Search Results

Search found 61097 results on 2444 pages for 'windows 8 upgrade'.

Page 108/2444 | < Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >

  • Fix invalid objects and components - BEFORE you upgrade!

    - by Mike Dietrich
    We are currently running a Tech Challange Workshop with 25 Oracle consultants and support folks from all over EMEA. We call it Tech Challange because we seperate these experts having between 5 and 20 years of Oracle experience into 5 groups - and each group has to complete their special challange such as moving a database from 10.2 to Exadata V2 or upgrading from single instance 10.2 to Real Application Clusters 11.2 with the new Grid Infrastructure. Actually we start this training with a bit presentation pieces about upgrades, Real Application Testing and Golden Gate. And one topic I always point out: Keep your database tidy before the upgrade!!! Clean up all invalid objects - especially in SYS and SYSTEM user schema BEFORE you upgrade. Use utlrp.sql to recompile invalid objects. Use Note:753041.1 to diagnose and fix invalid components. Do this always BEFORE you start the upgrade. Even if it may take some time. Otherwise your upgrade could fails or significant parts of the database packages could be invalid after the upgrade as well. I just came across this today as one group had ~240 invalid objects in the database - and due to the fact that the original system was still there could proof that the objects had been invalid before. Good job, BUT ... :-)

    Read the article

  • Error when upgrading initscripts using dist-upgrade on a cd image using uck

    - by InkBlend
    I was using UCK to customize an Ubuntu 11.10 image, and ran a dist-upgrade on it (from the console) to try to update all of the packages on it. The upgrade worked successfully for all but two packages, so I tried again and got the same error message. This is what happened: # sudo apt-get dist-upgrade Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 2 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y Setting up initscripts (2.88dsf-13.10ubuntu4.1) ... guest environment detected: Linking /run/shm to /dev/shm rmdir: failed to remove `/run/shm': Device or resource busy Can't symlink /run/shm to /dev/shm; please fix manually. dpkg: error processing initscripts (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of ifupdown: ifupdown depends on initscripts (>= 2.88dsf-13.3); however: Package initscripts is not configured yet. dpkg: error processing ifupdown (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already Errors were encountered while processing: initscripts ifupdown E: Sub-process /usr/bin/dpkg returned an error code (1) # How can I fix this? Is the problem with the ISO, dpkg, or can I just not upgrade some packages with UCK? I am using Ubuntu 11.10 to and UCK 2.4.5 to customize an Ubuntu 11.10 image.

    Read the article

  • Hot fix published for TFS2010 upgrade issues

    - by jehan
    Microsoft has released a hot fix for the issues that are identified after the migration of TFS2005/TFS2008 servers to TFS2010. The issues are related to Merging and Labels: ·         Labels that were created before the upgrade are entirely empty.  Labels could be also have incorrect contents. ·         The merge wizard in Visual Studio does not display all valid merge targets for a given source path/branch. ·         During merging, merge candidates are shown for changes that were already merged prior to the upgrade. If you have not yet upgraded to TFS 2010, the hotfix is now available and is highly recommended to be applied before configuring your team project collections. Because this hotfix applies to the upgrade of version control content, it must be applied after TFS 2010 setup is complete, but before configuration is started.  At the end of the setup experience, the Success screen is shown indicating the completion of the installation.  Normally, users will continue on to the configuration part, but in this case, the user need to cancel the configuration part by un-checking the “Launch Team Foundation Server Configuration Tool” box, which will enable the Cancel button. After exiting setup, the hotfix executable can be run to update the upgrade steps. Once the hotfix is installed, the TFS Configuration Wizard will need to be re-launched from the Start Menu to complete the upgrade process.    The hotfix has been published on MSDN Code Gallery – you can find it here: http://code.msdn.microsoft.com/KB2135068   If you have upgraded to TFS2010 and facing any of the above issues, then checkout this KB for Resolution: http://support.microsoft.com/kb/2193796/en-us

    Read the article

  • Disconnect have no effect using rdesktop

    - by Hongxu Chen
    So I'm using rdesktop with my labtop when I remote my PC in the lab,which is installed with Windows 7.Everything went well until I recently upgraded my lubuntu of the laptop(or maybe there's nothing with the upgrade at all,however I don't know).The rdesktop fails to disconnect when I disconnect from the start menu of Windows.This does not mean that I cannot return to my linux, actually I get back to lubuntu successfully and the terminal reports that I have disconnected.However when I re-login to Windows of the PC in the lab(via rdesktop) after I reboot my laptop, it fails.Then I come to the PC in the lab and the screen message tells me that it is still connected with my lubuntu. So what's the problem? Do any guys have similar experience? PC:Windows 7,in the lab;laptop:linux(lubuntu 12.04)

    Read the article

  • Win32 and Win64 programming in C sources?

    - by Nick Rosencrantz
    I'm learning OpenGL with C and that makes me include the windows.h file in my project. I'd like to look at some more specific windows functions and I wonder if you can cite some good sources for learning the basics of Win32 and Win64 programming in C (or C++). I use MS Visual C++ and I prefer to stick with C even though much of the Windows API seems to be C++. I'd like my program to be portable and using some platform-indepedent graphics library like OpenGL I could make my program portable with some slight changes for window management. Could you direct me with some pointers to books or www links where I can find more info? I've already studied the OpenGL red book and the C programming language, what I'm looking for is the platform-dependent stuff and how to handle that since I run both Linux and Windows where I find the development environment Visual Studio is pretty good but the debugger gdb is not available on windows so it's a trade off which environment i'll choose in the end - Linux with gcc or Windows with MSVC. Here is the program that draws a graphics primitive with some use of windows.h This program is also runnable on Linux without changing the code that actually draws the graphics primitive: #include <windows.h> #include <gl/gl.h> LRESULT CALLBACK WindowProc(HWND, UINT, WPARAM, LPARAM); void EnableOpenGL(HWND hwnd, HDC*, HGLRC*); void DisableOpenGL(HWND, HDC, HGLRC); int WINAPI WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPSTR lpCmdLine, int nCmdShow) { WNDCLASSEX wcex; HWND hwnd; HDC hDC; HGLRC hRC; MSG msg; BOOL bQuit = FALSE; float theta = 0.0f; /* register window class */ wcex.cbSize = sizeof(WNDCLASSEX); wcex.style = CS_OWNDC; wcex.lpfnWndProc = WindowProc; wcex.cbClsExtra = 0; wcex.cbWndExtra = 0; wcex.hInstance = hInstance; wcex.hIcon = LoadIcon(NULL, IDI_APPLICATION); wcex.hCursor = LoadCursor(NULL, IDC_ARROW); wcex.hbrBackground = (HBRUSH)GetStockObject(BLACK_BRUSH); wcex.lpszMenuName = NULL; wcex.lpszClassName = "GLSample"; wcex.hIconSm = LoadIcon(NULL, IDI_APPLICATION);; if (!RegisterClassEx(&wcex)) return 0; /* create main window */ hwnd = CreateWindowEx(0, "GLSample", "OpenGL Sample", WS_OVERLAPPEDWINDOW, CW_USEDEFAULT, CW_USEDEFAULT, 256, 256, NULL, NULL, hInstance, NULL); ShowWindow(hwnd, nCmdShow); /* enable OpenGL for the window */ EnableOpenGL(hwnd, &hDC, &hRC); /* program main loop */ while (!bQuit) { /* check for messages */ if (PeekMessage(&msg, NULL, 0, 0, PM_REMOVE)) { /* handle or dispatch messages */ if (msg.message == WM_QUIT) { bQuit = TRUE; } else { TranslateMessage(&msg); DispatchMessage(&msg); } } else { /* OpenGL animation code goes here */ glClearColor(0.0f, 0.0f, 0.0f, 0.0f); glClear(GL_COLOR_BUFFER_BIT); glPushMatrix(); glRotatef(theta, 0.0f, 0.0f, 1.0f); glBegin(GL_TRIANGLES); glColor3f(1.0f, 0.0f, 0.0f); glVertex2f(0.0f, 1.0f); glColor3f(0.0f, 1.0f, 0.0f); glVertex2f(0.87f, -0.5f); glColor3f(0.0f, 0.0f, 1.0f); glVertex2f(-0.87f, -0.5f); glEnd(); glPopMatrix(); SwapBuffers(hDC); theta += 1.0f; Sleep (1); } } /* shutdown OpenGL */ DisableOpenGL(hwnd, hDC, hRC); /* destroy the window explicitly */ DestroyWindow(hwnd); return msg.wParam; } LRESULT CALLBACK WindowProc(HWND hwnd, UINT uMsg, WPARAM wParam, LPARAM lParam) { switch (uMsg) { case WM_CLOSE: PostQuitMessage(0); break; case WM_DESTROY: return 0; case WM_KEYDOWN: { switch (wParam) { case VK_ESCAPE: PostQuitMessage(0); break; } } break; default: return DefWindowProc(hwnd, uMsg, wParam, lParam); } return 0; } void EnableOpenGL(HWND hwnd, HDC* hDC, HGLRC* hRC) { PIXELFORMATDESCRIPTOR pfd; int iFormat; /* get the device context (DC) */ *hDC = GetDC(hwnd); /* set the pixel format for the DC */ ZeroMemory(&pfd, sizeof(pfd)); pfd.nSize = sizeof(pfd); pfd.nVersion = 1; pfd.dwFlags = PFD_DRAW_TO_WINDOW | PFD_SUPPORT_OPENGL | PFD_DOUBLEBUFFER; pfd.iPixelType = PFD_TYPE_RGBA; pfd.cColorBits = 24; pfd.cDepthBits = 16; pfd.iLayerType = PFD_MAIN_PLANE; iFormat = ChoosePixelFormat(*hDC, &pfd); SetPixelFormat(*hDC, iFormat, &pfd); /* create and enable the render context (RC) */ *hRC = wglCreateContext(*hDC); wglMakeCurrent(*hDC, *hRC); } void DisableOpenGL (HWND hwnd, HDC hDC, HGLRC hRC) { wglMakeCurrent(NULL, NULL); wglDeleteContext(hRC); ReleaseDC(hwnd, hDC); }

    Read the article

  • Recent uploaded slides for the Upgrade Talks last week

    - by Mike Dietrich
    Welcome 2011 :-) And here you'll find the newest talks Carol, Roy and Brian delivered last week in several cities (please find the also in the DOWNLOAD SLIDES section on the right side of this blog): Upgrade Methods and Upgrade Planning: Click here to Download and use the keyword: roy2011 +500 Slides Upgrade Workshop Presentation: Click here to Download and use the keyword (Schlüsselwort): upgrade112 Hope you had a nice weekend and wonderful weather, too, as we had yesterday south of Munich. Click pic for a higher resolution: Starnberg Lake - View towards the Alps

    Read the article

  • How to move your Windows User Profile to another drive in Windows 8

    - by Mark
    I like to have my user folder on a different drive (D:) than my OS is (C:). Reading the following post I decided to give it a try. All went quite well, untill I found out that my Windows 8 Apps won't execute anymore (other than that I didn't noticed any problems). My apps do work, while using an account that isn't moved. In the eventviewer I've found error messages like these: App <Microsoft.MicrosoftSkyDrive> crashed with an unhandled Javascript exception. App details are as follows: Display Name:<SkyDrive>, AppUserModelId: <microsoft.microsoftskydrive_8wekyb3d8bbwe!Microsoft.MicrosoftSkyDrive> Package Identity:<microsoft.microsoftskydrive_16.4.4204.712_x64__8wekyb3d8bbwe> PID:<4452>. The details of the JavaScript exception are as follows Exception Name:<WinRT error>, Description:<Loading the state store failed. > , HTML Document Path:</modernskydrive/product/skydrive/App.html>, Source File Name:<ms-appx://microsoft.microsoftskydrive/jx/jx.js>, Source Line Number:<1>, Source Column Number:<27246>, and Stack Trace: ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:27246 localSettings() ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:51544 _initSettings() ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:54710 getApplicationStatus(boolean) ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:48180 init(object) ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:45583 Application(number, boolean) ms-appx://microsoft.microsoftskydrive/modernskydrive/product/skydrive/App.html:216:13 Anonymous function(object) Using ProcMon, I see a lot of access denied messages, like these: Date & Time: 12-9-2012 9:32:20 Event Class: File System Operation: CreateFile Result: ACCESS DENIED Path: D:\Users\John\AppData\Local\Packages\microsoft.microsoftskydrive_8wekyb3d8bbwe\Settings\settings.dat TID: 2520 Duration: 0.0000149 Desired Access: Read Data/List Directory, Write Data/Add File, Read Control Disposition: OpenIf Options: Sequential Access, Synchronous IO Non-Alert, No Compression Attributes: N ShareMode: None AllocationSize: 0 Any idea how to solve this? I noticed that the app folders e.g.: D:\Users\john\AppData\Local\Packages\microsoft.microsoftskydrive_8wekyb3d8bbwe had a different owner than the old profile folder had. Old profile folder had john as owner where my new profile folder had the Administrators group as owner. Changing this didn't help unfortunately.

    Read the article

  • Microsoft continuera à soutenir Windows Mobile 6.5 et le fera cohabiter avec Windows Phone 7, notamm

    Mise à jour du 25/03/10 Microsoft continuera à soutenir Windows Mobile 6.5 Malgré l'arrivée de Windows Phone 7, principalement pour rassurer les entreprises Microsoft avait sorti un SDK pour Windows Mobile 6.5 en janvier (lire ci-avant). Puis dans la foulée, en février, il avait annoncé l'arrivée de Windows Phone 7 (ex-Windows Mobile 7). Problème, ce futur OS ne permet pas d'écrire des applications rétro-compatibles. Face à ces signes contradictoires, la question commençait donc à se poser avec insistance : WinMob 6.5 allait-il être abandonné ? Cette question est d'autant plus cruciale pour Microsoft que ...

    Read the article

  • Oracle User Productivity Kit Best Practices for Upgrade Projects

    Minimize risk and increase success of your upgrade with Oracle User Productivity Kit. By providing value throughout the upgrade cycle, Oracle UPK can maximize your return on investment and quckly get your users up to speed on the new application. Learn how to use Oracle UPK for all phases of your upgrade project, including process review and design; application setup and configuration; testing, training and change management; and maintenance and support.

    Read the article

  • How to Upgrade PHP 5.2 to 5.3 on Windows Plesk Panel 8.2

    - by Jagat Sheth
    I need to upgrade my server PHP version becasue of Wordpress New version not support PHP 5.2. On My server windows 2003 stansard edition x64 with SP1 installed, IIS 6.0, MySQL 4.1, Plesk Panel 8.2. I have follow listed steps on plesk KB. http://kb.parallels.com/6670 How to update PHP 5 on a Windows server with Parallels Plesk Control Panel 8.x and 9.x installed. In order to upgrade PHP 5 to the necessary version (other than shipped with Parallels Plesk), please perform the following steps: Stop Plesk services (‘Control Panel’ and all that are included in the ‘Plesk Run-Time’ section) Rename folder %plesk_dir%\Additional\PleskPHP5 to the orig_PleskPHP5 Create a new folder %plesk_dir%\Additional\PleskPHP5 Download necessary version of PHP, unzip its content, and copy it to the newly created folder PleskPHP5 Copy the file php.ini from the old folder orig_PleskPHP5 to the new one Make sure the permissions are inherited Start Plesk services Click the "Refresh" button in the Components Management section in Parallels Plesk Panel and check if you can see the new PHP version there After follow steps when I open a PHP info it shows me specified module could not be found. If anybody know solution Kindly help me is highly priority. I am very thankful if any one help me to solve this ASAP. Thanks and regards, Jagat Sheth

    Read the article

  • Win7 Hangs During App Install/Upgrade/Uninstall

    - by JadeMason
    I have a custom built PC that intermittently hangs when installing, uninstalling, or upgrading applications. Technical Specs ASUS P5E w/ WiFi Motherboard Intel Core2 Quad Q6600 Processor 4x 2GB G.Skill DDR2 800 SDRAM ASUS EAH2900XT / Radeon HD 2900XT 512MB Video Card Under normal operation the machine runs reliably, even under heavy load, such as video transcoding. The temperature never gets anywhere near where I would worry about it. However, the machine regularly hangs (complete lockup, no response to keyboard or mouse, no activity on-screen) when either installing a new application, uninstalling an existing application, or applying patches to existing applications or the OS. This is extremely frustrating as this machine is primarily used as a HTPC. Several apps are configured for automatic updates, and these updates sometimes cause the machine to lockup while we are watching content on the PC. In previously investigating this issue, I found one likely problem could be my Logitech Webcam. The Logitech software has a bug that leaves an entry in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\ Control\SessionManager\PendingFileRenameOperations Which references the Temp directory. My registry contained this error, so I uninstalled the webcam software and deleted this registry key value. Unfortunately, the machine will still intermittently hang. I've noticed that the hangs always happen when an install/upgrade/uninstall requires elevated privileges (presumably to modify the registry). I can typically get at least one install/upgrade/uninstall to complete after a reboot, but after that it is a game of russian roulette to see if the operation will succeed or hang the machine. The event log is not helpful, as log messages end at the time of the hang, with no record of a warning or error. My only recourse when the machine hangs in this way is to perform a hard reset/power cycle. Any tips on how to further debug this issue are greatly appreciated.

    Read the article

  • Ubuntu 12.04 upgrade (from 11.10) removed all packages installed

    - by Jagmal
    I upgraded from Ubuntu 11.10 to 12.04 using bootable USB. After upgrade, all non-default packages from 11.10 are gone. For ex, I did not have Chromium, Eclipse etc. Although, I could see these in the History in the "Ubuntu Software Center". Is there any way I can retrieve all these packages (even reverting back to 11.10 is also fine with me)? What could be a possible reason for this (We plan to upgrade a few more machines)? During the upgrade process, I had unchecked the box which asked permission to look online for upgrade/packages. Co

    Read the article

  • trying to upgrade memory

    - by user214876
    I've been using Ubuntu on my laptop for awhile now. Not quite used to it yet. I've got a Acer Aspire with an orig 4 gig mem/500 gig HDD. Running 12.04 presently 32 bit sys. I have the 13.04 upgrade disc and want to upgrade my memory to 8 Gig. Everytime I install the 8 gig memory, the system won't boot to either version. I downloaded the 64 bit version of both versions of Ubuntu but no results yet. Can anyone offer a suggestion here? I'm kinda lost. Additional Information: The memory was purchased through Acer/Kingston. Recommended for this computer. I watched the video on installing it, so I doubt it's installed wrong. (There's only one way of putting it in). I swapped Op Sys, from Ubuntu 12.04 to 13.04 to 13.10 and now to Xubuntu 13.10 64 bit version. I'm still not having any luck with this upgrade. Would it be necessary to upgrade the CPU? It's just a thought, I don't know what else could keep me from utilizing the new memory. Additional Information: Called Kingston this afternoon, they are sending replacement lower density memory modules 2/4 gig - 8 gig. Tech service says I need to upgrade BIOS to utilize new memory install VIA Dos since it is no longer a windows system. I'm not sure how to go about that but it's a learning process I can live with. Thank you all for your help/support. I realize this isn't a Ubuntu problem but each new user of this op sys, seems to share simular problems and maybe someone can use this info to their advantage.

    Read the article

  • Process.Start() and ShellExecute() fails with URLs on Windows 8

    - by Rick Strahl
    Since I installed Windows 8 I've noticed that a number of my applications appear to have problems opening URLs. That is when I click on a link inside of a Windows application, either nothing happens or there's an error that occurs. It's happening both to my own applications and a host of Windows applications I'm running. At first I thought this was an issue with my default browser (Chrome) but after switching the default browser to a few others and experimenting a bit I noticed that the errors occur - oddly enough - only when I run an application as an Administrator. I also tried switching to FireFox and Opera as my default browser and saw exactly the same behavior. The scenario for this is a bit bizarre: Running on Windows 8 Call Process.Start() (or ShellExecute() in Win32 API) with a URL or an HTML file Run 'As Administrator' (works fine under non-elevated user account!) or with UAC off A browser other than Internet Explorer is set as your Default Web Browser Talk about a weird scenario: Something that doesn't work when you run as an Administrator which is supposed to have rights to everything on the system! Instead running under an Admin account - either elevated with a User Account Control prompt or even when running as a full Administrator fails. It appears that this problem does not occur for everyone, but when I looked for a solution to this, I saw quite a few posts in relation to this with no clear resolutions. I have three Windows 8 machines running here in the office and all three of them showed this behavior. Lest you think this is just a programmer's problem - this can affect any software running on your system that needs to run under administrative rights. Try it out Now, in order for this next example to fail, any browser but Internet Explorer has to be your default browser and even then it may not fail depending on how you installed your browser. To see if this is a problem create a small Console application and call Process.Start() with a URL in it:namespace Win8ShellBugConsole { class Program { static void Main(string[] args) { Console.WriteLine("Launching Url..."); Process.Start("http://microsoft.com"); Console.Write("Press any key to continue..."); Console.ReadKey(); Console.WriteLine("\r\n\r\nLaunching image..."); Process.Start(Path.GetFullPath(@"..\..\sailbig.jpg")); Console.Write("Press any key to continue..."); Console.ReadKey(); } } } Compile this code. Then execute the code from Explorer (not from Visual Studio because that may change the permissions). If you simply run the EXE and you're not running as an administrator, you'll see the Web page pop up in the browser as well as the image loading. Now run the same thing with Run As Administrator: Now when you run it you get a nice error when Process.Start() is fired: The same happens if you are running with User Account Control off altogether - ie. you are running as a full admin account. Now if you comment out the URL in the code above and just fire the image display - that works just fine in any user mode. As does opening any other local file type or even starting a new EXE locally (ie. Process.Start("c:\windows\notepad.exe"). All that works, EXCEPT for URLs. The code above uses Process.Start() in .NET but the same happens in Win32 Applications that use the ShellExecute API. In some of my older Fox apps ShellExecute returns an error code of 31 - which is No Shell Association found. What's the Deal? It turns out the problem has to do with the way browsers are registering themselves on Windows. Internet Explorer - being a built-in application in Windows 8 - apparently does this correctly, but other browsers possibly don't or at least didn't at the time I installed them. So even Chrome, which continually updates itself, has a recent version that apparently has this registration issue fixed, I was unable to simply set IE as my default browser then use Chrome to 'Set as Default Browser'. It still didn't work. Neither did using the Set Program Associations dialog which lets you assign what extensions are mapped to by a given application. Each application provides a set of extension/moniker mappings that it supports and this dialog lets you associate them on a system wide basis. This also did not work for Chrome or any of the other browsers at first. However, after repeated retries here eventually I did manage to get FireFox to work, but not any of the others. What Works? Reinstall the Browser In the end I decided on the hard core pull the plug solution: Totally uninstall and re-install Chrome in this case. And lo and behold, after reinstall everything was working fine. Now even removing the association for Chrome, switching to IE as the default browser and then back to Chrome works. But, even though the version of Chrome I was running before uninstalling and reinstalling is the same as I'm running now after the reinstall now it works. Of course I had to find out the hard way, before Richard commented with a note regarding what the issue is with Chrome at least: http://code.google.com/p/chromium/issues/detail?id=156400 As expected the issue is a registration issue - with keys not being registered at the machine level. Reading this I'm still not sure why this should be a problem - an elevated account still runs under the same user account (ie. I'm still rickstrahl even if I Run As Administrator), so why shouldn't an app be able to read my Current User registry hive? And also that doesn't quite explain why if I register the extensions using Run As Administrator in Chrome when using Set as Default Browser). But in the end it works… Not so fast It's now a couple of days later and still there are some oddball problems although this time they appear to be purely Chrome issues. After the reinstall Chrome seems to pop up properly with ShellExecute() calls both in regular user and Admin mode. However, it now looks like Chrome is actually running two completely separate user profiles for each. For example, when I run Visual Studio in Admin mode and go to View in browser, Chrome complains that it was installed in Admin mode and can't launch (WTF?). Then you retry a few times later and it ends up working. When launched that way some of the plug-ins installed don't show up with the effect that sometimes they're visible sometimes they're not. Also Chrome seems to loose my configuration and Google sign in between sessions now, presumably when switching user modes. Add-ins installed in admin mode don't show up in user mode and vice versa. Ah, this is lovely. Did I mention that I freaking hate UAC precisely because of this kind of bullshit. You can never tell exactly what account your app is running under, and apparently apps also have a hard time trying to put data into the right place that works for both scenarios. And as my recent post on using Windows Live accounts shows it's yet another level of abstraction ontop of the underlying system identity that can cause all sort of small side effect headaches like this. Hopefully, most of you are skirting this issue altogether - having installed more recent versions of your favorite browsers. If not, hopefully this post will take you straight to reinstallation to fix this annoying issue.© Rick Strahl, West Wind Technologies, 2005-2012Posted in Windows  .NET   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • Use windows 7 inside virtual box,as guest i mean, to create a Windows 7 USB using "Windows 7 USB/DVD Download Tool" ? (Linux as host)

    - by Abel Coto
    I want to download the Windows 7 professional iso (x32), from microsoft, and , i can do two things. Or buy a new burner , as mine doesn't work (i am trying to decide what dvd writer i could buy) or use a usb dongle to copy the iso to it , and install it via usb. I want to install Windows 7 in a netbook that now has debian,and in my pc. I think i have to buy only the license for the pc , as the netbook came with windows 7 preinstalled, so i suppose that i can use that serial to activate the windows , although i don't know how to install windows 7 starter instead of professional (i think if you remove a file from the iso, windows let you choose the edition to install). The problem is that in both pcs there isn't any windows , only debian. My father has a netbook with windows 7 starter, but i think it hasn't antivirus (at least until have the Karspersky Internet security for 3 pcs bought ), and i don't trust to make the usb there , if i don't now that there isn't any virus or malware. So i am trying to find a way of Create a Windows 7 usb installation , to at least be able to install windows 7 in the netbook without a external dvd writer. I know that with dd in linux you can copy a debian.iso to the usb , and then install debian with it (i've done it) using something like dd if=win7.iso of=/dev/sdb, but i don't know if this would work for windows 7 iso,and if dd will correctly copy the iso to the usb. I suppose that if you are able to boot and install windows 7 from the usb , is that the method works,and you can forget of problems later with the windows 7 installation (problems because some files could not be copied or like). So , i remembered that Microsoft created a tool to copy the iso to the usb using windows. So i thought that i could install in my pc , virtual box , as i have VT and 8 GB ram in it, and download the iso from microsoft ,install windows 7 in the virtual machine , and then copy the iso inside the machine , donwload the iso tool, and atach a usb to the pc, connect it to the guest , and use the tool to copy the iso to the USB. But i don't now if is possible to use a virtual machine to do this , or the virtualization could give problems with the usb, or something. I have found some minutes ago this How to make a windows 7 usb flash install media, from linux? The first method (dd) is the one i like more , and i trust more ( i don't now if the second method using ms-sys , works well , and if i can trust it. I understand that a iso is like a .rar , but no compressed,only containing the files ,so mount the iso and cp the data inside perhaps is ok. Although the method i like more is the microsoft one (more because is from microsoft , and i suppose they now what they do ,at least with this usb related thing, than anything). Perhaps worth more to buy a external dvd writer haha ... Should the virtual machine method work ?

    Read the article

  • How to restore OEM software after upgrade from Vista to WIndows 8 on Notebook, Aspire 6935G

    - by Rocky
    Recently I upgraded my notebook from Vista home premium to windows 8 pro, now after updating most of the preinstalled programs by Acer, I've found out they are not restored as before. For example, I can't access my hidden hard disk drive utility, finger print scanner, etc. Please tell me how to restore all these programs by Acer on Windows 8 pro which were originally available when I purchased my notebook with Vista.

    Read the article

  • Holding off Windows 2000/3 Server in Shutdown

    - by user1668993
    We have a C# VS2010 application running on a Windows 2000 Server box (there is also a Windows 2003 Server box) as pretty much the only application running. We remove power from the box. There is a short duration battery (maybe 3 minutes of power) which then waits 10 seconds and then decides things are coming down and notifies Windows that it needs to shut down. Windows sends a CTRL_SHUTDOWN_EVENT event to the application which fields it and tries to keep Windows from going down for a while to let another computer which communicates with this one time to do some file work on the first computer. It does this by a timing loop and after the loop is over, it exits gracefully and the computer shuts down. Nice plan but it doesn't work. The application gets to maybe 20 seconds and the application is forcibly killed by Windows and Windows shuts down. At 90 seconds, the hardware firmware running the battery turns off power to the computer. I have tried searching to find out how to hold off Windows for a bit of time. I tried creating (it wasn't there) the HKEY_LOCAL_MACHINE subtree: \SYSTEM\CurrentControlSet\Control\WaitToKillAppTimeout registry key to 60000 but though it seemed to keep the popup from happening, Windows itself died at about the same amount of time -- we think without having the opportunity to shut itself down gracefully. Maybe the registry key worked but wasn't enough. Basically I have an "ill-mannered" application which is refusing to shut down (for the best of reasons) and without the registry key thing, Windows eventually shuts it down anyway and then shuts itself down. With the registry change, we think what is happening is that Windows doesn't shut down the application but Windows itself is killed suddenly without shutting down but power is still not pulled for about another minute, and then power is pulled. So maybe we have layers here. First there is how long the application tries to stay open. Then there is how long Windows is prepared to allow it to stay open. Then there is ... something... which kills windows. Then there is the power loss. Anyone have any ideas how we can get windows to stay open and in operation say to 70 seconds instead of about 20? Is our registry key right, but not enough? Is there some additional key we need to set to determine how long after windows is notified of a shutdown before it just kills itself? Thanks in advance.

    Read the article

  • API to toggle "Show hidden files, folders and drives"

    - by dbkk
    Is there a function in Windows API to toggle the "Show hidden files, folders and drives" option in Windows Explorer (Tools Folder Options... View tab). I know of a related registry key, but changing that would not have immediate effect. The key is: HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/Windows/CurrentVersion/Explorer/Advanced/Folder/Hidden/SHOWALL Trying to do this from C#, but the question is not language-specific.

    Read the article

  • C# differences between Windows Mobile and regular Windows

    - by Matt
    Are there many differences between Windows and Windows Mobile as far as C# programming is concerned? I can write some moderately complicated programs in C#, but I'm not sure if it would just run perfectly on a Windows smartphone, or if something has to be done to port it. If so, is there a tool that will automatically revise code to make it mobile-compatible? The reason I ask is that the new Windows mobile 7 will only support a few methods of app development, one of which is C#. Also, do smartphones with non-windows operating systems have C# support available? Or can C# code be converted to Symbian or iPhone or whatever? Thanks for any help you can provide.

    Read the article

  • MSI File/Registry failures to Windows Server 2008/Windows 7

    - by Luca
    I'm trying to deploy an application on Windows Server 2008 (SP2 x64) and Windows 7 (x64), using VS2005 Installer Project. The MSI version (I think) it the 2.0. Everything works fine, except that some registry keys and some files are not copied on the install machine. The MSI system doesn't notify about nothing (and I don't know whether MSI logs its operations). Are there incompatibilities between my MSI installer project and these new OSes? It seems to me that the OS protect itself for being modified in some part. For example, I'm trying to set the registry keys: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\WinLogon\SpecialAccounts\UserList\User but it is not created. In the same installer there are many other keys, which are created like expected (as they always did before on Windows XP and Windows Server 2003). What's going on?

    Read the article

  • Upgrade Centos 5 tot PHP 5.2 or 5.3 [recommended way?]

    - by solid
    We are using Zend Framework and in version 2, php 5.2 will be the minimum requirement. We love CentOS and we'd like to keep using it, but PHP 5.1 just won't do anymore when developing web applications with Zend framework. I found several links to solutions to upgrade with external repositories. http://serverfault.com/questions/106801/recommended-method-to-upgrade-php-5-1-6-to-5-2-x-on-centos-5 http://www.webtatic.com/blog/2009/05/installing-php-526-on-centos-5/ http://www.webtatic.com/blog/2009/06/php-530-on-centos-5/ We'd like to see another solution with the use of an "official?" CentOS repository if any is available. We only need to upgrade PHP, the rest of the CentOS setup is fine the way it is. For us, it's important however to keep the YUM cycle intact using the normal repositories. So in short: is it even possible to upgrade only PHP by using an external repo or otherwise? While still upgrading all our other packages safely through normal yum usage? Thanks for your help!

    Read the article

  • Ubuntu in failed state after upgrade from 10.04 to 10.10 - How to recover?

    - by Harvey
    I was running Ubuntu 10.04 and attempted to upgrade to 10.10. I have a really slow connection (DSL 128kbits/sec) and copying the upgrade files took about 26 hours. I of course let it run unattended. When I came back, I notice the following 3 dlgs: 1. Could not install the upgrades The upgrade has aborted. Your system could be in an unusable state. A recovery will run now (dpkg -- configure -a). 2. gpk-update-icon Distribution upgrades available maverick 10.10 (stable) [more information] [Do no show this again] [Cancel] [Ok] 3. gpk-update-icon Security updates available The following important updates are available for your computer: libwebkit-1.0-2-dbg - Web content engine library for Gtk+ - Debugging symbols libcupsimage2 - Common UNIX Printing System(tm) - Raster image library ... What is the best response to all of this? I went through something similar in an attempted network upgrade from 8.04 to 10.04 and had to reload the unbootable machine fresh from distribution media (all data was lost). I'd like to avoid that here. I have not yet responded to the dialogs, and want to make sure the system is still bootable and not lose my data this time.

    Read the article

  • Windows Server 2008 R2 LDAPS

    - by Chad Moran
    I have a Server 2008 R2 server with ADDS installed. I'm trying to configure HP's ILO utility to connect to it over SSL. I installed the Active Directory Certificate Service, after doing so I'm still not able to connect to LDAP over SSL. I checked the event log and it's showing warnings with Event ID 36886 saying that there aren't default credentials yet. I'm not too sure why this is happening. I haven't done anything with ADCS other than installing the service do I need to create a certificate for the server?

    Read the article

< Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >