Search Results

Search found 20418 results on 817 pages for 'social network'.

Page 108/817 | < Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >

  • Accessing guests on virtual network when connected to host via PPTP

    - by Viktor Elofsson
    I'm setting up a development machine which runs Ubuntu 12.04 and KVM for virtualization. I have a guest running Ubuntu 12.04 which can be accessed from the host via its IP address which is assigned by libvirt. The guest can also access the internet, no problem there. However, now I want to setup PPTP so I can connect to the host (from my workstation running Windows 7) and directly access guests without relying on SSH port forwarding. I can connect from my W7-machine to the host (PPTP), but I cannot access any virtual machines (which are accessable from the host directly). Relevant configuration files cat /etc/network/interfaces auto lo iface lo inet loopback # device: eth0 auto eth0 iface eth0 inet static address x.x.x.x broadcast x.x.x.x netmask x.x.x.x gateway x.x.x.x # default route to access subnet up route add -net x.x.x.x netmask x.x.x.x gw x.x.x.x eth0 virsh net-edit default <network> <name>default</name> <uuid>xxxxxxxx-72ce-3c20-af0f-d3a010f1bef0</uuid> <forward mode='nat'/> <bridge name='virbr0' stp='on' delay='0' /> <mac address='52:54:00:xx:xx:xx'/> <ip address='192.168.122.1' netmask='255.255.255.0'> <dhcp> <range start='192.168.122.2' end='192.168.122.254' /> <host mac='52:54:00:yy:yy:yy' name='web1' ip='192.168.122.11' /> </dhcp> </ip> </network> cat /etc/pptpd.conf (commented lines removed) # TAG: option # Specifies the location of the PPP options file. # By default PPP looks in '/etc/ppp/options' # option /etc/ppp/pptpd-options # TAG: logwtmp # Use wtmp(5) to record client connections and disconnections. # logwtmp #(Recommended) localip 192.168.122.1 remoteip 192.168.122.234-238,192.168.122.245 cat /etc/ppp/chap-secrets* # Secrets for authentication using CHAP # client server secret IP addresses xxxxx * yyyyyyyyyy 192.168.122.100 I get the correct IP address when connecting my W7-machine, but when I try to ping the virtual machine at 192.168.122.11 I get Reply from 192.168.122.1: Destination port unreachable. It's probably something trivial I'm missing but I can't for the life of me figure out what it is. So I'm turning to you, serverfault.

    Read the article

  • Network keeps disconnecting - Repairing solves it. Router configuration

    - by Joao Carlos
    My network connection keeps going insane, it will keep normal applications connected, like TeamViewer and MSN, but webpages will stop loading (Problem loading page). Everything looks connected and works like a charm, but webpages and new connections wont work. If I press "Repair" in the network connections to restart the adapter, it will work. This happens on WIRED and WIRELESS connections, both on Windows and on MacOSx. I have had this for years (different computers, routers, cities), but I never figured it out. I learn to live with it, but, I think theres probably a solution. What must I be doing wrong if this keeps happening? You guys have same thing?

    Read the article

  • Can a virtual mikrotik box bridge a hyper-v internal network with a hyper-v external network?

    - by mcfrosty
    I am trying to set up a Mikrotik router as a transparent firewall on my network. I got the machine working on a hardware MT box, but my boss wants the MT virtualized. I have been trying the set up where my virtual windows box talks to the Mikrotik via private or internal network on the Hyper-V host. I can get the two machines to talk, but as soon as I set up a bridge on the MT, all traffic ceases between the two. Is it possible to create a bridge for this purpose (having the MT silently in front of my firewalled server)? I could really use some help.

    Read the article

  • vCenter Server: This host currently has no management network redundancy

    - by goober
    Background I'm on a new VMWare install consisting of: 1 vCenter Server (containing inventory service, SSO, vCenter server, and web client server) 2 ESX Servers configured in a HA group Problem When a I view the summary for any one of my servers, I receive a notice: "" This is expected in our scenario and we're okay with it. Attempted Solutions As I understand from this article and this discussion, the proper way to remove the error message is to ignore it via setting the "das.ignoreRedundantNetWarning" propery to "true". I took the following steps: Logged into vCenter Right-clicked on my HA cluster and chose "Edit Settings..." Clicked "vSphere HA" section Clicked "Advanced Options..." Added the "das.ignoreRedundantNetWarning" option with a value of "true". Question How do I get this error to go away, and are there any reasons why adding this option may not have worked? References Network redundancy message when configuring VMware High Availability in vCenter Server [VMWare KnowledgeBase] How remove a notice " has no management network redundant" [VMWare Community]

    Read the article

  • Amusing or Sad? Network Solutions

    - by dbasnett
    When I got sick my email ended up in every drug sellers email list. Some days I get over 200 emails selling everything from Viagra to Xanax. Either they don't know what my condition is or they are telling me you are a goner, might as well chill-ax and have a good time. In order to cut down on the mail being downloaded I thought I would add all of the Junk email senders from Outlook to my Network Solution mail server. Much to my amazement I could not find that import Spammers button, so I submitted a tech support request. Here is the response: Thank you for contacting Network Solutions Customer Service Department. We are committed to creating the best Customer experience possible. One of the first ways we can demonstrate our commitment to this goal is to quickly and efficiently handle your recent request. We apologize for any inconvenience this might have caused you. With regard to your concern, please be advised that we cannot import blocked senders in to you e-mail servers. An alternative option is for you to create a Custom Filter that filters unwanted e-mails. To create a Custom Filter: Open a Web browser (e.g., Netscape, Microsoft Internet Explorer, etc.). Type mail.[domain name].[ext] in the address line. Login to your Network Solutions email account. Click on the Configuration left menu tab. Click on the Custom Filter link. Type the rule name. blah, blah, blah Basically add them one at a time. "We are committed to creating the best Customer experience possible." No you are not. You are trying to squeeze every nickle you can out of me. "With regard to your concern, please be advised that we cannot import blocked senders in to you e-mail servers." Maybe I should apply for a job to write those ten complicated lines of code... Maybe I should question my choice of vendors, because if they truly "cannot" then they are to stupid to have my business. It is both amusing and sad. I'll be posting this in every forum I am a member of.

    Read the article

  • Windows 7 offline files - work temporarily offline even if network connection works

    - by Robert
    Sometimes I am connected via VPN to a network containing the server where files are stored which are cached by Windows offline files feature. Sometimes the connection works good and working this way is not a problem - on other times working is quite a pain because of high latency when working with the files in the Windows explorer. Is there an interactive way how a user (with admin permissions) can temporary suspend online usage of offline files? I already activated the "Transparent caching" group policy feature (Computer Configuration Policies Administrative Templates Networks Offline Files) with a network latency of 200msec but from my experience even if I get ping times to the file server of less than 40msec online usage is quite tenacious. Setting low latency times at this point causes the offline files often to toggle which makes problems with some applications working with several files and requires them to be consistent (like SVN client).

    Read the article

  • How to install network drivers during installation?

    - by Matt
    I have a server that I'm attempting to install windows onto. However, the disk is an iscsi target provided by ipxe. Everything appears to go well until about 3/4 through the install process I get an error about a critical driver missing and the installation is cancelled. I would say the critical driver would be the network card. It's an intel nic and the drivers are not on the windows installation CD. I tried slipstreaming them with RTSevenLite, but after it created the CD it seems it failed to make it bootable. I've also not been successful in making a bootable USB thumb drive or USB HDD. I suspect a buggy bios even though I have the latest. How to install network drivers during installation? Windows used to provide an optional F6 during install feature but this seems to be missing in Windows Servert 2008. Perhaps there is a way to do this, or another method?

    Read the article

  • Cannot find the "Create Network" menuitem in the WiFi icon menu in Mountain Lion

    - by Chuancong
    I am using Mountain Lion Developer Preview 2. I cannot find the "Create Network" menuitem in the WiFi icon menu in the menubar. It was there before when I was using Lion. It started missing since I upgraded to Mountain Lion Developer Preview 1. By the way, is there any other method to create an ad-hoc WiFi network on OS X? I tried to use Internet Sharing via WiFi, but other devices using the shared connection could not find the Mac in their local networks. I am using an early 2011 MacBook Pro 15'. Thanks.

    Read the article

  • Wireless network unavailable, no networks found after Windows update

    - by jacobsee
    Old Dell Inspiron 8200 laptop with Linksys Wireless G network adapter card (WPC54G v2). Wireless connection was working fine. Then I ran a bunch of windows updates, I think the last one was the recent .NET 3.5 service pack update. Now wireless networks won't connect. Using windows to manage wireless, no networks show up. I'm typing right now on another laptop where wireless is working fine. I've restarted router & Dell laptop several times. Tried to Repair wireless connection and refresh network list. Also restarted DHCP and WZC service, all to no avail. I then uninstalled .NET 3.5 SP (don't remember number) and .NET 3.0 SP2. I don't remember all the windows updates that I just ran because I haven't used this laptop in a while so had to catch up on some updates.

    Read the article

  • One Mac computer with multiple network connections?

    - by Kyle Lowry
    I have a Mac (OS X 10.5) that I would like to connect to a dedicated/isolated Internet connection (one that is not connected to the LAN), and a LAN. The LAN is set up with its own, separate, Internet connection which is shared by several dozen computers (and is quite slow). I want to set it up so that the Mac uses its own dedicated Internet connection (on a different account with a different company) for its Internet access, but can still access the local area network as well. How can I configure the Mac & the network to allow this?

    Read the article

  • Connecting a Mac to the office network

    - by user36501
    Hi All, I am busy preparing to start working with a Mac at work - in addition to my old PC. Just wondered, is it difficult to setup the Mac to run on the office network - i.e. does it need any special settings or servers or anything like that? and also printers...can I use the network printer as normal. I am just pottrying to think ahead of any ential issues. Also share drives...will I be able to access share drives and my backups to these shares drives - all a bit daunting! Btw in case you didn't notice I am a Mac Nube lol

    Read the article

  • Connect devices plugged into Raspberry Pi ethernet to WiFi network

    - by Tom
    I'm just starting out on a mission to learn more about networking and I've followed a tutorial (http://raspberrypihq.com/how-to-turn-a-raspberry-pi-into-a-wifi-router/) to turn my Raspberry Pi into a wifi router. That worked really well so I modified it slightly so that I can use a tethered iphone for the internet connection - I just switched all "eth0" references to "eth1" (the iphone interface) and added a script to set everything up when the phone is plugged in. This setup has freed up the Pi's ethernet port so I'd like to try and take this a step further and allow devices plugged into it to connect to the network. If possible, I'd like to try adding a switch so I can connect multiple devices. I've tried fiddling around with nat & iptables with no luck so my question is, how can I connect devices on eth0 to my wlan network?

    Read the article

  • sar command to generate only CPU utilization and network statistics in Linux

    - by Vijay Shankar Kalyanaraman
    I want to be able to generate the system activity report every 30 seconds or every minute and store in a file and use it for diagnostic purposes on my VM. So I give an output file for the sar command and read it using the "-f" option. But I only use the CPU utilization and network utilization part of the report and so rest is all that I don't want to save (waste the space in the disk to store these reports). Also the sar files that are generated are all binary. Is there a way to collect these stats for the CPU and network utilization alone? and so save almost 2/3rds the space on the disk?

    Read the article

  • Windows host MIA on network

    - by andrewbadera
    I've had a machine effectively disappear off my home office network. 192.168.1.100 - Windows 7 laptop (on domain) - problem machine 192.168.1.42 - Windows 2008 server (domain controller) 192.168.1.101 - Windows 7 laptop (guest; not on domain) For some reason I am unable to ping, tracert or remote desktop to 192.168.1.100 from .42 or .101. I can remote between .42 and .101 no problem however. .100 cannot ping nor remote desktop to .42 or .101. Remote Desktop access is enabled on .100. I've opened the firewall rules. I've disabled the firewall domain profile. I've turned the firewall service off entirely. No matter what I do, the .100 host is unreachable by any other host on the network. I'm at my wit's end. Thanks in advance for any debug advice!

    Read the article

  • I'm looking for a monitor tool to test Jitter, ICMP, Traceroute and other network issues

    - by Elad Dotan
    I'm looking for a monitor tool to test Jitter, ICMP, Traceroute and other network issues. it could be an application I run from my company Network in NY and London or a SAAS service that have a service that can do it for me. I have a problem in my Data Center that I would like to fix. it happens in different times of the day. I want to run the monitor for few days and save the results so we can analyze them. any idea? Thanks!! Elad.

    Read the article

  • Wireless Network Connection gets dropped at times under Windows 7

    - by n179911
    I have running Windows 7 on my hp laptop with 802.11n wifi adapter. Some times, I lost wireless internet connection. Under the 'Wireless Connection' when I click the notification area, it said 'my home network is 'connected'... But in the header 'currently Connected to' it said 'no internet access' instead of 'internet access' I can 'fix' my problem by going to the 'wireless connection' my home network, click 'disconnect' and then click 'connect'. And when it comes back up, it gets connected again. any idea how can i fix this problem? Thank you.

    Read the article

  • design a large scale network for an organization

    - by Essam
    i want to design a large scale network for an organization with HQ and two branches. i want to use a class A subnet. if i am using the network address 30.0.0.0 for the whole organization how can it be different from another organization company or whatever which is using the same address in another country? now i have the three locations for this organization,so i need 5 subnets [one for the HQ,two for branch A and branch B , one for connecting A to HQ and one for connecting branch B with HQ since i will use central DHCP server at the HQ,is that (number of subnetting) right? is it advisable to use class A or class B for this organization it term of address that will be wasted (let's say it is a university with two branches in two different states)?!

    Read the article

  • Windows - how to clone network connections entry to another machine

    - by tomash
    Let's assume we have two Windows XP computers with identical hardware configuration, including GPRS modem connected to COM1 serial port. On the first PC we add new modem device, set up gprs connection on this port in "Network connections" folder. How avoid clicking the same procedure on second computer? Detailed questions: Where are the entries from "Network connections" stored? File, registry? Is there a possibility to clone such entry between PCs? Question as above but regarding modem entry in device manager - can it be exported from one pc and imported on second?

    Read the article

  • Network access to VM only from host ...

    - by Jamie
    I'm trying to do some testing of Ubuntu 10.04 Beta 2 Server in a VMWare environment. The host is XP, and the VM software is VMPlayer. Problem is, I want to be able to see the VM from the network, not just from the host. I can SSH into the VM from the host, but from any other machine on the network I can't even get the VM to respond to a ping. Going the other way (from the VM out) isn't a problem at all. The VM software did an 'easy installer' so I'm not really sure what was going on with the networking. Suggestions?

    Read the article

  • Deployment of broadband network

    - by sthustfo
    Hi all, My query is related to broadband network deployment. I have a DSL modem connection provided by my operator. Now the DSL modem has a built-in NAT and DHCP server, hence it allocates IP addresses to any client devices (laptops, PC, mobile) that connect to it. However, the DSL modem also gets a public IP address X that is provisioned by the operator. My question is Whether this IP address X provisioned by operator is an IP address that is directly on the public Internet? Is it likely (practical scenario) that my broadband operator will put in one more NAT+DHCP server and provide IP addresses to all the modems within his broadband network. In this case, the IP addresses allotted to the modem devices will not be directly on the public Internet. Thanks in advance.

    Read the article

  • Accessing the physical IP address of a computer on my network that is no longer available

    - by floebs
    I'm trying to find out how to access the IP address of a computer (macbook pro) that I once had on my network at home. Does terminal store the 'connected' or 'linked' computer ID or IP of a networked computer anywhere that I can access after the laptop is no-longer within range? The laptop was part of my airport extreme network, its now out of range (stolen!), and I would like to know if its possible to discover the physical address of that laptop, even though I no-longer have physical access to the laptop. I have my airport extreme configured (somewhere??) to sniff out that laptop if it comes within range, and then connect to it. Where would this 'configured info' be stored on my desktop?

    Read the article

  • Automatic layout of manual network mapping

    - by Paul
    So I have a small business network mainly consisting of two routed layer-2 domains with a total of ca. 100 devices spread over ca. 2000m² production and office spaces. Typical problems to solve using the graph would be: Over what (cable) path is a PC connected to the server? Where to expect devices connected to a switch port? I want to generate a graph of the physical network topology: Nodes are endpoint devices, switch ports, wall outlets, patch panel ports etc. Edges are cable connections. Ideally, grouping edges (or segments) that pass through the same bundle could be grouped. Also I would like to augment the graph data with automatically gathered data (monitoring state, MAC address, Switch port <- MAC entries to build up parts of the map). At the moment I use graphviz for this inside a Confluence wiki like that: layout = "neato" overlap = scale subgraph { rankdir = "TB" subgraph cluster_r1pf1 { r1pf1 [label="{ Rack 1 PF 1 | { <p1>P1 | <p2>P2 | <p3>P3} }", shape=record] } subgraph cluster_switch1 { switch1 [label="{ Rack 1 Switch 1 | { <p1> P1 | <p1> P1 | <p3> P3} }", shape=record] } r1pf1:p1 -> switch1:p1 (obviously there are dozens of entries omitted here) Problem is: I have a hard time to influence graphviz to generate a bearable layout. Edges overlap so bad that you can't read the diagram anymore. The question is: What other tools (be it interactive like Visio, Omnigraffle or I/O-oriented like graphviz) exist that would allow an easily versionable (as in: Operates on a text file) documentation that is both machine and human readable and editable? Why not OmniGraffle or Visio? Well we don't have Macs and Visio is not available at the moment. To buy it I would need good arguments. Automation would be one of that. But last time I looked, versioning Visio files or even thinking about automatic handling was a nightmare. Related: Network Mapping Tools basically asks the same with a focus on generating the complete graph automatically (but without the need to document cabling connections) Recommendations for automatic computer inventory brings up links of "all-in-one" solutions

    Read the article

  • Windows service running under network credentials doesn't autostart

    - by David Alpert
    I have a Subversion Server running as a resident service on a Windows XP Pro machine. That service needs to access a secure network fileshare, so I used the Services-Properties-Log On tab to tell the service to run as a user who has access to the target fileshare. That works out fine until the machine restarts, when the service fails to autostart. I am able to start it manually by logging in, going back to that Services-Properties-Log On tab and reconfiming the explicit credentials. Do I have to manually start this service under alternate credentials every time the machine reboots? Is there something else I can do to make sure that my Subversion server service autostarts with proper access to authenticate against this network share?

    Read the article

  • non-GUI connection to local Hyper-V VM without network

    - by sandro
    I have a virtual machine on Hyper-V manager (Windows 2008 R2) without a network configured on the VM. From a powershell script running on the host Windows server, I would like to query into the OS of that local VM for certain information (i.e. if a given process has finished completion). I am using codeplex's pshyperv module (https://pshyperv.codeplex.com/) to interact with Hyper-V manager, but the only cmdlet to connect to the vm is 'New-VMConnectSession', which launches a 'vmconnect.exe' connection to the VM. Since vmconnect.exe is essentially RDP, this is not very script-friendly. From within a host's powershell script, is there any way to send a command to a local virtual machine's OS and receive output, if no network is configured on the VM? (I believe Vmware's 'vmrun' utility has this capability) Another way to ask this question: Does Hyper-V have a non-GUI-based form of vmconnect.exe? (PS. Not sure if this was more stackoverflow or serverfault)

    Read the article

< Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >