Search Results

Search found 3517 results on 141 pages for 'communication diagram'.

Page 108/141 | < Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >

• I am unable to run a client/server program in php

  - by sibi

  This is the program I am trying to run: $host = "127.0.0.1"; $port = 25003; // don't timeout! set_time_limit(0); // create socket $socket = socket_create(AF_INET, SOCK_STREAM, 0) or die("Could not create socket\n"); // bind socket to port $result = socket_bind($socket, $host, $port) or die("Could not bind to socket\n"); // start listening for connections $result = socket_listen($socket, 3) or die("Could not set up socket listener\n"); // accept incoming connections // spawn another socket to handle communication $spawn = socket_accept($socket) or die("Could not accept incoming connection\n"); // read client input $input = socket_read($spawn, 1024) or die("Could not read input\n"); // clean up input string $input = trim($input); echo "Client Message : ".$input; // reverse client input and send back $output = strrev($input) . "\n"; socket_write($spawn, $output, strlen ($output)) or die("Could not write output\n"); // close sockets socket_close($spawn); socket_close($socket); I enabled the PHP_socket option in WAMP but still I keep getting errors like unable to bind. Can someone please help me out?

  Read the article

• Security for university research lab systems

  - by ank

  Being responsible for security in a university computer science department is no fun at all. And I explain: It is often the case that I get a request for installation of new hw systems or software systems that are really so experimental that I would not dare put them even in the DMZ. If I can avoid it and force an installation in a restricted inside VLAN that is fine but occasionally I get requests that need access to the outside world. And actually it makes sense to have such systems have access to the world for testing purposes. Here is the latest request: A newly developed system that uses SIP is in the final stages of development. This system will enable communication with outside users (that is its purpose and the research proposal), actually hospital patients not so well aware of technology. So it makes sense to open it to the rest of the world. What I am looking for is anyone who has experience with dealing with such highly experimental systems that need wide outside network access. How do you secure the rest of the network and systems from this security nightmare without hindering research? Is placement in the DMZ enough? Any extra precautions? Any other options, methodologies?

  Read the article

• Total newb having SSH and remote MySQL access problems

  - by kscott

  I don't often work with linux or need to SSH into remote MySQL databases, so pardon my ignorance. For months I had been using the HeidiSQL client application to remotely access a MySQL database. Today two things happened: the DB moved to a new server and I updated HeidiSQL, now I cannot log in to the MySQL server, when attempting I get this message from Heidi: SQL Error (2003) in statement #0: Can't connect to MySQL server on 'localhost' (10061) If I use Putty, I can connect to the server and get MySQL access through command line, including fetching data from the DB. I assume this means my credentials and address are correct, but do not understand why putting those same details into HeidiSQL's SSH tunnel info won't work. I also downloaded the MySQL Workbench and attempted to set up a connection through that client and got this message: Cannot Connect to Database Server Your connection attempt failed for user 'myusername' from your host to server at localhost:3306: Lost connection to MySQL server at 'reading initial communication packet', system error: 0 Please: 1 Check that mysql is running on server localhost 2 Check that mysql is running on port 3306 (note: 3306 is the default, but this can be changed) 3 Check the myusername has rights to connect to localhost from your address (mysql rights define what clients can connect to the server and from which machines) 4 Make sure you are both providing a password if needed and using the correct password for localhost connecting from the host address you're connecting from From Googling around I see that it could be related to the MySQL bind-address, but I am a third party sub-contractor with no access to the MySQL settings of this box and the system admin is assuring me that I'm an idiot and need to figure it out on my end. This is completely possible but I don't know what else to try. Edit 1 - The client settings I am using In Heidi and MySQL Workbench I am using the following: SSH host + port: theHostnameOfTheRemoteServer.com:22 {this is the same host I can Putty to} SSH Username: mySSHusername {the same user name I use for my Putty connection} SSH Password: mySSHpassword {the same password for the Putty connection} Local port: 3307 MySQL host: theHostnameOfTheRemoteServer.com MySQL User: mySQLusername {which I can connect with once in with Putty} MySQL Password: mySQLpassword {which works once in with Putty} Port: 3306

  Read the article

• Thin client - cloud machine - to run via iPad, iPhone, most Androids etc

  - by Carl Lindberg

  I'm tired of having a laptop macbook that breaks down or having files that I need to sync via dropbox etc all the time via the machines to different OS installations. It sucks. I want a thin client where I can login on any machine - my iPhone, PC desktop, iPad etc to one running machine. I would like to replace a modernly powerful desktop iMac with a thin client running via my iPad. I will connect the iPad with a keyboard/mouse too so you get the idea. But I want to be able to use some of the Android phones as well (I guess most Android phones today has a good enough performance/resolution etc to run a thin client). Of course it has to be able to have input/output in sound. Printing can be solved by PDF/emailing etc - so no direct communication to the printer ports to USB etc is necessary. Is there such a service today? It should cost somewhere under something like $40/ month. I will run stuff like CPU heavy duty ableton for music production, xCode for making iOS apps, some games etc. And on the thin client also run virtual machines. VM of Ubuntu and Windows.

  Read the article

• Port forwarding on D-Link DIR-615 super-slow, useless

  - by Jaroslav Záruba

  Hello I have replaced my old router with DIR-615 from D-Link, and now the port forwarding is so slow it makes the router practically useless for requests coming from outside of my network. Accessing the router itself (admin UI) from outside is without any issues, no delay whatsoever. But when I try to access a service residing on any of the computers in my network from outside the requests take minutes and minutes. (E.g. I can see source of my GWT-app main page, but loading additional CSS and JS files takes years.) If anyone could recommend any further diagnostics I should do to figure out what is happening it would be great. Few notes: happens with more services (web-app on Tomcat, viewing directory index via Apache) it does not make a difference whether the service is hosted on wired or wireless PC accessing the service on a localhost works fine, as does any 'inner' communication turning off firewall on target PC does not make difference either (makes sense) when I replace this router with the old one (both 192.168.1.1) everything works fine I see nothing suspicious in the router's log I believe I have the latest firmware (4.11) DIR-615 sucks, it already died once completely Regards Jarda Z.

  Read the article

• Hubs/switches taking out switches?

  - by Bart Silverstrim

  Here's the issue...we have a network with a lot of Cisco switches. Someone plugged in a hub on the network, and then we started seeing "weird" behavior; errors in communication between clients and servers, or network timeouts, dropping network connections, etc. It seemed that somehow that hub (or SOHO switch) was particularly freaking out our Cisco 3700 series switches. Disconnect that hub or netgear-type SOHO switch and things settled down again. We're in the process of trying to get a centralized logging server for SNMP and management, etc., to see if we can trap errors or narrow down when someone does this sort of thing without our knowledge because things seem to work, for the most part, without issue, we just get freaky oddball incidents on particular switches that don't seem to have any explanation until we find out someone decided to take matters into their own hands to expand available ports in their room. Without getting into procedure changes or locking down ports or "in our organization they'd be fired" answers, can someone explain why adding a small switch or hub, not necessarily a SOHO router (even a dumb hub apparently caused the 3700's to freak out) sending DHCP request out, will cause issues? The boss said it's because the Cisco's are getting confused because that rogue hub/switch is bridging multiple MAC's/IP's into one port on the Cisco switches and they just choke on that, but I thought their routing tables should be able to handle multiple machines coming into the port. Anyone see that behavior before and have a clearer explanation of what's happening? I'd like to know for future troubleshooting and better understanding that just waving my hand and saying "you just can't".

  Read the article

• how to maitain the authentication details/passwords in a 50 people company

  - by sabya

  What is the process that you guys follow to maintain authentication details like login ids and passwords? There will be definitely some shared passwords. So, the target is to minimize the impact when someone is leaving the company. By "shared password", I mean, the account, which is shared among multiple people in the company. The issues that the process should address are: - Affected areas. Quickly find the resources to which the leaving user was having access to. Forgetting password. What happens if a user forgets an authentication details? How does he get it? I think he shouldn't ask a team mate. I mean no-verbal communication. Find dependencies of a resource. Suppose I am changing the password for a mail account, which is getting used by some automated scripts to send mails. Here, the scripts are dependent on the mail account, so changing the password of the mail account means we have to change the password in the script too. So, how do find all the dependencies of a resource? I'd prefer a process which addresses these issues. But you can also recommend products which are open source and not hosted. I have gone through PassPack, but they don't solve #4. There is a similar question here. But that does not exactly answer my question.

  Read the article

• BizTalk Testing Series - The xpath Function

  - by Michael Stephenson

  Background While the xpath function in a BizTalk orchestration is a very powerful feature I have often come across the situation where someone has hard coded an xpath expression in an orchestration. If you have read some of my previous posts about testing I've tried to get across the general theme like test-driven or test-assisted development approaches where the underlying principle is that your building up your solution of small well tested units that are put together and the resulting solution is usually quite robust. You will be finding more bugs within your unit tests and fewer outside of your team. The thing I don't like about the xpath functions usual usage is when you come across an orchestration which has something like the below snippet in an expression or assign shape: string result = xpath(myMessage,"string(//Order/OrderItem/ProductName)"); My main issue with this is that the xpath statement is hard coded in the orchestration and you don't really know it works until you are running the orchestration. Some of the problems I think you end up with are: You waste time with lengthy debugging of the orchestration when your statement isn't working You might not know the function isn't working quite as expected because the testable unit around it is big You are much more open to regression issues if your schema changes     Approach to Testing The technique I usually follow is to hold the xpath statement as a constant in a helper class or to format a constant with a helper function to get the actual xpath statement. It is then used by the orchestration like follows. string result = xpath(myMessage, MyHelperClass.ProductNameXPathStatement); This means that because the xpath statement is available outside of the orchestration it now becomes testable in its own right. This means: I can test it in its own right I'm less likely to waste time tracking down problems caused by an error in the statement I can reduce the risk or regression issuess I'm now able to implement some testing around my xpath statements which usually are something like the following:    The test will use a sample xml file The sample will be validated against the schema The test will execute the xpath statement and then check the results are as expected     Walk-through BizTalk uses the XPathNavigator internally behind the xpath function to implement the queries you will usually use using the navigators select or evaluate functions. In the sample (link at bottom) I have a small solution which contains a schema from which I have generated a sample instance. I will then use this instance as the basis for my tests.     In the below diagram you can see the helper class which I've encapsulated my xpath expressions in, and some helper functions which will format the expression in the case of a repeating node which would want to inject an index into the xpath query.             I have then created a test class which has some functions to execute some queries against my sample xml file. An example of this is below.         In the test class I have a couple of helper functions which will execute the xpath expressions in a similar way to BizTalk. You could have a proper helper class to do this if you wanted.         You can see now in the BizTalk expression editor I can use these functions alongside the xpath function.         Conclusion I hope you can see with very little effort you can make your life much easier by testing xpath statements outside of an orchestration rather than using them directly hard coded into the orchestration.     This can also save you lots of pain longer term because your build should break if your schema changes unexpectedly causing these xpath tests to fail where as your tests around the orchestration will be more difficult to troubleshoot and workout the cause of the problem.     Sample Link The sample is available from the following link: http://code.msdn.microsoft.com/testbtsxpathfunction     Other Tools On the subject of using the xpath function, if you don't already use it the below tool is very useful for creating your xpath statements (thanks BizBert) http://www.bizbert.com/bizbert/2007/11/30/XPath+The+Hidden+Language+Of+BizTalk.aspx

  Read the article

• My First Iteration Zero

  - by onefloridacoder

  I recently watched a web cast that covered the idea of planning from the concept stage to the product backlog.  It was the first content I had seen related to Iteration Zero and it made a lot of sense from a planning and engagement perspective where the customer is concerned.  It illuminated some of the problems I’ve experienced with getting a large project of the ground.  The idea behind this is to just figure out get everyone to understand what needs to be constructed and to build the initial feature set from a *very* high level.  Once that happens other parts of the high level construction start to take place.  You end up with a feature list that describes what the business wants the system to do, and what it potentially may (or may not) interact with.  Low tech tools are used to create UI mockups that can be used as a starting point for some of the key UI pieces. Toward the end of the webcast they speaker introduced something that was new to me.  He referred to it as an executable skeleton or the steel thread.  The idea with this part of the webcast was to describe walking through the different mocked layers of the application.  Not all layers and collaborators are involved at this stage since it’s Iteration Zero, and each layer is either hard-coded or completely mocked to provide a 35K foot view of how the different layers layers work together.  So imagine two actors on each side of a layer diagram and the flow goes down from the upper left side down through a a consumer, thorough a service layer and then back up the service layer to the destination/actor. I would imagine much could be discussed moving through new/planned or existing/legacy layers, or a little of both to see what’s implied by the current high-level design. One part of the web cast has the business and design team creating the product box (think of your favorite cereal or toy box) with all of the features and even pictures laid out on the outside of the box.  The notion here is that if you handed this box to someone and told them your system was inside they would have an understanding of what the system would be able to do, or the features it could provide.    One of the interesting parts of the webcast was where the speaker described that he worked with a couple of groups in the same room and each group came up with a different product box – the point is that each group had a different idea of what the system was supposed to do.  At this point of the project I thought that to be valuable considering my experience has been that historically this has taken longer than a week to realize that the business unit and design teams see the high level solution differently.  Once my box is finished I plan on moving to the next stage of solution definition which is to plan the UI for this small application using Excel, to map out the UI elements.  I’m my own customer so it feels like cheating, but taking these slow deliberate steps have already provided a few learning opportunities.    So I resist the urge to load all of my user stories into my newly installed VS2010  TFS project and try to reduce or add to, the number of user stories and/or refine the high level estimates I’ve come up with so far.

  Read the article

• How to Build Services from Legacy Applications

  - by Chris Falter

  The SOA consultants invaded the executive suite at your company or agency, preached the true religion, and converted the unbelievers. Now by divine imperative you must convert your legacy applications into a suite of reusable services.  But as usual, you lack the time and resources that you need in order to develop the services properly.  So you googled or bing’ed, found this blog post, and began crying in gratitude.  Yes, as the title implies, I am going to reveal my easy, 3-step, works-every-time process for converting silos of legacy applications into the inventory of services your CIO has been dreaming about.  So just close your eyes and count to 3 … now open them … and here it is…. Not. While wishful thinking is too often the coin of the IT realm, even the most naive practitioner knows that converting legacy applications into reusable services requires more than a magic wand.  The reason is simple: if your starting point is your legacy applications, then you will simply be bolting a web service technology layer on top of your legacy API.  And that legacy API is built in the image of the silo applications.  Enter the wide gate of the legacy API, follow the broad path of generating service interfaces from existing code, and you will arrive at the siloed enterprise destruction that you thought you were escaping. The Straight and Narrow Path This past week I had the opportunity to learn how the FBI Criminal Justice Information Systems department has been transitioning from silo applications to a service inventory.  Lafe Hutcheson, IT Specialist in the architecture group and fellow attendee at an SOA Architect Certification Workshop, was my guide.  Lafe has survived the chaos of an SOA initiative, so it is not surprising that he was able to return from a US Army deployment to Kabul, Afghanistan with nary a scratch.  According to Lafe, building their service inventory is a three-phase process: Model a business process.  This requires intense collaboration between the IT and business wings of the organization, of course.  The FBI uses IBM Websphere tools to model the process with BPMN. Identify candidate services to facilitate the business process. Convert the BPMN to an executable BPEL orchestration, model and develop the services, and use a BPEL engine to run the process.  The FBI uses ActiveVOS for orchestration services. The 12 Step Program to End Your Legacy API Addiction Thomas Erl has documented a process for building a web service inventory that is quite similar to the FBI process. Erl’s process adds a technology architecture definition phase, which allows for the technology environment to influence the inventory blueprint.  For example, if you are using an enterprise service bus, you will probably not need to build your own utility services for logging or intermediate routing.  Erl also lists a service-oriented analysis phase that highlights the 12-step process of applying the principles of service orientation to modeling your services.  Erl depicts the modeling of a service inventory as an iterative process: model a business process, define the relevant technology architecture, define the service inventory blueprint, analyze the services, then model another business process, rinse and repeat.  (Astute readers will note that Erl’s diagram, restricted to analysis and modeling process, does not include the implementation phase that concludes the FBI service development methodology.) The service-oriented analysis phase is where you find the 12 steps that will free you from your legacy API addiction. In a nutshell, you identify the steps in the process that need services; identify the different types of services (agnostic entity services, service compositions, and utility services) that are required; apply service-orientation principles; and normalize the inventory into cohesive service models. Rather than discuss each of the 12 steps individually, I will close by simply referring my readers to Erl’s explanation.

  Read the article

• Apache2.2 not responding on Windows 7 desktop

  - by Adam

  Afternoon! I'm having some trouble with Apache2.2 on Windows 7. For over a year it's been running no problem, but all of a sudden requests have just stopped responding. They don't ever time out, the browser just keeps on waiting for a response, which makes me think it's something blocking communication with Apache. Interestingly though, if I stop Apache the requests fail immediately. The Apache service is running, and using netstat I can see it listening on port 80 as configured: TCP 127.0.0.1:80 0.0.0.0:0 LISTENING If I stop the Apache service, that line disappears. I have an entry within my hosts file for each VHost I'm trying, all pointing to 127.0.0.1. Each VHost is configured to *:80. Nothing however is getting recorded in the access or error (at debug level) log files. I've verified the file paths are correct, even though they were never changed. Neither is anything getting recorded within Windows' Event Log. The problem showed up when I added a new VHost and restarted, however I hadn't been using it for a couple of days prior so I don't believe it's the config change. I have performed a syntax check to be sure, and when starting from the command prompt no errors are reported there. I do have Windows Firewall running, however I've verified the Apache rule is correct and tried turning it off to ensure that wasn't the problem. I've reinstalled Apache, in the hope it might magically fix something using the default config, but still no joy. I've also tried using a different port. I'm completely lost for ideas now. Can anybody help? Cheers Adam

  Read the article

• Slow boot for OS and external devices

  - by Derek Van Cuyk

  I have been having this problem intermittently but as of yesterday, it has become more consistent. It originally started when I rebooted my PC at home and the OS (Windows 8) sat in a loop appearing to do nothing while loading. I figured since this was a new installation, that something may have just become corrupted and I decided to reinstall. So I tried to boot off of the thumb drive which had the installation iso and encountered pretty much the same issue. Same with the DVD drive. So, I rebooted once again and left it to load the entire night just to see if it ever would and sure enough this morning, Windows had finally loaded. Authentication had the same roblem albeit not quite as long (took about 5 minutes to authenticate). However, once I was in, everything appeared to be working fine and as quick as normal with the exception of when I tried to scan the C drive for any errors, which ran unbearably slow (45 minutes and before I left for work and was not finished scanning a 64GB SSD drive). I mention that I have had this issue but never when loading the OS. Before it occurred when trying to install windows 7 from a different DVD drive than the one I have now. It took me about 3 hours to do it since I had to wait sometimes 30+ min for each step to finish processing. Does anyone have an idea as to what can cause this? I am assuming it is the motherboard since it is responsible for communication with all the devices I'm having issues with but I cannot find anyone else who has had a problem like this and don't want to drop more money on a MB if it isn't the problem. Hardware: Motherboard: Asus M4A78T-E Socket AM3/ AMD 790GX/ Hybrid CrossFireX Hard Drive: Kingston SSDNow V+180 64GB Micro SATA II 3GB/S 1.8 Inch Solid State Drive SVP180S2/64G Optical Drive: Samsung Blu-Ray Combo Internal 12XReadable and DVD-Writable Drive with Lightscribe SH-B123L/BSBP Thanks, Derek

  Read the article

• Cannot connect to Solaris Server when Oracle GoldenGate process uses the port

  - by Abdallah Ghrb

  I'm trying to test the Oracle goldengate to replicate data between two databases on the same server. So I installed two databases and two goldengate homes in the same machine. The goldengate processes are started from each home and they are responsible for the replication : Process from home 1 configured on port 7809 & process for home 2 configured on port 7810. For a successful replication, processes started from goldengate home 1 should communicate with processes started from goldengate home 2. But for some reasons, this is not happening. The goldengate log file has the following error : OGG-01223 Oracle GoldenGate Capture for Oracle, exthrr.prm: TCP/IP error 131 (Connection reset by peer). "Googling" for this error, it said that the connection occurred but the host terminated it. Tried to telnet the machine with the used port and it gave the following error: bash-3.00$ telnet 10.10.3.124 7810 Trying 10.10.3.124... Connected to 10.10.3.124. Escape character is '^]'. Connection to 10.10.3.124 closed by foreign host. Here the communication occurs but for only around 3 seconds then it is closed by the host, which is the same explanation of the above error in the goldengate log file. I tried to change the port but still the same error. The problem is happening only when the goldengate process is using the port. When other process is using the same port, I can telnet successfully.

  Read the article

• Postfix unable to find local server

  - by Andrew

  I'm working with postfix on fedora 9 and I'm attempting to make some changes to a system setup by my predecessor. Currently the postfix server on [mail.ourdomain.com] is setup to forward mail sent to two addresses to another server for processing. The other server [www01.ourdomain.com] receives the email and sends it to a PHP script to be processed. Then that PHP script generates and sends a response to the user who sent the original email. We're adding more web servers to the system and as a result we've decided to move these processing scripts to our admin [admin.ourdomain.com] server to make them easier to keep track of. I've already setup and tested the processing scripts on [admin.ourdomain.com], and on the mail server doing the forwarding [mail.ourdomain.com] I added [admin.ourdomain.com] to /etc/hosts and also added another, aside from the one for [www01.ourdomain.com], entry to /etc/postfix/transport for [admin.ourdomain.com]. I also restarted postfix as well. I've tested the communication from [mail.ourdomain.com] to [admin.ourdomain.com] using telnet and the [admin.ourdomain.com] domain and everything runs correctly. But as soon as I change the forward address and attempt to send an email to the mail server I get a bounce message stating "Host or domain name not found. Name service error for name=admin.ourdomain.com type=A: Host not found". If I change the forward settings back to [www01.ourdomain.com] then everything works fine. Is there some setting I'm missing in Postfix? The server itself and telnet work fine it just seems to be postfix that's not able to discover the location of [admin.ourdomain.com].

  Read the article

• Some free cloud solution to enhance your business

  - by Saif Bechan

  I am co-owner of a small internet business. I am in charge of IT, and I try to get things done as low cost as possible. When investing in servers, resources and overall business costs your project can soon turn into a financial disaster. Cloud solutions can help you in solving some financial problems, they can help you in scalability problems, and overall performance problems of your server or web application. Recently I moved the whole internal/external communication(email,calendar,documents) of my business to the cloud. I did this by using the free version of Google Apps. This works great and is a big advantage on multiple levels. I do not have to fight spam anymore on my system, and there are less resources used on my system. Also switching servers will go a lot easier. Questions Can you name some cloud solution that you have used, or some you just recommend. They can fairy form financial benefits, organizational benefits, performance benefits. It doesn't matter as soon as it helps you spread the load of your business.

  Read the article

• Setting kernel memory for installing postgresql

  - by Matthieu Taymans

  My question is about setting the kernel shared memory for installing postgresql on mac osx 10.6.8. In the readme file of postgresql it is said: Shared Memory PostgreSQL uses shared memory extensively for caching and inter-process communication. Unfortunately, the default configuration of Mac OS X does not allow suitable amounts of shared memory to be created to run the database server. Before running the installation, please ensure that your system is configured to allow the use of larger amounts of shared memory. Note that this does not 'reserve' any memory so it is safe to configure much higher values than you might initially need. You can do this by editting the file /etc/sysctl.conf - e.g. % sudo vi /etc/sysctl.conf On a MacBook Pro with 2GB of RAM, the author's sysctl.conf contains: kern.sysv.shmmax=1610612736 kern.sysv.shmall=393216 kern.sysv.shmmin=1 kern.sysv.shmmni=32 kern.sysv.shmseg=8 kern.maxprocperuid=512 kern.maxproc=2048 Note that (kern.sysv.shmall * 4096) should be greater than or equal to kern.sysv.shmmax. kern.sysv.shmmax must also be a multiple of 4096. Once you have edited (or created) the file, reboot before continuing with the installation. If you wish to check the settings currently being used by the kernel, you can use the sysctl utility: % sysctl -a The database server can now be installed. I'm a real beginner with all this but need to instal postgresql for academic purposes do you know how i can set this kernel shared memory. Won't that be harmful for my system? Thank you in advance. Matthieu

  Read the article

• Silverlight Cream for January 15, 2011 -- #1028

  - by Dave Campbell

  Note to #1024 Swag Winners: I'm sending emails to the vendors Sunday night, thanks for your patience (a few of you have not contacted me yet) In this Issue: Ezequiel Jadib, Daniel Egan(-2-), Page Brooks, Jason Zander, Andrej Tozon, Marlon Grech, Jonathan van de Veen, Walt Ritscher, Jesse Liberty, Jeremy Likness, Sacha Barber, William E. Burrows, and WindowsPhoneGeek. Above the Fold: Silverlight: "Building a Radar Control in Silverlight - Part 1" Page Brooks WP7: "Tutorial: Dynamic Tile Push Notification for Windows Phone 7" Jason Zander Training: "WP7 Unleashed Session I–Hands on Labs" Daniel Egan From SilverlightCream.com: Silverlight Rough Cut Editor SP1 Released Ezequiel Jadib has an announcement about the Rough Cut Editor SP1 release, and he walks you through the content, installation and a bit of the initial use. WP7 Unleashed Session I–Hands on Labs Daniel Egan posted Part 1 of 3 of a new WP7 HOL ... video online and material to download... get 'em while they're hot! WP7 Saving to Media Library Daniel Egan has another post up as well on saving an image to the media library... not the update from Tim Heuer... all good info Building a Radar Control in Silverlight - Part 1 This freakin' cool post from Page Brooks is the first one of a series on building a 'Radar Control' in Silverlight ... seriously, go to the bottom and run the demo... I pretty much guarantee you'll take the next link which is download the code... don't forget to read the article too! Tutorial: Dynamic Tile Push Notification for Windows Phone 7 Jason Zander has a nice-looking tutorial up on dynamic tile notifications... good diagrams and discussion and plenty of code. Reactive.buffering.from event. Andrej Tozon is continuing his Reactive Extensions posts with this one on buffering: BufferWithTime and BufferWIthCount ... good stuff, good write-up, and the start of a WP7 game? MEFedMVVM with PRISM 4 Marlon Grech combines his MEFedMVVM with Prism 4, and says it was easy... check out the post and the code. Adventures while building a Silverlight Enterprise application part #40 Jonathan van de Veen has a discussion up about things you need to pay attention to as your project gets close to first deployment... lots of good information to think about Silverlight or not. Customize Windows 7 Preview pane for XAML files Walt Ritscher has a (very easy) XAML extension for Windows 7 that allows previewing of XAML files in an explorer window... as our UK friends say "Brilliant!" Entity Framework Code-First, oData & Windows Phone Client From the never-ending stream of posts that is Jesse Liberty comes this one on EF Code-First... so Jesse's describing Code-First and OData all wrapped up about a WP7 app Sterling Silverlight and Windows Phone 7 Database Triggers and Auto-Identity Sterling and Database Triggers sitting in a tree... woot for WP7 from Jeremy Likness... provides database solutions including Validation, Data-specific concerns such as 'last modified', and post-save processing ... all good, Jeremy! A Look At Fluent APIs Sacha Barber has a great post up that isn't necessarily Silverlight, but is it? ... we've been hearing a lot about Fluent APIs... read on to see what the buzz is. Windows Phone 7 - Part 3 - Final Application William E. Burrows has Part 3 of his WP7 tutorial series up... this one completing the Golf Handicap app by giving the user the ability to manage scores. User Control vs Custom Control in Silverlight for WP7 WindowsPhoneGeek has a great diagram and description-filled post up on User Controls and Custom Controls in WP7... good external links too. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Websockets Server with Fault-Tolerance and Durable Message Store

  - by smitchell360

  I am starting to experiment with websockets. Does anyone know of a websockets server (open source or paid) that provides a durable store of the websocket "channel"? All of the examples that I have found do not address durability -- if a websockets server goes down, all "channel" data is lost. Services such as Pusher do not really discuss whether they address the durability issue (and I have not received a response from tech support yet). Happy to roll my own, but would rather not reinvent the wheel. EDIT: I'm not looking for websockets 101 information. That is readily available and understood. I'm looking for a server (open source or paid) that supports websockets and has a durable store for the websocket data so that, in the event that a server fails, a new server can take over where the original one left off. Two main purposes: 1. support failover scenarios contemplated by the websockets Network Working Group http://tools.ietf.org/html/draft-ibc-websocket-dns-srv-02#section-5.1 (most importantly so that missed messages are sent when a client connects to a failover server) 2. support scenarios where new subscribers must receive all past messages that were published. Of course this can be handled at the application layer...but that is not what I am looking for. EDIT So, after some research the following installed options seem to be the most robust: Kaazing Migratory Migratory (http://migratory.ro) Hosted services that seem "real" Pusher (great API but no history feature yet) PubNub (has history) All of the above services have graceful fallback to other communication methods if websockets are not available. I was not able to find any open source that provided "out of the box" clustering, fail-over, and a durable message store to play back history. There are some projects that may serve as good starting points, but not exactly what I am looking for.

  Read the article

• What's next for all of these Microsoft "overlapping" and "enhanced" products ?

  - by indyvoyage

  Recently I attended a road show, organised by MS Gold Partner company in the UK. The products discussed were: SharePoint server (2010 and 2007), Exchange server, Office Communication Server 2007, Exchange hosted services Office Live meeting, Office Communicator, System Center Configuration Manager and Operation Manager, VMware, Windows 7 etc. As Microsoft claims the enhancement in the each product against higher version, I felt that clients are not much interested in all these details. For example Office Communicator, surely they have improved a lot the product and first site all said 'WOW' great product, but nobody wish to pay money for all these extra features. Some argued, they are bogged down by all these increased number of menus. They don't need soft call feature included with mobile call. It apply for all other products as well such as MS office (next what 2 ribbons ?), windows OS and many more. Indeed there must be good features in all these products, but is it worth to spend money and time to update the older system ? Also sometimes these feature will decrease the productivity instead increase it. *So do you think what ever enhancement MS is doing in the products is only for selling purpose, not a real use ?? and I think also keep the developer busy learning the new tools and features. * I am sure some some people here will argue that some people need this sort of features. But I am not talking about NASA or MI5 guys. I am talking of usual businesses and joe public. Any ideas welcome.

  Read the article

• Connecting 2 different subnet masks

  - by Jonathan

  I'm no network genius, but I have managed to get most things running. I get confused about subnets and gateways though. We have an office server connected to around 20 PC's that all communicate fine. We have just gotten a cutting machine that won't connect to our network. The server has DHCP, but that fails on the cutting machine, so I've been trying to set the IP manually. Server details are as follows: IP: 10.1.1.12 SUBNET: 255.255.255.0 GATEWAY: 10.1.1.1 Internet connection is via the modem which is 10.1.1.1 An office PC is ussually set up through DHCP and has the following settings: IP: 10.1.1.36 SUBNET: 255.255.255.0 GATEWAY: 10.1.1.1 PRIMARY DNS: 10.1.1.12 Cutting Machine computer has 2 network ports. 1 is specifically for the communication between the PC and the cutting machine. It's details must be as follows: IP: 10.100.100.2 SUBNET: 255.255.255.252 GATEWAY: BLANK The other network port need to connect to the server. I was told that the IP and SUBNET need to be as follows: IP: 10.100.100.1 SUBNET: 255.255.255.252 GATEWAY: ?? How can I connect this port to the server and/or the internet. If anyone can offer assistance, it would really be appreaciated.

  Read the article

• The Power to Control Power

  - by speakjava

  I'm currently working on a number of projects using embedded Java on the Raspberry Pi and Beagle Board.  These are nice and small, so don't take up much room on my desk as you can see in this picture. As you can also see I have power and network connections emerging from under my desk.  One of the (admittedly very minor) drawbacks of these systems is that they have no on/off switch.  Instead you insert or remove the power connector (USB for the RasPi, a barrel connector for the Beagle).  For the Beagle Board this can potentially be an issue; with the micro-SD card located right next to the connector it has been known for people to eject the card when trying to power off the board, which can be quite serious for the hardware. The alternative is obviously to leave the boards plugged in and then disconnect the power from the outlet.  Simple enough, but a picture of underneath my desk shows that this is not the ideal situation either. This made me think that it would be great if I could have some way of controlling a mains voltage outlet using a remote switch or, even better, from software via a USB connector.  A search revealed not much that fit my requirements, and anything that was close seemed very expensive.  Obviously the only way to solve this was to build my own.Here's my solution.  I decided my system would support both control mechanisms (remote physical switch and USB computer control) and be modular in its design for optimum flexibility.  I did a bit of searching and found a company in Hong Kong that were offering solid state relays for 99p plus shipping (£2.99, but still made the total price very reasonable).  These would handle up to 380V AC on the output side so more than capable of coping with the UK 240V supply.  The other great thing was that being solid state, the input would work with a range of 3-32V and required a very low current of 7.5mA at 12V.  For the USB control an Arduino board seemed the obvious low-cost and simple choice.  Given the current requirments of the relay, the Arduino would not require the additional power supply and could be powered just from the USB.Having secured the relays I popped down to Homebase for a couple of 13A sockets, RS for a box and an Arduino and Maplin for a toggle switch.  The circuit is pretty straightforward, as shown in the diagram (only one output is shown to make it as simple as possible).  Originally I used a 2 pole toggle switch to select the remote switch or USB control by switching the negative connections of the low voltage side.  Unfortunately, the resistance between the digital pins of the Arduino board was not high enough, so when using one of the remote switches it would turn on both of the outlets.  I changed to a 4 pole switch and isolated both positive and negative connections. IMPORTANT NOTE: If you want to follow my design, please be aware that it requires working with mains voltages.  If you are at all concerned with your ability to do this please consult a qualified electrician to help you.It was a tight fit, especially getting the Arduino in, but in the end it all worked.  The completed box is shown in the photos. The remote switch was pretty simple just requiring the squeezing of two rocker switches and a 9V battery into the small RS supplied box.  I repurposed a standard stereo cable with phono plugs to connect the switch box to the mains outlets.  I chopped off one set of plugs and wired it to the rocker switches.  The photo shows the RasPi and the Beagle board now controllable from the switch box on the desk. I've tested the Arduino side of things and this works fine.  Next I need to write some software to provide an interface for control of the outlets.  I'm thinking a JavaFX GUI would be in keeping with the total overkill style of this project.

  Read the article

• Virtual Machine Network Architecture, Isolating Public and Private Networks

  - by Mark

  I'm looking for some insight into best practices for network traffic isolation within a virtual environment, specifically under VMWARE ESXi. Currently I have (in testing) 1 hardware server running ESXi but i expect to expand this to multiple pieces of hardware. The current setup is as follows: 1 pfsense VM, this VM accepts all outside (WAN/internet) traffic and performs firewall/port forwarding/NAT functionality. I have multiple public IP addresses sent to the this VM that are used for access to individual servers (via per incoming IP port forwarding rules). This VM is attached to the private (virtual) network that all other VMs are on. It also manages a VPN link into the private network with some access restrictions. This isn't the perimeter firewall but rather the firewall for this virtual pool only. I have 3 VMs that communicate with each other, as well as have some public access requirements: 1 LAMP server running an eCommerce site, public internet accessible 1 accounting server, access via windows server 2008 RDS services for remote access by users 1 inventory/warehouse management server, VPN to client terminals in warehouses These servers constantly talk with each other for data synchronization. Currently all the servers are on the same subnet/virtual network and connected to the internet through the pfsense VM. The pfsense firewall uses port forwarding and NAT to allow outside access to the servers for services and for server access to the internet. My main question is this: Is there a security benefit to adding a second virtual network adapter to each server and controlling traffic such that all server to server communication is on one separate virtual network, while any access to the outside world is routed through the other network adapter, through the firewall, and on the the internet. This is the type of architecture i would use if these were all physical servers, but i'm unsure if the networks being virtual changes the way i should approach locking down this system. Thank you for any thoughts or direction to any appropriate literature.

  Read the article

• Backup Exec 10 - Network connection to the remote agent has been lost

  - by jherlitz

  Okay, so I have 4 remote offices, all running off of a 3mb ethernet connection. Two sites are part of a WAN and 2 sites are using 3mb connections over a site to site tunnel. I am using Backup Exec 2010, I have the remote agent installed on all the remote servers. For the past few weeks now, on the two sites running over the site to site tunnel have been failing with the following error message now. "The network connection to the Backup Exec Remote Agent has been lost. Check for network errors" We used to be on a DSL connection site to site tunnel, now we changed to the 3mb ethernet connection using site to site tunnel. I have to find out, has it been failing ever since we changed, or just recently. Backup exec support is telling me it is a network issue. My communication or connection to the server is solid, we don't have any issues, or outages. So I am baffled on why this continues to fail. And why just those two sites.. Any advice?

  Read the article

• TCP Handshake and port numbers

  - by Guido

  (I have a question about the TCP handshake and how port numbers are assigned, if this does not belong here, let me know.) Hi, I'm studying TCP/IP from the book "Internetworking with TCP/IP" by Douglas Comer. In the TCP chapter it mentions that TCP defines an "endpoint" as a pair (IP address, port number), and a connection is defined by two endpoints. This has a few implications, such as, a local TCP port could be in several connections at once, as long as there are no two from the same IP and the same remote port. This also means that the amount of established connections is almost limitless (2^16 for every IPv4 address. 2^48 in total). Now, in class, I was told that when one connects to a listening port, both sides agree on a different port to use, so the communication can happen and the listener socket remains free. This was also my belief before reading the book. Now I feel like I should obviously trust the book (It's Comer!), but is there any truth to the other explanation? Thanks

  Read the article

• Triple monitor setting in Linux with USB-HDMI adapter

  - by Oscar Carballal

  I'm trying to set up a triple monitor desktop at my office using Fedora 17, but it seems impossible, let me explain the setting: Laptop ASUS K53SD with 2 graphic cards, Intel and nVidia (Screen controled by Intel card) 24" Full HD monitor connected to the HDMI output (controlled by Intel card) 23" Full HD monitor connected to an USB-HDMI adapter (via framebuffer in /dev/fb2, apparently) VGA output (not used) controlled by nVidia card First of all, the USB-HDMI adapter works perfectly, it gives me a green screen (which means the communication is OK) and I can make it work if I set up a single monitor setting via framebuffer in Xorg. Here I leave the page where I got the instructions: http://plugable.com/2011/12/23/usb-graphics-and-linux Now I'm trying to set up the the two main monitors (laptop and 24") with the intel driver and the 23" with the framebuffer, but the most succesful configuration I get is the two main monitors working and the third disconnected. Do you have any idea what can I do to make this work? Here I leave my xRandr output and my Xorg conf: -> xrandr Screen 0: minimum 320 x 200, current 3286 x 1080, maximum 8192 x 8192 LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1366x768 60.0*+ 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA2 disconnected (normal left inverted right x axis y axis) HDMI1 connected 1920x1080+1366+0 (normal left inverted right x axis y axis) 531mm x 299mm 1920x1080 60.0*+ 50.0 25.0 30.0 1680x1050 59.9 1680x945 60.0 1400x1050 74.9 59.9 1600x900 60.0 1280x1024 75.0 60.0 1440x900 75.0 59.9 1280x960 60.0 1366x768 60.0 1360x768 60.0 1280x800 74.9 59.9 1152x864 75.0 1280x768 74.9 60.0 1280x720 50.0 60.0 1440x576 25.0 1024x768 75.1 70.1 60.0 1440x480 30.0 1024x576 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 720x576 50.0 848x480 60.0 720x480 59.9 640x480 72.8 75.0 66.7 60.0 59.9 720x400 70.1 DP1 disconnected (normal left inverted right x axis y axis) 1920x1080_60.00 60.0 The Xorg file: # Xorg configuration file for using a tri-head display Section "ServerLayout" Identifier "Layout0" Screen 0 "HDMI" 0 0 Screen 1 "USB" RightOf "HDMI" Option "Xinerama" "on" EndSection ########### MONITORS ################ Section "Monitor" Identifier "USB1" VendorName "Unknown" ModelName "Acer 24as" Option "DPMS" EndSection Section "Monitor" Identifier "HDMI1" VendorName "Unknown" ModelName "Acer 23SH" Option "DPMS" EndSection ########### DEVICES ################## Section "Device" Identifier "Device 0" Driver "intel" BoardName "GeForce" BusID "PCI:0:02:0" Screen 0 EndSection Section "Device" Identifier "USB Device 0" driver "fbdev" Option "fbdev" "/dev/fb2" Option "ShadowFB" "off" EndSection ############## SCREENS ###################### Section "Screen" Identifier "HDMI" Device "Device 0" Monitor "HDMI1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "USB" Device "USB Device 0" Monitor "USB1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

< Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >