanced to share the load between the two. We set this up after one of the internet provider proved to be less than reliable but great speed and latency wise when it is working. We'd rather utilise both connections as much as possible rather than leave one idle until the other drops out. We have a number of remote workers who occasionally need to connect via VPN from their laptops or iPads, we also have a small number of permanent LAN to LAN tunnels running from smaller branches. Originally we only had one internet connection and used one of our static IP addresses for all VPN users. Now that we have two internet connections running all of the time I am trying to make sure that the VPN is available to our team regardless of which connection drops. So my solution is to create two A records for our domain name with a value of vpn. and the two static IP addresses from each peer. Is this a sensible way of achieving this? Should I expect higher latency due to packets being lost if one peer fails and some packets still get routed to it anyway? A brief mockup of the setup I have:

    Read the article

  • htaccess on remote server issues - password prompt not accepting input

    - by pying saucepan
    EDIT: I will contact the university about my problem after labor day weekend, but I thought if someone knew a quick fix that I haven't tried, or if the problem has an obvious fix then I could hope to try my luck here, thanks! TLDR: Sorry its a long post, I thought I should be... thorough. I am having a common issue (found a dead thread through google with no solution to the same problem) with the prompt to enter in a username and password via htaccess rights, but this prompt will keep popping up asking for a username and password when trying to access my home directory on my university's server which has the .htaccess and .htpasswd files. It does not matter if I enter in correct or incorrect credentials, the prompt will keep asking me for input without displaying my home directory. Ever since I have included these ht files I have never once been able to get past the username/password no matter what I have tried, save for removing them from the directory I am trying to access (my top level directory that I own). This kind of served my original goal of making the top level directory inaccessible to casual users, but if I wanted to use this method on other places, I would want it to work as intended. And I also like it when computers do what I wish they would, so any help is appreciated. Some things I have tried: Changing the file/directory access rights: they told me to try these commands if people can't access my files cd ~/public_html find ./ -type d -exec chmod 755 {} \; find ./ -type f -exec chmod 644 {} \; enter in the single character name/pw at least twenty times in a row, no cheddar. so I changed directory with cd ~ in hopes that this would be my home directory, since my home directory contains the "public_html" directory, so logic tells me that the ~ tilde symbol is the top level directory that I have ownership of. Then I did those two commands to change the rights on the files inside, I am still having no luck. How I got to this point: I have been following the instructions given to me through my university's website for setting up my little directory. A link on how they describe how to password protect the home directory is given below: "Protect Web Directories" instructions I have everything in order except for one small detail that I feel probably does not matter. I am on windows and so I am using winSCP to remote control my allocated server space. The small detail is that as the instructions indicate (on step 3) that I should use the command htpasswd -c .htpasswd {username} where {username} is my folder that holds my allocated server space. But this command requires further input through the terminal, and unfortunately winSCP does not offer this kind of functionality. So I looked up some basic instructions on using htaccess and it is formatted correctly such that the .htaccess file appears as follows: AuthType Basic AuthName "Verify" AuthUserFile /correctpath/.htpasswd require valid-user and this file is in the root directory for my server space as well as the .htpasswd file which has only this data inside: username:password I know for sure that these two files must be formatted correctly, at least according to their tutorial, because before my path was incorrectly formatted via including some curly { braces } without knowing the correct way to do this at first. And the password prompt that shows up when accessing my directory responded by loading an error page indicating to contact OSU admin or something not important. But now that I have everything like it 'should' be. I know this because when I enter in my credentials "username and password" the prompt pops up for my username and password again and again whether or not I enter in correct information. The only exception is that if I click cancel it will direct me to a page saying that I need to enter in a username and password. Note that I am very inexperienced at server-related buisness, two days ago I couldn't have told you what a website actually consists of. So, if you use some technical jargon I may or may not need to look it up and get back to you before I actually understand what you mean, but I am a quick learner and it probably wont matter.

    Read the article

  • Network Misconfiguration when adding first host to new vSphere cluster

    - by dunxd
    I am building a new vSphere cluster from scratch. I have installed ESXi on the first host, and built a vCenter server on a VM residing on that host (storage is on the local hard drive, although we have iSCSI targets which I can reach from the host). The cluster is configured for HA. When I try and add the host to the cluster, I get an error at the point where HA is configured - Cannot complete the . I have stripped the network configuration of the host down to the most basic - a single NIC attached to a single vSwitch - this is running the VMKernel Port on VLAN 8 - that is our Management VLAN. The vCenter server will have a network address on this VLAN, so I also set the initial Virtual Machine Port Group to this VLAN, and connected the vCenter server NIC to this port group. I understand I can't connect the vCenter server to the VMkernel port group, but shouldn't I be able to connect the vCenter server to a Port Group in the same VLAN? If not, do I need to create a VLAN specifically for VMKernel Port Group? I plan to set up another port group for vMotion with a dedicated and isolated VLAN (i.e. VLAN isn't routed) so this wouldn't allow vCenter to communicate. Does anyone have any suggestions, or other ideas for what might be causing the problem. I've read through the documentation, but it isn't giving me any pointers, and the error message isn't helping me beyond telling me something is wrong with my network config.

    Read the article

  • Intel NIC X540-T1 non-functional in Ubuntu Server 12.04

    - by Jeff Carr
    I have installed three Intel X540-T1's in servers running Ubuntu Server 12.04, but all are non-functional, no link lights, no packets sent or received, and no connection on ip4 or ip6 whether set up as dhcp or static. Also, dmesg doesn't detect cable connection or disconnection. I updated the default ixgbe driver to Intel's latest version (3.11.33) with no change. The ethernet controller is being reported as X540-AT2 (which might be a problem that I can't figure out how to fix), but the subsystem is X540-T1 so I believe that might be intended. Does anyone have any experience with this that could assist? ifconfig eth2 eth2 Link encap:Ethernet HWaddr a0:36:9f:14:5f:ea inet addr:192.168.101.1 Bcast:192.168.101.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1<br> RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ethtool -i eth2 driver: ixgbe version: 3.11.33 firmware-version: 0x8000037c bus-info: 0000:08:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: yes lspci -vvnns 08:00.0 08:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Controller 10 Gigabit X540-AT2 [8086:1528] (rev 01) Subsystem: Intel Corporation Ethernet Converged Network Adapter X540-T1 [8086:0002] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at e8000000 (64-bit, prefetchable) [size=2M] Region 4: Memory at e8200000 (64-bit, prefetchable) [size=16K] [virtual] Expansion ROM at e8280000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: ixgbe Kernel modules: ixgbe

    Read the article

  • (Zywall USG 300) NAT bypassed when accessing in-house-server From LAN Via domain name

    - by mschr
    My situations is like this; i host a number of websites from within our joint network solution. On the network is basically 3 categories: the known public, registered via mac, given static dhcp lease the anonymous lan connections, given lease from specific dhcp range switches, unix hosts firewall Now, consider following hosts which are of interest 111.111.111.111 (Zywall USG 300 WAN) 192.168.1.1 (ZyWall USG 300 LAN) load balances and bw monitors plus handles NAT 192.168.1.2 (Linux www) serves mydomain1.tld and mydomain2.tld 192.168.123.123 (Random LAN client) accesses mydomain1.tld from LAN 23.234.12.253 (Random External client) accesses mydomain1.tld via WAN DNS A records are setup so that both mydomain1.tld and mydomain2.tld points to 111.111.111.111 - and the Linux www serves the http parts with VirtualHost configurations, setting up the document roots pr ServerName, this is not so interesting though.. NAT rule translates 111.111.111.111:80 to 192.168.1.2:80 (1:1 NAT) Our problem follows; When accessing http://mydomain1.tld from outside (23.234.12.253 example host) the joint network - everything is fine, zywall receives requests via port 80 and maps it to the linux host' httpd. However - once trying to go through the NAT from LAN side (in-house, 192.168.123.123 example host) then one gets filtered in the Zywall port 80 firewall. I know this only because port 443 is open for administration interface and https://mydomain1.tld prompts for zywall login. So my conclusion is, that the LAN that accesses 111.111.111.111 in fact are routed to 192.168.1.1 whilst bypassing the NAT table. I need to know how to setup NAT / Policy Route, so that LAN WAN LAN will function with proper network translations instead of doing the 'quick nameserver lookup' or whatever this might be.

    Read the article

  • In what (small) ways can I modify Octave's compile options to enhance it without breaking it?

    - by irrational John
    If the title to this question seems a bit vague, I am sorry. But I wasn't sure how to distill what I am attempting to do into a single sentence. A few weeks back I learned that I could build and install recent releases of Octave on an Ubuntu 12.04 system by following the steps below. Install the tools needed to compile, link, and run octave. For Ubuntu the commands below have worked for me. sudo apt-get build-dep octave3.2 sudo apt-get install build-essential gnuplot gtk2-engines-pixbuf sudo apt-get install libfontconfig-dev bison Next, download the source code for an Octave release from the Gnu Project Archives for Octave and unpack the archive into a folder on your system. Use the commands below to build, check, and install octave. ./configure make make check sudo make install Unfortunately it turns out that the above builds an Octave that contains all the debugging symbol tables. The object files alone are huge taking up around 1.7 GB. The current Octave documentation suggests To compile without debugging symbols try the command make CFLAGS=-O CXXFLAGS=-O LDFLAGS= instead of just make. However, when I tried this it did not work. The -g option was still used for the compiles. For the heck of it I instead tried ./configure CFLAGS=-O CXXFLAGS=-O and this did work. (Instead of ~1.7GB the result of the build now takes up around 253MB). My questions are Is this actually the correct (recommended?) method to use to compile Octave without debugging symbols (i.e. without -g)? How would I compile Octave so it uses x86_64 rather than x86? Note: I am not asking how to compile Octave to use the (experimental) 64-bit integers for array dimensions. I just want to allow the compiler to use the extra registers and word sizes available when an app runs in 64-bit mode. Is a (more) complete list available for the directives used with the Octave Makefile? I have only seen make, make check, and make install documented. But apparently make distclean is also allowed. (It removes the compilation results so you can do a complete rebuild of everything.) I'm wondering what else might be available. FWIW, I have tried using ./configure CFLAGS="-O3 -mtune=core2 -m64" CXXFLAGS="-O3 -mtune=core2 -m64" and, surprisingly, it not only appeared to build, but also ran and passed the make check tests. The ./configure script even gave me the (deceptively?) reassuring message "Octave is now configured for x86_64-unknown-linux-gnu". But of course that's not the same thing as saying it actually "works". Is there a recommended way to enable Octave to run as an x86_64 app? I have also tried looking inside the Octave Makefile to see if I could decipher what command line directives it accepts. I got nowhere. I have not a single clue as to how that Makefile does whatever it is that it does.

    Read the article

  • What parts of a motherboard age, and how can I choose one with the longest possible life?

    - by Robert Harvey
    I have a home-built computer that's probably about four years old. I realize this probably seems ancient to some folks, but computers have no moving parts (except the fans), so theoretically they should last a long time, if I still have software to run on them. A few weeks ago, it began blue-screening and freezing up, with various error messages. It almost always happened about five minutes after startup. I assumed that the video card was overheating, since the cheap little fan on the heatsink died, so I replaced it. Long story short, after upgrading the video drivers a couple of times and performing some other troubleshooting, I remembered that the last time this happened, I took out the memory SIMS and cleaned the contacts with a gum eraser, so I did that again (noting that the SATA cables were very close to the chips on the SIMS). I re-routed the cables and reinstalled the SIMS. So far, so good; the machine has been trouble-free since. But blue-screens are distressing; I never know what bits are being chewed up in my OS installation when something like this happens. So I'm wondering if I'm choosing my components properly. If it matters, it's an Intel D915GAG motherboard and Corsair memory, but what I'm wondering is, should I be looking for certain characteristics when I choose these parts for my next computer, so that I can avoid this problem in my next build?

    Read the article

  • RAID administration in Debian Lenny

    - by Siim K
    I've got an old box that I don't want to scrap yet because it's got a nice working 5-disk RAID assembly. I want to create 2 arrays: RAID 1 with 2 disks and RAID 5 with the other 3 disks. The RAID card is Intel SRCU31L. I can create the RAID 1 volume in the console that you access with Ctrl+C at startup. But it only allows for creation of one volume so I can't do anything with the 3 remaining disks. I installed Debian Lenny on the RAID 1 volume and it worked out nicely. What utilites could I now use to create/manage the RAID volumes in Debian Linux? I installed the raidutils package but get an error when trying to fetch a list: #raidutil -L controller or #raidutil -L physical # raidutil -L controller osdOpenEngine : 11/08/110-18:16:08 Fatal error, no active controller device files found. Engine connect failed: Open What could I try to get this thing working? Can you suggest any other tools? Command #lspci -vv gives me this about the controller: 00:06.1 I2O: Intel Corporation Integrated RAID (rev 02) (prog-if 01) Subsystem: Intel Corporation Device 0001 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Step ping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 26 Region 0: Memory at f9800000 (32-bit, prefetchable) [size=8M] [virtual] Expansion ROM at 30020000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: PCI_I2O Kernel modules: i2o_core

    Read the article

  • How to Load Balance 2 Internet Connections on a Windows 7 machine?

    - by Jimmy Chandra
    It's sort of related to this particular question, but that one is on Mac. I am looking for similar solution on Windows 7. I have 2 network connections: (Connection A) Wireless terminal connecting to ISP A (3G / EVDO internet provider) (Connection B) Broadband wired connection connecting to ISP B (Cable internet provider) Both has access to the internet. When I try connecting to a website and checking the networking tab on my Task Manager, I only see the network traffic being routed to only Connection A. Is there a way to make the computer to utilize both network (in a sense using all the bandwidth available from both the Cable ISP and the 3G / EVDO ISP) at the same time? If so, what do I need to do to set this up ... on Windows 7? Here is a bit more info on my network connections (ipconfig /all): PPP adapter Wireless Terminal: IPv4: aa.bb.ccc.ddd(preferred) Subnet mask: 255.255.255.255 Default Gateway: 0.0.0.0 DNS: aa.ee.f.ggg aa.ee.f.hhh Primary Wins: jjj.ii.k.l Secondary Wins: jjj.ii.k.m Ethernet adapter LAN: IPv4: 192.168.1.100 (connected to a router by wired that itself connect to a cable modem) subnet mask: 255.255.255.0 Default gateway: 192.168.1.1 (the wireless router) DHCP: 192.168.1.1 (the wireless router) DNS: xxx.yy.zz.ww rr.sss.t.uuu For my own privacy, I don't believe the actual number matters, the patterns are representative of the ip numbering scheme...

    Read the article

  • Android openvpn + zeroconf browser sending mdns query packets over eth0 instead of tap0 interface on wifi

    - by Mrunal
    On an android device, I am connecting to a remote network using openvpn for performing service discovery. WORKING CASE: After the device is camped on 3g/4g and after connecting to remote network by openvpn, when the zeroconf browser is launched, I can see the mdns query packets being send through the tap0 interface resulting into rendering of services on the browser. From the tcpdump captured on the device, I can see that the mdns query packets are send to tap0 interface. tap0 ip: 192.168.11.200 Route table information: Destination Gateway Genmask Flags Metric Ref Use Iface 76.26.112.234 10.179.240.1 255.255.255.255 UGH 0 0 0 pdpbr1 10.179.240.1 * 255.255.255.255 UH 0 0 0 pdpbr1 32.1.72.136 * 255.255.255.255 UH 0 0 0 pdpbr0 10.179.240.0 * 255.255.255.0 U 0 0 0 pdpbr1 192.168.11.0 * 255.255.255.0 U 0 0 0 tap0 default 192.168.11.1 0.0.0.0 UG 0 0 0 tap0 NOT WORKING CASE: However, after switching on the wifi and connecting it to remote network, when the zeroconf browser is launched, instead of sending the mdns query packets to tap0 interface; these packets are being send to eth0 interface due to which we cannot see the services. From the tcpdump captured on the device, I can see that mdns query packets are send to eth0 interface. tap0 ip: 192.168.11.200 eth0 ip: 192.168.43.230 route table information: Destination Gateway Genmask Flags Metric Ref Use Iface 76.26.112.234 192.168.43.1 255.255.255.255 UGH 0 0 0 eth0 32.1.72.136 * 255.255.255.255 UH 0 0 0 pdpbr0 192.168.11.0 * 255.255.255.0 U 0 0 0 tap0 192.168.43.0 * 255.255.255.0 U 0 0 0 eth0 default 192.168.11.1 0.0.0.0 UG 0 0 0 tap0 In the above case, even though there is a default route for tap0, all the multicast packets are being routed through eth0. How is this possible? Has anyone observed a similar problem and it would be really helpful if you can help us to discover services through zeroconf browser after the device is connected to remote network via openvpn through wifi. Thank You Very much, Mrunal

    Read the article

< Previous Page | 103 104 105 106 107 108 109 110 111 112 113 114  | Next Page >