Search Results

Search found 19940 results on 798 pages for 'edit distance'.

Page 108/798 | < Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >

• diagnostic software for wifi adapter

  - by Nathan Fellman

  I'm having trouble with my wifi connection. Is there any software out there that can help me determine if the problem is in the drivers or in the hardware? Regretfully, I'm working on Vista Edit: The problem I'm having is that the Vista reports that the wireless radio is connected, shows an IP and all, the router also shows that the computer is connected, but there's no connectivity. I can't logon to the router, and I can't even ping it. When I ping it I get the response: General Failure I have tried connecting with and without various wireless security protocols. I have tried disabling the wireless adapter and re-enabling it from the Device Manager I have tried updating the driver None of this has helped. When I connect via Ethernet (with a cable, that is), everything works fine. Edit: I'm not using any firewall on the computer, that I'm aware of. The IP address for the WIFI adapter is similar to the one for the LAN adapter. They differ by one.

  Read the article

• Linux,Apache,NetBeans,PHP == Windows,IIS/Cassini,Visual Studio,ASP.Net

  - by Neil Smith

  I've worked out how to get my linux based Netbeans PHP development machine to behave much like what happens when you create a new ASP.Net project in Visual Studio. Firstly create multiple PHP project in Netbeans,say for example mysite1 and mysite2. Next edit the apache2/sites-enabled/000-default file and add two virtualhost sections as below <VirtualHost 127.0.1.1> ServerName mysite1.localhost DocumentRoot /var/www/mysite1/ </VirtualHost> <VirtualHost 127.0.2.1> ServerName mysite2.localhost DocumentRoot /var/www/mysite2/ </VirtualHost> For each site you add, pick a different ip address similar to the above where I use the third octet to increment, next edit the etc/hosts file and add the following two lines 127.0.1.1 mysite1.localhost 127.0.2.1 mysite2.localhost Then in Netbeans, go to File->Project Properties click on 'Run Configuration' and set 'Project Url' to http://mysite1.localhost for the first project and http://mysite2.localhost for the second project. That will give you a PHP development box which develops multiple PHP projects similar to how a Visual Studio Windows based box handles multiple ASP.Net sites. Hope this helps someone :)

  Read the article

• Change permission of files with the owner 'apache'

  - by Dotty

  Hay, i have some files on my server with the owner set to "apache", I'm not quite sure how this happened. Anyway, i need to change the permission of these files to 0777 so i can download/edit them. However i cannot. I'm using a 1and1 Linux server and use Plesk to administrate it. I have the ability to login via SSH. However, if i run chmod or chown i get a "permission denied" error, and if i try to sudo chmod or chown it says the command cannot be found. When i go to edit my domain details, i get this option Shell access to server with FTP user's credentials and have these options /bin/sh /bin/bash /sbin/nologin /bin/bash (chrooted) /bin/rbash Any idea's how i should go about changing the permissions or changing the owner? Thanks

  Read the article

• de-assign alt + right arrow

  - by jcollum

  I'm trying to map View.NavigateBackward and View.NavigateBackward like so: View.NavigateBackward = Alt + LeftArrow View.NavigateForward = Alt + RightArrow Pretty simple to do in Visual Studio with the Keyboard Options dialog. OK so I've assigned the shortcuts and the NavigateBackward one is working. But NavigateForward, which used to be assigned to Edit.CompleteWord, is staying with its old assignment. I've checked that Edit.CompleteWord is assigned to 'Ctrl+K, W' but the Alt+RightArrow is still behaving as complete word. Is there something special about the arrow keys that I can't assign them? I want to do this so the mouse buttons behave the same in VS 2010 and my web browser. Works fine for the back button, but the forward button won't re-assign properly. Suggestions?

  Read the article

• How can I programmatically change the keyboard layout?

  - by Jason R. Coombs

  I want to run a shell command or script that will configure each of my Ubuntu Precise boxes to use the Dvorak keyboard layout as the default (and only) layout. With earlier versions, I was able to set the XKBVARIANT in /etc/default/keyboard but when I make this change in Precise (and reboot), the keyboard layout appears to be unaffected (both in console and in gnome). I tried also setting the XKBMODEL to pc105 and XKBLAYOUT to us, but that did not seem to help. I know I can set the layout for gnome using the 'keyboard layout' tool... but I want the change to affect the console, and I want to automate the process. How can I accomplish this? Edit: To clarify, I want to know how I can cause to change (using only a script or command-line) the keyboard layout to be Dvorak as the default and only keyboard layout for both Gnome and the console. I want this change to be persistent (survive reboots), just as it is when the change is made through the Keyboard Layout tool. Edit: Let me put it another way. If I had installed the operating system myself (which I did not because the OS was installed by the virtual machine infrastructure), I could have selected the desired keyboard layout at install time, and that layout would be applied persistently, system-wide. How can I change the layout to appear as if I had set it during the install process?

  Read the article

• Internet slow on one router only [the problem only in Ubuntu] [on hold]

  - by mrSuperEvening

  Internet works perfectly on every other router, but browsing sucks at home (slow browsing and slow loading times). I changed DNS servers to 8.8.0.0, still doesn't help. And funnily, download speed is extremely high on this network (meaning torrents for example), but using browsers and loading websites is extremely slow (only on this network). Do I need to change something in router settings or what can I try? By the way, I use wired connection to router. EDIT: There's no problems when using Windows. EDIT: ifconfig: eth0 Link encap:Ethernet HWaddr f2:4d:a0:c0:3f:4c inet addr:192.168.11.8 Bcast:192.168.11.255 Mask:255.255.255.0 inet6 addr: fe80::f24d:a2ff:fec6:3f4c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:206798 errors:0 dropped:0 overruns:0 frame:0 TX packets:219570 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:76680734 (76.6 MB) TX bytes:21738160 (21.7 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:160 errors:0 dropped:0 overruns:0 frame:0 TX packets:160 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:11094 (11.0 KB) TX bytes:11094 (11.0 KB)` ping -c 2 4.2.2.2 PING 4.2.2.2 (4.2.2.2) 56(84) bytes of data. --- 4.2.2.2 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1007ms ping -c 2 google.com PING google.com (213.159.32.147) 56(84) bytes of data. 64 bytes from lan-213-159-32-147.kns.skynet.lv (213.159.32.147): icmp_seq=1 ttl=61 time=0.936 ms 64 bytes from lan-213-159-32-147.kns.skynet.lv (213.159.32.147): icmp_seq=2 ttl=61 time=0.937 ms --- google.com ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 1001ms rtt min/avg/max/mdev = 0.936/0.936/0.937/0.030 ms

  Read the article

• archive all messages account on exchange 2003 receiving multiple copies

  - by aeolist

  Hello everyone I am using microsoft exchange 2003 on windows 2003 small business server. For the past month or so, the archiver account has been receiving multiple copies (about 15 or so) of each and every email. edit: All copies share the same Message ID. The machine that hosts exchange is updated religiously and an antivirus scan is run on a daily basis. So would anyone please have any ideas about how to deal with this and furthermore, how i would be able to delete the multiple copies of emails from outlook 2003 inbox. I will edit the entry, answering any questions or updating on my efforts Thanks in advance

  Read the article

• IIS 7.5 website application pool with 'full control' permissions hackable?

  - by Caroline Beltran

  Although I would never set this permission, I would like to know how a static html website with the permission mentioned in the title could be compromised. In my humble opinion, I would guess that this would pose no threat since a web visitor has no way to upload/edit/delete anything. What if the site was a simple PHP website that simply displayed ‘hello world’? What if this PHP site had a contact us form that was properly sanitized? Thank you EDIT: I should mention that restricting IIS to GET and POST requests only, otherwise people anybody can delete and upload content.

  Read the article

• Massive Xubuntu desktop malfunction

  - by viktiglemma

  I'm using Xubuntu 11.04. Before everything worked fine, but when booting today the following happened: 1) Window focus does not leave the first-opened program. This means that if I keep Firefox open, and open a terminal, window focus will never be transferred to the terminal. (EDIT: if I open a terminal first, and then open Firefox, Firefox steals focus) 2) Window menus have disappeared. The maximize, minimize, etc., buttons and menu are gone. 3) In Xfce Settings Manager, the "Window Manager" settings window is empty. There is just a gray screen there, so I cannot modify any window settings. 4) The keyboard shortcuts I had previously defined using the Settings Manager do no longer work. Further, ALT-TAB no longer works for cycling between windows. 5) The mouse pointer does not show when I first log in. I have to log out and log in again (with an invisible pointer) before the mouse shows itself. EDIT: 6) I cannot resize or move the Thunderbird window, but I can move the Firefox window What can I do to troubleshoot this?

  Read the article

• How to solve: "Connect to host some_hostname port 22: Connection timed out"

  - by Aufwind

  I have two Ubuntu machines. Both have openssh-client and openssh-server installed on them. ssh-ing from machine G (fresh Ubuntu 11.10 installation) to machine K works great. But ssh-ing from machine K to machine G results always in the Error: Connect to host some_hostname port 22: Connection timed out I went through the troubleshooting section of help.ubuntu.com and I got the following results: ps -A | grep sshd # results in 848 ? 00:00:00 sshd - sudo ss -lnp | grep sshd # results in 0 128 :::22 :::* users:(("sshd",848,4)) 0 128 *:22 *:* users:(("sshd",848,3)) - ssh -v localhost # works! - sudo ufw status verbose # yields: "Status: inactive" I haven't change anything in the config file. What can I do to locate the Problem and solve it? Glad about every hint! Edit: ping was succesful in both directions! I did a telnet <machineK> 22 from machin G which resulted in Trying and then in telnet: Unable to connect to remote host: Connection timed out. But telnet the other way around worked just fine! Edit 2: ssh start/running, process 966 # yields: ssh start/running, process 966 /etc/hostname # contains my hostname, let's call it blubb /etc/hosts # contains the following 127.0.0.1 localhost # 127.0.1.1 blubb 129.26.68.74 blubb # I added this! - sudo service ufw status # yields: ufw start/running I installed Gufw and set it to ON. Then I selected from Incoming the option ALLOW. Then I sshed to another machine from where I sshed back to my machine. Still the same error as above: connect to host blubb port 22: Connection timed out Any more hints, what I can check?

  Read the article

• Accessing second hard drive

  - by Jonathan

  So I recently installed Ubuntu 10.10 64-bit on my computer. I installed it on my 60gb SSD hard drive, and in the installation it never acknowledged the existence of my second hard drive. The hard drive that I keep all my files on, and which I want to make my home folder if I can, is a Western Digital Caviar Black 1TB SATA 6Gb/s 64MB cache (WD1002FAEX). I've read the following: https://help.ubuntu.com/community/Mount but honestly cannot work out how to access the hard drive from my Ubuntu installation. I did have Windows 7 64-bit prior to installing Ubuntu. I have backed up all the files on the hard drive, but if I could just access them straight off that would be super cool. Does anyone know how I can use the second hard drive? Thank you for your help EDIT: The following directories are currently in my /dev/ folder: ati/, block/, bsg/, bus/, char/, cpu/, isk/, input/, mapper/, net/, pktcdvd/, pts/, shm/, snd/, and usb/ EDIT: Result from sudo fdisk -l Disk /dev/sda: 60.0 GB, 60022480896 bytes 255 heads, 63 sectors/track, 7297 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d2dfd Device Boot Start End Blocks Id System /dev/sda1 * 1 6994 56174592 83 Linux /dev/sda2 6994 7298 2438145 5 Extended /dev/sda5 6994 7298 2438144 82 Linux swap / Solaris @djeykib So very close to fixing it.. unfortunately on the last command you gave it says this: $ sudo apt-get install linux-lts-backport-natty Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package linux-lts-backport-natty Checking on http://www.ubuntuupdates.org/ppas reveals that it is only available for 10.04. Looks like I'll have to unplug and re-plug hardware if I want it working still :(

  Read the article

• Is it possible to upload only files that have been updated into a server?

  - by kamikaze_pilot

  Hi guys, Suppose I have a server accessible via FTP and it hosts websites Suppose I want to edit the website locally so it wont affect the site live, and suppose I edit a whole bunch of files, and I don't want to deal with the hassle of keeping track of which files I've edited all the time... Once I finished editing I want to upload it to the server via FTP....is there some FTP software that automatically detects which files have been edited and have only those files uploaded and overwritten rather than having me manually choosing the files I've edited (and hence having to keep track of edited files) or have me upload the entire site which is a waste of time thanks in advance

  Read the article

• Ubuntu hardware wireless switch has no effect after suspend and 13.10 upgrade

  - by blaineh

  I'm posting this on SU after it stalled on askubuntu. I hope someone here can help! If you'd prefer to answer on AU itself, here's the link: http://askubuntu.com/questions/365177/hardware-wireless-switch-has-no-effect-after-suspend-and-13-10-upgrade Wireless works fine after a reboot, but after a suspend the hardware switch (for my laptop this is f12) has no effect on the wireless, it is just permanently off, and shows that it is with a red LED. My rfkill list all reads: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes Any combination with rfkill <un>block wifi doesn't work, although one time first blocking then unblocking actually turned it on again. sudo lshw -C network reads: *-network DISABLED description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 78:e4:00:65:2e:3f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.11.0-12-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:90100000-9010ffff *-network DISABLED description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 02 serial: c8:0a:a9:89:b4:30 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:2000(size=256) memory:90010000-90010fff memory:90000000-9000ffff memory:90020000-9002ffff Also, adding a /etc/pm/sleep.d/brcm.sh file as recommended here simply prevents the laptop from suspending at all, which of course is no good. This question has an answer urging to install the original driver, but it wasn't an "accepted answer" so I'd rather not take a chance on it. Also I'll admit I'm a bit lost on that and would like help doing so with the specific information I've given. I would be happy to provide more information, so long as you're willing to help me find it for you! This is a very annoying bug. I have a Compaq Presario CQ62. Edit. Output of lspci | grep Network: 02:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01) Edit. This morning, I had had the laptop suspended all night, and then when I tried to awake it, it simply wouldn't. It would try, and then it would sleep again (I guess it felt a little bit like me! </badjoke>). Is it possible these problems are related? Edit. I don't have enough reputation on SU proper to post links to pastebins and other questions I've tried, so I'm putting them in comments, and of course they're available in the original question.

  Read the article

• Outlook.com Sweep rule vs Filter rule

  - by Mahesha999

  New outlook.com introduced new sweep option. With it, you can create a filter to move messages from particular sender to a particular folder after certain days the mail comes. This rules gets added to the Filter list. However we cannot edit this rule by clicking Edit in front of it in that list. The dialog appears saying you should delete the rule and create the new one. I don't understand why sweep rules are considered differently from Filter rules? I have 68 filter rules. What if I want to add such time clause to these filter rules so that instead of moving the incoming mails immediately to a certain folder, they will be kept in Inbox for say 10 days and then they will be moved. Such time clause cannot be added to the filter rules. So should I delete all these 68 filters and create new Sweep rules?

  Read the article

• Ethernet 802.1x client -> WiFi AP on a Raspberry Pi?

  - by Martin Janiczek

  I have an Ethernet connection that requires 802.1x authentication (TTLS, MSCHAPv2, name+password). My goal is to connect that to something that would then act as an WiFi AP, so I can use the connection on more devices (iPhone, notebook, etc.) Would it be possible/good idea to use Raspberry Pi for this purpose? Or are there better-suited devices to do this? EDIT: found some alternatives but because of low rep can't post more than two links... OpenWRT + wpa_supplicant guide Carambola - works with OpenWRT (but probably not standalone?) Hornet-UB - works with OpenWRT Asus RT-N10+ + OpenWRT how-to EDIT 2: probably going to try TP-LINK TL-WR740N. It's a classic router, but can be flashed with OpenWRT, and the price beats everything else I've seen.

  Read the article

• free Raw-File Converter/Editor

  - by RCIX

  I have RAW files output by a program with a specific set of properties (Photoshop RAW, 16 bits, IBM PC byte order, no header, 1 non-interleaved channel, variable sizes like 257X257 or 129X513); does anyone know of a free tool that will allow me to convert to and from this format, and possibly do basic editing (selection, copy/paste, rotation of selection)? I've tried Picasa, XNView, and Paint Shop Pro 7 and none of them work properly. The closest i get is Paint Shop Pro which will at least make a serviceable attempt to open these files but i can't set all of the proper settings. XNView just might be able to edit it if i can figure out how to change the open settings for a particular raw file. So my questions at current are: how do i tell XNView to open a raw file a particular way? Failing that, is there any free tool that can open Photoshop-RAW files with the above settings (that's not photoshop)? If it helps, i'm trying to import/export/edit hieghtmap data for maps for Supreme Commander.

  Read the article

• Monitor resolution messed up somehow

  - by Kelp

  I purchased the Westinghouse 22" LCD LCM-22w3 a few years ago, and now it's been acting up on me. I just booted into Windows 7(without changing any settings), and the default resolution is 1600x1024, and it allows me to select a refresh rate of up to 85 Hz(it didn't let me do that). I usually have my resolution set to 1680x1050 with a refresh rate of 60 Hz. Now, that resolution does not even appear in the list. Does anyone have any idea of what could be the problem and how to fix it? Edit: I am not sure if this will help, but when I go to change the screen resolution, the monitor is known as "Generic Non-PnP Monitor". It used to be referred to as "Generic PnP Monitor). I tried to disable Generic Non-PnP Monitor, but when I restart, it uses that monitor again. Edit 2: I created a custom .inf file using Powerstrip, but that does not work either. The monitor settings are being stubborn.

  Read the article

• Network configuration problem

  - by Musti

  in my dorm I have to change network configuration and then if it is successfull, I have to enter a user name and password for wired internet connection. Anyway, I had many attempts but I couldnt achieve, and please look at my steps and tell me if there is something wrong and at the end there is an error, but I really dont have any idea about this error. (I am a new ubuntu user, and network is far away of my interests) 1) /etc/network/interfaces auto eth0 iface eth0 inet static address 172.030.014.038 netmask 255.255.255.252 network 192.168.2.0 broadcast 192.168.2.255 gateway 172.030.014.038 2) sudo gedit /etc/resolv.conf nameserver 010.050.001.001 nameserver 010.050.001.002 3) /etc/init.d/networking stop Deconfiguring network interfaces... [ OK ] 4) /etc/init.d/networking restart Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces Reconfiguring network interfaces... 172.030.014.038: Unknown host ifconfig: `--help' gives usage information. Failed to bring up eth0 Note: IP-address, netmask, gateway, Preferred DNS server and Alternate DNS server ara given by the management of Dorm. It wad very easy in windows but I couldnt achieve in Ubuntu. I also tried to edit from "edit connections" but the save button is gray and I cannot save it. Thanks in advance. / Musti

  Read the article

• xmodmap modifications aren't enough - anything else I can do?

  - by Codemonkey

  I'm using an Apple keyboard which has some annoyances compared to other keyboards. Namely, the Alt_L and Super_L keys are swapped, and the bar and less keys are swapped ("|" and "<"). I've written an Xmodmap file to swap the keys back: keycode 49 = less greater less greater onehalf threequarters keycode 64 = Super_L NoSymbol Super_L keycode 94 = bar section bar section brokenbar paragraph keycode 108 = Super_R NoSymbol Super_R keycode 133 = Alt_L Meta_L Alt_L Meta_L keycode 134 = Alt_R Meta_R Alt_R Meta_R I did this by identifying the keys using xev and the default modmap xmodmap -pke and swapping the keycodes. xev now identifies all my keys as correct, which is awesome! I can also use the correct keys to type the bar and less than symbols. (I followed this answer on askubuntu: How do I remap certain keys?) But it seems the change isn't very deep. For instance, the Super key is now broken in the Compiz Settings Manager. No shortcuts involving the Super key works (but the Alt key does). Also the settings dialog for Gnome Do doesn't heed the changes in xmodmap, and I can't open the Gnome Do window anymore if I use any of the remapped keys. So to summarize, everything broke. I would like a deeper way of telling Ubuntu (or any other Linux distro for that matter) which keys are which on the keyboard. Is there a way to edit the Keyboard Layout directly? I'm using the Norwegian Bokmål keyboard layout. Does it reside in a file somewhere I could edit? Any comments, previous experiences or relevant stray thoughts would be greatly appreciated - Thanks

  Read the article

• One user sometimes gets an unknown certificate error opening Outlook

  - by Chris

  Let me clarify a little. This isn't an unknown certificate error it's an unknown certificate error in so much as I can't figure out where the certificate comes from. This happens on a Win 7 Enterprise machine connecting to Exchange 2010 with Outlook 2010. The error he gets is that the root is not trusted because it's a self-signed cert. Take a look at this screenshot because even if I had generated this myself I wouldn't have put "SomeOrganizationalUnit" or "SomeCity" or "SomeState", etc. (Red block covers our domain name.) I'm a little concerned this is a symptom of a security breach. Exchange 2010 has three certificates installed but none of them are this certificate. They all have different expiration dates (one is expired) and different meta-data. edit: There are two scenarios that I see the certificate warning and one of them I can reliably repeat. When the user leaves his computer on over night Outlook pops the Security Warning window. I don't know what time this happens. Using Outlook Anywhere if I connect to Exchange externally via a cellular USB modem the Security Warning window will appear every time I close and reopen Outlook. Whether I say Yes or No does not make a difference on whether or not I can connect to Exchange and send/receive email. In other words, I can always connect to Exchange. I've checked my two Exchange servers and my Cisco router for a certificate that matches this one and I can't find it. edit 2: Here is a screenshot of the Security Alert window. (I've been calling it Security Warning... My mistake.) edit 3: I stopped seeing this error several weeks ago but I can't tie it to any single event (because I just sort of realized that warning had stopped showing up) but I think I found the source of the certificate. Last week I found out that the certificate on our website DomainA.com was invalid. I knew that our web admin had installed a valid certificate so when I look into the problem I found out I was being presented with the invalid certificate that this posting is in regards to. The Exchange server's domain is mail.DomainA.com so I can only guess that Outlook was passing this invalid certificate through as it did some kind of check on DomainA.com. This issue is still a mystery because the certificate warning stopped appearing several weeks ago whereas the invalid certificate issue on the website was only fixed last week. It ended up being a problem with the website control panel. The valid certificate was installed but not being served for some reason and instead the self-signed cert was being served.

  Read the article

• Ubuntu 12.04 Network Manager: unable to save manual setting to set up a static ip

  - by Andy

  I am fairly familiar with setting up servers, and ubuntu is generally my flavor of choice, but I just installed 12.04 desktop and I am seeing some behavior in network manager that is really puzzling. The network connection works fine if I leave it set on dhcp, but I would like a static IP address for my new web server. When I go into network manager and edit the connection for the one and only NIC I can select MANUAL from the dropdown menu but as soon as I do the Save button becomes greyed out. Even after filling out all fields for the connection it is still grey and I am unable to save the static IP connection information. Any thoughts would be greatly appreciated. I'm hoping there is just some new setting that I am unaware of.... On another note, if I stop the network manager and go edit the interfaces file (and the appropriate hosts/routes/dns files), I do get a static ip address assigned and I can contact my server from the outside, however, the server cannot find the internet. Can't ping even its own ip... I can ping the loopback interface though. I'm really confused on this one. Hoping someone can offer some help.

  Read the article

• Strategies for managing use of types in Python

  - by dave

  I'm a long time programmer in C# but have been coding in Python for the past year. One of the big hurdles for me was the lack of type definitions for variables and parameters. Whereas I totally get the idea of duck typing, I do find it frustrating that I can't tell the type of a variable just by looking at it. This is an issue when you look at someone else's code where they've used ambiguous names for method parameters (see edit below). In a few cases, I've added asserts to ensure parameters comply with an expected type but this goes against the whole duck typing thing. On some methods, I'll document the expected type of parameters (eg: list of user objects), but even this seems to go against the idea of just using an object and let the runtime deal with exceptions. What strategies do you use to avoid typing problems in Python? Edit: Example of the parameter naming issues: If our code base we have a task object (ORM object) and a task_obj object (higher level object that embeds a task). Needless to say, many methods accept a parameter named 'task'. The method might expect a task or a task_obj or some other construct such as a dictionary of task properties - it is not clear. It is them up to be to look at how that parameter is used in order to work out what the method expects.

  Read the article

• Illustrator "Save for Web & Devices" returning crappy, pixelated images

  - by Tory Waterman

  I'm trying to create a nice title for my webpage... a big white title to sit on a black background. I'm using Illustrator to do so. When I create it, it looks nice, but when I hit "save for web & devices", it comes out looking like a pixelated piece of crap on the site. Is there some setting I need to change to make Illustrator save a higher resolution image? Thanks EDIT I understand, from looking at some other posts, that this may be a result of "posterization" or "dither", but this is only a plain white image so I don't how this results in a colors problem. (I could be completely misinterpreting these terms) EDIT Figured version might be important... I'm using CS5.1

  Read the article

• Error in New-MailboxExportRequest - "Couldn't find the Enterprise Organizational Container" even though permissions seem right

  - by tacos_tacos_tacos

  When disabling users I typically will be asked to retain a copy of their mailbox. I accomplish this by literally creating their mailbox in Outlook and then exporting to PST. Is there some way around having to do this just to save a mailbox? Edit: I've tried New-MailboxExportRequest but I keep getting the following after providing an alias: Supply values for the following parameters: FilePath: \\localhost\EXPORT_PST\myuser.pst Mailbox: myuser Couldn't find the Enterprise Organization container. <--- the error I've also tried supplying [email protected] as the mailbox as well. Edit 2: I had already seen the post at http://www.mikepfeiffer.net/2010/10/error-couldnt-find-the-enterprise-organization-container-when-creating-a-new-mailbox-export-request/ so I set the permissions as follows below: NTFS permissions Sharing permissions I am still getting that error. Final Solution In Exchange SP2, it does not warn you that you have not set role assignments, it just fails. So be sure to create a management role for "Mailbox Import Export" and add your user to the group, then restart PowerShell for this to take effect.

  Read the article

• df command show no output

  - by user119720

  I'm running the linux distro on my server.When i want to verify the size of the disk, i'm issuing this commnand to get the output. df -h But it does not produce ANY output.Strangely enough when i'm issuing other command such as fdisk -l or du -h it can show output normally. Does anyone now why is this happening?Thanks. edit: here is the output of cat /etc/fstab none /dev/pts devpts rw 0 0 and this is for mount command none on /dev/pts type devpts (rw) none on /proc/sys/fs/binfmt_misc tpe binfmt_misc (rw) edit(2): here is the output of cat /proc/mounts /dev/vzfs / vzfs rw,relatime,usrquota,grpquota 0 0 proc /proc proc rw,relatime 0 0 sysfs /sys sysfs rw,relatime 0 0 none /dev/tmpfs rw,relatime 0 0 none /dev/pts devpts rw,relatime 0 0 none /proc/sys/fs/binfmt_misc binfmt_msc rw,relatime 0 0

  Read the article

< Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >